android-kmsg.txt file too large, trunc it.

------ KERNEL LOG START at 2022-12-15 12:53:30 ------

<3>[90355.401153] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend

<3>[90355.401967] (2)[23436:kworker/u16:0][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90355.402834] (2)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90355.402940] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90355.402995] (1)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<6>[90355.403383] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90355.403402] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90355.403428] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90355.404137] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217353746000000 to 2022/12/15 05:37:07 (now = 2022/12/15 05:35:55)
<5>[90355.404246] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:08 (1)
<5>[90355.407694] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90355.408092] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90355.408123] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90355.408132] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90355.408226] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90355.408262] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90355.408301] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90355.408301]
<6>[90355.408321] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90355.408321]
<6>[90355.408339] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90355.408339]
<6>[90355.408357] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90355.408357]
<6>[90355.408460] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90355.408498] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90355.408519] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90355.409073] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90355.409144] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90355.409338] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90355.409646] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90355.409664] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90355.410040] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90355.410056] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90355.410489] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90355.410848] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,804 us
<6>[90355.411563] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90355.411816] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90355.411926] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90355.412286] (2)[10823:Binder:636_2]suspend of devices complete after 52.502
msecs
<6>[90355.417083] (2)[10823:Binder:636_2]late suspend of devices complete after
4.772 msecs
<4>[90355.417107] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90355.421119]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90355.421825] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90355.422122] (1)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90355.422851] (2)[10823:Binder:636_2]noirq suspend of devices complete after
5.100 msecs
<6>[90355.422916] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90355.422916] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90355.422916] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90355.422984] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90355.422984] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90355.422984] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90355.422984] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90355.422984] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90355.422984] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 714449, r13 = 0x84000880, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247c7ff, req_sta = 0x3c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xc0cd9b1f, wlk_cntcv_h = 0x291, 26M_off_pct =
41
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 21.803 seconds
<4>[90355.422984] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90355.422984] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90355.422984] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90355.422984] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90355.422984] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90355.422984] -(2)[0:swapper/2]Call trace:
<4>[90355.422984] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90355.422984] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90355.422984] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90355.422984] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90355.422984] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90355.422984] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90355.422984] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90355.422984] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90355.422984] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90355.422984] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90355.422984] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90355.422984] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90355.422984] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90355.422984] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90355.422984] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90355.422984] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90355.422984] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90355.422984] -(2)[0:swapper/2]---[ end trace 308173880bd0bf5e ]---
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 284684 (32k)
<4>[90355.422984] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 8.687/22.040/22.040/8.814/22.2040 seconds
<6>[90355.422984] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90355.423107] -(2)[0:swapper/2][SCP] ipi id/type/action/event/reserve =
3/77/6/4/0
<6>[90355.423146] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x1980000, 0x0)
<6>[90355.423186] -(2)[0:swapper/2]i2c no need switch top pll
<6>[90355.424893] (1)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_resume
<5>[90355.425819]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90355.425843] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90355.427948] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90355.433668] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.702 msecs
<6>[90355.434170] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd]
<4>[90355.434190] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90355.439080] (2)[10823:Binder:636_2]early resume of devices complete after
4.834 msecs
<5>[90355.439454] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90355.441314] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90355.441589] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90355.441626] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1421 us
<5>[90355.441860] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90355.442492] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90355.442517] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90355.442591] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90355.442619] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90355.442698] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90355.442886] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90355.442945] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90355.442965] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90355.443036] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90355.443072] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90355.443177] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90355.443200] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90355.443211] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90355.443340] (2)[10823:Binder:636_2]zcvf, no update time:45 96 avgc:0
avgc_thread
<5>[90355.443365] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90355.445083] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90355.446087] (2)[7305:kworker/2:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90355.446173] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90355.446519] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90355.446549] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90355.447186] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90355.447333] (2)[30082:kworker/2:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90355.449054] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90355.449353] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90355.450204] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90355.450810] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90355.451438] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90355.453708] (1)[10823:Binder:636_2]resume of devices complete after 14.598
msecs
<3>[90355.458385] (1)[7386:kworker/1:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90355.458411] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<6>[90355.459019] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90355.459043] (1)[7386:kworker/1:0]Restarting tasks ...
<3>[90355.459142] (1)[7386:kworker/1:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90355.459174] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90355.466741] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90355.466817] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90355.467077] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90355.468308] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217361532000000
<4>[90355.481030] done.
<5>[90355.481061] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90355.481079] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90355.488869] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90355.494378] (7)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10172929,5289,9635scp1 sleep state: 54580,23315,23315
<6>[90355.494402] (7)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90355.494402]
<5>[90355.494411] (7)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90355.494419] (7)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90355.494432] -(7)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90355.494439] (7)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90355.495435] (7)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90355.495686] -(7)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90355.496233] (7)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90355.496261] (7)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:36:17.914030048 UTC
<6>[90355.496393] (7)[26627:kworker/7:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/7:1><0x6803>
<6>[90355.496438] (7)[26627:kworker/7:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90355.496444] (7)[26627:kworker/7:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<36>[90355.496450] (0)[576:logd.auditd]type=1400 audit(1671082577.908:1622945):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90355.496482] (7)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90355.497081] (7)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005b62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90355.497106] (7)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90355.501185] (7)[10823:Binder:636_2]PM: suspend exit
<6>[90355.520468] (2)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(5/10/0)(69)
<3>[90355.535511] (2)[30082:kworker/2:1]typec_cc_orientation = 2
<6>[90355.602745] (6)[10823:Binder:636_2]active wakeup source: main
<6>[90355.602777] (6)[10823:Binder:636_2]active wakeup source: usb
<6>[90355.602814] (6)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90355.640885] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90355.692148] (2)[30082:kworker/2:1]chg_type = 0, hvdcp_type = 0
<6>[90355.694338] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90355.695003] (4)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<3>[90355.743383] (2)[30082:kworker/2:1]get_connector_temp: connector_temp:322
<6>[90355.743537] (2)[30082:kworker/2:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90355.743577] (2)[30082:kworker/2:1]mt_charger_plugin plugin:0
<6>[90355.795779] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90355.798330] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:00000000cad3e3e9 triggered!
<6>[90355.798797] (2)[559:lmkd]psi_trigger_poll: t:00000000cad3e3e9 triggered!
<6>[90356.064077] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90356.064125] (0)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90356.064361] (0)[19178:kworker/u16:2]PM: ++
<7>[90356.074122] (0)[19178:kworker/u16:2]PM: --
<4>[90356.174052] done.
<6>[90356.180442] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10172946,5298,9654scp1 sleep state: 54582,23315,23315
<6>[90356.180476] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90356.180476]
<6>[90356.180501] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90356.180501]
<6>[90356.180525] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90356.180525]
<6>[90356.180547] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90356.180547]
<5>[90356.180569] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90356.180587] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90356.180627] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90356.180657] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90356.181147] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90356.181184] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:36:18.598958048 UTC
<6>[90356.181630] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90356.181690] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005b62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90356.181719] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90356.181743] (0)[613:teei_daemon]Freezing user space processes ...
<5>[90356.183268] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90356.184864] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90356.184892] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90356.211714] (elapsed 0.029 seconds) done.
<6>[90356.211750] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90356.211771] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90356.268905] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90356.268962] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90356.269040] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90356.270579] (0)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90356.270771] (1)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90356.270854] (3)[7608:kworker/u16:11]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90356.271366] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90356.271494] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90356.271531] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90356.272475] (4)[23443:kworker/u16:5][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90356.273167] (4)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90356.273181] (0)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90356.273198] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<6>[90356.274224] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90356.274254] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90356.274352] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90356.275223] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217353746000000 to 2022/12/15 05:37:07 (now = 2022/12/15 05:36:18)
<5>[90356.275343] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:08 (1)
<5>[90356.279218] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90356.279688] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90356.279730] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90356.279743] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90356.279865] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90356.279912] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90356.279961] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90356.279961]
<6>[90356.279984] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90356.279984]
<6>[90356.280006] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90356.280006]
<6>[90356.280029] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90356.280029]
<6>[90356.280160] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90356.280203] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90356.280227] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90356.280898] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90356.280986] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90356.281221] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90356.281584] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90356.281606] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90356.282080] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90356.282098] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90356.282598] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90356.282931] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,846 us
<6>[90356.283834] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90356.284137] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90356.284268] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90356.284711] (3)[10823:Binder:636_2]suspend of devices complete after 55.617
msecs
<6>[90356.290652] (3)[10823:Binder:636_2]late suspend of devices complete after
5.908 msecs
<4>[90356.290681] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90356.295658]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90356.296318] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90356.296700] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90356.297497] (3)[10823:Binder:636_2]noirq suspend of devices complete after
6.046 msecs
<6>[90356.297566] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90356.297566] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90356.297566] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90356.297645] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90356.297645] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90356.297645] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90356.297645] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90356.297645] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90356.297645] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 723948, r13 = 0x84000880, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7fb, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xd29a4f47, wlk_cntcv_h = 0x291, 26M_off_pct =
95
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 22.093 seconds
<4>[90356.297645] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90356.297645] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90356.297645] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90356.297645] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90356.297645] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90356.297645] -(3)[0:swapper/3]Call trace:
<4>[90356.297645] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90356.297645] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90356.297645] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90356.297645] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90356.297645] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90356.297645] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90356.297645] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90356.297645] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90356.297645] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90356.297645] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90356.297645] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90356.297645] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90356.297645] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90356.297645] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90356.297645] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90356.297645] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90356.297645] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90356.297645] -(3)[0:swapper/3]---[ end trace 308173880bd0bf5f ]---
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 682116 (32k)
<4>[90356.297645] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 20.816/21.762/21.762/21.397/21.1762 seconds
<6>[90356.297645] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90356.297771] -(3)[0:swapper/3][SCP] ipi id/type/action/event/reserve =
3/77/6/4/0
<6>[90356.297815] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x1980000, 0x0)
<6>[90356.297857] -(3)[0:swapper/3]i2c no need switch top pll
<6>[90356.300159] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_resume
<5>[90356.301121]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90356.301145] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90356.303350] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90356.309084] (3)[10823:Binder:636_2]noirq resume of devices complete after
10.268 msecs
<6>[90356.309723] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
<4>[90356.309747] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90356.315308] (3)[10823:Binder:636_2]early resume of devices complete after
5.500 msecs
<5>[90356.315693] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90356.317738] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90356.318064] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90356.318106] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1595 us
<5>[90356.318446] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90356.319009] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90356.319037] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90356.319167] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90356.319200] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90356.319294] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90356.319493] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90356.319557] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90356.319581] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90356.319666] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90356.319707] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90356.320153] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90356.320187] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90356.320201] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90356.320349] (1)[10823:Binder:636_2]zcvf, no update time:68 96 avgc:0
avgc_thread
<5>[90356.320377] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90356.322909] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90356.324055] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90356.324187] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90356.324500] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90356.324651] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90356.325376] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90356.325526] (1)[25366:kworker/1:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90356.327681] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90356.328005] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90356.328365] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90356.329077] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90356.330086] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90356.332470] (2)[10823:Binder:636_2]resume of devices complete after 17.128
msecs
<3>[90356.337182] (2)[7306:kworker/2:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90356.337211] (2)[7306:kworker/2:3][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90356.337873] (2)[7306:kworker/2:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90356.337894] (2)[7306:kworker/2:3][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90356.338095] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90356.338116] (1)[1016:mi_thermald]Restarting tasks ...
<5>[90356.344377] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90356.344452] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90356.344528] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90356.344575] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90356.344611] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90356.346157] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90356.346229] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90356.346449] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90356.347097] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217361532000000
<6>[90356.351419] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90356.360893] done.
<5>[90356.360928] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90356.360979] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90356.364826] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90356.371611] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10173440,5555,9937scp1 sleep state: 54584,23315,23315
<6>[90356.371640] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90356.371640]
<5>[90356.371655] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90356.371667] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90356.371689] -(2)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90356.371702] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90356.372740] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90356.373132] -(6)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90356.373480] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90356.373520] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:36:40.888166125 UTC
<6>[90356.373736] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<6>[90356.373817] (2)[7306:kworker/2:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90356.373830] (2)[7306:kworker/2:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90356.373846] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90356.373868] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005c62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90356.373894] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90356.376270] (2)[10823:Binder:636_2]PM: suspend exit
<3>[90356.415400] (1)[7388:kworker/1:3]typec_cc_orientation = 2
<6>[90356.477456] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90356.477502] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90356.477548] (2)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90356.525710] (1)[25366:kworker/1:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90356.573625] (1)[7388:kworker/1:3]chg_type = 0, hvdcp_type = 0
<3>[90356.625552] (1)[7388:kworker/1:3]get_connector_temp: connector_temp:322
<6>[90356.626000] (1)[7388:kworker/1:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90356.626771] (1)[7388:kworker/1:3]mt_charger_plugin plugin:0
<6>[90356.677536] (1)[25366:kworker/1:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90356.911807] -(3)[0:swapper/3]lvts_paused = 1
<6>[90356.930241] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90356.930397] (0)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90356.930630] (0)[7608:kworker/u16:11]PM: ++
<7>[90356.939674] (3)[7608:kworker/u16:11]PM: --
<4>[90357.040139] done.
<6>[90357.049751] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10173457,5563,9956scp1 sleep state: 54586,23315,23315
<6>[90357.049811] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90357.049811]
<6>[90357.049836] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90357.049836]
<6>[90357.049860] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90357.049860]
<6>[90357.049882] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90357.049882]
<5>[90357.049904] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90357.049923] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90357.049963] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90357.050015] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90357.050517] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90357.050553] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:36:41.565209433 UTC
<6>[90357.050767] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90357.050824] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005c62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90357.050851] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90357.050877] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90357.050961] (1)[576:logd.auditd]type=1400 audit(1671082601.560:1622948):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90357.052317] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90357.053856] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90357.053884] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90357.080965] (elapsed 0.030 seconds) done.
<6>[90357.081001] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90357.081021] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<5>[90357.119677] -(0)[0:swapper/0]lvts_paused = 1
<3>[90357.143364] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90357.143420] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90357.143498] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90357.145061] (3)[23438:kworker/u16:4]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90357.145437] (3)[7608:kworker/u16:11]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90357.145706] (0)[23437:kworker/u16:3]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90357.145759] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90357.146376] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90357.146414] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90357.147382] (3)[23438:kworker/u16:4][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90357.148018] (3)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<3>[90357.148093] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<3>[90357.148118] (0)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90357.149193] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90357.149221] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90357.149252] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90357.150079] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217353746000000 to 2022/12/15 05:37:07 (now = 2022/12/15 05:36:41)
<5>[90357.150197] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:08 (1)
<5>[90357.153683] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90357.154151] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90357.154192] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90357.154205] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90357.154388] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90357.154437] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90357.154486] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90357.154486]
<6>[90357.154509] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90357.154509]
<6>[90357.154530] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90357.154530]
<6>[90357.154552] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90357.154552]
<6>[90357.154676] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90357.154719] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90357.154745] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90357.155442] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90357.155530] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90357.155766] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90357.156143] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90357.156165] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90357.156624] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90357.156643] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90357.157127] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90357.157512] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,883 us
<6>[90357.158524] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90357.158823] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90357.158955] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90357.159391] (1)[10823:Binder:636_2]suspend of devices complete after 60.842
msecs
<6>[90357.165540] (1)[10823:Binder:636_2]late suspend of devices complete after
6.118 msecs
<4>[90357.165569] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90357.171821]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90357.172453] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90357.172832] (1)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90357.173640] (1)[10823:Binder:636_2]noirq suspend of devices complete after
6.990 msecs
<6>[90357.173712] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90357.173712] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90357.173712] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<5>[90357.173796] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90357.173796] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90357.173796] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 527514, r13 = 0x84000880, debug_flag =
0xf80618ff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7ff, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xdfc232a7, wlk_cntcv_h = 0x291, 26M_off_pct =
95
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 16.098 seconds
<4>[90357.173796] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90357.173796] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90357.173796] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90357.173796] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90357.173796] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90357.173796] -(1)[0:swapper/1]Call trace:
<4>[90357.173796] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90357.173796] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90357.173796] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90357.173796] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90357.173796] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90357.173796] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90357.173796] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90357.173796] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90357.173796] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90357.173796] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90357.173796] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90357.173796] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90357.173796] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90357.173796] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90357.173796] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90357.173796] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90357.173796] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90357.173796] -(1)[0:swapper/1]---[ end trace 308173880bd0bf60 ]---
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 489976 (32k)
<4>[90357.173796] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 14.952/15.430/15.430/15.093/15.5430 seconds
<6>[90357.173796] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90357.173922] -(1)[0:swapper/1][SCP] ipi id/type/action/event/reserve =
3/77/6/4/0
<6>[90357.173967] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x1980000, 0x0)
<6>[90357.174010] -(1)[0:swapper/1]i2c no need switch top pll
<6>[90357.176086] (1)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_resume
<5>[90357.177138]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90357.177163] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90357.179312] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90357.185157] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.391 msecs
<6>[90357.185800] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
<4>[90357.185824] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90357.191196] (1)[10823:Binder:636_2]early resume of devices complete after
5.312 msecs
<5>[90357.191645] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90357.193698] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90357.194015] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90357.194055] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1688 us
<5>[90357.194394] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90357.195025] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90357.195054] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90357.195136] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90357.195169] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90357.195258] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90357.195453] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90357.195510] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90357.195533] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90357.195616] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90357.195659] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90357.195778] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90357.195804] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90357.195817] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90357.195961] (1)[10823:Binder:636_2]zcvf, no update time:85 96 avgc:0
avgc_thread
<5>[90357.195989] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90357.199166] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90357.200206] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90357.200302] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90357.200606] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90357.200639] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90357.201442] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90357.201519] (1)[7387:kworker/1:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90357.203753] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90357.204260] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90357.205743] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90357.206190] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90357.206412] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90357.209245] (2)[10823:Binder:636_2]resume of devices complete after 18.014
msecs
<6>[90357.214506] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90357.214531] (2)[30082:kworker/2:1]Restarting tasks ...
<3>[90357.215118] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90357.215153] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90357.215850] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90357.215871] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90357.223114] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90357.223840] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90357.223943] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90357.224494] -(5)[1893:AlarmManager]alarmtimer_enqueue, 217361532000000
<4>[90357.237609] done.
<5>[90357.237644] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90357.237661] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90357.244938] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90357.246879] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10173825,5743,10156scp1 sleep state: 54588,23323,23323
<6>[90357.246907] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90357.246907]
<5>[90357.246922] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90357.246932] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90357.246952] -(0)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90357.246966] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90357.247869] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90357.248514] -(4)[406:EEMG_CTRL_GPU][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90357.248525] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90357.248557] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:36:57.865353203 UTC
<6>[90357.248740] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90357.248821] (0)[30807:kworker/0:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90357.248833] (0)[30807:kworker/0:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90357.248865] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005d62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90357.248883] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<36>[90357.248901] (1)[576:logd.auditd]type=1400 audit(1671082617.862:1622949):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90357.249197] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90357.251025] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90357.346445] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90357.352558] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90357.352588] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90357.352637] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90357.369145] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90357.398040] (1)[7387:kworker/1:2]typec_cc_orientation = 2
<3>[90357.449992] (1)[7387:kworker/1:2]chg_type = 0, hvdcp_type = 0
<6>[90357.501285] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90357.657226] (1)[7387:kworker/1:2]get_connector_temp: connector_temp:322
<6>[90357.657292] (1)[7387:kworker/1:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90357.657363] (1)[7387:kworker/1:2]mt_charger_plugin plugin:0
<12>[90357.667670] (1)[853:[email protected]]healthd: battery l=59 v=3940 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90357.667764] (1)[853:[email protected]]healthd: battery l=59 v=3940 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90357.674827] (1)[853:[email protected]]healthd: battery l=59 v=3940 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90357.717192] (1)[853:[email protected]]healthd: battery l=59 v=3940 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90357.717270] (1)[853:[email protected]]healthd: battery l=59 v=3940 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90357.724128] (1)[853:[email protected]]healthd: battery l=59 v=3940 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<5>[90357.759935] -(0)[0:swapper/0]lvts_paused = 1
<6>[90357.792037] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90357.792087] (1)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90357.792312] (1)[23437:kworker/u16:3]PM: ++
<7>[90357.801824] (2)[23437:kworker/u16:3]PM: --
<4>[90357.898548] done.
<6>[90357.904047] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10173840,5750,10174scp1 sleep state: 54589,23323,23323
<6>[90357.904082] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90357.904082]
<6>[90357.904107] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90357.904107]
<6>[90357.904131] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90357.904131]
<6>[90357.904153] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90357.904153]
<5>[90357.904175] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90357.904193] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90357.904228] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90357.904274] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90357.904560] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90357.904595] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:36:58.521401818 UTC
<6>[90357.904787] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90357.904845] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005d62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90357.904873] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90357.904897] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90357.905030] (2)[576:logd.auditd]type=1400 audit(1671082618.518:1622950):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90357.906161] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90357.907727] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90357.907755] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90357.934043] (elapsed 0.029 seconds) done.
<6>[90357.934083] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90357.934103] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90357.995065] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90357.995120] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90357.995200] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90357.996736] (1)[25368:kworker/u16:9]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90357.996906] (2)[23437:kworker/u16:3]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90357.997187] (2)[23444:kworker/u16:7]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90357.997279] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90357.997407] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90357.997443] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90357.998423] (2)[23444:kworker/u16:7][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90357.999383] (2)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90357.999399] (3)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90357.999538] (2)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90358.000003] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90358.000034] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90358.000065] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90358.000910] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217353746000000 to 2022/12/15 05:37:07 (now = 2022/12/15 05:36:58)
<5>[90358.001030] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:08 (1)
<5>[90358.004740] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90358.005288] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90358.005326] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90358.005338] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90358.005453] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90358.005499] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90358.005550] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90358.005550]
<6>[90358.005574] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90358.005574]
<6>[90358.005596] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90358.005596]
<6>[90358.005618] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90358.005618]
<6>[90358.005742] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90358.005785] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90358.005809] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90358.006551] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90358.006641] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90358.006878] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90358.007256] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90358.007279] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90358.007738] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90358.007757] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90358.008227] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90358.008608] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,865 us
<6>[90358.009474] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90358.009777] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90358.009913] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90358.010406] (0)[10823:Binder:636_2]suspend of devices complete after 58.974
msecs
<6>[90358.016074] (0)[10823:Binder:636_2]late suspend of devices complete after
5.634 msecs
<4>[90358.016102] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90358.020959]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90358.021633] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90358.021982] (3)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90358.022732] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.703 msecs
<6>[90358.022815] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90358.022815] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90358.022815] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90358.022901] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90358.022901] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90358.022901] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 315647, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xe7e22b8b, wlk_cntcv_h = 0x291, 26M_off_pct =
95
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 9.632 seconds
<4>[90358.022901] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90358.022901] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90358.022901] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90358.022901] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90358.022901] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90358.022901] -(0)[0:swapper/0]Call trace:
<4>[90358.022901] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90358.022901] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90358.022901] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90358.022901] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90358.022901] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90358.022901] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90358.022901] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90358.022901] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90358.022901] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90358.022901] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90358.022901] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90358.022901] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90358.022901] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90358.022901] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90358.022901] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90358.022901] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90358.022901] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90358.022901] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90358.022901] -(0)[0:swapper/0]---[ end trace 308173880bd0bf61 ]---
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 282284 (32k)
<4>[90358.022901] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 8.614/8.960/8.960/8.730/8.8960 seconds
<6>[90358.022901] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90358.022901] -(0)[0:swapper/0]EINT 222 is pending
<6>[90358.023044] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x1980000, 0x0)
<6>[90358.023089] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90358.023060] -(0)[0:swapper/0]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90358.024602] (3)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_resume
<5>[90358.025417]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90358.025445] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90358.027517] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90358.033246] (1)[10823:Binder:636_2]noirq resume of devices complete after
9.561 msecs
<6>[90358.033515] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90358.033623] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90358.033717] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90358.033758] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90358.033972] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
<4>[90358.033999] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90358.039180] (1)[10823:Binder:636_2]early resume of devices complete after
5.120 msecs
<5>[90358.039638] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90358.041626] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90358.041944] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90358.041985] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1658 us
<5>[90358.042330] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90358.042697] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90358.042723] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90358.042806] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90358.042839] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90358.042937] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90358.043134] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90358.043191] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90358.043214] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90358.043298] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90358.043342] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90358.043463] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90358.043488] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90358.043501] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90358.043646] (1)[10823:Binder:636_2]zcvf, no update time:95 96 avgc:0
avgc_thread
<5>[90358.043674] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90358.046817] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90358.047948] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90358.048042] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90358.048368] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90358.048403] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90358.049020] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90358.049178] (1)[7386:kworker/1:0][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90358.051337] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90358.051937] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90358.052897] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90358.053873] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90358.055038] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90358.058027] (0)[10823:Binder:636_2]resume of devices complete after 18.813
msecs
<3>[90358.062721] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90358.062746] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90358.063418] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90358.063439] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90358.063645] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90358.063664] (4)[1315:receiver]Restarting tasks ...
<6>[90358.072413] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90358.073102] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90358.073275] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217361532000000
<6>[90358.073742] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90358.081677] -(7)[30622:bt_hci_thread]alarmtimer_enqueue, 217362510000000
<4>[90358.087204] done.
<5>[90358.087245] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90358.087262] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90358.089239] (2)[853:[email protected]]healthd: battery l=59 v=3939 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90358.089315] (2)[853:[email protected]]healthd: battery l=59 v=3939 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<6>[90358.092741] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174070,5863,10305scp1 sleep state: 54591,23325,23325
<6>[90358.092769] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90358.092769]
<5>[90358.092785] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90358.092796] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90358.092817] -(2)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90358.092831] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90358.092943] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90358.093876] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90358.094098] -(6)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90358.094574] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90358.094614] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:08.347936587 UTC
<6>[90358.094797] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<6>[90358.094896] (2)[7306:kworker/2:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90358.094910] (2)[7306:kworker/2:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90358.094949] (6)[853:[email protected]]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<12>[90358.095092] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<36>[90358.095114] (2)[576:logd.auditd]type=1400 audit(1671082628.344:1622951):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90358.095393] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005d62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90358.095418] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90358.096262] (2)[10823:Binder:636_2]PM: suspend exit
<12>[90358.103067] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.7 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<3>[90358.140577] (1)[7386:kworker/1:0]typec_cc_orientation = 2
<6>[90358.198590] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90358.198638] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90358.198687] (1)[10823:Binder:636_2]active wakeup source: ttyC0
<4>[90358.246511] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 798,
590, 673, 594, 368, 265, 226, 117, success counter cpu: 98, 126, 65, 131, 60, 47,
28, 8, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 163, 199,
128, 229, 92, 53, 52, 10, o: 2-7, p: , f: , t: 90358376000000, 90358376000000,
90358374899999, 90358376510230, 90358399386768, 90358382516634, 90358940000000,
90358492000000,
<3>[90358.251447] (1)[7386:kworker/1:0]chg_type = 0, hvdcp_type = 0
<6>[90358.298362] (1)[25366:kworker/1:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90358.344948] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90358.345059] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90358.345117] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90358.345160] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<3>[90358.349419] (1)[7386:kworker/1:0]get_connector_temp: connector_temp:322
<6>[90358.349652] (1)[7386:kworker/1:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90358.349892] (1)[7386:kworker/1:0]mt_charger_plugin plugin:0
<6>[90358.377675] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90358.400608] (1)[25366:kworker/1:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90358.882043] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90359.038559] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90359.038609] (3)[6931:kworker/u16:8]PM: Syncing filesystems ...
<7>[90359.038867] (3)[6931:kworker/u16:8]PM: ++
<7>[90359.049199] (3)[6931:kworker/u16:8]PM: --
<5>[90359.094347] -(3)[0:swapper/3]lvts_paused = 1
<5>[90359.094437] -(3)[0:swapper/3]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 1,0,0,
LVTSMSRCTL1[10:0] = 0x4
<6>[90359.102538] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<6>[90359.135166] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:22%
<6>[90359.135229] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14922)
<6>[90359.135250] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90359.135260] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14922)
<6>[90359.135275] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90359.135283] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14922)
<6>[90359.135297] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33158,33534886,5449), tx=(12923,1984,10939), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90359.135377] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<4>[90359.146386] done.
<6>[90359.152554] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174094,5878,10329scp1 sleep state: 54593,23325,23325
<6>[90359.152590] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90359.152590]
<6>[90359.152615] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90359.152615]
<6>[90359.152638] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90359.152638]
<6>[90359.152659] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90359.152659]
<5>[90359.152682] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90359.152700] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90359.152737] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90359.152784] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90359.153098] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90359.153133] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:09.406466433 UTC
<6>[90359.153479] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90359.153539] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005d62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90359.153567] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90359.153592] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90359.153612] (0)[576:logd.auditd]type=1400 audit(1671082629.400:1622952):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90359.154986] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90359.156168] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90359.156196] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90359.183863] (elapsed 0.030 seconds) done.
<6>[90359.183901] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90359.183921] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.014 seconds) done.
<6>[90359.202608] (1)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3939,Cur:22,Temp:337,RM:2244,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90359.267080] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90359.267149] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90359.267226] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90359.268758] (2)[7608:kworker/u16:11]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90359.268930] (3)[6931:kworker/u16:8]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90359.269129] (0)[23444:kworker/u16:7]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90359.269468] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90359.269596] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90359.269633] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90359.270687] (2)[7608:kworker/u16:11][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90359.271363] (2)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<3>[90359.271388] (0)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90359.271444] (3)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<6>[90359.272312] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90359.272340] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90359.272370] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90359.273216] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217361532000000 to 2022/12/15 05:37:15 (now = 2022/12/15 05:37:09)
<5>[90359.273335] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:16 (1)
<5>[90359.276791] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90359.277237] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90359.277275] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90359.277287] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90359.277408] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90359.277454] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90359.277504] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90359.277504]
<6>[90359.277527] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90359.277527]
<6>[90359.277549] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90359.277549]
<6>[90359.277571] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90359.277571]
<6>[90359.277696] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90359.277741] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90359.277764] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90359.278517] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90359.278606] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90359.278845] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90359.279226] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90359.279248] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90359.279710] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90359.279729] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90359.280175] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90359.280520] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,805 us
<6>[90359.281383] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90359.281681] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90359.281813] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90359.282318] (1)[10823:Binder:636_2]suspend of devices complete after 78.643
msecs
<6>[90359.288041] (1)[10823:Binder:636_2]late suspend of devices complete after
5.690 msecs
<4>[90359.288069] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90359.292853]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90359.293483] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90359.293831] (3)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90359.294789] (1)[10823:Binder:636_2]noirq suspend of devices complete after
5.939 msecs
<6>[90359.294864] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90359.294864] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90359.294864] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<5>[90359.294946] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90359.294946] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90359.294946] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 220340, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24747ff, req_sta = 0x3c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xee151588, wlk_cntcv_h = 0x291, 26M_off_pct =
95
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 6.724 seconds
<4>[90359.294946] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90359.294946] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90359.294946] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90359.294946] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90359.294946] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90359.294946] -(1)[0:swapper/1]Call trace:
<4>[90359.294946] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90359.294946] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90359.294946] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90359.294946] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90359.294946] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90359.294946] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90359.294946] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90359.294946] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90359.294946] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90359.294946] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90359.294946] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90359.294946] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90359.294946] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90359.294946] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90359.294946] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90359.294946] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90359.294946] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90359.294946] -(1)[0:swapper/1]---[ end trace 308173880bd0bf62 ]---
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 171704 (32k)
<4>[90359.294946] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 5.239/5.488/5.488/5.302/5.5488 seconds
<6>[90359.294946] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90359.294946] -(1)[0:swapper/1]EINT 222 is pending
<6>[90359.295090] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x1980000, 0x0)
<6>[90359.295137] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90359.295103] -(1)[0:swapper/1]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90359.297646] (3)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_resume
<5>[90359.298994]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90359.299021] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90359.301005] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90359.306932] (2)[10823:Binder:636_2]noirq resume of devices complete after
11.034 msecs
<6>[90359.307193] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90359.307308] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90359.307425] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90359.307471] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90359.307552] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90359.307578] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90359.312616] (2)[10823:Binder:636_2]early resume of devices complete after
4.977 msecs
<5>[90359.313039] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90359.314899] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90359.315218] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90359.315256] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1536 us
<5>[90359.315526] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90359.315894] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90359.315919] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90359.316002] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90359.316034] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90359.316123] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90359.316319] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90359.316377] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90359.316399] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90359.316484] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90359.316526] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90359.316648] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90359.316674] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90359.316688] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90359.316846] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90359.320340] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90359.321405] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90359.321504] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90359.321838] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90359.321989] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90359.322612] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90359.322760] (3)[30055:kworker/3:0][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90359.324825] (3)[30055:kworker/3:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90359.325200] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90359.327467] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90359.327738] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90359.327985] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90359.331324] (2)[10823:Binder:636_2]resume of devices complete after 18.674
msecs
<3>[90359.336675] (2)[7306:kworker/2:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90359.336701] (2)[7306:kworker/2:3][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90359.337331] (2)[7306:kworker/2:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90359.337352] (2)[7306:kworker/2:3][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90359.337549] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90359.337568] (4)[1315:receiver]Restarting tasks ...
<6>[90359.344859] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90359.344879] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90359.345072] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90359.349178] -(1)[1893:AlarmManager]alarmtimer_enqueue: 3 callbacks suppressed
<5>[90359.349190] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217369201000000
<4>[90359.364307] done.
<5>[90359.364343] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90359.364355] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90359.370282] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174246,5956,10432scp1 sleep state: 54595,23325,23325
<6>[90359.370326] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90359.370326]
<5>[90359.370339] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90359.370350] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90359.370370] -(2)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90359.370382] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90359.371308] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90359.371353] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90359.371622] -(4)[406:EEMG_CTRL_GPU][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90359.372231] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90359.372278] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:16.353523279 UTC
<6>[90359.372470] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<36>[90359.372514] (0)[576:logd.auditd]type=1400 audit(1671082636.348:1622953):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90359.372561] (2)[7306:kworker/2:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90359.372573] (2)[7306:kworker/2:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90359.372604] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005d62],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90359.372622] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90359.372638] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90359.372948] (4)[915:HwBinder:896_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90359.384869] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90359.393675] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217369201000000
<6>[90359.405039] -(5)[7122:lowpool[174]][ccci1/dpmaif]tx0_resume_tx: 0xc0000,
0x1980000, 0x0
<6>[90359.407340] -(3)[22459:Binder:8139_5][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x1980000, 0x0
<3>[90359.411120] (3)[2356:kworker/3:5]typec_cc_orientation = 2
<5>[90359.441226] -(5)[1867:Binder:1454_3]alarmtimer_enqueue, 217369201000000
<6>[90359.474814] (6)[10823:Binder:636_2]active wakeup source: main
<6>[90359.474845] (6)[10823:Binder:636_2]active wakeup source: usb
<6>[90359.516721] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90359.569231] (3)[2356:kworker/3:5]chg_type = 0, hvdcp_type = 0
<3>[90359.620319] (3)[2356:kworker/3:5]get_connector_temp: connector_temp:322
<6>[90359.620504] (3)[2356:kworker/3:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90359.620539] (3)[2356:kworker/3:5]mt_charger_plugin plugin:0
<4>[90359.647150] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90359.647198] -(4)[7032:kworker/4:0]active wake lock : main,last_time:90359451
<6>[90359.672379] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90359.679448] -(2)[0:swapper/2][ccci1/dpmaif]tx1_resume_tx: 0x80000, 0x1980000,
0x0
<6>[90359.679495] -(2)[0:swapper/2][ccci1/dpmaif]clear txq1_resume_done: 0x80000,
0x40000, 0x0
<5>[90359.693147] -(7)[5449:Binder:1454_1C]alarmtimer_enqueue, 217369201000000
<5>[90359.694253] -(7)[5449:Binder:1454_1C]alarmtimer_enqueue, 217369201000000
<5>[90360.346094] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90360.346183] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90360.346332] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90360.346378] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90360.382561] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<6>[90360.397405] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90360.422964] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 220340, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24747ff, req_sta = 0x3c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90360.423083] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90360.465435] (3)[2356:kworker/3:5][bq27z561] fg_update_status:
SOC:59,Volt:3939,Cur:18,Temp:336,RM:2244,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90360.465621] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90360.466746] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90360.467530] (1)[118:pd_dbg_info]///PD dbg info 128d
<5>[90360.467555] (1)[118:pd_dbg_info]<90360.467>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90360.467555] <90360.467>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90360.478373] (3)[23446:kworker/3:1]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<6>[90360.702968] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90360.703011] (1)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90360.703235] (1)[23437:kworker/u16:3]PM: ++
<7>[90360.712197] (1)[23437:kworker/u16:3]PM: --
<4>[90360.811439] done.
<6>[90360.816784] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174276,5980,10468scp1 sleep state: 54597,23325,23325
<6>[90360.816816] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90360.816816]
<6>[90360.816841] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90360.816841]
<6>[90360.816863] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90360.816863]
<6>[90360.816885] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90360.816885]
<5>[90360.816907] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90360.816924] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90360.816958] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90360.816987] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90360.817321] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90360.817358] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:17.798619586 UTC
<6>[90360.817651] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90360.817709] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006163],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90360.817736] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90360.817759] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90360.817822] (2)[576:logd.auditd]type=1400 audit(1671082637.792:1622954):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90360.819652] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90360.820536] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90360.820572] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90360.845491] (elapsed 0.027 seconds) done.
<6>[90360.845529] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90360.845547] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90360.901162] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90360.901206] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90360.901268] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90360.902536] (1)[6931:kworker/u16:8]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90360.902858] (1)[23437:kworker/u16:3]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90360.903048] (2)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90360.903385] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90360.903487] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90360.903518] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90360.904268] (1)[6931:kworker/u16:8][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90360.905099] (1)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<3>[90360.905129] (2)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90360.905178] (1)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90360.905703] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90360.905727] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90360.905753] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90360.906527] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217369201000000 to 2022/12/15 05:37:23 (now = 2022/12/15 05:37:17)
<5>[90360.906641] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:24 (1)
<5>[90360.910041] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90360.910460] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90360.910495] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90360.910504] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90360.910602] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90360.910641] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90360.910681] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90360.910681]
<6>[90360.910700] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90360.910700]
<6>[90360.910718] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90360.910718]
<6>[90360.910737] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90360.910737]
<6>[90360.910839] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90360.910876] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90360.910897] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90360.911447] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90360.911518] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90360.911712] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90360.912031] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90360.912049] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90360.912429] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90360.912444] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90360.912849] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90360.913155] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,722 us
<6>[90360.914031] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90360.914334] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90360.914447] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90360.914811] (3)[10823:Binder:636_2]suspend of devices complete after 54.895
msecs
<6>[90360.920828] (3)[10823:Binder:636_2]late suspend of devices complete after
5.991 msecs
<4>[90360.920852] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90360.925884]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90360.926646] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90360.926986] (3)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90360.927686] (3)[10823:Binder:636_2]noirq suspend of devices complete after
6.211 msecs
<6>[90360.927749] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90360.927749] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90360.927749] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90360.927818] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90360.927818] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90360.927818] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90360.927818] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90360.927818] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90360.927818] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 189809, r13 = 0xc40019ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6747ff, req_sta =
0x1c000ff 0x0 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x784a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0xf3d6ba88, wlk_cntcv_h = 0x291,
26M_off_pct = 34
<6>[90360.927818] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x0
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 5.792 seconds
<4>[90360.927818] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90360.927818] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90360.927818] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90360.927818] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90360.927818] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90360.927818] -(3)[0:swapper/3]Call trace:
<4>[90360.927818] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90360.927818] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90360.927818] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90360.927818] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90360.927818] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90360.927818] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90360.927818] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90360.927818] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90360.927818] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90360.927818] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90360.927818] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90360.927818] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90360.927818] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90360.927818] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90360.927818] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90360.927818] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90360.927818] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90360.927818] -(3)[0:swapper/3]---[ end trace 308173880bd0bf63 ]---
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 65260 (32k)
<4>[90360.927818] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 1.991/5.933/6.343/2.116/6.6381 seconds
<6>[90360.927818] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90360.927940] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90360.927980] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90360.927942] -(3)[0:swapper/3]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90360.929671] (3)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_resume
<5>[90360.931073]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90360.931094] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90360.933010] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90360.938320] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.580 msecs
<6>[90360.938471] -(4)[0:swapper/4][ccci1/dpmaif]wake up by MD0 HIF L2(0/1)(3e0/0)!
<6>[90360.938504] (4)[0:swapper/4][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90360.939048] -(3)[10823:Binder:636_2][ccci1/dpmaif]tx0_resume_tx: 0x80000,
0x40000, 0x0
<6>[90360.939134] -(0)[0:swapper/0][ccci1/dpmaif]clear txq0_resume_done: 0x40000,
0x40000, 0x0
<6>[90360.939195] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] ccmni_md1
<4>[90360.939214] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90360.943943] (3)[10823:Binder:636_2]early resume of devices complete after
4.685 msecs
<5>[90360.944442] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90360.946338] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90360.946620] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90360.946654] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1494 us
<5>[90360.947258] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90360.947571] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90360.947592] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90360.947658] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90360.947686] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90360.947757] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90360.947921] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90360.947969] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90360.947988] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90360.948059] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90360.948095] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90360.948204] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90360.948225] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90360.948236] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90360.948362] (0)[10823:Binder:636_2]zcvf, no update time:7 96 avgc:0
avgc_thread
<5>[90360.948385] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90360.951394] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90360.952306] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90360.952389] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90360.952674] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90360.952703] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90360.953282] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90360.953439] (0)[30822:kworker/0:7][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90360.955144] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90360.955430] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90360.956807] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90360.957536] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90360.957928] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90360.960610] (7)[10823:Binder:636_2]resume of devices complete after 16.643
msecs
<3>[90360.962105] (7)[26627:kworker/7:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90360.962116] (7)[26627:kworker/7:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90360.962317] (7)[26627:kworker/7:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90360.962324] (7)[26627:kworker/7:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90360.962377] (7)[10823:Binder:636_2]OOM killer enabled.
<6>[90360.962383] (0)[1316:vdec_log_info]Restarting tasks ...
<6>[90360.965606] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90360.966590] done.
<5>[90360.966605] (7)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90360.966612] (7)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90360.966626] (0)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90360.967115] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<6>[90360.970263] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90360.977384] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90360.981713] (5)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174399,6054,10564scp1 sleep state: 54599,23325,23325
<6>[90360.981741] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90360.981741]
<5>[90360.981758] (5)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90360.981770] (5)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90360.981788] -(5)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90360.981801] (5)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90360.982394] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90360.982843] (5)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90360.983471] (5)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90360.983504] (5)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:23.760606740 UTC
<6>[90360.983656] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90360.983725] (5)[27096:kworker/5:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90360.983735] (5)[27096:kworker/5:3]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90360.983786] (2)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90360.983790] (2)[576:logd.auditd]type=1400 audit(1671082643.756:1622955):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90360.985470] (5)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90360.985505] (5)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90360.985527] (5)[10823:Binder:636_2]PM: suspend exit
<4>[90361.008634] -(7)[7419:Dns_158_10247]CPU7: update max cpu_capacity 934
<6>[90361.010307] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90361.010509] (6)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<5>[90361.013477] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<3>[90361.024690] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90361.030805] -(0)[5449:Binder:1454_1C]alarmtimer_enqueue, 217374982000000
<4>[90361.038606] -(6)[3752:main_thread]asicConnac2xFillCmdTxdInfo: 11 callbacks
suppressed
<5>[90361.042541] -(3)[3662:WifiScanningSer]alarmtimer_enqueue, 217374982000000
<3>[90361.043705] (0)[3064:kworker/0:0]typec_cc_orientation = 2
<6>[90361.051539] (4)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(70)
<6>[90361.087354] (2)[10823:Binder:636_2]active wakeup source: WLAN timeout
<6>[90361.087405] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90361.087418] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90361.087453] (2)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90361.087468] (2)[10823:Binder:636_2]active wakeup source: ccmni_md1
<6>[90361.149614] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90361.206374] (0)[3064:kworker/0:0]chg_type = 0, hvdcp_type = 0
<6>[90361.254357] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90361.305079] (0)[3064:kworker/0:0]get_connector_temp: connector_temp:322
<6>[90361.305152] (0)[3064:kworker/0:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90361.305224] (0)[3064:kworker/0:0]mt_charger_plugin plugin:0
<6>[90361.407277] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90361.493588] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90361.493730] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90361.493827] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90361.493880] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90362.015096] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<5>[90362.043971] -(0)[0:swapper/0]lvts_paused = 1
<6>[90362.079071] -(1)[0:swapper/1][bq27z561] fg_update_status:
SOC:59,Volt:3936,Cur:157,Temp:336,RM:2244,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90362.104158] -(1)[0:swapper/1]lvts_paused = 1
<5>[90362.104273] -(1)[0:swapper/1]Cnt= 10 LVTS TC 6, LVTSMSRCTL1[10,7,0] = 1,0,0,
LVTSMSRCTL1[10:0] = 0x4
<5>[90362.104321] -(1)[0:swapper/1]Cnt= 20 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<5>[90362.344761] -(2)[3662:WifiScanningSer]alarmtimer_enqueue, 217374982000000
<5>[90362.346562] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90362.346629] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90362.346668] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90362.346697] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90362.346782] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90362.393890] -(3)[1867:Binder:1454_3]alarmtimer_enqueue, 217482850000000
<5>[90362.396978] -(1)[1867:Binder:1454_3]alarmtimer_enqueue, 217482850000000
<6>[90362.416042] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90362.798328] -(0)[0:swapper/0]lvts_paused = 1
<6>[90363.038789] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<4>[90363.252324] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 608,
653, 780, 595, 253, 180, 126, 113, success counter cpu: 101, 119, 131, 111, 36, 23,
12, 8, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 194, 238,
213, 206, 85, 50, 25, 14, o: 0-2,4-7, p: , f: , t: 90363388000000, 90363378168846,
90363380579615, 90363404600538, 90363383683613, 90363452000000, 90363580000000,
90363548000000,
<6>[90363.424655] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90363.743450] (7)[26627:kworker/7:1]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90363.744107] (7)[31866:kworker/7:0]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<3>[90363.745338] (7)[26627:kworker/7:1]ghr: scsi_execute exit ret = 0x0
<3>[90363.745391] (7)[31866:kworker/7:0]ghr: scsi_execute exit ret = 0x0
<6>[90364.065976] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<5>[90364.350144] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90364.350361] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90364.350423] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90364.350466] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90364.434334] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90364.451956] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90364.547828] -(0)[1867:Binder:1454_3]alarmtimer_enqueue, 217378499000000
<6>[90364.551665] (2)[10823:Binder:636_2]last active wakeup source: eventpoll
<6>[90364.566191] -(2)[0:swapper/2][ccci1/dpmaif]tx1_resume_tx: 0x40000, 0x40000,
0x0
<6>[90364.568531] -(1)[5678:csj_MRC][ccci1/dpmaif]clear txq1_resume_done: 0x40000,
0x40000, 0x0
<6>[90364.653113] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90364.653156] (1)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90364.653420] (1)[23437:kworker/u16:3]PM: ++
<7>[90364.663649] (1)[23437:kworker/u16:3]PM: --
<4>[90364.758351] done.
<6>[90364.765468] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174640,6269,10800scp1 sleep state: 54601,23330,23330
<6>[90364.765511] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90364.765511]
<6>[90364.765535] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90364.765535]
<6>[90364.765558] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90364.765558]
<6>[90364.765579] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90364.765579]
<5>[90364.765601] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90364.765619] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90364.765651] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90364.765694] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90364.765957] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90364.765990] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:27.543101817 UTC
<6>[90364.766167] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90364.766290] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90364.766318] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90364.766341] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90364.766487] (0)[576:logd.auditd]type=1400 audit(1671082647.536:1622956):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90364.767586] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90364.769156] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90364.769185] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90364.794336] (elapsed 0.027 seconds) done.
<6>[90364.794373] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90364.794392] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90364.850850] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90364.850901] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90364.850968] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90364.852378] (1)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90364.852981] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90364.853094] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90364.853130] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90364.853933] (1)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90364.854398] (1)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90364.855526] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90364.855555] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90364.855583] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90364.856334] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217378499000000 to 2022/12/15 05:37:32 (now = 2022/12/15 05:37:27)
<5>[90364.856453] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:33 (1)
<5>[90364.859869] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90364.860352] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90364.860387] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90364.860397] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90364.860496] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90364.860535] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90364.860581] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90364.860581]
<6>[90364.860603] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90364.860603]
<6>[90364.860625] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90364.860625]
<6>[90364.860646] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90364.860646]
<6>[90364.860758] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90364.860798] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90364.860823] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90364.861427] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90364.861508] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90364.861733] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90364.862075] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90364.862097] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90364.862582] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90364.862604] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90364.863043] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90364.863379] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,792 us
<6>[90364.864268] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90364.864551] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90364.864673] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90364.865070] (2)[10823:Binder:636_2]suspend of devices complete after 56.192
msecs
<6>[90364.870716] (2)[10823:Binder:636_2]late suspend of devices complete after
5.617 msecs
<4>[90364.870744] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90364.875723]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90364.876349] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90364.876729] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90364.877525] (2)[10823:Binder:636_2]noirq suspend of devices complete after
6.108 msecs
<6>[90364.877596] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90364.877596] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90364.877596] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90364.877673] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90364.877673] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90364.877673] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90364.877673] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90364.877673] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90364.877673] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 52077, r13 = 0xc40019ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x800, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b67e7ff, req_sta =
0x1c000ff 0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0xf82229e3, wlk_cntcv_h = 0x291,
26M_off_pct = 61
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 1.589 seconds
<4>[90364.877673] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90364.877673] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90364.877673] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90364.877673] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90364.877673] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90364.877673] -(2)[0:swapper/2]Call trace:
<4>[90364.877673] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90364.877673] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90364.877673] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90364.877673] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90364.877673] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90364.877673] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90364.877673] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90364.877673] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90364.877673] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90364.877673] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90364.877673] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90364.877673] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90364.877673] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90364.877673] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90364.877673] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90364.877673] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90364.877673] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90364.877673] -(2)[0:swapper/2]---[ end trace 308173880bd0bf64 ]---
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 33770 (32k)
<4>[90364.877673] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 1.030/2.000/2.000/1.163/2.2000 seconds
<6>[90364.877673] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90364.877784] -(2)[0:swapper/2][SCP] ipi id/type/action/event/reserve =
3/77/6/4/0
<6>[90364.877826] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90364.877866] -(2)[0:swapper/2]i2c no need switch top pll
<6>[90364.879977] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_resume
<5>[90364.881052]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90364.881076] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90364.883218] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90364.888689] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.141 msecs
<6>[90364.889327] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
<4>[90364.889351] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90364.894425] (2)[10823:Binder:636_2]early resume of devices complete after
5.014 msecs
<5>[90364.894861] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90364.896827] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90364.897129] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90364.897169] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1628 us
<5>[90364.897439] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90364.898001] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90364.898029] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90364.898112] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90364.898144] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90364.898395] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90364.898598] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90364.898653] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90364.898677] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90364.898762] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90364.898804] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90364.898927] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90364.898953] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90364.898967] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90364.899111] (2)[10823:Binder:636_2]zcvf, no update time:12 96 avgc:0
avgc_thread
<5>[90364.899139] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90364.901651] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90364.902866] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90364.902961] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90364.903287] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90364.903322] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90364.903937] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90364.904081] (2)[30082:kworker/2:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90364.906911] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90364.907992] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90364.908146] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90364.908370] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90364.908885] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90364.911867] (1)[10823:Binder:636_2]resume of devices complete after 17.409
msecs
<3>[90364.917920] (1)[7388:kworker/1:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90364.917945] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90364.918719] (1)[7388:kworker/1:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90364.918740] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90364.918948] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90364.918966] (4)[1315:receiver]Restarting tasks ...
<6>[90364.926148] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90364.926240] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90364.926410] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90364.927069] -(7)[1893:AlarmManager]alarmtimer_enqueue, 217378499000000
<12>[90364.933769] (2)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<12>[90364.933851] (2)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<4>[90364.940823] done.
<5>[90364.940861] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90364.940945] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90364.946372] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<12>[90364.947215] (1)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<6>[90364.953847] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174687,6293,10851scp1 sleep state: 54603,23330,23330
<6>[90364.953880] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90364.953880]
<5>[90364.953894] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90364.953905] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90364.953927] -(1)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90364.953940] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90364.954968] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90364.955356] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90364.955604] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90364.955645] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:29.325548200 UTC
<6>[90364.955846] (1)[7388:kworker/1:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:3><0x1cdc>
<6>[90364.955961] (1)[7388:kworker/1:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90364.955974] (1)[7388:kworker/1:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90364.956005] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90364.956024] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90364.956042] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90364.956257] (0)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90364.956374] (0)[576:logd.auditd]type=1400 audit(1671082649.323:1622957):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<12>[90364.962384] (3)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<12>[90364.962464] (3)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<12>[90364.971751] (0)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<12>[90364.978608] (0)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<12>[90364.978674] (0)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=99 fc=4110000 cc=670 chg=
<12>[90364.987118] (0)[853:[email protected]]healthd: battery l=59 v=3929 t=33.6 h=2
st=3 c=69 fc=4110000 cc=670 chg=
<3>[90364.993468] (1)[25366:kworker/1:4]typec_cc_orientation = 2
<12>[90364.993945] (6)[853:[email protected]]healthd: battery l=59 v=3935 t=33.6 h=2
st=3 c=69 fc=4110000 cc=670 chg=
<6>[90365.065039] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90365.065088] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90365.065138] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90365.102773] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90365.151186] (1)[25366:kworker/1:4]chg_type = 0, hvdcp_type = 0
<3>[90365.203388] (1)[25366:kworker/1:4]get_connector_temp: connector_temp:322
<6>[90365.203838] (1)[25366:kworker/1:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90365.204232] (1)[25366:kworker/1:4]mt_charger_plugin plugin:0
<6>[90365.254510] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90365.443614] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90365.506552] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90365.506594] (3)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90365.506715] (3)[23437:kworker/u16:3]PM: ++
<7>[90365.515533] (3)[23437:kworker/u16:3]PM: --
<6>[90365.534255] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 52077, r13 = 0xc40019ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x800, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b67e7ff, req_sta =
0x1c000ff 0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe,
<6>[90365.534302] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<4>[90365.618378] done.
<6>[90365.624287] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174703,6305,10874scp1 sleep state: 54605,23330,23330
<6>[90365.624321] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90365.624321]
<6>[90365.624346] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90365.624346]
<6>[90365.624369] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90365.624369]
<6>[90365.624392] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90365.624392]
<5>[90365.624414] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90365.624433] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90365.624472] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90365.624503] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90365.624826] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90365.624861] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:29.994778123 UTC
<6>[90365.625058] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90365.625116] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90365.625145] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90365.625168] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90365.625397] (2)[576:logd.auditd]type=1400 audit(1671082649.991:1622958):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90365.627405] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90365.628247] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90365.628278] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90365.655227] (elapsed 0.030 seconds) done.
<6>[90365.655262] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90365.655282] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90365.716722] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90365.716770] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90365.716837] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90365.718396] (3)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90365.718743] (3)[23437:kworker/u16:3]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90365.718846] (0)[7405:kworker/u16:10]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90365.719169] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90365.719281] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90365.719315] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90365.720113] (3)[23443:kworker/u16:5][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90365.720768] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90365.720838] (0)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90365.720848] (3)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90365.721595] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90365.721618] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90365.721645] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90365.722380] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217378499000000 to 2022/12/15 05:37:32 (now = 2022/12/15 05:37:29)
<5>[90365.722500] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:33 (1)
<5>[90365.725895] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90365.726479] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90365.726517] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90365.726528] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90365.726629] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90365.726669] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90365.726712] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90365.726712]
<6>[90365.726735] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90365.726735]
<6>[90365.726756] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90365.726756]
<6>[90365.726778] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90365.726778]
<6>[90365.726884] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90365.726921] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90365.726944] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90365.727525] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90365.727604] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90365.727823] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90365.728147] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90365.728168] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90365.728556] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90365.728575] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90365.728972] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90365.729289] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,728 us
<6>[90365.730027] (0)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000f
<6>[90365.730344] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90365.730460] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90365.730833] (0)[10823:Binder:636_2]suspend of devices complete after 58.586
msecs
<6>[90365.736243] (0)[10823:Binder:636_2]late suspend of devices complete after
5.381 msecs
<4>[90365.736270] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90365.741259]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90365.741990] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90365.742403] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90365.743104] (0)[10823:Binder:636_2]noirq suspend of devices complete after
6.059 msecs
<6>[90365.743187] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90365.743187] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90365.743187] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90365.743269] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90365.743269] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90365.743269] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 103451, r13 = 0xc400f9bc, debug_flag = 0xf80618ff
0x4001e66e, connectivity not sleep, modem not sleep, subsys sleep r12 = 0x40,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6747ff, req_sta = 0x3c3d0ff
0x0 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xfb40ce68, wlk_cntcv_h = 0x291, 26M_off_pct =
66
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 3.157 seconds
<4>[90365.743269] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90365.743269] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90365.743269] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90365.743269] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90365.743269] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90365.743269] -(0)[0:swapper/0]Call trace:
<4>[90365.743269] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90365.743269] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90365.743269] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90365.743269] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90365.743269] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90365.743269] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90365.743269] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90365.743269] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90365.743269] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90365.743269] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90365.743269] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90365.743269] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90365.743269] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90365.743269] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90365.743269] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90365.743269] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90365.743269] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90365.743269] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90365.743269] -(0)[0:swapper/0]---[ end trace 308173880bd0bf65 ]---
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 72035 (32k)
<4>[90365.743269] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 2.198/3.122/3.122/2.527/3.3122 seconds
<6>[90365.743269] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90365.743269] -(0)[0:swapper/0]EINT 222 is pending
<6>[90365.743396] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90365.743439] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90365.743412] -(0)[0:swapper/0]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90365.745449] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_resume
<5>[90365.746926]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90365.746954] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90365.748899] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90365.754422] (0)[10823:Binder:636_2]noirq resume of devices complete after
10.123 msecs
<6>[90365.754662] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90365.754775] -(1)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90365.754882] -(1)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90365.754925] (1)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90365.755087] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90365.755113] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90365.760186] (0)[10823:Binder:636_2]early resume of devices complete after
5.018 msecs
<5>[90365.760633] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90365.762554] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90365.762883] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90365.762919] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1505 us
<5>[90365.763193] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90365.763809] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90365.763835] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90365.763909] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90365.763941] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90365.764023] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90365.764213] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90365.764269] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90365.764291] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90365.764374] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90365.764415] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90365.764535] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90365.764559] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90365.764572] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90365.764714] (0)[10823:Binder:636_2]zcvf, no update time:16 96 avgc:0
avgc_thread
<5>[90365.764741] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90365.768100] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90365.769209] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90365.769301] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90365.769591] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90365.769626] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90365.770341] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90365.770492] (3)[30078:kworker/3:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90365.772515] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90365.772885] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90365.773167] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90365.774849] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<3>[90365.774876] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90365.777073] (2)[10823:Binder:636_2]resume of devices complete after 16.854
msecs
<3>[90365.781533] (2)[26031:kworker/2:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90365.781557] (2)[26031:kworker/2:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90365.782133] (0)[10823:Binder:636_2]OOM killer enabled.
<3>[90365.782257] (2)[26031:kworker/2:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90365.782269] (2)[26031:kworker/2:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90365.782294] (1)[1315:receiver]Restarting tasks ...
<6>[90365.789957] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90365.790466] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90365.790482] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90365.802609] done.
<5>[90365.802642] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90365.802660] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90365.807487] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10174784,6338,10934scp1 sleep state: 54607,23330,23330
<6>[90365.807516] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90365.807516]
<5>[90365.807528] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90365.807536] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90365.807553] -(0)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90365.807563] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90365.808620] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90365.808962] -(0)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90365.809033] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90365.809486] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90365.809523] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:33.339983276 UTC
<6>[90365.809678] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90365.809757] (0)[30807:kworker/0:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90365.809768] (0)[30807:kworker/0:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90365.809797] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<36>[90365.809805] (2)[576:logd.auditd]type=1400 audit(1671082653.333:1622959):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90365.809829] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90365.809844] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90365.810096] -(1)[1893:AlarmManager]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<5>[90365.813047] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<3>[90365.826150] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<3>[90365.860820] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90365.911024] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90365.911066] (0)[10823:Binder:636_2]active wakeup source: usb
<3>[90365.966683] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<6>[90366.018912] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90366.070321] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:322
<6>[90366.070383] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90366.070449] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<6>[90366.129726] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90366.350749] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90366.350838] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90366.350893] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90366.350935] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90366.452343] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90366.803867] -(3)[0:swapper/3]lvts_paused = 1
<6>[90366.814672] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90366.891874] -(2)[0:swapper/2][bq27z561] fg_update_status:
SOC:59,Volt:3938,Cur:91,Temp:336,RM:2244,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90366.920040] -(2)[0:swapper/2]lvts_paused = 1
<6>[90367.187900] -(0)[7445:Dns_158_10182][ccci1/dpmaif]tx0_resume_tx: 0x40000,
0x40000, 0x0
<6>[90367.188013] -(0)[0:swapper/0][ccci1/dpmaif]clear txq0_resume_done: 0x40000,
0x40000, 0x0
<6>[90367.243955] -(0)[7443:Measurement Net][ccci1/dpmaif]tx1_resume_tx: 0x40000,
0x40000, 0x0
<6>[90367.244036] -(0)[7443:Measurement Net][ccci1/dpmaif]clear txq1_resume_done:
0x40000, 0x40000, 0x0
<5>[90367.300130] -(3)[0:swapper/3]lvts_paused = 1
<5>[90367.300211] -(3)[0:swapper/3]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90367.410258] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90367.410509] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90367.460473] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90367.615976] -(0)[5444:Binder:1454_19]alarmtimer_enqueue, 217482850000000
<5>[90367.621258] -(2)[1867:Binder:1454_3]alarmtimer_enqueue, 217482850000000
<5>[90367.786233] (2)[26031:kworker/2:5]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<5>[90367.786322] (2)[30082:kworker/2:1]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<3>[90367.786369] (2)[26031:kworker/2:5]ghr: scsi_execute exit ret = 0x0
<3>[90367.786392] (2)[30082:kworker/2:1]ghr: scsi_execute exit ret = 0x0
<6>[90367.838669] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<5>[90367.898573] -(2)[1867:Binder:1454_3]alarmtimer_enqueue, 217482850000000
<5>[90367.903816] -(0)[1867:Binder:1454_3]alarmtimer_enqueue, 217482850000000
<6>[90368.094698] (2)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90368.095379] -(1)[2251:kworker/u17:4][ccci1/fsm]received MD status response
975e0043
<6>[90368.095614] (2)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<4>[90368.254397] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 666,
658, 689, 575, 206, 132, 107, 67, success counter cpu: 132, 129, 167, 105, 35, 11,
7, 2, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 222, 218,
250, 175, 61, 20, 15, 4, o: 0-1,3-7, p: , f: 2, t: 90368395601846, 90368383960089,
90368380000000, 90368390979228, 90368699677845, 90368508000000, 90368382515634,
90368508000000,
<5>[90368.351250] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90368.351330] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90368.351382] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90368.351424] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90368.351610] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90368.470445] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90368.494532] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x2,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368494510342,15000000]
<6>[90368.494575] (1)[432:wdtk-1][thread:432][RT:90368494558572] 2022-12-15
05:37:36.25036 UTC;android time 2022-12-15 12:37:36.25036
<6>[90368.516730] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x3,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368516700803,14977810]
<5>[90368.545025] -(2)[0:swapper/2]lvts_paused = 1
<5>[90368.545103] -(2)[0:swapper/2]Cnt= 10 LVTS TC 3, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<5>[90368.545147] -(2)[0:swapper/2]Cnt= 20 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90368.559368] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x7,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368559339573,14935171]
<6>[90368.565104] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0xf,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368565076419,14929434]
<6>[90368.574546] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x2f,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368574532188,14919978]
<6>[90368.574691] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x3f,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368574678573,14919832]
<6>[90368.574713] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xbf,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368574705726,14919805]
<6>[90368.574793] (6)[437:wdtk-6][wdk-k]
cpu=6,lbit=0xff,cbit=0xff,7,1,2667932697,90365624847721,90365809501720,
[90368574780188,14919730]
<6>[90368.602390] (1)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90368.603144] (6)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90368.862387] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<5>[90369.119115] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<5>[90369.229541] -(2)[0:swapper/2]lvts_paused = 1
<3>[90369.246804] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90369.341941] -(2)[5449:Binder:1454_1C]alarmtimer_enqueue, 217388047000000
<6>[90369.344676] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90369.375749] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:27%
<6>[90369.375852] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90369.375874] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90369.375884] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90369.375897] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90369.375906] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90369.375918] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33178,33542501,5450), tx=(12946,1994,10952), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90369.375994] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90369.445663] (4)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90369.445689] (6)[6931:kworker/u16:8]PM: Syncing filesystems ...
<7>[90369.446004] (6)[6931:kworker/u16:8]PM: ++
<7>[90369.453352] (6)[6931:kworker/u16:8]PM: --
<6>[90369.479034] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90369.550977] done.
<6>[90369.556180] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175015,6552,11171scp1 sleep state: 54609,23330,23330
<6>[90369.556223] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90369.556223]
<6>[90369.556248] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90369.556248]
<6>[90369.556270] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90369.556270]
<6>[90369.556292] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90369.556292]
<5>[90369.556313] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90369.556330] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90369.556361] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90369.556389] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90369.556695] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90369.556729] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:37.087198661 UTC
<6>[90369.556902] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90369.556959] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90369.556986] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90369.557008] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90369.557119] (2)[576:logd.auditd]type=1400 audit(1671082657.081:1622960):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90369.558199] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90369.559716] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90369.559745] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90369.582714] (elapsed 0.025 seconds) done.
<6>[90369.582743] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90369.582755] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.008 seconds) done.
<3>[90369.642104] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90369.642137] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90369.642246] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90369.643130] (1)[23436:kworker/u16:0]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90369.643666] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90369.643742] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90369.643765] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90369.644376] (1)[23436:kworker/u16:0][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90369.645168] (1)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<6>[90369.645361] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90369.645378] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90369.645396] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90369.645934] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217388047000000 to 2022/12/15 05:37:41 (now = 2022/12/15 05:37:36)
<5>[90369.646072] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:37:42 (1)
<5>[90369.648406] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90369.648735] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90369.648758] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90369.648765] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90369.648837] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90369.648862] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90369.648891] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90369.648891]
<6>[90369.648904] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90369.648904]
<6>[90369.648916] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90369.648916]
<6>[90369.648928] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90369.648928]
<6>[90369.649002] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90369.649028] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90369.649041] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90369.649448] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90369.649497] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90369.649630] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90369.649874] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90369.649887] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90369.650219] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90369.650231] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90369.650528] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90369.650773] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,552 us
<6>[90369.651336] (3)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000f
<6>[90369.651520] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90369.651601] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90369.651865] (3)[10823:Binder:636_2]suspend of devices complete after 57.766
msecs
<6>[90369.655356] (3)[10823:Binder:636_2]late suspend of devices complete after
3.472 msecs
<4>[90369.655373] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90369.658326]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90369.659025] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90369.659245] (1)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90369.659681] (3)[10823:Binder:636_2]noirq suspend of devices complete after
3.822 msecs
<6>[90369.659734] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90369.659734] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90369.659734] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90369.659788] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90369.659788] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90369.659788] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90369.659788] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90369.659788] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90369.659788] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 166535, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x23a8b34, wlk_cntcv_h = 0x292, 26M_off_pct = 20
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 5.082 seconds
<4>[90369.659788] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90369.659788] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90369.659788] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90369.659788] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90369.659788] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90369.659788] -(3)[0:swapper/3]Call trace:
<4>[90369.659788] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90369.659788] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90369.659788] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90369.659788] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90369.659788] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90369.659788] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90369.659788] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90369.659788] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90369.659788] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90369.659788] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90369.659788] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90369.659788] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90369.659788] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90369.659788] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90369.659788] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90369.659788] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90369.659788] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90369.659788] -(3)[0:swapper/3]---[ end trace 308173880bd0bf66 ]---
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 27845 (32k)
<4>[90369.659788] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.849/4.831/4.986/0.917/5.5032 seconds
<6>[90369.659788] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90369.659788] -(3)[0:swapper/3]EINT 222 is pending
<6>[90369.659917] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x2c0000, 0x0)
<6>[90369.659982] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90369.659914] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90369.661966] (1)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90369.662987]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90369.663003] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90369.664875] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90369.669892] (1)[10823:Binder:636_2]noirq resume of devices complete after
9.307 msecs
<6>[90369.670106] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90369.670202] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90369.670299] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90369.670374] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90369.670474] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90369.670492] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90369.674771] (1)[10823:Binder:636_2]early resume of devices complete after
4.229 msecs
<5>[90369.675209] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90369.676934] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90369.677169] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90369.677195] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1348 us
<5>[90369.677373] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90369.677833] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90369.677851] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90369.677908] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90369.677927] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90369.677991] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90369.678124] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90369.678212] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90369.678227] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90369.678282] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90369.678308] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90369.678382] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90369.678397] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90369.678406] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90369.678498] (1)[10823:Binder:636_2]zcvf, no update time:25 96 avgc:0
avgc_thread
<5>[90369.678517] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90369.680538] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90369.681300] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90369.681368] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90369.681612] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90369.681633] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90369.682064] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90369.682217] (1)[7388:kworker/1:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90369.683136] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90369.683347] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90369.683564] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90369.684070] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90369.684434] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90369.688386] (2)[10823:Binder:636_2]resume of devices complete after 13.594
msecs
<3>[90369.693428] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90369.693450] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90369.694002] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90369.694020] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90369.694319] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90369.694340] (1)[1315:receiver]Restarting tasks ...
<6>[90369.701043] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90369.701188] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90369.701263] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90369.713361] done.
<5>[90369.713399] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90369.713416] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90369.722562] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175137,6615,11259scp1 sleep state: 54611,23330,23330
<6>[90369.722602] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90369.722602]
<5>[90369.722617] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90369.722629] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90369.722650] -(0)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90369.722663] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90369.723686] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90369.723955] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90369.724029] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90369.724473] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90369.724523] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:42.340492814 UTC
<6>[90369.724831] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90369.724927] (0)[30807:kworker/0:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90369.724941] (0)[30807:kworker/0:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90369.724976] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90369.724995] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90369.725014] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90369.726325] (1)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90369.726708] (1)[576:logd.auditd]type=1400 audit(1671082662.335:1622961):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90369.741810] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<3>[90369.742093] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<3>[90369.770434] (1)[7390:kworker/1:5]typec_cc_orientation = 2
<6>[90369.826541] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90369.826578] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90369.877818] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<4>[90369.886533] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90369.886575] -(4)[7032:kworker/4:0]active wake lock : main,last_time:90369809
<4>[90369.886586] -(4)[7032:kworker/4:0]active wake lock : usb,last_time:90369809
<3>[90369.928552] (1)[7390:kworker/1:5]chg_type = 0, hvdcp_type = 0
<3>[90369.980712] (1)[7390:kworker/1:5]get_connector_temp: connector_temp:322
<6>[90369.980785] (1)[7390:kworker/1:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90369.980857] (1)[7390:kworker/1:5]mt_charger_plugin plugin:0
<12>[90369.989976] (0)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90369.990061] (0)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90369.995113] (0)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<6>[90370.031451] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<12>[90370.146241] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90370.146289] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90370.151862] (2)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<5>[90370.351650] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90370.351739] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90370.351792] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90370.351834] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90370.484141] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90370.654548] -(2)[0:swapper/2][ccci1/dpmaif]tx1_resume_tx: 0x1c0000, 0x2c0000,
0x0
<6>[90370.654935] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 166535, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90370.655057] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90370.656877] -(3)[861:netd][ccci1/dpmaif]clear txq1_resume_done: 0x1c0000,
0x40000, 0x0
<6>[90370.750437] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90370.784983] -(3)[0:swapper/3][bq27z561] fg_update_status:
SOC:59,Volt:3938,Cur:51,Temp:336,RM:2243,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90370.797574] -(3)[0:swapper/3]lvts_paused = 1
<5>[90370.797668] -(3)[0:swapper/3]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<5>[90371.107517] -(3)[0:swapper/3]lvts_paused = 1
<5>[90371.107603] -(3)[0:swapper/3]Cnt= 10 LVTS TC 1, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90371.492335] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90371.701897] (2)[30082:kworker/2:1]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<5>[90371.702426] (2)[26031:kworker/2:5]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<3>[90371.704328] (2)[30082:kworker/2:1]ghr: scsi_execute exit ret = 0x0
<3>[90371.704398] (2)[26031:kworker/2:5]ghr: scsi_execute exit ret = 0x0
<6>[90371.774575] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<5>[90372.352103] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90372.352287] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90372.352345] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90372.352389] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90372.500681] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90372.702498] (6)[0:swapper/6][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90372.799471] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<3>[90373.172498] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<4>[90373.256842] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 625,
647, 646, 538, 215, 106, 100, 48, success counter cpu: 72, 124, 111, 119, 45, 7,
11, 5, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 155, 239,
198, 249, 79, 24, 19, 7, o: 1,4-7, p: , f: 2, t: 90373384000000, 90373383954320,
90373382521557, 90373384000000, 90373468000000, 90373468000000, 90373596000000,
90373564000000,
<5>[90373.288007] -(1)[5444:Binder:1454_19]alarmtimer_enqueue, 217482850000000
<5>[90373.330046] -(0)[4944:Binder:1454_13]alarmtimer_enqueue, 217482850000000
<5>[90373.332969] -(0)[5444:Binder:1454_19]alarmtimer_enqueue, 217482850000000
<5>[90373.333365] -(0)[5444:Binder:1454_19]alarmtimer_enqueue, 217482850000000
<6>[90373.337123] (4)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90373.337154] (5)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90373.337267] (5)[23437:kworker/u16:3]PM: ++
<7>[90373.343555] (5)[23437:kworker/u16:3]PM: --
<5>[90373.378046] -(1)[0:swapper/1]lvts_paused = 1
<5>[90373.378135] -(1)[0:swapper/1]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<4>[90373.443378] done.
<6>[90373.451749] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175391,6835,11497scp1 sleep state: 54613,23330,23330
<6>[90373.451801] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90373.451801]
<6>[90373.451826] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90373.451826]
<6>[90373.451848] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90373.451848]
<6>[90373.451870] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90373.451870]
<5>[90373.451891] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90373.451909] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90373.451946] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90373.451975] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90373.452279] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90373.452312] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:46.068301506 UTC
<6>[90373.452511] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90373.452569] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90373.452596] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90373.452620] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90373.452819] (1)[576:logd.auditd]type=1400 audit(1671082666.063:1622962):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90373.453861] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90373.455494] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90373.455522] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90373.482799] (elapsed 0.030 seconds) done.
<6>[90373.482834] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90373.482853] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90373.542881] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90373.542930] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90373.542999] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90373.544414] (1)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90373.545122] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90373.545238] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90373.545275] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90373.546259] (1)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90373.546632] (1)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90373.547551] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90373.547581] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90373.547610] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90373.548338] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217431688428908 to 2022/12/15 05:38:25 (now = 2022/12/15 05:37:45)
<5>[90373.548456] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:38:26 (1)
<5>[90373.551700] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90373.552105] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90373.552141] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90373.552151] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90373.552264] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90373.552315] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90373.552367] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90373.552367]
<6>[90373.552390] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90373.552390]
<6>[90373.552413] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90373.552413]
<6>[90373.552435] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90373.552435]
<6>[90373.552558] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90373.552600] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90373.552625] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90373.553324] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90373.553413] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90373.553653] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90373.554039] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90373.554062] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90373.554604] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90373.554625] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90373.555098] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90373.555445] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,838 us
<6>[90373.556327] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90373.556633] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90373.556764] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90373.557199] (3)[10823:Binder:636_2]suspend of devices complete after 57.121
msecs
<6>[90373.562955] (3)[10823:Binder:636_2]late suspend of devices complete after
5.725 msecs
<4>[90373.562984] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90373.568012]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90373.568667] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90373.569017] (1)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90373.569696] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.796 msecs
<6>[90373.569779] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90373.569779] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90373.569779] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90373.569861] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90373.569861] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90373.569861] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 378052, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xe335f70, wlk_cntcv_h = 0x292, 26M_off_pct = 74
<6>[90373.569861] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 11.537 seconds
<4>[90373.569861] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90373.569861] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90373.569861] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90373.569861] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90373.569861] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90373.569861] -(3)[0:swapper/3]Call trace:
<4>[90373.569861] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90373.569861] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90373.569861] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90373.569861] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90373.569861] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90373.569861] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90373.569861] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90373.569861] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90373.569861] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90373.569861] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90373.569861] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90373.569861] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90373.569861] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90373.569861] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90373.569861] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90373.569861] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90373.569861] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90373.569861] -(3)[0:swapper/3]---[ end trace 308173880bd0bf67 ]---
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 278778 (32k)
<4>[90373.569861] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 8.507/11.221/11.221/8.957/11.1221 seconds
<6>[90373.569861] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90373.569988] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x40000, 0x0)
<6>[90373.570031] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90373.569995] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90373.571761] (1)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_resume
<5>[90373.572680]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90373.572708] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90373.574805] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90373.580411] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.477 msecs
<6>[90373.580708] (3)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(71)
<6>[90373.581089] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90373.581112] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90373.586051] (3)[10823:Binder:636_2]early resume of devices complete after
4.890 msecs
<5>[90373.586531] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90373.588350] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90373.588670] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90373.588707] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1394 us
<5>[90373.588978] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90373.589594] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90373.589621] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90373.589697] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90373.589730] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90373.589811] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90373.590000] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90373.590055] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90373.590078] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90373.590234] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90373.590278] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90373.590398] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90373.590422] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90373.590436] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90373.590575] (3)[10823:Binder:636_2]zcvf, no update time:41 96 avgc:0
avgc_thread
<5>[90373.590601] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90373.592727] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90373.593785] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90373.593874] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90373.594353] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90373.594388] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90373.595066] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90373.595205] (3)[2356:kworker/3:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90373.597222] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90373.597812] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90373.599211] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90373.599238] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90373.599324] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90373.602881] (0)[10823:Binder:636_2]resume of devices complete after 16.796
msecs
<3>[90373.607984] (0)[3064:kworker/0:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90373.608013] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90373.608743] (0)[3064:kworker/0:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90373.608768] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90373.609009] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90373.609031] (7)[1315:receiver]Restarting tasks ...
<6>[90373.615783] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90373.615875] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90373.615967] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90373.616481] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<6>[90373.620152] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<12>[90373.621670] (2)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90373.621735] (2)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<4>[90373.629015] done.
<5>[90373.629041] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90373.629059] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90373.631876] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90373.634349] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175655,6963,11643scp1 sleep state: 54615,23330,23330
<6>[90373.634373] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90373.634373]
<5>[90373.634542] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90373.634555] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90373.634574] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90373.634586] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90373.635116] -(2)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90373.636216] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90373.637549] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90373.637585] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:57.794271659 UTC
<36>[90373.637765] (1)[576:logd.auditd]type=1400 audit(1671082677.790:1622963):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90373.637904] (0)[3064:kworker/0:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:0><0xbf8>
<6>[90373.638111] (0)[3064:kworker/0:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90373.638124] (0)[3064:kworker/0:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90373.638171] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90373.638320] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90373.638346] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90373.641010] (0)[10823:Binder:636_2]PM: suspend exit
<12>[90373.642617] (0)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90373.650088] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<6>[90373.683932] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90373.730694] -(2)[0:swapper/2][ccci1/dpmaif]tx1_resume_tx: 0x1c0000, 0x40000,
0x0
<6>[90373.730769] -(2)[0:swapper/2][ccci1/dpmaif]wake up by MD0 HIF L2(10800/0)
(3e0/0)!
<6>[90373.733000] -(0)[328:irq/46-5-0034][ccci1/dpmaif]wake up by MD0 HIF L2(42/0)
(3e0/0)!
<6>[90373.733042] -(0)[328:irq/46-5-0034][ccci1/dpmaif]clear txq1_resume_done:
0x1c0000, 0x40000, 0x0
<6>[90373.733781] (2)[1319:dpmaif_txq1_don][ccci1/dpmaif]DPMA_MD wakeup source:
(1/2)
<6>[90373.742652] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90373.742679] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90373.742716] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90373.742731] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90373.792603] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90373.897619] (3)[23446:kworker/3:1]typec_cc_orientation = 2
<3>[90373.996791] (3)[23446:kworker/3:1]chg_type = 0, hvdcp_type = 0
<3>[90374.047985] (3)[23446:kworker/3:1]get_connector_temp: connector_temp:322
<6>[90374.048034] (3)[23446:kworker/3:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90374.048073] (3)[23446:kworker/3:1]mt_charger_plugin plugin:0
<6>[90374.207151] (5)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90374.207179] (6)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90374.207502] (6)[19178:kworker/u16:2]PM: ++
<7>[90374.214395] (5)[19178:kworker/u16:2]PM: --
<5>[90374.239996] -(3)[0:swapper/3]lvts_paused = 1
<5>[90374.240074] -(3)[0:swapper/3]Cnt= 10 LVTS TC 5, LVTSMSRCTL1[10,7,0] = 1,0,0,
LVTSMSRCTL1[10:0] = 0x4
<4>[90374.315364] done.
