Scribd
Upload
1K views

01-05 Classmark Update Procedure

The document describes the classmark update procedure in GSM networks. It contains the following key points: 1. The classmark identifies the capabilities of a mobile station (MS) and can include classmark 1, 2, and 3. The network can request an MS to report its classmark 3. 2. The classmark update procedure is initiated when the MS sends a Classmark Change message to the base station subsystem (BSS) containing its updated classmarks. 3. The BSS then sends a Classmark Update message to the mobile switching center (MSC). The MSC can also initiate the procedure by requesting the BSS to query the MS for its classmarks.

Uploaded by

alimola1248
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

01-05 Classmark Update Procedure

The document describes the classmark update procedure in GSM networks. It contains the following key points: 1. The classmark identifies the capabilities of a mobile station (MS) and can include classmark 1, 2, and 3. The network can request an MS to report its classmark 3. 2. The classmark update procedure is initiated when the MS sends a Classmark Change message to the base station subsystem (BSS) containing its updated classmarks. 3. The BSS then sends a Classmark Update message to the mobile switching center (MSC). The MSC can also initiate the procedure by requesting the BSS to query the MS for its classmarks.

Uploaded by

alimola1248
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

M900/M1800 Base Station Subsystem Signaling Analysis Manual

Contents

Contents
5 Classmark Update Procedure...................................................................................................5-1
5.1 Classmark Overview .....................................................................................................................................5-2 5.2 Classmark Update Procedure ........................................................................................................................5-2

Issue 02 (2007-06-30)

Huawei Technologies Proprietary

Figures

M900/M1800 Base Station Subsystem Signaling Analysis Manual

Figures
Figure 5-1 Classmark update procedure.............................................................................................................5-2

ii

Huawei Technologies Proprietary

Issue 02(2007-06-30)

M900/M1800 Base Station Subsystem Signaling Analysis Manual

5 Classmark Update Procedure

5
About This Chapter
Section 5.2 Classmark Update Procedure

Classmark Update Procedure

The following table lists the contents of this chapter. Describes The function of the classmark and the relevant GSM protocols. The classmark update procedure and the relevant functions of the signaling.

5.1 Classmark Overview

Issue 02 (2007-06-30)

Huawei Technologies Proprietary

5-1

5 Classmark Update Procedure

M900/M1800 Base Station Subsystem Signaling Analysis Manual

5.1 Classmark Overview


Classmark specifies the service capability, supported frequency bands, power capability, and encryption capability of an MS in the Global System for Mobile communications (GSM). The classmark of an MS can be classified into classmark 1, classmark 2, and classmark 3. The network can identify the capabilities of an MS by querying its classmark. The network can also request an MS to report its classmark 3 by setting the Early Classmark Sending Control (ECSC) parameter once the connection between an MS and the network is established. Because the main information in classmark 3 applies to dual-band networks, the GSM equipment should support the processing of MS classmarks. Huawei's GSM equipment can process the ECSC and classmark 3 of an MS. For details about the classmark update procedure, refer to GSM Rec. 04.18.

5.2 Classmark Update Procedure


Signaling Procedure
Figure 5-1 shows the classmark update procedure. : Figure 5-1 Classmark update procedure
MS BSS System Information Type 3 ECSC BCCH SABM SDCCH Classmark Change(1) SDCCH Classmark Request(3) Classmark Enquiry(4) main DCCH Classmark Change(5) main DCCH Classmark Update(6) Complete Layer 3 Inforamtion Classmark Update(2) MSC

If the ECSC is allowed in System Information Type 3, an MS (dual-band MS or vehicle mounted MS) can initiate a classmark update procedure by sending a Classmark Change message on the dedicated channel allocated by the network. The Classmark Change message contains the updated classmark 2 information element of the MS. It may also contain a classmark 3 information element.

5-2

Huawei Technologies Proprietary

Issue 02(2007-06-30)

M900/M1800 Base Station Subsystem Signaling Analysis Manual

5 Classmark Update Procedure

Step 1 Upon receipt of the Classmark Change message from the MS, the BSS sends a Classmark Update message. This message contains classmark 2 information element and classmark 3 information element of the MS. The Classmark Update is a bi-directional message. Step 2 When a Mobility Management (MM) connection is established between the MS and the MSC, the MSC can initiate a classmark update procedure by sending a Classmark Request message on the Signaling Connection Control Part (SCCP) to the BSS. Step 3 Upon receipt of the Classmark Request from the MSC, the BSS either takes no action or takes the following actions: Sends a Classmark Update message to the MSC Sends a Classmark Enquiry message to the MS Step 4 Upon receipt of the Classmark Enquiry message from the BSS, the MS returns a Classmark Change message to the BSS. The Classmark Change message contains the updated classmark 2 message of the MS. It may also contain the classmark 3 message. Step 5 Refer to Step 1. ----End

Procedure Explanation
Figure 5-1 is divided into the following three parts by the broken lines: The upper section defines whether the ECSC is supported in System Information Type 3. The middle section shows the classmark update procedure initiated by the MS when the ECSC is enabled. : The lower section shows the classmark update procedure initiated by the MSC.

Issue 02 (2007-06-30)

Huawei Technologies Proprietary

5-3

You might also like