iSitePower Outdoor Series
MTS9304A-HX10A1-5308-002
Introduction
Optional Parts Mandatory Part
MTS9304A-HX10A1 is a new type of split AC/DC output power system
designed by Huawei to support 5G network. With the features of end- Heat Exchange
Expansion Module
to-end high efficiency, supporting modular evolution, intelligent peak
shaving and intelligent staggering power, full digitalization and
intelligentization. It is suitable for scenarios such as 2/3/4G wireless site
new-built, 5G expansion and 5G wireless site new-built.
NetEco
Features
⚫ Support fast 5G expansion: -57VDC constant voltage output solves
Features
the problem of 5G high power consumption AAU remote power
supply, the maximum 2.5kW heat dissipation satisfy 2/3/4/5G co-
deployment
⚫ System-level efficiency and energy saving: efficient conversion,
efficient power distribution, and efficient energy storage Complete Solution
(refer to the actual configuration for optional accessories)
⚫ Supports smooth evolution: the innovative architecture design
enables smooth expansion of rectifier, power distribution, and heat
dissipation modules
⚫ Intelligent peak shaving enables grid free from modernization
⚫ Intelligent staggering power unleash the potential of sites: grid
adaptive adjustment, make full use of difference between peak and
valley power price, reduce electric cost
⚫ Intelligent management: online remote maintenance reduces site
visits and maintenance costs
Scenarios
⚫ New-built outdoor 2/3/4G wireless site, accessing 5G in future
⚫ Outdoor enterprise communication network
Specifications
Product Type MTS9304A-HX10A1
Cabinet: 650mm × 650mm × 1000mm (include base)
Dimension (W × D × H) Top heat exchanger (optional): 650mm × 650mm × 250mm
Base: 650mm × 650mm × 100mm
Weight ＜80kg (without rectifier module, top heat exchanger or packaging)
Cooling mode Power cabin: heat exchange (150W/K is standard, 100W/K is optional expansion module)
Installation mode Grounding\ rooftop\ wall against\ stacking with battery cabin
Cabling mode At the bottom, inlet/outlet downwards
System
Maintenance mode In front
Noise level Satisfied GR487, noise ≤ 65dBA @ 1.5m, 45℃
Protection level IP55
User space 13U
MTBF ≥200,000 hours
Height of power embedded
3U
power *
Number of module slots * 6
Input mode Dual-live wire compatible with three-live-wire and three-phase
Input voltage Dual-live and three-live-wire 200VAC - 240VAC；three-phase：346VAC~415VAC
Input frequency 45Hz - 65Hz, rated value: 50Hz/60Hz
AC Input capacity 1×125A/3P MCB
Distribution
SPD Nominal lightning strike discharge current 30kA (8/20μs);
AC output 1 pcs of AC output box with 1×16A/1P MCB, 1 pcs all-purpose maintenance socket
Normal mode: 42VDC - 58VDC, rated value: 53.5VDC
Output voltage
Voltage boosting mode: 57VDC constant (must integrate with BoostLi lithium battery)
Dual-live wire: 18kW
Maximum capacity
Three-live-wire and three phase: 24kW
DC Battery branch 4×125A MCB(Default configuration, installed on the side)
Distribution LLVD branch 2×125A MCB, 3×63A MCB
BLVD branch 2×63A MCB, 2×32A MCB, 2×16A MCB
Nominal lightning strike discharge current: Differential mode - 10kA (8/20μs);
SPD
Common mode - 20kA (8/20μs)
Type R4875G1
Input voltage 85VAC - 300VAC, rated 220VAC
4000W (176VAC - 300VAC)
Rated power
4000W - 1600W (176VAC - 85VAC linear derating)
Maximum 97%
Efficiency
≥ 96% (230VAC, 30% - 80% load rate)
Rectifier
Working temperature -40℃ to +75℃
Dimension (W × D × H) 105mm × 269mm × 40.8mm
Weight ≤2.2kg
Power factor ≥0.99
THD ≤5%
2 AI (battery temp., ambient temp.)
Signal input
4 DI (gate, smoke, water, 1 reserved )
Alarm output 8 DO
Controller Communication port RS232, RS485, CAN，FE
Storage capacity Up to 1000 historical records
Display mode LCD
Operating temperature -40℃ to +45℃ (+ solar radiation)
Storage temperature -40℃ to +70℃
Environment Operating humidity 5% - 95% (non-condensing)
0 - 4000m (High temperature derating in the environment of 2000m - 4000m, the operating temperature is reduced by
Altitude
1℃ for every 200m increase)
Specifications – Optional Accessories
Heat exchange expansion
Maximum support 1pcs, 100W/K cooling capacity
module
Indoor Blade (DC Version, 1U Maximum support 1pcs, with maximum 6kW load Note: Optionally installed when power capacity is enough,
Optional
height) capacity & 5×40A FUSE but need provide power for large-power remote AAU/RRU
Hardware
DC Distribution Expansion Secondary load: 6 × 63A MCB，4 × 32A MCB
Note: 1U height, 19-inch rack installation, used for DC
Box Important load: 2 × 32A MCB，2 × 20A MCB，
output expansion
(DCDB48-200-16B) 2 × 16A MCB
Support -57VDC constant voltage output by software configuration,
Intelligent boosting
suitable for high power load and long distance power supply
When the peak load exceeds commercial power supply, the power system
Note: must integrate with BoostLi
Intelligent peak shaving can control the battery to discharge and share the burden, reducing the
Optional Software peak load of grid power
lithium battery
Features
Grid adaptive adjustment, make full use of the difference between peak
Intelligent staggering power
and valley power price, reduce electric cost
Support NetEco, can perform statistical analysis on energy efficiency of single station and the whole network, can carry
Intelligent management
out targeted upgrades and improve the operation efficiency, reduce maintenance cost
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Huawei Industrial Base
General Disclaimer Bantian Longgang
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, Shenzhen 518129, P.R. China
future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an Tel: +86-755-28780808
acceptance. Huawei may change the information at any time without notice.
www.huawei.com