<6>[90374.323910] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175672,6971,11660scp1 sleep state: 54617,23332,23332
<6>[90374.323960] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90374.323960]
<6>[90374.323984] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90374.323984]
<6>[90374.324006] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90374.324006]
<6>[90374.324028] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90374.324028]
<5>[90374.324050] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90374.324068] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90374.324103] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90374.324145] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90374.324443] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90374.324476] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:58.481172198 UTC
<6>[90374.324664] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90374.324720] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90374.324748] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90374.324772] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90374.324921] (3)[576:logd.auditd]type=1400 audit(1671082678.478:1622964):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90374.326058] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90374.327851] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90374.327880] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90374.354802] (elapsed 0.030 seconds) done.
<6>[90374.354839] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90374.354860] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90374.413524] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90374.413581] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90374.413659] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90374.415297] (0)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90374.415693] (0)[19178:kworker/u16:2]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90374.416001] (2)[23444:kworker/u16:7]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90374.416027] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90374.416479] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90374.416517] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90374.417523] (0)[23443:kworker/u16:5][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90374.418531] (0)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90374.418568] (2)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90374.418626] (0)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<6>[90374.419543] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90374.419573] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90374.419604] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90374.420463] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217431688428908 to 2022/12/15 05:38:25 (now = 2022/12/15 05:37:58)
<5>[90374.420582] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:38:26 (1)
<5>[90374.424140] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90374.424596] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90374.424637] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90374.424648] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90374.424763] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90374.424804] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90374.424857] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90374.424857]
<6>[90374.424880] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90374.424880]
<6>[90374.424902] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90374.424902]
<6>[90374.424924] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90374.424924]
<6>[90374.425049] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90374.425091] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90374.425116] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90374.425791] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90374.425880] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90374.426121] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90374.426570] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90374.426594] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90374.427061] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90374.427080] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90374.427541] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90374.427923] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,857 us
<6>[90374.428952] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90374.429249] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90374.429385] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90374.429824] (1)[10823:Binder:636_2]suspend of devices complete after 57.539
msecs
<6>[90374.437136] (1)[10823:Binder:636_2]late suspend of devices complete after
7.281 msecs
<4>[90374.437165] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90374.443310]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90374.443938] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90374.444321] (1)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90374.445116] (1)[10823:Binder:636_2]noirq suspend of devices complete after
7.048 msecs
<6>[90374.445186] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90374.445186] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90374.445186] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90374.445263] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90374.445263] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90374.445263] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90374.445263] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90374.445263] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90374.445263] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 20415, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6563f9, req_sta = 0x1c000ff 0x180000
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xf5d4fef, wlk_cntcv_h = 0x292, 26M_off_pct = 12
<6>[90374.445263] -(1)[0:swapper/1][ccci1/WK]CCIF RX bitmap:0x10
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 0.623 seconds
<4>[90374.445263] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90374.445263] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90374.445263] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90374.445263] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90374.445263] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90374.445263] -(1)[0:swapper/1]Call trace:
<4>[90374.445263] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90374.445263] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90374.445263] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90374.445263] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90374.445263] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90374.445263] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90374.445263] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90374.445263] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90374.445263] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90374.445263] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90374.445263] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90374.445263] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90374.445263] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90374.445263] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90374.445263] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90374.445263] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90374.445263] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90374.445263] -(1)[0:swapper/1]---[ end trace 308173880bd0bf68 ]---
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90374.445263] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/0.000/0.000/0.000/0.000 seconds
<6>[90374.445263] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90374.445389] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x40000, 0x0)
<6>[90374.445433] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90374.445398] -(1)[0:swapper/1]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90374.447625] (1)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90374.448683]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90374.448707] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90374.450868] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90374.456398] (1)[10823:Binder:636_2]noirq resume of devices complete after
9.921 msecs
<6>[90374.456710] (2)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(72)
<6>[90374.456900] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90374.456923] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90374.462266] (1)[10823:Binder:636_2]early resume of devices complete after
5.292 msecs
<5>[90374.462695] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90374.464791] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90374.465105] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90374.465142] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1479 us
<5>[90374.465410] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90374.466335] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90374.466365] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90374.466441] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90374.466473] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90374.466556] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90374.466741] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90374.466795] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90374.466818] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90374.466899] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90374.466939] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90374.467059] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90374.467084] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90374.467096] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90374.467238] (2)[10823:Binder:636_2]zcvf, no update time:42 96 avgc:0
avgc_thread
<5>[90374.467265] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90374.470465] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90374.471536] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90374.471628] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90374.471914] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90374.471948] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90374.472597] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90374.472741] (2)[7306:kworker/2:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90374.475060] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90374.475620] (2)[7305:kworker/2:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90374.476703] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90374.476801] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<3>[90374.476914] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90374.479307] (0)[10823:Binder:636_2]resume of devices complete after 17.007
msecs
<6>[90374.482404] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90374.482427] (0)[30807:kworker/0:5]Restarting tasks ...
<3>[90374.483146] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90374.483181] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90374.483876] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90374.483897] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<5>[90374.486940] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90374.487106] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90374.487181] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90374.487231] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90374.487274] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90374.488938] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90374.489686] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90374.489775] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90374.501768] done.
<5>[90374.501800] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90374.501813] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90374.506299] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90374.509925] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175698,6983,11698scp1 sleep state: 54619,23332,23332
<6>[90374.509963] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90374.509963]
<5>[90374.509979] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90374.509991] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90374.510010] -(3)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90374.510024] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90374.510422] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90374.514271] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90374.514939] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90374.514979] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:37:59.298235966 UTC
<6>[90374.515155] (0)[3064:kworker/0:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:0><0xbf8>
<6>[90374.515231] (0)[3064:kworker/0:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90374.515244] (0)[3064:kworker/0:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90374.515276] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90374.515298] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90374.515326] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90374.515343] (0)[10823:Binder:636_2]PM: suspend exit
<36>[90374.516814] (1)[576:logd.auditd]type=1400 audit(1671082679.296:1622965):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90374.560557] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90374.616537] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90374.616584] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90374.616633] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90374.639974] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90374.672775] (2)[26031:kworker/2:5]typec_cc_orientation = 2
<6>[90374.721699] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90374.824139] (2)[26031:kworker/2:5]chg_type = 0, hvdcp_type = 0
<3>[90374.926333] (2)[26031:kworker/2:5]get_connector_temp: connector_temp:322
<6>[90374.926405] (2)[26031:kworker/2:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90374.926473] (2)[26031:kworker/2:5]mt_charger_plugin plugin:0
<6>[90375.071915] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90375.071960] (3)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90375.072218] (3)[7608:kworker/u16:11]PM: ++
<6>[90375.074279] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90375.074478] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<7>[90375.079983] (3)[7608:kworker/u16:11]PM: --
<4>[90375.178442] done.
<6>[90375.185249] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175716,6994,11720scp1 sleep state: 54621,23332,23332
<6>[90375.185301] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90375.185301]
<6>[90375.185326] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90375.185326]
<6>[90375.185349] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90375.185349]
<6>[90375.185370] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90375.185370]
<5>[90375.185392] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90375.185410] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90375.185447] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90375.185476] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90375.185784] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90375.185816] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:37:59.969086350 UTC
<6>[90375.186016] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90375.186072] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90375.186099] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90375.186327] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90375.186397] (2)[576:logd.auditd]type=1400 audit(1671082679.964:1622966):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90375.188035] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90375.189205] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90375.189233] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90375.213873] (elapsed 0.027 seconds) done.
<6>[90375.213908] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90375.213928] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
<6>[90375.220180] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
<3>[90375.220227] (0)[10823:Binder:636_2]Freezing of tasks aborted after 0.006
seconds
<6>[90375.220248] (0)[10823:Binder:636_2]Restarting kernel threads ... done.
<6>[90375.224591] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90375.224607] (1)[1316:vdec_log_info]Restarting tasks ...
<6>[90375.230738] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90375.230909] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90375.231257] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<4>[90375.232237] -(3)[1893:AlarmManager]alarmtimer_enqueue: 1 callbacks suppressed
<5>[90375.232253] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<4>[90375.246690] done.
<5>[90375.246726] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90375.246747] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90375.250747] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90375.251465] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175719,6995,11732scp1 sleep state: 54623,23335,23335
<6>[90375.251490] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90375.251490]
<5>[90375.251506] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90375.251520] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90375.251540] -(3)[10823:Binder:636_2]Abort: Pending Wakeup Sources: [timerfd]
<5>[90375.251554] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90375.252592] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90375.253469] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90375.253507] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:38:00.036767350 UTC
<6>[90375.253690] (3)[23446:kworker/3:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:1><0x5b96>
<36>[90375.253751] (2)[576:logd.auditd]type=1400 audit(1671082680.032:1622967):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90375.253786] (3)[23446:kworker/3:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90375.253801] (3)[23446:kworker/3:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90375.253818] (3)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90375.253838] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90375.253867] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90375.253884] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90375.455422] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90375.455462] (3)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90375.455580] (3)[7608:kworker/u16:11]PM: ++
<7>[90375.465077] (3)[7608:kworker/u16:11]PM: --
<4>[90375.562469] done.
<6>[90375.568968] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10175727,7000,11746scp1 sleep state: 54625,23335,23335
<6>[90375.569000] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90375.569000]
<6>[90375.569024] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90375.569024]
<6>[90375.569047] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90375.569047]
<6>[90375.569069] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90375.569069]
<5>[90375.569090] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90375.569108] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90375.569138] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90375.569167] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90375.569445] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90375.569477] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:38:00.352747581 UTC
<6>[90375.569663] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90375.569721] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90375.569748] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90375.569770] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90375.569907] (2)[576:logd.auditd]type=1400 audit(1671082680.348:1622968):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90375.571208] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90375.577700] (0)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3932,Cur:139,Temp:336,RM:2243,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90375.597226] (elapsed 0.027 seconds) done.
<6>[90375.597274] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90375.597291] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90375.656805] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:322
<3>[90375.656861] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90375.656938] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90375.658627] (2)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90375.658703] (3)[7608:kworker/u16:11]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90375.658894] (0)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90375.659442] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90375.659569] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90375.659605] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90375.660476] (0)[23443:kworker/u16:5][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90375.661021] (0)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90375.661064] (4)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90375.661075] (1)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<6>[90375.661975] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90375.662002] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90375.662030] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90375.662837] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217431688428908 to 2022/12/15 05:38:26 (now = 2022/12/15 05:38:00)
<5>[90375.662963] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:38:27 (1)
<5>[90375.666566] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90375.666997] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90375.667035] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90375.667045] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90375.667149] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90375.667192] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90375.667235] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90375.667235]
<6>[90375.667258] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90375.667258]
<6>[90375.667280] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90375.667280]
<6>[90375.667302] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90375.667302]
<6>[90375.667424] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90375.667465] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90375.667489] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90375.668099] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90375.668181] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90375.668405] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90375.668752] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90375.668773] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90375.669182] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90375.669201] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90375.669627] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90375.669959] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,771 us
<6>[90375.670821] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90375.671110] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90375.671232] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90375.671647] (3)[10823:Binder:636_2]suspend of devices complete after 57.161
msecs
<6>[90375.676912] (3)[10823:Binder:636_2]late suspend of devices complete after
5.236 msecs
<4>[90375.676938] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90375.681580]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90375.682301] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90375.682652] (2)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90375.683332] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.742 msecs
<6>[90375.683414] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90375.683414] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90375.683414] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90375.683495] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90375.683495] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90375.683495] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 878372, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767fb, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x2518f26c, wlk_cntcv_h = 0x292, 26M_off_pct =
78
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 26.805 seconds
<4>[90375.683495] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90375.683495] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90375.683495] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90375.683495] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90375.683495] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90375.683495] -(3)[0:swapper/3]Call trace:
<4>[90375.683495] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90375.683495] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90375.683495] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90375.683495] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90375.683495] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90375.683495] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90375.683495] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90375.683495] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90375.683495] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90375.683495] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90375.683495] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90375.683495] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90375.683495] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90375.683495] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90375.683495] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90375.683495] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90375.683495] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90375.683495] -(3)[0:swapper/3]---[ end trace 308173880bd0bf69 ]---
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 649730 (32k)
<4>[90375.683495] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 19.828/25.786/25.786/21.571/25.5786 seconds
<6>[90375.683495] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90375.683495] -(3)[0:swapper/3]EINT 222 is pending
<6>[90375.683641] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x40000, 0x0)
<6>[90375.683685] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90375.683654] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90375.685601] (2)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90375.686675]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90375.686701] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90375.688698] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90375.694644] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.950 msecs
<6>[90375.694898] (2)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90375.695039] -(2)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90375.695125] -(2)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90375.695171] (2)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90375.695184] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd]
<4>[90375.695200] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90375.700614] (3)[10823:Binder:636_2]early resume of devices complete after
5.353 msecs
<5>[90375.701051] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90375.703041] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90375.703367] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90375.703407] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1666 us
<5>[90375.703682] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90375.704051] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90375.704077] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90375.704157] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90375.704189] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90375.704275] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90375.704470] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90375.704534] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90375.704557] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90375.704641] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90375.704683] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90375.704801] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90375.704826] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90375.704840] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90375.704984] (3)[10823:Binder:636_2]zcvf, no update time:70 96 avgc:0
avgc_thread
<5>[90375.705012] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90375.707940] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90375.709130] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90375.709225] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90375.709541] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90375.709576] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90375.710406] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90375.710484] (3)[7406:kworker/3:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90375.712463] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90375.712738] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90375.713682] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90375.714928] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90375.715188] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90375.718886] (0)[10823:Binder:636_2]resume of devices complete after 18.237
msecs
<3>[90375.725006] (0)[3064:kworker/0:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90375.725033] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<6>[90375.725146] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90375.725171] (0)[3064:kworker/0:0]Restarting tasks ...
<3>[90375.725966] (0)[3064:kworker/0:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90375.725999] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<5>[90375.729702] -(1)[853:[email protected]]alarmtimer_enqueue, 218031688428908
<6>[90375.732213] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90375.732301] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90375.732472] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90375.733097] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<6>[90375.739233] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90375.747767] done.
<5>[90375.747803] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90375.747823] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90375.753937] (2)[853:[email protected]]healthd: battery l=59 v=3939 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<12>[90375.754014] (2)[853:[email protected]]healthd: battery l=59 v=3939 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<5>[90375.754291] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90375.759302] (4)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176309,7314,12084scp1 sleep state: 54627,23335,23335
<6>[90375.759333] (4)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90375.759333]
<5>[90375.759351] (4)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90375.759365] (4)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90375.759385] -(4)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90375.759399] (4)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<12>[90375.760111] (2)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<5>[90375.760369] (4)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90375.761004] -(6)[407:EEMG_CTRL_GPU_H][Thermal/TZ/CPU]Driver is ready to
report valid temperatures
<5>[90375.761047] (4)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90375.761082] (4)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:38:27.353790736 UTC
<6>[90375.761243] (4)[7032:kworker/4:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/4:0><0x1b78>
<6>[90375.761327] (4)[7032:kworker/4:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90375.761337] (4)[7032:kworker/4:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90375.761365] (4)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90375.761378] (4)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<36>[90375.761409] (1)[576:logd.auditd]type=1400 audit(1671082707.348:1622969):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90375.761580] (4)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90375.763186] (4)[10823:Binder:636_2]PM: suspend exit
<12>[90375.769813] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<12>[90375.769864] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<12>[90375.773487] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<12>[90375.777878] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<12>[90375.777924] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<6>[90375.778227] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 878372, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767fb, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90375.778305] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<12>[90375.787419] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<12>[90375.791484] (4)[853:[email protected]]healthd: battery l=59 v=3938 t=33.6 h=2
st=3 c=18 fc=4110000 cc=670 chg=
<3>[90375.800821] (3)[7406:kworker/3:2]typec_cc_orientation = 2
<6>[90375.864891] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90375.864938] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90375.864987] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90375.909442] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90375.958517] (3)[7406:kworker/3:2]chg_type = 0, hvdcp_type = 0
<3>[90376.010640] (3)[7406:kworker/3:2]get_connector_temp: connector_temp:323
<6>[90376.010879] (3)[7406:kworker/3:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90376.011537] (3)[7406:kworker/3:2]mt_charger_plugin plugin:0
<6>[90376.061941] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90376.322002] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90376.322052] (2)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90376.322303] (2)[7405:kworker/u16:10]PM: ++
<7>[90376.331759] (0)[7405:kworker/u16:10]PM: --
<4>[90376.430281] done.
<6>[90376.437934] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176322,7319,12094scp1 sleep state: 54629,23337,23337
<6>[90376.437985] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90376.437985]
<6>[90376.438010] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90376.438010]
<6>[90376.438033] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90376.438033]
<6>[90376.438055] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90376.438055]
<5>[90376.438078] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90376.438182] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90376.438221] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90376.438251] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90376.438540] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90376.438576] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:38:28.031294043 UTC
<6>[90376.438780] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90376.438840] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90376.438867] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90376.438890] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90376.439136] (1)[576:logd.auditd]type=1400 audit(1671082708.028:1622970):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90376.440248] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90376.441923] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90376.441950] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90376.469157] (elapsed 0.030 seconds) done.
<6>[90376.469200] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90376.469221] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90376.528682] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90376.528735] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90376.528808] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90376.530226] (0)[7405:kworker/u16:10]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90376.530783] (1)[23437:kworker/u16:3]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90376.530890] (0)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90376.531193] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90376.531308] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90376.531338] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90376.532182] (1)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90376.532408] (1)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90376.532464] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90376.532474] (2)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<6>[90376.533829] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90376.533852] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90376.533880] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90376.534803] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217482850000000 to 2022/12/15 05:39:16 (now = 2022/12/15 05:38:27)
<5>[90376.534942] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:17 (1)
<5>[90376.537983] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90376.538539] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90376.538576] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90376.538586] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90376.538694] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90376.538734] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90376.538776] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90376.538776]
<6>[90376.538795] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90376.538795]
<6>[90376.538814] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90376.538814]
<6>[90376.538833] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90376.538833]
<6>[90376.538947] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90376.538987] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90376.539008] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90376.539635] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90376.539712] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90376.539920] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90376.540259] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90376.540280] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90376.540698] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90376.540713] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90376.541131] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90376.541444] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,742 us
<6>[90376.542407] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90376.542674] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90376.542796] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90376.543170] (0)[10823:Binder:636_2]suspend of devices complete after 56.630
msecs
<6>[90376.549364] (0)[10823:Binder:636_2]late suspend of devices complete after
6.165 msecs
<4>[90376.549390] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90376.554954]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90376.555599] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90376.555940] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90376.556643] (0)[10823:Binder:636_2]noirq suspend of devices complete after
6.472 msecs
<6>[90376.556708] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90376.556708] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90376.556708] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90376.556785] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90376.556785] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90376.556785] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 288473, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x2c9930fb, wlk_cntcv_h = 0x292, 26M_off_pct =
91
<6>[90376.556785] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x10
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 8.803 seconds
<4>[90376.556785] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90376.556785] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90376.556785] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90376.556785] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90376.556785] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90376.556785] -(0)[0:swapper/0]Call trace:
<4>[90376.556785] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90376.556785] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90376.556785] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90376.556785] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90376.556785] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90376.556785] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90376.556785] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90376.556785] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90376.556785] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90376.556785] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90376.556785] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90376.556785] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90376.556785] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90376.556785] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90376.556785] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90376.556785] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90376.556785] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90376.556785] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90376.556785] -(0)[0:swapper/0]---[ end trace 308173880bd0bf6a ]---
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 285789 (32k)
<4>[90376.556785] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 8.721/9.143/9.143/8.826/9.9143 seconds
<6>[90376.556785] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90376.556907] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x40000, 0x0)
<6>[90376.556947] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90376.556909] -(0)[0:swapper/0]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90376.558878] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90376.559847]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90376.559868] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90376.561902] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90376.567247] (0)[10823:Binder:636_2]noirq resume of devices complete after
9.464 msecs
<6>[90376.567524] (3)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(73)
<6>[90376.567694] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90376.567714] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90376.572711] (0)[10823:Binder:636_2]early resume of devices complete after
4.949 msecs
<5>[90376.573134] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90376.575125] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90376.575397] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90376.575429] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1679 us
<5>[90376.575658] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90376.575960] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90376.575981] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90376.576047] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90376.576074] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90376.576146] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90376.576310] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90376.576360] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90376.576379] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90376.576451] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90376.576486] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90376.577308] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90376.577333] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90376.577345] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90376.577471] (0)[10823:Binder:636_2]zcvf, no update time:80 96 avgc:0
avgc_thread
<5>[90376.577495] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90376.580300] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90376.581210] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90376.581290] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90376.581549] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90376.581578] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90376.582248] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90376.582396] (0)[25356:kworker/0:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90376.584094] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90376.584439] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90376.584710] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90376.585154] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90376.585655] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90376.588541] (1)[10823:Binder:636_2]resume of devices complete after 15.800
msecs
<3>[90376.592979] (1)[7388:kworker/1:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90376.593003] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90376.593647] (1)[7388:kworker/1:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90376.593668] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90376.593861] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90376.593879] (2)[1038:mi_thermald]Restarting tasks ...
<5>[90376.599286] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90376.599360] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90376.599400] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90376.599432] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90376.600713] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90376.600862] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90376.601016] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90376.601425] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<4>[90376.613976] done.
<5>[90376.614008] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90376.614024] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90376.618227] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90376.618485] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176510,7421,12220scp1 sleep state: 54631,23337,23337
<6>[90376.618505] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90376.618505]
<5>[90376.618521] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90376.618533] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90376.618553] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90376.618568] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90376.619248] -(0)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90376.619682] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90376.620773] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90376.620813] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:38:37.020351581 UTC
<6>[90376.621019] (1)[7388:kworker/1:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:3><0x1cdc>
<6>[90376.621116] (1)[7388:kworker/1:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90376.621130] (1)[7388:kworker/1:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90376.621142] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0200c0e] wf
<6>[90376.621186] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90376.621215] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90376.621234] (1)[10823:Binder:636_2]PM: suspend exit
<36>[90376.622944] (1)[576:logd.auditd]type=1400 audit(1671082717.016:1622971):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<3>[90376.669742] (0)[30822:kworker/0:7]typec_cc_orientation = 2
<6>[90376.722728] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90376.722775] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90376.722824] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90376.753655] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90376.778972] (0)[30822:kworker/0:7]chg_type = 0, hvdcp_type = 0
<6>[90376.798519] -(2)[0:swapper/2][ccci1/dpmaif]tx1_resume_tx: 0x1c0000, 0x40000,
0x0
<6>[90376.798615] -(1)[0:swapper/1][ccci1/dpmaif]wake up by MD0 HIF L2(10800/0)
(3e0/0)!
<6>[90376.800906] -(2)[328:irq/46-5-0034][ccci1/dpmaif]wake up by MD0 HIF L2(42/0)
(3e0/0)!
<6>[90376.800946] -(2)[328:irq/46-5-0034][ccci1/dpmaif]clear txq1_resume_done:
0x1c0000, 0x40000, 0x0
<6>[90376.801688] (0)[1319:dpmaif_txq1_don][ccci1/dpmaif]DPMA_MD wakeup source:
(1/2)
<3>[90376.834312] (0)[30822:kworker/0:7]get_connector_temp: connector_temp:323
<6>[90376.834575] (0)[30822:kworker/0:7][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90376.834858] (0)[30822:kworker/0:7]mt_charger_plugin plugin:0
<6>[90376.881526] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90376.960048] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90377.054401] (0)[296:hang_detect][Hang_Detect] hang_detect thread counts down
10:10, status 1.
<6>[90377.215563] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90377.215607] (0)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90377.215726] (0)[23443:kworker/u16:5]PM: ++
<7>[90377.224913] (0)[23443:kworker/u16:5]PM: --
<4>[90377.323334] done.
<6>[90377.338411] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176525,7426,12231scp1 sleep state: 54633,23337,23337
<6>[90377.338462] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90377.338462]
<6>[90377.338487] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90377.338487]
<6>[90377.338511] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90377.338511]
<6>[90377.338533] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90377.338533]
<5>[90377.338555] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90377.338573] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90377.338608] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90377.338637] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90377.338937] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90377.338970] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:38:37.738518735 UTC
<6>[90377.339160] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90377.339218] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90377.339244] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90377.339267] (2)[613:teei_daemon]Freezing user space processes ...
<5>[90377.340490] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90377.342242] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90377.342271] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90377.367418] (elapsed 0.028 seconds) done.
<6>[90377.367453] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90377.367472] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<3>[90377.424851] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90377.424895] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90377.424955] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90377.426255] (1)[25368:kworker/u16:9]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90377.426887] (2)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90377.427008] (1)[19178:kworker/u16:2]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90377.427390] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90377.427494] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90377.427531] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90377.428333] (1)[25368:kworker/u16:9][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90377.428403] (1)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90377.428531] (2)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90377.428560] (1)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<6>[90377.429791] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90377.429815] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90377.429843] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90377.430605] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217482850000000 to 2022/12/15 05:39:16 (now = 2022/12/15 05:38:37)
<5>[90377.430725] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:17 (1)
<5>[90377.434226] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90377.434669] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90377.434708] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90377.434719] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90377.434830] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90377.434873] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90377.434920] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90377.434920]
<6>[90377.434942] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90377.434942]
<6>[90377.434964] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90377.434964]
<6>[90377.434986] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90377.434986]
<6>[90377.435098] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90377.435138] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90377.435162] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90377.435766] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90377.435846] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90377.436063] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90377.436385] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90377.436405] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90377.436799] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90377.436817] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90377.437257] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90377.437600] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,796 us
<6>[90377.438477] (2)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000f
<6>[90377.438739] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90377.438857] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90377.439234] (2)[10823:Binder:636_2]suspend of devices complete after 57.475
msecs
<6>[90377.445849] (2)[10823:Binder:636_2]late suspend of devices complete after
6.586 msecs
<4>[90377.445876] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90377.451595]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90377.452235] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90377.452614] (2)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90377.453426] (2)[10823:Binder:636_2]noirq suspend of devices complete after
6.846 msecs
<6>[90377.453498] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90377.453498] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90377.453498] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90377.453578] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90377.453578] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90377.453578] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90377.453578] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90377.453578] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90377.453578] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 73583, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x2f09326b, wlk_cntcv_h = 0x292, 26M_off_pct =
24
<6>[90377.453578] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x10
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 2.245 seconds
<4>[90377.453578] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90377.453578] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90377.453578] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90377.453578] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90377.453578] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90377.453578] -(2)[0:swapper/2]Call trace:
<4>[90377.453578] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90377.453578] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90377.453578] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90377.453578] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90377.453578] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90377.453578] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90377.453578] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90377.453578] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90377.453578] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90377.453578] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90377.453578] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90377.453578] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90377.453578] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90377.453578] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90377.453578] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90377.453578] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90377.453578] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90377.453578] -(2)[0:swapper/2]---[ end trace 308173880bd0bf6b ]---
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 17841 (32k)
<4>[90377.453578] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.544/2.074/2.073/0.544/2.2072 seconds
<6>[90377.453578] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90377.453702] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x40000, 0x0)
<6>[90377.453745] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90377.453713] -(2)[0:swapper/2]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90377.455658] (2)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90377.457105]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90377.457133] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90377.459350] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90377.464786] (3)[10823:Binder:636_2]noirq resume of devices complete after
10.137 msecs
<6>[90377.465100] (1)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(74)
<6>[90377.465366] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90377.465394] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90377.470528] (3)[10823:Binder:636_2]early resume of devices complete after
5.080 msecs
<5>[90377.470946] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90377.472823] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90377.473139] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90377.473176] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1459 us
<5>[90377.473444] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90377.474131] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90377.474159] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90377.474236] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90377.474268] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90377.474351] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90377.474539] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90377.474602] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90377.474625] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90377.474709] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90377.474749] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90377.474873] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90377.474898] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90377.474911] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90377.475053] (3)[10823:Binder:636_2]zcvf, no update time:83 96 avgc:0
avgc_thread
<5>[90377.475080] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90377.478145] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90377.479144] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90377.479243] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90377.479536] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90377.479570] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90377.480218] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90377.480376] (3)[25513:kworker/3:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90377.482859] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90377.483387] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90377.484496] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90377.484598] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90377.484692] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90377.487804] (1)[10823:Binder:636_2]resume of devices complete after 17.242
msecs
<3>[90377.493082] (1)[25366:kworker/1:4]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90377.493106] (1)[25366:kworker/1:4][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90377.493742] (1)[25366:kworker/1:4]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90377.493762] (1)[25366:kworker/1:4][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90377.493959] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90377.493977] (4)[1315:receiver]Restarting tasks ...
<6>[90377.501839] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90377.502026] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90377.502519] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90377.502689] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<4>[90377.515304] done.
<5>[90377.515368] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90377.515387] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90377.521066] (2)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90377.533457] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176582,7455,12286scp1 sleep state: 54635,23337,23337
<6>[90377.533490] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90377.533490]
<5>[90377.533503] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90377.533514] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90377.533531] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90377.533542] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90377.534353] -(0)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90377.534629] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90377.535277] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90377.535314] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:38:40.183973504 UTC
<6>[90377.535484] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<6>[90377.535554] (1)[25366:kworker/1:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90377.535565] (1)[25366:kworker/1:4]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90377.535593] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90377.535608] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90377.535624] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90377.535979] (1)[7388:kworker/1:3]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<3>[90377.568365] (1)[7388:kworker/1:3]typec_cc_orientation = 2
<6>[90377.636800] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90377.636840] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90377.636882] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<3>[90377.679032] (1)[7388:kworker/1:3]chg_type = 0, hvdcp_type = 0
<6>[90377.729441] (1)[7390:kworker/1:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90377.761915] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90377.780545] (1)[7388:kworker/1:3]get_connector_temp: connector_temp:323
<6>[90377.780783] (1)[7388:kworker/1:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90377.781026] (1)[7388:kworker/1:3]mt_charger_plugin plugin:0
<6>[90377.831606] (1)[7390:kworker/1:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90378.079456] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90378.079501] (0)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90378.079760] (0)[23444:kworker/u16:7]PM: ++
<7>[90378.086755] (0)[23444:kworker/u16:7]PM: --
<4>[90378.186417] done.
<5>[90378.193753] -(1)[0:swapper/1]lvts_paused = 1
<6>[90378.195081] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176599,7468,12309scp1 sleep state: 54637,23337,23337
<6>[90378.195111] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90378.195111]
<6>[90378.195135] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90378.195135]
<6>[90378.195158] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90378.195158]
<6>[90378.195180] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90378.195180]
<5>[90378.195201] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90378.195219] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90378.195254] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90378.195298] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90378.195598] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90378.195631] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:38:40.844301735 UTC
<6>[90378.195814] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90378.195872] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90378.195899] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90378.195923] (0)[613:teei_daemon]Freezing user space processes ...
<5>[90378.197156] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90378.199005] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90378.199033] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90378.224001] (elapsed 0.028 seconds) done.
<6>[90378.224035] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90378.224055] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<4>[90378.257589] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 693,
677, 715, 736, 331, 213, 164, 80, success counter cpu: 134, 139, 83, 114, 57, 37,
20, 1, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 197, 219,
133, 191, 93, 44, 37, 1, o: 0,2-7, p: , f: , t: 90378396000000, 90378383956089,
9223372036854775807, 90378420657154, 90378426987153, 90378556000000,
90378972000000, 90378524000000,
<3>[90378.281267] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90378.281312] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90378.281375] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90378.282640] (3)[25368:kworker/u16:9]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90378.283155] (1)[7608:kworker/u16:11]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90378.283313] (1)[19178:kworker/u16:2]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90378.283560] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90378.283666] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90378.283699] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90378.284759] (3)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90378.284860] (1)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<3>[90378.284980] (1)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90378.284998] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90378.286234] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90378.286266] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90378.286291] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90378.286984] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217482850000000 to 2022/12/15 05:39:16 (now = 2022/12/15 05:38:40)
<5>[90378.287093] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:17 (1)
<5>[90378.288986] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90378.289354] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90378.289387] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90378.289397] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90378.289493] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90378.289530] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90378.289572] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90378.289572]
<6>[90378.289590] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90378.289590]
<6>[90378.289609] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90378.289609]
<6>[90378.289627] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90378.289627]
<6>[90378.289737] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90378.289773] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90378.289793] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90378.290469] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90378.290542] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90378.290734] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90378.291041] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90378.291060] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90378.291429] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90378.291444] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90378.291853] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90378.292151] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,716 us
<6>[90378.292906] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90378.293155] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90378.293269] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90378.293632] (3)[10823:Binder:636_2]suspend of devices complete after 54.447
msecs
<6>[90378.298530] (3)[10823:Binder:636_2]late suspend of devices complete after
4.873 msecs
<4>[90378.298554] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90378.302806]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90378.303457] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90378.303763] (2)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90378.304390] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.081 msecs
<6>[90378.304462] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90378.304462] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90378.304462] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90378.304533] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90378.304533] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90378.304533] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90378.304533] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90378.304533] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90378.304533] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 41173, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6543f9, req_sta = 0x1c000ff 0x0
0x50000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x30abee23, wlk_cntcv_h = 0x292, 26M_off_pct = 2
<6>[90378.304533] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 1.256 seconds
<4>[90378.304533] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90378.304533] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90378.304533] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90378.304533] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90378.304533] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90378.304533] -(3)[0:swapper/3]Call trace:
<4>[90378.304533] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90378.304533] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90378.304533] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90378.304533] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90378.304533] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90378.304533] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90378.304533] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90378.304533] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90378.304533] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90378.304533] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90378.304533] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90378.304533] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90378.304533] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90378.304533] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90378.304533] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90378.304533] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90378.304533] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90378.304533] -(3)[0:swapper/3]---[ end trace 308173880bd0bf6c ]---
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 644 (32k)
<4>[90378.304533] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.019/1.000/0.987/0.045/0.997 seconds
<6>[90378.304533] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90378.304654] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x40000, 0x0)
<6>[90378.304708] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90378.304656] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90378.306434] (2)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_resume
<5>[90378.307350]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90378.307373] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90378.309331] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90378.314748] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.316 msecs
<6>[90378.315005] (1)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(75)
<6>[90378.315199] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90378.315220] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90378.319563] (3)[10823:Binder:636_2]early resume of devices complete after
4.297 msecs
<5>[90378.319944] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90378.321768] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90378.322120] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90378.322154] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1608 us
<5>[90378.322384] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90378.322684] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90378.322705] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90378.322771] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90378.322799] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90378.322868] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90378.323033] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90378.323083] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90378.323101] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90378.323173] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90378.323209] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90378.323638] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90378.323662] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90378.323675] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90378.323799] (3)[10823:Binder:636_2]zcvf, no update time:85 96 avgc:0
avgc_thread
<5>[90378.323822] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90378.326929] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90378.327857] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90378.327938] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90378.328205] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90378.328234] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90378.328849] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90378.328991] (3)[2356:kworker/3:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90378.330728] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90378.331013] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90378.331336] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90378.331918] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90378.332501] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90378.335347] (1)[10823:Binder:636_2]resume of devices complete after 15.755
msecs
<3>[90378.339738] (1)[7390:kworker/1:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90378.339764] (1)[7390:kworker/1:5][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90378.340385] (1)[7390:kworker/1:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90378.340406] (1)[7390:kworker/1:5][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90378.340615] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90378.340634] (0)[1315:receiver]Restarting tasks ...
<6>[90378.348138] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90378.348208] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90378.348419] (7)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90378.360847] done.
<5>[90378.360872] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90378.360882] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90378.364017] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90378.365494] (5)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176634,7485,12343scp1 sleep state: 54639,23337,23337
<6>[90378.365519] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90378.365519]
<5>[90378.365532] (5)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90378.365541] (5)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90378.365556] -(5)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90378.365566] (5)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90378.366476] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90378.366686] (5)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90378.367453] (5)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90378.367481] (5)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:38:42.275948503 UTC
<6>[90378.367652] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90378.367714] (5)[27096:kworker/5:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90378.367770] (5)[27096:kworker/5:3]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90378.367797] (5)[27096:kworker/5:3]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90378.367837] (5)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90378.367850] (5)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90378.367864] (5)[10823:Binder:636_2]PM: suspend exit
<3>[90378.416473] (3)[30078:kworker/3:3]typec_cc_orientation = 2
<6>[90378.469004] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90378.469048] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90378.469090] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<3>[90378.526338] (3)[30078:kworker/3:3]chg_type = 0, hvdcp_type = 0
<6>[90378.578321] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90378.599655] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90378.599744] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90378.599798] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90378.599840] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<3>[90378.629196] (3)[30078:kworker/3:3]get_connector_temp: connector_temp:323
<6>[90378.629459] (3)[30078:kworker/3:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90378.629935] (3)[30078:kworker/3:3]mt_charger_plugin plugin:0
<6>[90378.679222] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90378.769922] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90378.942425] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90378.942552] (2)[23436:kworker/u16:0]PM: Syncing filesystems ...
<7>[90378.942738] (2)[23436:kworker/u16:0]PM: ++
<7>[90378.952572] (2)[23436:kworker/u16:0]PM: --
<4>[90379.051310] done.
<6>[90379.061123] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176651,7498,12362scp1 sleep state: 54641,23339,23339
<6>[90379.061176] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90379.061176]
<6>[90379.061200] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90379.061200]
<6>[90379.061223] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90379.061223]
<6>[90379.061244] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90379.061244]
<5>[90379.061266] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90379.061284] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90379.061320] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90379.061366] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90379.061689] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90379.061722] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:38:42.970192888 UTC
<6>[90379.061926] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90379.061983] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90379.062010] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90379.062034] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90379.062299] (3)[576:logd.auditd]type=1400 audit(1671082722.965:1622976):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90379.063824] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90379.064866] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90379.064894] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90379.090006] (elapsed 0.027 seconds) done.
<6>[90379.090042] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90379.090130] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90379.146226] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90379.146269] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90379.146332] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90379.147592] (0)[23436:kworker/u16:0]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90379.147735] (1)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90379.147900] (2)[23437:kworker/u16:3]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90379.148149] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90379.148254] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90379.148286] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90379.149037] (2)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90379.149836] (2)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90379.149856] (0)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90379.149867] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90379.150392] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90379.150415] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90379.150440] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90379.151111] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217482850000000 to 2022/12/15 05:39:16 (now = 2022/12/15 05:38:42)
<5>[90379.151221] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:17 (1)
<5>[90379.154486] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90379.154886] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90379.154920] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90379.154929] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90379.155025] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90379.155061] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90379.155099] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90379.155099]
<6>[90379.155118] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90379.155118]
<6>[90379.155136] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90379.155136]
<6>[90379.155154] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90379.155154]
<6>[90379.155253] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90379.155290] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90379.155311] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90379.155860] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90379.155933] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90379.156125] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90379.156438] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90379.156456] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90379.156839] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90379.156855] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90379.157254] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90379.157560] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,715 us
<6>[90379.158326] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90379.158567] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90379.158683] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90379.159040] (3)[10823:Binder:636_2]suspend of devices complete after 54.157
msecs
<6>[90379.163884] (3)[10823:Binder:636_2]late suspend of devices complete after
4.818 msecs
<4>[90379.163907] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90379.168064]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90379.168702] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90379.169002] (2)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90379.169594] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.056 msecs
<6>[90379.169666] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90379.169666] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90379.169666] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90379.169737] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90379.169737] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90379.169737] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90379.169737] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90379.169737] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90379.169737] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 386946, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767f9, req_sta = 0x1c000ff 0x0
0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x3a7e9fb0, wlk_cntcv_h = 0x292, 26M_off_pct =
57
<6>[90379.169737] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 11.808 seconds
<4>[90379.169737] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90379.169737] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90379.169737] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90379.169737] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90379.169737] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90379.169737] -(3)[0:swapper/3]Call trace:
<4>[90379.169737] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90379.169737] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90379.169737] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90379.169737] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90379.169737] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90379.169737] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90379.169737] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90379.169737] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90379.169737] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90379.169737] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90379.169737] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90379.169737] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90379.169737] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90379.169737] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90379.169737] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90379.169737] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90379.169737] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90379.169737] -(3)[0:swapper/3]---[ end trace 308173880bd0bf6d ]---
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 216483 (32k)
<4>[90379.169737] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 6.606/11.829/11.842/7.310/11.1842 seconds
<6>[90379.169737] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90379.169859] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0x40000, 0x0)
<6>[90379.169911] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90379.169860] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90379.171442] (2)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90379.172031]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90379.172054] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90379.173960] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90379.179346] (3)[10823:Binder:636_2]noirq resume of devices complete after
8.713 msecs
<6>[90379.179613] (1)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(76)
<6>[90379.179846] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90379.179866] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90379.184169] (3)[10823:Binder:636_2]early resume of devices complete after
4.257 msecs
<5>[90379.184542] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90379.186342] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90379.186625] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90379.186658] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1509 us
<5>[90379.186891] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90379.187195] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90379.187217] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90379.187283] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90379.187310] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90379.187381] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90379.187542] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90379.187589] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90379.187608] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90379.187677] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90379.187713] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90379.187816] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90379.187837] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90379.187848] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90379.187979] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90379.190833] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90379.191752] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90379.191834] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90379.192097] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90379.192126] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90379.192723] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90379.192793] (3)[23446:kworker/3:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90379.194599] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90379.194948] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90379.195174] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90379.196174] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90379.196450] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90379.199141] (0)[10823:Binder:636_2]resume of devices complete after 14.944
msecs
<6>[90379.202761] -(2)[0:swapper/2][ccci1/dpmaif]wake up by MD0 HIF L2(0/1)(3e0/0)!
<6>[90379.202802] (2)[0:swapper/2][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<3>[90379.203063] (0)[25356:kworker/0:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90379.203087] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90379.203651] (0)[25356:kworker/0:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90379.203670] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90379.204361] -(0)[1274:dpmaif_rx_push][ccci1/dpmaif]tx0_resume_tx: 0x1c0000,
0x40000, 0x0
<6>[90379.204448] -(3)[0:swapper/3][ccci1/dpmaif]clear txq0_resume_done: 0x40000,
0x40000, 0x0
<6>[90379.204649] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90379.204665] (5)[1315:receiver]Restarting tasks ...
<6>[90379.211934] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90379.212243] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90379.212310] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90379.212777] -(3)[1893:AlarmManager]alarmtimer_enqueue: 1 callbacks suppressed
<5>[90379.212789] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<4>[90379.223109] done.
<5>[90379.223130] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90379.223140] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90379.228036] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90379.231874] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176927,7637,12527scp1 sleep state: 54643,23339,23339
<6>[90379.231898] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90379.231898]
<5>[90379.231913] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90379.231924] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90379.231942] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90379.231954] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90379.232948] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90379.233455] -(2)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90379.233628] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90379.233667] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:38:54.954077426 UTC
<6>[90379.233829] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<36>[90379.233841] (3)[576:logd.auditd]type=1400 audit(1671082734.950:1622977):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90379.233916] (0)[25356:kworker/0:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90379.233928] (0)[25356:kworker/0:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90379.233961] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90379.233978] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90379.234847] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90379.236005] (0)[10823:Binder:636_2]PM: suspend exit
<3>[90379.280025] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90379.337116] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90379.337155] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90379.337234] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90379.337253] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90379.337272] (0)[10823:Binder:636_2]active wakeup source: ccmni_md1
<5>[90379.358756] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<3>[90379.389358] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<6>[90379.443931] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90379.542525] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90379.596711] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:323
<6>[90379.597142] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90379.597612] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<6>[90379.614369] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:23%
<6>[90379.614436] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90379.614457] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90379.614467] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90379.614481] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90379.614489] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90379.614502] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33180,33542727,5450), tx=(12951,1996,10955), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90379.614577] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<5>[90379.659986] -(0)[0:swapper/0]lvts_paused = 1
<6>[90379.774870] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90380.222388] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90380.222430] (1)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90380.222670] (1)[7383:kworker/u16:6]PM: ++
<7>[90380.230874] (1)[7383:kworker/u16:6]PM: --
<6>[90380.254227] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90380.307280] (3)[25513:kworker/3:4][bq27z561] fg_update_status:
SOC:59,Volt:3936,Cur:212,Temp:337,RM:2242,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90380.307448] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90380.308423] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90380.308904] (1)[118:pd_dbg_info]///PD dbg info 128d
<5>[90380.308930] (1)[118:pd_dbg_info]<90380.308>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90380.308930] <90380.308>TCPC-TCPC:bat_update_work_func Battery Discharging
<5>[90380.312582] -(3)[1867:Binder:1454_3]alarmtimer_enqueue, 217482850000000
<6>[90380.320069] (3)[7406:kworker/3:2]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<4>[90380.330257] done.
<6>[90380.334820] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176950,7650,12549scp1 sleep state: 54645,23339,23339
<6>[90380.334853] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90380.334853]
<6>[90380.334877] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90380.334877]
<6>[90380.334901] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90380.334901]
<6>[90380.334923] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90380.334923]
<5>[90380.334944] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90380.334961] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90380.334994] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90380.335022] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90380.335261] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90380.335294] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:38:56.055716503 UTC
<36>[90380.335611] (3)[576:logd.auditd]type=1400 audit(1671082736.054:1622978):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90380.335674] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90380.335713] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90380.335728] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90380.335742] (1)[613:teei_daemon]Freezing user space processes ...
<5>[90380.336896] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90380.338449] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90380.338477] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90380.358373] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: NETLINK
<3>[90380.358410] (3)[10823:Binder:636_2]Freezing of tasks aborted after 0.022
seconds
<6>[90380.358433] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90380.358449] (0)[1314:receiver]Restarting tasks ...
<6>[90380.363801] (0)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90380.363998] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90380.364285] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90380.374830] done.
<5>[90380.374869] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90380.374887] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90380.379608] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90380.380691] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176952,7651,12563scp1 sleep state: 54647,23343,23343
<6>[90380.380733] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90380.380733]
<5>[90380.380751] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90380.380764] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90380.380785] -(3)[10823:Binder:636_2]Abort: Pending Wakeup Sources: NETLINK
<5>[90380.380801] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90380.381856] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<36>[90380.383100] (3)[576:logd.auditd]type=1400 audit(1671082736.102:1622979):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90380.383421] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90380.383470] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:38:56.103877195 UTC
<6>[90380.383678] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90380.383786] (3)[7406:kworker/3:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90380.383803] (3)[7406:kworker/3:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90380.383843] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90380.383865] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90380.383885] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90380.384430] -(2)[0:swapper/2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<5>[90380.435149] -(2)[0:swapper/2]lvts_paused = 1
<6>[90380.586261] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90380.586304] (2)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90380.586549] (2)[7383:kworker/u16:6]PM: ++
<7>[90380.593890] (2)[7383:kworker/u16:6]PM: --
<5>[90380.600038] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90380.600107] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90380.600158] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90380.600201] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90380.600290] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<4>[90380.695285] done.
<6>[90380.701271] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10176962,7655,12578scp1 sleep state: 54649,23343,23343
<6>[90380.701305] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90380.701305]
<6>[90380.701329] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90380.701329]
<6>[90380.701352] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90380.701352]
<6>[90380.701374] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90380.701374]
<5>[90380.701396] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90380.701414] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90380.701443] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90380.701471] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90380.701712] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90380.701745] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:38:56.422167272 UTC
<6>[90380.701922] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90380.701980] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90380.702007] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90380.702029] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90380.702150] (3)[576:logd.auditd]type=1400 audit(1671082736.418:1622980):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90380.703989] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<4>[90380.729726] (elapsed 0.027 seconds) done.
<6>[90380.729767] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90380.729787] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90380.784594] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90380.784639] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90380.784701] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90380.785976] (2)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90380.786141] (1)[19178:kworker/u16:2]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90380.786213] (0)[23444:kworker/u16:7]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90380.786805] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90380.786910] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90380.786941] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90380.787826] (2)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90380.788262] (2)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90380.788276] (0)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90380.788293] (1)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<6>[90380.789397] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90380.789421] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90380.789447] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90380.790235] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217482850000000 to 2022/12/15 05:39:17 (now = 2022/12/15 05:38:56)
<5>[90380.790347] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:18 (1)
<5>[90380.793748] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90380.794402] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90380.794438] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90380.794447] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90380.794541] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90380.794577] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90380.794615] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90380.794615]
<6>[90380.794635] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90380.794635]
<6>[90380.794654] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90380.794654]
<6>[90380.794672] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90380.794672]
<6>[90380.794774] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90380.794811] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90380.794831] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90380.795396] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90380.795467] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90380.795662] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90380.795966] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90380.795985] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90380.796366] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90380.796381] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90380.796776] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90380.797098] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,728 us
<6>[90380.797945] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90380.798250] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90380.798362] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90380.798723] (1)[10823:Binder:636_2]suspend of devices complete after 54.226
msecs
<6>[90380.804864] (1)[10823:Binder:636_2]late suspend of devices complete after
6.114 msecs
<4>[90380.804888] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90380.810016]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90380.810738] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90380.811067] (1)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90380.811763] (1)[10823:Binder:636_2]noirq suspend of devices complete after
6.238 msecs
<6>[90380.811823] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90380.811823] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90380.811823] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90380.811894] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90380.811894] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90380.811894] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90380.811894] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90380.811894] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90380.811894] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 339208, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x43ca740f, wlk_cntcv_h = 0x292, 26M_off_pct =
12
<6>[90380.811894] -(1)[0:swapper/1][ccci1/WK]CCIF RX bitmap:0x10
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 10.351 seconds
<4>[90380.811894] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90380.811894] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90380.811894] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90380.811894] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90380.811894] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90380.811894] -(1)[0:swapper/1]Call trace:
<4>[90380.811894] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90380.811894] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90380.811894] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90380.811894] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90380.811894] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90380.811894] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90380.811894] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90380.811894] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90380.811894] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90380.811894] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90380.811894] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90380.811894] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90380.811894] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90380.811894] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90380.811894] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90380.811894] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90380.811894] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90380.811894] -(1)[0:swapper/1]---[ end trace 308173880bd0bf6e ]---
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 41347 (32k)
<4>[90380.811894] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 1.261/9.901/9.901/1.261/9.9901 seconds
<6>[90380.811894] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90380.812015] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x40000, 0x0)
<6>[90380.812055] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90380.812018] -(1)[0:swapper/1]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90380.813860] (1)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_resume
<5>[90380.814826]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90380.815117] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90380.817024] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90380.822363] (0)[10823:Binder:636_2]noirq resume of devices complete after
9.582 msecs
<6>[90380.822723] (3)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(77)
<6>[90380.822808] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90380.822828] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90380.827240] (0)[10823:Binder:636_2]early resume of devices complete after
4.365 msecs
<5>[90380.827737] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90380.829550] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90380.829855] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90380.829889] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1446 us
<5>[90380.830302] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90380.830807] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90380.830831] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90380.830897] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90380.830925] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90380.830997] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90380.831163] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90380.831211] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90380.831231] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90380.831301] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90380.831336] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90380.831439] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90380.831460] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90380.831471] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90380.831592] (0)[10823:Binder:636_2]zcvf, no update time:11 96 avgc:0
avgc_thread
<5>[90380.831614] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90380.834547] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90380.835418] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90380.835499] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90380.835792] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90380.835820] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90380.836450] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90380.836577] (0)[30807:kworker/0:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90380.838325] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90380.838642] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90380.838893] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90380.839448] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90380.839923] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90380.843835] (3)[10823:Binder:636_2]resume of devices complete after 16.567
msecs
<3>[90380.848789] (3)[7406:kworker/3:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90380.848813] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90380.849398] (3)[7406:kworker/3:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90380.849418] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90380.849595] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90380.849614] (1)[1315:receiver]Restarting tasks ...
<6>[90380.856978] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90380.857009] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90380.857113] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90380.857741] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<6>[90380.861882] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<12>[90380.866688] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90380.868661] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<4>[90380.869865] done.
<5>[90380.869884] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90380.869895] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90380.873563] (3)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90380.873958] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177196,7781,12719scp1 sleep state: 54651,23345,23345
<6>[90380.873983] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90380.873983]
<5>[90380.874001] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90380.874251] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90380.874273] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90380.874456] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90380.875591] -(6)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<12>[90380.875608] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<5>[90380.876977] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90380.878261] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90380.878300] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:06.953849811 UTC
<36>[90380.878584] (0)[576:logd.auditd]type=1400 audit(1671082746.947:1622981):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90380.878972] (0)[30822:kworker/0:7][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:7><0x7866>
<6>[90380.879038] (0)[30822:kworker/0:7]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90380.879049] (0)[30822:kworker/0:7]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90380.879080] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90380.879096] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90380.879142] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90380.881364] (0)[10823:Binder:636_2]PM: suspend exit
<12>[90380.885374] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90380.885417] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90380.891812] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<6>[90380.894088] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 339208, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<4>[90380.894143] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90380.894186] -(4)[7032:kworker/4:0]active wake lock :
NETLINK,last_time:90381018
<4>[90380.894202] -(4)[7032:kworker/4:0]active wake lock : main,last_time:90380964
<4>[90380.894210] -(4)[7032:kworker/4:0]active wake lock : usb,last_time:90380964
<4>[90380.894240] -(4)[7032:kworker/4:0]active wake lock :
ccci_fs,last_time:90380948
<6>[90380.894263] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<12>[90380.898577] (0)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90380.898624] (0)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90380.902930] (0)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90380.907525] (0)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<3>[90380.923664] (0)[7416:kworker/0:2]typec_cc_orientation = 2
<6>[90380.982500] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90380.982538] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90380.982576] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90380.982592] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90381.033337] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90381.084254] (0)[7416:kworker/0:2]chg_type = 0, hvdcp_type = 0
<6>[90381.136953] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90381.187566] (0)[7416:kworker/0:2]get_connector_temp: connector_temp:323
<6>[90381.187632] (0)[7416:kworker/0:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90381.187703] (0)[7416:kworker/0:2]mt_charger_plugin plugin:0
<6>[90381.438617] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90381.438661] (3)[2328:kworker/u16:1]PM: Syncing filesystems ...
<7>[90381.438892] (3)[2328:kworker/u16:1]PM: ++
<7>[90381.445919] (3)[2328:kworker/u16:1]PM: --
<4>[90381.547275] done.
<5>[90381.555540] -(0)[0:swapper/0]lvts_paused = 1
<6>[90381.556102] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177211,7789,12735scp1 sleep state: 54653,23345,23345
<6>[90381.556131] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90381.556131]
<6>[90381.556156] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90381.556156]
<6>[90381.556179] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90381.556179]
<6>[90381.556201] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90381.556201]
<5>[90381.556222] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90381.556240] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90381.556277] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90381.556305] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90381.556617] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90381.556650] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:07.632209426 UTC
<6>[90381.556853] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90381.556910] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00100ce2], N9_MCU_MAILBOX_DBG[0x18060268] read[0x87580402],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x5020c033], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90381.556938] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90381.556961] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90381.557159] (1)[576:logd.auditd]type=1400 audit(1671082747.627:1622982):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90381.558460] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90381.560260] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90381.560288] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90381.584707] (elapsed 0.027 seconds) done.
<6>[90381.584740] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90381.584760] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90381.640310] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90381.640360] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90381.640546] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: ccci_fs
<6>[90381.640574] (0)[10823:Binder:636_2]suspend of devices aborted after 41.000
msecs
<3>[90381.640593] (0)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<6>[90381.641763] (0)[10823:Binder:636_2]resume of devices complete after 1.144
msecs
<6>[90381.646405] (2)[10823:Binder:636_2]OOM killer enabled.
<3>[90381.646427] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90381.646445] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90381.646463] (0)[30807:kworker/0:5]Restarting tasks ...
<3>[90381.647059] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90381.647097] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90381.654303] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90381.654467] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90381.654820] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90381.670870] done.
<5>[90381.670905] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90381.670926] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90381.675836] (3)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90381.680850] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177216,7793,12759scp1 sleep state: 54655,23345,23345
<6>[90381.680887] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90381.680887]
<5>[90381.680910] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90381.680928] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90381.680952] -(2)[10823:Binder:636_2]Abort: Pending Wakeup Sources: ccci_fs
<5>[90381.680972] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90381.682170] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90381.682872] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90381.682907] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:07.758457119 UTC
<6>[90381.683087] (2)[26031:kworker/2:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:5><0x65af>
<6>[90381.683156] (2)[26031:kworker/2:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90381.683166] (2)[26031:kworker/2:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<36>[90381.683172] (1)[576:logd.auditd]type=1400 audit(1671082747.755:1622983):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90381.683189] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0200c0e] wf
<6>[90381.683218] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90381.683239] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90381.683252] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90381.876141] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90381.884491] (2)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90381.943449] (2)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3933,Cur:146,Temp:337,RM:2241,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90382.241984] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90382.242135] (0)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90382.242354] (0)[23443:kworker/u16:5]PM: ++
<7>[90382.251682] (0)[23443:kworker/u16:5]PM: --
<4>[90382.353539] done.
<6>[90382.362756] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177232,7802,12779scp1 sleep state: 54657,23345,23345
<6>[90382.362815] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90382.362815]
<6>[90382.362840] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90382.362840]
<6>[90382.362863] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90382.362863]
<6>[90382.362885] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90382.362885]
<5>[90382.362908] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90382.362926] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90382.362961] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90382.362991] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90382.363349] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90382.363384] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:08.438942042 UTC
<6>[90382.363600] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90382.363658] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90382.363687] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90382.363712] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90382.363942] (0)[576:logd.auditd]type=1400 audit(1671082748.435:1622984):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90382.365097] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90382.366799] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90382.366829] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90382.393527] (elapsed 0.029 seconds) done.
<6>[90382.393564] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90382.393584] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90382.455634] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90382.455691] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90382.455768] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90382.457314] (3)[2328:kworker/u16:1]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90382.457389] (0)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90382.457589] (2)[7405:kworker/u16:10]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90382.458109] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90382.458234] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90382.458270] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90382.459655] (0)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90382.459714] (3)[2328:kworker/u16:1][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90382.459769] (3)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90382.459934] (2)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<6>[90382.461484] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90382.461510] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90382.461541] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90382.462527] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217482850000000 to 2022/12/15 05:39:17 (now = 2022/12/15 05:39:08)
<5>[90382.462649] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:18 (1)
<5>[90382.466322] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90382.466799] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90382.466839] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90382.466851] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90382.466971] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90382.467017] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90382.467068] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90382.467068]
<6>[90382.467092] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90382.467092]
<6>[90382.467113] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90382.467113]
<6>[90382.467136] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90382.467136]
<6>[90382.467264] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90382.467307] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90382.467331] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90382.468044] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90382.468132] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90382.468366] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90382.468749] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90382.468771] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90382.469193] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90382.469212] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90382.469686] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90382.470144] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,946 us
<6>[90382.471161] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90382.471462] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90382.471599] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90382.472009] (0)[10823:Binder:636_2]suspend of devices complete after 61.207
msecs
<6>[90382.478164] (0)[10823:Binder:636_2]late suspend of devices complete after
6.124 msecs
<4>[90382.478193] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90382.483189]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90382.483821] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90382.484162] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90382.484773] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.664 msecs
<6>[90382.484857] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90382.484857] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90382.484857] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90382.484940] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90382.484940] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90382.484940] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 149399, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x489f66a0, wlk_cntcv_h = 0x292, 26M_off_pct =
88
<6>[90382.484940] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x10
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 4.559 seconds
<4>[90382.484940] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90382.484940] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90382.484940] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90382.484940] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90382.484940] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90382.484940] -(0)[0:swapper/0]Call trace:
<4>[90382.484940] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90382.484940] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90382.484940] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90382.484940] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90382.484940] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90382.484940] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90382.484940] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90382.484940] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90382.484940] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90382.484940] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90382.484940] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90382.484940] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90382.484940] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90382.484940] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90382.484940] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90382.484940] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90382.484940] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90382.484940] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90382.484940] -(0)[0:swapper/0]---[ end trace 308173880bd0bf6f ]---
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 129822 (32k)
<4>[90382.484940] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 3.961/4.101/4.101/4.035/4.4101 seconds
<6>[90382.484940] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90382.485064] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x40000, 0x0)
<6>[90382.485107] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90382.485074] -(0)[0:swapper/0]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90382.486963] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90382.487891]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90382.487916] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90382.490108] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90382.495605] (0)[10823:Binder:636_2]noirq resume of devices complete after
9.601 msecs
<6>[90382.495919] (3)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(78)
<6>[90382.496096] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90382.496119] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90382.501009] (0)[10823:Binder:636_2]early resume of devices complete after
4.837 msecs
<5>[90382.501428] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90382.503450] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90382.503816] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90382.503853] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1527 us
<5>[90382.504122] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90382.504723] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90382.504750] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90382.504826] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90382.504858] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90382.504951] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90382.505142] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90382.505199] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90382.505222] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90382.505305] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90382.505346] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90382.505467] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90382.505491] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90382.505505] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90382.505644] (0)[10823:Binder:636_2]zcvf, no update time:18 96 avgc:0
avgc_thread
<5>[90382.505677] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90382.508702] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90382.509719] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90382.509810] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90382.510288] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90382.510430] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90382.510953] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90382.511107] (0)[30822:kworker/0:7][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90382.513157] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90382.513516] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90382.513840] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90382.515401] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90382.515422] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90382.517784] (3)[10823:Binder:636_2]resume of devices complete after 16.742
msecs
<3>[90382.522321] (3)[7406:kworker/3:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90382.522345] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<6>[90382.522352] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90382.522368] (3)[7406:kworker/3:2]Restarting tasks ...
<3>[90382.523068] (3)[7406:kworker/3:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90382.523098] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90382.528822] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90382.528846] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90382.528946] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90382.529422] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217482850000000
<4>[90382.541398] done.
<5>[90382.541434] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90382.541452] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90382.545165] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90382.548376] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177342,7859,12854scp1 sleep state: 54659,23347,23347
<6>[90382.548398] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90382.548398]
<5>[90382.548413] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90382.548424] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90382.548444] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90382.548456] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90382.549726] -(6)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90382.550936] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90382.553081] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90382.553128] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:13.191535349 UTC
<6>[90382.553294] (1)[7390:kworker/1:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:5><0x1cde>
<6>[90382.553367] (1)[7390:kworker/1:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90382.553379] (1)[7390:kworker/1:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90382.553404] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90382.553413] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90382.553439] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90382.553455] (1)[10823:Binder:636_2]PM: suspend exit
<36>[90382.556775] (0)[576:logd.auditd]type=1400 audit(1671082753.187:1622985):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<3>[90382.599147] (0)[3064:kworker/0:0]typec_cc_orientation = 2
<5>[90382.600355] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90382.600415] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90382.600454] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90382.600484] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90382.654817] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90382.654860] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90382.654901] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90382.712204] (0)[7416:kworker/0:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90382.760526] (0)[3064:kworker/0:0]chg_type = 0, hvdcp_type = 0
<3>[90382.810915] (0)[3064:kworker/0:0]get_connector_temp: connector_temp:323
<6>[90382.811589] (0)[3064:kworker/0:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90382.812240] (0)[3064:kworker/0:0]mt_charger_plugin plugin:0
<6>[90382.865096] (0)[7416:kworker/0:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90382.884570] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90383.138178] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90383.138231] (0)[25368:kworker/u16:9]PM: Syncing filesystems ...
<7>[90383.138369] (0)[25368:kworker/u16:9]PM: ++
<7>[90383.145302] (0)[25368:kworker/u16:9]PM: --
<6>[90383.202351] (0)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90383.206960] -(3)[27694:kworker/u17:1][ccci1/fsm]received MD status response
975f0043
<6>[90383.207252] (0)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3749
<4>[90383.246215] done.
<6>[90383.253558] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177358,7870,12873scp1 sleep state: 54661,23347,23347
<6>[90383.253615] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90383.253615]
<6>[90383.253640] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90383.253640]
<6>[90383.253663] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90383.253663]
<6>[90383.253685] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90383.253685]
<5>[90383.253707] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90383.253726] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90383.253766] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90383.253795] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90383.254268] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90383.254304] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:13.892722964 UTC
<6>[90383.254505] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90383.254563] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90383.254591] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90383.254617] (3)[613:teei_daemon]Freezing user space processes ...
<5>[90383.255962] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90383.257632] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90383.257662] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90383.258434] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 676,
576, 579, 627, 268, 178, 137, 76, success counter cpu: 147, 98, 105, 102, 58, 22,
8, 1, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 220, 169,
181, 175, 93, 29, 13, 2, o: 4-7, p: , f: , t: 90383388000000, 90383388000000,
90383388000000, 90383388000000, 90383420000000, 90383484000000, 90383644000000,
90383580000000,
<6>[90383.278841] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: ccci_poll
<3>[90383.278880] (1)[10823:Binder:636_2]Freezing of tasks aborted after 0.024
seconds
<6>[90383.278903] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90383.278918] (0)[1315:receiver]Restarting tasks ...
<6>[90383.285339] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90383.285588] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90383.286450] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90383.302917] done.
<5>[90383.302957] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90383.302980] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90383.307481] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90383.309372] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177362,7871,12886scp1 sleep state: 54663,23354,23354
<6>[90383.309404] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90383.309404]
<5>[90383.309428] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90383.309446] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90383.309473] -(1)[10823:Binder:636_2]Abort: Pending Wakeup Sources: ccci_poll
<5>[90383.309494] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90383.310634] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90383.311787] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90383.311844] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:13.950243041 UTC
<6>[90383.312122] (1)[7390:kworker/1:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:5><0x1cde>
<6>[90383.312257] (1)[7390:kworker/1:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90383.312279] (1)[7390:kworker/1:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90383.312328] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90383.312358] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90383.312382] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90383.312450] (6)[437:wdtk-6]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90383.519054] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0x40,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383519035600,15000000]
<6>[90383.519099] (6)[437:wdtk-6][thread:437][RT:90383519090369] 2022-12-15
05:39:14.157519 UTC;android time 2022-12-15 12:39:14.157519
<6>[90383.519324] (1)[10823:Binder:636_2]active wakeup source: ccci_poll
<5>[90383.545121] -(3)[0:swapper/3]lvts_paused = 1
<6>[90383.550389] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x44,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383550366908,14968669]
<6>[90383.550435] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x64,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383550423215,14968612]
<6>[90383.591994] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x66,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383591963215,14927073]
<6>[90383.593324] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x76,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383593312446,14925723]
<6>[90383.594216] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x77,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383594191600,14924844]
<6>[90383.595015] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xf7,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383595008215,14924027]
<6>[90383.595203] (3)[434:wdtk-3][wdk-k]
cpu=3,lbit=0xff,cbit=0xff,7,1,2667932697,90383254291215,90383311811292,
[90383595168831,14923867]
<6>[90383.613058] (7)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3938,Cur:106,Temp:337,RM:2241,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90383.710888] (7)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90383.710917] (6)[25368:kworker/u16:9]PM: Syncing filesystems ...
<7>[90383.711320] (6)[25368:kworker/u16:9]PM: ++
<7>[90383.717651] (4)[25368:kworker/u16:9]PM: --
<6>[90383.746235] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90383.746996] (4)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<4>[90383.819118] done.
<6>[90383.825695] (5)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177374,7877,12904scp1 sleep state: 54664,23355,23355
<6>[90383.825731] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90383.825731]
<6>[90383.825745] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90383.825745]
<6>[90383.825755] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90383.825755]
<6>[90383.825764] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90383.825764]
<5>[90383.825774] (5)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90383.825784] (5)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90383.825803] (5)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90383.825820] (5)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90383.826083] (5)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90383.826103] (5)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:14.464529118 UTC
<6>[90383.826209] (5)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90383.826238] (5)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90383.826252] (5)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90383.826266] (1)[613:teei_daemon]Freezing user space processes ...
<5>[90383.826744] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90383.827208] (6)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90383.827237] (6)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90383.836550] (elapsed 0.010 seconds) done.
<6>[90383.836579] (5)[10823:Binder:636_2]OOM killer disabled.
<6>[90383.836590] (5)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.005 seconds) done.
<5>[90383.860151] -(4)[0:swapper/4]lvts_paused = 1
<3>[90383.887688] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90383.887742] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90383.887820] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90383.889351] (1)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90383.889541] (2)[25368:kworker/u16:9]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90383.889800] (2)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90383.889846] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90383.889970] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90383.890066] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90383.891129] (1)[23443:kworker/u16:5][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90383.892291] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90383.892345] (2)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90383.892501] (2)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90383.893071] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90383.893099] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90383.893131] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90383.894105] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217482850000000 to 2022/12/15 05:39:17 (now = 2022/12/15 05:39:14)
<5>[90383.894226] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:18 (1)
<5>[90383.896493] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90383.896957] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90383.896996] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90383.897007] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90383.897122] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90383.897165] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90383.897214] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90383.897214]
<6>[90383.897237] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90383.897237]
<6>[90383.897260] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90383.897260]
<6>[90383.897282] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90383.897282]
<6>[90383.897422] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90383.897469] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90383.897495] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90383.898255] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90383.898344] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90383.898580] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90383.898967] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90383.898990] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90383.899460] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90383.899479] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90383.899904] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90383.900232] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,766 us
<6>[90383.901244] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90383.901551] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90383.901686] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90383.902193] (3)[10823:Binder:636_2]suspend of devices complete after 58.919
msecs
<6>[90383.909685] (3)[10823:Binder:636_2]late suspend of devices complete after
7.458 msecs
<4>[90383.909714] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90383.915931]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90383.916585] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90383.916967] (3)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90383.917782] (3)[10823:Binder:636_2]noirq suspend of devices complete after
7.067 msecs
<6>[90383.917858] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90383.917858] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90383.917858] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90383.917944] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90383.917944] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90383.917944] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 121775, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x4c9d85a3, wlk_cntcv_h = 0x292, 26M_off_pct =
78
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 3.716 seconds
<4>[90383.917944] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90383.917944] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90383.917944] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90383.917944] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90383.917944] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90383.917944] -(3)[0:swapper/3]Call trace:
<4>[90383.917944] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90383.917944] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90383.917944] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90383.917944] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90383.917944] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90383.917944] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90383.917944] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90383.917944] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90383.917944] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90383.917944] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90383.917944] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90383.917944] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90383.917944] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90383.917944] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90383.917944] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90383.917944] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90383.917944] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90383.917944] -(3)[0:swapper/3]---[ end trace 308173880bd0bf70 ]---
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 105939 (32k)
<4>[90383.917944] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 3.233/3.768/4.038/3.666/4.4064 seconds
<6>[90383.917944] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90383.917944] -(3)[0:swapper/3]EINT 222 is pending
<6>[90383.918088] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x40000, 0x0)
<6>[90383.918133] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90383.918101] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90383.920352] (3)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90383.921863]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90383.921892] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90383.923938] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90383.929841] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.829 msecs
<6>[90383.930188] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90383.930318] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90383.930425] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90383.930476] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90383.930621] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90383.930649] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90383.935609] (2)[10823:Binder:636_2]early resume of devices complete after
4.900 msecs
<5>[90383.936062] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90383.938157] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90383.938476] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90383.938517] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1637 us
<5>[90383.938789] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90383.939433] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90383.939461] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90383.939543] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90383.939576] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90383.939664] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90383.939862] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90383.939923] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90383.939945] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90383.940029] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90383.940071] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90383.940194] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90383.940219] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90383.940233] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90383.940386] (2)[10823:Binder:636_2]zcvf, no update time:23 96 avgc:0
avgc_thread
<5>[90383.940414] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90383.943925] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90383.945055] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90383.945152] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90383.945466] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90383.945500] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90383.946187] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90383.946352] (2)[7305:kworker/2:0][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90383.948461] (2)[7305:kworker/2:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90383.948829] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90383.950222] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90383.950244] (5)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<3>[90383.950976] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90383.951889] (5)[10823:Binder:636_2]resume of devices complete after 16.253
msecs
<3>[90383.954137] (5)[27096:kworker/5:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90383.954153] (5)[27096:kworker/5:3][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90383.954427] (5)[27096:kworker/5:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90383.954437] (5)[27096:kworker/5:3][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90383.954531] (5)[10823:Binder:636_2]OOM killer enabled.
<6>[90383.954541] (6)[1314:receiver]Restarting tasks ...
<6>[90383.957197] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90383.957330] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90383.957505] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90383.962392] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90383.962434] done.
<5>[90383.962450] (5)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90383.962461] (5)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90383.966211] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90383.967080] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217499547000000
<6>[90383.969532] (6)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177464,7928,12974scp1 sleep state: 54666,23355,23355
<6>[90383.969565] (6)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90383.969565]
<5>[90383.969582] (6)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90383.969595] (6)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90383.969614] -(6)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90383.969626] (6)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90383.970474] -(5)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90383.970773] (6)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90383.971415] (6)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90383.971451] (6)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:18.329697195 UTC
<6>[90383.971611] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90383.971681] (6)[30505:kworker/6:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90383.971690] (6)[30505:kworker/6:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90383.971700] (6)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90383.971722] (6)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90383.971741] (6)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90383.971756] (6)[10823:Binder:636_2]PM: suspend exit
<5>[90383.974594] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217499547000000
<6>[90384.004678] -(0)[7033:lowpool[171]][ccci1/dpmaif]tx0_resume_tx: 0xc0000,
0x40000, 0x0
<6>[90384.004740] -(4)[4028:ndroid.systemui][ccci1/dpmaif]wake up by MD0 HIF
L2(8400/0)(3e0/0)!
<5>[90384.005097] -(5)[5444:Binder:1454_19]alarmtimer_enqueue, 217499547000000
<6>[90384.006979] -(5)[4678:lowpool[160]][ccci1/dpmaif]wake up by MD0 HIF L2(21/0)
(3e0/0)!
<6>[90384.007002] -(5)[4678:lowpool[160]][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x40000, 0x0
<6>[90384.007587] (2)[1307:dpmaif_txq0_don][ccci1/dpmaif]DPMA_MD wakeup source:
(0/2)
<6>[90384.039036] (1)[7390:kworker/1:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90384.075373] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90384.075421] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90384.143161] (1)[7390:kworker/1:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90384.247748] (2)[26031:kworker/2:5]typec_cc_orientation = 2
<3>[90384.296612] (2)[26031:kworker/2:5]chg_type = 0, hvdcp_type = 0
<3>[90384.400477] (2)[26031:kworker/2:5]get_connector_temp: connector_temp:323
<6>[90384.400535] (2)[26031:kworker/2:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90384.400594] (2)[26031:kworker/2:5]mt_charger_plugin plugin:0
<6>[90384.402705] (1)[1656:watchdog]AEEIOCTL_RT_MON_Kick ( 300)
<6>[90384.402734] (1)[1656:watchdog][Hang_Detect] hang_detect enabled 10
<6>[90384.417480] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90384.417511] (4)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90384.418215] (4)[7383:kworker/u16:6]PM: ++
<7>[90384.428802] (3)[7383:kworker/u16:6]PM: --
<4>[90384.523279] done.
<6>[90384.530744] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177479,7933,12988scp1 sleep state: 54668,23356,23356
<6>[90384.530797] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90384.530797]
<6>[90384.530821] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90384.530821]
<6>[90384.530844] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90384.530844]
<6>[90384.530866] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90384.530866]
<5>[90384.530888] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90384.530906] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90384.530943] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90384.530972] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90384.531291] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90384.531324] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:18.889581118 UTC
<6>[90384.531518] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90384.531574] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90384.531601] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90384.531624] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90384.531822] (2)[576:logd.auditd]type=1400 audit(1671082758.888:1622990):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90384.532836] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90384.534535] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90384.534563] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90384.559600] (elapsed 0.027 seconds) done.
<6>[90384.559633] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90384.559653] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90384.613542] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90384.613586] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90384.613646] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90384.614956] (3)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90384.615832] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90384.615935] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90384.615970] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90384.616770] (3)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90384.617081] (3)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<5>[90384.617103] (1)[7405:kworker/u16:10]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90384.617172] (3)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90384.617387] (3)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90384.617457] (1)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<6>[90384.618545] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90384.618570] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90384.618599] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90384.619326] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217499547000000 to 2022/12/15 05:39:33 (now = 2022/12/15 05:39:18)
<5>[90384.619508] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:34 (1)
<5>[90384.622881] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90384.623300] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90384.623336] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90384.623346] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90384.623453] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90384.623496] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90384.623542] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90384.623542]
<6>[90384.623564] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90384.623564]
<6>[90384.623586] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90384.623586]
<6>[90384.623608] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90384.623608]
<6>[90384.623720] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90384.623761] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90384.623784] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90384.624398] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90384.624481] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90384.624704] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90384.625039] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90384.625059] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90384.625447] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90384.625466] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90384.625859] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90384.626197] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,743 us
<6>[90384.626968] (3)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000f
<6>[90384.627221] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90384.627337] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90384.627716] (3)[10823:Binder:636_2]suspend of devices complete after 53.161
msecs
<6>[90384.632866] (3)[10823:Binder:636_2]late suspend of devices complete after
5.122 msecs
<4>[90384.632892] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90384.637331]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90384.637982] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90384.638399] (1)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90384.639045] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.508 msecs
<6>[90384.639126] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90384.639126] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90384.639126] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90384.639202] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90384.639202] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90384.639202] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90384.639202] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90384.639202] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90384.639202] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 2753, r13 = 0xc40019ac, debug_flag =
0xf8040300 0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6563fb, req_sta =
0x1c000ff 0x0 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x4d3dda2b, wlk_cntcv_h = 0x292,
26M_off_pct = 0
<6>[90384.639202] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x0
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 0.084 seconds
<4>[90384.639202] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90384.639202] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90384.639202] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90384.639202] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90384.639202] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90384.639202] -(3)[0:swapper/3]Call trace:
<4>[90384.639202] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90384.639202] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90384.639202] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90384.639202] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90384.639202] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90384.639202] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90384.639202] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90384.639202] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90384.639202] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90384.639202] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90384.639202] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90384.639202] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90384.639202] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90384.639202] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90384.639202] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90384.639202] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90384.639202] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90384.639202] -(3)[0:swapper/3]---[ end trace 308173880bd0bf71 ]---
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90384.639202] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/0.000/0.000/0.000/0.000 seconds
<6>[90384.639202] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90384.639311] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90384.639339] -(3)[0:swapper/3]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90384.640893] (1)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90384.642651]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90384.642678] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90384.644601] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90384.650152] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.031 msecs
<6>[90384.650316] -(4)[0:swapper/4][ccci1/dpmaif]wake up by MD0 HIF L2(20/1)
(3e0/0)!
<6>[90384.650348] (4)[0:swapper/4][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90384.651007] -(2)[10823:Binder:636_2][ccci1/dpmaif]tx1_resume_tx: 0x80000,
0x40000, 0x0
<6>[90384.651097] -(0)[0:swapper/0][ccci1/dpmaif]clear txq1_resume_done: 0x80000,
0x40000, 0x0
<6>[90384.651194] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccmni_md1
<4>[90384.651217] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90384.656129] (2)[10823:Binder:636_2]early resume of devices complete after
4.863 msecs
<5>[90384.656562] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90384.659485] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90384.659788] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90384.659824] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2464 us
<5>[90384.660097] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90384.660699] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90384.660727] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90384.660798] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90384.660829] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90384.660908] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90384.661094] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90384.661154] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90384.661176] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90384.661259] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90384.661300] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90384.661421] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90384.661445] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90384.661459] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90384.661601] (2)[10823:Binder:636_2]zcvf, no update time:24 96 avgc:0
avgc_thread
<5>[90384.661627] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90384.664953] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90384.666098] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90384.666194] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90384.666488] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90384.666522] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90384.667221] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90384.667385] (2)[7519:kworker/2:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90384.669475] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90384.670250] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90384.670387] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90384.670767] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<3>[90384.670817] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90384.673514] (1)[10823:Binder:636_2]resume of devices complete after 17.342
msecs
<3>[90384.677847] (1)[7390:kworker/1:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90384.677868] (1)[7390:kworker/1:5][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<6>[90384.678284] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90384.678302] (1)[7390:kworker/1:5]Restarting tasks ...
<3>[90384.678573] (1)[7390:kworker/1:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90384.678600] (1)[7390:kworker/1:5][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<5>[90384.684214] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90384.684281] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90384.684325] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90384.684361] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90384.685634] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90384.685685] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90384.685723] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90384.686681] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217499547000000
<4>[90384.698917] done.
<5>[90384.698949] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90384.698966] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90384.702440] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90384.704825] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177491,7940,13014scp1 sleep state: 54669,23359,23359
<6>[90384.704847] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90384.704847]
<5>[90384.704861] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90384.704871] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90384.704889] -(3)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90384.705024] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90384.705423] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90384.706314] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90384.707045] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90384.707100] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:19.152171656 UTC
<6>[90384.707342] (0)[7416:kworker/0:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:2><0x1cf8>
<6>[90384.707451] (0)[7416:kworker/0:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90384.707472] -(0)[7416:kworker/0:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90384.707484] (2)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90384.707544] (2)[576:logd.auditd]type=1400 audit(1671082759.148:1622991):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90384.707953] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90384.707988] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90384.708013] (0)[10823:Binder:636_2]PM: suspend exit
<5>[90384.724427] -(0)[5449:Binder:1454_1C]alarmtimer_enqueue, 217499547000000
<3>[90384.757159] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90384.810104] (4)[10823:Binder:636_2]active wakeup source: main
<6>[90384.810133] (4)[10823:Binder:636_2]active wakeup source: usb
<6>[90384.810166] (4)[10823:Binder:636_2]active wakeup source: ccmni_md1
<6>[90384.826188] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90384.826456] (2)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<3>[90384.861659] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<3>[90384.943472] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:323
<6>[90384.943927] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90384.944371] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<6>[90384.969162] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90384.990369] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90385.071720] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90385.663468] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90385.663512] (3)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90385.663718] (3)[23444:kworker/u16:7]PM: ++
<7>[90385.671517] (3)[23444:kworker/u16:7]PM: --
<6>[90385.726972] (0)[7416:kworker/0:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:2><0x1cf8>
<4>[90385.770262] done.
<6>[90385.776287] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177517,7954,13038scp1 sleep state: 54671,23359,23359
<6>[90385.776319] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90385.776319]
<6>[90385.776344] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90385.776344]
<6>[90385.776366] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90385.776366]
<6>[90385.776388] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90385.776388]
<5>[90385.776410] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90385.776427] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90385.776462] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90385.776491] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90385.776811] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90385.776844] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:20.221937195 UTC
<6>[90385.777031] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90385.777088] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90385.777116] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90385.777138] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90385.777267] (3)[576:logd.auditd]type=1400 audit(1671082760.216:1622992):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90385.778633] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90385.779756] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90385.779831] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90385.788793] (0)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3929,Cur:281,Temp:337,RM:2241,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90385.804916] (elapsed 0.027 seconds) done.
<6>[90385.804956] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90385.804973] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<5>[90385.829874] -(2)[0:swapper/2]lvts_paused = 1
<3>[90385.860262] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90385.860306] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90385.860367] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90385.861689] (1)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90385.861881] (3)[23444:kworker/u16:7]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90385.862138] (3)[23436:kworker/u16:0]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90385.862469] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90385.862573] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90385.862609] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90385.863584] (1)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90385.864237] (1)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90385.864281] (3)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90385.864345] (3)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<6>[90385.864940] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90385.864968] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90385.864995] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90385.865735] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217499547000000 to 2022/12/15 05:39:34 (now = 2022/12/15 05:39:20)
<5>[90385.865853] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:35 (1)
<5>[90385.869379] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90385.869797] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90385.869833] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90385.869845] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90385.869944] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90385.870050] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90385.870097] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90385.870097]
<6>[90385.870120] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90385.870120]
<6>[90385.870141] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90385.870141]
<6>[90385.870162] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90385.870162]
<6>[90385.870271] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90385.870309] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90385.870333] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90385.870926] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90385.871007] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90385.871231] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90385.871583] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90385.871605] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90385.872022] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90385.872041] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90385.872443] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90385.872779] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,751 us
<6>[90385.873571] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90385.873840] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90385.873962] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90385.874418] (0)[10823:Binder:636_2]suspend of devices complete after 54.845
msecs
<6>[90385.879943] (0)[10823:Binder:636_2]late suspend of devices complete after
5.493 msecs
<4>[90385.879971] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90385.884611]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90385.885242] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90385.885587] (3)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90385.886385] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.732 msecs
<6>[90385.886461] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90385.886461] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90385.886461] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<6>[90385.886539] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90385.886539] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90385.886539] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90385.886539] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90385.886539] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90385.886539] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 51523, r13 = 0xc400f9bc, debug_flag = 0xf8040300
0x40000002, connectivity not sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c3d0ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x4f6dbf60, wlk_cntcv_h = 0x292, 26M_off_pct = 0
<6>[90385.886539] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x10
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 1.572 seconds
<4>[90385.886539] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90385.886539] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90385.886539] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90385.886539] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90385.886539] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90385.886539] -(0)[0:swapper/0]Call trace:
<4>[90385.886539] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90385.886539] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90385.886539] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90385.886539] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90385.886539] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90385.886539] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90385.886539] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90385.886539] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90385.886539] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90385.886539] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90385.886539] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90385.886539] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90385.886539] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90385.886539] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90385.886539] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90385.886539] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90385.886539] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90385.886539] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90385.886539] -(0)[0:swapper/0]---[ end trace 308173880bd0bf72 ]---
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90385.886539] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/1.000/1.000/0.000/1.1000 seconds
<6>[90385.886539] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90385.886648] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90385.886673] -(0)[0:swapper/0]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90385.888324] (3)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90385.889133]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90385.889159] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90385.891272] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90385.896775] (0)[10823:Binder:636_2]noirq resume of devices complete after
9.284 msecs
<6>[90385.897073] (1)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(79)
<6>[90385.897277] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90385.897300] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90385.902209] (0)[10823:Binder:636_2]early resume of devices complete after
4.858 msecs
<5>[90385.902617] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90385.905390] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90385.905769] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90385.905806] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2534 us
<5>[90385.906147] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90385.906492] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90385.906517] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90385.906592] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90385.906624] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90385.906706] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90385.906895] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90385.906954] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90385.906975] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90385.907057] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90385.907099] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90385.907226] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90385.907250] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90385.907263] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90385.907404] (0)[10823:Binder:636_2]zcvf, no update time:27 96 avgc:0
avgc_thread
<5>[90385.907432] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90385.910726] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90385.911708] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90385.911800] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90385.912093] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90385.912127] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90385.912782] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90385.912922] (0)[30807:kworker/0:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90385.915046] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90385.915606] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90385.916515] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90385.917535] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90385.917638] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90385.920243] (1)[10823:Binder:636_2]resume of devices complete after 18.001
msecs
<3>[90385.924640] (1)[7390:kworker/1:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90385.924658] (1)[7390:kworker/1:5][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90385.925175] (1)[7390:kworker/1:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90385.925191] (1)[7390:kworker/1:5][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90385.925351] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90385.925365] (5)[1315:receiver]Restarting tasks ...
<6>[90385.932472] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90385.932521] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90385.933290] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90385.933482] -(0)[1893:AlarmManager]alarmtimer_enqueue: 1 callbacks suppressed
<5>[90385.933493] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217499547000000
<12>[90385.943626] (0)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<12>[90385.943694] (0)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<4>[90385.947305] done.
<5>[90385.947331] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90385.947347] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90385.950555] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90385.950828] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177560,7977,13082scp1 sleep state: 54673,23359,23359
<6>[90385.950855] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90385.950855]
<5>[90385.950879] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90385.950897] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90385.950923] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90385.950942] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90385.952014] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90385.952369] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90385.953169] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90385.953216] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:21.973538963 UTC
<6>[90385.953394] (1)[7390:kworker/1:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:5><0x1cde>
<36>[90385.953431] (2)[576:logd.auditd]type=1400 audit(1671082761.966:1622993):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90385.953465] (1)[7390:kworker/1:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90385.953478] (1)[7390:kworker/1:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90385.953508] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90385.953525] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90385.953541] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90385.953668] (0)[853:[email protected]]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<12>[90385.962189] (0)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<12>[90385.969164] (4)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<12>[90385.969224] (4)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<12>[90385.977801] (4)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<6>[90385.980016] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<12>[90385.982983] (0)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<12>[90385.983043] (0)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<12>[90385.987088] (4)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<12>[90385.991923] (4)[853:[email protected]]healthd: battery l=59 v=3923 t=33.7 h=2
st=3 c=260 fc=4110000 cc=670 chg=
<3>[90386.000748] (0)[30807:kworker/0:5]typec_cc_orientation = 2
<6>[90386.018005] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 51523, r13 = 0xc400f9bc, debug_flag = 0xf8040300
0x40000002, connectivity not sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c3d0ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90386.018028] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90386.055518] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90386.055716] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90386.055755] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90386.112041] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90386.161362] (0)[30807:kworker/0:5]chg_type = 0, hvdcp_type = 0
<3>[90386.213159] (0)[30807:kworker/0:5]get_connector_temp: connector_temp:324
<6>[90386.213226] (0)[30807:kworker/0:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90386.213291] (0)[30807:kworker/0:5]mt_charger_plugin plugin:0
<6>[90386.265013] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90386.526482] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90386.526527] (0)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90386.526744] (0)[23437:kworker/u16:3]PM: ++
<7>[90386.534311] (0)[23437:kworker/u16:3]PM: --
<4>[90386.635320] done.
<6>[90386.658161] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177574,7990,13104scp1 sleep state: 54675,23359,23359
<6>[90386.658211] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90386.658211]
<6>[90386.658236] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90386.658236]
<6>[90386.658259] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90386.658259]
<6>[90386.658281] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90386.658281]
<5>[90386.658303] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90386.658321] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90386.658357] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90386.658402] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90386.658706] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90386.658739] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:22.679077194 UTC
<6>[90386.658927] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90386.658983] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90386.659010] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90386.659034] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90386.659182] (2)[576:logd.auditd]type=1400 audit(1671082762.674:1622994):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90386.660346] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90386.661580] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90386.661605] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90386.686742] (elapsed 0.027 seconds) done.
<6>[90386.686780] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90386.686799] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90386.744121] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90386.744180] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90386.744257] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90386.745812] (0)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90386.746173] (1)[19178:kworker/u16:2]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90386.746186] (3)[23436:kworker/u16:0]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90386.746747] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90386.746875] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90386.746911] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90386.747884] (0)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90386.748370] (0)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90386.748467] (1)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90386.748505] (3)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<6>[90386.749586] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90386.749610] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90386.749642] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90386.750562] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217499547000000 to 2022/12/15 05:39:33 (now = 2022/12/15 05:39:22)
<5>[90386.750683] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:34 (1)
<5>[90386.754320] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90386.754780] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90386.754820] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90386.754831] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90386.754949] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90386.754993] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90386.755040] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90386.755040]
<6>[90386.755063] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90386.755063]
<6>[90386.755085] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90386.755085]
<6>[90386.755107] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90386.755107]
<6>[90386.755229] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90386.755274] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90386.755298] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90386.755958] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90386.756046] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90386.756282] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90386.756660] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90386.756683] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90386.757148] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90386.757167] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90386.757645] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90386.758046] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,892 us
<6>[90386.758911] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90386.759209] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90386.759347] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90386.759793] (1)[10823:Binder:636_2]suspend of devices complete after 57.944
msecs
<6>[90386.765496] (1)[10823:Binder:636_2]late suspend of devices complete after
5.671 msecs
<4>[90386.765525] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90386.770238]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90386.770879] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90386.771226] (0)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90386.771868] (1)[10823:Binder:636_2]noirq suspend of devices complete after
5.565 msecs
<6>[90386.771949] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90386.771949] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90386.771949] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90386.772027] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90386.772027] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90386.772027] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90386.772027] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90386.772027] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90386.772027] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 45952, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b65e3f9, req_sta = 0x1c000ff 0x180000
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x51344824, wlk_cntcv_h = 0x292, 26M_off_pct =
16
<6>[90386.772027] -(1)[0:swapper/1][ccci1/WK]CCIF RX bitmap:0x10
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 1.402 seconds
<4>[90386.772027] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90386.772027] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90386.772027] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90386.772027] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90386.772027] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90386.772027] -(1)[0:swapper/1]Call trace:
<4>[90386.772027] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90386.772027] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90386.772027] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90386.772027] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90386.772027] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90386.772027] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90386.772027] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90386.772027] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90386.772027] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90386.772027] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90386.772027] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90386.772027] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90386.772027] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90386.772027] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90386.772027] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90386.772027] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90386.772027] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90386.772027] -(1)[0:swapper/1]---[ end trace 308173880bd0bf73 ]---
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 7970 (32k)
<4>[90386.772027] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.243/2.001/1.982/0.345/2.2000 seconds
<6>[90386.772027] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90386.772150] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90386.772192] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90386.772163] -(1)[0:swapper/1]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90386.773685] (0)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_resume
<5>[90386.774823]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90386.774849] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90386.777129] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90386.782852] (0)[10823:Binder:636_2]noirq resume of devices complete after
9.921 msecs
<6>[90386.783153] (1)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(80)
<6>[90386.783433] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90386.783459] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90386.788419] (0)[10823:Binder:636_2]early resume of devices complete after
4.906 msecs
<5>[90386.789209] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90386.791208] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90386.791548] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90386.791585] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1530 us
<5>[90386.792304] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90386.792695] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90386.792721] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90386.792796] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90386.792829] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90386.792910] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90386.793095] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90386.793150] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90386.793172] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90386.793254] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90386.793296] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90386.793797] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90386.793826] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90386.793841] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90386.794058] (3)[10823:Binder:636_2]zcvf, no update time:29 96 avgc:0
avgc_thread
<5>[90386.794088] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90386.797205] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90386.798254] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90386.798349] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90386.798647] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90386.798681] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90386.799434] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90386.799521] (1)[7390:kworker/1:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90386.800406] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90386.800671] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90386.800782] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90386.800981] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90386.801594] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90386.804385] (0)[10823:Binder:636_2]resume of devices complete after 15.933
msecs
<3>[90386.808703] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90386.808742] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90386.809379] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90386.809403] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90386.809605] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90386.809627] (3)[1016:mi_thermald]Restarting tasks ...
<5>[90386.816350] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90386.816542] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90386.816615] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90386.816665] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90386.816695] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90386.817568] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90386.817624] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90386.817642] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90386.818805] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217499547000000
<4>[90386.831505] done.
<5>[90386.831528] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90386.831538] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90386.835520] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90386.838475] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177616,8013,13154scp1 sleep state: 54677,23359,23359
<6>[90386.838503] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90386.838503]
<5>[90386.838520] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90386.838533] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90386.838553] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90386.838567] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90386.839551] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90386.839995] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90386.840260] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90386.840301] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:24.266583577 UTC
<6>[90386.840503] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<36>[90386.840516] (2)[576:logd.auditd]type=1400 audit(1671082764.262:1622995):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90386.840620] (0)[30807:kworker/0:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90386.840635] (0)[30807:kworker/0:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90386.840644] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90386.840676] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90386.840702] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90386.840717] (0)[10823:Binder:636_2]PM: suspend exit
<3>[90386.885708] (1)[7386:kworker/1:0]typec_cc_orientation = 2
<6>[90386.943344] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90386.943421] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90386.943464] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90386.984849] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90386.993512] (1)[7386:kworker/1:0]chg_type = 0, hvdcp_type = 0
<3>[90387.045069] (1)[7386:kworker/1:0]get_connector_temp: connector_temp:324
<6>[90387.045324] (1)[7386:kworker/1:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90387.046058] (1)[7386:kworker/1:0]mt_charger_plugin plugin:0
<6>[90387.097283] (1)[7387:kworker/1:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90387.176802] (1)[7387:kworker/1:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90387.391003] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90387.391044] (3)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90387.391268] (3)[7383:kworker/u16:6]PM: ++
<7>[90387.399489] (3)[7383:kworker/u16:6]PM: --
<4>[90387.499301] done.
<5>[90387.504176] -(0)[0:swapper/0]lvts_paused = 1
<5>[90387.504257] -(0)[0:swapper/0]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90387.508565] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177631,8022,13174scp1 sleep state: 54679,23359,23359
<6>[90387.508617] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90387.508617]
<6>[90387.508641] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90387.508641]
<6>[90387.508664] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90387.508664]
<6>[90387.508686] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90387.508686]
<5>[90387.508708] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90387.508725] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90387.508762] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90387.508794] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90387.509104] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90387.509137] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:24.935431654 UTC
<6>[90387.509345] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90387.509402] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90387.509429] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90387.509453] -(7)[454:LPM-7]Freezing user space processes ...
<4>[90387.509573] -(7)[454:LPM-7]CPU7: update max cpu_capacity 953
<36>[90387.509606] (2)[576:logd.auditd]type=1400 audit(1671082764.930:1622996):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90387.510912] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90387.512503] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90387.512532] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90387.537306] (elapsed 0.027 seconds) done.
<6>[90387.537340] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90387.537359] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.009 seconds) done.
<3>[90387.593660] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90387.593717] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90387.593794] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90387.595444] (0)[7405:kworker/u16:10]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90387.595654] (3)[7383:kworker/u16:6]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90387.595876] (2)[23444:kworker/u16:7]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90387.596399] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90387.596524] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90387.596560] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90387.597424] (0)[7405:kworker/u16:10][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90387.598243] (0)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90387.598363] (3)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90387.598429] (2)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<6>[90387.599396] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90387.599420] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90387.599452] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90387.600280] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217499547000000 to 2022/12/15 05:39:33 (now = 2022/12/15 05:39:24)
<5>[90387.600399] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:34 (1)
<5>[90387.603731] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90387.604170] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90387.604208] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90387.604219] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90387.604322] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90387.604362] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90387.604409] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90387.604409]
<6>[90387.604431] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90387.604431]
<6>[90387.604453] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90387.604453]
<6>[90387.604475] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90387.604475]
<6>[90387.604591] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90387.604630] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90387.604653] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90387.605280] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90387.605363] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90387.605587] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90387.605934] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90387.606027] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90387.606454] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90387.606472] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90387.606917] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90387.607257] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,797 us
<6>[90387.608036] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90387.608305] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90387.608432] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90387.608831] (2)[10823:Binder:636_2]suspend of devices complete after 58.307
msecs
<6>[90387.614370] (2)[10823:Binder:636_2]late suspend of devices complete after
5.511 msecs
<4>[90387.614398] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90387.619106]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90387.619824] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90387.620204] (2)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90387.620988] (2)[10823:Binder:636_2]noirq suspend of devices complete after
5.919 msecs
<6>[90387.621060] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90387.621060] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90387.621060] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90387.621140] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90387.621140] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90387.621140] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90387.621140] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90387.621140] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90387.621140] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 185739, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x180000
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x5641cec4, wlk_cntcv_h = 0x292, 26M_off_pct = 5
<6>[90387.621140] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x10
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 5.668 seconds
<4>[90387.621140] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90387.621140] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90387.621140] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90387.621140] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90387.621140] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90387.621140] -(2)[0:swapper/2]Call trace:
<4>[90387.621140] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90387.621140] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90387.621140] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90387.621140] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90387.621140] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90387.621140] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90387.621140] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90387.621140] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90387.621140] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90387.621140] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90387.621140] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90387.621140] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90387.621140] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90387.621140] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90387.621140] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90387.621140] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90387.621140] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90387.621140] -(2)[0:swapper/2]---[ end trace 308173880bd0bf74 ]---
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 7618 (32k)
<4>[90387.621140] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.232/5.015/4.944/0.437/5.5012 seconds
<6>[90387.621140] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90387.621263] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90387.621304] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90387.621275] -(2)[0:swapper/2]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90387.623359] (2)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90387.624378]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90387.624710] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90387.626788] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90387.632299] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.938 msecs
<6>[90387.632612] (0)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(81)
<6>[90387.632869] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90387.632894] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90387.637878] (3)[10823:Binder:636_2]early resume of devices complete after
4.930 msecs
<5>[90387.638647] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90387.640548] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90387.640879] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90387.640917] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1424 us
<5>[90387.641598] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90387.642004] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90387.642031] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90387.642107] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90387.642140] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90387.642223] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90387.642413] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90387.642471] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90387.642494] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90387.642578] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90387.642618] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90387.643116] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90387.643144] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90387.643159] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90387.643304] (3)[10823:Binder:636_2]zcvf, no update time:35 96 avgc:0
avgc_thread
<5>[90387.643330] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90387.646315] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90387.647298] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90387.647390] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90387.647688] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90387.647722] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90387.648560] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90387.648728] (3)[30078:kworker/3:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90387.651222] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90387.652265] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90387.652645] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90387.652681] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90387.653049] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90387.655935] (2)[10823:Binder:636_2]resume of devices complete after 18.024
msecs
<3>[90387.661215] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90387.661239] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90387.661875] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90387.661896] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90387.662106] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90387.662129] (3)[1314:receiver]Restarting tasks ...
<6>[90387.668641] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90387.668735] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90387.669264] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90387.669668] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217499547000000
<4>[90387.684613] done.
<5>[90387.684643] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90387.684657] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90387.689731] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90387.691959] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177771,8088,13262scp1 sleep state: 54681,23359,23359
<6>[90387.691978] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90387.691978]
<5>[90387.691990] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90387.692129] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90387.692147] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90387.692158] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90387.692534] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90387.693415] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90387.694077] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90387.694111] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:30.792245500 UTC
<6>[90387.694279] (1)[7388:kworker/1:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:3><0x1cdc>
<6>[90387.694342] (1)[7388:kworker/1:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90387.694351] -(1)[7388:kworker/1:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90387.694357] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0300c0e] bgf wf
<6>[90387.694380] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x000000c0], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<36>[90387.694398] (2)[576:logd.auditd]type=1400 audit(1671082770.791:1622997):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90387.694409] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90387.694419] (1)[10823:Binder:636_2]PM: suspend exit
<3>[90387.736200] (1)[7387:kworker/1:2]typec_cc_orientation = 2
<6>[90387.797790] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90387.797831] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90387.797872] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90387.844115] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90387.895810] (1)[7387:kworker/1:2]chg_type = 0, hvdcp_type = 0
<3>[90387.947665] (1)[7387:kworker/1:2]get_connector_temp: connector_temp:324
<6>[90387.947947] (1)[7387:kworker/1:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90387.948192] (1)[7387:kworker/1:2]mt_charger_plugin plugin:0
<6>[90387.994091] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90387.998195] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90388.257923] (4)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90388.258182] (1)[2328:kworker/u16:1]PM: Syncing filesystems ...
<7>[90388.258288] (1)[2328:kworker/u16:1]PM: ++
<4>[90388.260641] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 676,
817, 737, 625, 317, 163, 148, 105, success counter cpu: 134, 124, 87, 93, 56, 16,
16, 2, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 223, 187,
162, 176, 97, 24, 25, 9, o: 3-7, p: , f: , t: 90388388000000, 90388388000000,
90388401269691, 90388416502155, 90388492000000, 90388572000000, 90388988000000,
90388540000000,
<7>[90388.266251] (0)[2328:kworker/u16:1]PM: --
<4>[90388.366656] done.
<6>[90388.372623] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177785,8098,13285scp1 sleep state: 54683,23359,23359
<6>[90388.372666] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90388.372666]
<6>[90388.372690] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90388.372690]
<6>[90388.372713] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90388.372713]
<6>[90388.372735] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90388.372735]
<5>[90388.372756] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90388.372774] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90388.372803] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90388.372831] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90388.373183] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90388.373218] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:31.471361808 UTC
<6>[90388.373415] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90388.373475] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90388.373504] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90388.373530] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90388.373593] (2)[576:logd.auditd]type=1400 audit(1671082771.467:1622998):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90388.375532] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90388.376387] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90388.376490] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90388.743703] (4)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3929,Cur:175,Temp:337,RM:2240,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90388.857043] (elapsed 0.483 seconds) done.
<6>[90388.857078] (4)[10823:Binder:636_2]OOM killer disabled.
<6>[90388.857088] (4)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.003 seconds) done.
<3>[90388.903313] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:323
<3>[90388.903363] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90388.903431] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90388.904764] (1)[7405:kworker/u16:10]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90388.904945] (2)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90388.905100] (1)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90388.905726] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90388.905831] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90388.905867] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90388.906833] (1)[7405:kworker/u16:10][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90388.907222] (1)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90388.907309] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90388.907328] (2)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<6>[90388.908440] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90388.908469] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90388.908497] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<3>[90388.909172] (0)[10823:Binder:636_2]dpm_run_callback():
platform_pm_suspend+0x0/0x54 returns -16
<3>[90388.909204] (0)[10823:Binder:636_2]PM: Device alarmtimer failed to suspend:
error -16
<6>[90388.909228] (0)[10823:Binder:636_2]suspend of devices aborted after 47.605
msecs
<3>[90388.909245] (0)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<6>[90388.910221] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90388.911621] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90388.911711] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90388.911980] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90388.912014] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90388.912670] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90388.912826] (2)[26031:kworker/2:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90388.914721] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90388.914994] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90388.915258] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90388.915851] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90388.916372] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90388.920892] (1)[10823:Binder:636_2]resume of devices complete after 11.621
msecs
<3>[90388.926154] (1)[7386:kworker/1:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90388.926181] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90388.926926] (1)[7386:kworker/1:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90388.926950] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90388.927163] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90388.927190] (1)[1038:mi_thermald]Restarting tasks ...
<5>[90388.933416] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90388.933469] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90388.933499] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90388.933521] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90388.934214] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90388.934237] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90388.934689] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<4>[90388.943133] done.
<5>[90388.943160] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90388.943169] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90388.948332] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90388.950996] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177802,8106,13311scp1 sleep state: 54685,23359,23359
<6>[90388.951031] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90388.951031]
<5>[90388.951044] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90388.951054] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90388.951071] -(0)[10823:Binder:636_2]Abort: Callback failed on alarmtimer in
platform_pm_suspend+0x0/0x54 returned -16
<5>[90388.951081] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90388.952175] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90388.952814] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90388.952854] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:32.050984885 UTC
<6>[90388.953011] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90388.953073] (0)[30807:kworker/0:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90388.953084] (0)[30807:kworker/0:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90388.953103] (1)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90388.953107] (1)[576:logd.auditd]type=1400 audit(1671082772.047:1622999):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90388.953124] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90388.953134] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90388.953148] (0)[10823:Binder:636_2]PM: suspend exit
<3>[90389.002536] (2)[23427:kworker/2:2]typec_cc_orientation = 2
<6>[90389.003195] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90389.109013] (2)[26031:kworker/2:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90389.156616] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90389.156659] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90389.156685] (0)[10823:Binder:636_2]active wakeup source: alarmtimer
<3>[90389.160625] (2)[23427:kworker/2:2]chg_type = 0, hvdcp_type = 0
<3>[90389.211756] (2)[23427:kworker/2:2]get_connector_temp: connector_temp:324
<6>[90389.211969] (2)[23427:kworker/2:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90389.212196] (2)[23427:kworker/2:2]mt_charger_plugin plugin:0
<6>[90389.263243] (2)[26031:kworker/2:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90389.591189] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90389.591468] (2)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<5>[90389.598912] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90389.854030] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:22%
<6>[90389.854131] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90389.854152] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90389.854162] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90389.854176] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90389.854185] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90389.854198] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33183,33542909,5450), tx=(12955,1999,10956), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90389.854277] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90389.982223] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90390.008615] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90390.009044] -(2)[1893:AlarmManager][bq27z561] fg_update_status:
SOC:59,Volt:3928,Cur:238,Temp:337,RM:2240,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90390.279774] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217505980000000
<5>[90390.280935] -(3)[1454:system_server]alarmtimer_enqueue, 217505980000000
<6>[90390.910486] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90390.910530] (1)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90390.910768] (1)[19178:kworker/u16:2]PM: ++
<7>[90390.921903] (2)[19178:kworker/u16:2]PM: --
<5>[90390.934308] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90390.934379] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90390.934430] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90390.934472] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90391.007001] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90391.016885] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90391.018104] done.
<6>[90391.024481] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177849,8131,13341scp1 sleep state: 54687,23361,23361
<6>[90391.024512] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90391.024512]
<6>[90391.024537] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90391.024537]
<6>[90391.024561] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90391.024561]
<6>[90391.024583] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90391.024583]
<5>[90391.024605] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90391.024623] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90391.024653] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90391.024694] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90391.024942] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90391.024975] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:34.123119039 UTC
<6>[90391.025144] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90391.025202] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90391.025229] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90391.025252] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90391.025421] (1)[576:logd.auditd]type=1400 audit(1671082774.119:1623000):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90391.027128] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90391.027976] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90391.028011] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90391.052719] (elapsed 0.027 seconds) done.
<6>[90391.052759] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90391.052779] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90391.108194] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90391.108244] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90391.108312] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90391.109745] (2)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90391.109923] (0)[23437:kworker/u16:3]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90391.110105] (1)[7405:kworker/u16:10]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90391.110416] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90391.110531] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90391.110567] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90391.111577] (0)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90391.112254] (0)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90391.112282] (1)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90391.112335] (2)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<6>[90391.113074] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90391.113102] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90391.113130] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90391.113879] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217505980000000 to 2022/12/15 05:39:39 (now = 2022/12/15 05:39:33)
<5>[90391.114064] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:40 (1)
<5>[90391.117582] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90391.118196] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90391.118236] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90391.118247] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90391.118354] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90391.118394] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90391.118438] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90391.118438]
<6>[90391.118461] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90391.118461]
<6>[90391.118483] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90391.118483]
<6>[90391.118505] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90391.118505]
<6>[90391.118617] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90391.118656] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90391.118680] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90391.119281] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90391.119364] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90391.119584] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90391.119926] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90391.119948] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90391.120371] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90391.120390] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90391.120813] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90391.121146] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,768 us
<6>[90391.122004] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90391.122256] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90391.122383] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90391.122792] (3)[10823:Binder:636_2]suspend of devices complete after 55.210
msecs
<6>[90391.128196] (3)[10823:Binder:636_2]late suspend of devices complete after
5.374 msecs
<4>[90391.128223] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90391.132717]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90391.133411] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90391.133747] (0)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90391.134477] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.563 msecs
<6>[90391.134558] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90391.134558] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90391.134558] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90391.134635] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90391.134635] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90391.134635] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90391.134635] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90391.134635] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90391.134635] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 28063, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x59a55953, wlk_cntcv_h = 0x292, 26M_off_pct = 1
<6>[90391.134635] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 0.856 seconds
<4>[90391.134635] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90391.134635] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90391.134635] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90391.134635] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90391.134635] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90391.134635] -(3)[0:swapper/3]Call trace:
<4>[90391.134635] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90391.134635] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90391.134635] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90391.134635] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90391.134635] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90391.134635] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90391.134635] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90391.134635] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90391.134635] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90391.134635] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90391.134635] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90391.134635] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90391.134635] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90391.134635] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90391.134635] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90391.134635] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90391.134635] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90391.134635] -(3)[0:swapper/3]---[ end trace 308173880bd0bf75 ]---
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 250 (32k)
<4>[90391.134635] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.007/1.002/0.904/0.016/1.1002 seconds
<6>[90391.134635] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90391.134758] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90391.134802] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90391.134769] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90391.136641] (0)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_resume
<5>[90391.137584]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90391.137611] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90391.139756] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90391.145387] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.695 msecs
<6>[90391.145676] (2)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(82)
<6>[90391.146055] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90391.146082] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90391.151077] (3)[10823:Binder:636_2]early resume of devices complete after
4.943 msecs
<5>[90391.151514] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90391.153489] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90391.153876] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90391.153979] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1810 us
<5>[90391.154254] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90391.154866] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90391.154893] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90391.154969] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90391.155001] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90391.155084] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90391.155271] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90391.155327] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90391.155350] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90391.155434] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90391.155475] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90391.155595] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90391.155619] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90391.155632] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90391.155775] (3)[10823:Binder:636_2]zcvf, no update time:40 96 avgc:0
avgc_thread
<5>[90391.155802] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90391.158834] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90391.159864] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90391.159954] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90391.160255] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90391.160289] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90391.160937] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90391.161080] (3)[7406:kworker/3:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90391.163183] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90391.163707] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90391.164511] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90391.164532] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90391.164617] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90391.166027] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 28063, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90391.166055] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90391.168118] (0)[10823:Binder:636_2]resume of devices complete after 17.009
msecs
<3>[90391.172609] (0)[3064:kworker/0:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90391.172635] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90391.173250] (0)[3064:kworker/0:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90391.173271] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90391.173460] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90391.173479] (2)[1316:vdec_log_info]Restarting tasks ...
<6>[90391.181223] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90391.181408] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90391.181662] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90391.183992] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217505980000000
<4>[90391.195213] done.
<5>[90391.195241] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90391.195257] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90391.197348] (2)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.197410] (2)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<5>[90391.199280] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90391.199499] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177880,8150,13380scp1 sleep state: 54689,23361,23361
<6>[90391.199519] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90391.199519]
<5>[90391.199537] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90391.199551] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90391.199573] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90391.199588] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90391.200796] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90391.201004] -(2)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90391.201531] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90391.201573] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:35.159685806 UTC
<6>[90391.201772] (0)[3064:kworker/0:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:0><0xbf8>
<36>[90391.201787] (1)[576:logd.auditd]type=1400 audit(1671082775.152:1623001):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90391.201996] (0)[3064:kworker/0:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90391.202014] (0)[3064:kworker/0:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90391.202051] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90391.202073] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90391.202166] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90391.202207] (0)[853:[email protected]]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<12>[90391.208406] (0)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.214282] (0)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.214339] (0)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.222212] (0)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.227834] (0)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.227893] (0)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.234215] (0)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<12>[90391.240741] (3)[853:[email protected]]healthd: battery l=59 v=3926 t=33.7 h=2
st=3 c=234 fc=4110000 cc=670 chg=
<6>[90391.304926] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90391.306379] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90391.306397] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90391.306601] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90391.384913] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90391.437551] (3)[7406:kworker/3:2]typec_cc_orientation = 2
<3>[90391.588219] (3)[7406:kworker/3:2]chg_type = 0, hvdcp_type = 0
<3>[90391.641727] (3)[7406:kworker/3:2]get_connector_temp: connector_temp:324
<6>[90391.641795] (3)[7406:kworker/3:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90391.641861] (3)[7406:kworker/3:2]mt_charger_plugin plugin:0
<4>[90391.646589] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90391.646623] -(4)[7032:kworker/4:0]active wake lock :
NETLINK,last_time:90391772
<4>[90391.646663] -(4)[7032:kworker/4:0]active wake lock :
ccci_fs,last_time:90391271
<6>[90391.775367] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90391.775411] (3)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90391.775616] (3)[7383:kworker/u16:6]PM: ++
<7>[90391.782202] (3)[7383:kworker/u16:6]PM: --
<4>[90391.883160] done.
<5>[90391.890682] -(0)[0:swapper/0]lvts_paused = 1
<6>[90391.891855] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177896,8161,13399scp1 sleep state: 54691,23361,23361
<6>[90391.891886] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90391.891886]
<6>[90391.891910] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90391.891910]
<6>[90391.891934] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90391.891934]
<6>[90391.891955] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90391.891955]
<5>[90391.891976] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90391.891994] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90391.892030] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90391.892058] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90391.892352] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90391.892385] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:35.850510037 UTC
<6>[90391.892574] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90391.892631] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90391.892659] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90391.892682] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90391.892803] (1)[576:logd.auditd]type=1400 audit(1671082775.848:1623002):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90391.894473] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90391.895644] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90391.895682] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90391.920698] (elapsed 0.027 seconds) done.
<6>[90391.920738] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90391.920758] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90391.973677] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90391.973727] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90391.973988] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: ccci_fs
<6>[90391.974019] (0)[10823:Binder:636_2]suspend of devices aborted after 38.579
msecs
<3>[90391.974038] (0)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<6>[90391.975005] (0)[10823:Binder:636_2]resume of devices complete after 0.942
msecs
<3>[90391.981224] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90391.981252] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90391.981375] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90391.981405] (0)[30807:kworker/0:5]Restarting tasks ...
<3>[90391.982184] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90391.982222] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90391.989595] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90391.989681] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90391.990364] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90392.007055] done.
<5>[90392.007090] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90392.007111] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90392.010928] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90392.012559] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177901,8168,13420scp1 sleep state: 54693,23361,23361
<6>[90392.012592] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90392.012592]
<5>[90392.012615] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90392.012632] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90392.012656] -(2)[10823:Binder:636_2]Abort: Pending Wakeup Sources: ccci_fs
<5>[90392.012675] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90392.013676] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90392.014775] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90392.014826] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:35.972935960 UTC
<6>[90392.015056] (2)[26031:kworker/2:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:5><0x65af>
<36>[90392.015192] (1)[576:logd.auditd]type=1400 audit(1671082775.968:1623003):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90392.015288] (2)[26031:kworker/2:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90392.015312] (2)[26031:kworker/2:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90392.015463] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90392.015493] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90392.015511] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90392.015542] (1)[915:HwBinder:896_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90392.031458] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90392.217909] (2)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90392.316000] -(2)[0:swapper/2][bq27z561] fg_update_status:
SOC:59,Volt:3927,Cur:267,Temp:337,RM:2240,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90392.480832] -(2)[0:swapper/2]lvts_paused = 1
<5>[90392.480914] -(2)[0:swapper/2]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90392.574363] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90392.574403] (2)[25368:kworker/u16:9]PM: Syncing filesystems ...
<7>[90392.574516] (2)[25368:kworker/u16:9]PM: ++
<7>[90392.582783] (2)[25368:kworker/u16:9]PM: --
<4>[90392.682151] done.
<5>[90392.704437] -(2)[0:swapper/2]lvts_paused = 1
<6>[90392.704966] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10177915,8178,13443scp1 sleep state: 54695,23361,23361
<6>[90392.704996] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90392.704996]
<6>[90392.705021] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90392.705021]
<6>[90392.705044] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90392.705044]
<6>[90392.705066] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90392.705066]
<5>[90392.705087] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90392.705105] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90392.705137] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90392.705166] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90392.705477] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90392.705509] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:36.663634037 UTC
<6>[90392.705703] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90392.705760] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90392.705787] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90392.705811] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90392.706086] (1)[576:logd.auditd]type=1400 audit(1671082776.656:1623004):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90392.707204] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90392.708821] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90392.708849] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90392.733759] (elapsed 0.027 seconds) done.
<6>[90392.733795] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90392.733813] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90392.791411] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90392.791459] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90392.791526] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90392.792931] (2)[25368:kworker/u16:9]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90392.793112] (3)[7383:kworker/u16:6]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90392.793185] (0)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90392.793664] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90392.793777] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90392.793812] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90392.794774] (0)[23443:kworker/u16:5][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90392.795471] (0)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90392.795488] (2)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90392.795500] (3)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90392.796339] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90392.796366] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90392.796395] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90392.797149] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217505980000000 to 2022/12/15 05:39:40 (now = 2022/12/15 05:39:36)
<5>[90392.797312] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:41 (1)
<5>[90392.800787] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90392.801199] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90392.801236] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90392.801247] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90392.801352] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90392.801394] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90392.801438] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90392.801438]
<6>[90392.801461] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90392.801461]
<6>[90392.801483] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90392.801483]
<6>[90392.801505] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90392.801505]
<6>[90392.801616] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90392.801657] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90392.801681] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90392.802349] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90392.802433] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90392.802658] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90392.802997] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90392.803019] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90392.803438] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90392.803457] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90392.803878] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90392.804205] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,761 us
<6>[90392.805033] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90392.805293] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90392.805414] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90392.805822] (3)[10823:Binder:636_2]suspend of devices complete after 57.403
msecs
<6>[90392.811419] (3)[10823:Binder:636_2]late suspend of devices complete after
5.567 msecs
<4>[90392.811447] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90392.816177]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90392.816964] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90392.817314] (1)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90392.818035] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.755 msecs
<6>[90392.818112] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90392.818112] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90392.818112] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90392.818187] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90392.818187] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90392.818187] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90392.818187] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90392.818187] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90392.818187] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 147251, r13 = 0xc40009ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a6767ff, req_sta = 0x1c000df 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x5e6f6ddf, wlk_cntcv_h = 0x292, 26M_off_pct =
36
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 4.493 seconds
<4>[90392.818187] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90392.818187] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90392.818187] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90392.818187] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90392.818187] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90392.818187] -(3)[0:swapper/3]Call trace:
<4>[90392.818187] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90392.818187] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90392.818187] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90392.818187] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90392.818187] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90392.818187] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90392.818187] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90392.818187] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90392.818187] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90392.818187] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90392.818187] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90392.818187] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90392.818187] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90392.818187] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90392.818187] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90392.818187] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90392.818187] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90392.818187] -(3)[0:swapper/3]---[ end trace 308173880bd0bf76 ]---
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 56060 (32k)
<4>[90392.818187] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 1.710/4.796/5.038/2.113/5.5116 seconds
<6>[90392.818187] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90392.818187] -(3)[0:swapper/3]EINT 222 is pending
<6>[90392.818314] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90392.818358] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90392.818329] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90392.819969] (1)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90392.821150]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90392.821176] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90392.823441] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90392.828963] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.884 msecs
<6>[90392.829200] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90392.829323] -(1)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90392.829419] -(1)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90392.829463] (1)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90392.829605] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90392.829631] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90392.835062] (2)[10823:Binder:636_2]early resume of devices complete after
5.374 msecs
<5>[90392.835423] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90392.837493] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90392.837809] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90392.837847] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1523 us
<5>[90392.838273] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90392.838801] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90392.838827] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90392.838903] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90392.838935] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90392.839019] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90392.839208] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90392.839267] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90392.839291] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90392.839375] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90392.839416] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90392.840381] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90392.840409] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90392.840424] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90392.840570] (2)[10823:Binder:636_2]zcvf, no update time:46 96 avgc:0
avgc_thread
<5>[90392.840597] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90392.843412] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90392.844496] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90392.844588] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90392.844870] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90392.844904] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90392.845576] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90392.845714] (2)[7519:kworker/2:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90392.847621] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90392.848221] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90392.848863] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90392.849883] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<3>[90392.850326] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90392.852185] (1)[10823:Binder:636_2]resume of devices complete after 17.089
msecs
<3>[90392.856325] (1)[7386:kworker/1:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90392.856355] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90392.857086] (1)[7386:kworker/1:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90392.857110] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90392.857319] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90392.857340] (2)[1315:receiver]Restarting tasks ...
<6>[90392.864345] (2)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90392.864655] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90392.865401] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90392.876218] done.
<5>[90392.876257] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90392.876272] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90392.882349] (3)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90392.882787] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178026,8234,13516scp1 sleep state: 54697,23361,23361
<6>[90392.882813] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90392.882813]
<5>[90392.882831] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90392.882846] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90392.882870] -(3)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90392.882889] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90392.883867] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90392.884356] -(4)[406:EEMG_CTRL_GPU][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90392.884555] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90392.884594] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:41.340075653 UTC
<6>[90392.884788] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<36>[90392.885043] (3)[576:logd.auditd]type=1400 audit(1671082781.333:1623005):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90392.885425] (3)[7406:kworker/3:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90392.885440] (3)[7406:kworker/3:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90392.885455] (3)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90392.885476] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90392.885501] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90392.885519] (3)[10823:Binder:636_2]PM: suspend exit
<5>[90392.890607] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217536998000000
<3>[90392.909476] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90392.916407] -(1)[5444:Binder:1454_19]alarmtimer_enqueue, 217512545000000
<5>[90392.926204] -(6)[3662:WifiScanningSer]alarmtimer_enqueue, 217512545000000
<5>[90392.934148] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90392.934594] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90392.934639] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90392.934670] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90392.934694] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<3>[90392.937291] (2)[7519:kworker/2:4]typec_cc_orientation = 2
<6>[90392.987358] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90392.987411] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90392.987461] (3)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90393.036687] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90393.041720] (2)[30082:kworker/2:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90393.093694] (2)[7519:kworker/2:4]chg_type = 0, hvdcp_type = 0
<6>[90393.146164] (2)[30082:kworker/2:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90393.197655] (2)[7519:kworker/2:4]get_connector_temp: connector_temp:324
<6>[90393.197965] (2)[7519:kworker/2:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90393.198042] (2)[7519:kworker/2:4]mt_charger_plugin plugin:0
<4>[90393.262139] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 597,
555, 529, 559, 268, 203, 163, 112, success counter cpu: 109, 109, 80, 107, 34, 28,
6, 11, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 209, 189,
161, 170, 62, 63, 38, 27, o: 0,2-7, p: , f: 1, t: 90393389896155, 90393388000000,
90393407583692, 90393483432847, 90393564000000, 90393532000000, 90393514587616,
90393596000000,
<6>[90393.886462] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90393.956100] (3)[915:HwBinder:896_2][bq27z561] fg_update_status:
SOC:59,Volt:3922,Cur:190,Temp:337,RM:2240,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90394.045773] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90394.230280] -(1)[3662:WifiScanningSer]alarmtimer_enqueue, 217512545000000
<5>[90394.330508] -(1)[1867:Binder:1454_3]alarmtimer_enqueue, 217536998000000
<5>[90394.331230] -(1)[1867:Binder:1454_3]alarmtimer_enqueue, 217536998000000
<5>[90394.847360] -(0)[0:swapper/0]lvts_paused = 1
<5>[90394.858223] (1)[7386:kworker/1:0]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<5>[90394.858575] (1)[7387:kworker/1:2]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<5>[90394.858694] (1)[7388:kworker/1:3]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<3>[90394.860447] (1)[7387:kworker/1:2]ghr: scsi_execute exit ret = 0x0
<3>[90394.860507] (1)[7388:kworker/1:3]ghr: scsi_execute exit ret = 0x0
<3>[90394.860532] (1)[7386:kworker/1:0]ghr: scsi_execute exit ret = 0x0
<6>[90394.860556] (1)[7386:kworker/1:0]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90394.860562] (1)[7386:kworker/1:0]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90394.860788] (1)[7386:kworker/1:0]ufshcd bootdevice: rs,ret 0,228 us
<6>[90394.911179] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<5>[90394.935371] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90394.935452] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90394.935503] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90394.935545] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90395.055687] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90395.934358] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90396.063936] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90396.333107] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90396.346089] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 147251, r13 = 0xc40009ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a6767ff, req_sta = 0x1c000df 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90396.346193] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<5>[90396.431889] -(3)[1867:Binder:1454_3]alarmtimer_enqueue, 217516061000000
<6>[90396.434757] (3)[10823:Binder:636_2]last active wakeup source: eventpoll
<6>[90396.535296] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90396.535340] (2)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90396.535616] (2)[19178:kworker/u16:2]PM: ++
<6>[90396.539670] (0)[30807:kworker/0:5]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90396.539714] (0)[30807:kworker/0:5]ufshcd bootdevice: rr,ret 0,2089 us
<7>[90396.545876] (2)[19178:kworker/u16:2]PM: --
<4>[90396.642105] done.
<6>[90396.648635] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178278,8457,13764scp1 sleep state: 54699,23361,23361
<6>[90396.648668] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90396.648668]
<6>[90396.648693] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90396.648693]
<6>[90396.648716] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90396.648716]
<6>[90396.648738] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90396.648738]
<5>[90396.648761] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90396.648780] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90396.648820] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90396.648851] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90396.649234] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90396.649269] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:45.104762730 UTC
<6>[90396.649465] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90396.649523] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90396.649551] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90396.649575] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90396.649993] (1)[576:logd.auditd]type=1400 audit(1671082785.097:1623006):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90396.651841] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90396.652829] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90396.652874] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90396.680128] (elapsed 0.030 seconds) done.
<6>[90396.680172] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90396.680193] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90396.741341] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90396.741398] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90396.741476] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90396.743127] (2)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90396.743830] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90396.743958] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90396.743995] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90396.744935] (2)[19178:kworker/u16:2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90396.745576] (2)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<6>[90396.746724] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90396.746754] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90396.746785] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90396.747638] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217516061000000 to 2022/12/15 05:39:49 (now = 2022/12/15 05:39:44)
<5>[90396.747758] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:50 (1)
<5>[90396.751212] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90396.751640] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90396.751680] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90396.751692] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90396.751811] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90396.751856] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90396.751905] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90396.751905]
<6>[90396.751929] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90396.751929]
<6>[90396.751951] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90396.751951]
<6>[90396.751973] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90396.751973]
<6>[90396.752097] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90396.752142] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90396.752167] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90396.752883] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90396.752972] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90396.753209] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90396.753595] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90396.753618] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90396.754143] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90396.754165] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90396.754618] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90396.754961] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,814 us
<6>[90396.755976] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90396.756275] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90396.756410] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90396.756846] (3)[10823:Binder:636_2]suspend of devices complete after 59.826
msecs
<6>[90396.764094] (3)[10823:Binder:636_2]late suspend of devices complete after
7.217 msecs
<4>[90396.764124] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90396.770177]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90396.770829] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90396.771215] (3)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90396.772031] (3)[10823:Binder:636_2]noirq suspend of devices complete after
7.142 msecs
<6>[90396.772105] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90396.772105] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90396.772105] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90396.772190] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90396.772190] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90396.772190] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 39881, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767f9, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x6271e2ac, wlk_cntcv_h = 0x292, 26M_off_pct =
59
<6>[90396.772190] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 1.217 seconds
<4>[90396.772190] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90396.772190] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90396.772190] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90396.772190] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90396.772190] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90396.772190] -(3)[0:swapper/3]Call trace:
<4>[90396.772190] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90396.772190] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90396.772190] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90396.772190] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90396.772190] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90396.772190] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90396.772190] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90396.772190] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90396.772190] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90396.772190] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90396.772190] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90396.772190] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90396.772190] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90396.772190] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90396.772190] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90396.772190] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90396.772190] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90396.772190] -(3)[0:swapper/3]---[ end trace 308173880bd0bf77 ]---
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 24780 (32k)
<4>[90396.772190] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.756/1.409/1.409/0.756/1.1409 seconds
<6>[90396.772190] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90396.772314] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90396.772358] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90396.772327] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90396.774209] (3)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_resume
<5>[90396.775618]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90396.775644] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90396.777627] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90396.783161] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.056 msecs
<6>[90396.783432] (0)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(83)
<6>[90396.783763] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90396.783790] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90396.788527] (1)[10823:Binder:636_2]early resume of devices complete after
4.683 msecs
<5>[90396.788963] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90396.790944] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90396.791253] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90396.791291] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1535 us
<5>[90396.791563] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90396.792183] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90396.792211] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90396.792285] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90396.792317] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90396.792400] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90396.792590] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90396.792647] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90396.792670] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90396.792750] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90396.792791] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90396.792910] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90396.792935] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90396.792948] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90396.793101] (1)[10823:Binder:636_2]zcvf, no update time:51 96 avgc:0
avgc_thread
<5>[90396.793128] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90396.796291] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90396.797312] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90396.797402] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90396.797683] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90396.797717] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90396.798502] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90396.798643] (1)[7387:kworker/1:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90396.800876] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90396.801374] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90396.802228] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90396.802890] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90396.802989] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90396.805745] (3)[10823:Binder:636_2]resume of devices complete after 17.186
msecs
<6>[90396.810198] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90396.810222] (3)[30078:kworker/3:3]Restarting tasks ...
<3>[90396.810468] (3)[30078:kworker/3:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90396.810503] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90396.811175] (3)[30078:kworker/3:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90396.811197] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90396.817436] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90396.817659] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90396.818076] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90396.818553] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217516061000000
<12>[90396.833134] (3)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<4>[90396.833177] done.
<5>[90396.833201] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<12>[90396.833208] (3)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<5>[90396.833233] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90396.837069] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90396.838020] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178314,8476,13802scp1 sleep state: 54701,23361,23361
<6>[90396.838039] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90396.838039]
<5>[90396.838051] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90396.838062] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90396.838079] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90396.838091] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90396.838772] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90396.839125] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90396.840068] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90396.840118] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:46.516226422 UTC
<6>[90396.840336] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90396.840464] (0)[30807:kworker/0:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90396.840482] (0)[30807:kworker/0:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90396.840527] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90396.840553] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90396.840574] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90396.840645] (0)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90396.840970] (0)[576:logd.auditd]type=1400 audit(1671082786.512:1623007):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<12>[90396.845324] (3)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<12>[90396.858879] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<12>[90396.858954] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<12>[90396.862983] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<12>[90396.867335] (4)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<12>[90396.867380] (4)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<12>[90396.871302] (4)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<12>[90396.876006] (4)[853:[email protected]]healthd: battery l=59 v=3936 t=33.7 h=2
st=3 c=44 fc=4110000 cc=670 chg=
<3>[90396.886541] (1)[7387:kworker/1:2]typec_cc_orientation = 2
<5>[90396.935972] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90396.936048] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90396.936099] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90396.936168] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90396.942300] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90396.942334] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90396.942371] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<3>[90396.994974] (1)[7387:kworker/1:2]chg_type = 0, hvdcp_type = 0
<3>[90397.046933] (1)[7387:kworker/1:2]get_connector_temp: connector_temp:324
<6>[90397.046985] (1)[7387:kworker/1:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90397.047046] (1)[7387:kworker/1:2]mt_charger_plugin plugin:0
<6>[90397.071990] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90397.098847] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90397.201821] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90397.407174] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90397.407213] (1)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90397.407449] (1)[23443:kworker/u16:5]PM: ++
<7>[90397.415701] (1)[23443:kworker/u16:5]PM: --
<4>[90397.514176] done.
<5>[90397.520126] -(2)[0:swapper/2]lvts_paused = 1
<6>[90397.523697] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178332,8488,13824scp1 sleep state: 54703,23361,23361
<6>[90397.523756] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90397.523756]
<6>[90397.523781] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90397.523781]
<6>[90397.523803] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90397.523803]
<6>[90397.523825] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90397.523825]
<5>[90397.523848] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90397.523866] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90397.523906] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90397.523951] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90397.524307] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90397.524342] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:47.200466960 UTC
<6>[90397.524561] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90397.524619] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90397.524647] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90397.524673] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90397.524908] (1)[576:logd.auditd]type=1400 audit(1671082787.196:1623008):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90397.526303] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90397.527894] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90397.527922] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90397.554765] (elapsed 0.030 seconds) done.
<6>[90397.554808] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90397.554830] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90397.614213] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90397.614268] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90397.614345] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90397.615904] (2)[2328:kworker/u16:1]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90397.616157] (1)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90397.616305] (3)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90397.616697] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90397.616875] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90397.616911] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90397.617781] (2)[2328:kworker/u16:1][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90397.618384] (2)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90397.618539] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90397.618592] (3)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90397.619713] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90397.619739] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90397.619771] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90397.620584] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217516061000000 to 2022/12/15 05:39:50 (now = 2022/12/15 05:39:47)
<5>[90397.620705] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:39:51 (1)
<5>[90397.624598] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90397.625048] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90397.625088] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90397.625099] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90397.625218] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90397.625264] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90397.625315] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90397.625315]
<6>[90397.625338] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90397.625338]
<6>[90397.625360] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90397.625360]
<6>[90397.625382] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90397.625382]
<6>[90397.625509] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90397.625557] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90397.625582] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90397.626322] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90397.626411] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90397.626651] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90397.627028] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90397.627051] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90397.627523] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90397.627542] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90397.627973] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90397.628311] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,782 us
<6>[90397.629231] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90397.629683] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90397.629821] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90397.630329] (1)[10823:Binder:636_2]suspend of devices complete after 58.409
msecs
<6>[90397.636493] (1)[10823:Binder:636_2]late suspend of devices complete after
6.130 msecs
<4>[90397.636522] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90397.642814]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90397.643467] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90397.643848] (1)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90397.644670] (1)[10823:Binder:636_2]noirq suspend of devices complete after
7.233 msecs
<6>[90397.644743] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90397.644743] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90397.644743] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<5>[90397.644830] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90397.644830] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90397.644830] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 62296, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x6498cb37, wlk_cntcv_h = 0x292, 26M_off_pct =
60
<6>[90397.644830] -(1)[0:swapper/1][ccci1/WK]CCIF RX bitmap:0x10
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 1.901 seconds
<4>[90397.644830] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90397.644830] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90397.644830] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90397.644830] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90397.644830] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90397.644830] -(1)[0:swapper/1]Call trace:
<4>[90397.644830] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90397.644830] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90397.644830] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90397.644830] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90397.644830] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90397.644830] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90397.644830] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90397.644830] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90397.644830] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90397.644830] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90397.644830] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90397.644830] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90397.644830] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90397.644830] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90397.644830] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90397.644830] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90397.644830] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90397.644830] -(1)[0:swapper/1]---[ end trace 308173880bd0bf78 ]---
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 36225 (32k)
<4>[90397.644830] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 1.105/1.105/1.544/1.381/1.1544 seconds
<6>[90397.644830] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90397.644954] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90397.644997] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90397.644964] -(1)[0:swapper/1]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90397.647275] (2)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_resume
<5>[90397.648277]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90397.648303] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90397.650379] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90397.655837] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.053 msecs
<6>[90397.656239] (3)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(84)
<6>[90397.656329] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90397.656351] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90397.661164] (1)[10823:Binder:636_2]early resume of devices complete after
4.762 msecs
<5>[90397.661529] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90397.663421] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90397.663737] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90397.663774] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1502 us
<5>[90397.664044] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90397.664384] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90397.664410] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90397.664484] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90397.664516] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90397.664598] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90397.664787] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90397.664841] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90397.664863] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90397.664945] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90397.664985] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90397.665106] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90397.665131] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90397.665145] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90397.665287] (1)[10823:Binder:636_2]zcvf, no update time:54 96 avgc:0
avgc_thread
<5>[90397.665313] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90397.668271] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90397.669274] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90397.669364] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90397.669678] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90397.669713] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90397.670621] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90397.670781] (1)[25366:kworker/1:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90397.672808] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90397.673126] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90397.673412] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90397.674238] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90397.674368] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90397.677081] (3)[10823:Binder:636_2]resume of devices complete after 15.884
msecs
<3>[90397.680452] (3)[2356:kworker/3:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90397.680486] (3)[2356:kworker/3:5][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90397.681073] (3)[2356:kworker/3:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90397.681094] (3)[2356:kworker/3:5][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90397.681271] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90397.681288] (5)[1314:receiver]Restarting tasks ...
<6>[90397.688949] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90397.689775] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90397.689788] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217516061000000
<6>[90397.689914] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90397.702388] done.
<5>[90397.702413] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90397.702425] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90397.705338] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178380,8512,13870scp1 sleep state: 54705,23361,23361
<6>[90397.705357] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90397.705357]
<5>[90397.705366] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90397.705372] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90397.705385] -(3)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90397.705394] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90397.706043] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90397.706243] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90397.706548] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90397.707431] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90397.707469] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:49.288201806 UTC
<6>[90397.707657] (3)[2356:kworker/3:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:5><0x934>
<6>[90397.707732] (3)[2356:kworker/3:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90397.707745] (3)[2356:kworker/3:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<36>[90397.707818] (1)[576:logd.auditd]type=1400 audit(1671082789.285:1623009):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90397.707828] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90397.707840] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90397.707852] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90397.707916] (1)[7390:kworker/1:5]conninfra@(consys_power_state:443)
[consys_power_state] [0x2030000e] bgf wf
<3>[90397.758774] (1)[7390:kworker/1:5]typec_cc_orientation = 2
<6>[90397.809097] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90397.809137] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90397.809179] (3)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90397.869098] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90397.918180] (1)[7390:kworker/1:5]chg_type = 0, hvdcp_type = 0
<6>[90397.977051] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90398.078818] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90398.131817] (1)[7390:kworker/1:5]get_connector_temp: connector_temp:324
<6>[90398.131883] (1)[7390:kworker/1:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90398.131948] (1)[7390:kworker/1:5]mt_charger_plugin plugin:0
<4>[90398.265345] -(4)[0:swapper/4][name:bc&]tick broadcast enter counter cpu: 749,
736, 592, 633, 178, 79, 74, 39, success counter cpu: 177, 146, 108, 123, 16, 12, 9,
0, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 277, 243, 182,
196, 45, 14, 21, 2, o: 0-3,5-7, p: , f: , t: 90398428000000, 90398388000000,
90398388000000, 90398402728078, 90398430964898, 90398588000000, 90398745106308,
90398556000000,
<6>[90398.302229] (0)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90398.302244] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90398.302265] (1)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90398.302510] (1)[7608:kworker/u16:11]PM: ++
<6>[90398.305093] -(3)[2251:kworker/u17:4][ccci1/fsm]received MD status response
97600043
<6>[90398.305603] (1)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<7>[90398.311526] (1)[7608:kworker/u16:11]PM: --
<4>[90398.410159] done.
<6>[90398.418574] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178397,8522,13887scp1 sleep state: 54707,23362,23362
<6>[90398.418631] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90398.418631]
<6>[90398.418655] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90398.418655]
<6>[90398.418679] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90398.418679]
<6>[90398.418701] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90398.418701]
<5>[90398.418723] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90398.418742] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90398.418781] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90398.418811] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90398.419160] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90398.419195] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:49.999936498 UTC
<6>[90398.419391] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90398.419448] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90398.419476] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90398.419501] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90398.419723] (2)[576:logd.auditd]type=1400 audit(1671082789.997:1623010):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90398.420855] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90398.422494] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90398.422523] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90398.443389] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_poll
<3>[90398.443431] (3)[10823:Binder:636_2]Freezing of tasks aborted after 0.023
seconds
<6>[90398.443454] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90398.443469] (2)[1314:receiver]Restarting tasks ...
<6>[90398.449841] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90398.450102] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90398.450981] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90398.466976] done.
<5>[90398.467014] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90398.467035] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90398.470937] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90398.471881] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178399,8523,13899scp1 sleep state: 54709,23362,23362
<6>[90398.471912] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90398.471912]
<5>[90398.471937] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90398.471956] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90398.471983] -(3)[10823:Binder:636_2]Abort: Pending Wakeup Sources: [timerfd]
ccci_poll
<5>[90398.472004] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90398.473143] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90398.474392] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90398.474446] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:50.055171960 UTC
<6>[90398.474683] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<36>[90398.474695] (2)[576:logd.auditd]type=1400 audit(1671082790.053:1623011):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90398.474946] (3)[7406:kworker/3:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90398.474968] (3)[7406:kworker/3:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90398.475020] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90398.475049] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90398.475075] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90398.475281] -(2)[1893:AlarmManager]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<5>[90398.486888] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217536998000000
<3>[90398.492020] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90398.545603] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x4,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398545572857,15000000]
<6>[90398.545670] (2)[433:wdtk-2][thread:433][RT:90398545653549] 2022-12-15
05:39:50.126403 UTC;android time 2022-12-15 12:39:50.126403
<5>[90398.597682] -(0)[0:swapper/0]lvts_paused = 1
<6>[90398.610102] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x6,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398610080319,14935492]
<6>[90398.619332] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0x86,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398619319011,14926253]
<6>[90398.619466] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0x8e,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398619445473,14926127]
<6>[90398.619518] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x9e,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398619506088,14926066]
<6>[90398.619573] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0xbe,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398619562473,14926010]
<6>[90398.619641] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0xbf,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398619622473,14925950]
<6>[90398.619650] (6)[437:wdtk-6][wdk-k]
cpu=6,lbit=0xff,cbit=0xff,7,1,2667932697,90398419181549,90398474417242,
[90398619637165,14925935]
<6>[90398.679331] (2)[10823:Binder:636_2]active wakeup source: ccci_poll
<6>[90398.783926] (1)[7388:kworker/1:3][bq27z561] fg_update_status:
SOC:59,Volt:3935,Cur:91,Temp:338,RM:2240,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90398.784106] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90398.785100] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90398.785584] (1)[118:pd_dbg_info]///PD dbg info 128d
<5>[90398.785606] (1)[118:pd_dbg_info]<90398.785>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90398.785606] <90398.785>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90398.795116] (1)[7390:kworker/1:5]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<5>[90398.937746] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90398.938395] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90398.938471] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90398.938523] (1)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90398.938565] (1)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90399.088520] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90399.489680] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<5>[90399.678410] (3)[7406:kworker/3:2]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90399.678903] (3)[2356:kworker/3:5]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<3>[90399.680563] (3)[7406:kworker/3:2]ghr: scsi_execute exit ret = 0x0
<3>[90399.680624] (3)[2356:kworker/3:5]ghr: scsi_execute exit ret = 0x0
<6>[90399.689927] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90399.690037] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90399.690134] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90399.690186] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<5>[90399.823377] -(3)[0:swapper/3]lvts_paused = 1
<5>[90399.823468] -(3)[0:swapper/3]Cnt= 10 LVTS TC 6, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<5>[90399.838218] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<5>[90400.018562] (1)[347:battery_thread]
[fgauge_read_boot_battery_plug_out_status] rtc_invalid 1 plugout 1
bat_plug_out_time 31 sp3:0x0 pl:0 0
<6>[90400.021564] (1)[347:battery_thread]mt635x-auxadc mt635x-auxadc: name:BATADC,
channel=0, adc_out=0x4ff4, adc_result=3935
<5>[90400.063317] (1)[347:battery_thread]lbat 0 0 0 0
<5>[90400.063382] (1)[347:battery_thread]car[0,0,0,0,0, cycle_car:0,ncar:0] c:0
58000 vbat:3935 vbus:0 soc:-1 50 gm3:1 0 0 0
<5>[90400.063438] (1)[347:battery_thread]tmp:33 65535 65535 hcar2:65535
lcar2:65535 time:217517 sw_iavg:0 0 0 nafg_m:0 0 0
<6>[90400.097476] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:34%
<6>[90400.097546] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90400.097568] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90400.097578] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90400.097592] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90400.097602] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90400.097615] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33183,33542909,5450), tx=(12955,1999,10956), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90400.097698] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90400.098352] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90400.302438] (2)[347:battery_thread]GM3log-nint-nafg 217517 90400 0 0 0 0 0
<5>[90400.302485] (2)[347:battery_thread]FG daemon is disabled
<6>[90400.511132] (3)[2356:kworker/3:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:5><0x934>
<6>[90400.865216] (0)[0:swapper/0][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<5>[90400.939127] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90400.939227] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90400.939280] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90400.939323] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90401.109721] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90401.474063] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 62296, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90401.474248] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90401.535661] (3)[2356:kworker/3:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:5><0x934>
<5>[90401.662233] (3)[2356:kworker/3:5]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90401.664470] (3)[2356:kworker/3:5]ghr: scsi_execute exit ret = 0x0
<6>[90401.664541] (3)[2356:kworker/3:5]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90401.664561] (3)[2356:kworker/3:5]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90401.664799] (3)[2356:kworker/3:5]ufshcd bootdevice: rs,ret 0,258 us
<4>[90401.887085] (4)[7032:kworker/4:0]power_debug_work: start
<3>[90401.916206] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90402.050039] -(0)[5449:Binder:1454_1C]alarmtimer_enqueue, 217536998000000
<6>[90402.070872] (6)[30505:kworker/6:1]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90402.070910] (6)[30505:kworker/6:1]ufshcd bootdevice: rr,ret 0,1866 us
<5>[90402.083830] -(5)[4944:Binder:1454_13]alarmtimer_enqueue, 217536998000000
<6>[90402.086449] (4)[10823:Binder:636_2]last active wakeup source: ttyC0
<6>[90402.118732] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90402.143587] -(3)[0:swapper/3]lvts_paused = 1
<6>[90402.287068] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90402.287110] (3)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90402.287370] (3)[7608:kworker/u16:11]PM: ++
<7>[90402.297171] (3)[7608:kworker/u16:11]PM: --
<4>[90402.395218] done.
<6>[90402.401162] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178630,8738,14139scp1 sleep state: 54711,23366,23366
<6>[90402.401194] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90402.401194]
<6>[90402.401219] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90402.401219]
<6>[90402.401243] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90402.401243]
<6>[90402.401264] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90402.401264]
<5>[90402.401286] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90402.401304] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90402.401335] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90402.401363] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<36>[90402.402040] (2)[576:logd.auditd]type=1400 audit(1671082793.977:1623012):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90402.402207] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90402.402247] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:53.982990037 UTC
<6>[90402.402421] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90402.402479] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90402.402506] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90402.402528] (0)[613:teei_daemon]Freezing user space processes ...
<5>[90402.404220] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90402.405329] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90402.405357] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90402.424983] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: ccci_fs
<3>[90402.425020] (3)[10823:Binder:636_2]Freezing of tasks aborted after 0.022
seconds
<6>[90402.425041] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90402.425057] (2)[1314:receiver]Restarting tasks ...
<6>[90402.431121] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90402.431770] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90402.431782] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90402.446768] done.
<5>[90402.446800] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90402.446819] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90402.451191] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90402.452097] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178633,8742,14156scp1 sleep state: 54713,23366,23366
<6>[90402.452127] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90402.452127]
<5>[90402.452151] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90402.452168] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90402.452192] -(3)[10823:Binder:636_2]Abort: Pending Wakeup Sources: ccci_fs
<5>[90402.452211] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90402.453314] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90402.454470] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90402.454518] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:54.035247652 UTC
<36>[90402.454730] (2)[576:logd.auditd]type=1400 audit(1671082794.033:1623013):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90402.454777] (3)[2356:kworker/3:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:5><0x934>
<6>[90402.454879] (3)[2356:kworker/3:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90402.454904] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90402.454926] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90402.454941] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90402.454957] (3)[2356:kworker/3:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90402.455107] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90402.857721] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<5>[90402.941700] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90402.941803] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90402.941856] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90402.941984] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90403.006408] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90403.006459] (3)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90403.006586] (3)[7608:kworker/u16:11]PM: ++
<7>[90403.014475] (3)[7608:kworker/u16:11]PM: --
<4>[90403.115779] done.
<6>[90403.121807] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178649,8748,14172scp1 sleep state: 54715,23366,23366
<6>[90403.121839] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90403.121839]
<6>[90403.121940] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90403.121940]
<6>[90403.121966] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90403.121966]
<6>[90403.121988] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90403.121988]
<5>[90403.122010] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90403.122028] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90403.122059] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90403.122087] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90403.122375] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90403.122408] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:54.703150652 UTC
<6>[90403.122599] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90403.122656] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90403.122683] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90403.122705] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90403.122906] (2)[576:logd.auditd]type=1400 audit(1671082794.701:1623014):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90403.124012] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90403.125337] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90403.125363] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90403.150175] (elapsed 0.027 seconds) done.
<6>[90403.150208] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90403.150228] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90403.208720] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90403.208770] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90403.208837] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90403.210342] (2)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90403.210937] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90403.211049] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90403.211085] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90403.211989] (2)[19178:kworker/u16:2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90403.212396] (2)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<6>[90403.213538] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90403.213569] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90403.213598] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90403.214484] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217536998000000 to 2022/12/15 05:40:11 (now = 2022/12/15 05:39:54)
<5>[90403.214604] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:40:12 (1)
<5>[90403.216934] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90403.217346] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90403.217385] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90403.217396] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90403.217503] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90403.217543] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90403.217589] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90403.217589]
<6>[90403.217612] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90403.217612]
<6>[90403.217633] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90403.217633]
<6>[90403.217655] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90403.217655]
<6>[90403.217776] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90403.217820] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90403.217844] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90403.218521] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90403.218604] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90403.218831] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90403.219172] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90403.219194] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90403.219622] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90403.219641] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90403.220093] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90403.220448] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,820 us
<6>[90403.221310] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90403.221585] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90403.221710] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90403.222187] (3)[10823:Binder:636_2]suspend of devices complete after 57.276
msecs
<6>[90403.227914] (3)[10823:Binder:636_2]late suspend of devices complete after
5.694 msecs
<4>[90403.227941] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90403.233631]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90403.234353] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90403.234732] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90403.235527] (3)[10823:Binder:636_2]noirq suspend of devices complete after
6.903 msecs
<6>[90403.235600] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90403.235600] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90403.235600] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90403.235678] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90403.235678] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90403.235678] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90403.235678] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90403.235678] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90403.235678] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 7737, r13 = 0xc40019ac, debug_flag = 0xf8040330
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x691d3687, wlk_cntcv_h = 0x292, 26M_off_pct = 0
<6>[90403.235678] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 0.236 seconds
<4>[90403.235678] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90403.235678] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90403.235678] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90403.235678] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90403.235678] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90403.235678] -(3)[0:swapper/3]Call trace:
<4>[90403.235678] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90403.235678] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90403.235678] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90403.235678] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90403.235678] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90403.235678] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90403.235678] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90403.235678] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90403.235678] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90403.235678] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90403.235678] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90403.235678] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90403.235678] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90403.235678] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90403.235678] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90403.235678] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90403.235678] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90403.235678] -(3)[0:swapper/3]---[ end trace 308173880bd0bf79 ]---
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90403.235678] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/0.000/0.000/0.000/0.000 seconds
<6>[90403.235678] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90403.235789] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90403.235814] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90403.238079] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_resume
<5>[90403.239530]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90403.239554] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90403.241567] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90403.247082] (3)[10823:Binder:636_2]noirq resume of devices complete after
10.501 msecs
<6>[90403.247373] (3)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(85)
<6>[90403.247768] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90403.247792] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90403.252646] (3)[10823:Binder:636_2]early resume of devices complete after
4.806 msecs
<5>[90403.253109] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90403.256151] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90403.256530] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90403.256570] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2488 us
<5>[90403.256838] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90403.257644] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90403.257674] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90403.257750] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90403.257782] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90403.257942] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90403.258139] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90403.258199] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90403.258223] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90403.258305] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90403.258347] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90403.258467] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90403.258492] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90403.258506] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90403.258650] (1)[10823:Binder:636_2]zcvf, no update time:60 96 avgc:0
avgc_thread
<5>[90403.258677] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90403.261778] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90403.262985] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90403.263077] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90403.263356] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90403.263390] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90403.264089] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90403.264182] (3)[7406:kworker/3:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90403.264983] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90403.265204] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90403.265496] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90403.266251] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90403.266295] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90403.268864] (0)[10823:Binder:636_2]resume of devices complete after 16.184
msecs
<3>[90403.273734] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90403.273764] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90403.274315] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90403.274342] (0)[30807:kworker/0:5]Restarting tasks ...
<3>[90403.274774] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90403.274823] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<4>[90403.274947] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 554,
564, 641, 499, 178, 90, 64, 34, success counter cpu: 103, 120, 138, 95, 31, 12, 8,
1, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 163, 197, 206,
177, 62, 18, 8, 3, o: 3-7, p: , f: , t: 90403401355309, 90403428000000,
90403404000000, 90403404000000, 90403676000000, 90403708000000, 90403676000000,
90403612000000,
<6>[90403.280665] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90403.281455] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90403.281503] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90403.281588] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90403.282175] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217536998000000
<12>[90403.287998] (0)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90403.288067] (0)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90403.294658] (6)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<4>[90403.294666] done.
<5>[90403.294677] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90403.294686] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90403.298890] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90403.300067] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178661,8752,14199scp1 sleep state: 54717,23366,23366
<6>[90403.300089] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90403.300089]
<5>[90403.300102] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90403.300113] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90403.300130] -(2)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90403.300142] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90403.301109] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90403.301748] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90403.301784] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:39:55.121388882 UTC
<5>[90403.301792] -(5)[404:EEM_CTRL_B][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<6>[90403.302032] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90403.302102] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90403.302113] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<36>[90403.302390] (0)[576:logd.auditd]type=1400 audit(1671082795.115:1623015):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90403.302425] (2)[853:[email protected]]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0300c0e] bgf wf
<12>[90403.304725] (2)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<6>[90403.307662] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x0010240a], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90403.307695] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90403.307711] (2)[10823:Binder:636_2]PM: suspend exit
<12>[90403.308574] (2)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90403.315320] (1)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90403.319845] (1)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90403.319875] (1)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90403.324795] (1)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90403.331019] (1)[853:[email protected]]healthd: battery l=59 v=3935 t=33.8 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<3>[90403.351111] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90403.408785] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90403.408822] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90403.408864] (2)[10823:Binder:636_2]active wakeup source: ccci_fs
<3>[90403.463906] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<3>[90403.514341] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:324
<6>[90403.514609] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90403.514681] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<6>[90403.561467] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90403.644720] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90403.873365] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90403.873414] (3)[25368:kworker/u16:9]PM: Syncing filesystems ...
<7>[90403.873542] (3)[25368:kworker/u16:9]PM: ++
<7>[90403.881052] (3)[25368:kworker/u16:9]PM: --
<4>[90403.981621] done.
<6>[90403.987646] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10178681,8760,14217scp1 sleep state: 54719,23370,23370
<6>[90403.987682] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90403.987682]
<6>[90403.987707] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90403.987707]
<6>[90403.987730] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90403.987730]
<6>[90403.987751] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90403.987751]
<5>[90403.987773] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90403.987791] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90403.987831] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90403.987860] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90403.988185] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90403.988220] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:39:55.807834959 UTC
<6>[90403.988455] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90403.988514] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90403.988541] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90403.988566] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90403.988718] (3)[576:logd.auditd]type=1400 audit(1671082795.803:1623016):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90403.990171] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90403.992015] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90403.992043] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90404.019204] (elapsed 0.030 seconds) done.
<6>[90404.019242] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90404.019263] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90404.079123] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90404.079179] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90404.079258] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90404.080792] (3)[7608:kworker/u16:11]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90404.081158] (3)[25368:kworker/u16:9]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90404.081439] (3)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90404.081570] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90404.081698] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90404.081737] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90404.082849] (3)[2328:kworker/u16:1][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90404.083559] (3)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90404.083689] (3)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90404.083813] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<6>[90404.084500] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90404.084532] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90404.084563] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90404.085455] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217536998000000 to 2022/12/15 05:40:10 (now = 2022/12/15 05:39:55)
<5>[90404.085585] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:40:11 (1)
<5>[90404.089083] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90404.089547] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90404.089588] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90404.089600] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90404.089715] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90404.089759] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90404.089805] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90404.089805]
<6>[90404.089828] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90404.089828]
<6>[90404.089912] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90404.089912]
<6>[90404.089937] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90404.089937]
<6>[90404.090066] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90404.090113] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90404.090137] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90404.090846] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90404.090934] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90404.091170] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90404.091557] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90404.091580] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90404.092062] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90404.092081] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90404.092542] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90404.092887] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,818 us
<6>[90404.093742] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90404.094107] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90404.094243] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90404.094684] (2)[10823:Binder:636_2]suspend of devices complete after 58.500
msecs
<6>[90404.100465] (2)[10823:Binder:636_2]late suspend of devices complete after
5.750 msecs
<4>[90404.100494] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90404.105215]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90404.105914] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90404.106266] (0)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90404.106934] (2)[10823:Binder:636_2]noirq suspend of devices complete after
5.519 msecs
<6>[90404.107017] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90404.107017] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90404.107017] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90404.107101] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90404.107101] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90404.107101] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90404.107101] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90404.107101] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 502849, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x75aed458, wlk_cntcv_h = 0x292, 26M_off_pct =
83
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 15.345 seconds
<4>[90404.107101] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90404.107101] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90404.107101] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90404.107101] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90404.107101] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90404.107101] -(2)[0:swapper/2]Call trace:
<4>[90404.107101] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90404.107101] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90404.107101] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90404.107101] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90404.107101] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90404.107101] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90404.107101] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90404.107101] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90404.107101] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90404.107101] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90404.107101] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90404.107101] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90404.107101] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90404.107101] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90404.107101] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90404.107101] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90404.107101] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90404.107101] -(2)[0:swapper/2]---[ end trace 308173880bd0bf7a ]---
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 411886 (32k)
<4>[90404.107101] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 12.569/13.985/14.289/13.363/14.4461 seconds
<6>[90404.107101] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90404.107101] -(2)[0:swapper/2]EINT 222 is pending
<6>[90404.107243] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90404.107289] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90404.107259] -(2)[0:swapper/2]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90404.109126] (0)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90404.110309]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90404.110334] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90404.112380] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90404.118282] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.090 msecs
<6>[90404.118548] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90404.118704] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90404.118788] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90404.118834] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90404.118925] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] [timerfd] mt6359-rtc
<4>[90404.118952] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90404.124464] (0)[10823:Binder:636_2]early resume of devices complete after
5.451 msecs
<5>[90404.125176] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90404.127234] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90404.127572] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90404.127613] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1569 us
<5>[90404.128332] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90404.128711] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90404.128737] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90404.128819] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90404.128851] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90404.128940] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90404.129129] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90404.129189] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90404.129211] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90404.129298] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90404.129339] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90404.129938] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90404.129969] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90404.129982] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90404.130129] (1)[10823:Binder:636_2]zcvf, no update time:76 96 avgc:0
avgc_thread
<5>[90404.130158] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90404.132488] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90404.133560] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90404.133660] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90404.134038] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90404.134074] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90404.134735] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90404.134900] (1)[7387:kworker/1:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90404.136984] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90404.137334] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90404.137639] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90404.138965] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90404.139397] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90404.141810] (2)[10823:Binder:636_2]resume of devices complete after 17.311
msecs
<6>[90404.146035] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90404.146058] (2)[30082:kworker/2:1]Restarting tasks ...
<3>[90404.146736] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90404.146772] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90404.147557] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90404.147578] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90404.154408] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90404.155178] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90404.155273] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90404.156225] -(5)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<4>[90404.167912] done.
<5>[90404.167947] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90404.167958] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90404.171621] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90404.180070] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10179039,8930,14413scp1 sleep state: 54721,23370,23370
<6>[90404.180108] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90404.180108]
<5>[90404.180121] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90404.180130] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90404.180148] -(1)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90404.180160] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90404.181173] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90404.181414] -(5)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90404.181896] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90404.181942] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:40:11.351040882 UTC
<6>[90404.182122] (1)[7388:kworker/1:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:3><0x1cdc>
<36>[90404.182193] (2)[576:logd.auditd]type=1400 audit(1671082811.344:1623017):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90404.182202] (1)[7388:kworker/1:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90404.182211] (1)[7388:kworker/1:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90404.182230] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90404.182236] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90404.182258] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90404.183108] (2)[10823:Binder:636_2]PM: suspend exit
<5>[90404.195245] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<3>[90404.225777] (1)[25366:kworker/1:4]typec_cc_orientation = 2
<6>[90404.284297] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90404.284344] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90404.284392] (2)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90404.296466] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90404.331600] (1)[25366:kworker/1:4]chg_type = 0, hvdcp_type = 0
<3>[90404.385202] (1)[25366:kworker/1:4]get_connector_temp: connector_temp:324
<6>[90404.385442] (1)[25366:kworker/1:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90404.385981] (1)[25366:kworker/1:4]mt_charger_plugin plugin:0
<6>[90404.433972] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90404.514408] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90404.942250] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90404.942357] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90404.942417] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90404.942460] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90404.942644] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90404.995220] -(3)[0:swapper/3]lvts_paused = 1
<5>[90404.995305] -(3)[0:swapper/3]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90405.214074] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<6>[90405.240207] (2)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3932,Cur:106,Temp:338,RM:2239,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90405.246362] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90405.246409] (2)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90405.246529] (2)[7383:kworker/u16:6]PM: ++
<7>[90405.255934] (2)[7383:kworker/u16:6]PM: --
<6>[90405.305753] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90405.357750] done.
<6>[90405.364877] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10179066,8946,14443scp1 sleep state: 54723,23370,23370
<6>[90405.364935] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90405.364935]
<6>[90405.364961] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90405.364961]
<6>[90405.364984] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90405.364984]
<6>[90405.365006] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90405.365006]
<5>[90405.365029] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90405.365047] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90405.365089] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90405.365119] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90405.365464] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90405.365499] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:40:12.534612575 UTC
<6>[90405.365712] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90405.365771] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90405.365799] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90405.366033] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90405.366153] (0)[576:logd.auditd]type=1400 audit(1671082812.528:1623018):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90405.367467] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90405.369053] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90405.369081] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90405.396328] (elapsed 0.030 seconds) done.
<6>[90405.396366] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90405.396386] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90405.455118] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90405.455173] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90405.455250] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90405.456718] (2)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90405.457346] (3)[23436:kworker/u16:0]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90405.457548] (3)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90405.457974] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90405.458099] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90405.458137] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90405.459030] (3)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90405.459042] (2)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90405.459112] (3)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90405.459304] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90405.460778] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90405.460819] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90405.460850] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90405.461694] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:40:12)
<5>[90405.461969] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90405.465322] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90405.465779] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90405.465819] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90405.465926] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90405.466054] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90405.466098] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90405.466145] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90405.466145]
<6>[90405.466169] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90405.466169]
<6>[90405.466190] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90405.466190]
<6>[90405.466213] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90405.466213]
<6>[90405.466336] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90405.466379] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90405.466404] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90405.467075] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90405.467162] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90405.467397] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90405.467784] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90405.467807] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90405.468282] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90405.468301] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90405.468731] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90405.469067] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,781 us
<6>[90405.470090] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90405.470385] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90405.470518] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90405.470955] (1)[10823:Binder:636_2]suspend of devices complete after 57.479
msecs
<6>[90405.476679] (1)[10823:Binder:636_2]late suspend of devices complete after
5.693 msecs
<4>[90405.476707] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90405.481602]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90405.482324] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90405.482679] (3)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90405.483347] (1)[10823:Binder:636_2]noirq suspend of devices complete after
5.684 msecs
<6>[90405.483431] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90405.483431] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90405.483431] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<5>[90405.483513] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90405.483513] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90405.483513] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 139200, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x7a0b3dfc, wlk_cntcv_h = 0x292, 26M_off_pct =
70
<6>[90405.483513] -(1)[0:swapper/1][ccci1/WK]CCIF RX bitmap:0x10
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 4.248 seconds
<4>[90405.483513] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90405.483513] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90405.483513] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90405.483513] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90405.483513] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90405.483513] -(1)[0:swapper/1]Call trace:
<4>[90405.483513] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90405.483513] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90405.483513] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90405.483513] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90405.483513] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90405.483513] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90405.483513] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90405.483513] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90405.483513] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90405.483513] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90405.483513] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90405.483513] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90405.483513] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90405.483513] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90405.483513] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90405.483513] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90405.483513] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90405.483513] -(1)[0:swapper/1]---[ end trace 308173880bd0bf7b ]---
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 98375 (32k)
<4>[90405.483513] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 3.002/3.943/3.943/3.712/3.3943 seconds
<6>[90405.483513] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90405.483634] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90405.483677] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90405.483649] -(1)[0:swapper/1]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90405.486263] (3)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90405.487798]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90405.487826] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90405.489882] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90405.495376] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.820 msecs
<6>[90405.495681] (0)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(86)
<6>[90405.495953] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90405.495979] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90405.501200] (1)[10823:Binder:636_2]early resume of devices complete after
5.167 msecs
<5>[90405.501576] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90405.503542] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90405.503910] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90405.503946] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1530 us
<5>[90405.504210] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90405.504729] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90405.504755] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90405.504830] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90405.504862] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90405.504944] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90405.505133] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90405.505188] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90405.505211] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90405.505292] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90405.505333] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90405.505457] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90405.505481] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90405.505495] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90405.505638] (1)[10823:Binder:636_2]zcvf, no update time:82 96 avgc:0
avgc_thread
<5>[90405.505665] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90405.508612] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90405.509575] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90405.509666] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90405.510030] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90405.510065] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90405.510726] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90405.510881] (1)[7388:kworker/1:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90405.512920] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90405.513527] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90405.514852] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90405.514952] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<3>[90405.515083] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90405.518126] (0)[10823:Binder:636_2]resume of devices complete after 16.891
msecs
<6>[90405.522140] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90405.522166] (0)[3064:kworker/0:0]Restarting tasks ...
<3>[90405.523350] (0)[3064:kworker/0:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90405.523390] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90405.524038] (0)[3064:kworker/0:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90405.524071] (0)[3064:kworker/0:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90405.529244] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90405.529286] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90405.529307] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90405.529950] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<4>[90405.542196] done.
<5>[90405.542225] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90405.542240] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90405.547203] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90405.551127] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10179171,9001,14514scp1 sleep state: 54725,23374,23374
<6>[90405.551158] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90405.551158]
<5>[90405.551173] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90405.551183] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90405.551201] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90405.551214] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90405.551751] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90405.552326] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90405.552988] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90405.553028] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:40:16.973690728 UTC
<6>[90405.553218] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<6>[90405.553292] (1)[25366:kworker/1:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<36>[90405.553299] (0)[576:logd.auditd]type=1400 audit(1671082816.968:1623019):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90405.553320] (1)[25366:kworker/1:4]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90405.553355] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90405.553372] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90405.553387] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x20300c0e] bgf wf
<6>[90405.553389] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90405.599491] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90405.654659] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90405.654702] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90405.654751] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<3>[90405.708103] (1)[7386:kworker/1:0]typec_cc_orientation = 2
<6>[90405.765034] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90405.861111] (1)[7386:kworker/1:0]chg_type = 0, hvdcp_type = 0
<3>[90405.915056] (1)[7386:kworker/1:0]get_connector_temp: connector_temp:324
<6>[90405.915133] (1)[7386:kworker/1:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90405.915205] (1)[7386:kworker/1:0]mt_charger_plugin plugin:0
<6>[90406.144619] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90406.144669] (3)[23436:kworker/u16:0]PM: Syncing filesystems ...
<7>[90406.144820] (3)[23436:kworker/u16:0]PM: ++
<7>[90406.152585] (2)[23436:kworker/u16:0]PM: --
<4>[90406.253538] done.
<5>[90406.260835] -(1)[0:swapper/1]lvts_paused = 1
<6>[90406.261463] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10179187,9012,14536scp1 sleep state: 54727,23374,23374
<6>[90406.261493] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90406.261493]
<6>[90406.261517] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90406.261517]
<6>[90406.261541] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90406.261541]
<6>[90406.261563] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90406.261563]
<5>[90406.261585] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90406.261604] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90406.261644] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90406.261673] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90406.262205] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90406.262240] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:40:17.682914728 UTC
<6>[90406.262455] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90406.262514] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90406.262541] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90406.262566] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90406.262769] (3)[576:logd.auditd]type=1400 audit(1671082817.680:1623020):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90406.264006] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90406.265494] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90406.265522] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90406.292494] (elapsed 0.029 seconds) done.
<6>[90406.292532] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90406.292550] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90406.355710] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90406.355767] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90406.355845] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90406.357402] (2)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90406.357773] (2)[23436:kworker/u16:0]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90406.358050] (3)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90406.358122] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90406.358554] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90406.358593] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90406.359711] (2)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90406.360308] (2)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90406.360380] (2)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90406.360415] (3)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<6>[90406.361496] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90406.361525] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90406.361556] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90406.362497] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:40:17)
<5>[90406.362618] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90406.366098] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90406.366540] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90406.366579] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90406.366591] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90406.366708] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90406.366751] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90406.366797] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90406.366797]
<6>[90406.366821] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90406.366821]
<6>[90406.366843] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90406.366843]
<6>[90406.366865] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90406.366865]
<6>[90406.366987] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90406.367030] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90406.367053] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90406.367734] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90406.367821] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90406.368056] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90406.368441] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90406.368464] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90406.368936] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90406.368955] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90406.369438] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90406.369873] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,873 us
<6>[90406.370773] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90406.371074] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90406.371206] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90406.371648] (0)[10823:Binder:636_2]suspend of devices complete after 61.688
msecs
<6>[90406.377956] (0)[10823:Binder:636_2]late suspend of devices complete after
6.278 msecs
<4>[90406.377986] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90406.383925]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90406.384622] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90406.385018] (0)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90406.385899] (0)[10823:Binder:636_2]noirq suspend of devices complete after
7.128 msecs
<6>[90406.385972] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90406.385972] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90406.385972] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90406.386054] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90406.386054] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90406.386054] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 274853, r13 = 0x84000880, debug_flag =
0xf80618ff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7ff, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x813ed8d4, wlk_cntcv_h = 0x292, 26M_off_pct =
93
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 8.387 seconds
<4>[90406.386054] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90406.386054] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90406.386054] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90406.386054] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90406.386054] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90406.386054] -(0)[0:swapper/0]Call trace:
<4>[90406.386054] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90406.386054] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90406.386054] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90406.386054] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90406.386054] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90406.386054] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90406.386054] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90406.386054] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90406.386054] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90406.386054] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90406.386054] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90406.386054] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90406.386054] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90406.386054] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90406.386054] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90406.386054] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90406.386054] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90406.386054] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90406.386054] -(0)[0:swapper/0]---[ end trace 308173880bd0bf7c ]---
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 245915 (32k)
<4>[90406.386054] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 7.504/7.950/7.950/7.578/7.7950 seconds
<6>[90406.386054] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90406.386178] -(0)[0:swapper/0][SCP] ipi id/type/action/event/reserve =
3/17/6/4/0
<6>[90406.386222] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90406.386265] -(0)[0:swapper/0]i2c no need switch top pll
<6>[90406.388287] (0)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_resume
<5>[90406.389468]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90406.389493] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90406.391766] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90406.397646] (0)[10823:Binder:636_2]noirq resume of devices complete after
10.659 msecs
<6>[90406.398359] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
<4>[90406.398385] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90406.404105] (0)[10823:Binder:636_2]early resume of devices complete after
5.662 msecs
<5>[90406.404536] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90406.406884] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90406.407226] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90406.407267] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1649 us
<5>[90406.407546] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90406.408259] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90406.408287] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90406.408371] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90406.408403] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90406.408495] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90406.408690] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90406.408748] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90406.408772] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90406.408856] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90406.408897] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90406.409973] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90406.410003] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90406.410017] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90406.410170] (0)[10823:Binder:636_2]zcvf, no update time:91 96 avgc:0
avgc_thread
<5>[90406.410198] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90406.413254] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90406.414391] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90406.414485] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90406.414818] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90406.414956] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90406.415659] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90406.415819] (0)[3064:kworker/0:0][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90406.417916] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90406.418217] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90406.419252] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90406.420171] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90406.420281] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90406.422876] (2)[10823:Binder:636_2]resume of devices complete after 18.738
msecs
<3>[90406.428356] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90406.428382] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90406.429055] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90406.429076] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90406.429274] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90406.429293] (4)[1315:receiver]Restarting tasks ...
<6>[90406.436972] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90406.438096] (0)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90406.438317] -(0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90406.438330] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<6>[90406.442422] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90406.452663] done.
<5>[90406.452693] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90406.452712] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90406.458366] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90406.459938] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10179388,9113,14660scp1 sleep state: 54729,23374,23374
<6>[90406.459983] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90406.459983]
<5>[90406.460002] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90406.460016] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90406.460041] -(2)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90406.460058] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90406.461095] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90406.461280] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90406.462090] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90406.462145] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:40:26.274446958 UTC
<6>[90406.462343] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<36>[90406.462399] (3)[576:logd.auditd]type=1400 audit(1671082826.266:1623021):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90406.462460] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90406.462477] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90406.462487] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90406.462534] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90406.462565] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90406.462585] (2)[10823:Binder:636_2]PM: suspend exit
<3>[90406.508718] (0)[3064:kworker/0:0]typec_cc_orientation = 2
<6>[90406.549333] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 274853, r13 = 0x84000880, debug_flag =
0xf80618ff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7ff, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90406.549402] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90406.563869] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90406.563914] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90406.614077] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90406.664657] (0)[3064:kworker/0:0]chg_type = 0, hvdcp_type = 0
<3>[90406.715609] (0)[3064:kworker/0:0]get_connector_temp: connector_temp:324
<6>[90406.715686] (0)[3064:kworker/0:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90406.715756] (0)[3064:kworker/0:0]mt_charger_plugin plugin:0
<6>[90406.768555] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90406.885347] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90406.885390] (4)[25368:kworker/u16:9]PM: Syncing filesystems ...
<7>[90406.885971] (4)[25368:kworker/u16:9]PM: ++
<7>[90406.895179] (3)[25368:kworker/u16:9]PM: --
<5>[90406.944212] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90406.944314] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90406.944369] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90406.944411] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<4>[90406.993627] done.
<5>[90406.998921] -(2)[0:swapper/2]lvts_paused = 1
<6>[90407.002948] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10179404,9119,14678scp1 sleep state: 54731,23374,23374
<6>[90407.003006] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90407.003006]
<6>[90407.003030] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90407.003030]
<6>[90407.003053] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90407.003053]
<6>[90407.003076] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90407.003076]
<5>[90407.003098] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90407.003117] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90407.003158] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90407.003188] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90407.003533] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90407.003569] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:40:26.815889497 UTC
<6>[90407.003830] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90407.003888] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90407.003917] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90407.003943] (3)[613:teei_daemon]Freezing user space processes ...
<5>[90407.005303] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90407.007242] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90407.007270] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90407.034154] (elapsed 0.030 seconds) done.
<6>[90407.034191] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90407.034212] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.012 seconds) done.
<3>[90407.097506] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:324
<3>[90407.097562] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90407.097640] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90407.099311] (1)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90407.099495] (3)[25368:kworker/u16:9]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90407.099670] (2)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90407.099843] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90407.099970] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90407.100006] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90407.100850] (3)[25368:kworker/u16:9][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90407.101891] (3)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90407.101958] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90407.102015] (2)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90407.102840] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90407.102867] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90407.102898] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90407.103731] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:40:26)
<5>[90407.103890] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90407.107309] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90407.107762] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90407.107803] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90407.107815] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90407.107935] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90407.107980] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90407.108030] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90407.108030]
<6>[90407.108054] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90407.108054]
<6>[90407.108076] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90407.108076]
<6>[90407.108098] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90407.108098]
<6>[90407.108223] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90407.108268] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90407.108292] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90407.108996] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90407.109084] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90407.109323] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90407.109707] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90407.109729] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90407.110273] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90407.110294] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90407.110784] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90407.111175] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,898 us
<6>[90407.112028] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90407.112323] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90407.112458] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90407.112869] (0)[10823:Binder:636_2]suspend of devices complete after 61.907
msecs
<6>[90407.118822] (0)[10823:Binder:636_2]late suspend of devices complete after
5.922 msecs
<4>[90407.118851] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90407.123992]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90407.124679] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90407.125034] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90407.125713] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.939 msecs
<6>[90407.125838] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90407.125838] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90407.125838] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90407.125920] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90407.125920] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90407.125920] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 1305585, r13 = 0xc400e9bc, debug_flag = 0xf80618ff
0x4001e66e, connectivity not sleep, modem not sleep, subsys sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a6143f9, req_sta = 0x3c3d0df
0x0 0x7c000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xa0b1d0df, wlk_cntcv_h = 0x292, 26M_off_pct =
88
<6>[90407.125920] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x20
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 39.843 seconds
<4>[90407.125920] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90407.125920] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90407.125920] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90407.125920] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90407.125920] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90407.125920] -(0)[0:swapper/0]Call trace:
<4>[90407.125920] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90407.125920] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90407.125920] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90407.125920] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90407.125920] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90407.125920] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90407.125920] -(0)[0:swapper/0] mt6885_show_message+0xbd0/0xe28
<4>[90407.125920] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90407.125920] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90407.125920] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90407.125920] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90407.125920] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90407.125920] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90407.125920] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90407.125920] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90407.125920] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90407.125920] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90407.125920] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90407.125920] -(0)[0:swapper/0]---[ end trace 308173880bd0bf7d ]---
<4>[90407.125920] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90407.125920] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90407.125920] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90407.125920] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90407.125920] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90407.125920] -(0)[0:swapper/0]Call trace:
<4>[90407.125920] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90407.125920] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90407.125920] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90407.125920] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90407.125920] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90407.125920] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90407.125920] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90407.125920] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90407.125920] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90407.125920] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90407.125920] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90407.125920] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90407.125920] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90407.125920] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90407.125920] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90407.125920] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90407.125920] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90407.125920] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90407.125920] -(0)[0:swapper/0]---[ end trace 308173880bd0bf7e ]---
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 1166213 (32k)
<4>[90407.125920] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 35.589/39.510/39.484/37.797/39.9506 seconds
<6>[90407.125920] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90407.126032] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90407.126075] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90407.126047] -(0)[0:swapper/0]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90407.127527] (3)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90407.128356]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90407.128615] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90407.130659] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90407.135998] (1)[10823:Binder:636_2]noirq resume of devices complete after
9.145 msecs
<6>[90407.136287] (0)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(87)
<6>[90407.136546] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] ttyC0
<4>[90407.136572] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90407.141318] (1)[10823:Binder:636_2]early resume of devices complete after
4.696 msecs
<5>[90407.141677] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90407.143600] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90407.143959] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90407.143996] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1491 us
<5>[90407.144262] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90407.144762] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90407.144788] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90407.144860] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90407.144892] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90407.144970] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90407.145151] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90407.145209] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90407.145231] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90407.145312] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90407.145352] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90407.145470] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90407.145494] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90407.145507] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90407.145658] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90407.148574] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90407.149579] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90407.149669] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90407.150021] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90407.150056] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90407.150773] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90407.150858] (0)[25356:kworker/0:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90407.151633] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90407.151850] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90407.152102] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90407.152725] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90407.153321] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90407.155622] (2)[10823:Binder:636_2]resume of devices complete after 14.273
msecs
<6>[90407.159817] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90407.159840] (2)[7519:kworker/2:4]Restarting tasks ...
<3>[90407.160199] (2)[7519:kworker/2:4]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90407.160233] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90407.160793] (2)[7519:kworker/2:4]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90407.160814] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90407.166455] (2)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90407.166469] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90407.166504] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90407.168053] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<4>[90407.178795] done.
<5>[90407.178824] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90407.178839] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90407.182310] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90407.182558] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180318,9551,15131scp1 sleep state: 54733,23374,23374
<6>[90407.182584] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90407.182584]
<5>[90407.182607] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90407.182624] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90407.182649] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90407.182668] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90407.183111] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90407.183835] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90407.184813] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90407.184849] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:06.844422421 UTC
<6>[90407.185028] (0)[3064:kworker/0:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:0><0xbf8>
<6>[90407.185115] (0)[3064:kworker/0:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90407.185129] (0)[3064:kworker/0:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90407.185162] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90407.185180] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90407.185339] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90407.188720] (0)[10823:Binder:636_2]PM: suspend exit
<3>[90407.240452] (0)[7416:kworker/0:2]typec_cc_orientation = 2
<6>[90407.289967] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90407.290007] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90407.290045] (1)[10823:Binder:636_2]active wakeup source: ttyC0
<3>[90407.348348] (0)[7416:kworker/0:2]chg_type = 0, hvdcp_type = 0
<6>[90407.400929] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90407.448962] (0)[7416:kworker/0:2]get_connector_temp: connector_temp:325
<6>[90407.449005] (0)[7416:kworker/0:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90407.449067] (0)[7416:kworker/0:2]mt_charger_plugin plugin:0
<6>[90407.461470] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90407.531192] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90407.710982] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90407.711020] (2)[23438:kworker/u16:4]PM: Syncing filesystems ...
<7>[90407.711251] (2)[23438:kworker/u16:4]PM: ++
<7>[90407.719346] (2)[23438:kworker/u16:4]PM: --
<6>[90407.778281] (0)[296:hang_detect][Hang_Detect] hang_detect thread counts down
10:10, status 1.
<4>[90407.818959] done.
<5>[90407.825516] -(1)[0:swapper/1]lvts_paused = 1
<5>[90407.827724] -(1)[0:swapper/1]lvts_paused = 1
<6>[90407.830483] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180332,9555,15144scp1 sleep state: 54735,23378,23378
<6>[90407.830530] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90407.830530]
<6>[90407.830555] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90407.830555]
<6>[90407.830578] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90407.830578]
<6>[90407.830599] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90407.830599]
<5>[90407.830620] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90407.830638] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90407.830671] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90407.830698] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90407.830988] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90407.831021] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:07.490603267 UTC
<6>[90407.831207] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90407.831264] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90407.831290] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90407.831313] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90407.831452] (3)[576:logd.auditd]type=1400 audit(1671082867.489:1623024):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90407.832623] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90407.834148] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90407.834181] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90407.852709] (1)[10823:Binder:636_2]PM: Last active Wakeup Source:
batterysecret
<3>[90407.852748] (1)[10823:Binder:636_2]Freezing of tasks aborted after 0.021
seconds
<6>[90407.852770] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90407.852785] (3)[1314:receiver]Restarting tasks ...
<6>[90407.858653] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90407.859200] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90407.859299] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90407.874122] done.
<5>[90407.874153] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90407.874173] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90407.879048] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90407.879123] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180333,9559,15165scp1 sleep state: 54737,23378,23378
<6>[90407.879155] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90407.879155]
<5>[90407.879179] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90407.879196] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90407.879220] -(1)[10823:Binder:636_2]Abort: Last active Wakeup Source:
batterysecret
<5>[90407.879239] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90407.880367] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90407.881374] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90407.881424] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:07.540991036 UTC
<6>[90407.881638] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<36>[90407.881727] (3)[576:logd.auditd]type=1400 audit(1671082867.537:1623025):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90407.882127] (1)[7386:kworker/1:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90407.882147] (1)[7386:kworker/1:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90407.882205] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90407.882287] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90407.882323] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90407.882343] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90408.084686] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90408.084726] (2)[23438:kworker/u16:4]PM: Syncing filesystems ...
<7>[90408.084952] (2)[23438:kworker/u16:4]PM: ++
<7>[90408.091572] (0)[23438:kworker/u16:4]PM: --
<4>[90408.193952] done.
<6>[90408.199310] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180341,9564,15178scp1 sleep state: 54739,23378,23378
<6>[90408.199342] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90408.199342]
<6>[90408.199366] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90408.199366]
<6>[90408.199389] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90408.199389]
<6>[90408.199410] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90408.199410]
<5>[90408.199431] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90408.199449] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90408.199476] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90408.199504] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90408.199953] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90408.199987] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:07.859569498 UTC
<6>[90408.200352] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<36>[90408.200407] (3)[576:logd.auditd]type=1400 audit(1671082867.857:1623026):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90408.200424] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90408.200440] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90408.200455] (5)[613:teei_daemon]Freezing user space processes ...
<5>[90408.201807] (5)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<4>[90408.225669] (elapsed 0.025 seconds) done.
<6>[90408.225706] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90408.225726] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<6>[90408.268699] -(3)[0:swapper/3][bq27z561] fg_update_status:
SOC:59,Volt:3936,Cur:121,Temp:338,RM:2239,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90408.275465] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 673,
635, 969, 680, 289, 188, 137, 80, success counter cpu: 135, 100, 71, 150, 47, 31,
13, 1, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 197, 156,
116, 227, 71, 42, 24, 3, o: 0-1,4-7, p: , f: , t: 90408443309924, 90408405847925,
90408404000000, 90408404000000, 90408796000000, 90408604000000, 90409020000000,
90408474370000,
<3>[90408.278231] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90408.278259] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90408.278318] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90408.279613] (2)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90408.279808] (0)[23438:kworker/u16:4]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90408.279879] (3)[7608:kworker/u16:11]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90408.280363] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90408.280469] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90408.280505] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90408.281291] (2)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90408.281978] (2)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90408.282034] (0)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<3>[90408.282092] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<6>[90408.282941] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90408.282967] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90408.282994] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90408.283699] (1)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:41:07)
<5>[90408.283815] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90408.287247] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90408.287638] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90408.287674] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90408.287685] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90408.287782] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90408.287821] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90408.287866] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90408.287866]
<6>[90408.287888] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90408.287888]
<6>[90408.287909] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90408.287909]
<6>[90408.287931] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90408.287931]
<6>[90408.288042] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90408.288082] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90408.288105] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90408.288671] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90408.288750] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90408.288965] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90408.289296] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90408.289317] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90408.289735] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90408.289754] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90408.290398] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90408.290725] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,984 us
<6>[90408.291667] (1)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000a
<6>[90408.291915] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90408.292032] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90408.292416] (1)[10823:Binder:636_2]suspend of devices complete after 53.582
msecs
<6>[90408.299169] (1)[10823:Binder:636_2]late suspend of devices complete after
6.722 msecs
<4>[90408.299196] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90408.304763]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90408.305399] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90408.305771] (1)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90408.306609] (1)[10823:Binder:636_2]noirq suspend of devices complete after
6.782 msecs
<6>[90408.306683] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90408.306683] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90408.306683] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90408.306756] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90408.306756] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90408.306756] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90408.306756] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90408.306756] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90408.306756] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 42142, r13 = 0xc40019ac, debug_flag = 0xf8040300
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6747fd, req_sta = 0x1c000ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xa29bd42b, wlk_cntcv_h = 0x292, 26M_off_pct = 0
<6>[90408.306756] -(1)[0:swapper/1][ccci1/WK]CCIF RX bitmap:0x10
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 1.286 seconds
<4>[90408.306756] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90408.306756] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90408.306756] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90408.306756] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90408.306756] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90408.306756] -(1)[0:swapper/1]Call trace:
<4>[90408.306756] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90408.306756] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90408.306756] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90408.306756] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90408.306756] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90408.306756] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90408.306756] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90408.306756] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90408.306756] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90408.306756] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90408.306756] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90408.306756] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90408.306756] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90408.306756] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90408.306756] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90408.306756] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90408.306756] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90408.306756] -(1)[0:swapper/1]---[ end trace 308173880bd0bf7f ]---
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90408.306756] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/1.000/0.000/1.000/1.1000 seconds
<6>[90408.306756] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90408.306853] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90408.306880] -(1)[0:swapper/1]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90408.308646] (1)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_resume
<5>[90408.309471]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90408.309493] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90408.311759] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90408.317089] (1)[10823:Binder:636_2]noirq resume of devices complete after
9.435 msecs
<6>[90408.317390] (2)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(88)
<6>[90408.317637] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90408.317664] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90408.322751] (1)[10823:Binder:636_2]early resume of devices complete after
5.039 msecs
<5>[90408.323182] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90408.326186] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90408.326482] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90408.326518] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2528 us
<5>[90408.326788] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90408.327345] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90408.327372] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90408.327444] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90408.327475] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90408.327554] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90408.327738] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90408.327797] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90408.327820] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90408.327899] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90408.327939] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90408.328058] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90408.328083] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90408.328096] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90408.328235] (1)[10823:Binder:636_2]zcvf, no update time:2 96 avgc:0
avgc_thread
<5>[90408.328261] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90408.331240] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90408.332226] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90408.332319] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90408.332604] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90408.332637] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90408.333319] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90408.333481] (1)[7387:kworker/1:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90408.335569] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90408.335864] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90408.336829] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90408.338127] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90408.338366] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90408.341655] (3)[10823:Binder:636_2]resume of devices complete after 18.870
msecs
<3>[90408.345108] (3)[7406:kworker/3:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90408.345136] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90408.346010] (3)[7406:kworker/3:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90408.346035] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90408.346082] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90408.346111] (4)[1315:receiver]Restarting tasks ...
<6>[90408.353273] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90408.353310] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90408.353386] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90408.353900] -(5)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<12>[90408.360599] (1)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<12>[90408.360666] (1)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<4>[90408.366054] done.
<5>[90408.366082] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90408.366099] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90408.370032] (2)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<5>[90408.370506] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90408.371526] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180377,9584,15222scp1 sleep state: 54741,23378,23378
<6>[90408.371552] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90408.371552]
<5>[90408.371572] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90408.371587] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90408.371610] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90408.371626] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90408.372683] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90408.373029] -(2)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90408.373539] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90408.373570] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:09.321961112 UTC
<6>[90408.373722] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90408.373861] (0)[25356:kworker/0:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90408.373874] (0)[25356:kworker/0:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90408.373903] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90408.373920] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90408.373934] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90408.373962] (3)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90408.374412] (3)[576:logd.auditd]type=1400 audit(1671082869.315:1623027):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<12>[90408.382612] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<12>[90408.382657] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<12>[90408.390415] (3)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<12>[90408.400613] (2)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<12>[90408.400679] (2)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<12>[90408.407402] (2)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<12>[90408.414543] (2)[853:[email protected]]healthd: battery l=59 v=3928 t=33.8 h=2
st=3 c=179 fc=4110000 cc=670 chg=
<3>[90408.422014] (1)[7387:kworker/1:2]typec_cc_orientation = 2
<6>[90408.467697] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90408.475172] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90408.475208] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90408.475245] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90408.530731] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90408.584182] (1)[7387:kworker/1:2]chg_type = 0, hvdcp_type = 0
<3>[90408.634389] (1)[7387:kworker/1:2]get_connector_temp: connector_temp:326
<6>[90408.634634] (1)[7387:kworker/1:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90408.635267] (1)[7387:kworker/1:2]mt_charger_plugin plugin:0
<6>[90408.684883] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90408.926803] (6)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90408.926828] (4)[23436:kworker/u16:0]PM: Syncing filesystems ...
<7>[90408.927141] (4)[23436:kworker/u16:0]PM: ++
<7>[90408.933582] (4)[23436:kworker/u16:0]PM: --
<5>[90408.944602] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90408.944675] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90408.944726] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90408.944768] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90409.034374] done.
<5>[90409.043390] -(3)[0:swapper/3]lvts_paused = 1
<5>[90409.043460] -(3)[0:swapper/3]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90409.043953] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180393,9598,15245scp1 sleep state: 54743,23380,23380
<6>[90409.043981] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90409.043981]
<6>[90409.044006] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90409.044006]
<6>[90409.044028] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90409.044028]
<6>[90409.044050] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90409.044050]
<5>[90409.044071] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90409.044089] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90409.044122] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90409.044150] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90409.044517] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90409.044550] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:09.992947342 UTC
<6>[90409.044734] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90409.044790] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90409.044816] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90409.044839] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90409.045007] (0)[576:logd.auditd]type=1400 audit(1671082869.991:1623028):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90409.046455] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90409.047475] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90409.047502] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90409.071222] (elapsed 0.026 seconds) done.
<6>[90409.071257] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90409.071277] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.009 seconds) done.
<3>[90409.126690] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90409.126735] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90409.126794] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90409.128039] (2)[23436:kworker/u16:0]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90409.128621] (0)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90409.128803] (1)[23437:kworker/u16:3]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90409.128937] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90409.129042] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90409.129077] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90409.129844] (2)[23436:kworker/u16:0][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90409.130277] (2)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90409.130393] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90409.130448] (1)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90409.131242] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90409.131266] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90409.131293] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90409.132016] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:41:09)
<5>[90409.132133] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90409.135421] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90409.135826] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90409.135861] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90409.135871] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90409.135968] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90409.136006] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90409.136049] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90409.136049]
<6>[90409.136071] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90409.136071]
<6>[90409.136093] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90409.136093]
<6>[90409.136114] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90409.136114]
<6>[90409.136224] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90409.136262] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90409.136286] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90409.136846] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90409.136924] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90409.137142] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90409.137473] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90409.137494] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90409.137959] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90409.137980] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90409.138403] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90409.138738] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,773 us
<6>[90409.139635] (2)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000a
<6>[90409.139888] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90409.140005] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90409.140386] (2)[10823:Binder:636_2]suspend of devices complete after 56.310
msecs
<6>[90409.147073] (2)[10823:Binder:636_2]late suspend of devices complete after
6.658 msecs
<4>[90409.147100] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90409.152800]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90409.153426] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90409.153861] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90409.154640] (2)[10823:Binder:636_2]noirq suspend of devices complete after
6.768 msecs
<6>[90409.154709] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90409.154709] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90409.154709] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90409.154781] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90409.154781] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90409.154781] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90409.154781] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90409.154781] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90409.154781] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 926, r13 = 0xc40009ac, debug_flag = 0xf8040300
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a65e3f9, req_sta = 0x1c000df
0x0 0x7c000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xa34a2f0f, wlk_cntcv_h = 0x292, 26M_off_pct = 0
<6>[90409.154781] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x20
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 0.028 seconds
<4>[90409.154781] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90409.154781] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90409.154781] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90409.154781] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90409.154781] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90409.154781] -(2)[0:swapper/2]Call trace:
<4>[90409.154781] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90409.154781] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90409.154781] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90409.154781] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90409.154781] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90409.154781] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90409.154781] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90409.154781] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90409.154781] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90409.154781] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90409.154781] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90409.154781] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90409.154781] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90409.154781] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90409.154781] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90409.154781] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90409.154781] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90409.154781] -(2)[0:swapper/2]---[ end trace 308173880bd0bf80 ]---
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90409.154781] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/0.000/0.000/0.000/0.000 seconds
<6>[90409.154781] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90409.154877] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90409.154905] -(2)[0:swapper/2]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90409.156699] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90409.157668]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90409.157692] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90409.159987] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90409.165455] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.666 msecs
<6>[90409.165739] (2)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(89)
<6>[90409.166274] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ttyC0
<4>[90409.166306] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90409.171172] (1)[10823:Binder:636_2]early resume of devices complete after
4.815 msecs
<5>[90409.171862] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90409.174793] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90409.175157] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90409.175193] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2572 us
<5>[90409.175904] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90409.176237] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90409.176262] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90409.176334] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90409.176366] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90409.176445] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90409.176631] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90409.176693] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90409.176717] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90409.176799] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90409.176839] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90409.176962] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90409.176986] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90409.177000] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90409.177142] (2)[10823:Binder:636_2]zcvf, no update time:3 96 avgc:0
avgc_thread
<5>[90409.177168] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90409.180314] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90409.181365] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90409.181456] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90409.181743] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90409.182137] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90409.182704] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90409.182781] (2)[23427:kworker/2:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90409.184716] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90409.184983] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90409.185957] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90409.186043] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90409.186177] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90409.188731] (3)[10823:Binder:636_2]resume of devices complete after 17.527
msecs
<3>[90409.192214] (3)[7406:kworker/3:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90409.192241] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90409.192951] (3)[7406:kworker/3:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90409.192975] (3)[7406:kworker/3:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90409.193194] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90409.193215] (2)[1314:receiver]Restarting tasks ...
<6>[90409.201249] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90409.201466] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90409.202025] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90409.202400] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<4>[90409.215205] done.
<5>[90409.215230] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90409.215240] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90409.220121] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90409.222687] -(0)[5444:Binder:1454_19]alarmtimer_enqueue, 217605345000000
<6>[90409.224039] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180404,9601,15274scp1 sleep state: 54745,23380,23380
<6>[90409.224065] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90409.224065]
<5>[90409.224083] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90409.224096] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90409.224116] -(3)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90409.224130] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90409.225164] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90409.225389] -(2)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90409.225893] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90409.225937] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:10.205260188 UTC
<36>[90409.226150] (0)[576:logd.auditd]type=1400 audit(1671082870.198:1623029):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90409.226291] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90409.226313] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90409.226331] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90409.226356] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90409.226402] (3)[7406:kworker/3:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90409.226418] (3)[7406:kworker/3:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90409.226458] (1)[7386:kworker/1:0]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90409.277018] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90409.327355] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90409.327392] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90409.327430] (1)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90409.428273] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90409.476331] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90409.529049] (2)[23427:kworker/2:2]typec_cc_orientation = 2
<3>[90409.633985] (2)[23427:kworker/2:2]chg_type = 0, hvdcp_type = 0
<3>[90409.685160] (2)[23427:kworker/2:2]get_connector_temp: connector_temp:326
<6>[90409.685200] (2)[23427:kworker/2:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90409.685233] (2)[23427:kworker/2:2]mt_charger_plugin plugin:0
<4>[90409.726559] -(7)[4001:m.android.phone]CPU7: update max cpu_capacity 934
<6>[90409.733898] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90409.734037] (4)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90410.014367] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90410.014411] (2)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90410.014667] (2)[7383:kworker/u16:6]PM: ++
<7>[90410.023549] (0)[7383:kworker/u16:6]PM: --
<5>[90410.078685] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<4>[90410.121924] done.
<6>[90410.127080] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180421,9613,15297scp1 sleep state: 54747,23380,23380
<6>[90410.127113] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90410.127113]
<6>[90410.127137] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90410.127137]
<6>[90410.127161] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90410.127161]
<6>[90410.127183] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90410.127183]
<5>[90410.127205] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90410.127222] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90410.127256] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90410.127297] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90410.127686] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90410.127721] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:11.107057495 UTC
<36>[90410.128139] (0)[576:logd.auditd]type=1400 audit(1671082871.102:1623030):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90410.128913] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90410.128967] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90410.128995] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90410.129019] (3)[613:teei_daemon]Freezing user space processes ...
<5>[90410.130319] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90410.131744] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90410.131773] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90410.156584] (elapsed 0.027 seconds) done.
<6>[90410.156671] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90410.156693] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90410.209308] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:325
<3>[90410.209358] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90410.209425] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90410.210828] (0)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90410.211169] (0)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90410.211265] (1)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90410.211500] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90410.211615] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90410.211652] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90410.213394] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90410.213406] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90410.213449] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90410.334150] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:26%
<6>[90410.334251] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90410.334272] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90410.334288] (4)[7032:kworker/4:0][bq27z561] fg_update_status:
SOC:59,Volt:3925,Cur:197,Temp:338,RM:2239,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90410.334296] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90410.334315] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90410.334324] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90410.334337] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33183,33542909,5450), tx=(12955,1999,10956), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90410.334414] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<3>[90410.336912] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90410.338412] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90410.338469] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90410.338497] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90410.339239] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:41:11)
<5>[90410.339441] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90410.342854] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90410.343298] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90410.343336] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90410.343347] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90410.343454] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90410.343496] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90410.343541] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90410.343541]
<6>[90410.343564] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90410.343564]
<6>[90410.343586] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90410.343586]
<6>[90410.343608] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90410.343608]
<6>[90410.343720] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90410.343760] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90410.343784] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90410.344418] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90410.344502] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90410.344732] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90410.345074] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90410.345096] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90410.345514] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90410.345533] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90410.348052] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90410.348418] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,2896 us
<6>[90410.349207] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90410.349484] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90410.349608] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90410.350061] (3)[10823:Binder:636_2]suspend of devices complete after 178.484
msecs
<6>[90410.355534] (3)[10823:Binder:636_2]late suspend of devices complete after
5.440 msecs
<4>[90410.355562] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90410.360129]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90410.360845] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90410.361186] (0)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90410.361876] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.601 msecs
<6>[90410.361955] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90410.361955] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90410.361955] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90410.362034] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90410.362034] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90410.362034] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90410.362034] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90410.362034] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90410.362034] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 43227, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6543f9, req_sta = 0x3c000ff 0x180000
0x7c000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xa54005cf, wlk_cntcv_h = 0x292, 26M_off_pct = 1
<6>[90410.362034] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 1.319 seconds
<4>[90410.362034] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90410.362034] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90410.362034] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90410.362034] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90410.362034] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90410.362034] -(3)[0:swapper/3]Call trace:
<4>[90410.362034] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90410.362034] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90410.362034] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90410.362034] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90410.362034] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90410.362034] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90410.362034] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90410.362034] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90410.362034] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90410.362034] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90410.362034] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90410.362034] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90410.362034] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90410.362034] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90410.362034] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90410.362034] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90410.362034] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90410.362034] -(3)[0:swapper/3]---[ end trace 308173880bd0bf81 ]---
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90410.362034] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/1.794/0.099/1.794/1.1794 seconds
<6>[90410.362034] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90410.362159] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90410.362202] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90410.362169] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90410.363949] (0)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_resume
<5>[90410.364838]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90410.364864] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90410.367078] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90410.372655] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.706 msecs
<6>[90410.372967] (1)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(90)
<6>[90410.373235] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90410.373262] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90410.378268] (3)[10823:Binder:636_2]early resume of devices complete after
4.955 msecs
<5>[90410.378693] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90410.380589] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90410.380916] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90410.380953] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1460 us
<5>[90410.381238] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90410.381814] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90410.381841] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90410.381917] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90410.381949] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90410.382032] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90410.382220] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90410.382275] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90410.382298] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90410.382381] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90410.382421] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90410.382543] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90410.382568] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90410.382581] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90410.382722] (3)[10823:Binder:636_2]zcvf, no update time:5 96 avgc:0
avgc_thread
<5>[90410.382749] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90410.385601] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90410.386756] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90410.386852] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90410.387140] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90410.387173] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90410.387799] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90410.387940] (3)[2356:kworker/3:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90410.389981] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90410.390362] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90410.390659] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90410.391445] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90410.392339] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90410.394591] (1)[10823:Binder:636_2]resume of devices complete after 16.289
msecs
<6>[90410.398015] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90410.398041] (1)[7386:kworker/1:0]Restarting tasks ...
<3>[90410.399339] (1)[7386:kworker/1:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90410.399387] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90410.400134] (1)[7386:kworker/1:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90410.400167] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90410.405357] (7)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90410.405404] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90410.405580] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90410.405709] -(7)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<4>[90410.417713] done.
<5>[90410.418103] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90410.418125] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90410.421808] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90410.423379] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180462,9640,15345scp1 sleep state: 54749,23380,23380
<6>[90410.423446] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90410.423446]
<5>[90410.423470] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90410.423488] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90410.423513] -(3)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90410.423532] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90410.424596] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90410.424956] -(2)[406:EEMG_CTRL_GPU][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90410.425701] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90410.425801] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:12.727825109 UTC
<6>[90410.425980] (3)[25513:kworker/3:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:4><0x63a9>
<6>[90410.426086] (3)[25513:kworker/3:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90410.426101] (3)[25513:kworker/3:4]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<36>[90410.426109] (2)[576:logd.auditd]type=1400 audit(1671082872.720:1623031):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90410.426129] (3)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0200c0e] wf
<6>[90410.426167] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90410.426197] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90410.426216] (3)[10823:Binder:636_2]PM: suspend exit
<3>[90410.476321] (3)[23446:kworker/3:1]typec_cc_orientation = 2
<6>[90410.480363] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90410.529597] (6)[10823:Binder:636_2]active wakeup source: main
<6>[90410.529628] (6)[10823:Binder:636_2]active wakeup source: usb
<6>[90410.529669] (6)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90410.586501] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90410.639005] (3)[23446:kworker/3:1]chg_type = 0, hvdcp_type = 0
<6>[90410.690817] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90410.741356] (3)[23446:kworker/3:1]get_connector_temp: connector_temp:326
<6>[90410.741887] (3)[23446:kworker/3:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90410.741983] (3)[23446:kworker/3:1]mt_charger_plugin plugin:0
<5>[90410.945216] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90410.945252] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90410.945327] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90410.945381] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90410.945424] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90411.453961] (3)[23446:kworker/3:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:1><0x5b96>
<6>[90411.485097] (2)[915:HwBinder:896_2][bq27z561] fg_update_status:
SOC:59,Volt:3933,Cur:132,Temp:338,RM:2239,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90411.485504] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90411.646284] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 43227, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6543f9, req_sta = 0x3c000ff 0x180000
0x7c000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90411.646373] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90411.838352] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90411.838391] (0)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90411.838590] (0)[7383:kworker/u16:6]PM: ++
<7>[90411.847179] (1)[7383:kworker/u16:6]PM: --
<4>[90411.946957] done.
<6>[90411.952034] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180498,9655,15371scp1 sleep state: 54751,23380,23380
<6>[90411.952066] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90411.952066]
<6>[90411.952090] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90411.952090]
<6>[90411.952113] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90411.952113]
<6>[90411.952135] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90411.952135]
<5>[90411.952156] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90411.952173] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90411.952203] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90411.952230] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90411.952498] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90411.952530] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:14.254625494 UTC
<6>[90411.952691] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90411.952747] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90411.952773] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90411.952795] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90411.952971] (2)[576:logd.auditd]type=1400 audit(1671082874.248:1623032):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90411.954600] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90411.955564] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90411.955600] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90411.979150] (elapsed 0.026 seconds) done.
<6>[90411.979188] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90411.979207] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.009 seconds) done.
<3>[90412.034690] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90412.034736] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90412.034797] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90412.036122] (1)[2328:kworker/u16:1]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90412.036445] (1)[7383:kworker/u16:6]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90412.036614] (1)[23436:kworker/u16:0]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90412.036733] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90412.036840] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90412.036878] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90412.037682] (1)[2328:kworker/u16:1][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90412.038713] (1)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90412.038785] (1)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90412.038837] (1)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<6>[90412.039170] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90412.039199] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90412.039226] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90412.039924] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:41:14)
<5>[90412.040041] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90412.043389] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90412.043788] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90412.043823] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90412.043833] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90412.043932] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90412.043971] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90412.044013] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90412.044013]
<6>[90412.044035] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90412.044035]
<6>[90412.044056] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90412.044056]
<6>[90412.044077] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90412.044077]
<6>[90412.044185] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90412.044223] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90412.044246] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90412.044841] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90412.044922] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90412.045141] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90412.045472] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90412.045493] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90412.045947] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90412.045968] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90412.046403] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90412.046754] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,802 us
<6>[90412.047503] (3)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000a
<6>[90412.047757] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90412.047872] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90412.048249] (3)[10823:Binder:636_2]suspend of devices complete after 56.065
msecs
<6>[90412.053276] (3)[10823:Binder:636_2]late suspend of devices complete after
4.999 msecs
<4>[90412.053303] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90412.057637]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90412.058408] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90412.058755] (1)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90412.059389] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.371 msecs
<6>[90412.059468] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90412.059468] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90412.059468] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90412.059540] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90412.059540] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90412.059540] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90412.059540] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90412.059540] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90412.059540] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 21447, r13 = 0xc40009ac, debug_flag = 0xf8040300
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a6747f9, req_sta = 0x3c000df
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xa71323e0, wlk_cntcv_h = 0x292, 26M_off_pct = 0
<6>[90412.059540] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x20
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 0.654 seconds
<4>[90412.059540] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90412.059540] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90412.059540] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90412.059540] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90412.059540] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90412.059540] -(3)[0:swapper/3]Call trace:
<4>[90412.059540] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90412.059540] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90412.059540] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90412.059540] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90412.059540] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90412.059540] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90412.059540] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90412.059540] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90412.059540] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90412.059540] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90412.059540] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90412.059540] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90412.059540] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90412.059540] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90412.059540] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90412.059540] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90412.059540] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90412.059540] -(3)[0:swapper/3]---[ end trace 308173880bd0bf82 ]---
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 4252 (32k)
<4>[90412.059540] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.129/1.048/0.193/1.186/1.1187 seconds
<6>[90412.059540] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90412.059639] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90412.059665] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90412.061332] (1)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90412.062427]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90412.062453] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90412.064620] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90412.070053] (0)[10823:Binder:636_2]noirq resume of devices complete after
9.537 msecs
<6>[90412.070313] (1)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(91)
<6>[90412.070499] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ttyC0
<4>[90412.070522] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90412.075256] (3)[10823:Binder:636_2]early resume of devices complete after
4.683 msecs
<5>[90412.075683] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90412.078704] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90412.079081] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90412.079117] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2629 us
<5>[90412.079379] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90412.079943] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90412.079970] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90412.080043] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90412.080075] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90412.080153] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90412.080337] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90412.080391] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90412.080413] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90412.080494] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90412.080534] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90412.080653] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90412.080677] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90412.080690] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90412.080832] (3)[10823:Binder:636_2]zcvf, no update time:8 96 avgc:0
avgc_thread
<5>[90412.080859] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90412.083818] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90412.084790] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90412.084880] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90412.085159] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90412.085193] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90412.085883] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90412.086037] (3)[25513:kworker/3:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90412.088051] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90412.088355] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90412.088723] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90412.089120] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90412.089253] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90412.091849] (2)[10823:Binder:636_2]resume of devices complete after 16.561
msecs
<3>[90412.095347] (2)[23427:kworker/2:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90412.095371] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90412.095990] (2)[23427:kworker/2:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90412.096011] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90412.096184] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90412.096202] (3)[1314:receiver]Restarting tasks ...
<6>[90412.102853] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90412.102937] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90412.103170] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90412.104340] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<4>[90412.115979] done.
<5>[90412.116010] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90412.116025] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90412.119201] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180519,9668,15406scp1 sleep state: 54753,23380,23380
<6>[90412.119220] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90412.119220]
<5>[90412.119228] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90412.119234] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90412.119245] -(2)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90412.119252] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90412.119413] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90412.120232] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90412.120603] -(6)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90412.121152] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90412.121192] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:15.080493109 UTC
<6>[90412.121364] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<36>[90412.121386] (0)[576:logd.auditd]type=1400 audit(1671082875.074:1623033):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90412.121444] (2)[23427:kworker/2:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90412.121453] (2)[23427:kworker/2:2]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90412.121471] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90412.121478] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90412.121495] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90412.121507] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90412.174872] (1)[7387:kworker/1:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90412.222583] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90412.222612] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90412.222640] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90412.222649] (1)[10823:Binder:636_2]active wakeup source: ttyC0
<3>[90412.283130] (3)[30078:kworker/3:3]typec_cc_orientation = 2
<6>[90412.332936] (1)[7387:kworker/1:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90412.436907] (3)[30078:kworker/3:3]chg_type = 0, hvdcp_type = 0
<6>[90412.493573] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90412.538307] (3)[30078:kworker/3:3]get_connector_temp: connector_temp:326
<6>[90412.538370] (3)[30078:kworker/3:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90412.538436] (3)[30078:kworker/3:3]mt_charger_plugin plugin:0
<6>[90412.702676] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90412.702720] (2)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90412.702850] (2)[23443:kworker/u16:5]PM: ++
<7>[90412.709085] (2)[23443:kworker/u16:5]PM: --
<4>[90412.810489] done.
<5>[90412.815499] -(1)[0:swapper/1]lvts_paused = 1
<5>[90412.818285] -(1)[0:swapper/1]lvts_paused = 1
<6>[90412.818800] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180537,9676,15420scp1 sleep state: 54755,23380,23380
<6>[90412.818828] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90412.818828]
<6>[90412.818852] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90412.818852]
<6>[90412.818874] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90412.818874]
<6>[90412.818896] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90412.818896]
<5>[90412.818917] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90412.818935] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90412.818968] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90412.818996] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90412.819283] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90412.819316] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:15.778626032 UTC
<6>[90412.819501] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90412.819558] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90412.819584] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90412.819606] (2)[613:teei_daemon]Freezing user space processes ...
<5>[90412.821133] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90412.821955] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90412.821977] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90412.845377] (elapsed 0.025 seconds) done.
<6>[90412.845410] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90412.845429] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.009 seconds) done.
<4>[90412.894960] (4)[7032:kworker/4:0]power_debug_work: start
<3>[90412.920799] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90412.920844] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90412.921003] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: ccci_fs
<6>[90412.921030] (1)[10823:Binder:636_2]suspend of devices aborted after 62.585
msecs
<3>[90412.921048] (1)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<6>[90412.922195] (1)[10823:Binder:636_2]resume of devices complete after 1.122
msecs
<3>[90412.927642] (1)[7387:kworker/1:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90412.927669] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90412.928298] (1)[7387:kworker/1:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90412.928321] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90412.928511] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90412.928532] (3)[1314:receiver]Restarting tasks ...
<6>[90412.937006] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90412.937123] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90412.937359] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90412.945614] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90412.945688] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90412.945828] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90412.945874] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90412.952685] done.
<5>[90412.952714] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90412.952734] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90412.956711] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90412.957532] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180540,9677,15431scp1 sleep state: 54757,23384,23384
<6>[90412.957566] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90412.957566]
<5>[90412.957589] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90412.957607] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90412.957631] -(1)[10823:Binder:636_2]Abort: Pending Wakeup Sources: ccci_fs
<5>[90412.957649] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90412.958773] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90412.959940] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90412.959984] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:15.919281801 UTC
<6>[90412.960180] (1)[7387:kworker/1:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:2><0x1cdb>
<36>[90412.960192] (3)[576:logd.auditd]type=1400 audit(1671082875.914:1623035):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90412.960318] (1)[7387:kworker/1:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90412.960336] (1)[7387:kworker/1:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90412.960382] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90412.960406] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90412.960426] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90412.960500] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90413.162108] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90413.191003] -(3)[0:swapper/3][bq27z561] fg_update_status:
SOC:59,Volt:3931,Cur:172,Temp:338,RM:2239,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90413.205082] -(3)[0:swapper/3]lvts_paused = 1
<5>[90413.205167] -(3)[0:swapper/3]Cnt= 10 LVTS TC 1, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<4>[90413.278716] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 727,
686, 654, 592, 457, 255, 184, 118, success counter cpu: 127, 68, 102, 79, 65, 45,
23, 13, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 238, 130,
189, 136, 198, 61, 30, 14, o: 0-2,4-7, p: , f: , t: 90413422020848,
90413500000000, 9223372036854775807, 90413422012233, 90413411837048,
90413623351848, 90413692000000, 90413628000000,
<6>[90413.406128] (1)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90413.406885] -(2)[2251:kworker/u17:4][ccci1/fsm]received MD status response
97610043
<6>[90413.407117] (1)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<6>[90413.499187] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90413.589629] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x10,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413589613269,15000000]
<6>[90413.589664] (4)[435:wdtk-4][thread:435][RT:90413589655423] 2022-12-15
05:41:16.548975 UTC;android time 2022-12-15 12:41:16.548975
<6>[90413.606377] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x30,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413606362731,14983251]
<6>[90413.630588] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x34,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413630560962,14959052]
<6>[90413.641838] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x36,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413641811116,14947803]
<6>[90413.642639] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x37,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413642620577,14946993]
<6>[90413.646130] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0x77,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413646118808,14943495]
<6>[90413.646305] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0x7f,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413646272346,14943341]
<6>[90413.646318] (7)[438:wdtk-7][wdk-k]
cpu=7,lbit=0xff,cbit=0xff,7,1,2667932697,90412819304037,90412959960037,
[90413646297500,14943316]
<6>[90413.918041] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90413.918088] (1)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90413.918213] (1)[7383:kworker/u16:6]PM: ++
<7>[90413.928371] (0)[7383:kworker/u16:6]PM: --
<6>[90413.983276] (1)[7387:kworker/1:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:2><0x1cdb>
<4>[90414.029474] done.
<6>[90414.037531] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180566,9687,15452scp1 sleep state: 54759,23384,23384
<6>[90414.037588] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90414.037588]
<6>[90414.037613] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90414.037613]
<6>[90414.037636] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90414.037636]
<6>[90414.037658] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90414.037658]
<5>[90414.037680] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90414.037699] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90414.037870] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90414.037901] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90414.038221] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90414.038256] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:16.997564801 UTC
<6>[90414.038464] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90414.038523] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90414.038550] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90414.038576] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90414.038661] (3)[576:logd.auditd]type=1400 audit(1671082876.994:1623036):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90414.040013] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90414.041572] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90414.041600] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90414.069003] (elapsed 0.030 seconds) done.
<6>[90414.069041] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90414.069062] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90414.155851] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90414.155906] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90414.155982] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90414.157505] (2)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90414.157685] (0)[7383:kworker/u16:6]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90414.157892] (3)[23436:kworker/u16:0]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90414.158182] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90414.158308] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90414.158343] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90414.159220] (0)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90414.159984] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90414.160000] (2)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90414.160020] (3)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<6>[90414.161151] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90414.161176] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90414.161207] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90414.162114] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217605345000000 to 2022/12/15 05:41:19 (now = 2022/12/15 05:41:16)
<5>[90414.162235] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:20 (1)
<5>[90414.165868] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90414.166321] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90414.166361] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90414.166372] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90414.166489] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90414.166533] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90414.166581] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90414.166581]
<6>[90414.166604] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90414.166604]
<6>[90414.166627] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90414.166627]
<6>[90414.166649] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90414.166649]
<6>[90414.166772] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90414.166815] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90414.166840] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90414.167513] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90414.167602] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90414.167840] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90414.168218] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90414.168240] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90414.168714] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90414.168733] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90414.169244] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90414.169605] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,885 us
<6>[90414.170583] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90414.170880] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90414.171012] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90414.171450] (0)[10823:Binder:636_2]suspend of devices complete after 85.067
msecs
<6>[90414.178623] (0)[10823:Binder:636_2]late suspend of devices complete after
7.142 msecs
<4>[90414.178651] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90414.184668]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90414.185297] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90414.185678] (0)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90414.186576] (0)[10823:Binder:636_2]noirq suspend of devices complete after
6.999 msecs
<6>[90414.186648] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90414.186648] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90414.186648] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90414.186732] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90414.186732] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90414.186732] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 46995, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6567fd, req_sta = 0x1c000ff 0x180000
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xa9d6400f, wlk_cntcv_h = 0x292, 26M_off_pct =
59
<6>[90414.186732] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x10
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 1.434 seconds
<4>[90414.186732] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90414.186732] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90414.186732] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90414.186732] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90414.186732] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90414.186732] -(0)[0:swapper/0]Call trace:
<4>[90414.186732] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90414.186732] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90414.186732] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90414.186732] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90414.186732] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90414.186732] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90414.186732] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90414.186732] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90414.186732] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90414.186732] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90414.186732] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90414.186732] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90414.186732] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90414.186732] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90414.186732] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90414.186732] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90414.186732] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90414.186732] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90414.186732] -(0)[0:swapper/0]---[ end trace 308173880bd0bf83 ]---
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 37142 (32k)
<4>[90414.186732] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 1.133/1.280/1.231/1.202/1.1280 seconds
<6>[90414.186732] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90414.186856] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90414.186899] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90414.186867] -(0)[0:swapper/0]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90414.188838] (3)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_resume
<5>[90414.190051]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90414.190077] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90414.192073] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90414.197678] (0)[10823:Binder:636_2]noirq resume of devices complete after
9.988 msecs
<6>[90414.198050] (2)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(92)
<6>[90414.198239] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90414.198265] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90414.203362] (0)[10823:Binder:636_2]early resume of devices complete after
5.049 msecs
<5>[90414.203795] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90414.205783] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90414.206089] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90414.206127] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1538 us
<5>[90414.206399] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90414.207026] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90414.207053] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90414.207128] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90414.207159] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90414.207241] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90414.207429] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90414.207491] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90414.207514] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90414.207600] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90414.207641] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90414.207763] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90414.207788] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90414.207801] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90414.207944] (0)[10823:Binder:636_2]zcvf, no update time:11 96 avgc:0
avgc_thread
<5>[90414.207971] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90414.211394] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90414.212404] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90414.212497] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90414.212815] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90414.212848] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90414.213522] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90414.213678] (3)[2356:kworker/3:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90414.215759] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90414.216354] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90414.217069] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90414.217326] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90414.217427] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90414.220112] (2)[10823:Binder:636_2]resume of devices complete after 16.718
msecs
<3>[90414.224226] (2)[7519:kworker/2:4]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90414.224253] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90414.225009] (2)[7519:kworker/2:4]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90414.225032] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90414.225258] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90414.225279] (4)[1315:receiver]Restarting tasks ...
<6>[90414.233362] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90414.233651] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90414.233858] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90414.234590] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217605345000000
<12>[90414.240475] (1)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<12>[90414.240527] (1)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<4>[90414.247408] done.
<5>[90414.247433] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90414.247448] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90414.249037] (1)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<5>[90414.250613] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90414.252750] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180606,9703,15495scp1 sleep state: 54761,23386,23386
<6>[90414.252772] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90414.252772]
<5>[90414.252785] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90414.252795] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90414.252877] -(3)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90414.252890] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90414.253876] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90414.254220] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90414.255580] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90414.255617] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:18.652580877 UTC
<6>[90414.255790] (1)[7387:kworker/1:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:2><0x1cdb>
<6>[90414.255858] (1)[7387:kworker/1:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90414.255870] (1)[7387:kworker/1:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90414.255992] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90414.256011] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90414.256027] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90414.256444] (3)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0200c0e] wf
<36>[90414.256782] (3)[576:logd.auditd]type=1400 audit(1671082878.647:1623037):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<12>[90414.264149] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<12>[90414.264229] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<12>[90414.269986] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<12>[90414.279524] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<12>[90414.279595] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<12>[90414.290555] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<12>[90414.295260] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=40 fc=4110000 cc=670 chg=
<3>[90414.302193] (3)[2356:kworker/3:5]typec_cc_orientation = 2
<6>[90414.357396] (5)[10823:Binder:636_2]active wakeup source: main
<6>[90414.357426] (5)[10823:Binder:636_2]active wakeup source: usb
<6>[90414.357464] (5)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90414.403076] (4)[1656:watchdog]AEEIOCTL_RT_MON_Kick ( 300)
<6>[90414.403110] (4)[1656:watchdog][Hang_Detect] hang_detect enabled 10
<3>[90414.407886] (3)[2356:kworker/3:5]chg_type = 0, hvdcp_type = 0
<6>[90414.460059] (2)[23427:kworker/2:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90414.507277] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90414.514758] (3)[2356:kworker/3:5]get_connector_temp: connector_temp:326
<6>[90414.514799] (3)[2356:kworker/3:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90414.514862] (3)[2356:kworker/3:5]mt_charger_plugin plugin:0
<6>[90414.565488] (2)[23427:kworker/2:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90414.775743] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217631127000000
<5>[90414.782305] -(1)[1893:AlarmManager]alarmtimer_enqueue, 217631127000000
<6>[90414.826657] -(0)[4678:lowpool[160]][ccci1/dpmaif]tx0_resume_tx: 0x80000,
0x40000, 0x0
<6>[90414.826727] -(3)[4028:ndroid.systemui][ccci1/dpmaif]wake up by MD0 HIF
L2(8400/0)(3e0/0)!
<6>[90414.827058] -(2)[1877:jobscheduler.bg][ccci1/dpmaif]wake up by MD0 HIF
L2(21/0)(3e0/0)!
<6>[90414.827093] -(2)[1877:jobscheduler.bg][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x40000, 0x0
<6>[90414.827739] (2)[1307:dpmaif_txq0_don][ccci1/dpmaif]DPMA_MD wakeup source:
(0/2)
<5>[90414.829164] -(0)[1868:Binder:1454_4]alarmtimer_enqueue, 217631127000000
<6>[90414.878147] (5)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90414.878174] (6)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90414.878279] (6)[23437:kworker/u16:3]PM: ++
<7>[90414.883889] (6)[23437:kworker/u16:3]PM: --
<5>[90414.946009] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90414.946069] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90414.946099] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90414.946118] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<4>[90414.986698] done.
<6>[90415.012343] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180624,9716,15522scp1 sleep state: 54763,23386,23386
<6>[90415.012392] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90415.012392]
<6>[90415.012416] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90415.012416]
<6>[90415.012439] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90415.012439]
<6>[90415.012460] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90415.012460]
<5>[90415.012482] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90415.012500] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90415.012532] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90415.012573] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90415.012908] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90415.012941] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:19.409914723 UTC
<6>[90415.013130] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90415.013187] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90415.013214] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90415.013238] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90415.013357] (2)[576:logd.auditd]type=1400 audit(1671082879.403:1623038):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90415.014685] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90415.016052] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90415.016080] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90415.041129] (elapsed 0.027 seconds) done.
<6>[90415.041166] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90415.041186] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90415.098409] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90415.098459] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90415.098526] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90415.099943] (1)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90415.100304] (1)[19178:kworker/u16:2]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<3>[90415.100437] (0)[25368:kworker/u16:9][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<5>[90415.100509] (0)[25368:kworker/u16:9]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90415.100815] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90415.100840] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90415.101694] (1)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90415.102608] (1)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90415.102652] (0)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90415.102682] (1)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<6>[90415.103470] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90415.103497] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90415.103525] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90415.104260] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217631127000000 to 2022/12/15 05:41:45 (now = 2022/12/15 05:41:19)
<5>[90415.104377] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:46 (1)
<5>[90415.107979] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90415.108416] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90415.108453] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90415.108464] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90415.108567] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90415.108606] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90415.108650] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90415.108650]
<6>[90415.108672] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90415.108672]
<6>[90415.108694] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90415.108694]
<6>[90415.108715] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90415.108715]
<6>[90415.108832] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90415.108876] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90415.108900] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90415.109515] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90415.109597] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90415.109887] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90415.110234] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90415.110256] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90415.110682] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90415.110701] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90415.111148] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90415.111486] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,797 us
<6>[90415.112381] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90415.112671] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90415.112793] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90415.113196] (2)[10823:Binder:636_2]suspend of devices complete after 57.033
msecs
<6>[90415.119112] (2)[10823:Binder:636_2]late suspend of devices complete after
5.887 msecs
<4>[90415.119140] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90415.125064]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90415.125768] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90415.126146] (2)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90415.126934] (2)[10823:Binder:636_2]noirq suspend of devices complete after
6.970 msecs
<6>[90415.127004] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90415.127004] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90415.127004] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90415.127081] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90415.127081] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90415.127081] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90415.127081] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90415.127081] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90415.127081] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 20489, r13 = 0xc400f9bc, debug_flag =
0xf8040300 0x40000002, connectivity not sleep, modem not sleep, subsys not sleep
r12 = 0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6163fb,
req_sta = 0x1c3d0ff 0x0 0x7c000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0,
raw_ext_sta = 0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000
0xc38000, req = 0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0xab0d60a0, wlk_cntcv_h =
0x292, 26M_off_pct = 0
<6>[90415.127081] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x0
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 0.625 seconds
<4>[90415.127081] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90415.127081] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90415.127081] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90415.127081] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90415.127081] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90415.127081] -(2)[0:swapper/2]Call trace:
<4>[90415.127081] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90415.127081] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90415.127081] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90415.127081] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90415.127081] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90415.127081] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90415.127081] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90415.127081] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90415.127081] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90415.127081] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90415.127081] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90415.127081] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90415.127081] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90415.127081] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90415.127081] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90415.127081] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90415.127081] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90415.127081] -(2)[0:swapper/2]---[ end trace 308173880bd0bf84 ]---
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90415.127081] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/0.368/0.150/0.149/1.1000 seconds
<6>[90415.127081] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90415.127180] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90415.127204] -(2)[0:swapper/2]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90415.129087] (2)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90415.130197]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90415.130220] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90415.132427] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90415.138066] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.964 msecs
<6>[90415.138244] -(3)[0:swapper/3][ccci1/dpmaif]wake up by MD0 HIF L2(20/1)
(3e0/0)!
<6>[90415.138297] (3)[0:swapper/3][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90415.138963] -(2)[10823:Binder:636_2][ccci1/dpmaif]tx1_resume_tx: 0x40000,
0x40000, 0x0
<6>[90415.139041] -(2)[10823:Binder:636_2][ccci1/dpmaif]clear txq1_resume_done:
0x40000, 0x40000, 0x0
<6>[90415.139119] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccmni_md1
<4>[90415.139141] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90415.144441] (2)[10823:Binder:636_2]early resume of devices complete after
5.252 msecs
<5>[90415.144869] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90415.147945] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90415.148240] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90415.148274] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2410 us
<5>[90415.148541] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90415.149050] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90415.149076] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90415.149148] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90415.149179] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90415.149255] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90415.149437] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90415.149491] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90415.149513] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90415.149593] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90415.149634] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90415.150207] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90415.150236] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90415.150250] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90415.150394] (2)[10823:Binder:636_2]zcvf, no update time:13 96 avgc:0
avgc_thread
<5>[90415.150422] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90415.153332] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90415.154429] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90415.154518] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90415.154803] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90415.154836] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90415.155491] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90415.155668] (2)[30082:kworker/2:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90415.157939] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90415.158509] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90415.159096] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90415.159768] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90415.159875] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90415.162755] (3)[10823:Binder:636_2]resume of devices complete after 18.282
msecs
<6>[90415.166024] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90415.166050] (3)[23446:kworker/3:1]Restarting tasks ...
<3>[90415.166647] (3)[23446:kworker/3:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90415.166682] (3)[23446:kworker/3:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90415.167355] (3)[23446:kworker/3:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90415.167375] (3)[23446:kworker/3:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90415.172413] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90415.172447] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90415.172538] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90415.172995] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217631127000000
<4>[90415.183914] done.
<5>[90415.183940] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90415.183956] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90415.187289] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90415.188471] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180647,9725,15551scp1 sleep state: 54765,23390,23390
<6>[90415.188501] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90415.188501]
<5>[90415.188519] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90415.188532] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90415.188552] -(1)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90415.188567] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90415.189485] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90415.189658] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90415.190405] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90415.190441] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:20.215375261 UTC
<6>[90415.190585] (1)[7387:kworker/1:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:2><0x1cdb>
<6>[90415.190669] (1)[7387:kworker/1:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90415.190680] (1)[7387:kworker/1:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90415.190709] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90415.190725] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90415.190738] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90415.190921] (3)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90415.191393] (3)[576:logd.auditd]type=1400 audit(1671082880.212:1623039):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<3>[90415.247429] (2)[30082:kworker/2:1]typec_cc_orientation = 2
<6>[90415.292644] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90415.292688] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90415.292730] (1)[10823:Binder:636_2]active wakeup source: ccmni_md1
<6>[90415.352773] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90415.405604] (2)[30082:kworker/2:1]chg_type = 0, hvdcp_type = 0
<6>[90415.455973] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90415.515824] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90415.608443] (2)[30082:kworker/2:1]get_connector_temp: connector_temp:326
<6>[90415.608495] (2)[30082:kworker/2:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90415.608543] (2)[30082:kworker/2:1]mt_charger_plugin plugin:0
<6>[90416.158080] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90416.158123] (2)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90416.158247] (2)[23443:kworker/u16:5]PM: ++
<7>[90416.167289] (3)[23443:kworker/u16:5]PM: --
<6>[90416.222127] (1)[7387:kworker/1:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:2><0x1cdb>
<6>[90416.238355] (2)[7519:kworker/2:4][bq27z561] fg_update_status:
SOC:59,Volt:3928,Cur:179,Temp:339,RM:2238,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90416.238520] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90416.239391] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90416.240078] (0)[118:pd_dbg_info]///PD dbg info 128d
<5>[90416.240103] (0)[118:pd_dbg_info]<90416.239>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90416.240103] <90416.239>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90416.248093] (2)[30082:kworker/2:1]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<4>[90416.265818] done.
<6>[90416.271545] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180669,9740,15577scp1 sleep state: 54767,23390,23390
<6>[90416.271583] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90416.271583]
<6>[90416.271609] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90416.271609]
<6>[90416.271632] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90416.271632]
<6>[90416.271654] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90416.271654]
<5>[90416.271675] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90416.271693] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90416.271726] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90416.271754] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90416.272000] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90416.272032] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:21.296975030 UTC
<6>[90416.272589] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90416.272651] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90416.272677] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90416.272700] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90416.272889] (3)[576:logd.auditd]type=1400 audit(1671082881.292:1623040):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90416.273845] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90416.275280] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90416.275308] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90416.294433] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: NETLINK
<3>[90416.294471] (2)[10823:Binder:636_2]Freezing of tasks aborted after 0.021
seconds
<6>[90416.294493] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90416.294509] (0)[1315:receiver]Restarting tasks ...
<6>[90416.300894] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90416.302210] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90416.302271] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90416.311607] done.
<5>[90416.311635] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90416.311644] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90416.315609] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90416.316584] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180673,9746,15596scp1 sleep state: 54769,23390,23390
<6>[90416.316615] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90416.316615]
<5>[90416.316635] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90416.316650] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90416.316672] -(2)[10823:Binder:636_2]Abort: Pending Wakeup Sources: NETLINK
<5>[90416.316689] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90416.319018] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90416.319810] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90416.319852] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:21.344781184 UTC
<6>[90416.320057] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<36>[90416.320071] (3)[576:logd.auditd]type=1400 audit(1671082881.340:1623041):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90416.320170] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90416.320184] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90416.320221] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90416.320241] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90416.320260] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90416.320480] -(6)[0:swapper/6]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<5>[90416.355520] -(6)[0:swapper/6]lvts_paused = 1
<5>[90416.355582] -(6)[0:swapper/6]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90416.521804] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90416.521845] (0)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90416.522070] (0)[23443:kworker/u16:5]PM: ++
<6>[90416.524945] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<7>[90416.530166] (2)[23443:kworker/u16:5]PM: --
<4>[90416.630442] done.
<5>[90416.635732] -(2)[0:swapper/2]lvts_paused = 1
<5>[90416.635806] -(2)[0:swapper/2]Cnt= 10 LVTS TC 1, LVTSMSRCTL1[10,7,0] = 1,0,0,
LVTSMSRCTL1[10:0] = 0x4
<6>[90416.637411] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180680,9752,15613scp1 sleep state: 54771,23390,23390
<6>[90416.637442] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90416.637442]
<6>[90416.637466] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90416.637466]
<6>[90416.637489] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90416.637489]
<6>[90416.637510] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90416.637510]
<5>[90416.637532] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90416.637550] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90416.637582] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90416.637610] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90416.638231] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90416.638267] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:21.663208876 UTC
<6>[90416.638450] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90416.638507] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90416.638534] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90416.638558] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90416.638727] (3)[576:logd.auditd]type=1400 audit(1671082881.660:1623042):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90416.639775] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<4>[90416.664926] (elapsed 0.026 seconds) done.
<6>[90416.664962] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90416.664980] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90416.720961] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90416.721011] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90416.721079] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90416.722481] (2)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90416.723059] (3)[23436:kworker/u16:0]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90416.723240] (0)[23438:kworker/u16:4]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90416.723792] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90416.723903] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90416.723938] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90416.724627] (2)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90416.724773] (0)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<3>[90416.724842] (3)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90416.724925] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90416.726266] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90416.726304] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90416.726332] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90416.727088] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217631127000000 to 2022/12/15 05:41:45 (now = 2022/12/15 05:41:21)
<5>[90416.727253] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:46 (1)
<5>[90416.730526] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90416.730929] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90416.730966] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90416.730976] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90416.731082] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90416.731123] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90416.731169] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90416.731169]
<6>[90416.731191] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90416.731191]
<6>[90416.731214] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90416.731214]
<6>[90416.731236] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90416.731236]
<6>[90416.731351] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90416.731394] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90416.731417] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90416.732019] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90416.732102] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90416.732326] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90416.732671] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90416.732693] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90416.733116] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90416.733134] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90416.733627] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90416.733926] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,804 us
<6>[90416.734730] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90416.734992] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90416.735116] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90416.735512] (0)[10823:Binder:636_2]suspend of devices complete after 55.915
msecs
<6>[90416.740903] (0)[10823:Binder:636_2]late suspend of devices complete after
5.362 msecs
<4>[90416.740930] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90416.745484]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90416.746320] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90416.746670] (2)[25368:kworker/u16:9]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90416.747391] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.766 msecs
<6>[90416.747472] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90416.747472] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90416.747472] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<6>[90416.747550] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90416.747550] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90416.747550] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90416.747550] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90416.747550] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90416.747550] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 96159, r13 = 0xc40019ac, debug_flag = 0xf8040330
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767f9, req_sta = 0x1c000ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xae9578fc, wlk_cntcv_h = 0x292, 26M_off_pct = 0
<6>[90416.747550] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x10
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 2.934 seconds
<4>[90416.747550] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90416.747550] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90416.747550] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90416.747550] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90416.747550] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90416.747550] -(0)[0:swapper/0]Call trace:
<4>[90416.747550] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90416.747550] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90416.747550] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90416.747550] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90416.747550] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90416.747550] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90416.747550] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90416.747550] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90416.747550] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90416.747550] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90416.747550] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90416.747550] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90416.747550] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90416.747550] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90416.747550] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90416.747550] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90416.747550] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90416.747550] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90416.747550] -(0)[0:swapper/0]---[ end trace 308173880bd0bf85 ]---
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 2171 (32k)
<4>[90416.747550] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.066/0.849/2.057/0.218/2.2970 seconds
<6>[90416.747550] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90416.747659] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90416.747683] -(0)[0:swapper/0]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90416.750111] (2)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_resume
<5>[90416.751036]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90416.751059] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90416.753223] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90416.758888] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.255 msecs
<6>[90416.759195] (1)[2251:kworker/u17:4][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(93)
<6>[90416.759363] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90416.759386] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90416.764529] (2)[10823:Binder:636_2]early resume of devices complete after
5.089 msecs
<5>[90416.764965] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90416.767928] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90416.768224] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90416.768261] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2632 us
<5>[90416.768529] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90416.768870] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90416.768895] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90416.768970] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90416.769001] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90416.769078] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90416.769267] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90416.769323] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90416.769346] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90416.769426] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90416.769468] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90416.769591] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90416.769616] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90416.769630] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90416.769846] (2)[10823:Binder:636_2]zcvf, no update time:17 96 avgc:0
avgc_thread
<5>[90416.769876] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90416.771634] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90416.772679] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90416.772771] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90416.773056] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90416.773089] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90416.773844] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90416.774019] (2)[26031:kworker/2:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90416.776075] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90416.776428] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90416.776720] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90416.777341] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90416.778590] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90416.780795] (1)[10823:Binder:636_2]resume of devices complete after 16.234
msecs
<3>[90416.785043] (1)[7387:kworker/1:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90416.785069] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90416.785646] (1)[7387:kworker/1:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90416.785802] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90416.785983] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90416.786001] (4)[0:swapper/4]Restarting tasks ...
<6>[90416.789773] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 96159, r13 = 0xc40019ac, debug_flag = 0xf8040330
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767f9, req_sta = 0x1c000ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90416.789816] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90416.791403] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90416.791416] (2)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90416.791598] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90416.792042] -(6)[1893:AlarmManager]alarmtimer_enqueue: 2 callbacks suppressed
<5>[90416.792050] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217631127000000
<4>[90416.802370] done.
<5>[90416.802402] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90416.802419] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90416.806337] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90416.806543] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180752,9794,15674scp1 sleep state: 54773,23390,23390
<6>[90416.806560] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90416.806560]
<5>[90416.806572] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90416.806581] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90416.806596] -(2)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90416.806607] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90416.807407] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90416.807585] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90416.808236] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90416.808273] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:24.770578106 UTC
<6>[90416.808435] (2)[7519:kworker/2:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:4><0x1d5f>
<36>[90416.808452] (3)[576:logd.auditd]type=1400 audit(1671082884.765:1623043):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90416.808518] (2)[7519:kworker/2:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90416.808530] (2)[7519:kworker/2:4]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90416.808551] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90416.808563] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90416.808586] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90416.808601] (2)[10823:Binder:636_2]PM: suspend exit
<3>[90416.861903] (2)[7306:kworker/2:3]typec_cc_orientation = 2
<6>[90416.913838] (5)[10823:Binder:636_2]active wakeup source: main
<6>[90416.913868] (5)[10823:Binder:636_2]active wakeup source: usb
<6>[90416.913903] (5)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90416.913917] (5)[10823:Binder:636_2]active wakeup source: ttyC0
<5>[90416.946260] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90416.946329] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90416.946362] (0)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90416.946387] (0)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90416.947000] (0)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90416.966989] (2)[26031:kworker/2:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90417.016431] (2)[7306:kworker/2:3]chg_type = 0, hvdcp_type = 0
<3>[90417.072495] (2)[7306:kworker/2:3]get_connector_temp: connector_temp:326
<6>[90417.072545] (2)[7306:kworker/2:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90417.072592] (2)[7306:kworker/2:3]mt_charger_plugin plugin:0
<6>[90417.124727] (2)[26031:kworker/2:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90417.288343] -(2)[0:swapper/2]lvts_paused = 1
<5>[90417.288418] -(2)[0:swapper/2]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90417.533530] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90417.534120] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90417.534146] (0)[23436:kworker/u16:0]PM: Syncing filesystems ...
<7>[90417.534277] (0)[23436:kworker/u16:0]PM: ++
<7>[90417.542949] (1)[23436:kworker/u16:0]PM: --
<4>[90417.642841] done.
<6>[90417.649444] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180771,9802,15689scp1 sleep state: 54775,23390,23390
<6>[90417.649491] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90417.649491]
<6>[90417.649515] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90417.649515]
<6>[90417.649538] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90417.649538]
<6>[90417.649560] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90417.649560]
<5>[90417.649581] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90417.649599] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90417.649632] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90417.649660] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<36>[90417.650364] (3)[576:logd.auditd]type=1400 audit(1671082885.609:1623044):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90417.650753] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90417.650788] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:25.613104876 UTC
<6>[90417.650955] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90417.651011] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90417.651038] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90417.651061] (1)[613:teei_daemon]Freezing user space processes ...
<5>[90417.652243] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90417.653521] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90417.653549] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90417.677349] (elapsed 0.026 seconds) done.
<6>[90417.677383] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90417.677401] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90417.734632] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90417.734681] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90417.734749] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90417.736154] (2)[23436:kworker/u16:0]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90417.736236] (3)[23438:kworker/u16:4]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90417.736412] (0)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90417.736792] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90417.736910] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90417.736946] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90417.737851] (2)[23436:kworker/u16:0][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90417.738640] (2)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90417.738667] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90417.738704] (4)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<6>[90417.739560] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90417.739587] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90417.739616] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90417.740371] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217631127000000 to 2022/12/15 05:41:45 (now = 2022/12/15 05:41:25)
<5>[90417.740488] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:46 (1)
<5>[90417.744067] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90417.744492] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90417.744528] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90417.744538] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90417.744637] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90417.744675] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90417.744718] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90417.744718]
<6>[90417.744740] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90417.744740]
<6>[90417.744762] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90417.744762]
<6>[90417.744783] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90417.744783]
<6>[90417.744888] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90417.744926] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90417.744949] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90417.745513] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90417.745593] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90417.745881] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90417.746210] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90417.746231] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90417.746620] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90417.746638] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90417.747071] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90417.747390] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,764 us
<6>[90417.748291] (3)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 00020002
<6>[90417.748543] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90417.748660] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90417.749035] (3)[10823:Binder:636_2]suspend of devices complete after 57.326
msecs
<6>[90417.755720] (3)[10823:Binder:636_2]late suspend of devices complete after
6.656 msecs
<4>[90417.755748] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90417.761408]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90417.762102] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90417.762480] (3)[25368:kworker/u16:9]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90417.763249] (3)[10823:Binder:636_2]noirq suspend of devices complete after
6.864 msecs
<6>[90417.763319] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90417.763319] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90417.763319] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90417.763391] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90417.763391] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90417.763391] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90417.763391] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90417.763391] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90417.763391] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 81073, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6163f9, req_sta = 0x1c000ff 0x180000
0x7c000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xb14a75ef, wlk_cntcv_h = 0x292, 26M_off_pct = 0
<6>[90417.763391] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 2.474 seconds
<4>[90417.763391] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90417.763391] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90417.763391] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90417.763391] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90417.763391] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90417.763391] -(3)[0:swapper/3]Call trace:
<4>[90417.763391] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90417.763391] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90417.763391] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90417.763391] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90417.763391] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90417.763391] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90417.763391] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90417.763391] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90417.763391] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90417.763391] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90417.763391] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90417.763391] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90417.763391] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90417.763391] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90417.763391] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90417.763391] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90417.763391] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90417.763391] -(3)[0:swapper/3]---[ end trace 308173880bd0bf86 ]---
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 906 (32k)
<4>[90417.763391] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.027/1.186/2.873/0.322/3.3002 seconds
<6>[90417.763391] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90417.763517] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90417.763560] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90417.763526] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90417.765636] (3)[25368:kworker/u16:9]mtu3_phone musb-hdrc: mtu3_resume
<5>[90417.766720]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90417.767048] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90417.769014] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90417.774616] (0)[10823:Binder:636_2]noirq resume of devices complete after
10.153 msecs
<6>[90417.774904] (3)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(94)
<6>[90417.775197] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90417.775222] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90417.780478] (0)[10823:Binder:636_2]early resume of devices complete after
5.202 msecs
<5>[90417.781330] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90417.783224] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90417.783580] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90417.783616] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1514 us
<5>[90417.784325] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90417.784671] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90417.784696] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90417.784771] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90417.784803] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90417.784884] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90417.785073] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90417.785131] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90417.785154] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90417.785240] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90417.785281] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90417.785856] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90417.785887] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90417.785900] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90417.786043] (3)[10823:Binder:636_2]zcvf, no update time:21 96 avgc:0
avgc_thread
<5>[90417.786070] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90417.789140] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90417.790185] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90417.790276] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90417.790568] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90417.790603] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90417.791445] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90417.791613] (3)[23446:kworker/3:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90417.793452] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90417.793935] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90417.794037] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90417.794131] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90417.794276] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90417.796817] (0)[10823:Binder:636_2]resume of devices complete after 16.307
msecs
<3>[90417.800463] (0)[25356:kworker/0:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90417.800488] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90417.801108] (0)[25356:kworker/0:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90417.801130] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90417.801317] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90417.801335] (7)[1315:receiver]Restarting tasks ...
<6>[90417.806965] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90417.807557] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217631127000000
<6>[90417.807628] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90417.807742] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90417.820453] done.
<5>[90417.820480] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90417.820491] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90417.824284] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90417.828527] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180836,9833,15746scp1 sleep state: 54777,23393,23393
<6>[90417.828551] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90417.828551]
<5>[90417.828561] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90417.828570] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90417.828585] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90417.828595] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90417.829425] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90417.829604] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90417.830288] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90417.830326] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:28.270346106 UTC
<6>[90417.830511] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90417.830595] (0)[25356:kworker/0:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90417.830607] (0)[25356:kworker/0:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90417.830636] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90417.830654] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90417.830670] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90417.831610] (1)[7386:kworker/1:0]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<3>[90417.879711] (1)[7386:kworker/1:0]typec_cc_orientation = 2
<6>[90417.931978] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90417.932020] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90417.932058] (2)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90417.989304] (1)[25366:kworker/1:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90418.041305] (1)[7386:kworker/1:0]chg_type = 0, hvdcp_type = 0
<6>[90418.091774] (1)[25366:kworker/1:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90418.248715] (1)[7386:kworker/1:0]get_connector_temp: connector_temp:326
<6>[90418.248779] (1)[7386:kworker/1:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90418.248844] (1)[7386:kworker/1:0]mt_charger_plugin plugin:0
<4>[90418.281772] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 742,
738, 510, 607, 431, 192, 171, 98, success counter cpu: 91, 93, 73, 105, 53, 23, 18,
6, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 189, 177, 150,
202, 224, 40, 26, 8, o: 2,4-7, p: , f: 3, t: 90418412000000, 90418412000000,
90418415570080, 90418408000000, 90418417743742, 90418812000000, 90418516202309,
90418620000000,
<6>[90418.399229] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90418.399274] (2)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90418.399471] (2)[23443:kworker/u16:5]PM: ++
<7>[90418.407121] (2)[23443:kworker/u16:5]PM: --
<4>[90418.506960] done.
<6>[90418.513926] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10180852,9845,15768scp1 sleep state: 54779,23393,23393
<6>[90418.513977] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90418.513977]
<6>[90418.514002] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90418.514002]
<6>[90418.514025] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90418.514025]
<6>[90418.514047] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90418.514047]
<5>[90418.514069] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90418.514087] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90418.514122] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90418.514151] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90418.514439] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90418.514472] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:28.954502722 UTC
<36>[90418.514935] (3)[576:logd.auditd]type=1400 audit(1671082888.951:1623046):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90418.515363] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90418.515417] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90418.515445] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90418.515469] (0)[613:teei_daemon]Freezing user space processes ...
<5>[90418.516697] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90418.517808] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90418.517822] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90418.541550] (elapsed 0.026 seconds) done.
<6>[90418.541585] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90418.541604] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90418.600203] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90418.600252] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90418.600319] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90418.601800] (2)[23438:kworker/u16:4]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90418.601975] (1)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90418.602092] (0)[19178:kworker/u16:2]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90418.602486] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90418.602599] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90418.602635] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90418.603674] (2)[23438:kworker/u16:4][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90418.604334] (2)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<3>[90418.604351] (0)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90418.604479] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90418.605466] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90418.605492] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90418.605520] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90418.606416] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217631127000000 to 2022/12/15 05:41:44 (now = 2022/12/15 05:41:28)
<5>[90418.606537] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:45 (1)
<5>[90418.610177] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90418.610582] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90418.610619] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90418.610630] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90418.610733] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90418.610774] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90418.610820] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90418.610820]
<6>[90418.610842] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90418.610842]
<6>[90418.610864] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90418.610864]
<6>[90418.610886] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90418.610886]
<6>[90418.610997] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90418.611038] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90418.611061] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90418.611665] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90418.611748] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90418.611972] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90418.612316] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90418.612338] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90418.612767] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90418.612785] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90418.613295] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90418.613636] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,864 us
<6>[90418.614543] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90418.614817] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90418.614941] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90418.615327] (2)[10823:Binder:636_2]suspend of devices complete after 58.980
msecs
<6>[90418.620985] (2)[10823:Binder:636_2]late suspend of devices complete after
5.628 msecs
<4>[90418.621012] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90418.626926]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90418.627552] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90418.627928] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90418.628707] (2)[10823:Binder:636_2]noirq suspend of devices complete after
6.763 msecs
<6>[90418.628777] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90418.628777] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90418.628777] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90418.628850] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90418.628850] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90418.628850] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90418.628850] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90418.628850] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90418.628850] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 208074, r13 = 0xc40019ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6367ff, req_sta =
0x1c000ff 0x0 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0xb6e270db, wlk_cntcv_h = 0x292,
26M_off_pct = 30
<6>[90418.628850] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x0
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 6.349 seconds
<4>[90418.628850] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90418.628850] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90418.628850] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90418.628850] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90418.628850] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90418.628850] -(2)[0:swapper/2]Call trace:
<4>[90418.628850] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90418.628850] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90418.628850] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90418.628850] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90418.628850] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90418.628850] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90418.628850] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90418.628850] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90418.628850] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90418.628850] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90418.628850] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90418.628850] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90418.628850] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90418.628850] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90418.628850] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90418.628850] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90418.628850] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90418.628850] -(2)[0:swapper/2]---[ end trace 308173880bd0bf87 ]---
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 57032 (32k)
<4>[90418.628850] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 1.740/4.923/6.935/2.624/7.7013 seconds
<6>[90418.628850] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90418.628976] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90418.629020] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90418.628986] -(2)[0:swapper/2]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90418.631108] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90418.632080]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90418.632103] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90418.634302] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90418.639838] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.892 msecs
<6>[90418.640009] -(3)[0:swapper/3][ccci1/dpmaif]wake up by MD0 HIF L2(0/1)(3e0/0)!
<6>[90418.640061] (3)[0:swapper/3][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90418.640585] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccmni_md1
<4>[90418.640611] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90418.641075] (1)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(95)
<6>[90418.645592] (2)[10823:Binder:636_2]early resume of devices complete after
4.927 msecs
<5>[90418.646089] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90418.648021] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90418.648371] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90418.648409] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1532 us
<5>[90418.648679] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90418.649254] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90418.649282] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90418.649358] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90418.649390] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90418.649471] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90418.649726] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90418.649786] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90418.649810] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90418.649892] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90418.649932] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90418.650050] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90418.650074] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90418.650087] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90418.650227] (2)[10823:Binder:636_2]zcvf, no update time:28 96 avgc:0
avgc_thread
<5>[90418.650254] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90418.653457] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90418.654677] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90418.654769] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90418.655065] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90418.655099] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90418.655732] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90418.655896] (2)[7519:kworker/2:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90418.658162] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90418.658469] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90418.658769] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90418.659486] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90418.660249] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90418.662655] (0)[10823:Binder:636_2]resume of devices complete after 17.029
msecs
<3>[90418.666874] (0)[25356:kworker/0:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90418.666899] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90418.667531] (0)[25356:kworker/0:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90418.667552] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90418.667915] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90418.667935] (4)[1314:receiver]Restarting tasks ...
<6>[90418.674778] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90418.674917] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90418.674971] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90418.676203] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217631127000000
<6>[90418.680288] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90418.681941] -(2)[6219:Thread-7][ccci1/dpmaif]tx1_resume_tx: 0x40000, 0x40000,
0x0
<6>[90418.682039] -(1)[522:ueventd][ccci1/dpmaif]clear txq1_resume_done: 0x40000,
0x40000, 0x0
<4>[90418.686905] done.
<5>[90418.686918] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90418.686927] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90418.691297] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90418.695655] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181005,9920,15870scp1 sleep state: 54781,23393,23393
<6>[90418.695677] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90418.695677]
<5>[90418.695692] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90418.695704] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90418.695723] -(0)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90418.695736] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90418.696809] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90418.697169] -(2)[406:EEMG_CTRL_GPU][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90418.697898] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90418.697934] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:35.491438644 UTC
<6>[90418.698078] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<36>[90418.698117] (1)[576:logd.auditd]type=1400 audit(1671082895.490:1623047):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90418.698139] (0)[25356:kworker/0:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90418.698149] (0)[25356:kworker/0:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90418.698175] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90418.699339] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90418.699364] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90418.699378] (0)[10823:Binder:636_2]PM: suspend exit
<3>[90418.745372] (2)[23427:kworker/2:2]typec_cc_orientation = 2
<6>[90418.800550] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90418.800590] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90418.800631] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90418.800650] (0)[10823:Binder:636_2]active wakeup source: ccmni_md1
<3>[90418.853841] (2)[23427:kworker/2:2]chg_type = 0, hvdcp_type = 0
<6>[90418.905031] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90418.946877] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90418.946957] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90418.947011] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90418.947053] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<3>[90418.955819] (2)[23427:kworker/2:2]get_connector_temp: connector_temp:326
<6>[90418.955880] (2)[23427:kworker/2:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90418.955939] (2)[23427:kworker/2:2]mt_charger_plugin plugin:0
<6>[90419.010307] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90419.649461] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90419.649508] (1)[2328:kworker/u16:1]PM: Syncing filesystems ...
<7>[90419.649760] (1)[2328:kworker/u16:1]PM: ++
<7>[90419.659224] (1)[2328:kworker/u16:1]PM: --
<6>[90419.690160] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90419.710005] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<4>[90419.754025] done.
<6>[90419.760019] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181033,9935,15891scp1 sleep state: 54783,23395,23395
<6>[90419.760064] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90419.760064]
<6>[90419.760089] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90419.760089]
<6>[90419.760113] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90419.760113]
<6>[90419.760135] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90419.760135]
<5>[90419.760158] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90419.760176] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90419.760211] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90419.760241] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90419.760529] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90419.760564] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:36.554077721 UTC
<6>[90419.760762] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90419.760820] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90419.761062] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90419.761090] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90419.762159] (1)[576:logd.auditd]type=1400 audit(1671082896.550:1623048):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90419.762552] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90419.764250] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90419.764285] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90419.773795] (0)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3936,Cur:106,Temp:339,RM:2238,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90419.790394] (elapsed 0.029 seconds) done.
<6>[90419.790440] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90419.790457] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<5>[90419.816090] -(3)[0:swapper/3]lvts_paused = 1
<5>[90419.816165] -(3)[0:swapper/3]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<3>[90419.849426] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90419.849483] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90419.849561] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90419.851262] (3)[23444:kworker/u16:7]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90419.851397] (1)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90419.851586] (1)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90419.851964] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90419.852078] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90419.852114] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90419.852953] (1)[23443:kworker/u16:5][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90419.853791] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90419.853846] (3)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90419.853939] (1)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<6>[90419.854648] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90419.854671] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90419.854700] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90419.855455] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217631127000000 to 2022/12/15 05:41:45 (now = 2022/12/15 05:41:36)
<5>[90419.855663] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:46 (1)
<5>[90419.859232] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90419.859644] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90419.859682] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90419.859694] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90419.859803] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90419.859844] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90419.859889] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90419.859889]
<6>[90419.859911] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90419.859911]
<6>[90419.859933] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90419.859933]
<6>[90419.859955] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90419.859955]
<6>[90419.860069] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90419.860109] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90419.860132] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90419.860731] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90419.860814] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90419.861039] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90419.861388] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90419.861410] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90419.861878] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90419.861899] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90419.862314] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90419.862664] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,782 us
<6>[90419.863420] (3)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 00020002
<6>[90419.863675] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90419.863791] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90419.864169] (3)[10823:Binder:636_2]suspend of devices complete after 56.687
msecs
<6>[90419.870077] (3)[10823:Binder:636_2]late suspend of devices complete after
5.878 msecs
<4>[90419.870106] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90419.874779]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90419.875418] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90419.875770] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90419.876453] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.575 msecs
<6>[90419.876534] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90419.876534] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90419.876534] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90419.876619] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90419.876619] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90419.876619] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 314652, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xbf4b6f14, wlk_cntcv_h = 0x292, 26M_off_pct =
52
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 9.602 seconds
<4>[90419.876619] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90419.876619] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90419.876619] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90419.876619] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90419.876619] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90419.876619] -(3)[0:swapper/3]Call trace:
<4>[90419.876619] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90419.876619] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90419.876619] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90419.876619] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90419.876619] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90419.876619] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90419.876619] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90419.876619] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90419.876619] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90419.876619] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90419.876619] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90419.876619] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90419.876619] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90419.876619] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90419.876619] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90419.876619] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90419.876619] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90419.876619] -(3)[0:swapper/3]---[ end trace 308173880bd0bf88 ]---
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 139430 (32k)
<4>[90419.876619] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 4.255/9.000/9.000/5.792/9.9000 seconds
<6>[90419.876619] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90419.876619] -(3)[0:swapper/3]EINT 222 is pending
<6>[90419.876766] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90419.876811] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90419.876778] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90419.878925] (0)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90419.879763]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90419.879789] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90419.881908] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90419.887676] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.092 msecs
<6>[90419.887929] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90419.888060] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90419.888168] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90419.888214] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90419.888232] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90419.888256] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90419.893272] (2)[10823:Binder:636_2]early resume of devices complete after
4.933 msecs
<5>[90419.893819] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90419.895696] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90419.896038] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90419.896081] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1563 us
<5>[90419.896351] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90419.896720] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90419.896745] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90419.896828] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90419.896861] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90419.896952] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90419.897146] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90419.897201] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90419.897223] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90419.897308] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90419.897350] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90419.897471] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90419.897496] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90419.897510] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90419.897730] (2)[10823:Binder:636_2]zcvf, no update time:39 96 avgc:0
avgc_thread
<5>[90419.897760] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90419.900710] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90419.901828] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90419.901924] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90419.902272] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90419.902306] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90419.902975] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90419.903385] (2)[7306:kworker/2:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90419.905566] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90419.907229] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90419.907251] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90419.907354] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90419.907501] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90419.910770] (3)[10823:Binder:636_2]resume of devices complete after 17.465
msecs
<3>[90419.916688] (3)[23446:kworker/3:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90419.916714] (3)[23446:kworker/3:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90419.917374] (3)[23446:kworker/3:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90419.917395] (3)[23446:kworker/3:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90419.917592] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90419.917612] (6)[1316:vdec_log_info]Restarting tasks ...
<6>[90419.924790] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90419.925001] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90419.925765] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90419.929993] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217726405000000
<12>[90419.932061] (4)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90419.932111] (4)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<4>[90419.939155] done.
<5>[90419.939258] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90419.939276] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90419.942477] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90419.943882] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181257,10051,16030scp1 sleep state: 54785,23395,23395
<6>[90419.943912] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90419.943912]
<5>[90419.943931] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90419.943946] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90419.943970] -(3)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90419.943986] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<12>[90419.944568] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<5>[90419.945152] -(0)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90419.945586] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90419.946384] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90419.946433] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:46.346018105 UTC
<6>[90419.946624] (3)[23446:kworker/3:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:1><0x5b96>
<36>[90419.946686] (1)[576:logd.auditd]type=1400 audit(1671082906.344:1623049):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90419.946733] (3)[23446:kworker/3:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90419.946750] (3)[23446:kworker/3:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90419.946789] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90419.946813] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90419.946834] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90419.947412] (5)[853:[email protected]]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<12>[90419.960715] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90419.960775] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90419.972107] (6)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<3>[90419.972333] (0)[857:[email protected]][mtk_nanohub]sensor_id id 16,
sensor_type:17
<5>[90419.973911] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217726405000000
<5>[90419.978288] -(6)[1454:system_server]alarmtimer_enqueue, 217726405000000
<12>[90419.978912] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<12>[90419.978957] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<4>[90419.983123] -(7)[1271:app]CPU7: update max cpu_capacity 953
<12>[90419.984614] (5)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<3>[90419.992252] (3)[7406:kworker/3:2]typec_cc_orientation = 2
<12>[90419.993681] (4)[853:[email protected]]healthd: battery l=59 v=3936 t=33.9 h=2
st=3 c=51 fc=4110000 cc=670 chg=
<3>[90420.007635] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90420.014663] -(2)[4336:Binder:1454_C]alarmtimer_enqueue, 217637588000000
<5>[90420.025354] -(6)[3662:WifiScanningSer]alarmtimer_enqueue, 217637588000000
<6>[90420.048937] (5)[10823:Binder:636_2]active wakeup source: WLAN timeout
<6>[90420.048985] (5)[10823:Binder:636_2]active wakeup source: main
<6>[90420.048995] (5)[10823:Binder:636_2]active wakeup source: usb
<6>[90420.049028] (5)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90420.099353] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90420.155131] (3)[7406:kworker/3:2]chg_type = 0, hvdcp_type = 0
<3>[90420.203194] (3)[7406:kworker/3:2]get_connector_temp: connector_temp:326
<6>[90420.203234] (3)[7406:kworker/3:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90420.203300] (3)[7406:kworker/3:2]mt_charger_plugin plugin:0
<6>[90420.256600] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90420.318280] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90420.574414] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:22%
<6>[90420.574520] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90420.574542] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90420.574553] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90420.574567] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90420.574575] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90420.574589] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33186,33543079,5450), tx=(12958,2000,10958), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90420.574670] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90420.705253] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90420.947287] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90420.947386] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90420.947441] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90420.947484] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90420.958129] (3)[2356:kworker/3:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:5><0x934>
<6>[90421.018842] (2)[7519:kworker/2:4][bq27z561] fg_update_status:
SOC:59,Volt:3932,Cur:143,Temp:338,RM:2238,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90421.019039] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90421.020034] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90421.020598] (0)[118:pd_dbg_info]///PD dbg info 128d
<5>[90421.020625] (0)[118:pd_dbg_info]<90421.020>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90421.020625] <90421.020>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90421.031195] (2)[23427:kworker/2:2]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<5>[90421.290441] -(2)[3662:WifiScanningSer]alarmtimer_enqueue, 217637588000000
<5>[90421.339115] -(2)[1868:Binder:1454_4]alarmtimer_enqueue, 217726405000000
<5>[90421.339760] -(2)[1868:Binder:1454_4]alarmtimer_enqueue, 217726405000000
<6>[90421.714589] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90421.854511] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 314652, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90421.854614] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90421.982173] (3)[2356:kworker/3:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:5><0x934>
<6>[90422.722417] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90422.881849] (3)[2356:kworker/3:5]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90422.882183] (3)[7406:kworker/3:2]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<3>[90422.884135] (3)[2356:kworker/3:5]ghr: scsi_execute exit ret = 0x0
<3>[90422.884196] (3)[7406:kworker/3:2]ghr: scsi_execute exit ret = 0x0
<5>[90422.947733] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90422.947833] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90422.947886] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90422.947929] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90422.948579] (0)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90423.005970] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<4>[90423.285071] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 756,
715, 574, 614, 269, 103, 88, 60, success counter cpu: 106, 133, 97, 91, 46, 20, 16,
3, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 174, 228, 190,
172, 133, 26, 22, 7, o: 0-1,3-7, p: , f: , t: 9223372036854775807, 90423459826002,
90423418901234, 90423455578849, 90423536810821, 90423676000000, 90423708000000,
90423676000000,
<3>[90423.431919] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90423.531625] -(1)[4336:Binder:1454_C]alarmtimer_enqueue, 217641105000000
<6>[90423.534713] (0)[10823:Binder:636_2]last active wakeup source: ttyC0
<6>[90423.638720] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90423.638770] (1)[23437:kworker/u16:3]PM: Syncing filesystems ...
<7>[90423.639048] (1)[23437:kworker/u16:3]PM: ++
<4>[90423.646157] (4)[7032:kworker/4:0]power_debug_work: start
<7>[90423.649209] (3)[23437:kworker/u16:3]PM: --
<6>[90423.734886] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90423.745919] done.
<5>[90423.751073] -(2)[0:swapper/2]lvts_paused = 1
<6>[90423.753879] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181503,10277,16282scp1 sleep state: 54787,23395,23395
<6>[90423.753912] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90423.753912]
<6>[90423.753937] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90423.753937]
<6>[90423.753960] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90423.753960]
<6>[90423.753982] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90423.753982]
<5>[90423.754004] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90423.754022] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90423.754063] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90423.754093] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90423.754484] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90423.754519] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:50.154119643 UTC
<6>[90423.754732] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90423.754790] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90423.754818] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90423.754844] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90423.754991] (1)[576:logd.auditd]type=1400 audit(1671082910.152:1623050):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90423.756177] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90423.757916] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90423.757945] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90423.785428] (elapsed 0.030 seconds) done.
<6>[90423.785468] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90423.785488] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90423.845543] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90423.845587] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90423.845732] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90423.847083] (3)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90423.848086] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90423.848200] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90423.848236] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90423.849063] (3)[23437:kworker/u16:3][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90423.849267] (3)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<6>[90423.850701] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90423.850726] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90423.850755] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90423.851497] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217641105000000 to 2022/12/15 05:41:54 (now = 2022/12/15 05:41:49)
<5>[90423.851614] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:55 (1)
<5>[90423.855253] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90423.855682] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90423.855721] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90423.855733] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90423.855838] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90423.855880] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90423.855927] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90423.855927]
<6>[90423.855950] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90423.855950]
<6>[90423.855972] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90423.855972]
<6>[90423.855993] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90423.855993]
<6>[90423.856114] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90423.856154] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90423.856177] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90423.856815] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90423.856897] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90423.857122] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90423.857476] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90423.857498] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90423.857990] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90423.858011] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90423.858472] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90423.858831] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,837 us
<6>[90423.859780] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90423.860054] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90423.860179] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90423.860582] (3)[10823:Binder:636_2]suspend of devices complete after 58.198
msecs
<6>[90423.867475] (3)[10823:Binder:636_2]late suspend of devices complete after
6.861 msecs
<4>[90423.867503] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90423.873466]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90423.874173] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90423.874560] (3)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90423.875343] (3)[10823:Binder:636_2]noirq suspend of devices complete after
7.007 msecs
<6>[90423.875415] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90423.875415] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90423.875415] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90423.875491] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90423.875491] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90423.875491] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90423.875491] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90423.875491] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90423.875491] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 55163, r13 = 0xc400f9bc, debug_flag = 0xf8061bff
0x4001e66e, connectivity not sleep, modem not sleep, subsys sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6163f9, req_sta = 0x1c3d0ff
0x0 0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xc3b35783, wlk_cntcv_h = 0x292, 26M_off_pct =
63
<6>[90423.875491] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 1.683 seconds
<4>[90423.875491] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90423.875491] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90423.875491] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90423.875491] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90423.875491] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90423.875491] -(3)[0:swapper/3]Call trace:
<4>[90423.875491] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90423.875491] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90423.875491] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90423.875491] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90423.875491] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90423.875491] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90423.875491] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90423.875491] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90423.875491] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90423.875491] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90423.875491] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90423.875491] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90423.875491] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90423.875491] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90423.875491] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90423.875491] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90423.875491] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90423.875491] -(3)[0:swapper/3]---[ end trace 308173880bd0bf89 ]---
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 28642 (32k)
<4>[90423.875491] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.874/1.099/1.099/1.099/1.1099 seconds
<6>[90423.875491] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90423.875617] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90423.875660] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90423.875624] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90423.877660] (4)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_resume
<5>[90423.878787]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90423.878816] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90423.880881] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90423.886502] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.937 msecs
<6>[90423.886782] (1)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(96)
<6>[90423.887001] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90423.887023] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90423.892264] (3)[10823:Binder:636_2]early resume of devices complete after
5.190 msecs
<5>[90423.892759] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90423.894684] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90423.894970] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90423.895009] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1475 us
<5>[90423.895280] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90423.895803] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90423.895829] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90423.895905] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90423.895936] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90423.896016] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90423.896202] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90423.896258] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90423.896281] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90423.896362] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90423.896403] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90423.896525] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90423.896549] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90423.896563] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90423.896706] (3)[10823:Binder:636_2]zcvf, no update time:45 96 avgc:0
avgc_thread
<5>[90423.896734] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90423.899710] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90423.900737] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90423.900829] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90423.901120] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90423.901155] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90423.901901] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90423.901999] (2)[7519:kworker/2:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90423.902888] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90423.903163] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90423.903410] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90423.904107] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90423.904697] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90423.909294] (1)[10823:Binder:636_2]resume of devices complete after 16.997
msecs
<3>[90423.913326] (1)[25366:kworker/1:4]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90423.913350] (1)[25366:kworker/1:4][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90423.913946] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90423.913969] (1)[25366:kworker/1:4]Restarting tasks ...
<3>[90423.914175] (1)[25366:kworker/1:4]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90423.914207] (1)[25366:kworker/1:4][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90423.921406] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90423.921459] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90423.922365] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90423.922469] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217641105000000
<4>[90423.936867] done.
<5>[90423.936897] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90423.936915] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90423.941661] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90423.943595] (5)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181551,10296,16320scp1 sleep state: 54789,23395,23395
<6>[90423.943629] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90423.943629]
<5>[90423.943650] (5)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90423.943666] (5)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90423.943688] -(5)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90423.943703] (5)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90423.944397] -(0)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90423.944822] (5)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90423.945529] (5)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90423.945560] (5)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:52.032196796 UTC
<6>[90423.945778] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90423.945848] (5)[27096:kworker/5:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90423.945859] (5)[27096:kworker/5:3]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90423.945909] (5)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x000011d0], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x50200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90423.945924] (5)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90423.945937] (5)[10823:Binder:636_2]PM: suspend exit
<36>[90423.946029] (1)[576:logd.auditd]type=1400 audit(1671082912.026:1623051):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90423.946390] (2)[26031:kworker/2:5]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0300c0e] bgf wf
<3>[90423.988824] (2)[26031:kworker/2:5]typec_cc_orientation = 2
<6>[90424.046833] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90424.046878] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90424.046930] (3)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90424.096435] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90424.153563] (2)[26031:kworker/2:5]chg_type = 0, hvdcp_type = 0
<6>[90424.202305] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90424.333556] (2)[26031:kworker/2:5]get_connector_temp: connector_temp:326
<6>[90424.333731] (2)[26031:kworker/2:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90424.333803] (2)[26031:kworker/2:5]mt_charger_plugin plugin:0
<6>[90424.545562] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90424.545707] (3)[23436:kworker/u16:0]PM: Syncing filesystems ...
<7>[90424.545844] (3)[23436:kworker/u16:0]PM: ++
<7>[90424.557024] (3)[23436:kworker/u16:0]PM: --
<4>[90424.654591] done.
<6>[90424.660798] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181568,10304,16340scp1 sleep state: 54791,23395,23395
<6>[90424.660835] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90424.660835]
<6>[90424.660860] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90424.660860]
<6>[90424.660883] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90424.660883]
<6>[90424.660905] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90424.660905]
<5>[90424.660927] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90424.660946] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90424.660984] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90424.661032] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90424.661460] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90424.661495] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:52.748139257 UTC
<6>[90424.661826] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90424.661878] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90424.661906] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90424.661931] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90424.662081] (1)[576:logd.auditd]type=1400 audit(1671082912.742:1623052):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90424.663884] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90424.664822] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90424.664852] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90424.690370] (elapsed 0.028 seconds) done.
<6>[90424.690406] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90424.690426] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90424.746697] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90424.746746] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90424.746814] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90424.748212] (2)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90424.748295] (3)[23436:kworker/u16:0]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90424.748504] (1)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90424.750856] (2)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90424.750868] (3)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90424.750887] (1)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90424.750921] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90424.751033] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90424.751068] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90424.751880] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90424.753245] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90424.753282] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90424.753311] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90424.754204] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217641105000000 to 2022/12/15 05:41:55 (now = 2022/12/15 05:41:52)
<5>[90424.754326] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:41:56 (1)
<5>[90424.758353] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90424.758788] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90424.758826] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90424.758838] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90424.758949] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90424.758991] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90424.759036] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90424.759036]
<6>[90424.759059] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90424.759059]
<6>[90424.759081] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90424.759081]
<6>[90424.759102] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90424.759102]
<6>[90424.759215] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90424.759256] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90424.759280] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90424.759913] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90424.759995] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90424.760218] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90424.760578] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90424.760599] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90424.761022] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90424.761041] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90424.761920] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90424.762245] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,1217 us
<6>[90424.763075] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90424.763341] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90424.763469] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90424.763882] (3)[10823:Binder:636_2]suspend of devices complete after 58.609
msecs
<6>[90424.769276] (3)[10823:Binder:636_2]late suspend of devices complete after
5.365 msecs
<4>[90424.769302] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90424.773975]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90424.774602] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90424.774947] (2)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90424.775588] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.430 msecs
<6>[90424.775673] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90424.775673] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90424.775673] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90424.775749] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90424.775749] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90424.775749] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90424.775749] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90424.775749] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90424.775749] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 50610, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xc599008c, wlk_cntcv_h = 0x292, 26M_off_pct =
61
<6>[90424.775749] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 1.544 seconds
<4>[90424.775749] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90424.775749] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90424.775749] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90424.775749] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90424.775749] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90424.775749] -(3)[0:swapper/3]Call trace:
<4>[90424.775749] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90424.775749] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90424.775749] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90424.775749] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90424.775749] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90424.775749] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90424.775749] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90424.775749] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90424.775749] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90424.775749] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90424.775749] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90424.775749] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90424.775749] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90424.775749] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90424.775749] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90424.775749] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90424.775749] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90424.775749] -(3)[0:swapper/3]---[ end trace 308173880bd0bf8a ]---
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 28578 (32k)
<4>[90424.775749] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.872/1.088/1.088/0.878/1.1088 seconds
<6>[90424.775749] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90424.775876] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90424.775919] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90424.775883] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90424.777412] (2)[25368:kworker/u16:9]mtu3_phone musb-hdrc: mtu3_resume
<5>[90424.778591]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90424.778921] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90424.780888] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90424.786485] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.832 msecs
<6>[90424.786770] (0)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(4/14/0)
(97)
<6>[90424.786977] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90424.787000] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90424.791738] (2)[10823:Binder:636_2]early resume of devices complete after
4.683 msecs
<5>[90424.792441] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90424.794377] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90424.794810] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90424.794851] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1741 us
<5>[90424.795447] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90424.795847] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90424.795874] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90424.795949] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90424.795981] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90424.796064] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90424.796253] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90424.796309] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90424.796331] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90424.796412] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90424.796452] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90424.796580] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90424.796604] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90424.796618] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90424.796761] (3)[10823:Binder:636_2]zcvf, no update time:47 96 avgc:0
avgc_thread
<5>[90424.796787] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90424.799673] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90424.800690] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90424.800782] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90424.801076] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90424.801110] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90424.801802] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90424.801947] (3)[23446:kworker/3:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90424.803999] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90424.804369] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90424.804671] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90424.805446] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90424.805795] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90424.807965] (0)[10823:Binder:636_2]resume of devices complete after 16.195
msecs
<3>[90424.811819] (0)[25356:kworker/0:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90424.811843] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90424.812335] (0)[25356:kworker/0:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90424.812354] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90424.812514] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90424.812530] (4)[1314:receiver]Restarting tasks ...
<6>[90424.819857] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90424.819871] (3)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90424.819952] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90424.820360] -(7)[1893:AlarmManager]alarmtimer_enqueue, 217641105000000
<6>[90424.824809] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90424.832073] done.
<5>[90424.832103] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90424.832118] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90424.836175] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90424.840130] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181613,10322,16382scp1 sleep state: 54793,23398,23398
<6>[90424.840156] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90424.840156]
<5>[90424.840170] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90424.840181] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90424.840199] -(0)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90424.840211] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90424.840885] -(6)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90424.841325] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90424.842041] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90424.842080] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:41:54.476763026 UTC
<6>[90424.842221] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90424.842290] (0)[25356:kworker/0:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90424.842301] (0)[25356:kworker/0:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90424.842315] (1)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90424.842333] (1)[576:logd.auditd]type=1400 audit(1671082914.474:1623053):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90424.842344] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90424.842355] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90424.842368] (0)[10823:Binder:636_2]PM: suspend exit
<3>[90424.890489] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90424.943462] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90424.943502] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90424.943547] (0)[10823:Binder:636_2]active wakeup source: ccci_fs
<5>[90424.948681] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90424.948866] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90424.948930] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90424.948973] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90425.002662] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90425.049144] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<3>[90425.101270] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:326
<6>[90425.101494] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90425.101805] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<12>[90425.110127] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=37 fc=4110000 cc=670 chg=
<12>[90425.110177] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=37 fc=4110000 cc=670 chg=
<12>[90425.114854] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=37 fc=4110000 cc=670 chg=
<6>[90425.151084] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90425.206529] (1)[933:[email protected]][mtk_nanohub]sensor_id id 16,
sensor_type:17
<5>[90425.211727] -(6)[1454:system_server]alarmtimer_enqueue, 217641105000000
<5>[90425.211928] -(6)[1454:system_server]alarmtimer_enqueue, 217641105000000
<6>[90425.246193] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90425.246470] (5)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<12>[90425.260268] (4)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=37 fc=4110000 cc=670 chg=
<12>[90425.260317] (4)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=37 fc=4110000 cc=670 chg=
<12>[90425.264975] (4)[853:[email protected]]healthd: battery l=59 v=3937 t=33.8 h=2
st=3 c=37 fc=4110000 cc=670 chg=
<3>[90425.313936] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90425.353776] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:00000000cad3e3e9 triggered!
<6>[90425.353917] (3)[559:lmkd]psi_trigger_poll: t:00000000cad3e3e9 triggered!
<6>[90425.847458] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90425.853919] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90425.916413] (3)[25513:kworker/3:4][bq27z561] fg_update_status:
SOC:59,Volt:3927,Cur:132,Temp:339,RM:2237,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90425.916580] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90425.917565] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90425.918198] (0)[118:pd_dbg_info]///PD dbg info 128d
<5>[90425.918223] (0)[118:pd_dbg_info]<90425.917>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90425.918223] <90425.918>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90425.928290] (3)[23446:kworker/3:1]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90425.939041] (5)[853:[email protected]]healthd: battery l=59 v=3927 t=33.9 h=2
st=3 c=132 fc=4110000 cc=670 chg=
<12>[90425.939085] (5)[853:[email protected]]healthd: battery l=59 v=3927 t=33.9 h=2
st=3 c=132 fc=4110000 cc=670 chg=
<12>[90425.942597] (5)[853:[email protected]]healthd: battery l=59 v=3927 t=33.9 h=2
st=3 c=132 fc=4110000 cc=670 chg=
<12>[90425.948814] (0)[853:[email protected]]healthd: battery l=59 v=3927 t=33.9 h=2
st=3 c=132 fc=4110000 cc=670 chg=
<6>[90426.325948] (1)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90426.326216] (0)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90426.639667] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90426.639809] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90426.639904] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90426.639969] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<5>[90426.817481] (0)[25356:kworker/0:1]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<5>[90426.817998] (0)[7416:kworker/0:2]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<3>[90426.819925] (0)[7416:kworker/0:2]ghr: scsi_execute exit ret = 0x0
<3>[90426.819976] (0)[25356:kworker/0:1]ghr: scsi_execute exit ret = 0x0
<6>[90426.857168] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90426.877963] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<5>[90426.949224] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90426.949326] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90426.949381] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90426.949423] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90427.613999] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 50610, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000011 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90427.614054] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90427.865856] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90427.903129] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90427.997745] (1)[0:swapper/1][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<4>[90428.286732] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 657,
626, 550, 476, 252, 118, 100, 63, success counter cpu: 94, 94, 130, 86, 45, 15, 7,
1, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 183, 166, 199,
176, 82, 30, 10, 3, o: 0-2,4-7, p: , f: , t: 9223372036854775807, 90428476000000,
90428428632696, 90428476000000, 90428426534439, 90428815942387, 90428815932925,
90428636000000,
<6>[90428.510088] (1)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90428.514283] -(1)[7539:kworker/u17:0][ccci1/fsm]received MD status response
97620043
<6>[90428.514513] (1)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3749
<6>[90428.631259] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x1,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428631221991,15000000]
<6>[90428.631327] (0)[431:wdtk-0][thread:431][RT:90428631310376] 2022-12-15
05:41:58.266012 UTC;android time 2022-12-15 12:41:58.266012
<6>[90428.648701] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x5,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428648664760,14982557]
<6>[90428.662047] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x7,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428662011222,14969211]
<6>[90428.673448] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0xf,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428673421068,14957801]
<6>[90428.673716] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x1f,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428673707222,14957515]
<6>[90428.692976] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0x9f,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428692961068,14938261]
<6>[90428.693187] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0xbf,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428693169068,14938053]
<6>[90428.693215] (6)[437:wdtk-6][wdk-k]
cpu=6,lbit=0xff,cbit=0xff,7,1,2667932697,90424661481983,90424842056136,
[90428693200761,14938021]
<5>[90428.701861] (0)[25356:kworker/0:1]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90428.704013] (0)[25356:kworker/0:1]ghr: scsi_execute exit ret = 0x0
<6>[90428.704114] (0)[25356:kworker/0:1]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90428.704136] (0)[25356:kworker/0:1]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90428.704562] (0)[25356:kworker/0:1]ufshcd bootdevice: rs,ret 0,443 us
<3>[90428.741900] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<4>[90428.863286] -(0)[5449:Binder:1454_1C]alarmtimer_enqueue: 4 callbacks
suppressed
<5>[90428.863304] -(0)[5449:Binder:1454_1C]alarmtimer_enqueue, 217726405000000
<6>[90428.874022] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90428.904631] (4)[7032:kworker/4:0]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90428.904673] (4)[7032:kworker/4:0]ufshcd bootdevice: rr,ret 0,1915 us
<3>[90428.916906] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90428.924089] -(5)[4944:Binder:1454_13]alarmtimer_enqueue, 217726405000000
<6>[90428.925933] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<3>[90428.930760] (2)[857:[email protected]][mtk_nanohub]sensor_id id 21,
sensor_type:22
<5>[90428.933650] -(2)[4944:Binder:1454_13]alarmtimer_enqueue, 217726405000000
<5>[90428.933895] -(2)[4944:Binder:1454_13]alarmtimer_enqueue, 217726405000000
<6>[90428.936630] (5)[10823:Binder:636_2]active wakeup source: ccci_poll
<5>[90428.949649] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90428.949716] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90428.949754] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90428.949778] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90428.950498] (0)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90429.038369] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90429.038420] (1)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90429.038733] (1)[23443:kworker/u16:5]PM: ++
<7>[90429.048222] (1)[23443:kworker/u16:5]PM: --
<4>[90429.149369] done.
<6>[90429.157164] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10181862,10545,16651scp1 sleep state: 54795,23398,23398
<6>[90429.157224] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90429.157224]
<6>[90429.157249] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90429.157249]
<6>[90429.157272] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90429.157272]
<6>[90429.157295] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90429.157295]
<5>[90429.157317] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90429.157336] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90429.157376] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90429.157405] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90429.157878] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90429.157914] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:41:58.792607565 UTC
<6>[90429.158109] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90429.158168] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90429.158195] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90429.158221] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90429.158377] (1)[576:logd.auditd]type=1400 audit(1671082918.786:1623054):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90429.160051] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90429.161201] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90429.161229] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90429.188755] (elapsed 0.030 seconds) done.
<6>[90429.188793] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90429.188813] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90429.250934] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90429.250990] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90429.251068] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90429.252604] (1)[2328:kworker/u16:1]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90429.253301] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90429.253431] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90429.253469] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90429.254511] (1)[2328:kworker/u16:1][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90429.254983] (1)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<6>[90429.255956] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90429.255985] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90429.256016] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90429.256918] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217726405000000 to 2022/12/15 05:43:20 (now = 2022/12/15 05:41:58)
<5>[90429.257048] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:43:21 (1)
<5>[90429.260666] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90429.261119] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90429.261159] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90429.261171] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90429.261288] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90429.261331] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90429.261379] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90429.261379]
<6>[90429.261401] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90429.261401]
<6>[90429.261423] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90429.261423]
<6>[90429.261445] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90429.261445]
<6>[90429.261577] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90429.261687] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90429.261714] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90429.262400] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90429.262488] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90429.262722] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90429.263128] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90429.263151] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90429.263622] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90429.263641] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90429.264102] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90429.264446] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,819 us
<6>[90429.265301] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90429.265661] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90429.265798] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90429.266235] (3)[10823:Binder:636_2]suspend of devices complete after 59.979
msecs
<6>[90429.271889] (3)[10823:Binder:636_2]late suspend of devices complete after
5.623 msecs
<4>[90429.271917] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90429.276638]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90429.277335] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90429.277779] (1)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90429.278435] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.735 msecs
<6>[90429.278522] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90429.278522] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90429.278522] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90429.278605] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90429.278605] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90429.278605] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 326686, r13 = 0x84000880, debug_flag =
0xf80618ff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7ff, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xd0d08b74, wlk_cntcv_h = 0x292, 26M_off_pct =
82
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 9.969 seconds
<4>[90429.278605] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90429.278605] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90429.278605] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90429.278605] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90429.278605] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90429.278605] -(3)[0:swapper/3]Call trace:
<4>[90429.278605] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90429.278605] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90429.278605] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90429.278605] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90429.278605] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90429.278605] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90429.278605] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90429.278605] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90429.278605] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90429.278605] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90429.278605] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90429.278605] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90429.278605] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90429.278605] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90429.278605] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90429.278605] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90429.278605] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90429.278605] -(3)[0:swapper/3]---[ end trace 308173880bd0bf8b ]---
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 250593 (32k)
<4>[90429.278605] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 7.647/9.243/9.243/8.095/9.9243 seconds
<6>[90429.278605] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90429.278732] -(3)[0:swapper/3][SCP] ipi id/type/action/event/reserve =
3/77/6/4/0
<6>[90429.278777] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90429.278819] -(3)[0:swapper/3]i2c no need switch top pll
<6>[90429.280583] (1)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_resume
<5>[90429.281453]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90429.281481] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90429.283600] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90429.289410] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.842 msecs
<6>[90429.290018] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd]
<4>[90429.290043] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90429.295145] (2)[10823:Binder:636_2]early resume of devices complete after
5.041 msecs
<5>[90429.295594] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90429.297648] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90429.298024] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90429.298065] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1650 us
<5>[90429.298341] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90429.298950] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90429.298978] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90429.299061] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90429.299094] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90429.299183] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90429.299374] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90429.299439] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90429.299463] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90429.299547] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90429.299589] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90429.299710] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90429.299734] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90429.299748] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90429.299894] (2)[10823:Binder:636_2]zcvf, no update time:62 96 avgc:0
avgc_thread
<5>[90429.299922] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90429.303109] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90429.304177] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90429.304269] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90429.304599] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90429.304747] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90429.305534] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90429.305733] (3)[2356:kworker/3:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90429.307828] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90429.308348] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90429.309001] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90429.309106] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<3>[90429.309904] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90429.312574] (0)[10823:Binder:636_2]resume of devices complete after 17.396
msecs
<6>[90429.317877] (3)[10823:Binder:636_2]OOM killer enabled.
<3>[90429.317891] (0)[7416:kworker/0:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90429.317907] (0)[7416:kworker/0:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<6>[90429.317931] (0)[7416:kworker/0:2]Restarting tasks ...
<3>[90429.318740] (0)[7416:kworker/0:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90429.318774] (0)[7416:kworker/0:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90429.324775] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90429.325143] (0)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90429.325195] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90429.325838] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217726405000000
<4>[90429.336072] done.
<5>[90429.336099] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90429.336136] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90429.339897] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90429.351679] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10182311,10655,16785scp1 sleep state: 54797,23401,23401
<6>[90429.351722] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90429.351722]
<5>[90429.351735] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90429.351746] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90429.351766] -(3)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90429.351778] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90429.352784] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90429.352983] -(4)[404:EEM_CTRL_B][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90429.353564] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90429.353695] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:42:08.961775256 UTC
<6>[90429.353911] (3)[25513:kworker/3:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:4><0x63a9>
<6>[90429.354010] (3)[25513:kworker/3:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<36>[90429.354025] (1)[576:logd.auditd]type=1400 audit(1671082928.954:1623055):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90429.354046] (3)[25513:kworker/3:4]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90429.354051] (3)[25513:kworker/3:4]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90429.354103] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90429.354119] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90429.356247] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90429.450219] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90429.458005] (4)[10823:Binder:636_2]active wakeup source: main
<6>[90429.458035] (4)[10823:Binder:636_2]active wakeup source: usb
<6>[90429.458071] (4)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90429.528948] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90429.584752] (3)[23446:kworker/3:1]typec_cc_orientation = 2
<3>[90429.733972] (3)[23446:kworker/3:1]chg_type = 0, hvdcp_type = 0
<3>[90429.787252] (3)[23446:kworker/3:1]get_connector_temp: connector_temp:326
<6>[90429.787329] (3)[23446:kworker/3:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90429.787401] (3)[23446:kworker/3:1]mt_charger_plugin plugin:0
<6>[90429.879549] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90429.921751] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90429.921800] (2)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90429.922021] (2)[23444:kworker/u16:7]PM: ++
<7>[90429.931829] (2)[23444:kworker/u16:7]PM: --
<4>[90430.030084] done.
<6>[90430.039164] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10182343,10662,16798scp1 sleep state: 54799,23403,23403
<6>[90430.039223] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90430.039223]
<6>[90430.039249] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90430.039249]
<6>[90430.039272] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90430.039272]
<6>[90430.039294] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90430.039294]
<5>[90430.039317] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90430.039335] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90430.039375] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90430.039405] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90430.039787] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90430.039822] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:42:09.647920256 UTC
<6>[90430.040046] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90430.040105] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90430.040133] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90430.040159] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90430.040399] (2)[576:logd.auditd]type=1400 audit(1671082929.642:1623056):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90430.041939] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90430.043314] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90430.043343] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90430.070750] (elapsed 0.030 seconds) done.
<6>[90430.070787] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90430.070808] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90430.131374] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:326
<3>[90430.131431] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90430.131507] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90430.133055] (2)[23444:kworker/u16:7]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90430.133443] (2)[23438:kworker/u16:4]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90430.133744] (1)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90430.134115] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90430.134240] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90430.134277] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90430.135138] (4)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90430.135904] (4)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90430.135918] (2)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90430.135956] (1)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<6>[90430.136891] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90430.136917] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90430.136948] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90430.137931] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217726405000000 to 2022/12/15 05:43:20 (now = 2022/12/15 05:42:09)
<5>[90430.138053] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:43:21 (1)
<5>[90430.141477] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90430.142083] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90430.142127] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90430.142139] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90430.142260] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90430.142305] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90430.142351] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90430.142351]
<6>[90430.142374] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90430.142374]
<6>[90430.142395] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90430.142395]
<6>[90430.142417] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90430.142417]
<6>[90430.142541] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90430.142587] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90430.142611] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90430.143312] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90430.143399] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90430.143633] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90430.144014] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90430.144037] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90430.144511] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90430.144531] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90430.144975] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90430.146335] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,1816 us
<6>[90430.147195] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90430.147487] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90430.147621] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90430.148066] (2)[10823:Binder:636_2]suspend of devices complete after 60.091
msecs
<6>[90430.153928] (2)[10823:Binder:636_2]late suspend of devices complete after
5.828 msecs
<4>[90430.153957] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90430.158852]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90430.159496] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90430.159853] (0)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90430.160530] (2)[10823:Binder:636_2]noirq suspend of devices complete after
5.799 msecs
<6>[90430.160613] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90430.160613] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90430.160613] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<5>[90430.160696] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90430.160696] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90430.160696] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 2343033, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x8e809d7, wlk_cntcv_h = 0x293, 26M_off_pct = 94
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 71.503 seconds
<4>[90430.160696] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90430.160696] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90430.160696] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90430.160696] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90430.160696] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90430.160696] -(2)[0:swapper/2]Call trace:
<4>[90430.160696] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90430.160696] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90430.160696] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90430.160696] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90430.160696] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90430.160696] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90430.160696] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90430.160696] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90430.160696] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90430.160696] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90430.160696] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90430.160696] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90430.160696] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90430.160696] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90430.160696] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90430.160696] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90430.160696] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90430.160696] -(2)[0:swapper/2]---[ end trace 308173880bd0bf8c ]---
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 2241668 (32k)
<4>[90430.160696] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 68.410/71.679/71.587/69.422/71.1675 seconds
<6>[90430.160696] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90430.160696] -(2)[0:swapper/2]EINT 222 is pending
<6>[90430.160838] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x40000, 0x0)
<6>[90430.160883] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90430.160854] -(2)[0:swapper/2]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90430.163063] (0)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_resume
<5>[90430.164045]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90430.164073] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90430.166181] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90430.171975] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.051 msecs
<6>[90430.172246] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90430.172375] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90430.172471] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90430.172519] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90430.172666] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90430.172694] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90430.178055] (2)[10823:Binder:636_2]early resume of devices complete after
5.303 msecs
<5>[90430.178483] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90430.180576] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90430.180886] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90430.180927] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1767 us
<5>[90430.181197] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90430.181870] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90430.181899] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90430.181983] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90430.182016] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90430.182107] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90430.182300] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90430.182366] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90430.182390] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90430.182476] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90430.182518] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90430.182641] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90430.182666] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90430.182680] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90430.182839] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90430.186370] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90430.187531] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90430.187628] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90430.187950] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90430.188096] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90430.188654] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90430.188798] (3)[7406:kworker/3:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90430.190925] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90430.191555] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90430.192416] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90430.192971] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90430.193074] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90430.195464] (0)[10823:Binder:636_2]resume of devices complete after 17.375
msecs
<3>[90430.200605] (0)[25356:kworker/0:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90430.200630] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90430.201289] (0)[25356:kworker/0:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90430.201310] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90430.201507] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90430.201527] (1)[1315:receiver]Restarting tasks ...
<6>[90430.208777] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90430.209047] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90430.209142] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90430.222773] done.
<5>[90430.222813] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90430.222831] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90430.225983] (3)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90430.226061] (3)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<5>[90430.226689] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<12>[90430.230492] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90430.234568] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90430.234607] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<6>[90430.237451] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10185502,11423,17583scp1 sleep state: 54801,23408,23408
<6>[90430.237486] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90430.237486]
<5>[90430.237510] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90430.237529] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90430.237635] -(0)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90430.237656] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90430.238769] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90430.239229] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90430.239559] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90430.239609] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:43:21.355115875 UTC
<6>[90430.239826] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<36>[90430.239882] (2)[576:logd.auditd]type=1400 audit(1671083001.352:1623057):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90430.239930] (0)[25356:kworker/0:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90430.239949] (0)[25356:kworker/0:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90430.240004] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90430.240020] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90430.240056] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<12>[90430.241503] (1)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<6>[90430.242647] (0)[10823:Binder:636_2]PM: suspend exit
<12>[90430.262594] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90430.262643] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90430.270067] (6)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<6>[90430.270519] -(4)[7033:lowpool[171]][ccci1/dpmaif]tx0_resume_tx: 0x40000,
0x40000, 0x0
<6>[90430.270565] -(3)[26515:Binder:26499_4][ccci1/dpmaif]wake up by MD0 HIF
L2(8400/0)(3e0/0)!
<6>[90430.270908] -(4)[7033:lowpool[171]][ccci1/dpmaif]wake up by MD0 HIF L2(21/0)
(3e0/0)!
<6>[90430.270943] -(4)[7033:lowpool[171]][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x40000, 0x0
<6>[90430.271635] (2)[1307:dpmaif_txq0_don][ccci1/dpmaif]DPMA_MD wakeup source:
(0/2)
<12>[90430.278398] (4)[853:[email protected]]healthd: battery l=59 v=3939 t=33.9 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<3>[90430.333012] (3)[7406:kworker/3:2]typec_cc_orientation = 2
<6>[90430.343852] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90430.343885] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90430.343927] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<3>[90430.385868] (3)[7406:kworker/3:2]chg_type = 0, hvdcp_type = 0
<6>[90430.436935] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90430.516907] (2)[7519:kworker/2:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90430.557801] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90430.567333] -(2)[0:swapper/2][ccci1/dpmaif]tx1_resume_tx: 0x40000, 0x40000,
0x0
<6>[90430.567433] -(3)[7406:kworker/3:2][ccci1/dpmaif]clear txq1_resume_done:
0x40000, 0x40000, 0x0
<3>[90430.567516] (3)[7406:kworker/3:2]get_connector_temp: connector_temp:328
<6>[90430.567554] (3)[7406:kworker/3:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90430.567619] (3)[7406:kworker/3:2]mt_charger_plugin plugin:0
<4>[90430.580781] -(6)[4944:Binder:1454_13]alarmtimer_enqueue: 3 callbacks
suppressed
<5>[90430.580794] -(6)[4944:Binder:1454_13]alarmtimer_enqueue, 217799548000000
<5>[90430.582306] -(6)[4944:Binder:1454_13]alarmtimer_enqueue, 217799548000000
<6>[90430.814390] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:34%
<6>[90430.814489] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90430.814511] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90430.814520] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90430.814534] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90430.814543] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14923)
<6>[90430.814556] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33188,33543209,5450), tx=(12961,2001,10960), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90430.814632] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90430.889226] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90430.949997] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90430.950086] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90430.950140] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90430.950182] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90431.261878] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90431.277196] (3)[25513:kworker/3:4][bq27z561] fg_update_status:
SOC:59,Volt:3939,Cur:22,Temp:340,RM:2237,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90431.277359] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90431.279956] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90431.280674] (0)[118:pd_dbg_info]///PD dbg info 128d
<5>[90431.280700] (0)[118:pd_dbg_info]<90431.280>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90431.280700] <90431.280>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90431.293232] (3)[7406:kworker/3:2]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<5>[90431.495056] -(1)[0:swapper/1]lvts_paused = 1
<5>[90431.495147] -(1)[0:swapper/1]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90431.582126] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90431.582168] (1)[23436:kworker/u16:0]PM: Syncing filesystems ...
<7>[90431.582395] (1)[23436:kworker/u16:0]PM: ++
<7>[90431.591452] (1)[23436:kworker/u16:0]PM: --
<4>[90431.689945] done.
<5>[90431.694678] -(0)[0:swapper/0]lvts_paused = 1
<5>[90431.694753] -(0)[0:swapper/0]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90431.698826] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10185570,11446,17617scp1 sleep state: 54802,23408,23408
<6>[90431.698877] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90431.698877]
<6>[90431.698902] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90431.698902]
<6>[90431.698925] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90431.698925]
<6>[90431.698946] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90431.698946]
<5>[90431.698968] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90431.698986] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90431.699023] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90431.699052] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90431.699362] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90431.699394] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:43:22.814918952 UTC
<6>[90431.699594] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90431.699650] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90431.699677] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90431.699701] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90431.699862] (2)[576:logd.auditd]type=1400 audit(1671083002.812:1623058):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90431.701040] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90431.702371] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90431.702399] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90431.726971] (elapsed 0.027 seconds) done.
<6>[90431.727005] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90431.727024] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<3>[90431.786281] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:328
<3>[90431.786338] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90431.786415] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90431.787981] (2)[25368:kworker/u16:9]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90431.788217] (1)[23436:kworker/u16:0]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90431.788408] (1)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90431.788978] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90431.789104] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90431.789142] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90431.790084] (2)[25368:kworker/u16:9][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90431.790669] (2)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90431.790818] (1)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90431.790883] (1)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90431.791912] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90431.791940] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90431.791972] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90431.792794] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217799548000000 to 2022/12/15 05:44:33 (now = 2022/12/15 05:43:22)
<5>[90431.792914] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:44:34 (1)
<5>[90431.796423] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90431.796930] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90431.796971] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90431.796983] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90431.797101] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90431.797146] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90431.797196] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90431.797196]
<6>[90431.797219] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90431.797219]
<6>[90431.797242] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90431.797242]
<6>[90431.797263] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90431.797263]
<6>[90431.797387] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90431.797429] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90431.797454] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90431.798203] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90431.798294] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90431.798533] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90431.798915] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90431.798938] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90431.799416] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90431.799435] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90431.799869] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90431.800205] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,785 us
<6>[90431.801211] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90431.801514] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90431.801710] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90431.802128] (0)[10823:Binder:636_2]suspend of devices complete after 61.089
msecs
<6>[90431.809450] (0)[10823:Binder:636_2]late suspend of devices complete after
7.290 msecs
<4>[90431.809479] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90431.815668]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90431.816336] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90431.816718] (0)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90431.817536] (0)[10823:Binder:636_2]noirq suspend of devices complete after
7.214 msecs
<6>[90431.817760] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90431.817760] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90431.817760] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90431.817847] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90431.817847] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90431.817847] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 1173439, r13 = 0xc40019ac, debug_flag =
0xf80618ff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6163fb, req_sta =
0x1c000ff 0x0 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x25f0ffb7, wlk_cntcv_h = 0x293,
26M_off_pct = 81
<6>[90431.817847] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x0
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 35.810 seconds
<4>[90431.817847] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90431.817847] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90431.817847] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90431.817847] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90431.817847] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90431.817847] -(0)[0:swapper/0]Call trace:
<4>[90431.817847] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90431.817847] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90431.817847] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90431.817847] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90431.817847] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90431.817847] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90431.817847] -(0)[0:swapper/0] mt6885_show_message+0xbd0/0xe28
<4>[90431.817847] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90431.817847] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90431.817847] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90431.817847] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90431.817847] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90431.817847] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90431.817847] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90431.817847] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90431.817847] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90431.817847] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90431.817847] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90431.817847] -(0)[0:swapper/0]---[ end trace 308173880bd0bf8d ]---
<4>[90431.817847] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90431.817847] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90431.817847] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90431.817847] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90431.817847] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90431.817847] -(0)[0:swapper/0]Call trace:
<4>[90431.817847] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90431.817847] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90431.817847] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90431.817847] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90431.817847] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90431.817847] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90431.817847] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90431.817847] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90431.817847] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90431.817847] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90431.817847] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90431.817847] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90431.817847] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90431.817847] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90431.817847] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90431.817847] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90431.817847] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90431.817847] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90431.817847] -(0)[0:swapper/0]---[ end trace 308173880bd0bf8e ]---
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 959166 (32k)
<4>[90431.817847] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 29.271/35.335/36.085/30.449/36.6112 seconds
<6>[90431.817847] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90431.817971] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x80000, 0x0)
<6>[90431.818015] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90431.817985] -(0)[0:swapper/0]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90431.819766] (0)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_resume
<5>[90431.821201]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90431.821228] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90431.823296] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90431.828910] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.151 msecs
<6>[90431.829092] -(1)[0:swapper/1][ccci1/dpmaif]wake up by MD0 HIF L2(0/1)(3e0/0)!
<6>[90431.829142] (1)[0:swapper/1][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90431.829848] -(2)[10823:Binder:636_2][ccci1/dpmaif]tx1_resume_tx: 0x40000,
0x80000, 0x0
<6>[90431.829983] -(3)[0:swapper/3][ccci1/dpmaif]clear txq1_resume_done: 0x40000,
0x40000, 0x0
<6>[90431.830337] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccmni_md1
<4>[90431.830364] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90431.835452] (2)[10823:Binder:636_2]early resume of devices complete after
5.035 msecs
<5>[90431.835891] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90431.837889] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90431.838235] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90431.838272] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1584 us
<5>[90431.838544] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90431.839163] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90431.839190] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90431.839267] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90431.839299] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90431.839381] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90431.839576] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90431.839640] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90431.839663] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90431.839744] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90431.839786] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90431.839907] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90431.839932] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90431.839946] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90431.840091] (2)[10823:Binder:636_2]zcvf, no update time:37 96 avgc:0
avgc_thread
<5>[90431.840117] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90431.843734] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90431.844711] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90431.844804] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90431.845129] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90431.845164] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90431.846052] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90431.846206] (3)[30078:kworker/3:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90431.848057] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90431.848399] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90431.849238] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90431.849947] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90431.850508] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90431.852847] (0)[10823:Binder:636_2]resume of devices complete after 17.361
msecs
<3>[90431.857398] (0)[25356:kworker/0:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90431.857423] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90431.857840] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90431.857862] (0)[25356:kworker/0:1]Restarting tasks ...
<3>[90431.858053] (0)[25356:kworker/0:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90431.858085] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90431.864522] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90431.864720] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90431.864793] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90431.865188] -(5)[1893:AlarmManager]alarmtimer_enqueue, 217799548000000
<6>[90431.872975] (0)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(98)
<4>[90431.878358] done.
<5>[90431.878389] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90431.878405] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90431.882430] (6)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90431.887983] (6)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10187176,11845,18039scp1 sleep state: 54804,23408,23408
<6>[90431.888013] (6)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90431.888013]
<5>[90431.888026] (6)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90431.888036] (6)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90431.888051] -(6)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90431.888061] (6)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90431.889027] (6)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90431.889394] -(4)[406:EEMG_CTRL_GPU][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90431.889710] (6)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90431.889739] (6)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:43:58.819817414 UTC
<6>[90431.889887] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90431.889945] (6)[30505:kworker/6:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90431.889954] (6)[30505:kworker/6:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<36>[90431.889974] (2)[576:logd.auditd]type=1400 audit(1671083038.815:1623059):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90431.889987] (6)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90431.889996] (6)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90431.890093] (5)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90431.890907] (5)[10823:Binder:636_2]PM: suspend exit
<6>[90431.902898] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90431.911201] -(4)[1867:Binder:1454_3]alarmtimer_enqueue, 217799548000000
<5>[90431.912577] -(4)[1867:Binder:1454_3]alarmtimer_enqueue, 217799548000000
<3>[90431.936001] (3)[30078:kworker/3:3]typec_cc_orientation = 2
<6>[90431.949769] -(2)[7624:lowpool[175]][ccci1/dpmaif]tx0_resume_tx: 0x40000,
0xc0000, 0x0
<6>[90431.949874] -(1)[522:ueventd][ccci1/dpmaif]clear txq0_resume_done: 0x40000,
0xc0000, 0x0
<5>[90431.955911] -(5)[4336:Binder:1454_C]alarmtimer_enqueue, 217799548000000
<5>[90431.957913] -(5)[4944:Binder:1454_13]alarmtimer_enqueue, 217799548000000
<6>[90431.992952] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90431.992990] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90431.993030] (2)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90431.993047] (2)[10823:Binder:636_2]active wakeup source: ccmni_md1
<3>[90432.045260] (3)[30078:kworker/3:3]chg_type = 0, hvdcp_type = 0
<6>[90432.093688] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90432.147675] (3)[30078:kworker/3:3]get_connector_temp: connector_temp:329
<6>[90432.147915] (3)[30078:kworker/3:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90432.148383] (3)[30078:kworker/3:3]mt_charger_plugin plugin:0
<6>[90432.197093] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90432.470478] -(2)[0:swapper/2]lvts_paused = 1
<6>[90432.862827] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 1173439, r13 = 0xc40019ac, debug_flag =
0xf80618ff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6163fb, req_sta =
0x1c000ff 0x0 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe,
<6>[90432.862972] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90432.893916] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90432.914593] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90432.950396] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90432.950480] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90432.950532] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90432.950575] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90432.961415] (2)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3938,Cur:154,Temp:340,RM:2237,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90433.023086] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90433.023143] (2)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90433.023276] (2)[7405:kworker/u16:10]PM: ++
<7>[90433.032636] (2)[7405:kworker/u16:10]PM: --
<5>[90433.072619] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217799548000000
<4>[90433.130765] done.
<5>[90433.138863] -(2)[0:swapper/2]lvts_paused = 1
<6>[90433.139408] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10187233,11853,18057scp1 sleep state: 54806,23408,23408
<6>[90433.139437] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90433.139437]
<6>[90433.139461] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90433.139461]
<6>[90433.139484] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90433.139484]
<6>[90433.139506] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90433.139506]
<5>[90433.139527] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90433.139545] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90433.139581] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90433.139610] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<36>[90433.140252] (2)[576:logd.auditd]type=1400 audit(1671083040.067:1623060):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90433.149649] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90433.149687] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:44:00.079770029 UTC
<6>[90433.149876] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90433.149934] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90433.149962] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90433.149986] (4)[613:teei_daemon]Freezing user space processes ...
<5>[90433.151720] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90433.152664] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90433.152703] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90433.172216] (2)[10823:Binder:636_2]PM: Last active Wakeup Source: eventpoll
<3>[90433.172257] (2)[10823:Binder:636_2]Freezing of tasks aborted after 0.022
seconds
<6>[90433.172279] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90433.172296] (0)[1316:vdec_log_info]Restarting tasks ...
<6>[90433.178660] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90433.178786] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90433.179460] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90433.194666] done.
<5>[90433.194705] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90433.194725] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90433.198979] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90433.203745] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10187236,11859,18077scp1 sleep state: 54808,23408,23408
<6>[90433.203775] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90433.203775]
<5>[90433.203795] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90433.203811] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90433.203833] -(2)[10823:Binder:636_2]Abort: Last active Wakeup Source:
eventpoll
<5>[90433.203851] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90433.204840] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90433.205767] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90433.205814] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:44:00.135881183 UTC
<6>[90433.206020] (2)[7519:kworker/2:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:4><0x1d5f>
<6>[90433.206143] (2)[7519:kworker/2:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90433.206160] (2)[7519:kworker/2:4]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90433.206177] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90433.206211] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90433.206244] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90433.206264] (2)[10823:Binder:636_2]PM: suspend exit
<36>[90433.206612] (3)[576:logd.auditd]type=1400 audit(1671083040.131:1623061):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90433.279310] -(1)[4944:Binder:1454_13]alarmtimer_enqueue, 217799548000000
<5>[90433.281405] -(1)[4944:Binder:1454_13]alarmtimer_enqueue, 217799548000000
<4>[90433.287449] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 634,
773, 542, 572, 258, 142, 156, 81, success counter cpu: 100, 147, 96, 110, 37, 22,
8, 7, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 183, 231,
185, 210, 70, 36, 17, 10, o: 4-7, p: , f: , t: 90433458548000, 90433416000000,
90433416000000, 90433416000000, 90433416000000, 90433548901696, 90433724000000,
90433548932080,
<6>[90433.409243] (4)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90433.409272] (5)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90433.409583] (5)[7405:kworker/u16:10]PM: ++
<7>[90433.416403] (5)[7405:kworker/u16:10]PM: --
<14>[90433.431451] (1)[568:logd.reader]logd: logdr: UID=10182 GID=10182 PID=8702 n
tail=0 logMask=4 pid=0 start=1671082346269000000ns deadline=97633410921234ns
<4>[90433.517216] done.
<6>[90433.527209] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10187250,11866,18094scp1 sleep state: 54810,23408,23408
<6>[90433.527261] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90433.527261]
<6>[90433.527286] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90433.527286]
<6>[90433.527308] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90433.527308]
<6>[90433.527330] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90433.527330]
<5>[90433.527352] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90433.527370] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90433.527401] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90433.527443] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90433.527768] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90433.527801] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:44:00.457885183 UTC
<6>[90433.528034] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90433.528092] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90433.528119] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90433.528142] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90433.528275] (3)[576:logd.auditd]type=1400 audit(1671083040.455:1623062):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90433.529354] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<4>[90433.556913] (elapsed 0.028 seconds) done.
<6>[90433.556951] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90433.556970] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90433.613059] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:329
<3>[90433.613107] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90433.613175] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90433.614652] (3)[23443:kworker/u16:5]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90433.614921] (3)[7405:kworker/u16:10]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90433.615116] (0)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90433.615293] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90433.615399] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90433.615435] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90433.616308] (0)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90433.617216] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90433.617232] (3)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90433.617281] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90433.617960] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90433.617988] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90433.618019] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90433.618857] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217799548000000 to 2022/12/15 05:44:33 (now = 2022/12/15 05:44:00)
<5>[90433.618976] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:44:34 (1)
<5>[90433.622051] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90433.622501] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90433.622542] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90433.622553] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90433.622825] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90433.622877] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90433.622928] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90433.622928]
<6>[90433.622952] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90433.622952]
<6>[90433.622974] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90433.622974]
<6>[90433.622996] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90433.622996]
<6>[90433.623118] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90433.623163] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90433.623187] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90433.623862] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90433.623951] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90433.624191] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90433.624586] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90433.624609] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90433.625078] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90433.625097] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90433.625596] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90433.625980] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,898 us
<6>[90433.626831] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90433.627121] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90433.627256] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90433.627684] (2)[10823:Binder:636_2]suspend of devices complete after 55.862
msecs
<6>[90433.633336] (2)[10823:Binder:636_2]late suspend of devices complete after
5.621 msecs
<4>[90433.633364] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90433.638169]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90433.638799] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90433.639148] (0)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90433.639791] (2)[10823:Binder:636_2]noirq suspend of devices complete after
5.569 msecs
<6>[90433.639872] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90433.639872] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90433.639872] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90433.639949] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90433.639949] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90433.639949] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90433.639949] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90433.639949] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90433.639949] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 1104362, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x4178a11f, wlk_cntcv_h = 0x293, 26M_off_pct =
20
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 33.702 seconds
<4>[90433.639949] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90433.639949] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90433.639949] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90433.639949] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90433.639949] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90433.639949] -(2)[0:swapper/2]Call trace:
<4>[90433.639949] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90433.639949] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90433.639949] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90433.639949] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90433.639949] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90433.639949] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90433.639949] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90433.639949] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90433.639949] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90433.639949] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90433.639949] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90433.639949] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90433.639949] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90433.639949] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90433.639949] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90433.639949] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90433.639949] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90433.639949] -(2)[0:swapper/2]---[ end trace 308173880bd0bf8f ]---
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 204347 (32k)
<4>[90433.639949] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 6.236/17.697/33.587/8.286/33.3629 seconds
<6>[90433.639949] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90433.639949] -(2)[0:swapper/2]EINT 222 is pending
<6>[90433.640089] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0xc0000, 0x0)
<6>[90433.640135] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90433.640108] -(2)[0:swapper/2]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90433.642582] (4)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_resume
<5>[90433.643707]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90433.643735] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90433.645841] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90433.651697] (0)[10823:Binder:636_2]noirq resume of devices complete after
10.743 msecs
<6>[90433.651961] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90433.652094] -(1)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90433.652190] -(1)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90433.652238] (1)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90433.652245] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd]
<4>[90433.652260] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90433.657744] (0)[10823:Binder:636_2]early resume of devices complete after
5.420 msecs
<5>[90433.658511] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90433.660414] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90433.660745] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90433.660787] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1582 us
<5>[90433.661057] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90433.661860] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90433.661888] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90433.661969] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90433.662002] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90433.662103] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90433.662304] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90433.662366] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90433.662389] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90433.662473] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90433.662515] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90433.662641] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90433.662667] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90433.662680] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90433.662824] (0)[10823:Binder:636_2]zcvf, no update time:73 96 avgc:0
avgc_thread
<5>[90433.662853] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90433.666076] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90433.667173] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90433.667266] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90433.667631] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90433.667779] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90433.668325] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90433.668508] (0)[3064:kworker/0:0][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90433.671141] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90433.671652] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90433.672805] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90433.673042] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90433.673416] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90433.675950] (2)[10823:Binder:636_2]resume of devices complete after 18.171
msecs
<6>[90433.681763] (3)[10823:Binder:636_2]OOM killer enabled.
<3>[90433.681787] (2)[7519:kworker/2:4]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90433.681803] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<6>[90433.681819] (2)[7519:kworker/2:4]Restarting tasks ...
<3>[90433.682359] (2)[7519:kworker/2:4]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90433.682390] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90433.689031] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90433.689044] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90433.689850] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90433.695938] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217841596000000
<4>[90433.702261] done.
<5>[90433.702334] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90433.702355] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90433.706540] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90433.714774] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10188746,12243,18492scp1 sleep state: 54812,23417,23417
<6>[90433.714811] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90433.714811]
<5>[90433.714833] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90433.714848] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90433.714875] -(3)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90433.714893] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90433.715968] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90433.716157] -(0)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90433.716712] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90433.716760] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:44:34.353009416 UTC
<6>[90433.717003] (3)[23446:kworker/3:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:1><0x5b96>
<6>[90433.717098] (3)[23446:kworker/3:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90433.717113] (3)[23446:kworker/3:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90433.717851] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90433.717917] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90433.717955] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90433.720038] (0)[10823:Binder:636_2]PM: suspend exit
<5>[90433.723893] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217841596000000
<6>[90433.750045] -(4)[28286:Connection Cont][ccci1/dpmaif]tx0_resume_tx: 0x40000,
0xc0000, 0x0
<6>[90433.750437] -(4)[1610:android.fg][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0xc0000, 0x0
<3>[90433.759693] (0)[3064:kworker/0:0]typec_cc_orientation = 2
<6>[90433.821265] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90433.821308] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90433.821350] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<3>[90433.866391] (0)[3064:kworker/0:0]chg_type = 0, hvdcp_type = 0
<4>[90433.886350] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90433.886388] -(4)[7032:kworker/4:0]active wake lock : main,last_time:90433799
<4>[90433.886399] -(4)[7032:kworker/4:0]active wake lock : usb,last_time:90433797
<4>[90433.886428] -(4)[7032:kworker/4:0]active wake lock : ttyC0,last_time:90433877
<6>[90433.917669] (0)[7416:kworker/0:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90433.922929] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90434.022943] (0)[7416:kworker/0:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90434.072586] (0)[3064:kworker/0:0]get_connector_temp: connector_temp:330
<6>[90434.072836] (0)[3064:kworker/0:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90434.073312] (0)[3064:kworker/0:0]mt_charger_plugin plugin:0
<6>[90434.270157] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90434.270201] (1)[23438:kworker/u16:4]PM: Syncing filesystems ...
<7>[90434.270435] (1)[23438:kworker/u16:4]PM: ++
<7>[90434.279686] (3)[23438:kworker/u16:4]PM: --
<4>[90434.381791] done.
<6>[90434.387427] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10188774,12267,18527scp1 sleep state: 54814,23417,23417
<6>[90434.387466] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90434.387466]
<6>[90434.387491] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90434.387491]
<6>[90434.387513] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90434.387513]
<6>[90434.387535] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90434.387535]
<5>[90434.387556] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90434.387574] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90434.387607] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90434.387635] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90434.387885] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90434.387917] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:44:35.024184877 UTC
<6>[90434.388098] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90434.388154] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90434.388181] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90434.388204] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90434.388328] (1)[576:logd.auditd]type=1400 audit(1671083075.020:1623064):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90434.389445] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90434.390845] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90434.390870] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90434.414700] (elapsed 0.026 seconds) done.
<6>[90434.414733] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90434.414752] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<3>[90434.469355] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:329
<3>[90434.469398] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90434.469462] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90434.470891] (3)[23438:kworker/u16:4]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90434.472999] (3)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<5>[90434.473178] (3)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<3>[90434.473397] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<5>[90434.473604] (3)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90434.473806] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90434.475038] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90434.475151] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90434.475187] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90434.475947] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90434.477359] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90434.477396] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90434.477424] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90434.478292] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217841596000000 to 2022/12/15 05:45:15 (now = 2022/12/15 05:44:34)
<5>[90434.478451] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:45:16 (1)
<5>[90434.482136] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90434.482556] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90434.482595] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90434.482606] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90434.482713] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90434.482756] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90434.482800] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90434.482800]
<6>[90434.482823] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90434.482823]
<6>[90434.482844] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90434.482844]
<6>[90434.482866] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90434.482866]
<6>[90434.482975] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90434.483016] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90434.483039] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90434.483655] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90434.483738] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90434.483963] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90434.484304] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90434.484326] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90434.484742] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90434.484760] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90434.485697] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90434.486007] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,1259 us
<6>[90434.486946] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90434.487217] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90434.487338] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90434.487739] (3)[10823:Binder:636_2]suspend of devices complete after 58.750
msecs
<6>[90434.494795] (3)[10823:Binder:636_2]late suspend of devices complete after
7.027 msecs
<4>[90434.494822] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90434.500534]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90434.501162] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90434.501601] (3)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90434.502391] (3)[10823:Binder:636_2]noirq suspend of devices complete after
6.889 msecs
<6>[90434.502471] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90434.502471] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90434.502471] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90434.502549] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90434.502549] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90434.502549] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90434.502549] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90434.502549] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90434.502549] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 1347868, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x6203ed97, wlk_cntcv_h = 0x293, 26M_off_pct =
63
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 41.133 seconds
<4>[90434.502549] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90434.502549] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90434.502549] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90434.502549] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90434.502549] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90434.502549] -(3)[0:swapper/3]Call trace:
<4>[90434.502549] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90434.502549] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90434.502549] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90434.502549] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90434.502549] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90434.502549] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90434.502549] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90434.502549] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90434.502549] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90434.502549] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90434.502549] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90434.502549] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90434.502549] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90434.502549] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90434.502549] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90434.502549] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90434.502549] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90434.502549] -(3)[0:swapper/3]---[ end trace 308173880bd0bf90 ]---
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 817942 (32k)
<4>[90434.502549] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 24.961/32.007/39.911/26.688/40.136 seconds
<6>[90434.502549] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90434.502549] -(3)[0:swapper/3]EINT 222 is pending
<6>[90434.502691] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0xc0000, 0x0)
<6>[90434.502735] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90434.502709] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90434.505042] (3)[23443:kworker/u16:5]mtu3_phone musb-hdrc: mtu3_resume
<5>[90434.506271]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90434.506297] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90434.508340] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90434.514496] (3)[10823:Binder:636_2]noirq resume of devices complete after
11.065 msecs
<6>[90434.514754] (2)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90434.514877] -(2)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90434.514972] -(2)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90434.515019] (2)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90434.515051] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] [timerfd] mt6359-rtc
<4>[90434.515075] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90434.520224] (3)[10823:Binder:636_2]early resume of devices complete after
5.036 msecs
<5>[90434.520668] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90434.522944] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90434.523230] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90434.523271] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1565 us
<5>[90434.523546] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90434.524245] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90434.524273] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90434.524356] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90434.524388] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90434.524477] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90434.524682] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90434.524744] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90434.524768] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90434.524851] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90434.524893] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90434.525018] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90434.525044] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90434.525058] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90434.525212] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90434.528445] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90434.529474] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90434.529632] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90434.529949] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90434.529984] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90434.530807] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90434.530959] (3)[25513:kworker/3:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90434.533036] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90434.533404] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90434.533770] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90434.535324] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90434.535346] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90434.537670] (1)[10823:Binder:636_2]resume of devices complete after 17.411
msecs
<3>[90434.540959] (1)[25366:kworker/1:4]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90434.540971] (1)[25366:kworker/1:4][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90434.541698] (1)[25366:kworker/1:4]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90434.541720] (1)[25366:kworker/1:4][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90434.541929] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90434.541948] (7)[1314:receiver]Restarting tasks ...
<6>[90434.548221] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90434.548260] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90434.548292] (7)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90434.561395] done.
<5>[90434.561418] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90434.561427] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90434.563140] -(6)[7376:Blob Reader (0)][ccci1/dpmaif]tx0_resume_tx: 0xc0000,
0xc0000, 0x0
<6>[90434.563530] -(6)[7376:Blob Reader (0)][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0xc0000, 0x0
<5>[90434.564592] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90434.572533] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10190579,12738,19027scp1 sleep state: 54816,23417,23417
<6>[90434.572559] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90434.572559]
<5>[90434.572571] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90434.572579] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90434.572593] -(1)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90434.572603] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90434.573668] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90434.573764] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90434.574286] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90434.574316] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:45:16.347973109 UTC
<6>[90434.574455] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<6>[90434.574515] (1)[25366:kworker/1:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90434.574524] (1)[25366:kworker/1:4]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90434.574539] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90434.574571] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<36>[90434.574579] (2)[576:logd.auditd]type=1400 audit(1671083116.344:1623065):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90434.574602] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90434.575288] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90434.584124] -(7)[28286:Connection Cont][ccci1/dpmaif]tx1_resume_tx: 0x40000,
0xc0000, 0x0
<6>[90434.585589] -(5)[853:[email protected]][ccci1/dpmaif]clear txq1_resume_done:
0x40000, 0x40000, 0x0
<3>[90434.619225] (3)[2356:kworker/3:5]typec_cc_orientation = 2
<6>[90434.676020] (4)[10823:Binder:636_2]active wakeup source: WLAN timeout
<6>[90434.676053] (4)[10823:Binder:636_2]active wakeup source: main
<6>[90434.676059] (4)[10823:Binder:636_2]active wakeup source: usb
<6>[90434.676082] (4)[10823:Binder:636_2]active wakeup source: ttyC0
<4>[90434.712051] -(7)[3650:NetworkPolicy]CPU7: update max cpu_capacity 934
<36>[90434.714786] (0)[576:logd.auditd]type=1400 audit(1671083116.480:1623066):
avc: denied { read } for comm="Binder:636_3" name="wakeup38" dev="sysfs" ino=53173
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90434.715001] (0)[576:logd.auditd]type=1400 audit(1671083116.480:1623067):
avc: denied { read } for comm="Binder:636_3" name="wakeup28" dev="sysfs" ino=49384
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90434.715240] (0)[576:logd.auditd]type=1400 audit(1671083116.484:1623068):
avc: denied { read } for comm="Binder:636_3" name="wakeup18" dev="sysfs" ino=45075
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90434.715471] (0)[576:logd.auditd]type=1400 audit(1671083116.484:1623069):
avc: denied { read } for comm="Binder:636_3" name="wakeup26" dev="sysfs" ino=49169
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<4>[90434.715743] (3)[7478:Binder:636_3]audit: audit_lost=1445247
audit_rate_limit=5 audit_backlog_limit=64
<3>[90434.715754] (3)[7478:Binder:636_3]audit: rate limit exceeded
<6>[90434.725728] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<4>[90434.754299] -(4)[1454:system_server]alarmtimer_enqueue: 16 callbacks
suppressed
<5>[90434.754308] -(4)[1454:system_server]alarmtimer_enqueue, 217847584000000
<5>[90434.754446] -(4)[1454:system_server]alarmtimer_enqueue, 217847584000000
<3>[90434.774631] (3)[2356:kworker/3:5]chg_type = 0, hvdcp_type = 0
<5>[90434.797037] -(1)[1610:android.fg]alarmtimer_enqueue, 217847584000000
<5>[90434.797371] -(7)[1867:Binder:1454_3]alarmtimer_enqueue, 217847584000000
<5>[90434.797439] -(7)[1867:Binder:1454_3]alarmtimer_enqueue, 217847584000000
<3>[90434.828435] (3)[2356:kworker/3:5]get_connector_temp: connector_temp:331
<6>[90434.828470] (3)[2356:kworker/3:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90434.828500] (3)[2356:kworker/3:5]mt_charger_plugin plugin:0
<6>[90434.880734] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90434.930722] (7)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90434.950758] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90434.950815] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90434.950852] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90434.950866] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90434.952347] (0)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<4>[90435.001575] (7)[7642:lowpool[176]]CPU7: update max cpu_capacity 953
<3>[90435.294681] (1)[857:[email protected]][mtk_nanohub]sensor_id id 83,
sensor_type:84
<12>[90435.303209] (6)[853:[email protected]]healthd: battery l=59 v=3937 t=34.0 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<6>[90435.303226] (3)[977:HwBinder:852_1]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<6>[90435.303242] (3)[977:HwBinder:852_1]CRTC0 hold wakelock
mtk_drm_crtc_atomic_resume 4888
<6>[90435.303262] (3)[977:HwBinder:852_1][mtk_crtc_is_dual_pipe line:1212]
<6>[90435.303267] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1258]j:0,com_nr:12,path_len:12
<6>[90435.303277] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 22
<6>[90435.303283] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 19
<6>[90435.303289] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 28
<6>[90435.303295] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 34
<6>[90435.303300] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 40
<6>[90435.303306] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 6
<6>[90435.303312] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 4
<6>[90435.303317] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 59
<6>[90435.303322] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 1
<6>[90435.303328] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 15
<6>[90435.303333] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 51
<6>[90435.303338] (3)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 9
<6>[90435.305452] (3)[977:HwBinder:852_1]mtk_dsi_poweron: clk_refcnt = 2, skip
power on
<6>[90435.306323] (3)[977:HwBinder:852_1][mtk_disp_mutex_submit_sof line:6712]
<6>[90435.306419] (3)[977:HwBinder:852_1][mtk_ddp_connect_dual_pipe_path
line:6203]
<6>[90435.306430] (3)[977:HwBinder:852_1]connect dual pipe path
<6>[90435.306483] (3)[977:HwBinder:852_1]mtk_disp_mutex_src_set, id:12, val:0x41
<6>[90435.306500] (3)[977:HwBinder:852_1]
<6>[90435.306549] (3)[977:HwBinder:852_1]
<6>[90435.306566] (3)[977:HwBinder:852_1][mtk_rdma_config line:837]
<6>[90435.306733] (3)[977:HwBinder:852_1][mtk_crtc_config_default_path line:4499]
<6>[90435.306741] (3)[977:HwBinder:852_1]
<6>[90435.306759] (3)[977:HwBinder:852_1]
<6>[90435.306769] (1)[977:HwBinder:852_1][mtk_rdma_config line:837]
<6>[90435.307468] (1)[977:HwBinder:852_1]mtk_disp_esd_check_switch 1
<6>[90435.307524] (1)[977:HwBinder:852_1]mtk_output_dsi_enable +, new_doze_state =
0, dsi->doze_enabled = 0, output = 0 dsi->mi_cfg.crc_state = 5
<6>[90435.307532] (1)[977:HwBinder:852_1]lcm_prepare+
<3>[90435.307537] (1)[977:HwBinder:852_1]lcm_panel_vm18_enable +
<3>[90435.307562] (1)[977:HwBinder:852_1]lcm_panel_vm18_enable
regulator_is_enabled=0
<3>[90435.309645] (1)[977:HwBinder:852_1]lcm_panel_vm18_enable -
<3>[90435.310661] (1)[977:HwBinder:852_1]lcm_panel_dvdd_enable +
<3>[90435.310877] (1)[977:HwBinder:852_1]lcm_panel_dvdd_enable
regulator_is_enabled=0
<3>[90435.311082] (1)[977:HwBinder:852_1][wl2866d_masked_write] : Writing 0x02 to
0x000e with mask 0x02
<3>[90435.311423] (1)[977:HwBinder:852_1][wl2866d_regulator_enable] : [wl2866d-
dvdd2][1] regulator enable
<3>[90435.311435] (1)[977:HwBinder:852_1]lcm_panel_dvdd_enable -
<6>[90435.312529] (1)[977:HwBinder:852_1]lm36273_bl_bias_conf backlight and bias
setting
<6>[90435.312826] (3)[977:HwBinder:852_1]lm36273_bias_enable enable = 1
<12>[90435.320535] (6)[853:[email protected]]healthd: battery l=59 v=3937 t=34.0 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90435.320563] (6)[853:[email protected]]healthd: battery l=59 v=3937 t=34.0 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90435.328726] (4)[853:[email protected]]healthd: battery l=59 v=3937 t=34.0 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<6>[90435.333584] (3)[977:HwBinder:852_1]lcm_prepare-
<6>[90435.333618] (3)[977:HwBinder:852_1]mtk_dsi_poweron: clk_refcnt = 3, skip
power on
<6>[90435.334758] (2)[977:HwBinder:852_1]
[mi_disp:mi_dsi_display_wakeup_pending_doze_work] [info]pending_doze_cnt = 0
<6>[90435.346672] (1)[857:[email protected]][NVT-ts-spi] nvt_palm_sensor_write 1735:
enter 1 0
<6>[90435.346699] (1)[857:[email protected]]palm_sensor_store value:1
<6>[90435.349053] (0)[1888:CachedAppOptimi]stop reclaim: force
<15>[90435.369777] (5)[7665:Binder:564_1]vold: The trim thread is not running
<15>[90435.369940] (5)[7665:Binder:564_1]vold: idle maintenance stopped
<6>[90435.374039] (1)[977:HwBinder:852_1]push_table 0: 1
<6>[90435.374065] (1)[977:HwBinder:852_1]push_table 1: 1
<6>[90435.374094] (1)[977:HwBinder:852_1]push_table 2: 5
<6>[90435.374123] (1)[977:HwBinder:852_1]push_table 3: 1
<6>[90435.374140] (1)[977:HwBinder:852_1]push_table 4: 2
<6>[90435.374163] (1)[977:HwBinder:852_1]push_table 5: 1
<6>[90435.374179] (1)[977:HwBinder:852_1]push_table 6: 1
<6>[90435.374196] (1)[977:HwBinder:852_1]push_table 7: 1
<6>[90435.374213] (1)[977:HwBinder:852_1]push_table 8: 1
<6>[90435.374230] (1)[977:HwBinder:852_1]push_table 9: 1
<6>[90435.374247] (1)[977:HwBinder:852_1]push_table 10: 1
<6>[90435.374264] (1)[977:HwBinder:852_1]push_table 11: 1
<6>[90435.374281] (1)[977:HwBinder:852_1]push_table 12: 1
<6>[90435.374298] (1)[977:HwBinder:852_1]push_table 13: 1
<6>[90435.374315] (1)[977:HwBinder:852_1]push_table 14: 1
<6>[90435.374331] (1)[977:HwBinder:852_1]push_table 15: 1
<6>[90435.374348] (1)[977:HwBinder:852_1]push_table 16: 1
<6>[90435.374365] (1)[977:HwBinder:852_1]push_table 17: 1
<6>[90435.374383] (1)[977:HwBinder:852_1]push_table 18: 1
<6>[90435.374400] (1)[977:HwBinder:852_1]push_table 19: 1
<6>[90435.374418] (1)[977:HwBinder:852_1]push_table 20: 1
<6>[90435.374435] (1)[977:HwBinder:852_1]push_table 21: 1
<6>[90435.374453] (1)[977:HwBinder:852_1]push_table 22: 1
<6>[90435.374469] (1)[977:HwBinder:852_1]push_table 23: 1
<6>[90435.374486] (1)[977:HwBinder:852_1]push_table 24: 1
<6>[90435.374502] (1)[977:HwBinder:852_1]push_table 25: 1
<6>[90435.374519] (1)[977:HwBinder:852_1]push_table 26: 1
<6>[90435.374536] (1)[977:HwBinder:852_1]push_table 27: 1
<6>[90435.374553] (1)[977:HwBinder:852_1]push_table 28: 16
<6>[90435.374603] (1)[977:HwBinder:852_1]push_table 29: 2
<6>[90435.374626] (1)[977:HwBinder:852_1]push_table 30: 2
<6>[90435.374649] (1)[977:HwBinder:852_1]push_table 31: 1
<6>[90435.374665] (1)[977:HwBinder:852_1]push_table 32: 1
<6>[90435.374682] (1)[977:HwBinder:852_1]push_table 33: 1
<6>[90435.374699] (1)[977:HwBinder:852_1]push_table 34: 1
<6>[90435.374716] (1)[977:HwBinder:852_1]push_table 35: 1
<6>[90435.374733] (1)[977:HwBinder:852_1]push_table 36: 1
<6>[90435.374750] (1)[977:HwBinder:852_1]push_table 37: 1
<6>[90435.374767] (1)[977:HwBinder:852_1]push_table 38: 1
<6>[90435.374783] (1)[977:HwBinder:852_1]push_table 39: 1
<6>[90435.374799] (1)[977:HwBinder:852_1]push_table 40: 1
<6>[90435.374816] (1)[18333:HwBinder:851_3]push_table 41: 0
<3>[90435.396866] (1)[18333:HwBinder:851_3][ION][ion_dbg] alloc_pages order=4
cache=0
<5>[90435.404952] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(12)(3)(3) (15)(14)(1)(1)
<4>[90435.407577] -(7)[4001:m.android.phone]CPU7: update max cpu_capacity 631
<6>[90435.409828] (7)[845:[email protected]][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90435.409846] (7)[845:[email protected]][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x04900124], desc[BLE_SCAN]
<6>[90435.413970] (5)[845:[email protected]][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90435.413989] (5)[845:[email protected]][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x00000000], desc[BLE_SCAN]
<6>[90435.419220] (2)[845:[email protected]][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90435.419244] (2)[845:[email protected]][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x19991999], desc[BLE_SCAN]
<5>[90435.430124] (1)[25366:kworker/1:4][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90435.434706] (7)[2251:kworker/u17:4][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(12)(3)(3) (15)(13)(1)(1)
<6>[90435.436435] (4)[1683:SystemPressureC]psi_write: new:000000009f05ad2e
<5>[90435.445090] (7)[2251:kworker/u17:4][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(10)(3)(3) (15)(13)(1)(1)
<6>[90435.445464] (5)[3752:main_thread]<FW>PWR INFO-1: 1 b2 2 b 52a4c3b 26 0 31be4
0 4f2 0 1295769 0 0 0 5c505cf 0 527fe0c 1ce 0 0 0 0 1 1a9 0 0 0 24 0 0 0 0 0 0 0 0
52714d8 4ed 0 0 0 0 4b0 0 0 0 0 21 0 0 1c 0 0 0 0 0 520c3a0 9889b 0 0 0 0 1b2f 1bb0
0 0 0 37c 0 3cc 119 0 26 c7 0 0 94c57 5a4 18 58
<6>[90435.446261] (5)[3752:main_thread]<FW>PWR INFO-2: 18 70 292 10b9 d45 1bf3 0 0
11 43 0 0 0 0 f0373ff0 52a4c26 f0349430 52a4c28 f0373ff0 52a4c2c f0373ff0 52a4c32
f0373ff0 52a4c38 131 5a 3 0 0 0 0 115 0 8a 50 0 0 428 0 0 0 0 0 0 0 0 1344 1af 0 0
0 0 0 0 107 0 1498 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
<6>[90435.446600] (5)[3752:main_thread]<FW>PWR INFO-3: 0 0 0 0 125 2 0 0 0 0 0
80010000 90030064 10000 10000 e 33 116 cb 0 0 0 0 0 407 32 0
<6>[90435.453611] -(5)[4451:RenderThread]push_table 43: 0
<4>[90435.467490] -(5)[4451:RenderThread]CPU5: update max cpu_capacity 692
<5>[90435.469108] (3)[2251:kworker/u17:4][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90435.477593] (3)[563:psimon]update_triggers: group:000000007fa854f1
t:000000009f05ad2e triggered!
<6>[90435.477790] (2)[3985:PsiThread]psi_trigger_poll: t:000000009f05ad2e
triggered!
<3>[90435.490483] (1)[857:[email protected]][mtk_nanohub]sensor_id id 26,
sensor_type:27
<6>[90435.493598] (1)[977:HwBinder:852_1]push_table 45: 1
<6>[90435.493627] (1)[977:HwBinder:852_1]push_table 46: 1
<6>[90435.493656] (1)[977:HwBinder:852_1]push_table 47: 1
<6>[90435.493674] (1)[977:HwBinder:852_1]push_table 48: 1
<6>[90435.493692] (1)[977:HwBinder:852_1]push_table 49: 1
<6>[90435.493708] (1)[977:HwBinder:852_1]push_table 50: 1
<6>[90435.493726] (1)[977:HwBinder:852_1]push_table 51: 1
<6>[90435.493742] (1)[977:HwBinder:852_1]lcm_panel_init- k10a-36-02-0a
<6>[90435.493778] (1)[977:HwBinder:852_1][NVT-ts-spi] nvt_drm_notifier_callback
3003: event=1, *blank=0
<6>[90435.493811] (1)[977:HwBinder:852_1][info] fpc_fb_notif_callback value = 1
blank = 0
<6>[90435.493817] (1)[977:HwBinder:852_1][info] fpc_fb_notif_callback lcd on
notify
<6>[90435.493825] (1)[977:HwBinder:852_1]mtk_output_dsi_enable -
<6>[90435.493849] (6)[7539:kworker/u17:0][NVT-ts-spi] nvt_ts_resume 2924: start
<6>[90435.493859] (6)[7539:kworker/u17:0][NVT-ts-spi] update_firmware_request 321:
filename is novatek_nt36672c_k10a_fw01.bin
<6>[90435.493867] (6)[7539:kworker/u17:0][NVT-ts-spi] nvt_get_fw_need_write_size
75: fw_need_write_size = 131072(0x20000), NVT end flag
<6>[90435.493872] (6)[7539:kworker/u17:0][NVT-ts-spi] nvt_bin_header_parser 182:
ovly_info = 1, ilm_dlm_num = 2, ovly_sec_num = 2, info_sec_num = 13, partition = 17
<6>[90435.494218] (1)[977:HwBinder:852_1]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<4>[90435.494333] (1)[977:HwBinder:852_1]thermal_sys:
screen_state_for_thermal_callback: FB_BLANK_UNBLANK
<5>[90435.494371] (1)[977:HwBinder:852_1][Power/PPM] @ppm_lcmoff_switch: onoff = 1
<6>[90435.494374] (1)[977:HwBinder:852_1]#@# cm_mgr_fb_notifier_callback(581)
SCREEN ON
<6>[90435.494402] (1)[977:HwBinder:852_1]@@@@@@@@@@ Conninfra enter UNBLANK
@@@@@@@@@@@@@@
<6>[90435.494409] (1)[977:HwBinder:852_1][btmtk_info] btmtk_fb_notifier_callback:
blank state [0]->[1], and send cmd
<6>[90435.494413] (1)[977:HwBinder:852_1][btmtk_info] [InternalCmd]
btmtk_intcmd_wmt_blank_status
<6>[90435.494590] (1)[1035:mi_thermald]conninfra@(opfunc_pre_cal_prepare:981)
[opfunc_pre_cal_prepare] [pre_cal] bt=[1] wf=[1] status=[4]
<6>[90435.494814] (1)[1035:mi_thermald]charger_manager_set_prop_system_temp_level:
charger_online=0, temp_level=0
<6>[90435.497781] (1)[977:HwBinder:852_1][btmtk_info] btmtk_btif_send_and_recv,
ret = 499
<6>[90435.497791] (1)[977:HwBinder:852_1][btmtk_info] [InternalCmd]
btmtk_intcmd_wmt_blank_status done, result = WMT_EVT_SUCCESS
<6>[90435.500899] (3)[926:displayeffect]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90435.500,L:22 L:22 map:22
<6>[90435.500933] (3)[926:displayeffect]mi-dsi-panel:
[dsi_panel_set_disp_param:1605] dsi_panel_set_disp_param-1605:dsi =
000000006c42e980, cmd = 0x30000001
<4>[90435.501743] -(5)[518:init]CPU5: update max cpu_capacity 864
<6>[90435.511968] (2)[1367:AALMain]lm36273_brightness_set: bl level = 20, tmp_bl =
404, hbm level = 0
<6>[90435.512630] (3)[1367:AALMain]lm36273_brightness_set: enable level = 20
<4>[90435.534681] -(5)[1271:app]CPU5: update max cpu_capacity 692
<4>[90435.552869] -(5)[4132:DefaultDispatch]CPU5: update max cpu_capacity 476
<4>[90435.558982] -(7)[1611:android.ui]CPU7: update max cpu_capacity 631
<6>[90435.581659] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<4>[90435.587277] -(5)[1611:android.ui]CPU5: update max cpu_capacity 864
<6>[90435.594616] (5)[7539:kworker/u17:0][NVT-ts-spi] nvt_update_firmware 1180:
Update firmware success! <100733 us>
<6>[90435.594699] (5)[7539:kworker/u17:0][NVT-ts-spi] nvt_get_fw_info 677: FW type
is 0x01, fw_ver=11
<6>[90435.594810] (6)[7539:kworker/u17:0][NVT-ts-spi] nvt_read_pid 603: PID=5950
<6>[90435.605003] (5)[7539:kworker/u17:0][NVT-ts-spi] nvt_irq_enable 169:
enable=1, desc->depth=0
<6>[90435.605021] (5)[7539:kworker/u17:0][NVT-ts-spi] nvt_ts_resume 2954:
palm_sensor_switch=1
<6>[90435.605024] (5)[7539:kworker/u17:0][NVT-ts-spi] nvt_ts_resume 2956: palm
sensor on status, switch to on
<6>[90435.605037] (5)[7539:kworker/u17:0][NVT-ts-spi] nvt_set_pocket_palm_switch
580: set pocket palm switch: 1
<6>[90435.632389] (3)[2356:kworker/3:5][bq27z561] fg_update_status:
SOC:59,Volt:3927,Cur:651,Temp:342,RM:2234,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90435.632433] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90435.633469] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90435.633716] (5)[118:pd_dbg_info]///PD dbg info 128d
<5>[90435.633721] (5)[118:pd_dbg_info]<90435.633>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90435.633721] <90435.633>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90435.639933] (3)[23446:kworker/3:1]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<6>[90435.645718] (1)[7539:kworker/u17:0][NVT-ts-spi] nvt_set_pocket_palm_switch
611: nvt_set_pocket_palm_switch --
<6>[90435.645738] (1)[7539:kworker/u17:0][NVT-ts-spi] nvt_ts_resume 2976: end
<12>[90435.648552] (6)[853:[email protected]]healthd: battery l=59 v=3927 t=34.2 h=2
st=3 c=651 fc=4110000 cc=670 chg=
<12>[90435.648578] (6)[853:[email protected]]healthd: battery l=59 v=3927 t=34.2 h=2
st=3 c=651 fc=4110000 cc=670 chg=
<12>[90435.651371] (6)[853:[email protected]]healthd: battery l=59 v=3927 t=34.2 h=2
st=3 c=651 fc=4110000 cc=670 chg=
<12>[90435.659859] (6)[853:[email protected]]healthd: battery l=59 v=3927 t=34.2 h=2
st=3 c=651 fc=4110000 cc=670 chg=
<12>[90435.659882] (6)[853:[email protected]]healthd: battery l=59 v=3927 t=34.2 h=2
st=3 c=651 fc=4110000 cc=670 chg=
<12>[90435.663935] (2)[853:[email protected]]healthd: battery l=59 v=3927 t=34.2 h=2
st=3 c=651 fc=4110000 cc=670 chg=
<4>[90435.721803] -(7)[4575:Binder:4028_9]CPU7: update max cpu_capacity 953
<6>[90435.876747] (5)[3825:[email protected]]i2c i2c-7:
error:addr=0x8,irq_stat=0x3,ch_offset=0x0,mask:0x12f
<6>[90435.876766] (5)[3825:[email protected]]i2c_dump_info: +++++++++++++++++++
<6>[90435.876783] (5)[3825:[email protected]]I2C structure:
<6>[90435.876783] [I2C]Clk=24960000,Id=7,Op=0x1,Irq_stat=0x3,Total_len=0x4
<6>[90435.876783] [I2C]Trans_len=0x4,Trans_num=0x1,Trans_auxlen=0x0,
<6>[90435.876783] [I2C]speed=400000,Trans_stop=1,cg_cnt=1,hs_only=0,
<6>[90435.876783] [I2C]ch_offset=0x0,ch_offset_default=0x0
<6>[90435.876803] (5)[3825:[email protected]]base addr:0x000000006b2b0d37
<6>[90435.876835] (5)[3825:[email protected]]I2C register:
<6>[90435.876835] [I2C]SLAVE_ADDR=0x10,INTR_MASK=0x0,INTR_STAT=0x0,
<6>[90435.876835] [I2C]CONTROL=0x28,TRANSFER_LEN=0x4,TRANSAC_LEN=0x1,
<6>[90435.876835] [I2C]DELAY_LEN=0xa,TIMING=0x405,LTIMING=0x23,START=0x0
<6>[90435.876835] [I2C]FIFO_STAT=0x0,IO_CONFIG=0x3,HS=0x0
<6>[90435.876835] [I2C]DCM_EN=0x0,DEBUGSTAT=0x700,EXT_CONF=0x1801
<6>[90435.876835] [I2C]TRANSFER_LEN_AUX=0x0,OFFSET_DMA_FSM_DEBUG=0x8700
<6>[90435.876835] [I2C]OFFSET_MCU_INTR=0x1
<6>[90435.876852] (5)[3825:[email protected]]before enable DMA
register(0xffffff800eda1600):
<6>[90435.876852] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90435.876852] [I2C]STOP=0x0,FLUSH=0x0,CON=0x1d,
<6>[90435.876852] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0xa798000
<6>[90435.876852] [I2C]TX_LEN=0x0,RX_LEN=0xb,INT_BUF_SIZE=0x0,
<6>[90435.876852] [I2C]DEBUGSTA=0xa0a0a00,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x2
<6>[90435.876871] (5)[3825:[email protected]]DMA register(0x0000000020f5953a):
<6>[90435.876871] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90435.876871] [I2C]STOP=0x0,FLUSH=0x0,CON=0x8,
<6>[90435.876871] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0x0,
<6>[90435.876871] [I2C]TX_LEN=0x0,RX_LEN=x0,INT_BUF_SIZE=0x0,
<6>[90435.876871] [I2C]DEBUGSTA=0x0,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x0
<6>[90435.876895] (5)[3825:[email protected]]i2c_dump_info: -----------------------
<6>[90435.876902] (5)[3825:[email protected]]i2c i2c-7: last transfer info:
<6>[90435.876909] (5)[3825:[email protected]]i2c i2c-7: [00] [90435.876737]
SLAVE_ADDR=10,INTR_STAT=3,CONTROL=28,FIFO_STAT=483,DEBUGSTAT=300, tmo=500
<6>[90435.876916] (5)[3825:[email protected]]i2c i2c-7: [01] [90052.931002]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=42,DEBUGSTAT=300, tmo=500
<6>[90435.876922] (5)[3825:[email protected]]i2c i2c-7: [02] [90052.930501]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90435.876929] (5)[3825:[email protected]]i2c i2c-7: [03] [90052.929993]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1ce0,DEBUGSTAT=700, tmo=500
<6>[90435.876935] (5)[3825:[email protected]]i2c i2c-7: [04] [90052.926307]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=21,DEBUGSTAT=300, tmo=500
<6>[90435.876942] (5)[3825:[email protected]]i2c i2c-7: [05] [90052.925911]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90435.876948] (5)[3825:[email protected]]i2c i2c-7: [06] [90052.925100]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1080,DEBUGSTAT=700, tmo=500
<6>[90435.876954] (5)[3825:[email protected]]i2c i2c-7: [07] [90050.343335]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=2c,FIFO_STAT=0,DEBUGSTAT=700, tmo=500
<6>[90435.876960] (5)[3825:[email protected]]i2c i2c-7: [08] [90050.342918]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90435.876966] (5)[3825:[email protected]]i2c i2c-7: [09] [90050.341827]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=21,DEBUGSTAT=300, tmo=500
<6>[90435.876971] (5)[3825:[email protected]]i2c i2c-7: i2c_gpio_dump_info +++++++++
++++++++++
<6>[90435.876981] (5)[3825:[email protected]]i2c i2c-7: I2C gpio structure:
<6>[90435.876981] [I2C]EH_CFG=0x3fffffff,PU_CFG=0x30007e1f,RSEL_CFG=0xffffff
<6>[90435.876987] (5)[3825:[email protected]]i2c i2c-7: addr:0x8,ACK error
<3>[90435.877013] (5)[3825:[email protected]]st21nfc_dev_write : i2c_master_send
returned -121
<4>[90435.882846] -(2)[5436:Binder:1454_17]alarmtimer_enqueue: 63 callbacks
suppressed
<5>[90435.882853] -(2)[5436:Binder:1454_17]alarmtimer_enqueue, 217847584000000
<5>[90435.900565] -(4)[3662:WifiScanningSer]alarmtimer_enqueue, 217847584000000
<5>[90435.916904] -(4)[3662:WifiScanningSer]alarmtimer_enqueue, 217847584000000
<5>[90435.919628] -(5)[8758:Binder:1454_1E]alarmtimer_enqueue, 217852330000000
<5>[90435.919714] -(5)[8758:Binder:1454_1E]alarmtimer_enqueue, 217852330000000
<6>[90435.940841] (7)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<14>[90435.955997] (6)[1:init]init: starting service 'mdnsd'...
<14>[90435.956345] (6)[1:init]init: Created socket '/dev/socket/mdnsd', mode 660,
user 1020, group 3003
<14>[90435.959305] (1)[1:init]init: Control message: Processed ctl.start for
'mdnsd' from pid: 837 (/system/bin/netd)
<6>[90436.021542] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90436.021603] (5)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90436.605718] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<5>[90436.701665] (1)[25366:kworker/1:4]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90436.701806] (1)[7386:kworker/1:0]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<3>[90436.703468] (1)[25366:kworker/1:4]ghr: scsi_execute exit ret = 0x0
<3>[90436.703494] (1)[7386:kworker/1:0]ghr: scsi_execute exit ret = 0x0
<6>[90436.865727] (2)[1367:AALMain]lm36273_brightness_set: bl level = 21, tmp_bl =
420, hbm level = 0
<6>[90436.942697] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90436.950974] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90436.951019] (2)[1038:mi_thermald][Power/PPM] Shrink 10 PPM logs from last
1546 ms!
<5>[90436.951024] (2)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90436.951044] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90436.951056] (2)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<36>[90437.026685] (0)[576:logd.auditd]type=1400 audit(1671083118.796:1623142):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<6>[90437.113584] (3)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90437.113660] (5)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<4>[90437.196862] -(4)[3662:WifiScanningSer]alarmtimer_enqueue: 2 callbacks
suppressed
<5>[90437.196872] -(4)[3662:WifiScanningSer]alarmtimer_enqueue, 217860518000000
<5>[90437.349398] -(3)[4901:Binder:1454_12]alarmtimer_enqueue, 217860518000000
<5>[90437.366120] -(1)[8758:Binder:1454_1E]alarmtimer_enqueue, 217860518000000
<5>[90437.397117] (2)[7405:kworker/u16:10][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(10)(3)(3) (15)(13)(1)(1)
<4>[90437.566152] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 934
<6>[90437.629836] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<36>[90437.935739] (0)[576:logd.auditd]type=1400 audit(1671083119.704:1623143):
avc: granted { execute } for comm="CombinedTP163"
path="/data/data/com.facebook.katana/lib-compressed/libloopermerged.so" dev="dm-13"
ino=14161 scontext=u:r:untrusted_app:s0:c237,c256,c512,c768
tcontext=u:object_r:app_data_file:s0:c237,c256,c512,c768 tclass=file
app=com.facebook.katana
<6>[90437.946631] (7)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90437.985562] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 1347868, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90437.985616] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90438.071731] (1)[1888:CachedAppOptimi]stop reclaim: force
<4>[90438.083992] -(7)[32372:Binder:30164_6]CPU7: update max cpu_capacity 701
<6>[90438.193544] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90438.193600] (7)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<4>[90438.314519] -(5)[0:swapper/5][name:bc&]tick broadcast enter counter cpu: 511,
517, 477, 483, 372, 373, 332, 384, success counter cpu: 74, 74, 67, 91, 44, 43, 50,
81, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 104, 124, 130,
145, 79, 58, 81, 121, o: 2-4,7, p: , f: , t: 90438444000000, 90438442658004,
90438472000000, 90438460000000, 90438506664389, 90438444000000, 90438444000000,
90438444000000,
<5>[90438.397080] (4)[23444:kworker/u16:7][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90438.401950] -(4)[7702:CombinedTP164]CPU4: update max cpu_capacity 826
<6>[90438.493740] (2)[296:hang_detect][Hang_Detect] hang_detect thread counts down
10:10, status 1.
<4>[90438.638428] -(7)[23444:kworker/u16:7]CPU7: update max cpu_capacity 934
<6>[90438.653632] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90438.949650] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90438.951153] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90438.951196] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90438.951231] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90438.951245] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90439.165838] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:00000000cad3e3e9 triggered!
<6>[90439.165933] (1)[559:lmkd]psi_trigger_poll: t:00000000cad3e3e9 triggered!
<6>[90439.273665] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90439.274248] (5)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90439.681692] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<5>[90439.768766] -(6)[1877:jobscheduler.bg]alarmtimer_enqueue, 217860518000000
<5>[90439.769018] -(6)[1877:jobscheduler.bg]alarmtimer_enqueue, 217860518000000
<6>[90439.954365] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90440.025787] -(7)[8:rcu_preempt]CPU7: update max cpu_capacity 953
<5>[90440.072312] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217860518000000
<5>[90440.073075] -(6)[1454:system_server]alarmtimer_enqueue, 217860518000000
<6>[90440.593043] (3)[1226:OverlayEngine_0]mtk_crtc_disp_mode_switch_begin no
delay from 0 to 1
<6>[90440.593082] (3)[1226:OverlayEngine_0]mtk_dsi_vdo_timing_change fps_chg_index
= 1
<6>[90440.593127] (3)[1226:OverlayEngine_0][fps]:
drm_invoke_fps_chg_callbacks,new_fps =50
<6>[90440.701773] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<5>[90440.797897] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90440.829019] (2)[1888:CachedAppOptimi][c:CachedAppOptimi 1888,
r:droid.ugc.trill 4935] adj adjust 905 100
<5>[90440.951448] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90440.951519] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90440.951562] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90440.951598] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90440.953640] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90440.959007] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90441.054237] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:9%
<6>[90441.054300] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90441.054321] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90441.054331] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90441.054345] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90441.054353] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90441.054367] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33813,33867562,5519), tx=(13558,2338,11220), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90441.054443] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<4>[90441.231185] -(7)[1543:gsm0710muxd]CPU7: update max cpu_capacity 934
<5>[90441.335594] -(0)[30622:bt_hci_thread]alarmtimer_enqueue, 217857284000000
<5>[90441.336893] -(0)[30623:HwBinder:30518_]alarmtimer_enqueue, 218166885000000
<5>[90441.338047] -(0)[30622:bt_hci_thread]alarmtimer_enqueue, 217857287000000
<5>[90441.339314] -(5)[30623:HwBinder:30518_]alarmtimer_enqueue, 218166885000000
<5>[90441.340570] -(1)[30622:bt_hci_thread]alarmtimer_enqueue, 217857289000000
<6>[90441.472396] (5)[845:[email protected]][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90441.472428] (5)[845:[email protected]][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x00000000], desc[BLE_SCAN]
<6>[90441.533378] (3)[845:[email protected]][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90441.533423] (3)[845:[email protected]][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x19991999], desc[BLE_SCAN]
<6>[90441.536998] (4)[845:[email protected]][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90441.537032] (4)[845:[email protected]][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x00000000], desc[BLE_SCAN]
<6>[90441.543995] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90441.544009] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x04900124], desc[BLE_SCAN]
<6>[90441.726019] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<5>[90441.835181] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(4)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90441.849196] -(7)[1957:presentFence]CPU7: update max cpu_capacity 631
<4>[90441.849655] -(6)[30505:kworker/6:1]CPU6: update max cpu_capacity 826
<5>[90441.877670] (1)[7386:kworker/1:0]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90441.879608] (1)[7386:kworker/1:0]ghr: scsi_execute exit ret = 0x0
<6>[90441.879672] (1)[7386:kworker/1:0]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90441.879691] (1)[7386:kworker/1:0]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90441.880043] (1)[7386:kworker/1:0]ufshcd bootdevice: rs,ret 0,363 us
<6>[90441.965906] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90442.291289] (0)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90442.291,L:16 L:16 map:16
<6>[90442.314399] (0)[1367:AALMain]lm36273_brightness_set: bl level = 11, tmp_bl =
220, hbm level = 0
<6>[90442.749798] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90442.846337] (6)[0:swapper/6][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<5>[90442.952003] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90442.952101] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<6>[90442.978087] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90443.253937] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 56, r13 = 0xc400fdbc, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem not sleep, subsys not sleep r12 =
0x10000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6163f3, req_sta =
0x15c3d0ff 0x180000 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0,
raw_ext_sta = 0x785255, wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102
0xc30102, req = 0x1a, clk_settle = 0x60fe,
<6>[90443.254029] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<4>[90443.315647] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 922,
878, 526, 725, 801, 626, 534, 297, success counter cpu: 140, 120, 87, 102, 64, 33,
39, 20, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 296, 234,
137, 201, 135, 80, 100, 45, o: 1-7, p: , f: , t: 90443508000000, 90443452399158,
90443476000000, 90443442483310, 90443596152465, 90443464540003, 90443740000000,
90443708000000,
<5>[90443.402410] (0)[7383:kworker/u16:6][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90443.614459] (4)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90443.615887] -(3)[7539:kworker/u17:0][ccci1/fsm]received MD status response
97630043
<6>[90443.616143] (0)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<6>[90443.646885] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x10,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443646868944,15000000]
<6>[90443.646922] (4)[435:wdtk-4][thread:435][RT:90443646912637] 2022-12-15
05:45:25.420586 UTC;android time 2022-12-15 12:45:25.420586
<6>[90443.677814] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x14,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443677787637,14969082]
<6>[90443.729632] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0x1c,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443729606791,14917263]
<6>[90443.729711] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x1d,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443729691329,14917178]
<6>[90443.731835] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0x5d,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443731823637,14915046]
<6>[90443.731928] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x5f,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443731879944,14914989]
<6>[90443.731973] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xdf,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443731965791,14914903]
<6>[90443.732056] (5)[436:wdtk-5][wdk-k]
cpu=5,lbit=0xff,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90443732040868,14914828]
<6>[90443.775884] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90443.987340] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90444.374665] -(1)[4601:Binder:1454_E]alarmtimer_enqueue: 35 callbacks
suppressed
<5>[90444.374679] -(1)[4601:Binder:1454_E]alarmtimer_enqueue, 217860518000000
<6>[90444.404165] (6)[1656:watchdog]AEEIOCTL_RT_MON_Kick ( 300)
<6>[90444.404195] (6)[1656:watchdog][Hang_Detect] hang_detect enabled 10
<6>[90444.797943] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<4>[90444.894264] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90444.894309] -(4)[7032:kworker/4:0]active wake lock :
disp_crtc0_wakelock,last_time:90435429
<4>[90444.894355] -(4)[7032:kworker/4:0]active wake lock :
(null),last_time:90435432
<5>[90444.952327] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90444.952416] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90444.952467] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90444.952509] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90444.997786] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90445.068738] (3)[2356:kworker/3:5]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90445.068800] (3)[2356:kworker/3:5]ufshcd bootdevice: rr,ret 0,1919 us
<5>[90445.351895] (0)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(12)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90445.353687] -(6)[1695:Binder:930_3]CPU6: update max cpu_capacity 476
<5>[90445.372040] (0)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(1)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<36>[90445.377000] (0)[576:logd.auditd]type=1400 audit(1671083127.144:1623144):
avc: denied { search } for comm="MiuiKeyguardPic" name="mcd" dev="dm-13" ino=340
scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:mcd_data_file:s0
tclass=dir permissive=0 app=com.miui.miwallpaper
<4>[90445.395164] -(7)[930:surfaceflinger]CPU7: update max cpu_capacity 631
<3>[90445.396464] (2)[936:HwBinder:851_2][ION][ion_dbg] alloc_pages order=4
cache=0
<5>[90445.401125] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90445.401489] (0)[7416:kworker/0:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90445.402656] -(4)[1695:Binder:930_3]CPU4: update max cpu_capacity 826
<5>[90445.404603] (0)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90445.412473] -(4)[1048:RenderEngine]CPU4: update max cpu_capacity 476
<3>[90445.430310] (3)[936:HwBinder:851_2][ION][ion_dbg] alloc_pages order=4
cache=0
<4>[90445.435765] -(7)[1957:presentFence]CPU7: update max cpu_capacity 631
<4>[90445.517605] -(4)[4518:Binder:4028_8]CPU4: update max cpu_capacity 826
<6>[90445.518183] (3)[2356:kworker/3:5]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90442.310,L:12 L:12 map:12 T:90445.518,L:0 L:0 map:0
<6>[90445.518649] (3)[2356:kworker/3:5]lm36273_brightness_set: bl level = 0,
tmp_bl = 0, hbm level = 0
<6>[90445.518960] (3)[2356:kworker/3:5]lm36273_brightness_set: close
<3>[90445.520557] (3)[857:[email protected]][mtk_nanohub]sensor_id id 26,
sensor_type:27
<36>[90445.522750] (0)[576:logd.auditd]type=1400 audit(1671083127.292:1623145):
avc: denied { read } for comm="Binder:636_3" name="wakeup38" dev="sysfs" ino=53173
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90445.523846] (3)[576:logd.auditd]type=1400 audit(1671083127.292:1623146):
avc: denied { read } for comm="Binder:636_3" name="wakeup28" dev="sysfs" ino=49384
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90445.525949] (3)[576:logd.auditd]type=1400 audit(1671083127.292:1623147):
avc: denied { read } for comm="Binder:636_3" name="wakeup18" dev="sysfs" ino=45075
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90445.526185] (3)[576:logd.auditd]type=1400 audit(1671083127.296:1623148):
avc: denied { read } for comm="Binder:636_3" name="wakeup26" dev="sysfs" ino=49169
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90445.526889] (3)[576:logd.auditd]type=1400 audit(1671083127.296:1623149):
avc: denied { read } for comm="Binder:636_3" name="wakeup16" dev="sysfs" ino=45045
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<3>[90445.527101] (3)[857:[email protected]][mtk_nanohub]sensor_id id 83,
sensor_type:84
<4>[90445.527782] (1)[7478:Binder:636_3]audit: audit_lost=1445319
audit_rate_limit=5 audit_backlog_limit=64
<3>[90445.527797] (1)[7478:Binder:636_3]audit: rate limit exceeded
<36>[90445.529459] (3)[576:logd.auditd]type=1400 audit(1671083127.296:1623150):
avc: denied { read } for comm="Binder:636_3" name="wakeup44" dev="sysfs" ino=54241
scontext=u:r:system_suspend:s0 tcontext=u:object_r:vendor_sysfs_fp:s0 tclass=dir
permissive=0
<36>[90445.529710] (3)[576:logd.auditd]type=1400 audit(1671083127.296:1623151):
avc: denied { read } for comm="Binder:636_3" name="wakeup34" dev="sysfs" ino=52827
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_usb_supply:s0 tclass=dir
permissive=0
<3>[90445.530000] (3)[857:[email protected]][mtk_nanohub]sensor_id id 81,
sensor_type:82
<12>[90445.530266] (4)[853:[email protected]]healthd: battery l=59 v=3916 t=34.2 h=2
st=3 c=307 fc=4110000 cc=670 chg=
<3>[90445.536504] (3)[857:[email protected]][mtk_nanohub]sensor_id id 81,
sensor_type:82
<4>[90445.541991] -(4)[1033:Binder:930_1]CPU4: update max cpu_capacity 476
<6>[90445.543451] (0)[977:HwBinder:852_1]mtk_crtc_disp_mode_switch_begin no delay
from 1 to 0
<6>[90445.543542] (0)[977:HwBinder:852_1]mtk_dsi_vdo_timing_change fps_chg_index =
1
<6>[90445.543662] (0)[977:HwBinder:852_1][fps]:
drm_invoke_fps_chg_callbacks,new_fps =60
<6>[90445.543819] (0)[977:HwBinder:852_1]lyeblob lost ID:0
<6>[90445.544672] (0)[977:HwBinder:852_1]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<6>[90445.544703] (0)[977:HwBinder:852_1]mtk_output_dsi_disable +, new_doze_state
= 0, dsi->doze_enabled = 0, output = 1
<6>[90445.544720] (0)[977:HwBinder:852_1]mtk_drm_crtc_wait_blank wait TUI finish
<6>[90445.544736] (0)[977:HwBinder:852_1]mtk_drm_crtc_wait_blank TUI done state=0
<6>[90445.544753] (0)[977:HwBinder:852_1][NVT-ts-spi] nvt_drm_notifier_callback
2997: event=2, *blank=5
<6>[90445.544781] (0)[977:HwBinder:852_1][NVT-ts-spi] nvt_irq_enable 169:
enable=0, desc->depth=1
<6>[90445.544795] (0)[977:HwBinder:852_1][NVT-ts-spi] nvt_ts_suspend 2807: cancel
delayed work sync
<6>[90445.544813] (0)[977:HwBinder:852_1][NVT-ts-spi] nvt_ts_suspend 2814: start
<6>[90445.544827] (0)[977:HwBinder:852_1][NVT-ts-spi] nvt_ts_suspend 2820: palm
sensor on status, switch to off
<6>[90445.544843] (0)[977:HwBinder:852_1][NVT-ts-spi] nvt_set_pocket_palm_switch
580: set pocket palm switch: 0
<4>[90445.546460] -(7)[1262:TimerDispatch]CPU7: update max cpu_capacity 631
<5>[90445.582075] -(7)[30622:bt_hci_thread]alarmtimer_enqueue, 217861531000000
<5>[90445.586623] -(7)[30623:HwBinder:30518_]alarmtimer_enqueue, 218166885000000
<5>[90445.587592] -(6)[30622:bt_hci_thread]alarmtimer_enqueue, 217861536000000
<5>[90445.589311] -(0)[30623:HwBinder:30518_]alarmtimer_enqueue, 218166885000000
<6>[90445.589406] (1)[977:HwBinder:852_1][NVT-ts-spi] nvt_set_pocket_palm_switch
611: nvt_set_pocket_palm_switch --
<6>[90445.589985] (0)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90445.590010] (0)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x00000000], desc[BLE_SCAN]
<5>[90445.591149] -(7)[30622:bt_hci_thread]alarmtimer_enqueue, 217861540000000
<12>[90445.608733] (1)[853:[email protected]]healthd: battery l=59 v=3916 t=34.2 h=2
st=3 c=307 fc=4110000 cc=670 chg=
<12>[90445.608810] (1)[853:[email protected]]healthd: battery l=59 v=3916 t=34.2 h=2
st=3 c=307 fc=4110000 cc=670 chg=
<12>[90445.622924] (4)[853:[email protected]]healthd: battery l=59 v=3916 t=34.2 h=2
st=3 c=307 fc=4110000 cc=670 chg=
<6>[90445.678748] (2)[977:HwBinder:852_1][NVT-ts-spi] nvt_ts_suspend 2878: end
<6>[90445.692960] (2)[977:HwBinder:852_1]lcm_unprepare
<6>[90445.692996] (2)[977:HwBinder:852_1]push_table 0: 1
<6>[90445.693021] (2)[977:HwBinder:852_1]push_table 1: 1
<6>[90445.693046] -(1)[4601:Binder:1454_E]push_table 2: 1
<6>[90445.693085] -(1)[4601:Binder:1454_E][ESD]_esd_check_ext_te_irq_handler is
comming, but ignore
<6>[90445.709653] (3)[2356:kworker/3:5]push_table 4: 1
<6>[90445.735331] -(0)[249:chre_kthread][bq27z561] fg_update_status:
SOC:59,Volt:3916,Cur:307,Temp:342,RM:2233,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90445.742737] -(0)[249:chre_kthread][hf_manager][android.hardwar][857:933]
buffer full 1 217850954844019
<6>[90445.822067] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90445.837788] (0)[977:HwBinder:852_1]lm36273_bias_enable enable = 0
<6>[90445.838016] (0)[977:HwBinder:852_1]i2c i2c-6:
error:addr=0x11,irq_stat=0x3,ch_offset=0x0,mask:0x12f
<6>[90445.838040] (0)[977:HwBinder:852_1]i2c_dump_info: +++++++++++++++++++
<6>[90445.838069] (0)[977:HwBinder:852_1]I2C structure:
<6>[90445.838069] [I2C]Clk=24960000,Id=6,Op=0x1,Irq_stat=0x3,Total_len=0x2
<6>[90445.838069] [I2C]Trans_len=0x2,Trans_num=0x1,Trans_auxlen=0x0,
<6>[90445.838069] [I2C]speed=400000,Trans_stop=1,cg_cnt=1,hs_only=0,
<6>[90445.838069] [I2C]ch_offset=0x0,ch_offset_default=0x0
<6>[90445.838105] (0)[977:HwBinder:852_1]base addr:0x0000000054d2303d
<6>[90445.838153] (0)[977:HwBinder:852_1]I2C register:
<6>[90445.838153] [I2C]SLAVE_ADDR=0x22,INTR_MASK=0x0,INTR_STAT=0x0,
<6>[90445.838153] [I2C]CONTROL=0x28,TRANSFER_LEN=0x2,TRANSAC_LEN=0x1,
<6>[90445.838153] [I2C]DELAY_LEN=0xa,TIMING=0x405,LTIMING=0x23,START=0x0
<6>[90445.838153] [I2C]FIFO_STAT=0x0,IO_CONFIG=0x3,HS=0x8000
<6>[90445.838153] [I2C]DCM_EN=0x0,DEBUGSTAT=0x700,EXT_CONF=0x1801
<6>[90445.838153] [I2C]TRANSFER_LEN_AUX=0x0,OFFSET_DMA_FSM_DEBUG=0x600
<6>[90445.838153] [I2C]OFFSET_MCU_INTR=0x3
<6>[90445.838283] (0)[977:HwBinder:852_1]before enable DMA
register(0xffffff800ed65580):
<6>[90445.838283] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90445.838283] [I2C]STOP=0x0,FLUSH=0x0,CON=0xc,
<6>[90445.838283] [I2C]TX_MEM_ADDR=0xa790000, RX_MEM_ADDR=0x0
<6>[90445.838283] [I2C]TX_LEN=0x3c,RX_LEN=0x0,INT_BUF_SIZE=0x0,
<6>[90445.838283] [I2C]DEBUGSTA=0x1c1c1c00,TX_MEM_ADDR2=0x2, RX_MEM_ADDR2=0x0
<6>[90445.838340] (0)[977:HwBinder:852_1]DMA register(0x00000000a7f17087):
<6>[90445.838340] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90445.838340] [I2C]STOP=0x0,FLUSH=0x0,CON=0x8,
<6>[90445.838340] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0x0,
<6>[90445.838340] [I2C]TX_LEN=0x0,RX_LEN=x0,INT_BUF_SIZE=0x0,
<6>[90445.838340] [I2C]DEBUGSTA=0x0,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x0
<6>[90445.838376] (0)[977:HwBinder:852_1]i2c_dump_info: -----------------------
<6>[90445.838396] (0)[977:HwBinder:852_1]i2c i2c-6: last transfer info:
<6>[90445.838422] (0)[977:HwBinder:852_1]i2c i2c-6: [00] [90445.837997]
SLAVE_ADDR=22,INTR_STAT=3,CONTROL=28,FIFO_STAT=121,DEBUGSTAT=300, tmo=500
<6>[90445.838448] (0)[977:HwBinder:852_1]i2c i2c-6: [01] [90445.518944]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838474] (0)[977:HwBinder:852_1]i2c i2c-6: [02] [90445.518623]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838499] (0)[977:HwBinder:852_1]i2c i2c-6: [03] [90445.518434]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838524] (0)[977:HwBinder:852_1]i2c i2c-6: [04] [90442.314373]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838550] (0)[977:HwBinder:852_1]i2c i2c-6: [05] [90442.314149]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838576] (0)[977:HwBinder:852_1]i2c i2c-6: [06] [90436.865704]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=499
<6>[90445.838601] (0)[977:HwBinder:852_1]i2c i2c-6: [07] [90436.865308]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838627] (0)[977:HwBinder:852_1]i2c i2c-6: [08] [90435.512622]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838652] (0)[977:HwBinder:852_1]i2c i2c-6: [09] [90435.512479]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.838672] (0)[977:HwBinder:852_1]i2c i2c-6: i2c_gpio_dump_info +++++++++++
++++++++
<6>[90445.838698] (0)[977:HwBinder:852_1]i2c i2c-6: I2C gpio structure:
<6>[90445.838698] [I2C]EH_CFG=0x38e3f,PU_CFG=0xd836000,RSEL_CFG=0xffa
<6>[90445.838722] (0)[977:HwBinder:852_1]i2c i2c-6: addr:0x11,ACK error
<6>[90445.838765] (0)[977:HwBinder:852_1]lm36273 write data fail !!
<6>[90445.842086] (0)[977:HwBinder:852_1]i2c i2c-6:
error:addr=0x11,irq_stat=0x3,ch_offset=0x0,mask:0x12f
<6>[90445.842109] (0)[977:HwBinder:852_1]i2c_dump_info: +++++++++++++++++++
<6>[90445.842136] (0)[977:HwBinder:852_1]I2C structure:
<6>[90445.842136] [I2C]Clk=24960000,Id=6,Op=0x1,Irq_stat=0x3,Total_len=0x2
<6>[90445.842136] [I2C]Trans_len=0x2,Trans_num=0x1,Trans_auxlen=0x0,
<6>[90445.842136] [I2C]speed=400000,Trans_stop=1,cg_cnt=1,hs_only=0,
<6>[90445.842136] [I2C]ch_offset=0x0,ch_offset_default=0x0
<6>[90445.842171] (0)[977:HwBinder:852_1]base addr:0x0000000054d2303d
<6>[90445.842218] (0)[977:HwBinder:852_1]I2C register:
<6>[90445.842218] [I2C]SLAVE_ADDR=0x22,INTR_MASK=0x0,INTR_STAT=0x0,
<6>[90445.842218] [I2C]CONTROL=0x28,TRANSFER_LEN=0x2,TRANSAC_LEN=0x1,
<6>[90445.842218] [I2C]DELAY_LEN=0xa,TIMING=0x405,LTIMING=0x23,START=0x0
<6>[90445.842218] [I2C]FIFO_STAT=0x0,IO_CONFIG=0x3,HS=0x8000
<6>[90445.842218] [I2C]DCM_EN=0x0,DEBUGSTAT=0x700,EXT_CONF=0x1801
<6>[90445.842218] [I2C]TRANSFER_LEN_AUX=0x0,OFFSET_DMA_FSM_DEBUG=0x600
<6>[90445.842218] [I2C]OFFSET_MCU_INTR=0x3
<6>[90445.842274] (0)[977:HwBinder:852_1]before enable DMA
register(0xffffff800ed65580):
<6>[90445.842274] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90445.842274] [I2C]STOP=0x0,FLUSH=0x0,CON=0xc,
<6>[90445.842274] [I2C]TX_MEM_ADDR=0xa790000, RX_MEM_ADDR=0x0
<6>[90445.842274] [I2C]TX_LEN=0x3c,RX_LEN=0x0,INT_BUF_SIZE=0x0,
<6>[90445.842274] [I2C]DEBUGSTA=0x1c1c1c00,TX_MEM_ADDR2=0x2, RX_MEM_ADDR2=0x0
<6>[90445.842327] (0)[977:HwBinder:852_1]DMA register(0x00000000a7f17087):
<6>[90445.842327] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90445.842327] [I2C]STOP=0x0,FLUSH=0x0,CON=0x8,
<6>[90445.842327] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0x0,
<6>[90445.842327] [I2C]TX_LEN=0x0,RX_LEN=x0,INT_BUF_SIZE=0x0,
<6>[90445.842327] [I2C]DEBUGSTA=0x0,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x0
<6>[90445.842362] (0)[977:HwBinder:852_1]i2c_dump_info: -----------------------
<6>[90445.842381] (0)[977:HwBinder:852_1]i2c i2c-6: last transfer info:
<6>[90445.842406] (0)[977:HwBinder:852_1]i2c i2c-6: [00] [90445.842073]
SLAVE_ADDR=22,INTR_STAT=3,CONTROL=28,FIFO_STAT=121,DEBUGSTAT=300, tmo=500
<6>[90445.842432] (0)[977:HwBinder:852_1]i2c i2c-6: [01] [90445.837997]
SLAVE_ADDR=22,INTR_STAT=3,CONTROL=28,FIFO_STAT=121,DEBUGSTAT=300, tmo=500
<6>[90445.842457] (0)[977:HwBinder:852_1]i2c i2c-6: [02] [90445.518944]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.842483] (0)[977:HwBinder:852_1]i2c i2c-6: [03] [90445.518623]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.842508] (0)[977:HwBinder:852_1]i2c i2c-6: [04] [90445.518434]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.842533] (0)[977:HwBinder:852_1]i2c i2c-6: [05] [90442.314373]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.842557] (0)[977:HwBinder:852_1]i2c i2c-6: [06] [90442.314149]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.842582] (0)[977:HwBinder:852_1]i2c i2c-6: [07] [90436.865704]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=499
<6>[90445.842607] (0)[977:HwBinder:852_1]i2c i2c-6: [08] [90436.865308]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.842632] (0)[977:HwBinder:852_1]i2c i2c-6: [09] [90435.512622]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.842651] (0)[977:HwBinder:852_1]i2c i2c-6: i2c_gpio_dump_info +++++++++++
++++++++
<6>[90445.842675] (0)[977:HwBinder:852_1]i2c i2c-6: I2C gpio structure:
<6>[90445.842675] [I2C]EH_CFG=0x38e3f,PU_CFG=0xd836000,RSEL_CFG=0xffa
<6>[90445.842698] (0)[977:HwBinder:852_1]i2c i2c-6: addr:0x11,ACK error
<6>[90445.842738] (0)[977:HwBinder:852_1]lm36273 write data fail !!
<6>[90445.842920] (0)[977:HwBinder:852_1]i2c i2c-6:
error:addr=0x11,irq_stat=0x3,ch_offset=0x0,mask:0x12f
<6>[90445.842942] (0)[977:HwBinder:852_1]i2c_dump_info: +++++++++++++++++++
<6>[90445.842969] (0)[977:HwBinder:852_1]I2C structure:
<6>[90445.842969] [I2C]Clk=24960000,Id=6,Op=0x1,Irq_stat=0x3,Total_len=0x2
<6>[90445.842969] [I2C]Trans_len=0x2,Trans_num=0x1,Trans_auxlen=0x0,
<6>[90445.842969] [I2C]speed=400000,Trans_stop=1,cg_cnt=1,hs_only=0,
<6>[90445.842969] [I2C]ch_offset=0x0,ch_offset_default=0x0
<6>[90445.843002] (0)[977:HwBinder:852_1]base addr:0x0000000054d2303d
<6>[90445.843047] (0)[977:HwBinder:852_1]I2C register:
<6>[90445.843047] [I2C]SLAVE_ADDR=0x22,INTR_MASK=0x0,INTR_STAT=0x0,
<6>[90445.843047] [I2C]CONTROL=0x28,TRANSFER_LEN=0x2,TRANSAC_LEN=0x1,
<6>[90445.843047] [I2C]DELAY_LEN=0xa,TIMING=0x405,LTIMING=0x23,START=0x0
<6>[90445.843047] [I2C]FIFO_STAT=0x0,IO_CONFIG=0x3,HS=0x8000
<6>[90445.843047] [I2C]DCM_EN=0x0,DEBUGSTAT=0x700,EXT_CONF=0x1801
<6>[90445.843047] [I2C]TRANSFER_LEN_AUX=0x0,OFFSET_DMA_FSM_DEBUG=0x600
<6>[90445.843047] [I2C]OFFSET_MCU_INTR=0x3
<6>[90445.843103] (0)[977:HwBinder:852_1]before enable DMA
register(0xffffff800ed65580):
<6>[90445.843103] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90445.843103] [I2C]STOP=0x0,FLUSH=0x0,CON=0xc,
<6>[90445.843103] [I2C]TX_MEM_ADDR=0xa790000, RX_MEM_ADDR=0x0
<6>[90445.843103] [I2C]TX_LEN=0x3c,RX_LEN=0x0,INT_BUF_SIZE=0x0,
<6>[90445.843103] [I2C]DEBUGSTA=0x1c1c1c00,TX_MEM_ADDR2=0x2, RX_MEM_ADDR2=0x0
<6>[90445.843169] (0)[977:HwBinder:852_1]DMA register(0x00000000a7f17087):
<6>[90445.843169] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90445.843169] [I2C]STOP=0x0,FLUSH=0x0,CON=0x8,
<6>[90445.843169] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0x0,
<6>[90445.843169] [I2C]TX_LEN=0x0,RX_LEN=x0,INT_BUF_SIZE=0x0,
<6>[90445.843169] [I2C]DEBUGSTA=0x0,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x0
<6>[90445.843204] (0)[977:HwBinder:852_1]i2c_dump_info: -----------------------
<6>[90445.843223] (0)[977:HwBinder:852_1]i2c i2c-6: last transfer info:
<6>[90445.843248] (0)[977:HwBinder:852_1]i2c i2c-6: [00] [90445.842909]
SLAVE_ADDR=22,INTR_STAT=3,CONTROL=28,FIFO_STAT=121,DEBUGSTAT=300, tmo=500
<6>[90445.843274] (0)[977:HwBinder:852_1]i2c i2c-6: [01] [90445.842073]
SLAVE_ADDR=22,INTR_STAT=3,CONTROL=28,FIFO_STAT=121,DEBUGSTAT=300, tmo=500
<6>[90445.843300] (0)[977:HwBinder:852_1]i2c i2c-6: [02] [90445.837997]
SLAVE_ADDR=22,INTR_STAT=3,CONTROL=28,FIFO_STAT=121,DEBUGSTAT=300, tmo=500
<6>[90445.843326] (0)[977:HwBinder:852_1]i2c i2c-6: [03] [90445.518944]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.843352] (0)[977:HwBinder:852_1]i2c i2c-6: [04] [90445.518623]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.843377] (0)[977:HwBinder:852_1]i2c i2c-6: [05] [90445.518434]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.843402] (0)[977:HwBinder:852_1]i2c i2c-6: [06] [90442.314373]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.843427] (0)[977:HwBinder:852_1]i2c i2c-6: [07] [90442.314149]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.843452] (0)[977:HwBinder:852_1]i2c i2c-6: [08] [90436.865704]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=499
<6>[90445.843477] (0)[977:HwBinder:852_1]i2c i2c-6: [09] [90436.865308]
SLAVE_ADDR=22,INTR_STAT=1,CONTROL=28,FIFO_STAT=220,DEBUGSTAT=700, tmo=500
<6>[90445.843496] (0)[977:HwBinder:852_1]i2c i2c-6: i2c_gpio_dump_info +++++++++++
++++++++
<6>[90445.843521] (0)[977:HwBinder:852_1]i2c i2c-6: I2C gpio structure:
<6>[90445.843521] [I2C]EH_CFG=0x38e3f,PU_CFG=0xd836000,RSEL_CFG=0xffa
<6>[90445.843543] (0)[977:HwBinder:852_1]i2c i2c-6: addr:0x11,ACK error
<6>[90445.843582] (0)[977:HwBinder:852_1]lm36273 write data fail !!
<3>[90445.843599] (0)[977:HwBinder:852_1]lcm_panel_dvdd_disable +
<3>[90445.843624] (0)[977:HwBinder:852_1][wl2866d_masked_write] : Writing 0x00 to
0x000e with mask 0x02
<3>[90445.844237] (0)[977:HwBinder:852_1][wl2866d_regulator_disable] : [wl2866d-
dvdd2][1] regulator disabled
<3>[90445.844262] (0)[977:HwBinder:852_1]lcm_panel_dvdd_disable -
<3>[90445.849222] (0)[977:HwBinder:852_1]lcm_panel_vm18_disable +
<3>[90445.849287] (0)[977:HwBinder:852_1]lcm_panel_vm18_disable -
<6>[90445.849319] (0)[977:HwBinder:852_1]dsi_panel_state_count: on_times[467]
off_times[466]
<6>[90445.849347] (0)[977:HwBinder:852_1]hbm_times[0],en[0] off[1]
<6>[90445.849386] (0)[977:HwBinder:852_1]
[mi_disp:mi_dsi_panel_mi_cfg_state_update] [info]power state:5
<6>[90445.849479] (0)[977:HwBinder:852_1]mtk_dsi_poweroff: clk_refcnt = 2, skip
power off
<6>[90445.849503] (0)[977:HwBinder:852_1][info] fpc_fb_notif_callback value = 1
blank = 5
<6>[90445.849640] (0)[977:HwBinder:852_1][info] fpc_fb_notif_callback lcd off
notify
<6>[90445.849665] (0)[977:HwBinder:852_1]mtk_output_dsi_disable-
<6>[90445.849692] (0)[977:HwBinder:852_1]mtk_drm_crtc_wait_blank wait TUI finish
<6>[90445.849713] (0)[977:HwBinder:852_1]mtk_drm_crtc_wait_blank TUI done state=0
<6>[90445.849774] (0)[977:HwBinder:852_1]mtk_disp_esd_check_switch 0
<6>[90445.850825] (0)[977:HwBinder:852_1]mtk_dsi_poweroff: clk_refcnt = 1, skip
power off
<6>[90445.851832] (0)[977:HwBinder:852_1]CRTC0 release input fence
<6>[90445.852024] (0)[977:HwBinder:852_1]CRTC0 release wakelock
mtk_drm_crtc_suspend 5399
<6>[90445.852081] (0)[977:HwBinder:852_1]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<4>[90445.852342] (0)[977:HwBinder:852_1]thermal_sys:
screen_state_for_thermal_callback: FB_BLANK_POWERDOWN
<3>[90445.852512] (0)[977:HwBinder:852_1][ION]ion_fb_event: + screen-off +
<3>[90445.852528] (0)[977:HwBinder:852_1][ION]ion_fb_event: - screen-off -
<5>[90445.852538] (0)[977:HwBinder:852_1][Power/PPM] @ppm_lcmoff_switch: onoff = 0
<6>[90445.852548] (0)[977:HwBinder:852_1]#@# cm_mgr_fb_notifier_callback(588)
SCREEN OFF
<6>[90445.852592] (0)[977:HwBinder:852_1]@@@@@@@@@@ Conninfra enter early
POWERDOWN @@@@@@@@@@@@@@
<6>[90445.852744] (0)[977:HwBinder:852_1][btmtk_info] btmtk_fb_notifier_callback:
blank state [1]->[0], and send cmd
<6>[90445.852755] (0)[977:HwBinder:852_1][btmtk_info] [InternalCmd]
btmtk_intcmd_wmt_blank_status
<6>[90445.852946] (2)[1035:mi_thermald]conninfra@(opfunc_pre_cal_check:1004)
[opfunc_pre_cal_check] [pre_cal] bt=[1] wf=[1] status=[4]
<6>[90445.853003] (2)[1035:mi_thermald]charger_manager_set_prop_system_temp_level:
charger_online=0, temp_level=0
<6>[90445.857372] (0)[977:HwBinder:852_1][btmtk_info] btmtk_btif_send_and_recv,
ret = 499
<6>[90445.857391] (0)[977:HwBinder:852_1][btmtk_info] [InternalCmd]
btmtk_intcmd_wmt_blank_status done, result = WMT_EVT_SUCCESS
<6>[90445.918011] (2)[857:[email protected]][NVT-ts-spi] nvt_palm_sensor_write 1735:
enter 0 1
<6>[90445.918054] (2)[857:[email protected]]palm_sensor_store value:0
<4>[90446.005839] -(3)[3752:main_thread]asicConnac2xFillCmdTxdInfo: 6 callbacks
suppressed
<6>[90446.007915] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90446.134159] (2)[1683:SystemPressureC]update_trigger:psi_trigger_destroy,
old:000000009f05ad2e
<6>[90446.458036] (2)[3825:[email protected]]i2c i2c-7:
error:addr=0x8,irq_stat=0x3,ch_offset=0x0,mask:0x12f
<6>[90446.458081] (2)[3825:[email protected]]i2c_dump_info: +++++++++++++++++++
<6>[90446.458111] (2)[3825:[email protected]]I2C structure:
<6>[90446.458111] [I2C]Clk=24960000,Id=7,Op=0x1,Irq_stat=0x3,Total_len=0x4
<6>[90446.458111] [I2C]Trans_len=0x4,Trans_num=0x1,Trans_auxlen=0x0,
<6>[90446.458111] [I2C]speed=400000,Trans_stop=1,cg_cnt=1,hs_only=0,
<6>[90446.458111] [I2C]ch_offset=0x0,ch_offset_default=0x0
<6>[90446.458146] (2)[3825:[email protected]]base addr:0x000000006b2b0d37
<6>[90446.458195] (2)[3825:[email protected]]I2C register:
<6>[90446.458195] [I2C]SLAVE_ADDR=0x10,INTR_MASK=0x0,INTR_STAT=0x0,
<6>[90446.458195] [I2C]CONTROL=0x28,TRANSFER_LEN=0x4,TRANSAC_LEN=0x1,
<6>[90446.458195] [I2C]DELAY_LEN=0xa,TIMING=0x405,LTIMING=0x23,START=0x0
<6>[90446.458195] [I2C]FIFO_STAT=0x0,IO_CONFIG=0x3,HS=0x0
<6>[90446.458195] [I2C]DCM_EN=0x0,DEBUGSTAT=0x700,EXT_CONF=0x1801
<6>[90446.458195] [I2C]TRANSFER_LEN_AUX=0x0,OFFSET_DMA_FSM_DEBUG=0x8700
<6>[90446.458195] [I2C]OFFSET_MCU_INTR=0x1
<6>[90446.458253] (2)[3825:[email protected]]before enable DMA
register(0xffffff800eda1600):
<6>[90446.458253] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90446.458253] [I2C]STOP=0x0,FLUSH=0x0,CON=0x1d,
<6>[90446.458253] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0xa798000
<6>[90446.458253] [I2C]TX_LEN=0x0,RX_LEN=0xb,INT_BUF_SIZE=0x0,
<6>[90446.458253] [I2C]DEBUGSTA=0xa0a0a00,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x2
<6>[90446.458308] (2)[3825:[email protected]]DMA register(0x0000000020f5953a):
<6>[90446.458308] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90446.458308] [I2C]STOP=0x0,FLUSH=0x0,CON=0x8,
<6>[90446.458308] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0x0,
<6>[90446.458308] [I2C]TX_LEN=0x0,RX_LEN=x0,INT_BUF_SIZE=0x0,
<6>[90446.458308] [I2C]DEBUGSTA=0x0,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x0
<6>[90446.458344] (2)[3825:[email protected]]i2c_dump_info: -----------------------
<6>[90446.458364] (2)[3825:[email protected]]i2c i2c-7: last transfer info:
<6>[90446.458390] (2)[3825:[email protected]]i2c i2c-7: [00] [90446.458012]
SLAVE_ADDR=10,INTR_STAT=3,CONTROL=28,FIFO_STAT=483,DEBUGSTAT=300, tmo=500
<6>[90446.458416] (2)[3825:[email protected]]i2c i2c-7: [01] [90435.885696]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=42,DEBUGSTAT=300, tmo=499
<6>[90446.458442] (2)[3825:[email protected]]i2c i2c-7: [02] [90435.885439]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90446.458468] (2)[3825:[email protected]]i2c i2c-7: [03] [90435.885048]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1ce0,DEBUGSTAT=700, tmo=500
<6>[90446.458494] (2)[3825:[email protected]]i2c i2c-7: [04] [90435.883236]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=21,DEBUGSTAT=300, tmo=500
<6>[90446.458520] (2)[3825:[email protected]]i2c i2c-7: [05] [90435.883078]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90446.458546] (2)[3825:[email protected]]i2c i2c-7: [06] [90435.881478]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1080,DEBUGSTAT=700, tmo=500
<6>[90446.458572] (2)[3825:[email protected]]i2c i2c-7: [07] [90435.876737]
SLAVE_ADDR=10,INTR_STAT=3,CONTROL=28,FIFO_STAT=483,DEBUGSTAT=300, tmo=500
<6>[90446.458598] (2)[3825:[email protected]]i2c i2c-7: [08] [90052.931002]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=42,DEBUGSTAT=300, tmo=500
<6>[90446.458623] (2)[3825:[email protected]]i2c i2c-7: [09] [90052.930501]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90446.458642] (2)[3825:[email protected]]i2c i2c-7: i2c_gpio_dump_info +++++++++
++++++++++
<6>[90446.458667] (2)[3825:[email protected]]i2c i2c-7: I2C gpio structure:
<6>[90446.458667] [I2C]EH_CFG=0x3fffffff,PU_CFG=0x30007e1f,RSEL_CFG=0xffffff
<6>[90446.458691] (2)[3825:[email protected]]i2c i2c-7: addr:0x8,ACK error
<3>[90446.458785] (2)[3825:[email protected]]st21nfc_dev_write : i2c_master_send
returned -121
<6>[90446.721399] (4)[7727:i.msa.global:u]binder: 7727:7727 ioctl 40046210
7fcfc60304 returned -22
<4>[90446.767396] -(5)[4944:Binder:1454_13]alarmtimer_enqueue: 8 callbacks
suppressed
<5>[90446.767405] -(5)[4944:Binder:1454_13]alarmtimer_enqueue, 217860518000000
<6>[90446.845800] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<5>[90446.880462] (5)[27694:kworker/u17:1][Power/PPM] Shrink 10 PPM logs from last
1528 ms!
<5>[90446.880487] (5)[27694:kworker/u17:1][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90446.952735] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90446.952823] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90446.952874] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90446.952916] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90446.955680] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90447.015711] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90447.381906] -(4)[7032:kworker/4:0]CPU4: update max cpu_capacity 864
<6>[90447.870856] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90448.024805] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90448.318490] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 696,
654, 659, 685, 400, 310, 335, 172, success counter cpu: 152, 117, 93, 146, 63, 38,
32, 18, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 270, 207,
188, 280, 118, 62, 67, 24, o: 0-1,3-7, p: , f: 2, t: 90448496000000,
90448508000000, 90448444000000, 90448460794928, 90448680669894, 90448668000000,
9223372036854775807, 90448668000000,
<6>[90448.673675] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 193, r13 = 0x84000880, debug_flag = 0xf80403ff
0x4001e00e, connectivity sleep, modem sleep, subsys sleep r12 = 0x10000, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24563fb, req_sta = 0x1c00000 0x180000
0x50000017 0x1e0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a56,
wake_misc = 0x390000, pcm_flag = 0xc38702 0x0 0xc38302 0xc38302, req = 0x0,
clk_settle = 0x60fe,
<6>[90448.673819] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<5>[90448.798039] (3)[2356:kworker/3:5]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90448.800287] (3)[2356:kworker/3:5]ghr: scsi_execute exit ret = 0x0
<6>[90448.800433] (3)[2356:kworker/3:5]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90448.800454] (3)[2356:kworker/3:5]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90448.800868] (3)[2356:kworker/3:5]ufshcd bootdevice: rs,ret 0,507 us
<6>[90448.893832] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<5>[90448.954728] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90448.954811] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90448.954860] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90448.954902] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90449.034491] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90449.245823] (1)[0:swapper/1][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90449.917748] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<5>[90450.020819] -(0)[0:swapper/0]lvts_paused = 1
<6>[90450.042843] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90450.942872] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<5>[90450.955130] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90450.955205] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90450.955258] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90450.955300] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90451.038671] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90451.052436] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90451.297409] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:7%, syspll:0%, bus26m:20%
<6>[90451.297543] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90451.297565] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90451.297575] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90451.297588] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90451.297596] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90451.297609] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33813,33867562,5519), tx=(13562,2342,11220), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90451.297686] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90451.965974] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90452.062642] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90452.530983] -(0)[0:swapper/0]lvts_paused = 1
<5>[90452.572639] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217885062000000
<5>[90452.574099] -(1)[1454:system_server]alarmtimer_enqueue, 217885062000000
<5>[90452.955542] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90452.955645] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90452.955698] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90452.955740] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90452.957743] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90452.989868] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90453.070899] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90453.321186] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 493,
411, 437, 346, 151, 47, 67, 20, success counter cpu: 126, 93, 90, 62, 18, 1, 1, 1,
fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 262, 198, 198,
161, 59, 9, 17, 5, o: 1-7, p: , f: 0, t: 90453446689697, 90453481139850,
90453446948389, 90453515760696, 90453687104971, 90453596000000, 90453756000000,
90453724000000,
<6>[90453.854559] (0)[0:swapper/0][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90453.918769] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 54, r13 = 0xc40019ac, debug_flag = 0xf8040000
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b61e3fb, req_sta = 0x1c000ff
0x0 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38702 0x0 0xc38302 0xc38302, req = 0x0,
clk_settle = 0x60fe,
<6>[90453.918970] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90454.013974] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90454.079216] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90454.887601] (3)[2356:kworker/3:5]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90454.887664] (3)[2356:kworker/3:5]ufshcd bootdevice: rr,ret 0,2010 us
<5>[90454.955964] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90454.956056] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90454.956107] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90454.956148] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90455.033586] -(2)[0:swapper/2]lvts_paused = 1
<6>[90455.038038] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90455.089330] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90455.458906] -(1)[0:swapper/1]lvts_paused = 1
<5>[90455.458987] -(1)[0:swapper/1]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<4>[90455.647008] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90455.647082] -(4)[7032:kworker/4:0]active wake lock :
sync_time,last_time:90455773
<5>[90455.971265] -(3)[0:swapper/3]lvts_paused = 1
<5>[90455.971359] -(3)[0:swapper/3]Cnt= 10 LVTS TC 6, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90456.013382] (3)[23446:kworker/3:1][bq27z561] fg_update_status:
SOC:59,Volt:3923,Cur:208,Temp:343,RM:2233,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90456.013703] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90456.014551] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90456.015135] (1)[118:pd_dbg_info]///PD dbg info 128d
<5>[90456.015163] (1)[118:pd_dbg_info]<90456.014>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90456.015163] <90456.015>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90456.021810] (3)[2356:kworker/3:5]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90456.033739] (1)[853:[email protected]]healthd: battery l=59 v=3923 t=34.3 h=2
st=3 c=208 fc=4110000 cc=670 chg=
<12>[90456.033809] (1)[853:[email protected]]healthd: battery l=59 v=3923 t=34.3 h=2
st=3 c=208 fc=4110000 cc=670 chg=
<12>[90456.041644] (1)[853:[email protected]]healthd: battery l=59 v=3923 t=34.3 h=2
st=3 c=208 fc=4110000 cc=670 chg=
<6>[90456.061721] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<12>[90456.063451] (2)[853:[email protected]]healthd: battery l=59 v=3923 t=34.3 h=2
st=3 c=208 fc=4110000 cc=670 chg=
<12>[90456.063522] (2)[853:[email protected]]healthd: battery l=59 v=3923 t=34.3 h=2
st=3 c=208 fc=4110000 cc=670 chg=
<12>[90456.067712] (5)[853:[email protected]]healthd: battery l=59 v=3923 t=34.3 h=2
st=3 c=208 fc=4110000 cc=670 chg=
<6>[90456.098286] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90456.254319] (1)[1888:CachedAppOptimi]stop reclaim: force
<14>[90456.714951] (1)[1:init]init: Sending signal 9 to service 'mdnsd' (pid 7677)
process group...
<14>[90456.721081] (1)[1:init]libprocessgroup: Successfully killed process cgroup
uid 1020 pid 7677 in 5ms
<14>[90456.722550] (0)[1:init]init: Control message: Processed ctl.stop for
'mdnsd' from pid: 837 (/system/bin/netd)
<14>[90456.722959] (0)[1:init]init: Service 'mdnsd' (pid 7677) received signal 9
oneshot service took 20.764999 seconds in background
<6>[90456.826736] (1)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90456.827089] (2)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<5>[90456.956355] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90456.956435] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90456.956487] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90456.956529] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90457.086843] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90457.103799] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90457.683194] -(0)[0:swapper/0]lvts_paused = 1
<5>[90457.683273] -(0)[0:swapper/0]Cnt= 10 LVTS TC 2, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<4>[90457.738126] -(4)[1271:app]CPU4: update max cpu_capacity 826
<6>[90458.113423] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90458.114508] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90458.328100] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 497,
377, 361, 416, 203, 74, 49, 29, success counter cpu: 176, 72, 80, 93, 43, 8, 1, 0,
fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 297, 192, 159,
195, 97, 15, 13, 3, o: 1-7, p: , f: , t: 90458460000000, 90458460000000,
90458464000000, 90458524000000, 90458620000000, 90458873402773, 90458460000000,
90458684000000,
<5>[90458.653817] (3)[23446:kworker/3:1]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<6>[90458.654219] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x10,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458654206442,15000000]
<6>[90458.654247] (4)[435:wdtk-4][thread:435][RT:90458654238442] 2022-12-15
05:45:40.427912 UTC;android time 2022-12-15 12:45:40.427912
<3>[90458.655981] (3)[23446:kworker/3:1]ghr: scsi_execute exit ret = 0x0
<6>[90458.656046] (3)[23446:kworker/3:1]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90458.656065] (3)[23446:kworker/3:1]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90458.656442] (3)[23446:kworker/3:1]ufshcd bootdevice: rs,ret 0,397 us
<6>[90458.694622] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x12,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458694590211,14959616]
<6>[90458.717498] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0x1a,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458717470749,14936736]
<6>[90458.717846] (0)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90458.720644] -(2)[27694:kworker/u17:1][ccci1/fsm]received MD status response
97640043
<6>[90458.720782] (0)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<6>[90458.749156] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x1e,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458749129826,14905076]
<6>[90458.749168] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0x9e,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458749147673,14905059]
<6>[90458.749217] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0xbe,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458749205519,14905001]
<6>[90458.749269] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0xfe,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458749259134,14904947]
<6>[90458.749312] (0)[431:wdtk-0][wdk-k]
cpu=0,lbit=0xff,cbit=0xff,7,1,2667932697,90434387905769,90434574297153,
[90458749292980,14904913]
<5>[90458.956765] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90458.956864] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90458.956920] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90458.956962] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90458.959512] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90458.983010] -(1)[0:swapper/1]lvts_paused = 1
<6>[90459.127229] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90459.133879] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90459.337616] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 169, r13 = 0x84000880, debug_flag = 0xf80403ff
0x4001e00e, connectivity sleep, modem sleep, subsys sleep r12 = 0x10000, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24163fb, req_sta = 0x1c00000 0x0
0x50000011 0x1e0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a56,
wake_misc = 0x390000, pcm_flag = 0xc38702 0x0 0xc38302 0xc38302, req = 0x0,
clk_settle = 0x60fe,
<6>[90459.337732] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90459.650354] (3)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90459.741776] (2)[0:swapper/2][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90459.752142] (3)[10823:Binder:636_2]active wakeup source: ttyC0
<5>[90459.947287] -(1)[0:swapper/1]lvts_paused = 1
<5>[90459.947388] -(1)[0:swapper/1]Cnt= 10 LVTS TC 6, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<5>[90460.035047] -(1)[0:swapper/1]lvts_paused = 1
<6>[90460.135692] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90460.161453] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90460.161601] (1)[7386:kworker/1:0]PM: Syncing filesystems ...
<6>[90460.161623] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<7>[90460.161721] (0)[2328:kworker/u16:1]PM: ++
<6>[90460.171327] (2)[26031:kworker/2:5]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90460.171374] (2)[26031:kworker/2:5]ufshcd bootdevice: rr,ret 0,2043 us
<7>[90460.183052] (0)[2328:kworker/u16:1]PM: --
<4>[90460.270761] done.
<6>[90460.285155] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10192460,13539,19875scp1 sleep state: 54818,23417,23417
<6>[90460.285212] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90460.285212]
<6>[90460.285237] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90460.285237]
<6>[90460.285260] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90460.285260]
<6>[90460.285283] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90460.285283]
<5>[90460.285306] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90460.285324] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90460.285361] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90460.285391] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90460.285928] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90460.285968] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:45:42.059630957 UTC
<6>[90460.286178] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90460.286237] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90460.286265] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90460.286291] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90460.286590] (2)[576:logd.auditd]type=1400 audit(1671083142.056:1623195):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90460.287770] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90460.289071] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90460.289100] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<5>[90460.302356] (2)[347:battery_thread]
[fgauge_read_boot_battery_plug_out_status] rtc_invalid 1 plugout 1
bat_plug_out_time 31 sp3:0x0 pl:0 0
<6>[90460.305248] (2)[347:battery_thread]mt635x-auxadc mt635x-auxadc: name:BATADC,
channel=0, adc_out=0x4fe3, adc_result=3931
<6>[90460.309925] (3)[10823:Binder:636_2]PM: Last active Wakeup Source: mt635x-
auxadc
<3>[90460.309958] (3)[10823:Binder:636_2]Freezing of tasks aborted after 0.023
seconds
<6>[90460.309980] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90460.309996] (1)[1315:receiver]Restarting tasks ...
<6>[90460.316481] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90460.316894] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90460.316978] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90460.332524] done.
<5>[90460.332568] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90460.332590] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<3>[90460.336323] -(1)[249:chre_kthread][hf_manager][android.hardwar][857:933]
buffer full 1 217856029471998
<6>[90460.340427] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10192463,13544,19895scp1 sleep state: 54820,23417,23417
<6>[90460.340451] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90460.340451]
<5>[90460.340467] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90460.340478] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90460.340498] -(1)[10823:Binder:636_2]Abort: Last active Wakeup Source: mt635x-
auxadc
<5>[90460.340512] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<3>[90460.340991] -(0)[249:chre_kthread][hf_manager][android.hardwar][857:933]
buffer full 1 217858786419160
<5>[90460.341879] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90460.342866] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90460.342909] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:45:42.116560495 UTC
<6>[90460.343099] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<36>[90460.343163] (2)[576:logd.auditd]type=1400 audit(1671083142.112:1623196):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90460.343185] (1)[7386:kworker/1:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90460.343195] (1)[7386:kworker/1:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90460.343239] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90460.343267] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90460.343296] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90460.343314] (1)[10823:Binder:636_2]PM: suspend exit
<5>[90460.344915] (4)[347:battery_thread]lbat 0 0 0 0
<5>[90460.344942] (4)[347:battery_thread]car[0,0,0,0,0, cycle_car:0,ncar:0] c:0
102000 vbat:3931 vbus:0 soc:-1 50 gm3:1 0 0 0
<5>[90460.344979] (4)[347:battery_thread]tmp:34 65535 65535 hcar2:65535
lcar2:65535 time:217868 sw_iavg:0 0 0 nafg_m:0 0 0
<6>[90460.345652] (4)[347:battery_thread]mt635x-auxadc mt635x-auxadc: name:VBIF,
channel=11, adc_out=0x9e3, adc_result=2780
<5>[90460.346828] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90460.545749] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90460.545792] (2)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90460.546044] (2)[7383:kworker/u16:6]PM: ++
<7>[90460.553925] (2)[7383:kworker/u16:6]PM: --
<5>[90460.585683] (0)[347:battery_thread]GM3log-nint-nafg 217868 90460 0 0 0 0 0
<5>[90460.585707] (0)[347:battery_thread]FG daemon is disabled
<4>[90460.657780] done.
<6>[90460.665334] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10192479,13549,19910scp1 sleep state: 54822,23417,23417
<6>[90460.665370] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90460.665370]
<6>[90460.665395] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90460.665395]
<6>[90460.665418] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90460.665418]
<6>[90460.665440] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90460.665440]
<5>[90460.665462] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90460.665481] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90460.665583] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90460.665617] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90460.665937] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90460.665972] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:45:42.439634957 UTC
<6>[90460.666165] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90460.666224] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90460.666251] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90460.666275] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90460.666503] (2)[576:logd.auditd]type=1400 audit(1671083142.436:1623197):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90460.667709] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<4>[90460.695494] (elapsed 0.029 seconds) done.
<6>[90460.695535] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90460.695555] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90460.754885] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:332
<3>[90460.754930] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90460.755034] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90460.756426] (0)[23437:kworker/u16:3]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90460.756922] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90460.757035] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90460.757072] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90460.758506] (0)[23437:kworker/u16:3]ghr: scsi_execute exit ret = 0x0
<3>[90460.758527] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90460.759862] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90460.759904] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90460.759932] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90460.760730] (3)[10823:Binder:636_2]alarmtimer_suspend convert
217885062000000 to 2022/12/15 05:45:59 (now = 2022/12/15 05:45:42)
<5>[90460.760848] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:46:00 (1)
<5>[90460.764206] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90460.764617] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90460.764652] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90460.764663] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90460.764760] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90460.764799] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90460.764841] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90460.764841]
<6>[90460.764863] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90460.764863]
<6>[90460.764884] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90460.764884]
<6>[90460.764905] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90460.764905]
<6>[90460.765020] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90460.765062] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90460.765085] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90460.765863] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90460.765946] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90460.766164] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90460.766493] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90460.766514] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90460.766908] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90460.766926] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90460.767338] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90460.767690] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,776 us
<6>[90460.768442] (3)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000f
<6>[90460.768701] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90460.768824] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90460.769204] (3)[10823:Binder:636_2]suspend of devices complete after 56.541
msecs
<6>[90460.774505] (3)[10823:Binder:636_2]late suspend of devices complete after
5.271 msecs
<4>[90460.774531] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90460.779088]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90460.779779] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90460.780129] (0)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90460.780783] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.463 msecs
<6>[90460.780863] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90460.780863] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90460.780863] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90460.780943] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90460.780943] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90460.780943] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90460.780943] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90460.780943] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90460.780943] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CONN2AP_SPM_WAKEUP_B, timer_out = 531217, r13 = 0x8400e890, debug_flag =
0xf8061bff 0x4001e66e, connectivity not sleep, modem sleep, subsys sleep r12 =
0x20, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767fb, req_sta =
0x1c3d000 0x180000 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0,
raw_ext_sta = 0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000
0xc38000, req = 0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x82f123f7, wlk_cntcv_h =
0x293, 26M_off_pct = 81
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 16.211 seconds
<4>[90460.780943] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90460.780943] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90460.780943] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90460.780943] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90460.780943] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90460.780943] -(3)[0:swapper/3]Call trace:
<4>[90460.780943] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90460.780943] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90460.780943] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90460.780943] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90460.780943] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90460.780943] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90460.780943] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90460.780943] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90460.780943] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90460.780943] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90460.780943] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90460.780943] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90460.780943] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90460.780943] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90460.780943] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90460.780943] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90460.780943] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90460.780943] -(3)[0:swapper/3]---[ end trace 308173880bd0bf91 ]---
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 454098 (32k)
<4>[90460.780943] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 13.857/16.664/16.664/14.446/16.6664 seconds
<6>[90460.780943] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90460.781088] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x5440000, 0x4040000, 0x0)
<6>[90460.781133] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90460.781092] -(3)[0:swapper/3]pm_system_irq_wakeup: 458 triggered wlan0
<6>[90460.783419] (1)[23437:kworker/u16:3]mtu3_phone musb-hdrc: mtu3_resume
<5>[90460.784762]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90460.784790] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90460.786846] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90460.792760] (0)[10823:Binder:636_2]noirq resume of devices complete after
10.871 msecs
<6>[90460.793402] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: WLAN
hif_thread WLAN interrupt [timerfd]
<4>[90460.793427] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90460.798449] (0)[10823:Binder:636_2]early resume of devices complete after
4.960 msecs
<5>[90460.798893] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90460.800881] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90460.801204] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90460.801243] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1549 us
<5>[90460.801877] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90460.802245] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90460.802271] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90460.802354] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90460.802388] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90460.802478] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90460.802668] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90460.802726] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90460.802749] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90460.802832] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90460.802873] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90460.802995] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90460.803020] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90460.803033] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90460.803180] (0)[10823:Binder:636_2]zcvf, no update time:42 96 avgc:0
avgc_thread
<5>[90460.803205] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90460.806161] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90460.807157] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90460.807247] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90460.807581] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90460.807615] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90460.808301] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90460.808499] (0)[25356:kworker/0:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90460.810931] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90460.811416] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90460.812591] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90460.812634] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90460.812695] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90460.815873] (2)[10823:Binder:636_2]resume of devices complete after 17.390
msecs
<3>[90460.820924] (2)[7519:kworker/2:4]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90460.820948] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90460.821680] (2)[7519:kworker/2:4]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90460.821701] (2)[7519:kworker/2:4][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90460.821902] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90460.821920] (1)[1315:receiver]Restarting tasks ...
<6>[90460.827837] (1)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90460.828352] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90460.828707] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90460.830792] -(6)[1893:AlarmManager]alarmtimer_enqueue, 217885062000000
<4>[90460.837673] done.
<5>[90460.837701] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90460.837718] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90460.840531] (0)[853:[email protected]]healthd: battery l=59 v=3936 t=34.3 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90460.840595] (0)[853:[email protected]]healthd: battery l=59 v=3936 t=34.3 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<5>[90460.842354] (2)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90460.842633] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193214,13737,20119scp1 sleep state: 54824,23417,23417
<6>[90460.842654] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90460.842654]
<5>[90460.842673] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90460.842687] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90460.842731] -(2)[10823:Binder:636_2]Resume caused by IRQ 458, wlan0
<5>[90460.842747] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90460.843807] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90460.844072] -(2)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90460.844524] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90460.844567] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:45:58.833415573 UTC
<6>[90460.844742] (2)[7519:kworker/2:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:4><0x1d5f>
<6>[90460.844838] (2)[7519:kworker/2:4]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90460.844852] (2)[7519:kworker/2:4]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90460.844872] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0300c0e] bgf wf
<6>[90460.844888] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000350], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90460.844917] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<36>[90460.844962] (0)[576:logd.auditd]type=1400 audit(1671083158.829:1623198):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90460.847509] (2)[10823:Binder:636_2]PM: suspend exit
<12>[90460.847928] (6)[853:[email protected]]healthd: battery l=59 v=3936 t=34.3 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90460.859133] (1)[853:[email protected]]healthd: battery l=59 v=3936 t=34.3 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<5>[90460.919932] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217888469000000
<5>[90460.931357] -(3)[3755:Binder:1454_7]alarmtimer_enqueue, 217888469000000
<6>[90460.931420] -(5)[7033:lowpool[171]][ccci1/dpmaif]tx0_resume_tx: 0x5440000,
0x4040000, 0x0
<6>[90460.933725] -(1)[842:Binder:836_2][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x4040000, 0x0
<6>[90460.950562] (4)[10823:Binder:636_2]active wakeup source: main
<6>[90460.950589] (4)[10823:Binder:636_2]active wakeup source: usb
<6>[90460.950617] (4)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90460.953478] (2)[26031:kworker/2:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90460.957164] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90460.957246] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90460.957301] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90460.957344] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<3>[90461.007927] (0)[7416:kworker/0:2]typec_cc_orientation = 2
<3>[90461.057001] (0)[7416:kworker/0:2]chg_type = 0, hvdcp_type = 0
<6>[90461.111208] (2)[26031:kworker/2:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90461.144089] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90461.210063] -(2)[328:irq/46-5-0034][ccci1/dpmaif]tx1_resume_tx: 0x80000,
0x4040000, 0x0
<6>[90461.210176] -(2)[328:irq/46-5-0034][ccci1/dpmaif]clear txq1_resume_done:
0x80000, 0x40000, 0x0
<5>[90461.232196] -(0)[3755:Binder:1454_7]alarmtimer_enqueue, 217888469000000
<5>[90461.235825] -(0)[3755:Binder:1454_7]alarmtimer_enqueue, 217888469000000
<3>[90461.264644] (0)[7416:kworker/0:2]get_connector_temp: connector_temp:332
<6>[90461.264709] (0)[7416:kworker/0:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90461.264774] (0)[7416:kworker/0:2]mt_charger_plugin plugin:0
<12>[90461.274541] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.3 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90461.274614] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.3 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<5>[90461.277822] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<12>[90461.281418] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.3 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90461.321604] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.3 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90461.321690] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.3 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90461.328533] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.3 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<6>[90461.538551] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10244,
dram:0%, syspll:0%, bus26m:52%
<6>[90461.538626] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90461.538646] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90461.538656] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90461.538671] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90461.538680] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14992)
<6>[90461.538693] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33815,33867692,5519), tx=(13565,2344,11221), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90461.538768] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90461.853779] (2)[26031:kworker/2:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:5><0x65af>
<6>[90461.910699] (0)[3064:kworker/0:0][bq27z561] fg_update_status:
SOC:59,Volt:3934,Cur:150,Temp:344,RM:2232,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90461.910860] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90461.912067] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90461.912665] (1)[118:pd_dbg_info]///PD dbg info 128d
<5>[90461.912691] (1)[118:pd_dbg_info]<90461.912>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90461.912691] <90461.912>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90461.921675] (0)[7416:kworker/0:2]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90461.935207] (2)[853:[email protected]]healthd: battery l=59 v=3934 t=34.4 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90461.935278] (2)[853:[email protected]]healthd: battery l=59 v=3934 t=34.4 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90461.941407] (2)[853:[email protected]]healthd: battery l=59 v=3934 t=34.4 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<12>[90461.956027] (2)[853:[email protected]]healthd: battery l=59 v=3934 t=34.4 h=2
st=3 c=150 fc=4110000 cc=670 chg=
<6>[90462.154042] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90462.238008] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90462.238053] (1)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90462.238279] (1)[23443:kworker/u16:5]PM: ++
<7>[90462.247192] (2)[23443:kworker/u16:5]PM: --
<6>[90462.282650] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90462.282899] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90462.282990] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90462.283040] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<4>[90462.345942] done.
<5>[90462.350889] -(3)[0:swapper/3]lvts_paused = 1
<6>[90462.356066] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193286,13750,20139scp1 sleep state: 54826,23417,23417
<6>[90462.356118] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90462.356118]
<6>[90462.356142] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90462.356142]
<6>[90462.356164] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90462.356164]
<6>[90462.356187] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90462.356187]
<5>[90462.356209] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90462.356227] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90462.356262] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90462.356291] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90462.356641] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90462.356674] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:46:00.345536803 UTC
<6>[90462.356868] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90462.356924] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90462.356951] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90462.356974] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90462.357169] (0)[576:logd.auditd]type=1400 audit(1671083160.341:1623199):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90462.358446] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90462.359853] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90462.359877] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90462.379025] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: ttyC0
<3>[90462.379063] (3)[10823:Binder:636_2]Freezing of tasks aborted after 0.022
seconds
<6>[90462.379085] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90462.379100] (0)[1314:receiver]Restarting tasks ...
<6>[90462.385185] (0)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90462.385231] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90462.385800] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<4>[90462.400913] done.
<5>[90462.400945] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90462.400966] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90462.405255] (2)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90462.406155] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193289,13751,20149scp1 sleep state: 54828,23420,23420
<6>[90462.406180] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90462.406180]
<5>[90462.406199] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90462.406215] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90462.406235] -(2)[10823:Binder:636_2]Abort: Pending Wakeup Sources: ttyC0
<5>[90462.406250] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90462.407460] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90462.408335] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90462.408376] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:46:00.397227957 UTC
<36>[90462.408559] (0)[576:logd.auditd]type=1400 audit(1671083160.393:1623200):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90462.408589] (2)[26031:kworker/2:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:5><0x65af>
<6>[90462.408679] (2)[26031:kworker/2:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90462.408699] -(2)[26031:kworker/2:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90462.408712] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90462.408752] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90462.408787] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90462.408805] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90462.611018] (2)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90462.783467] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90462.783512] (2)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90462.783624] (2)[23443:kworker/u16:5]PM: ++
<7>[90462.791754] (2)[23443:kworker/u16:5]PM: --
<5>[90462.825679] (2)[26031:kworker/2:5]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<5>[90462.826041] (2)[7519:kworker/2:4]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<3>[90462.828163] (2)[26031:kworker/2:5]ghr: scsi_execute exit ret = 0x0
<3>[90462.828221] (2)[7519:kworker/2:4]ghr: scsi_execute exit ret = 0x0
<4>[90462.890751] done.
<5>[90462.896099] -(2)[0:swapper/2]lvts_paused = 1
<5>[90462.896175] -(2)[0:swapper/2]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90462.899633] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193312,13755,20163scp1 sleep state: 54830,23420,23420
<6>[90462.899685] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90462.899685]
<6>[90462.899709] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90462.899709]
<6>[90462.899733] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90462.899733]
<6>[90462.899755] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90462.899755]
<5>[90462.899777] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90462.899795] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90462.899826] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90462.899854] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90462.900151] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90462.900184] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:46:00.889046957 UTC
<6>[90462.900371] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90462.900428] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90462.900455] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90462.900477] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90462.900629] (0)[576:logd.auditd]type=1400 audit(1671083160.885:1623201):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90462.901931] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90462.903420] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90462.903447] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90462.927996] (elapsed 0.027 seconds) done.
<6>[90462.928034] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90462.928054] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90462.981072] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:332
<3>[90462.981123] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90462.981191] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90462.982717] (1)[25368:kworker/u16:9]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90462.983376] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90462.983491] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90462.983527] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90462.984340] (1)[25368:kworker/u16:9][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90462.984979] (1)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<6>[90462.985792] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90462.985821] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90462.985850] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<3>[90462.986559] (2)[10823:Binder:636_2]dpm_run_callback():
platform_pm_suspend+0x0/0x54 returns -16
<3>[90462.986592] (2)[10823:Binder:636_2]PM: Device alarmtimer failed to suspend:
error -16
<6>[90462.986616] (2)[10823:Binder:636_2]suspend of devices aborted after 44.079
msecs
<3>[90462.986634] (2)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<6>[90462.987135] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90462.988098] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90462.988188] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90462.988491] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90462.988525] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90462.989123] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90462.989268] (2)[23427:kworker/2:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90462.990849] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90462.991427] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90462.992228] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90462.992781] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90462.993340] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90462.995804] (0)[10823:Binder:636_2]resume of devices complete after 9.143
msecs
<6>[90462.999989] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90463.000016] (0)[7416:kworker/0:2]Restarting tasks ...
<3>[90463.001063] (0)[7416:kworker/0:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90463.001103] (0)[7416:kworker/0:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90463.001834] (0)[7416:kworker/0:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90463.001859] (0)[7416:kworker/0:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<5>[90463.006941] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90463.007001] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90463.007041] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90463.007074] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90463.008481] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90463.008494] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90463.008941] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90463.024665] done.
<5>[90463.024727] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90463.024749] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90463.028735] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90463.029620] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193320,13760,20178scp1 sleep state: 54832,23420,23420
<6>[90463.029648] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90463.029648]
<5>[90463.029840] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90463.029856] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90463.029878] -(2)[10823:Binder:636_2]Abort: Callback failed on alarmtimer in
platform_pm_suspend+0x0/0x54 returned -16
<5>[90463.030052] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90463.031886] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90463.033380] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<36>[90463.033457] (0)[576:logd.auditd]type=1400 audit(1671083161.017:1623202):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<4>[90463.033610] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:46:01.022274957 UTC
<6>[90463.033796] (2)[26031:kworker/2:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:5><0x65af>
<6>[90463.033906] (2)[26031:kworker/2:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90463.033925] -(2)[26031:kworker/2:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90463.033938] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90463.033999] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90463.034034] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90463.034053] (2)[10823:Binder:636_2]PM: suspend exit
<3>[90463.084651] (2)[23427:kworker/2:2]typec_cc_orientation = 2
<6>[90463.162383] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90463.187034] (2)[23427:kworker/2:2]chg_type = 0, hvdcp_type = 0
<6>[90463.240576] (2)[30082:kworker/2:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90463.318658] (2)[30082:kworker/2:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<4>[90463.329656] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 541,
562, 600, 333, 232, 100, 92, 52, success counter cpu: 163, 137, 62, 74, 51, 7, 16,
1, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 249, 192, 129,
129, 75, 15, 21, 3, o: 2-7, p: , f: 0, t: 90463456000000, 90463460000000,
90463460000000, 90463456000000, 90463694039741, 90463644000000, 90463644000000,
90463740000000,
<3>[90463.370594] (2)[23427:kworker/2:2]get_connector_temp: connector_temp:332
<6>[90463.370849] (2)[23427:kworker/2:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90463.370916] (2)[23427:kworker/2:2]mt_charger_plugin plugin:0
<6>[90463.435379] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90463.435432] (2)[10823:Binder:636_2]active wakeup source: alarmtimer
<6>[90464.061679] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90464.090523] -(4)[0:swapper/4][bq27z561] fg_update_status:
SOC:59,Volt:3928,Cur:190,Temp:344,RM:2232,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90464.095748] -(4)[0:swapper/4]lvts_paused = 1
<5>[90464.095812] -(4)[0:swapper/4]Cnt= 10 LVTS TC 1, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90464.171857] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90464.307667] -(3)[1893:AlarmManager]alarmtimer_enqueue: 1 callbacks suppressed
<5>[90464.307686] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217902531000000
<5>[90464.313057] -(3)[1893:AlarmManager]alarmtimer_enqueue, 217902531000000
<5>[90464.329417] (3)[857:[email protected]][mtk_nanohub]mtk_nanohub_flush [1]
<5>[90464.333458] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[1] flush complete
<6>[90464.353569] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CONN2AP_SPM_WAKEUP_B, timer_out = 531217, r13 = 0x8400e890, debug_flag =
0xf8061bff 0x4001e66e, connectivity not sleep, modem sleep, subsys sleep r12 =
0x20, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767fb, req_sta =
0x1c3d000 0x180000 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0,
raw_ext_sta = 0x785255, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000
0xc38000, req = 0x0, clk_settle = 0x60fe,
<6>[90464.353611] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<5>[90464.363429] -(4)[3755:Binder:1454_7]alarmtimer_enqueue, 217893527000000
<6>[90464.993377] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90464.993425] (3)[23438:kworker/u16:4]PM: Syncing filesystems ...
<7>[90464.993634] (3)[23438:kworker/u16:4]PM: ++
<7>[90465.001371] (0)[23438:kworker/u16:4]PM: --
<5>[90465.007295] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90465.007310] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90465.007396] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90465.007450] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90465.007493] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90465.085904] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<4>[90465.101757] done.
<6>[90465.106698] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193418,13790,20223scp1 sleep state: 54834,23420,23420
<6>[90465.106728] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90465.106728]
<6>[90465.106752] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90465.106752]
<6>[90465.106775] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90465.106775]
<6>[90465.106797] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90465.106797]
<5>[90465.106818] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90465.106836] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90465.106864] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90465.106907] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90465.107171] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90465.107203] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:46:03.096065804 UTC
<6>[90465.107368] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90465.107425] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90465.107451] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90465.107473] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90465.107592] (0)[576:logd.auditd]type=1400 audit(1671083163.093:1623203):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90465.108575] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90465.110086] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90465.110114] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90465.134680] (elapsed 0.027 seconds) done.
<6>[90465.134717] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90465.134736] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90465.190946] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:332
<3>[90465.190994] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90465.191061] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90465.192473] (0)[25368:kworker/u16:9]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90465.192820] (0)[23438:kworker/u16:4]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90465.193099] (0)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90465.193268] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90465.193382] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90465.193416] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90465.194358] (0)[25368:kworker/u16:9][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90465.195011] (0)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90465.195026] (4)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90465.195054] (1)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<6>[90465.196123] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90465.196147] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90465.196175] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90465.196986] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217893527000000 to 2022/12/15 05:46:07 (now = 2022/12/15 05:46:02)
<5>[90465.197101] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:46:08 (1)
<5>[90465.200775] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90465.201217] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.201254] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90465.201265] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.201369] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90465.201410] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.201455] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90465.201455]
<6>[90465.201478] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90465.201478]
<6>[90465.201566] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90465.201566]
<6>[90465.201589] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90465.201589]
<6>[90465.201706] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90465.201748] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90465.201771] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90465.202393] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90465.202475] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90465.202702] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90465.203043] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90465.203065] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90465.203488] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90465.203507] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90465.203980] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90465.204281] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,787 us
<6>[90465.205227] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90465.205569] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90465.205698] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90465.206087] (0)[10823:Binder:636_2]suspend of devices complete after 57.037
msecs
<6>[90465.213102] (0)[10823:Binder:636_2]late suspend of devices complete after
6.984 msecs
<4>[90465.213128] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90465.219464]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90465.220095] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90465.220477] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90465.221259] (0)[10823:Binder:636_2]noirq suspend of devices complete after
7.189 msecs
<6>[90465.221334] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90465.221334] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90465.221334] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<6>[90465.221414] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90465.221414] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90465.221414] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90465.221414] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90465.221414] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90465.221414] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 165883, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7fb, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x8a4edde0, wlk_cntcv_h = 0x293, 26M_off_pct =
78
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 5.062 seconds
<4>[90465.221414] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90465.221414] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90465.221414] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90465.221414] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90465.221414] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90465.221414] -(0)[0:swapper/0]Call trace:
<4>[90465.221414] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90465.221414] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90465.221414] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90465.221414] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90465.221414] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90465.221414] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90465.221414] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90465.221414] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90465.221414] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90465.221414] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90465.221414] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90465.221414] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90465.221414] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90465.221414] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90465.221414] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90465.221414] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90465.221414] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90465.221414] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90465.221414] -(0)[0:swapper/0]---[ end trace 308173880bd0bf92 ]---
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 135099 (32k)
<4>[90465.221414] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 4.122/5.352/5.352/4.484/5.5352 seconds
<6>[90465.221414] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90465.221414] -(0)[0:swapper/0]EINT 222 is pending
<6>[90465.221558] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x40000, 0x0)
<6>[90465.221604] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90465.221572] -(0)[0:swapper/0]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90465.224006] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90465.225010]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90465.225033] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90465.227147] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90465.232979] (0)[10823:Binder:636_2]noirq resume of devices complete after
10.362 msecs
<6>[90465.233248] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90465.233365] -(1)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90465.233466] -(1)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90465.233578] (1)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90465.233719] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90465.233748] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90465.238933] (0)[10823:Binder:636_2]early resume of devices complete after
5.127 msecs
<5>[90465.239374] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90465.241398] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90465.241787] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90465.241830] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1621 us
<5>[90465.242100] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90465.242709] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90465.242737] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90465.242819] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90465.242851] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90465.242942] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90465.243145] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90465.243210] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90465.243233] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90465.243317] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.243358] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90465.243484] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.243509] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90465.243522] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90465.243668] (0)[10823:Binder:636_2]zcvf, no update time:51 96 avgc:0
avgc_thread
<5>[90465.243697] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90465.246903] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90465.247983] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90465.248077] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90465.248408] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90465.248442] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90465.249315] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90465.249718] (0)[30807:kworker/0:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90465.251539] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90465.252204] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90465.252914] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90465.253657] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90465.253765] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90465.256543] (2)[10823:Binder:636_2]resume of devices complete after 17.577
msecs
<3>[90465.260906] (2)[23427:kworker/2:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90465.260931] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90465.261712] (2)[23427:kworker/2:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90465.261734] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90465.261784] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90465.261810] (5)[1315:receiver]Restarting tasks ...
<6>[90465.269431] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90465.269779] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90465.269849] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90465.283331] done.
<5>[90465.283366] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90465.283380] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90465.286119] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90465.286790] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90465.293190] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193652,13850,20309scp1 sleep state: 54836,23420,23420
<6>[90465.293216] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90465.293216]
<5>[90465.293228] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90465.293237] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90465.293256] -(2)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90465.293268] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90465.294202] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90465.294352] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90465.294984] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90465.295018] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:46:08.349816495 UTC
<6>[90465.295204] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90465.295272] (2)[23427:kworker/2:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90465.295282] (2)[23427:kworker/2:2]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90465.295299] (0)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90465.295310] (0)[576:logd.auditd]type=1400 audit(1671083168.348:1623204):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90465.295436] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90465.295455] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90465.295470] (2)[10823:Binder:636_2]PM: suspend exit
<5>[90465.299448] -(4)[1893:AlarmManager]alarmtimer_enqueue, 217902531000000
<5>[90465.304484] (1)[857:[email protected]][mtk_nanohub]mtk_nanohub_flush [1]
<5>[90465.307924] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[1] flush complete
<3>[90465.316831] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90465.320805] -(1)[3755:Binder:1454_7]alarmtimer_enqueue, 217902531000000
<3>[90465.340613] (0)[30822:kworker/0:7]typec_cc_orientation = 2
<6>[90465.397000] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90465.397047] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90465.451684] (2)[30082:kworker/2:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90465.497816] (0)[30822:kworker/0:7]chg_type = 0, hvdcp_type = 0
<3>[90465.554097] (0)[30822:kworker/0:7]get_connector_temp: connector_temp:332
<6>[90465.554176] (0)[30822:kworker/0:7][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90465.554248] (0)[30822:kworker/0:7]mt_charger_plugin plugin:0
<6>[90465.600409] (2)[30082:kworker/2:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90465.772806] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90465.772848] (4)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90465.773542] (4)[7608:kworker/u16:11]PM: ++
<7>[90465.783238] (3)[7608:kworker/u16:11]PM: --
<4>[90465.878880] done.
<3>[90465.885805] (1)[7386:kworker/1:0][mtk_nanohub]rtc_compensation_suspend
suspend,drop time sync
<4>[90465.885917] (4)[7032:kworker/4:0]power_debug_work: start
<6>[90465.888207] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10193680,13859,20338scp1 sleep state: 54838,23420,23420
<6>[90465.888259] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90465.888259]
<6>[90465.888284] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90465.888284]
<6>[90465.888307] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90465.888307]
<6>[90465.888329] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90465.888329]
<5>[90465.888350] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90465.888368] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90465.888406] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90465.888435] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90465.888752] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90465.888785] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:46:08.943593495 UTC
<6>[90465.888980] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90465.889038] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90465.889065] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90465.889088] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90465.889286] (0)[576:logd.auditd]type=1400 audit(1671083168.940:1623205):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90465.890496] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90465.891867] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90465.891895] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90465.916393] (elapsed 0.027 seconds) done.
<6>[90465.916427] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90465.916446] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<3>[90465.970604] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:332
<3>[90465.970648] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90465.970710] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90465.972109] (0)[23436:kworker/u16:0]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90465.972368] (3)[7608:kworker/u16:11]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90465.972634] (2)[25368:kworker/u16:9]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90465.972980] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90465.973107] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90465.973144] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90465.974642] (0)[23436:kworker/u16:0][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90465.974704] (0)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90465.974817] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<3>[90465.974838] (2)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<6>[90465.976223] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90465.976248] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90465.976280] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90465.977119] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217902531000000 to 2022/12/15 05:46:16 (now = 2022/12/15 05:46:08)
<5>[90465.977236] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:46:17 (1)
<5>[90465.981104] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90465.981728] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.981771] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90465.981782] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.981889] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90465.981933] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90465.981981] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90465.981981]
<6>[90465.982004] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90465.982004]
<6>[90465.982027] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90465.982027]
<6>[90465.982048] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90465.982048]
<6>[90465.982180] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90465.982227] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90465.982252] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90465.982961] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90465.983049] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90465.983290] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90465.983664] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90465.983687] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90465.984152] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90465.984171] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90465.984659] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90465.985058] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,901 us
<6>[90465.985994] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90465.986289] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90465.986409] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90465.986862] (0)[10823:Binder:636_2]suspend of devices complete after 55.818
msecs
<6>[90465.992652] (0)[10823:Binder:636_2]late suspend of devices complete after
5.759 msecs
<4>[90465.992680] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90465.997864]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90465.998526] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90465.998872] (2)[25368:kworker/u16:9]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90465.999538] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.824 msecs
<6>[90465.999623] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90465.999623] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90465.999623] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90465.999705] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90465.999705] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90465.999705] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 269284, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x914825c7, wlk_cntcv_h = 0x293, 26M_off_pct =
83
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 8.217 seconds
<4>[90465.999705] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90465.999705] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90465.999705] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90465.999705] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90465.999705] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90465.999705] -(0)[0:swapper/0]Call trace:
<4>[90465.999705] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90465.999705] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90465.999705] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90465.999705] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90465.999705] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90465.999705] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90465.999705] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90465.999705] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90465.999705] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90465.999705] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90465.999705] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90465.999705] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90465.999705] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90465.999705] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90465.999705] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90465.999705] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90465.999705] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90465.999705] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90465.999705] -(0)[0:swapper/0]---[ end trace 308173880bd0bf93 ]---
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 200870 (32k)
<4>[90465.999705] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 6.130/7.556/7.556/6.305/7.7556 seconds
<6>[90465.999705] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90465.999705] -(0)[0:swapper/0]EINT 222 is pending
<6>[90465.999850] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0xc0000, 0x40000, 0x0)
<6>[90465.999894] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90465.999862] -(0)[0:swapper/0]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90466.002519] (2)[25368:kworker/u16:9]mtu3_phone musb-hdrc: mtu3_resume
<5>[90466.004458]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90466.004487] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90466.006549] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90466.012485] (1)[10823:Binder:636_2]noirq resume of devices complete after
11.734 msecs
<6>[90466.012751] (2)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90466.012871] -(2)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90466.012967] -(2)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<6>[90466.013054] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd]
<4>[90466.013079] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<5>[90466.013102] (2)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90466.018426] (1)[10823:Binder:636_2]early resume of devices complete after
5.283 msecs
<5>[90466.018796] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90466.020812] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90466.021164] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90466.021204] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1603 us
<5>[90466.021809] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90466.022242] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90466.022270] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90466.022353] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90466.022386] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90466.022473] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90466.022676] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90466.022732] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90466.022757] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90466.022846] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90466.022887] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90466.023011] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90466.023036] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90466.023050] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90466.023195] (1)[10823:Binder:636_2]zcvf, no update time:61 96 avgc:0
avgc_thread
<5>[90466.023223] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90466.026599] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90466.027693] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90466.027789] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90466.028109] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90466.028145] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90466.028889] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90466.029048] (3)[30078:kworker/3:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90466.031176] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90466.031497] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90466.031807] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90466.032462] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90466.033895] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90466.036371] (1)[10823:Binder:636_2]resume of devices complete after 17.909
msecs
<3>[90466.041680] (1)[7386:kworker/1:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90466.041705] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90466.042385] (1)[7386:kworker/1:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90466.042407] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90466.042621] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90466.042641] (3)[1316:vdec_log_info]Restarting tasks ...
<6>[90466.050937] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90466.051390] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90466.053651] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90466.064012] done.
<5>[90466.064045] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90466.064056] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90466.070142] (2)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90466.070917] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10194065,13953,20452scp1 sleep state: 54840,23420,23420
<6>[90466.070940] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90466.070940]
<5>[90466.070954] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90466.070964] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90466.070982] -(1)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90466.070996] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90466.072016] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90466.072234] -(4)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90466.072694] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90466.072730] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:46:17.349247032 UTC
<6>[90466.072937] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90466.073010] (1)[7386:kworker/1:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90466.073021] (1)[7386:kworker/1:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90466.073037] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90466.073050] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90466.073073] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<36>[90466.073133] (0)[576:logd.auditd]type=1400 audit(1671083177.344:1623206):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90466.074037] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90466.103966] -(0)[7358:MqttClient-Netw][ccci1/dpmaif]tx0_resume_tx: 0xc0000,
0x40000, 0x0
<6>[90466.104359] -(5)[3955:Binder:3943_1][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x40000, 0x0
<3>[90466.119978] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90466.138258] -(1)[7763:MqttClient-Netw][ccci1/dpmaif]tx1_resume_tx: 0x40000,
0x40000, 0x0
<6>[90466.139510] -(2)[0:swapper/2][ccci1/dpmaif]clear txq1_resume_done: 0x40000,
0x40000, 0x0
<6>[90466.175086] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90466.175113] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90466.175150] (1)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90466.225885] (3)[30078:kworker/3:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90466.277039] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<6>[90466.296861] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90466.329697] (3)[30078:kworker/3:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90466.381896] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:333
<6>[90466.382146] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90466.382235] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<12>[90466.390161] (6)[853:[email protected]]healthd: battery l=59 v=3936 t=34.4 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90466.390203] (6)[853:[email protected]]healthd: battery l=59 v=3936 t=34.4 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90466.395053] (6)[853:[email protected]]healthd: battery l=59 v=3936 t=34.4 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90466.516820] (2)[853:[email protected]]healthd: battery l=59 v=3936 t=34.4 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90466.516895] (2)[853:[email protected]]healthd: battery l=59 v=3936 t=34.4 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<12>[90466.523442] (2)[853:[email protected]]healthd: battery l=59 v=3936 t=34.4 h=2
st=3 c=15 fc=4110000 cc=670 chg=
<5>[90466.782880] -(2)[0:swapper/2]lvts_paused = 1
<5>[90467.007695] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90467.007777] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90467.007828] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90467.007870] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90467.101843] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90467.128106] -(3)[0:swapper/3][bq27z561] fg_update_status:
SOC:59,Volt:3931,Cur:186,Temp:344,RM:2232,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90467.141310] -(3)[0:swapper/3]lvts_paused = 1
<6>[90467.305723] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90467.902404] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90467.902447] (0)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90467.902663] (0)[7383:kworker/u16:6]PM: ++
<7>[90467.911859] (0)[7383:kworker/u16:6]PM: --
<4>[90468.009731] done.
<6>[90468.015320] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10194155,13971,20479scp1 sleep state: 54842,23420,23420
<6>[90468.015353] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90468.015353]
<6>[90468.015378] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90468.015378]
<6>[90468.015400] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90468.015400]
<6>[90468.015422] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90468.015422]
<5>[90468.015444] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90468.015462] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90468.015496] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90468.015525] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90468.015876] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90468.015909] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:46:19.292436494 UTC
<6>[90468.016090] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90468.016147] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00005355],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90468.016174] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90468.016196] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90468.016346] (2)[576:logd.auditd]type=1400 audit(1671083179.288:1623207):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90468.017493] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90468.019399] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90468.019429] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90468.043837] (elapsed 0.027 seconds) done.
<6>[90468.043875] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90468.043894] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90468.099497] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:333
<3>[90468.099548] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90468.099615] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90468.101005] (0)[6931:kworker/u16:8]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90468.101348] (0)[7383:kworker/u16:6]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90468.101794] (0)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90468.101890] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90468.102001] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90468.102033] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90468.102863] (0)[6931:kworker/u16:8][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90468.103893] (0)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<3>[90468.103967] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90468.104018] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<6>[90468.104671] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90468.104694] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90468.104722] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90468.105454] (0)[10823:Binder:636_2]alarmtimer_suspend convert
217973891000000 to 2022/12/15 05:47:28 (now = 2022/12/15 05:46:19)
<5>[90468.105722] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:47:29 (1)
<5>[90468.109180] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90468.109654] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.109694] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90468.109705] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.109814] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90468.109855] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.109902] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90468.109902]
<6>[90468.109925] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90468.109925]
<6>[90468.109947] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90468.109947]
<6>[90468.109968] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90468.109968]
<6>[90468.110082] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90468.110122] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90468.110145] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90468.110741] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90468.110824] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90468.111047] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90468.111389] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90468.111410] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90468.111835] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90468.111854] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90468.112322] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90468.112625] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,785 us
<6>[90468.113427] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90468.113760] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90468.113886] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90468.114274] (0)[10823:Binder:636_2]suspend of devices complete after 55.843
msecs
<6>[90468.119814] (0)[10823:Binder:636_2]late suspend of devices complete after
5.511 msecs
<4>[90468.119841] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90468.124714]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90468.125424] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90468.126015] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90468.126642] (3)[10823:Binder:636_2]noirq suspend of devices complete after
6.108 msecs
<6>[90468.126726] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90468.126726] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90468.126726] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90468.126803] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90468.126803] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90468.126803] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90468.126803] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90468.126803] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90468.126803] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 1638929, r13 = 0xc40019ac, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767f9, req_sta = 0x1c000ff 0x180000
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xb9b04200, wlk_cntcv_h = 0x293, 26M_off_pct =
75
<6>[90468.126803] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x10
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 50.016 seconds
<4>[90468.126803] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90468.126803] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90468.126803] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90468.126803] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90468.126803] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90468.126803] -(3)[0:swapper/3]Call trace:
<4>[90468.126803] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90468.126803] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90468.126803] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90468.126803] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90468.126803] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90468.126803] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90468.126803] -(3)[0:swapper/3] mt6885_show_message+0xbd0/0xe28
<4>[90468.126803] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90468.126803] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90468.126803] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90468.126803] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90468.126803] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90468.126803] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90468.126803] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90468.126803] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90468.126803] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90468.126803] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90468.126803] -(3)[0:swapper/3]---[ end trace 308173880bd0bf94 ]---
<4>[90468.126803] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90468.126803] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90468.126803] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90468.126803] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90468.126803] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90468.126803] -(3)[0:swapper/3]Call trace:
<4>[90468.126803] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90468.126803] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90468.126803] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90468.126803] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90468.126803] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90468.126803] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90468.126803] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90468.126803] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90468.126803] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90468.126803] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90468.126803] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90468.126803] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90468.126803] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90468.126803] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90468.126803] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90468.126803] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90468.126803] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90468.126803] -(3)[0:swapper/3]---[ end trace 308173880bd0bf95 ]---
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 1234391 (32k)
<4>[90468.126803] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 37.670/45.408/50.139/40.688/50.187 seconds
<6>[90468.126803] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90468.126929] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x180000, 0x140000, 0x0)
<6>[90468.126973] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90468.126939] -(3)[0:swapper/3]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90468.128992] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90468.130101]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90468.130251] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90468.132220] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90468.137814] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.965 msecs
<6>[90468.138104] (2)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(99)
<6>[90468.138315] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] ccci_fs
<4>[90468.138337] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90468.143443] (3)[10823:Binder:636_2]early resume of devices complete after
5.056 msecs
<5>[90468.144164] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90468.146032] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90468.146355] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90468.146392] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1423 us
<5>[90468.147124] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90468.147519] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90468.147546] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90468.147623] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90468.147655] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90468.147738] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90468.147924] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90468.147979] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90468.148001] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90468.148082] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.148123] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90468.148242] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.148266] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90468.148279] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90468.148433] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90468.150253] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90468.151265] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.151357] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90468.151638] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90468.151671] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90468.152376] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.152519] (0)[25356:kworker/0:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90468.154565] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.154872] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.155174] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.155922] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90468.156463] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90468.158830] (2)[10823:Binder:636_2]resume of devices complete after 15.355
msecs
<3>[90468.162956] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90468.162982] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90468.163603] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90468.163624] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90468.163802] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90468.163820] (3)[1316:vdec_log_info]Restarting tasks ...
<6>[90468.171155] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90468.171268] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90468.172027] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90468.172443] -(0)[1893:AlarmManager]alarmtimer_enqueue: 1 callbacks suppressed
<5>[90468.172455] -(0)[1893:AlarmManager]alarmtimer_enqueue, 217973891000000
<12>[90468.181055] (1)[853:[email protected]]healthd: battery l=59 v=3937 t=34.4 h=2
st=3 c=48 fc=4110000 cc=670 chg=
<12>[90468.181134] (1)[853:[email protected]]healthd: battery l=59 v=3937 t=34.4 h=2
st=3 c=48 fc=4110000 cc=670 chg=
<4>[90468.183711] done.
<5>[90468.183740] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90468.183757] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90468.187726] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<12>[90468.188381] (1)[853:[email protected]]healthd: battery l=59 v=3937 t=34.4 h=2
st=3 c=48 fc=4110000 cc=670 chg=
<6>[90468.189737] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10196353,14515,21045scp1 sleep state: 54844,23426,23426
<6>[90468.189761] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90468.189761]
<5>[90468.189778] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90468.189790] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90468.189811] -(2)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90468.189825] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90468.190831] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90468.191123] -(5)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90468.191503] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90468.191541] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:47:09.488400188 UTC
<6>[90468.191726] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90468.191806] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90468.191821] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90468.191835] (0)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90468.192063] (0)[576:logd.auditd]type=1400 audit(1671083229.483:1623208):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90468.192277] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90468.192298] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90468.194296] (2)[10823:Binder:636_2]PM: suspend exit
<12>[90468.195582] (4)[853:[email protected]]healthd: battery l=59 v=3937 t=34.4 h=2
st=3 c=48 fc=4110000 cc=670 chg=
<4>[90468.232419] -(6)[853:[email protected]]CPU6: update max cpu_capacity 864
<3>[90468.240758] (0)[30807:kworker/0:5]typec_cc_orientation = 2
<6>[90468.295815] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90468.295862] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90468.295911] (2)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90468.295924] (2)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90468.314363] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90468.344771] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<4>[90468.349807] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 472,
595, 553, 536, 293, 138, 122, 68, success counter cpu: 115, 90, 84, 160, 43, 10,
19, 7, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 194, 173,
138, 227, 77, 23, 24, 10, o: 1-2,4-7, p: , f: , t: 90468480000000, 90468480000000,
90468505520235, 90468485726310, 90468480000000, 90468924000000, 90469148000000,
90468700000000,
<3>[90468.401725] (0)[30807:kworker/0:5]chg_type = 0, hvdcp_type = 0
<6>[90468.456202] (0)[25356:kworker/0:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90468.503948] (0)[30807:kworker/0:5]get_connector_temp: connector_temp:335
<6>[90468.504049] (0)[30807:kworker/0:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90468.504121] (0)[30807:kworker/0:5]mt_charger_plugin plugin:0
<6>[90468.734009] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90468.734052] (2)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90468.734180] (2)[19178:kworker/u16:2]PM: ++
<7>[90468.744861] (2)[19178:kworker/u16:2]PM: --
<4>[90468.841913] done.
<5>[90468.847726] -(2)[0:swapper/2]lvts_paused = 1
<5>[90468.847810] -(2)[0:swapper/2]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90468.851745] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10196385,14528,21068scp1 sleep state: 54845,23427,23427
<6>[90468.851804] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90468.851804]
<6>[90468.851829] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90468.851829]
<6>[90468.851852] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90468.851852]
<6>[90468.851874] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90468.851874]
<5>[90468.851897] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90468.851915] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90468.851956] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90468.851986] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90468.852341] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90468.852377] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:47:10.149245111 UTC
<6>[90468.852601] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90468.852658] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90468.852686] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90468.852712] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90468.852943] (0)[576:logd.auditd]type=1400 audit(1671083230.143:1623209):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90468.854368] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90468.855757] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90468.855786] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90468.880302] (elapsed 0.027 seconds) done.
<6>[90468.880336] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90468.880357] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90468.934667] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:334
<3>[90468.934716] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90468.934782] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90468.936125] (2)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90468.936586] (2)[23436:kworker/u16:0]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90468.936989] (2)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90468.937338] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90468.937531] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90468.937566] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90468.938557] (2)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90468.938619] (2)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90468.938667] (2)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90468.938792] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90468.940147] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90468.940184] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90468.940212] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90468.940947] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217973891000000 to 2022/12/15 05:47:27 (now = 2022/12/15 05:47:09)
<5>[90468.941066] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:47:28 (1)
<5>[90468.944525] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90468.945058] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.945096] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90468.945108] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.945217] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90468.945259] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.945305] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90468.945305]
<6>[90468.945327] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90468.945327]
<6>[90468.945349] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90468.945349]
<6>[90468.945370] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90468.945370]
<6>[90468.945550] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90468.945589] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90468.945616] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90468.946223] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90468.946305] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90468.946529] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90468.946879] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90468.946900] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90468.947316] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90468.947335] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90468.947776] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90468.948117] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,795 us
<6>[90468.949056] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90468.949331] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90468.949521] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90468.949931] (2)[10823:Binder:636_2]suspend of devices complete after 55.051
msecs
<6>[90468.956773] (2)[10823:Binder:636_2]late suspend of devices complete after
6.812 msecs
<4>[90468.956800] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90468.962775]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90468.963435] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90468.963811] (2)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90468.964607] (2)[10823:Binder:636_2]noirq suspend of devices complete after
6.882 msecs
<6>[90468.964681] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90468.964681] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90468.964681] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90468.964758] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90468.964758] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90468.964758] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90468.964758] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90468.964758] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90468.964758] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 16941, r13 = 0xc40019ac, debug_flag = 0xf8040300
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xbabdb2cf, wlk_cntcv_h = 0x293, 26M_off_pct = 0
<6>[90468.964758] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x10
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 0.516 seconds
<4>[90468.964758] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90468.964758] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90468.964758] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90468.964758] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90468.964758] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90468.964758] -(2)[0:swapper/2]Call trace:
<4>[90468.964758] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90468.964758] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90468.964758] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90468.964758] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90468.964758] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90468.964758] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90468.964758] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90468.964758] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90468.964758] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90468.964758] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90468.964758] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90468.964758] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90468.964758] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90468.964758] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90468.964758] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90468.964758] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90468.964758] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90468.964758] -(2)[0:swapper/2]---[ end trace 308173880bd0bf96 ]---
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90468.964758] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/0.000/0.000/0.000/0.000 seconds
<6>[90468.964758] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90468.964870] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90468.964892] -(2)[0:swapper/2]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90468.967638] (2)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90468.968564]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90468.968592] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90468.970838] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90468.976281] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.363 msecs
<6>[90468.976586] (3)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(100)
<6>[90468.976773] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90468.976795] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90468.981984] (1)[10823:Binder:636_2]early resume of devices complete after
5.135 msecs
<5>[90468.982415] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90468.985363] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90468.985742] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90468.985779] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2560 us
<5>[90468.986045] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90468.986719] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90468.986747] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90468.986822] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90468.986854] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90468.986936] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90468.987122] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90468.987179] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90468.987202] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90468.987283] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.987323] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90468.987440] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90468.987465] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90468.987478] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90468.987619] (1)[10823:Binder:636_2]zcvf, no update time:1 96 avgc:0
avgc_thread
<5>[90468.987646] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90468.991130] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90468.992152] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.992244] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90468.992529] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90468.992563] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90468.993238] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.993335] (3)[25513:kworker/3:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90468.994309] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.994569] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.994821] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90468.995475] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90468.996102] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90469.000978] (2)[10823:Binder:636_2]resume of devices complete after 18.961
msecs
<3>[90469.004914] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90469.004940] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90469.005579] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90469.005601] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90469.005726] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90469.005752] (3)[1038:mi_thermald]Restarting tasks ...
<5>[90469.008038] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90469.008110] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90469.008156] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90469.008201] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90469.011439] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90469.011847] (1)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90469.011877] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90469.011982] -(2)[1893:AlarmManager]alarmtimer_enqueue, 217973891000000
<4>[90469.021265] done.
<5>[90469.021284] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90469.021292] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90469.025839] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90469.026856] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10196422,14538,21101scp1 sleep state: 54847,23427,23427
<6>[90469.026891] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90469.026891]
<5>[90469.026903] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90469.026912] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90469.026929] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90469.026940] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90469.027840] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90469.028298] -(4)[404:EEM_CTRL_B][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90469.028482] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90469.028518] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:47:10.845159263 UTC
<6>[90469.028734] (1)[7386:kworker/1:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:0><0x1cda>
<6>[90469.028793] (1)[7386:kworker/1:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90469.028802] (1)[7386:kworker/1:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90469.029354] (3)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90469.029390] (3)[576:logd.auditd]type=1400 audit(1671083230.841:1623210):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90469.030926] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90469.030948] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90469.030959] (1)[10823:Binder:636_2]PM: suspend exit
<3>[90469.080382] (3)[23446:kworker/3:1]typec_cc_orientation = 2
<6>[90469.132201] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90469.132247] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90469.132289] (2)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90469.188737] (3)[25513:kworker/3:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90469.213519] (2)[296:hang_detect][Hang_Detect] hang_detect thread counts down
10:10, status 1.
<3>[90469.240884] (3)[23446:kworker/3:1]chg_type = 0, hvdcp_type = 0
<6>[90469.292781] (3)[25513:kworker/3:4]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90469.323478] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90469.343765] (3)[23446:kworker/3:1]get_connector_temp: connector_temp:335
<6>[90469.344051] (3)[23446:kworker/3:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90469.344155] (3)[23446:kworker/3:1]mt_charger_plugin plugin:0
<6>[90469.537564] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_CCIF0_EVENT_B, timer_out = 16941, r13 = 0xc40019ac, debug_flag = 0xf8040300
0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 = 0x100,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff
0x0 0x50000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90469.537670] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90469.598115] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90469.598163] (0)[23443:kworker/u16:5]PM: Syncing filesystems ...
<7>[90469.598408] (0)[23443:kworker/u16:5]PM: ++
<7>[90469.606318] (0)[23443:kworker/u16:5]PM: --
<4>[90469.705784] done.
<6>[90469.712967] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10196454,14548,21121scp1 sleep state: 54849,23427,23427
<6>[90469.713019] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90469.713019]
<6>[90469.713043] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90469.713043]
<6>[90469.713066] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90469.713066]
<6>[90469.713088] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90469.713088]
<5>[90469.713110] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90469.713128] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90469.713163] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90469.713192] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90469.713640] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90469.713674] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:47:11.530325802 UTC
<6>[90469.713856] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90469.713914] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90469.713941] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90469.713965] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90469.714043] (3)[576:logd.auditd]type=1400 audit(1671083231.525:1623211):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90469.715250] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90469.716993] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90469.717020] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90469.741228] (elapsed 0.027 seconds) done.
<6>[90469.741264] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90469.741283] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.012 seconds) done.
<3>[90469.798096] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:335
<3>[90469.798151] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90469.798230] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90469.799744] (1)[23438:kworker/u16:4]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90469.799925] (0)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90469.800090] (2)[23436:kworker/u16:0]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90469.800508] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90469.800634] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90469.800668] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90469.801555] (1)[23438:kworker/u16:4][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90469.802247] (1)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<3>[90469.802281] (2)[23436:kworker/u16:0]ghr: scsi_execute exit ret = 0x0
<3>[90469.802299] (0)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90469.803584] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90469.803612] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90469.803644] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90469.804479] (2)[10823:Binder:636_2]alarmtimer_suspend convert
217973891000000 to 2022/12/15 05:47:28 (now = 2022/12/15 05:47:11)
<5>[90469.804597] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:47:29 (1)
<5>[90469.807635] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90469.808095] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90469.808135] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90469.808147] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90469.808266] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90469.808312] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90469.808362] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90469.808362]
<6>[90469.808384] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90469.808384]
<6>[90469.808407] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90469.808407]
<6>[90469.808429] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90469.808429]
<6>[90469.808553] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90469.808597] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90469.808622] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90469.809332] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90469.809487] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90469.809729] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90469.810110] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90469.810132] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90469.810604] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90469.810623] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90469.811114] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90469.811459] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,849 us
<6>[90469.812491] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90469.812791] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90469.812931] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90469.813372] (2)[10823:Binder:636_2]suspend of devices complete after 55.505
msecs
<6>[90469.820643] (2)[10823:Binder:636_2]late suspend of devices complete after
7.240 msecs
<4>[90469.820671] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90469.826716]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90469.827343] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90469.827726] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90469.828508] (2)[10823:Binder:636_2]noirq suspend of devices complete after
6.856 msecs
<6>[90469.828578] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90469.828578] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90469.828578] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90469.828655] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90469.828655] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90469.828655] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90469.828655] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90469.828655] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90469.828655] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 577602, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24747ff, req_sta = 0x3c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xc9125fc7, wlk_cntcv_h = 0x293, 26M_off_pct =
93
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 17.627 seconds
<4>[90469.828655] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90469.828655] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90469.828655] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90469.828655] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90469.828655] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90469.828655] -(2)[0:swapper/2]Call trace:
<4>[90469.828655] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90469.828655] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90469.828655] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90469.828655] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90469.828655] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90469.828655] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90469.828655] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90469.828655] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90469.828655] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90469.828655] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90469.828655] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90469.828655] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90469.828655] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90469.828655] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90469.828655] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90469.828655] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90469.828655] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90469.828655] -(2)[0:swapper/2]---[ end trace 308173880bd0bf97 ]---
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 514500 (32k)
<4>[90469.828655] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 15.701/16.728/16.728/15.917/16.6728 seconds
<6>[90469.828655] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90469.828655] -(2)[0:swapper/2]EINT 222 is pending
<6>[90469.828800] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x180000, 0x140000, 0x0)
<6>[90469.828846] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90469.828816] -(2)[0:swapper/2]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90469.831351] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_resume
<5>[90469.832437]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90469.832611] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90469.834644] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90469.840529] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.706 msecs
<6>[90469.840778] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90469.840894] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90469.840990] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90469.841036] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90469.841069] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90469.841109] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90469.846628] (2)[10823:Binder:636_2]early resume of devices complete after
5.459 msecs
<5>[90469.847354] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90469.849493] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90469.849886] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90469.849927] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1692 us
<5>[90469.850647] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90469.851037] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90469.851063] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90469.851144] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90469.851178] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90469.851266] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90469.851470] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90469.851531] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90469.851554] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90469.851637] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90469.851679] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90469.851807] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90469.851833] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90469.851848] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90469.851996] (1)[10823:Binder:636_2]zcvf, no update time:19 96 avgc:0
avgc_thread
<5>[90469.852024] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90469.855525] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90469.856600] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90469.856695] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90469.857003] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90469.857037] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90469.857883] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90469.858049] (0)[7416:kworker/0:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90469.860289] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90469.860796] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90469.861676] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90469.861783] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90469.861880] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90469.865550] (1)[10823:Binder:636_2]resume of devices complete after 18.888
msecs
<3>[90469.871571] (1)[7386:kworker/1:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90469.871601] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90469.872370] (1)[7386:kworker/1:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90469.872395] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90469.872611] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90469.872643] (4)[1314:receiver]Restarting tasks ...
<6>[90469.880785] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90469.881043] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90469.881120] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90469.887832] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218001022000000
<4>[90469.894946] done.
<5>[90469.894978] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90469.894987] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90469.898744] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90469.903156] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10197250,14752,21349scp1 sleep state: 54851,23427,23427
<6>[90469.903181] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90469.903181]
<5>[90469.903194] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90469.903205] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90469.903224] -(2)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90469.903236] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90469.904159] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90469.904430] -(4)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90469.904899] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90469.904934] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:47:29.352482033 UTC
<6>[90469.905108] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90469.905183] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90469.905194] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<36>[90469.905203] (3)[576:logd.auditd]type=1400 audit(1671083249.348:1623212):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90469.905221] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90469.905247] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90469.905270] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90469.905283] (2)[10823:Binder:636_2]PM: suspend exit
<5>[90469.921879] -(3)[1893:AlarmManager]alarmtimer_enqueue, 218001022000000
<5>[90469.946751] -(5)[4944:Binder:1454_13]alarmtimer_enqueue, 218001022000000
<3>[90469.948005] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90470.006691] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90470.006739] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90470.057011] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90470.106470] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<3>[90470.160446] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:335
<6>[90470.160917] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90470.161367] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<4>[90470.177856] -(6)[2153:HwBinder:1454_2]CPU6: update max cpu_capacity 826
<6>[90470.210044] (3)[23446:kworker/3:1]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90470.331727] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90470.332324] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90470.332356] (2)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90470.332477] (2)[7405:kworker/u16:10]PM: ++
<7>[90470.343982] (2)[7405:kworker/u16:10]PM: --
<4>[90470.441345] done.
<6>[90470.447408] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10197273,14759,21365scp1 sleep state: 54853,23427,23427
<6>[90470.447441] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90470.447441]
<6>[90470.447466] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90470.447466]
<6>[90470.447489] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90470.447489]
<6>[90470.447512] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90470.447512]
<5>[90470.447534] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90470.447552] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90470.447594] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90470.447624] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90470.447958] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90470.447993] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:47:29.895548802 UTC
<6>[90470.448195] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90470.448253] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90470.448281] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90470.448305] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90470.448511] (0)[576:logd.auditd]type=1400 audit(1671083249.892:1623213):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90470.449929] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90470.451257] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90470.451282] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90470.477900] (elapsed 0.029 seconds) done.
<6>[90470.477940] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90470.477960] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.012 seconds) done.
<6>[90470.495158] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: NETLINK
<6>[90470.495198] (2)[10823:Binder:636_2]suspend of devices aborted after 0.406
msecs
<3>[90470.495216] (2)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<6>[90470.495246] (2)[10823:Binder:636_2]resume of devices complete after 0.007
msecs
<3>[90470.501921] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90470.501952] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90470.502705] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90470.502730] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90470.502946] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90470.502968] (5)[1315:receiver]Restarting tasks ...
<6>[90470.510371] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90470.510574] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90470.510984] (0)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90470.525997] done.
<5>[90470.526043] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90470.526065] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90470.530258] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90470.531145] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10197279,14765,21383scp1 sleep state: 54855,23427,23427
<6>[90470.531173] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90470.531173]
<5>[90470.531194] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90470.531210] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90470.531235] -(2)[10823:Binder:636_2]Abort: Pending Wakeup Sources: NETLINK
<5>[90470.531253] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90470.532388] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90470.533291] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90470.533341] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:47:29.980880802 UTC
<36>[90470.533657] (3)[576:logd.auditd]type=1400 audit(1671083249.976:1623214):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90470.533705] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90470.533811] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90470.533827] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90470.533844] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90470.533901] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90470.533935] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90470.533957] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90470.736937] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90470.736987] (2)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90470.737164] (2)[7405:kworker/u16:10]PM: ++
<7>[90470.744542] (2)[7405:kworker/u16:10]PM: --
<4>[90470.845106] done.
<6>[90470.854522] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10197294,14769,21397scp1 sleep state: 54857,23427,23427
<6>[90470.854580] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90470.854580]
<6>[90470.854605] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90470.854605]
<6>[90470.854628] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90470.854628]
<6>[90470.854651] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90470.854651]
<5>[90470.854674] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90470.854692] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90470.854726] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90470.854756] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90470.855098] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90470.855133] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:47:30.302688802 UTC
<6>[90470.855350] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90470.855408] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90470.855435] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90470.855461] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90470.855706] (3)[576:logd.auditd]type=1400 audit(1671083250.300:1623215):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90470.856903] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<4>[90470.885111] (elapsed 0.029 seconds) done.
<6>[90470.885181] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90470.885202] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90470.945220] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:335
<3>[90470.945276] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90470.945356] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90470.946967] (2)[7405:kworker/u16:10]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90470.947587] (0)[19178:kworker/u16:2]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<3>[90470.948003] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90470.948132] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90470.948171] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<5>[90470.949154] (3)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90470.949166] (2)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90470.949183] (0)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90470.949475] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90470.967390] (0)[30822:kworker/0:7][bq27z561] fg_update_status:
SOC:59,Volt:3934,Cur:73,Temp:346,RM:2231,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90470.967536] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90470.968612] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90470.968891] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: bms battery
<6>[90470.968927] (2)[10823:Binder:636_2]suspend of devices aborted after 66.627
msecs
<3>[90470.968946] (2)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<6>[90470.968985] (0)[30807:kworker/0:5]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<3>[90470.969751] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90470.969775] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<6>[90470.970551] (3)[118:pd_dbg_info]///PD dbg info 128d
<5>[90470.970577] (3)[118:pd_dbg_info]<90470.970>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90470.970577] <90470.970>TCPC-TCPC:bat_update_work_func Battery Discharging
<3>[90470.970854] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90470.970986] (2)[23427:kworker/2:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90470.971962] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90470.972317] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90470.972420] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90470.972722] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90470.973380] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90470.979843] (2)[10823:Binder:636_2]resume of devices complete after 10.870
msecs
<3>[90470.986483] (2)[30082:kworker/2:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90470.986511] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90470.987213] (2)[30082:kworker/2:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90470.987237] (2)[30082:kworker/2:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90470.987445] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90470.987476] (5)[1315:receiver]Restarting tasks ...
<6>[90470.997059] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90470.997551] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90470.998109] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90471.008404] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90471.008483] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90471.008529] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90471.008561] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90471.008963] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<4>[90471.009530] -(5)[398:ipi_cpu_dvfs_rt]CPU5: update max cpu_capacity 864
<4>[90471.011635] done.
<5>[90471.011829] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90471.011847] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90471.017810] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90471.024321] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10197305,14775,21421scp1 sleep state: 54859,23427,23427
<6>[90471.024358] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90471.024358]
<5>[90471.024379] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90471.024395] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90471.024420] -(2)[10823:Binder:636_2]Abort: Pending Wakeup Sources: bms
battery
<5>[90471.024439] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90471.025497] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90471.026419] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90471.026471] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:47:30.474010340 UTC
<6>[90471.026696] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90471.026816] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90471.026834] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90471.026879] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90471.026903] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90471.026915] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90471.026946] (2)[10823:Binder:636_2]PM: suspend exit
<36>[90471.028266] (3)[576:logd.auditd]type=1400 audit(1671083250.472:1623216):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<3>[90471.058675] (2)[7519:kworker/2:4]typec_cc_orientation = 2
<3>[90471.168806] (2)[7519:kworker/2:4]chg_type = 0, hvdcp_type = 0
<6>[90471.218355] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90471.269915] (2)[7519:kworker/2:4]get_connector_temp: connector_temp:335
<6>[90471.270169] (2)[7519:kworker/2:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90471.270419] (2)[7519:kworker/2:4]mt_charger_plugin plugin:0
<6>[90471.321270] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90471.341095] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90471.428995] (2)[10823:Binder:636_2]active wakeup source: main
<12>[90471.436430] (0)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=73 fc=4110000 cc=670 chg=
<12>[90471.436499] (0)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=73 fc=4110000 cc=670 chg=
<12>[90471.442408] (0)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=73 fc=4110000 cc=670 chg=
<6>[90471.443092] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90471.443119] (3)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90471.443327] (3)[23444:kworker/u16:7]PM: ++
<7>[90471.452451] (3)[23444:kworker/u16:7]PM: --
<5>[90471.521064] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<4>[90471.553133] done.
<6>[90471.562446] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10197332,14785,21443scp1 sleep state: 54861,23427,23427
<6>[90471.562505] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90471.562505]
<6>[90471.562529] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90471.562529]
<6>[90471.562552] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90471.562552]
<6>[90471.562574] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90471.562574]
<5>[90471.562596] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90471.562614] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90471.562649] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90471.562679] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90471.563025] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90471.563060] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:47:31.010615956 UTC
<6>[90471.563287] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90471.563349] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90471.563376] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90471.563402] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90471.563598] (3)[576:logd.auditd]type=1400 audit(1671083251.008:1623217):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90471.564842] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90471.566797] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90471.566825] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90471.593277] (elapsed 0.029 seconds) done.
<6>[90471.593313] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90471.593333] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90471.654798] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:335
<3>[90471.654854] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90471.654931] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90471.656395] (3)[23444:kworker/u16:7]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90471.656876] (3)[23443:kworker/u16:5]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<3>[90471.657546] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90471.657670] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90471.657706] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<5>[90471.658568] (2)[25368:kworker/u16:9]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90471.658636] (3)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90471.658770] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<3>[90471.658808] (2)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90471.658837] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90471.660480] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90471.660518] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90471.660549] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90471.661397] (3)[10823:Binder:636_2]alarmtimer_suspend convert
218001022000000 to 2022/12/15 05:47:54 (now = 2022/12/15 05:47:30)
<5>[90471.661667] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:47:55 (1)
<5>[90471.665139] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90471.665713] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90471.665754] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90471.665767] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90471.665887] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90471.665934] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90471.665981] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90471.665981]
<6>[90471.666004] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90471.666004]
<6>[90471.666026] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90471.666026]
<6>[90471.666049] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90471.666049]
<6>[90471.666170] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90471.666214] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90471.666238] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90471.666917] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90471.667004] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90471.667240] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90471.667616] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90471.667639] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90471.668101] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90471.668120] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90471.668562] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90471.668900] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,794 us
<6>[90471.670004] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90471.670304] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90471.670437] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90471.670874] (3)[10823:Binder:636_2]suspend of devices complete after 60.474
msecs
<6>[90471.678340] (3)[10823:Binder:636_2]late suspend of devices complete after
7.434 msecs
<4>[90471.678370] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90471.684389]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90471.685049] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90471.685493] (3)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90471.686313] (3)[10823:Binder:636_2]noirq suspend of devices complete after
7.182 msecs
<6>[90471.686385] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90471.686385] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90471.686385] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90471.686474] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90471.686474] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90471.686474] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 790971, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24747ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xdd37d844, wlk_cntcv_h = 0x293, 26M_off_pct =
92
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 24.138 seconds
<4>[90471.686474] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90471.686474] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90471.686474] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90471.686474] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90471.686474] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90471.686474] -(3)[0:swapper/3]Call trace:
<4>[90471.686474] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90471.686474] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90471.686474] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90471.686474] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90471.686474] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90471.686474] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90471.686474] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90471.686474] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90471.686474] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90471.686474] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90471.686474] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90471.686474] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90471.686474] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90471.686474] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90471.686474] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90471.686474] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90471.686474] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90471.686474] -(3)[0:swapper/3]---[ end trace 308173880bd0bf98 ]---
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 741662 (32k)
<4>[90471.686474] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 22.633/24.321/24.321/23.046/24.4321 seconds
<6>[90471.686474] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90471.686474] -(3)[0:swapper/3]EINT 222 is pending
<6>[90471.686620] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x180000, 0x140000, 0x0)
<6>[90471.686665] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90471.686634] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90471.689813] (3)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90471.690692]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90471.690721] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90471.692803] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90471.698662] (0)[10823:Binder:636_2]noirq resume of devices complete after
11.086 msecs
<6>[90471.698921] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90471.699062] -(1)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90471.699146] -(1)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90471.699186] (1)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90471.699328] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90471.699354] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90471.704353] (0)[10823:Binder:636_2]early resume of devices complete after
4.936 msecs
<5>[90471.704806] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90471.707003] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90471.707365] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90471.707406] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1658 us
<5>[90471.707682] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90471.708329] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90471.708357] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90471.708439] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90471.708472] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90471.708561] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90471.708757] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90471.708819] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90471.708841] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90471.708923] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90471.708965] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90471.709089] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90471.709114] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90471.709127] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90471.709271] (0)[10823:Binder:636_2]zcvf, no update time:45 96 avgc:0
avgc_thread
<5>[90471.709299] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90471.712611] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90471.713798] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90471.713893] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90471.714215] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90471.714362] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90471.714914] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90471.714998] (1)[25366:kworker/1:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90471.715981] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90471.716105] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90471.716317] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90471.716560] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90471.717333] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90471.720398] (3)[10823:Binder:636_2]resume of devices complete after 16.011
msecs
<6>[90471.725711] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90471.725735] (3)[23446:kworker/3:1]Restarting tasks ...
<3>[90471.726142] (3)[23446:kworker/3:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90471.726178] (3)[23446:kworker/3:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90471.726911] (3)[23446:kworker/3:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90471.726932] (3)[23446:kworker/3:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90471.734122] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90471.734174] (7)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90471.734238] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90471.736012] -(7)[1893:AlarmManager]alarmtimer_enqueue, 218005397000000
<5>[90471.736498] -(7)[1893:AlarmManager]alarmtimer_enqueue, 218005397000000
<12>[90471.744523] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90471.744622] (3)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<4>[90471.745107] done.
<5>[90471.745134] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90471.745146] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90471.748378] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90471.748990] (6)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10198405,15061,21737scp1 sleep state: 54863,23427,23427
<6>[90471.749020] (6)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90471.749020]
<5>[90471.749041] (6)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90471.749057] (6)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90471.749080] -(6)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90471.749095] (6)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90471.749759] -(1)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90471.750151] (6)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<12>[90471.750194] (5)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<5>[90471.750862] (6)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90471.750901] (6)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:47:55.340624264 UTC
<6>[90471.751047] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90471.751173] (6)[30505:kworker/6:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90471.751183] (6)[30505:kworker/6:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90471.751203] (6)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90471.751218] (6)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90471.751254] (0)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90471.751729] (0)[576:logd.auditd]type=1400 audit(1671083275.336:1623218):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90471.752327] (5)[10823:Binder:636_2]PM: suspend exit
<12>[90471.764083] (1)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90471.764148] (1)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<6>[90471.773483] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10236,
dram:0%, syspll:0%, bus26m:31%
<6>[90471.773631] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90471.773655] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90471.773666] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90471.773681] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90471.773690] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90471.773704] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33824,33868576,5520), tx=(13577,2351,11226), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90471.773787] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<3>[90471.787593] (2)[857:[email protected]][mtk_nanohub]sensor_id id 16,
sensor_type:17
<5>[90471.791514] -(5)[1893:AlarmManager]alarmtimer_enqueue, 218005397000000
<3>[90471.805359] (1)[7388:kworker/1:3]typec_cc_orientation = 2
<12>[90471.809731] (4)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<12>[90471.814571] (4)[853:[email protected]]healthd: battery l=59 v=3934 t=34.6 h=2
st=3 c=22 fc=4110000 cc=670 chg=
<5>[90471.830853] -(6)[4944:Binder:1454_13]alarmtimer_enqueue, 218005397000000
<4>[90471.840851] -(4)[3752:main_thread]asicConnac2xFillCmdTxdInfo: 3 callbacks
suppressed
<5>[90471.843876] -(4)[3662:WifiScanningSer]alarmtimer_enqueue, 218005397000000
<6>[90471.853251] (3)[10823:Binder:636_2]active wakeup source: WLAN timeout
<6>[90471.853312] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90471.853326] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90471.853369] (3)[10823:Binder:636_2]active wakeup source: ttyC0
<3>[90471.911026] (1)[7388:kworker/1:3]chg_type = 0, hvdcp_type = 0
<3>[90471.961777] (1)[7388:kworker/1:3]get_connector_temp: connector_temp:335
<6>[90471.961846] (1)[7388:kworker/1:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90471.961917] (1)[7388:kworker/1:3]mt_charger_plugin plugin:0
<6>[90472.012464] (1)[7390:kworker/1:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90472.093992] (1)[7390:kworker/1:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90472.353708] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90472.766298] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90472.832930] -(0)[0:swapper/0][bq27z561] fg_update_status:
SOC:59,Volt:3934,Cur:117,Temp:346,RM:2231,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90472.906767] -(0)[0:swapper/0]lvts_paused = 1
<5>[90472.906861] -(0)[0:swapper/0]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<5>[90473.011860] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90473.011959] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90473.012011] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90473.012153] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90473.227651] -(1)[3662:WifiScanningSer]alarmtimer_enqueue, 218005397000000
<6>[90473.335279] -(5)[7715:lowpool[177]][ccci1/dpmaif]tx1_resume_tx: 0x180000,
0x140000, 0x0
<6>[90473.335361] -(5)[7715:lowpool[177]][ccci1/dpmaif]wake up by MD0 HIF
L2(10800/0)(3e0/0)!
<6>[90473.337605] -(3)[0:swapper/3][ccci1/dpmaif]wake up by MD0 HIF L2(42/0)
(3e0/0)!
<6>[90473.337651] -(3)[0:swapper/3][ccci1/dpmaif]clear txq1_resume_done: 0x180000,
0x40000, 0x0
<6>[90473.338412] (2)[1319:dpmaif_txq1_don][ccci1/dpmaif]DPMA_MD wakeup source:
(1/2)
<4>[90473.350256] -(5)[0:swapper/5][name:bc&]tick broadcast enter counter cpu: 765,
689, 627, 663, 315, 211, 154, 100, success counter cpu: 149, 91, 80, 156, 45, 40,
15, 12, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 198, 166,
129, 234, 64, 52, 28, 12, o: 0-4,6-7, p: , f: , t: 90473481240006, 90473481321852,
90473480000000, 90473480000000, 90473492000000, 90473476000000, 90473660000000,
90473756000000,
<6>[90473.361624] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90473.694309] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0x40,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473694295856,15000000]
<6>[90473.694344] (6)[437:wdtk-6][thread:437][RT:90473694335317] 2022-12-15
05:47:57.284082 UTC;android time 2022-12-15 12:47:57.284082
<6>[90473.725772] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x44,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473725740856,14968555]
<5>[90473.729818] (3)[25513:kworker/3:4]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<5>[90473.730131] (3)[23446:kworker/3:1]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<5>[90473.730236] (3)[30078:kworker/3:3]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<3>[90473.731957] (3)[25513:kworker/3:4]ghr: scsi_execute exit ret = 0x0
<3>[90473.732089] (3)[23446:kworker/3:1]ghr: scsi_execute exit ret = 0x0
<3>[90473.732143] (3)[30078:kworker/3:3]ghr: scsi_execute exit ret = 0x0
<6>[90473.732192] (3)[30078:kworker/3:3]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90473.732211] (3)[30078:kworker/3:3]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90473.732611] (3)[30078:kworker/3:3]ufshcd bootdevice: rs,ret 0,419 us
<6>[90473.732876] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x54,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473732864856,14961431]
<6>[90473.752761] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x56,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473752728856,14941567]
<6>[90473.753686] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x57,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473753666702,14940629]
<6>[90473.754343] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xd7,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473754336240,14939960]
<6>[90473.754537] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0xdf,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473754505702,14939791]
<6>[90473.754562] (5)[436:wdtk-5][wdk-k]
cpu=5,lbit=0xff,cbit=0xff,7,1,2667932697,90471563046929,90471750874928,
[90473754537702,14939758]
<6>[90473.790747] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90473.821946] (0)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90473.822883] -(2)[27694:kworker/u17:1][ccci1/fsm]received MD status response
97650043
<6>[90473.823120] (0)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<6>[90473.857355] -(0)[7715:lowpool[177]][ccci1/dpmaif]tx0_resume_tx: 0x180000,
0x80000, 0x0
<6>[90473.857491] -(0)[7715:lowpool[177]][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x80000, 0x0
<6>[90474.181747] (1)[7390:kworker/1:5]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90474.181812] (1)[7390:kworker/1:5]ufshcd bootdevice: rr,ret 0,2260 us
<5>[90474.188795] -(3)[4944:Binder:1454_13]alarmtimer_enqueue, 218005397000000
<5>[90474.189089] -(3)[4944:Binder:1454_13]alarmtimer_enqueue, 218005397000000
<5>[90474.191413] -(0)[3755:Binder:1454_7]alarmtimer_enqueue, 218005397000000
<5>[90474.193352] -(0)[3755:Binder:1454_7]alarmtimer_enqueue, 218005397000000
<4>[90474.201831] -(5)[7768:lowpool[179]]CPU5: update max cpu_capacity 826
<6>[90474.259805] (3)[10823:Binder:636_2]active wakeup source: ccci_poll
<6>[90474.259851] (3)[10823:Binder:636_2]active wakeup source: ccmni_md1
<6>[90474.360437] (3)[10823:Binder:636_2]active wakeup source: ccmni_md1
<6>[90474.370191] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90474.405147] (2)[1656:watchdog]AEEIOCTL_RT_MON_Kick ( 300)
<6>[90474.405192] (2)[1656:watchdog][Hang_Detect] hang_detect enabled 10
<6>[90474.654944] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 790971, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24747ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90474.654992] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90474.814798] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<5>[90475.012382] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90475.012467] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90475.012519] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90475.012562] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90475.379684] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90475.644371] -(0)[1893:AlarmManager]alarmtimer_enqueue: 3 callbacks suppressed
<5>[90475.644390] -(0)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<5>[90475.656036] -(3)[1495:Binder:1454_2]alarmtimer_enqueue, 218065419000000
<5>[90475.710265] -(1)[4901:Binder:1454_12]alarmtimer_enqueue, 218100540000000
<5>[90475.712400] -(1)[4901:Binder:1454_12]alarmtimer_enqueue, 218100540000000
<6>[90475.838581] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90476.382526] (2)[0:swapper/2][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90476.389847] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90476.410710] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<6>[90476.861967] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<4>[90476.894757] (4)[7032:kworker/4:0]power_debug_work: start
<5>[90477.012646] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90477.012792] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90477.012866] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90477.012918] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90477.012961] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90477.399571] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90477.694604] (1)[7390:kworker/1:5]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90477.696854] (1)[7390:kworker/1:5]ghr: scsi_execute exit ret = 0x0
<6>[90477.696918] (1)[7390:kworker/1:5]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90477.696937] (1)[7390:kworker/1:5]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90477.697365] (1)[7390:kworker/1:5]ufshcd bootdevice: rs,ret 0,442 us
<6>[90477.886751] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<4>[90478.353579] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 454,
544, 312, 363, 196, 48, 48, 37, success counter cpu: 117, 166, 59, 67, 36, 6, 0, 1,
fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 219, 283, 129,
151, 68, 7, 7, 1, o: 0-1,3-7, p: , f: 2, t: 90478480000000, 90478480000000,
90478480000000, 90478486691391, 90478556000000, 90478940000000, 90478492000000,
90478716000000,
<6>[90478.409983] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90478.913030] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<5>[90479.013212] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90479.013316] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90479.013370] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90479.013543] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90479.422066] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90479.713186] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 564, r13 = 0x84000880, debug_flag = 0xf80403ff
0x4001e00e, connectivity sleep, modem sleep, subsys sleep r12 = 0x10000, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24163fb, req_sta = 0x1c00000 0x180000
0x50000011 0x1e0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a56,
wake_misc = 0x390000, pcm_flag = 0xc38702 0x0 0xc38302 0xc38302, req = 0x0,
clk_settle = 0x60fe,
<6>[90479.713243] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90479.933803] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<4>[90479.933863] -(6)[30505:kworker/6:1]CPU6: update max cpu_capacity 864
<6>[90480.431512] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90480.958770] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<5>[90481.013804] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90481.013996] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90481.014059] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90481.014102] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90481.443571] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90481.757879] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90481.760885] (4)[7032:kworker/4:0]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90481.760920] (4)[7032:kworker/4:0]ufshcd bootdevice: rr,ret 0,1854 us
<6>[90481.985295] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90482.017526] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10244,
dram:0%, syspll:0%, bus26m:58%
<6>[90482.017589] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90482.017611] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90482.017622] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90482.017636] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90482.017645] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90482.017659] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33875,33922961,5520), tx=(13625,2358,11267), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90482.017742] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90482.455887] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90483.009080] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<5>[90483.014432] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90483.014515] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90483.014574] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90483.014617] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90483.014768] (1)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90483.142378] -(0)[0:swapper/0][bq27z561] fg_update_status:
SOC:59,Volt:3929,Cur:84,Temp:346,RM:2231,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90483.366071] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 300,
363, 322, 337, 92, 15, 19, 14, success counter cpu: 58, 107, 75, 91, 9, 0, 0, 1,
fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 130, 198, 159,
164, 39, 2, 6, 0, o: 1-7, p: , f: 0, t: 90483489206468, 90483644000000,
90483506101622, 90483505559695, 90483584298933, 90484956000000, 90483836000000,
90483772000000,
<6>[90483.468437] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90483.710882] -(0)[0:swapper/0]lvts_paused = 1
<5>[90483.768558] (4)[7032:kworker/4:0]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90483.770859] (4)[7032:kworker/4:0]ghr: scsi_execute exit ret = 0x0
<6>[90483.770911] (4)[7032:kworker/4:0]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90483.770922] (4)[7032:kworker/4:0]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90483.771218] (4)[7032:kworker/4:0]ufshcd bootdevice: rs,ret 0,302 us
<6>[90484.033043] (6)[30505:kworker/6:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/6:1><0x7729>
<6>[90484.297240] (4)[10823:Binder:636_2]last active wakeup source: ttyC0
<6>[90484.401341] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90484.401563] (3)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90484.401868] (3)[23444:kworker/u16:7]PM: ++
<6>[90484.406232] (1)[7390:kworker/1:5]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90484.406278] (1)[7390:kworker/1:5]ufshcd bootdevice: rr,ret 0,2778 us
<7>[90484.412935] (2)[23444:kworker/u16:7]PM: --
<6>[90484.477218] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90484.509748] done.
<6>[90484.528534] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10198977,15202,21897scp1 sleep state: 54865,23428,23428
<6>[90484.528590] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90484.528590]
<6>[90484.528615] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90484.528615]
<6>[90484.528638] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90484.528638]
<6>[90484.528660] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90484.528660]
<5>[90484.528683] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90484.528702] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90484.528740] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90484.528784] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90484.529153] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90484.529190] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:48:08.118926111 UTC
<6>[90484.529582] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90484.529634] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90484.529662] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90484.529688] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90484.529924] (0)[576:logd.auditd]type=1400 audit(1671083288.112:1623219):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90484.531125] (2)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90484.532620] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90484.532649] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90484.553579] (1)[10823:Binder:636_2]PM: Last active Wakeup Source: eventpoll
<3>[90484.553619] (1)[10823:Binder:636_2]Freezing of tasks aborted after 0.023
seconds
<6>[90484.553641] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90484.553657] (0)[1315:receiver]Restarting tasks ...
<6>[90484.560127] (0)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90484.560147] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90484.560229] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90484.576707] done.
<5>[90484.576747] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90484.576769] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90484.580915] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90484.581711] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10198982,15203,21909scp1 sleep state: 54867,23431,23431
<6>[90484.581746] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90484.581746]
<5>[90484.581771] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90484.581790] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90484.581818] -(1)[10823:Binder:636_2]Abort: Last active Wakeup Source:
eventpoll
<5>[90484.581838] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90484.583450] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90484.584737] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90484.584790] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:48:08.174506957 UTC
<6>[90484.584994] (1)[7390:kworker/1:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:5><0x1cde>
<6>[90484.585083] (1)[7390:kworker/1:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90484.585096] (1)[7390:kworker/1:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<36>[90484.585124] (0)[576:logd.auditd]type=1400 audit(1671083288.168:1623220):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90484.585182] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90484.585205] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90484.585232] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90484.585248] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90484.789331] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90484.789374] (2)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90484.789621] (2)[23444:kworker/u16:7]PM: ++
<7>[90484.798780] (2)[23444:kworker/u16:7]PM: --
<4>[90484.898332] done.
<6>[90484.904406] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10198997,15207,21922scp1 sleep state: 54869,23431,23431
<6>[90484.904441] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90484.904441]
<6>[90484.904466] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90484.904466]
<6>[90484.904489] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90484.904489]
<6>[90484.904511] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90484.904511]
<5>[90484.904533] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90484.904551] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90484.904585] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90484.904615] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90484.904882] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90484.904917] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:48:08.494653188 UTC
<6>[90484.905107] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90484.905169] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90484.905196] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90484.905220] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90484.905519] (0)[576:logd.auditd]type=1400 audit(1671083288.488:1623221):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90484.906742] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90484.909463] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 140, r13 = 0x84000880, debug_flag = 0xf80403ff
0x4001e00e, connectivity sleep, modem sleep, subsys sleep r12 = 0x10000, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24747fb, req_sta = 0x3c00000 0x0
0x50000011 0x1e0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784a56,
wake_misc = 0x390000, pcm_flag = 0xc38702 0x0 0xc38302 0xc38302, req = 0x0,
clk_settle = 0x60fe,
<6>[90484.909549] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<4>[90484.935406] (elapsed 0.030 seconds) done.
<6>[90484.935457] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90484.935479] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90484.997705] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:336
<3>[90484.997761] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90484.997841] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90484.999312] (2)[23444:kworker/u16:7]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90485.000250] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90485.000375] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90485.000410] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90485.001293] (2)[23444:kworker/u16:7][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90485.001499] (2)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<6>[90485.003029] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90485.003054] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90485.003086] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90485.003972] (2)[10823:Binder:636_2]alarmtimer_suspend convert
218031688428908 to 2022/12/15 05:48:25 (now = 2022/12/15 05:48:08)
<5>[90485.004092] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:48:26 (1)
<5>[90485.006859] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90485.007323] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.007364] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90485.007375] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.007493] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90485.007539] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.007587] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90485.007587]
<6>[90485.007610] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90485.007610]
<6>[90485.007632] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90485.007632]
<6>[90485.007654] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90485.007654]
<6>[90485.007774] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90485.007819] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90485.007843] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90485.008519] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90485.008606] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90485.008840] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90485.009237] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90485.009260] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90485.009794] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90485.009816] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90485.010253] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90485.010588] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,790 us
<6>[90485.011502] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90485.011807] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90485.011938] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90485.012366] (2)[10823:Binder:636_2]suspend of devices complete after 59.832
msecs
<6>[90485.019051] (2)[10823:Binder:636_2]late suspend of devices complete after
6.653 msecs
<4>[90485.019080] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90485.023789]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90485.024430] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90485.024779] (0)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90485.025606] (2)[10823:Binder:636_2]noirq suspend of devices complete after
5.754 msecs
<6>[90485.025677] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90485.025677] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90485.025677] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<5>[90485.025759] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90485.025759] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90485.025759] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 578585, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767fb, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xf53d24af, wlk_cntcv_h = 0x293, 26M_off_pct =
86
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 17.657 seconds
<4>[90485.025759] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90485.025759] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90485.025759] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90485.025759] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90485.025759] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90485.025759] -(2)[0:swapper/2]Call trace:
<4>[90485.025759] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90485.025759] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90485.025759] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90485.025759] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90485.025759] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90485.025759] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90485.025759] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90485.025759] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90485.025759] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90485.025759] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90485.025759] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90485.025759] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90485.025759] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90485.025759] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90485.025759] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90485.025759] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90485.025759] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90485.025759] -(2)[0:swapper/2]---[ end trace 308173880bd0bf99 ]---
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 507028 (32k)
<4>[90485.025759] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 15.473/17.786/17.786/16.269/17.7786 seconds
<6>[90485.025759] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90485.025759] -(2)[0:swapper/2]EINT 222 is pending
<6>[90485.025906] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0xa40000, 0x0)
<6>[90485.025951] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90485.025917] -(2)[0:swapper/2]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90485.027967] (0)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_resume
<5>[90485.028828]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90485.028856] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90485.030971] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90485.036750] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.873 msecs
<6>[90485.037016] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90485.037137] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90485.037254] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90485.037302] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90485.037520] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90485.037548] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90485.042463] (2)[10823:Binder:636_2]early resume of devices complete after
4.856 msecs
<5>[90485.042903] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90485.044712] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90485.045016] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90485.045054] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1466 us
<5>[90485.045328] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90485.045763] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90485.045790] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90485.045872] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90485.045904] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90485.045992] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90485.046181] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90485.046236] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90485.046259] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90485.046342] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.046383] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90485.046508] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.046533] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90485.046546] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90485.046692] (2)[10823:Binder:636_2]zcvf, no update time:76 96 avgc:0
avgc_thread
<5>[90485.046720] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90485.050101] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90485.051164] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.051265] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90485.051600] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90485.051739] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90485.052445] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.052525] (1)[7386:kworker/1:0][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90485.054910] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.055460] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.056667] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.056776] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90485.056876] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90485.060659] (3)[10823:Binder:636_2]resume of devices complete after 18.163
msecs
<6>[90485.065632] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90485.065657] (3)[30078:kworker/3:3]Restarting tasks ...
<3>[90485.066658] (3)[30078:kworker/3:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90485.066693] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90485.067412] (3)[30078:kworker/3:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90485.067433] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<5>[90485.071189] -(3)[853:[email protected]]alarmtimer_enqueue, 218631688428908
<5>[90485.072076] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90485.072148] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90485.072196] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90485.072231] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90485.073741] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90485.073856] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90485.074064] (2)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90485.074860] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<12>[90485.086773] (0)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.087069] (0)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<4>[90485.087849] done.
<5>[90485.087872] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90485.087889] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90485.092036] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90485.092748] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10199779,15402,22136scp1 sleep state: 54871,23431,23431
<6>[90485.092772] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90485.092772]
<5>[90485.092787] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90485.092798] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90485.092819] -(3)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90485.092832] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90485.093947] -(5)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90485.093957] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90485.094737] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90485.094792] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:48:26.345258957 UTC
<6>[90485.094988] (3)[23446:kworker/3:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:1><0x5b96>
<6>[90485.095067] (3)[23446:kworker/3:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90485.095079] (3)[23446:kworker/3:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90485.095112] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90485.095131] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90485.095139] (0)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90485.095947] (0)[576:logd.auditd]type=1400 audit(1671083306.340:1623222):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90485.097820] (3)[10823:Binder:636_2]PM: suspend exit
<12>[90485.098401] (0)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.105493] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.105543] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.113346] (3)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.120363] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.120436] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.126759] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<12>[90485.137617] (3)[853:[email protected]]healthd: battery l=59 v=3937 t=34.6 h=2
st=3 c=11 fc=4110000 cc=670 chg=
<3>[90485.144516] (0)[30807:kworker/0:5]typec_cc_orientation = 2
<6>[90485.199116] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90485.199164] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90485.199255] (3)[10823:Binder:636_2]active wakeup source: ttyC0
<3>[90485.252729] (0)[30807:kworker/0:5]chg_type = 0, hvdcp_type = 0
<6>[90485.304291] (0)[30822:kworker/0:7]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90485.403137] (0)[30822:kworker/0:7]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90485.459291] (0)[30807:kworker/0:5]get_connector_temp: connector_temp:337
<6>[90485.459370] (0)[30807:kworker/0:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90485.459442] (0)[30807:kworker/0:5]mt_charger_plugin plugin:0
<6>[90485.484942] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90485.629696] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90485.629745] (0)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90485.629970] (0)[19178:kworker/u16:2]PM: ++
<7>[90485.639501] (0)[19178:kworker/u16:2]PM: --
<4>[90485.737891] done.
<6>[90485.743876] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10199809,15411,22156scp1 sleep state: 54873,23431,23431
<6>[90485.743910] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90485.743910]
<6>[90485.743935] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90485.743935]
<6>[90485.743958] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90485.743958]
<6>[90485.743980] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90485.743980]
<5>[90485.744002] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90485.744021] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90485.744059] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90485.744088] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90485.744405] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90485.744440] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:48:26.994927880 UTC
<6>[90485.744629] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90485.744687] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90485.744715] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90485.744740] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90485.745170] (0)[576:logd.auditd]type=1400 audit(1671083306.988:1623223):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90485.746310] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90485.747967] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90485.747997] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90485.774617] (elapsed 0.029 seconds) done.
<6>[90485.774653] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90485.774674] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90485.835901] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:337
<3>[90485.835958] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90485.836037] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90485.837602] (2)[23438:kworker/u16:4]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90485.838214] (1)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90485.838402] (3)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90485.838551] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90485.838679] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90485.838715] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90485.839576] (2)[23438:kworker/u16:4][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90485.839807] (2)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<3>[90485.839822] (1)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90485.839841] (3)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90485.841248] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90485.841273] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90485.841303] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90485.842245] (2)[10823:Binder:636_2]alarmtimer_suspend convert
218100540000000 to 2022/12/15 05:49:34 (now = 2022/12/15 05:48:26)
<5>[90485.842366] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:49:35 (1)
<5>[90485.846115] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90485.846559] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.846599] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90485.846610] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.846723] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90485.846766] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.846814] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90485.846814]
<6>[90485.846837] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90485.846837]
<6>[90485.846859] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90485.846859]
<6>[90485.846881] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90485.846881]
<6>[90485.847004] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90485.847048] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90485.847073] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90485.847760] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90485.847847] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90485.848084] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90485.848472] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90485.848495] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90485.848959] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90485.848978] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90485.849440] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90485.849758] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,795 us
<6>[90485.850610] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90485.850910] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90485.851046] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90485.851480] (2)[10823:Binder:636_2]suspend of devices complete after 61.590
msecs
<6>[90485.857203] (2)[10823:Binder:636_2]late suspend of devices complete after
5.692 msecs
<4>[90485.857231] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90485.862044]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90485.862673] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90485.863023] (3)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90485.863695] (2)[10823:Binder:636_2]noirq suspend of devices complete after
5.584 msecs
<6>[90485.863779] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90485.863779] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90485.863779] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<5>[90485.863863] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90485.863863] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90485.863863] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_CCIF0_EVENT_B, timer_out = 720578, r13 = 0xc40019ac, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 = 0x100, r12_ext
= 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fd, req_sta = 0x1c000ff 0x0
0x7c000017 0x1f0ffd 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x6ee3470, wlk_cntcv_h = 0x294, 26M_off_pct = 94
<6>[90485.863863] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x10
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 21.990 seconds
<4>[90485.863863] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90485.863863] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90485.863863] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90485.863863] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90485.863863] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90485.863863] -(2)[0:swapper/2]Call trace:
<4>[90485.863863] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90485.863863] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90485.863863] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90485.863863] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90485.863863] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90485.863863] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90485.863863] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90485.863863] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90485.863863] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90485.863863] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90485.863863] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90485.863863] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90485.863863] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90485.863863] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90485.863863] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90485.863863] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90485.863863] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90485.863863] -(2)[0:swapper/2]---[ end trace 308173880bd0bf9a ]---
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 683047 (32k)
<4>[90485.863863] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 20.844/21.646/21.646/21.175/21.1646 seconds
<6>[90485.863863] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90485.863989] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x1c0000, 0xa40000, 0x0)
<6>[90485.864032] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90485.863997] -(2)[0:swapper/2]pm_system_irq_wakeup: 256 triggered CCIF_AP_DATA
<6>[90485.865693] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_resume
<5>[90485.866906]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90485.866931] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90485.868890] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90485.874544] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.737 msecs
<6>[90485.874858] (2)[27694:kworker/u17:1][ccci1/cif]CCIF_MD wakeup source:
(4/14/0)(101)
<6>[90485.875291] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccci_fs
<4>[90485.875316] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90485.880169] (2)[10823:Binder:636_2]early resume of devices complete after
4.804 msecs
<5>[90485.880560] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90485.882559] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90485.882860] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90485.882898] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1549 us
<5>[90485.883172] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90485.883750] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90485.883776] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90485.883851] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90485.883883] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90485.883965] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90485.884153] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90485.884208] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90485.884230] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90485.884314] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.884354] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90485.884476] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90485.884500] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90485.884514] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90485.884665] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90485.887258] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90485.888273] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.888365] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90485.888690] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90485.888724] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90485.889346] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.889888] (3)[25513:kworker/3:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90485.891700] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.892056] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.892948] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90485.893561] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90485.893661] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90485.896329] (1)[10823:Binder:636_2]resume of devices complete after 16.128
msecs
<3>[90485.899939] (1)[7387:kworker/1:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90485.899966] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90485.900708] (1)[7387:kworker/1:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90485.900732] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90485.900944] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90485.900965] (6)[1316:vdec_log_info]Restarting tasks ...
<6>[90485.909270] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90485.909331] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90485.909387] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90485.910140] -(5)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<4>[90485.922004] done.
<5>[90485.922028] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90485.922036] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90485.924988] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90485.927817] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10200811,15655,22420scp1 sleep state: 54875,23434,23434
<6>[90485.927850] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90485.927850]
<5>[90485.927874] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90485.927892] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90485.927918] -(1)[10823:Binder:636_2]Resume caused by IRQ 256, CCIF_AP_DATA
<5>[90485.927937] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90485.928372] -(2)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90485.929077] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90485.929867] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90485.929906] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:48:49.174208496 UTC
<6>[90485.930104] (1)[7387:kworker/1:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:2><0x1cdb>
<36>[90485.930112] (0)[576:logd.auditd]type=1400 audit(1671083329.172:1623224):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90485.930217] (1)[7387:kworker/1:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90485.930232] (1)[7387:kworker/1:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90485.930268] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90485.930313] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90485.930458] (1)[10823:Binder:636_2]PM: suspend exit
<6>[90485.930517] (3)[25513:kworker/3:4]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<3>[90485.978790] (3)[25513:kworker/3:4]typec_cc_orientation = 2
<6>[90486.034461] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90486.034501] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90486.034751] (1)[10823:Binder:636_2]active wakeup source: ccci_fs
<6>[90486.034944] (1)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90486.086833] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90486.133193] (3)[25513:kworker/3:4]chg_type = 0, hvdcp_type = 0
<6>[90486.219335] (1)[7388:kworker/1:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90486.348411] (3)[25513:kworker/3:4]get_connector_temp: connector_temp:338
<6>[90486.348490] (3)[25513:kworker/3:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90486.348562] (3)[25513:kworker/3:4]mt_charger_plugin plugin:0
<6>[90486.497042] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90486.653817] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90486.653861] (3)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90486.654066] (3)[23444:kworker/u16:7]PM: ++
<7>[90486.661687] (0)[23444:kworker/u16:7]PM: --
<4>[90486.761509] done.
<6>[90486.767144] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10200852,15667,22446scp1 sleep state: 54877,23434,23434
<6>[90486.767181] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90486.767181]
<6>[90486.767202] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90486.767202]
<6>[90486.767221] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90486.767221]
<6>[90486.767240] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90486.767240]
<5>[90486.767259] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90486.767275] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90486.767310] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90486.767353] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90486.767642] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90486.767673] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:48:50.011986727 UTC
<6>[90486.767849] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90486.767900] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90486.767924] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90486.767945] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90486.768113] (0)[576:logd.auditd]type=1400 audit(1671083330.008:1623225):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90486.769192] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90486.770699] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90486.770724] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90486.794700] (elapsed 0.026 seconds) done.
<6>[90486.794730] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90486.794744] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90486.912052] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:338
<3>[90486.912090] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90486.912143] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90486.913136] (1)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90486.913166] (0)[23444:kworker/u16:7]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90486.913222] (3)[7608:kworker/u16:11]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90486.913489] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90486.913570] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90486.913589] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90486.915140] (0)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90486.915205] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<3>[90486.915212] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90487.023428] (3)[30078:kworker/3:3][bq27z561] fg_update_status:
SOC:59,Volt:3937,Cur:69,Temp:347,RM:2231,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90487.023618] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.024395] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90487.024670] (3)[25513:kworker/3:4]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<6>[90487.024686] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: bms battery
<6>[90487.024711] (2)[10823:Binder:636_2]suspend of devices aborted after 215.712
msecs
<3>[90487.024721] (2)[10823:Binder:636_2]PM: Some devices failed to suspend, or
early wake event detected
<3>[90487.025189] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90487.025202] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<6>[90487.025684] (3)[118:pd_dbg_info]///PD dbg info 66d
<5>[90487.025697] (3)[118:pd_dbg_info]<90487.025>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<3>[90487.026169] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.026262] (2)[7519:kworker/2:4][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90487.027064] (2)[7519:kworker/2:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.027134] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.027328] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.027387] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90487.027617] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90487.029989] (0)[10823:Binder:636_2]resume of devices complete after 5.251
msecs
<3>[90487.036216] (0)[30822:kworker/0:7]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90487.036245] (0)[30822:kworker/0:7][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90487.036890] (0)[30822:kworker/0:7]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90487.036914] (0)[30822:kworker/0:7][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90487.037105] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90487.037126] (7)[1315:receiver]Restarting tasks ...
<6>[90487.046464] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90487.046658] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90487.046856] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90487.057488] (6)[118:pd_dbg_info]///PD dbg info 62d
<5>[90487.057516] (6)[118:pd_dbg_info]<90487.025>TCPC-TCPC:bat_update_work_func
Battery Discharging
<4>[90487.057767] done.
<5>[90487.057802] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90487.057812] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90487.062397] (6)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90487.063184] (6)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10200867,15673,22464scp1 sleep state: 54879,23434,23434
<6>[90487.063203] (6)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90487.063203]
<5>[90487.063216] (6)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90487.063226] (6)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90487.063241] -(6)[10823:Binder:636_2]Abort: Pending Wakeup Sources: bms
battery
<5>[90487.063251] (6)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90487.064271] (5)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90487.066625] (4)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90487.066679] (4)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:48:50.310978034 UTC
<6>[90487.066848] (4)[7032:kworker/4:0][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/4:0><0x1b78>
<6>[90487.066928] (4)[7032:kworker/4:0]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90487.066940] (4)[7032:kworker/4:0]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90487.066952] (4)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90487.066978] (4)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90487.066998] (4)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90487.067010] (4)[10823:Binder:636_2]PM: suspend exit
<36>[90487.067277] (1)[576:logd.auditd]type=1400 audit(1671083330.308:1623226):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90487.072449] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90487.072522] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90487.072636] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90487.072669] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<3>[90487.113745] (2)[26031:kworker/2:5]typec_cc_orientation = 2
<6>[90487.225212] (2)[23427:kworker/2:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<5>[90487.235003] -(2)[0:swapper/2]lvts_paused = 1
<6>[90487.269521] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90487.269548] (1)[10823:Binder:636_2]active wakeup source: usb
<3>[90487.271960] (2)[26031:kworker/2:5]chg_type = 0, hvdcp_type = 0
<3>[90487.324837] (2)[26031:kworker/2:5]get_connector_temp: connector_temp:338
<6>[90487.325297] (2)[26031:kworker/2:5][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90487.326044] (2)[26031:kworker/2:5]mt_charger_plugin plugin:0
<6>[90487.377042] (2)[23427:kworker/2:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90487.501117] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90487.501164] (3)[6931:kworker/u16:8]PM: Syncing filesystems ...
<7>[90487.501452] (3)[6931:kworker/u16:8]PM: ++
<6>[90487.507273] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<7>[90487.509301] (3)[6931:kworker/u16:8]PM: --
<4>[90487.609087] done.
<6>[90487.615989] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10200893,15682,22484scp1 sleep state: 54881,23434,23434
<6>[90487.616021] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90487.616021]
<6>[90487.616046] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90487.616046]
<6>[90487.616069] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90487.616069]
<6>[90487.616091] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90487.616091]
<5>[90487.616113] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90487.616132] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90487.616165] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90487.616195] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90487.616524] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90487.616559] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:48:50.860870958 UTC
<6>[90487.616753] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90487.616811] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90487.616839] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90487.616863] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90487.617093] (0)[576:logd.auditd]type=1400 audit(1671083330.856:1623227):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90487.618449] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90487.620020] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90487.620048] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90487.646409] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90487.646834] (elapsed 0.029 seconds) done.
<6>[90487.646879] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90487.646900] -(0)[0:swapper/0]Freezing remaining freezable tasks ...
<6>[90487.649744] -(0)[0:swapper/0][ccci1/dpmaif]tx0_resume_tx: 0x1c0000, 0xa40000,
0x0
<6>[90487.649900] -(0)[0:swapper/0][ccci1/dpmaif]wake up by MD0 HIF L2(8400/0)
(3e0/0)!
<6>[90487.652181] -(1)[10823:Binder:636_2][ccci1/dpmaif]wake up by MD0 HIF L2(21/0)
(3e0/0)!
<6>[90487.652223] -(1)[10823:Binder:636_2][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0xa40000, 0x0
<6>[90487.652962] (2)[1307:dpmaif_txq0_don][ccci1/dpmaif]DPMA_MD wakeup source:
(0/2)
<4>[90487.658170] (elapsed 0.011 seconds) done.
<3>[90487.703148] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:338
<3>[90487.703196] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90487.703263] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90487.704700] (3)[6931:kworker/u16:8]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90487.704859] (0)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90487.705062] (3)[7608:kworker/u16:11]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90487.705254] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90487.705436] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90487.705472] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90487.706318] (0)[2328:kworker/u16:1][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90487.707320] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90487.707355] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<3>[90487.707381] (2)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<6>[90487.707791] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90487.707818] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90487.707845] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90487.708564] (1)[10823:Binder:636_2]alarmtimer_suspend convert
218100540000000 to 2022/12/15 05:49:34 (now = 2022/12/15 05:48:50)
<5>[90487.708682] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:49:35 (1)
<5>[90487.712210] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90487.712621] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90487.712659] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90487.712670] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90487.712779] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90487.712820] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90487.712864] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90487.712864]
<6>[90487.712887] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90487.712887]
<6>[90487.712909] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90487.712909]
<6>[90487.712931] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90487.712931]
<6>[90487.713046] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90487.713086] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90487.713110] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90487.713790] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90487.713873] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90487.714099] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90487.714436] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90487.714457] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90487.714872] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90487.714890] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90487.715356] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90487.715679] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,801 us
<6>[90487.716517] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90487.716786] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90487.716913] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90487.717320] (1)[10823:Binder:636_2]suspend of devices complete after 55.817
msecs
<6>[90487.722802] (1)[10823:Binder:636_2]late suspend of devices complete after
5.454 msecs
<4>[90487.722829] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90487.727663]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90487.728290] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90487.728641] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90487.729307] (1)[10823:Binder:636_2]noirq suspend of devices complete after
5.662 msecs
<6>[90487.729426] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90487.729426] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90487.729426] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90487.729506] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90487.729506] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90487.729506] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90487.729506] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90487.729506] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90487.729506] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_CONN2AP_SPM_WAKEUP_B, timer_out = 284102, r13 = 0x84000880, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x20,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000
0x0 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xf18d9e8, wlk_cntcv_h = 0x294, 26M_off_pct = 49
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 8.670 seconds
<4>[90487.729506] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90487.729506] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90487.729506] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90487.729506] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90487.729506] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90487.729506] -(1)[0:swapper/1]Call trace:
<4>[90487.729506] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90487.729506] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90487.729506] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90487.729506] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90487.729506] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90487.729506] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90487.729506] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90487.729506] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90487.729506] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90487.729506] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90487.729506] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90487.729506] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90487.729506] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90487.729506] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90487.729506] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90487.729506] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90487.729506] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90487.729506] -(1)[0:swapper/1]---[ end trace 308173880bd0bf9b ]---
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 122732 (32k)
<4>[90487.729506] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 3.745/5.941/7.606/4.412/7.7702 seconds
<6>[90487.729506] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90487.729651] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0xa40000, 0x0)
<6>[90487.729696] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90487.729657] -(1)[0:swapper/1]pm_system_irq_wakeup: 458 triggered wlan0
<6>[90487.731782] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_resume
<5>[90487.733429]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90487.733456] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90487.735405] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90487.741215] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.815 msecs
<6>[90487.742093] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: WLAN
hif_thread WLAN interrupt [timerfd]
<4>[90487.742121] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90487.747562] (2)[10823:Binder:636_2]early resume of devices complete after
5.381 msecs
<5>[90487.748023] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90487.750262] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90487.750616] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90487.750655] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1600 us
<5>[90487.750934] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90487.751732] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90487.751760] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90487.751842] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90487.751874] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90487.751962] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90487.752160] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90487.752224] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90487.752247] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90487.752335] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90487.752377] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90487.752501] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90487.752525] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90487.752539] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90487.752682] (2)[10823:Binder:636_2]zcvf, no update time:10 96 avgc:0
avgc_thread
<5>[90487.752710] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90487.755717] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90487.756774] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.756865] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90487.757188] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90487.757222] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90487.758135] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.758280] (2)[7306:kworker/2:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90487.760272] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.760584] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.761641] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90487.762594] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90487.762696] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90487.765200] (1)[10823:Binder:636_2]resume of devices complete after 17.594
msecs
<6>[90487.769667] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90487.769694] (1)[7388:kworker/1:3]Restarting tasks ...
<3>[90487.770314] (1)[7388:kworker/1:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90487.770348] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90487.770980] (1)[7388:kworker/1:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90487.771001] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90487.777821] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90487.778312] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90487.778398] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90487.778643] -(1)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<4>[90487.791778] done.
<5>[90487.791813] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90487.791831] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90487.796970] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90487.801315] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10201256,15783,22611scp1 sleep state: 54883,23434,23434
<6>[90487.801433] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90487.801433]
<5>[90487.801455] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90487.801471] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90487.801498] -(0)[10823:Binder:636_2]Resume caused by IRQ 458, wlan0
<5>[90487.801515] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90487.802778] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90487.803258] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90487.803967] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90487.804022] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:48:59.722200879 UTC
<6>[90487.804229] (1)[7390:kworker/1:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:5><0x1cde>
<6>[90487.804347] (1)[7390:kworker/1:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90487.804357] (1)[7390:kworker/1:5]conninfra@(consys_power_state:443)
[consys_power_state] [0xe0200c0e] wf
<6>[90487.804367] (1)[7390:kworker/1:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90487.804410] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90487.804428] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90487.804447] (1)[10823:Binder:636_2]PM: suspend exit
<36>[90487.804656] (3)[576:logd.auditd]type=1400 audit(1671083339.715:1623228):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<3>[90487.850418] (2)[7306:kworker/2:3]typec_cc_orientation = 2
<6>[90487.905706] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90487.905754] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90487.955278] (1)[7387:kworker/1:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90488.008991] (2)[7306:kworker/2:3]chg_type = 0, hvdcp_type = 0
<3>[90488.057752] (2)[7306:kworker/2:3]get_connector_temp: connector_temp:338
<6>[90488.057804] (2)[7306:kworker/2:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90488.057876] (2)[7306:kworker/2:3]mt_charger_plugin plugin:0
<6>[90488.137502] (1)[7387:kworker/1:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90488.268732] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90488.268772] (0)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90488.268880] (0)[7405:kworker/u16:10]PM: ++
<7>[90488.278881] (2)[7405:kworker/u16:10]PM: --
<4>[90488.371049] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 666,
689, 630, 576, 307, 178, 133, 72, success counter cpu: 95, 84, 97, 107, 54, 26, 12,
7, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 152, 147, 159,
188, 77, 29, 21, 7, o: 0,2-7, p: , f: 1, t: 90488494245315, 90488494246622,
90488504000000, 90488500000000, 90488796000000, 90488620371107, 90488508000000,
90488764000000,
<4>[90488.377253] done.
<6>[90488.386008] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10201284,15790,22625scp1 sleep state: 54885,23436,23436
<6>[90488.386040] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90488.386040]
<6>[90488.386065] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90488.386065]
<6>[90488.386087] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90488.386087]
<6>[90488.386110] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90488.386110]
<5>[90488.386131] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90488.386149] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90488.386183] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90488.386212] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90488.386508] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90488.386541] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:49:00.304744572 UTC
<6>[90488.386714] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90488.386773] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90488.386800] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90488.386823] (0)[613:teei_daemon]Freezing user space processes ...
<5>[90488.388107] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90488.389666] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90488.389693] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90488.413009] (elapsed 0.026 seconds) done.
<6>[90488.413041] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90488.413060] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<3>[90488.495665] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:338
<3>[90488.495722] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90488.495800] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90488.497443] (0)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90488.497500] (2)[7405:kworker/u16:10]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90488.497750] (0)[7383:kworker/u16:6]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90488.498235] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90488.498363] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90488.498401] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90488.499317] (4)[7405:kworker/u16:10][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90488.499827] (4)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90488.499882] (0)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90488.499984] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90488.501242] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90488.501270] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90488.501302] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90488.502203] (2)[10823:Binder:636_2]alarmtimer_suspend convert
218100540000000 to 2022/12/15 05:49:34 (now = 2022/12/15 05:49:00)
<5>[90488.502325] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:49:35 (1)
<5>[90488.505931] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90488.506372] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90488.506411] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90488.506423] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90488.506538] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90488.506582] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90488.506629] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90488.506629]
<6>[90488.506652] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90488.506652]
<6>[90488.506674] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90488.506674]
<6>[90488.506697] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90488.506697]
<6>[90488.506816] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90488.506860] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90488.506885] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90488.507581] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90488.507669] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90488.507907] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90488.508289] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90488.508311] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90488.508782] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90488.508801] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90488.509235] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90488.509636] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,848 us
<6>[90488.510587] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90488.510894] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90488.511027] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90488.511455] (2)[10823:Binder:636_2]suspend of devices complete after 84.601
msecs
<6>[90488.517512] (0)[10823:Binder:636_2]late suspend of devices complete after
6.026 msecs
<4>[90488.517541] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90488.522396]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90488.523028] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90488.523387] (1)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90488.524057] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.733 msecs
<6>[90488.524137] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90488.524137] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90488.524137] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<6>[90488.524218] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90488.524218] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90488.524218] -(0)[0:swapper/0][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90488.524218] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90488.524218] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90488.524218] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 554729, r13 = 0xc40009ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a6767ff, req_sta =
0x1c000df 0x0 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x1cd5524f, wlk_cntcv_h = 0x294,
26M_off_pct = 89
<6>[90488.524218] -(0)[0:swapper/0][ccci1/WK]CCIF RX bitmap:0x0
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 16.928 seconds
<4>[90488.524218] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90488.524218] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90488.524218] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90488.524218] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90488.524218] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90488.524218] -(0)[0:swapper/0]Call trace:
<4>[90488.524218] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90488.524218] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90488.524218] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90488.524218] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90488.524218] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90488.524218] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90488.524218] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90488.524218] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90488.524218] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90488.524218] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90488.524218] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90488.524218] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90488.524218] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90488.524218] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90488.524218] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90488.524218] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90488.524218] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90488.524218] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90488.524218] -(0)[0:swapper/0]---[ end trace 308173880bd0bf9c ]---
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 516292 (32k)
<4>[90488.524218] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 15.755/17.097/17.097/16.222/17.7097 seconds
<6>[90488.524218] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90488.524332] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0xa40000, 0x0)
<6>[90488.524374] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90488.524353] -(0)[0:swapper/0]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90488.526542] (1)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90488.527995]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90488.528023] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90488.530041] (0)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90488.535429] (0)[10823:Binder:636_2]noirq resume of devices complete after
10.101 msecs
<6>[90488.535604] -(1)[0:swapper/1][ccci1/dpmaif]wake up by MD0 HIF L2(0/1)(3e0/0)!
<6>[90488.535652] (1)[0:swapper/1][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90488.536080] (0)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccmni_md1
<4>[90488.536106] (0)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90488.536304] -(2)[0:swapper/2][ccci1/dpmaif]tx1_resume_tx: 0x40000, 0xa40000,
0x0
<6>[90488.536456] -(2)[0:swapper/2][ccci1/dpmaif]clear txq1_resume_done: 0x40000,
0x40000, 0x0
<6>[90488.541497] (0)[10823:Binder:636_2]early resume of devices complete after
5.340 msecs
<5>[90488.542218] (0)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90488.544134] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90488.544516] (0)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90488.544551] (0)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1527 us
<5>[90488.545259] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90488.545656] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90488.545682] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90488.545753] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90488.545785] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90488.545864] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90488.546047] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90488.546109] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90488.546132] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90488.546211] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90488.546251] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90488.546375] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90488.546399] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90488.546413] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90488.546557] (1)[10823:Binder:636_2]zcvf, no update time:28 96 avgc:0
avgc_thread
<5>[90488.546583] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90488.549902] (3)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90488.550866] (3)[25513:kworker/3:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90488.550959] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90488.551240] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90488.551274] (3)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90488.552107] (3)[30078:kworker/3:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90488.552183] (3)[23446:kworker/3:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90488.554136] (3)[23446:kworker/3:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90488.554502] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90488.554763] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90488.555978] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90488.556428] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90488.558677] (1)[10823:Binder:636_2]resume of devices complete after 17.147
msecs
<6>[90488.561473] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90488.561483] (1)[7387:kworker/1:2]Restarting tasks ...
<3>[90488.562024] (1)[7387:kworker/1:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90488.562064] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90488.562875] (1)[7387:kworker/1:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90488.562900] (1)[7387:kworker/1:2][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90488.568195] (4)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90488.568236] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90488.568321] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90488.568815] -(6)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<6>[90488.572399] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90488.580133] done.
<5>[90488.580161] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90488.580176] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90488.583539] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202054,15990,22845scp1 sleep state: 54887,23436,23436
<6>[90488.583566] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90488.583566]
<5>[90488.583583] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90488.583596] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90488.583616] -(3)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90488.583631] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90488.583828] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<5>[90488.584645] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90488.584908] -(2)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90488.585807] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90488.585857] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:49:17.436507879 UTC
<6>[90488.586071] (1)[7390:kworker/1:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:5><0x1cde>
<6>[90488.586173] (1)[7390:kworker/1:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90488.586187] (1)[7390:kworker/1:5]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90488.586249] (3)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90488.586416] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90488.586448] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90488.587371] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90488.616378] (3)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(102)
<3>[90488.643075] (3)[7406:kworker/3:2]typec_cc_orientation = 2
<6>[90488.688600] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90488.688647] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90488.688691] (2)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90488.688710] (2)[10823:Binder:636_2]active wakeup source: ccmni_md1
<3>[90488.751220] (3)[7406:kworker/3:2]chg_type = 0, hvdcp_type = 0
<6>[90488.794191] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x2,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794158196,15000000]
<6>[90488.794252] (1)[432:wdtk-1][thread:432][RT:90488794235119] 2022-12-15
05:49:17.644910 UTC;android time 2022-12-15 12:49:17.644910
<6>[90488.794366] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x3,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794344735,14999813]
<6>[90488.794439] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x7,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794420658,14999738]
<6>[90488.794465] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0x87,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794456965,14999701]
<6>[90488.794520] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0x8f,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794501965,14999656]
<6>[90488.794665] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x9f,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794654196,14999504]
<6>[90488.794720] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0xdf,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794709273,14999449]
<6>[90488.794801] (5)[436:wdtk-5][wdk-k]
cpu=5,lbit=0xff,cbit=0xff,7,1,2667932697,90488386528503,90488585828426,
[90488794788658,14999370]
<6>[90488.801251] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90488.879765] (3)[2356:kworker/3:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90488.925757] (2)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90488.926408] -(3)[7539:kworker/u17:0][ccci1/fsm]received MD status response
97660043
<6>[90488.926637] (2)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<3>[90488.930065] (3)[7406:kworker/3:2]get_connector_temp: connector_temp:338
<6>[90488.930111] (3)[7406:kworker/3:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90488.930176] (3)[7406:kworker/3:2]mt_charger_plugin plugin:0
<5>[90489.072993] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90489.073083] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90489.073139] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90489.073182] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90489.073249] (2)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90489.565909] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90489.565949] (3)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90489.566140] (3)[7608:kworker/u16:11]PM: ++
<7>[90489.575129] (3)[7608:kworker/u16:11]PM: --
<6>[90489.585129] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90489.597524] (1)[7390:kworker/1:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:5><0x1cde>
<6>[90489.653085] (3)[7406:kworker/3:2][bq27z561] fg_update_status:
SOC:59,Volt:3928,Cur:205,Temp:348,RM:2230,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90489.653250] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90489.654217] (3)[2356:kworker/3:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90489.654835] (0)[118:pd_dbg_info]///PD dbg info 128d
<5>[90489.654861] (0)[118:pd_dbg_info]<90489.654>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90489.654861] <90489.654>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90489.662876] (3)[2356:kworker/3:5]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<4>[90489.673501] done.
<6>[90489.678358] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202104,16007,22870scp1 sleep state: 54889,23436,23436
<6>[90489.678389] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90489.678389]
<6>[90489.678413] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90489.678413]
<6>[90489.678436] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90489.678436]
<6>[90489.678458] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90489.678458]
<5>[90489.678479] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90489.678497] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90489.678529] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90489.678557] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90489.678799] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90489.678831] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:49:18.529499264 UTC
<6>[90489.679006] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90489.679063] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90489.679090] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90489.679112] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90489.679130] (0)[576:logd.auditd]type=1400 audit(1671083358.526:1623231):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90489.680235] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90489.681847] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90489.681878] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90489.701179] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: NETLINK
<3>[90489.701218] (2)[10823:Binder:636_2]Freezing of tasks aborted after 0.022
seconds
<6>[90489.701241] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90489.701256] (5)[1315:receiver]Restarting tasks ...
<6>[90489.707790] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90489.708164] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90489.708251] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90489.718078] done.
<5>[90489.718109] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90489.718120] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90489.722008] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90489.726828] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202108,16013,22889scp1 sleep state: 54891,23436,23436
<6>[90489.726865] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90489.726865]
<5>[90489.726880] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90489.726891] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90489.726913] -(2)[10823:Binder:636_2]Abort: Pending Wakeup Sources: NETLINK
<5>[90489.726929] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90489.727903] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90489.728626] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90489.728712] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:49:18.579367648 UTC
<6>[90489.728922] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<6>[90489.729018] (2)[7306:kworker/2:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90489.729029] (2)[7306:kworker/2:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90489.729060] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90489.729075] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90489.729091] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90489.729812] (0)[576:logd.auditd]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<36>[90489.729992] (0)[576:logd.auditd]type=1400 audit(1671083358.574:1623232):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90489.783074] -(0)[0:swapper/0]lvts_paused = 1
<6>[90489.931337] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90489.931381] (1)[7608:kworker/u16:11]PM: Syncing filesystems ...
<7>[90489.931635] (1)[7608:kworker/u16:11]PM: ++
<7>[90489.938954] (1)[7608:kworker/u16:11]PM: --
<6>[90489.953442] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 554729, r13 = 0xc40009ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a6767ff, req_sta =
0x1c000df 0x0 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe,
<6>[90489.953526] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<4>[90490.038577] done.
<6>[90490.047324] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202123,16018,22905scp1 sleep state: 54893,23436,23436
<6>[90490.047373] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90490.047373]
<6>[90490.047397] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90490.047397]
<6>[90490.047420] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90490.047420]
<6>[90490.047442] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90490.047442]
<5>[90490.047463] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90490.047481] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90490.047511] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90490.047539] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90490.047834] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90490.047867] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:49:18.898534418 UTC
<6>[90490.048068] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90490.048125] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90490.048151] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90490.048174] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90490.048270] (3)[576:logd.auditd]type=1400 audit(1671083358.894:1623233):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90490.049390] (3)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<4>[90490.075716] (elapsed 0.027 seconds) done.
<6>[90490.075753] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90490.075773] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<3>[90490.134112] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:338
<3>[90490.134161] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90490.134229] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90490.135591] (3)[7405:kworker/u16:10]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90490.135854] (1)[7608:kworker/u16:11]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90490.135944] (0)[6931:kworker/u16:8]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90490.136360] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90490.136474] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90490.136509] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90490.137415] (3)[7405:kworker/u16:10][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90490.138101] (3)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90490.138220] (0)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<3>[90490.138232] (3)[7608:kworker/u16:11]ghr: scsi_execute exit ret = 0x0
<6>[90490.139183] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90490.139211] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90490.139240] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90490.140073] (1)[10823:Binder:636_2]alarmtimer_suspend convert
218100540000000 to 2022/12/15 05:49:34 (now = 2022/12/15 05:49:18)
<5>[90490.140190] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:49:35 (1)
<5>[90490.143877] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90490.144302] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90490.144340] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90490.144352] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90490.144461] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90490.144501] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90490.144545] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90490.144545]
<6>[90490.144568] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90490.144568]
<6>[90490.144590] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90490.144590]
<6>[90490.144611] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90490.144611]
<6>[90490.144722] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90490.144763] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90490.144786] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90490.145451] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90490.145534] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90490.145759] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90490.146100] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90490.146121] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90490.146553] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90490.146572] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90490.147051] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90490.147388] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,829 us
<6>[90490.148341] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90490.148615] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90490.148743] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90490.149154] (1)[10823:Binder:636_2]suspend of devices complete after 59.320
msecs
<6>[90490.156094] (1)[10823:Binder:636_2]late suspend of devices complete after
6.910 msecs
<4>[90490.156121] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90490.162158]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90490.162786] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90490.163162] (1)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90490.163947] (1)[10823:Binder:636_2]noirq suspend of devices complete after
6.988 msecs
<6>[90490.164016] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90490.164016] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90490.164016] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90490.164093] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90490.164093] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90490.164093] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90490.164093] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90490.164093] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90490.164093] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 11851, r13 = 0xc40019ac, debug_flag =
0xf8040300 0x40000002, connectivity sleep, modem not sleep, subsys not sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767fb, req_sta =
0x1c000ff 0x0 0x50000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x1e62e743, wlk_cntcv_h = 0x294,
26M_off_pct = 0
<6>[90490.164093] -(1)[0:swapper/1][ccci1/WK]CCIF RX bitmap:0x0
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 0.361 seconds
<4>[90490.164093] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90490.164093] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90490.164093] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90490.164093] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90490.164093] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90490.164093] -(1)[0:swapper/1]Call trace:
<4>[90490.164093] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90490.164093] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90490.164093] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90490.164093] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90490.164093] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90490.164093] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90490.164093] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90490.164093] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90490.164093] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90490.164093] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90490.164093] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90490.164093] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90490.164093] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90490.164093] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90490.164093] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90490.164093] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90490.164093] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90490.164093] -(1)[0:swapper/1]---[ end trace 308173880bd0bf9d ]---
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 0 (32k)
<4>[90490.164093] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.000/0.000/0.000/0.000/0.000 seconds
<6>[90490.164093] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90490.164206] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90490.164229] -(1)[0:swapper/1]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90490.166334] (1)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90490.167331]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90490.167577] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90490.169610] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90490.175184] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.074 msecs
<6>[90490.175358] -(2)[0:swapper/2][ccci1/dpmaif]wake up by MD0 HIF L2(40/1)
(3e0/0)!
<6>[90490.175408] (2)[0:swapper/2][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90490.175648] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
<4>[90490.175671] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90490.180693] (1)[10823:Binder:636_2]early resume of devices complete after
4.969 msecs
<5>[90490.181064] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90490.184188] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90490.184499] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90490.184534] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,2496 us
<5>[90490.184808] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90490.185498] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90490.185525] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90490.185601] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90490.185633] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90490.185713] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90490.185905] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90490.185968] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90490.185992] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90490.186081] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90490.186124] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90490.186249] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90490.186273] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90490.186287] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90490.186430] (1)[10823:Binder:636_2]zcvf, no update time:30 96 avgc:0
avgc_thread
<5>[90490.186456] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90490.189533] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90490.190554] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90490.190651] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90490.190952] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90490.190986] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90490.191578] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90490.191733] (1)[7388:kworker/1:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90490.193851] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90490.194133] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90490.195099] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90490.195946] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90490.196045] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90490.198607] (0)[10823:Binder:636_2]resume of devices complete after 17.882
msecs
<3>[90490.202840] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90490.202866] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90490.203422] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90490.203443] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90490.203608] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90490.203626] (4)[1315:receiver]Restarting tasks ...
<6>[90490.210289] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90490.210975] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<6>[90490.212141] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90490.212453] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90490.223064] done.
<5>[90490.223092] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90490.223107] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<12>[90490.224875] (2)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.224931] (2)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<5>[90490.226128] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90490.226956] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202155,16028,22934scp1 sleep state: 54895,23436,23436
<6>[90490.226990] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90490.226990]
<5>[90490.227014] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90490.227032] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90490.227059] -(2)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90490.227078] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90490.228195] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90490.228408] -(5)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90490.228866] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90490.228903] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:49:19.443990339 UTC
<6>[90490.229092] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<6>[90490.229165] (2)[7306:kworker/2:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90490.229176] (2)[7306:kworker/2:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90490.229201] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90490.229205] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90490.229218] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90490.229241] (2)[10823:Binder:636_2]PM: suspend exit
<36>[90490.229841] (1)[576:logd.auditd]type=1400 audit(1671083359.439:1623234):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<12>[90490.230625] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.234601] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.234635] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.238341] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.242276] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.242303] (6)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.248448] (0)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<12>[90490.256971] (0)[853:[email protected]]healthd: battery l=59 v=3928 t=34.8 h=2
st=3 c=186 fc=4110000 cc=670 chg=
<6>[90490.330482] (2)[10823:Binder:636_2]active wakeup source: main
<6>[90490.330525] (2)[10823:Binder:636_2]active wakeup source: usb
<6>[90490.330563] (2)[10823:Binder:636_2]active wakeup source: ccmni_md1
<6>[90490.336896] (0)[30822:kworker/0:7]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90490.391253] (1)[7388:kworker/1:3]typec_cc_orientation = 2
<3>[90490.440412] (1)[7388:kworker/1:3]chg_type = 0, hvdcp_type = 0
<6>[90490.494691] (0)[30822:kworker/0:7]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90490.594180] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90490.621244] (1)[7388:kworker/1:3]get_connector_temp: connector_temp:338
<6>[90490.621294] (1)[7388:kworker/1:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90490.621434] (1)[7388:kworker/1:3]mt_charger_plugin plugin:0
<5>[90490.947404] -(2)[0:swapper/2]lvts_paused = 1
<5>[90491.073653] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90491.073744] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90491.073801] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90491.073844] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90491.197851] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90491.197901] (2)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90491.198024] (2)[7405:kworker/u16:10]PM: ++
<7>[90491.207040] (0)[7405:kworker/u16:10]PM: --
<6>[90491.233553] (2)[7306:kworker/2:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:3><0x1c8a>
<6>[90491.272104] (2)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3933,Cur:150,Temp:348,RM:2230,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90491.305606] done.
<5>[90491.310839] -(2)[0:swapper/2]lvts_paused = 1
<5>[90491.310930] -(2)[0:swapper/2]Cnt= 10 LVTS TC 4, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<5>[90491.310974] -(2)[0:swapper/2]Cnt= 20 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<6>[90491.313262] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202205,16046,22963scp1 sleep state: 54897,23436,23436
<6>[90491.313293] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90491.313293]
<6>[90491.313447] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90491.313447]
<6>[90491.313472] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90491.313472]
<6>[90491.313495] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90491.313495]
<5>[90491.313517] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90491.313536] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90491.313575] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90491.313605] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90491.314102] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90491.314137] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:49:20.529234108 UTC
<6>[90491.314350] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90491.314409] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90491.314437] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90491.314463] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90491.314653] (3)[576:logd.auditd]type=1400 audit(1671083360.527:1623235):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90491.315832] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90491.317816] (0)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90491.317844] (0)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90491.342465] (elapsed 0.027 seconds) done.
<6>[90491.342498] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90491.342518] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.010 seconds) done.
<3>[90491.398716] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:338
<3>[90491.398764] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90491.398831] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90491.400279] (3)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90491.400483] (0)[7405:kworker/u16:10]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90491.400641] (3)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90491.401042] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90491.401153] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90491.401188] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90491.402290] (3)[19178:kworker/u16:2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90491.402990] (3)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90491.403047] (0)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90491.403078] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90491.403893] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90491.403921] (2)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90491.403950] (2)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90491.404697] (2)[10823:Binder:636_2]alarmtimer_suspend convert
218100540000000 to 2022/12/15 05:49:34 (now = 2022/12/15 05:49:20)
<5>[90491.404816] (2)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:49:35 (1)
<5>[90491.408226] (2)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90491.408661] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90491.408699] (2)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90491.408711] (2)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90491.408821] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90491.408862] (2)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90491.408909] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90491.408909]
<6>[90491.408932] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90491.408932]
<6>[90491.408954] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90491.408954]
<6>[90491.408976] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90491.408976]
<6>[90491.409086] (2)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90491.409125] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90491.409148] (2)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90491.409831] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90491.409915] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90491.410141] (2)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90491.410485] (2)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90491.410506] (2)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90491.410926] (2)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90491.410944] (2)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90491.411411] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90491.411753] (2)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,821 us
<6>[90491.412598] (2)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90491.412874] (2)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90491.412998] (2)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90491.413475] (2)[10823:Binder:636_2]suspend of devices complete after 56.767
msecs
<6>[90491.419300] (2)[10823:Binder:636_2]late suspend of devices complete after
5.791 msecs
<4>[90491.419327] (2)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90491.425043]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90491.425854] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90491.426234] (2)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90491.427057] (2)[10823:Binder:636_2]noirq suspend of devices complete after
7.047 msecs
<6>[90491.427126] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90491.427126] -(2)[0:swapper/2][name:spm&]NO pll_if_on !!!
<4>[90491.427126] -(2)[0:swapper/2][name:spm&]NO subsys_if_on !!!
<6>[90491.427201] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90491.427201] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90491.427201] -(2)[0:swapper/2][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90491.427201] -(2)[0:swapper/2]suspend warning[0m: PG_MD1
<5>[90491.427201] -(2)[0:swapper/2]suspend warning[0m: PG_CONN
<6>[90491.427201] -(2)[0:swapper/2]skip cpu_pm_suspend when s2idle
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 45458, r13 = 0xc40019ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6767ff, req_sta =
0x1c000ff 0x0 0x50000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x207154d8, wlk_cntcv_h = 0x294,
26M_off_pct = 29
<6>[90491.427201] -(2)[0:swapper/2][ccci1/WK]CCIF RX bitmap:0x0
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][SPM] Suspended for 1.387 seconds
<4>[90491.427201] -(2)[0:swapper/2]------------[ cut here ]------------
<4>[90491.427201] -(2)[0:swapper/2]WARNING: CPU: 2 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90491.427201] -(2)[0:swapper/2]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90491.427201] -(2)[0:swapper/2]CPU: 2 PID: 0 Comm: swapper/2 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90491.427201] -(2)[0:swapper/2]Hardware name: MT6891Z/CZA (DT)
<4>[90491.427201] -(2)[0:swapper/2]Call trace:
<4>[90491.427201] -(2)[0:swapper/2] dump_backtrace+0x0/0x1b4
<4>[90491.427201] -(2)[0:swapper/2] show_stack+0x14/0x1c
<4>[90491.427201] -(2)[0:swapper/2] dump_stack+0xd4/0x10c
<4>[90491.427201] -(2)[0:swapper/2] __warn+0xdc/0x168
<4>[90491.427201] -(2)[0:swapper/2] warn_slowpath_null+0x1c/0x24
<4>[90491.427201] -(2)[0:swapper/2] getnstimeofday64+0x120/0x128
<4>[90491.427201] -(2)[0:swapper/2] mt6885_show_message+0xcf8/0xe28
<4>[90491.427201] -(2)[0:swapper/2] mt6885_issuer_func+0x38/0x48
<4>[90491.427201] -(2)[0:swapper/2] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90491.427201] -(2)[0:swapper/2] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90491.427201] -(2)[0:swapper/2] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90491.427201] -(2)[0:swapper/2] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90491.427201] -(2)[0:swapper/2] mtk_idle_state_enter+0xbc/0xd0
<4>[90491.427201] -(2)[0:swapper/2] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90491.427201] -(2)[0:swapper/2] do_idle+0x12c/0x2b0
<4>[90491.427201] -(2)[0:swapper/2] cpu_startup_entry+0x20/0x24
<4>[90491.427201] -(2)[0:swapper/2] secondary_start_kernel+0x128/0x134
<4>[90491.427201] -(2)[0:swapper/2]---[ end trace 308173880bd0bf9e ]---
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][SPM] md_slp_duration = 15515 (32k)
<4>[90491.427201] -(2)[0:swapper/2][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.473/1.246/1.960/0.713/1.1995 seconds
<6>[90491.427201] -(2)[0:swapper/2]skip cpu_pm_resume when s2idle
<6>[90491.427327] -(2)[0:swapper/2][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x80000, 0x0)
<6>[90491.427371] -(2)[0:swapper/2]i2c no need switch top pll
<4>[90491.427339] -(2)[0:swapper/2]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90491.429512] (2)[7383:kworker/u16:6]mtu3_phone musb-hdrc: mtu3_resume
<5>[90491.430391]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90491.430415] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90491.432465] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90491.438074] (2)[10823:Binder:636_2]noirq resume of devices complete after
9.806 msecs
<6>[90491.438248] -(3)[0:swapper/3][ccci1/dpmaif]wake up by MD0 HIF L2(0/1)(3e0/0)!
<6>[90491.438299] (3)[0:swapper/3][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90491.438922] -(2)[398:ipi_cpu_dvfs_rt][ccci1/dpmaif]tx1_resume_tx: 0x40000,
0x80000, 0x0
<6>[90491.439062] -(0)[0:swapper/0][ccci1/dpmaif]clear txq1_resume_done: 0x40000,
0x40000, 0x0
<6>[90491.439282] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
ccmni_md1
<4>[90491.439309] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90491.444233] (2)[10823:Binder:636_2]early resume of devices complete after
4.875 msecs
<5>[90491.444631] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90491.446576] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90491.446872] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90491.446910] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1427 us
<5>[90491.447178] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90491.447871] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90491.447898] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90491.447974] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90491.448007] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90491.448087] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90491.448277] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90491.448331] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90491.448354] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90491.448435] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90491.448477] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90491.448599] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90491.448623] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90491.448637] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90491.448786] (2)[10823:Binder:636_2]zcvf, no update time:32 96 avgc:0
avgc_thread
<5>[90491.448812] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90491.451760] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90491.452806] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90491.452903] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90491.453195] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90491.453228] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90491.453938] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90491.454081] (2)[23427:kworker/2:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90491.456122] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90491.456693] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90491.458161] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90491.458265] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90491.458357] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90491.462149] (0)[10823:Binder:636_2]resume of devices complete after 17.872
msecs
<3>[90491.467229] (0)[25356:kworker/0:1]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90491.467257] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90491.468009] (0)[25356:kworker/0:1]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90491.468033] (0)[25356:kworker/0:1][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90491.468271] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90491.468293] (1)[1316:vdec_log_info]Restarting tasks ...
<6>[90491.476070] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90491.476426] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90491.476992] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90491.477026] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218100540000000
<4>[90491.490133] done.
<5>[90491.490155] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90491.490164] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90491.494414] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90491.501019] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202283,16069,23015scp1 sleep state: 54899,23436,23436
<6>[90491.501056] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90491.501056]
<5>[90491.501080] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90491.501196] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90491.501224] -(0)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90491.501243] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90491.502818] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90491.503417] -(3)[404:EEM_CTRL_B][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90491.503555] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90491.503597] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:49:22.109447338 UTC
<36>[90491.503799] (3)[576:logd.auditd]type=1400 audit(1671083362.105:1623236):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90491.503817] (0)[25356:kworker/0:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:1><0x630c>
<6>[90491.503913] (0)[25356:kworker/0:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90491.503930] (0)[25356:kworker/0:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90491.504717] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90491.504746] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90491.504766] (0)[10823:Binder:636_2]PM: suspend exit
<6>[90491.504970] (0)[30822:kworker/0:7]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<3>[90491.544825] (0)[30822:kworker/0:7]typec_cc_orientation = 2
<6>[90491.602378] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90491.606266] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90491.606298] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90491.606338] (0)[10823:Binder:636_2]active wakeup source: ccmni_md1
<3>[90491.656941] (0)[30822:kworker/0:7]chg_type = 0, hvdcp_type = 0
<3>[90491.704480] (0)[30822:kworker/0:7]get_connector_temp: connector_temp:338
<6>[90491.704748] (0)[30822:kworker/0:7][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90491.705471] (0)[30822:kworker/0:7]mt_charger_plugin plugin:0
<6>[90491.753186] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90491.834135] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<5>[90491.997709] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90492.254598] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10236,
dram:0%, syspll:0%, bus26m:35%
<6>[90492.254708] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90492.254730] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90492.254740] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90492.254754] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90492.254762] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90492.254775] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33879,33923250,5520), tx=(13630,2359,11271), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90492.254854] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90492.445753] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90492.445804] (1)[7383:kworker/u16:6]PM: Syncing filesystems ...
<7>[90492.446014] (1)[7383:kworker/u16:6]PM: ++
<7>[90492.455593] (0)[7383:kworker/u16:6]PM: --
<6>[90492.509793] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<4>[90492.553691] done.
<6>[90492.560009] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202333,16083,23039scp1 sleep state: 54901,23436,23436
<6>[90492.560043] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90492.560043]
<6>[90492.560068] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90492.560068]
<6>[90492.560091] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90492.560091]
<6>[90492.560113] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90492.560113]
<5>[90492.560135] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90492.560153] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90492.560193] (0)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90492.560223] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90492.560696] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90492.560732] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:49:23.166592185 UTC
<6>[90492.560968] (0)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90492.561026] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90492.561053] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90492.561077] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90492.561280] (3)[576:logd.auditd]type=1400 audit(1671083363.161:1623237):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90492.562590] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90492.563704] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90492.563723] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<6>[90492.571504] (0)[10823:Binder:636_2][bq27z561] fg_update_status:
SOC:59,Volt:3933,Cur:110,Temp:348,RM:2230,FC:4110,FAST:0,ST:2,NAME:bq27z561
<4>[90492.587607] (elapsed 0.026 seconds) done.
<6>[90492.587646] (0)[10823:Binder:636_2]OOM killer disabled.
<6>[90492.587662] (0)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.012 seconds) done.
<3>[90492.648972] (0)[10823:Binder:636_2]get_connector_temp: connector_temp:338
<3>[90492.649027] (0)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90492.649105] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90492.650678] (0)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90492.651290] (1)[19178:kworker/u16:2]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90492.651478] (1)[23438:kworker/u16:4]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90492.651715] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90492.651845] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90492.651886] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90492.652765] (0)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90492.652939] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90492.653001] (1)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90492.653124] (1)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<6>[90492.654523] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90492.654549] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90492.654577] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90492.655316] (0)[10823:Binder:636_2]alarmtimer_suspend convert
218100540000000 to 2022/12/15 05:49:34 (now = 2022/12/15 05:49:22)
<5>[90492.655436] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:49:35 (1)
<5>[90492.657518] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90492.657919] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90492.657955] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90492.657966] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90492.658072] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90492.658114] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90492.658157] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90492.658157]
<6>[90492.658179] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90492.658179]
<6>[90492.658201] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90492.658201]
<6>[90492.658223] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90492.658223]
<6>[90492.658332] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90492.658372] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90492.658396] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90492.659002] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90492.659086] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90492.659309] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90492.659658] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90492.659680] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90492.660094] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90492.660113] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90492.660556] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90492.660939] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,840 us
<6>[90492.661808] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90492.662076] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90492.662197] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90492.662604] (0)[10823:Binder:636_2]suspend of devices complete after 58.726
msecs
<6>[90492.667945] (0)[10823:Binder:636_2]late suspend of devices complete after
5.311 msecs
<4>[90492.667972] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90492.672439]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90492.673131] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90492.673549] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90492.674241] (0)[10823:Binder:636_2]noirq suspend of devices complete after
5.571 msecs
<6>[90492.674325] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90492.674325] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90492.674325] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90492.674409] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90492.674409] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90492.674409] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 392961, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24347fb, req_sta = 0x3c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x2ab44544, wlk_cntcv_h = 0x294, 26M_off_pct =
57
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 11.992 seconds
<4>[90492.674409] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90492.674409] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90492.674409] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90492.674409] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90492.674409] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90492.674409] -(0)[0:swapper/0]Call trace:
<4>[90492.674409] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90492.674409] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90492.674409] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90492.674409] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90492.674409] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90492.674409] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90492.674409] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90492.674409] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90492.674409] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90492.674409] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90492.674409] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90492.674409] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90492.674409] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90492.674409] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90492.674409] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90492.674409] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90492.674409] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90492.674409] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90492.674409] -(0)[0:swapper/0]---[ end trace 308173880bd0bf9f ]---
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 187129 (32k)
<4>[90492.674409] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 5.710/11.252/11.252/7.441/11.1252 seconds
<6>[90492.674409] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90492.674409] -(0)[0:swapper/0]EINT 222 is pending
<6>[90492.674554] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x80000, 0x0)
<6>[90492.674599] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90492.674567] -(0)[0:swapper/0]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90492.676724] (2)[19178:kworker/u16:2]mtu3_phone musb-hdrc: mtu3_resume
<5>[90492.677825]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90492.677848] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90492.679894] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90492.685840] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.470 msecs
<6>[90492.686113] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90492.686235] -(1)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90492.686327] -(1)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90492.686374] (1)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90492.686539] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90492.686567] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90492.691699] (2)[10823:Binder:636_2]early resume of devices complete after
5.071 msecs
<5>[90492.692144] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90492.694213] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90492.694548] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90492.694590] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1594 us
<5>[90492.694868] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90492.695481] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90492.695509] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90492.695591] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90492.695623] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90492.695714] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90492.695909] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90492.695964] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90492.695987] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90492.696071] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90492.696114] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90492.696237] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90492.696262] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90492.696276] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90492.696418] (2)[10823:Binder:636_2]zcvf, no update time:46 96 avgc:0
avgc_thread
<5>[90492.696447] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90492.699740] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90492.700852] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90492.700949] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90492.701267] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90492.701472] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90492.702158] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90492.702311] (2)[7306:kworker/2:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90492.704194] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90492.704779] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90492.705633] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90492.706067] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90492.706171] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90492.709075] (3)[10823:Binder:636_2]resume of devices complete after 17.343
msecs
<6>[90492.713727] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90492.713751] (3)[2356:kworker/3:5]Restarting tasks ...
<3>[90492.713825] (3)[2356:kworker/3:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90492.713861] (3)[2356:kworker/3:5][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90492.714602] (3)[2356:kworker/3:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90492.714624] (3)[2356:kworker/3:5][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90492.721222] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90492.721235] (0)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90492.722272] (3)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90492.725611] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218125475000000
<6>[90492.727250] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90492.734584] done.
<5>[90492.734620] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90492.734639] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90492.738369] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90492.741990] (0)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202849,16218,23199scp1 sleep state: 54903,23436,23436
<6>[90492.742025] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90492.742025]
<5>[90492.742038] (0)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90492.742049] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90492.742068] -(0)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90492.742081] (0)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90492.743046] (0)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90492.743456] -(6)[404:EEM_CTRL_B][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90492.743989] (0)[10823:Binder:636_2]log_store can't open expdb file: -13.
<36>[90492.744010] (3)[576:logd.auditd]type=1400 audit(1671083375.340:1623238):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<4>[90492.744035] (0)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:49:35.345840491 UTC
<6>[90492.744320] (0)[30807:kworker/0:5][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/0:5><0x7857>
<6>[90492.744397] (0)[30807:kworker/0:5]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90492.744409] (0)[30807:kworker/0:5]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90492.744444] (0)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90492.744455] (0)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90492.744470] (0)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90492.746745] (0)[10823:Binder:636_2]PM: suspend exit
<5>[90492.748340] -(4)[1893:AlarmManager]alarmtimer_enqueue, 218125475000000
<5>[90492.751973] -(2)[1454:system_server]alarmtimer_enqueue, 218125475000000
<6>[90492.775496] (6)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(103)
<3>[90492.794503] (2)[7306:kworker/2:3]typec_cc_orientation = 2
<6>[90492.847989] (0)[10823:Binder:636_2]active wakeup source: main
<6>[90492.848037] (0)[10823:Binder:636_2]active wakeup source: usb
<6>[90492.848085] (0)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90492.900226] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90492.955009] (2)[7306:kworker/2:3]chg_type = 0, hvdcp_type = 0
<6>[90493.002560] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90493.052836] (2)[7306:kworker/2:3]get_connector_temp: connector_temp:338
<6>[90493.052903] (2)[7306:kworker/2:3][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90493.052975] (2)[7306:kworker/2:3]mt_charger_plugin plugin:0
<5>[90493.074023] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90493.074110] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90493.074151] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90493.074173] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90493.278954] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90493.279004] (2)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90493.279299] (2)[23444:kworker/u16:7]PM: ++
<7>[90493.288662] (2)[23444:kworker/u16:7]PM: --
<4>[90493.373131] -(4)[0:swapper/4][name:bc&]tick broadcast enter counter cpu: 695,
672, 593, 599, 289, 208, 181, 80, success counter cpu: 78, 149, 90, 114, 35, 21,
26, 4, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 132, 218,
170, 172, 65, 36, 31, 3, o: 2-3,5-7, p: , f: , t: 90493500000000, 90493500000000,
90493506980465, 90493584352392, 90493504000000, 90493856712697, 90493852000000,
90493788000000,
<4>[90493.390089] done.
<6>[90493.394892] (5)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10202877,16228,23218scp1 sleep state: 54905,23436,23436
<6>[90493.394924] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90493.394924]
<6>[90493.394937] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90493.394937]
<6>[90493.394947] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90493.394947]
<6>[90493.394956] (5)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90493.394956]
<5>[90493.394966] (5)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90493.394976] (5)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90493.394998] (5)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90493.395028] (5)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90493.395245] (5)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90493.395262] (5)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:49:35.997087645 UTC
<6>[90493.395360] (5)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90493.395389] (5)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90493.395402] (5)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90493.395415] (1)[613:teei_daemon]Freezing user space processes ...
<5>[90493.395795] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90493.396376] (6)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90493.396402] (6)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90493.406593] (elapsed 0.011 seconds) done.
<6>[90493.406619] (5)[10823:Binder:636_2]OOM killer disabled.
<6>[90493.406630] (5)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.003 seconds) done.
<3>[90493.452232] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:338
<3>[90493.452288] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90493.452365] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90493.454039] (0)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90493.454423] (0)[23444:kworker/u16:7]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<3>[90493.454521] (2)[19178:kworker/u16:2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<5>[90493.454626] (2)[19178:kworker/u16:2]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90493.454651] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90493.454666] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90493.455516] (0)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90493.456678] (0)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<3>[90493.456710] (2)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90493.456766] (0)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<6>[90493.457189] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90493.457217] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90493.457247] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90493.458317] (1)[10823:Binder:636_2]alarmtimer_suspend convert
218125475000000 to 2022/12/15 05:49:59 (now = 2022/12/15 05:49:35)
<5>[90493.458439] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:50:00 (1)
<5>[90493.461981] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90493.462437] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90493.462477] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90493.462488] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90493.462606] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90493.462650] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90493.462701] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90493.462701]
<6>[90493.462724] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90493.462724]
<6>[90493.462746] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90493.462746]
<6>[90493.462768] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90493.462768]
<6>[90493.462890] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90493.462933] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90493.462957] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90493.463665] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90493.463754] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90493.463994] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90493.464369] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90493.464392] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90493.464868] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90493.464887] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90493.465412] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90493.465724] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,850 us
<6>[90493.466617] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90493.466931] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90493.467066] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90493.467500] (1)[10823:Binder:636_2]suspend of devices complete after 56.277
msecs
<6>[90493.473439] (1)[10823:Binder:636_2]late suspend of devices complete after
5.908 msecs
<4>[90493.473467] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90493.478183]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90493.478841] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90493.479186] (0)[7405:kworker/u16:10]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90493.479853] (1)[10823:Binder:636_2]noirq suspend of devices complete after
5.625 msecs
<6>[90493.479936] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90493.479936] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90493.479936] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<5>[90493.480019] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90493.480019] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90493.480019] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 792681, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x3e1360b3, wlk_cntcv_h = 0x294, 26M_off_pct =
92
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 24.190 seconds
<4>[90493.480019] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90493.480019] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90493.480019] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90493.480019] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90493.480019] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90493.480019] -(1)[0:swapper/1]Call trace:
<4>[90493.480019] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90493.480019] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90493.480019] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90493.480019] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90493.480019] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90493.480019] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90493.480019] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90493.480019] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90493.480019] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90493.480019] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90493.480019] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90493.480019] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90493.480019] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90493.480019] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90493.480019] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90493.480019] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90493.480019] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90493.480019] -(1)[0:swapper/1]---[ end trace 308173880bd0bfa0 ]---
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 728624 (32k)
<4>[90493.480019] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 22.235/23.901/23.844/22.862/23.3897 seconds
<6>[90493.480019] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90493.480019] -(1)[0:swapper/1]EINT 222 is pending
<6>[90493.480160] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x40000, 0x80000, 0x0)
<6>[90493.480206] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90493.480178] -(1)[0:swapper/1]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90493.482135] (0)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_resume
<5>[90493.483266]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90493.483293] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90493.485352] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90493.491143] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.161 msecs
<6>[90493.491413] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90493.491541] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90493.491651] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90493.491692] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90493.491769] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90493.491795] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90493.496936] (2)[10823:Binder:636_2]early resume of devices complete after
5.079 msecs
<5>[90493.497455] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90493.499453] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90493.499760] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90493.499801] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1634 us
<5>[90493.500082] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90493.500640] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90493.500668] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90493.500751] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90493.500783] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90493.500872] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90493.501066] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90493.501129] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90493.501151] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90493.501235] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90493.501345] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90493.501473] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90493.501498] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90493.501512] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90493.501654] (2)[10823:Binder:636_2]zcvf, no update time:71 96 avgc:0
avgc_thread
<5>[90493.501682] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90493.504295] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90493.505416] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90493.505518] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90493.505831] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90493.505867] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90493.506553] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90493.506698] (2)[23427:kworker/2:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90493.508777] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90493.509094] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90493.510073] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90493.511259] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90493.511499] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90493.515023] (1)[10823:Binder:636_2]resume of devices complete after 18.054
msecs
<3>[90493.521108] (1)[7388:kworker/1:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90493.521133] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90493.521919] (1)[7388:kworker/1:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90493.521941] (1)[7388:kworker/1:3][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<6>[90493.522146] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90493.522163] (3)[576:logd.auditd]Restarting tasks ...
<36>[90493.526207] (3)[576:logd.auditd]type=1400 audit(1671083375.992:1623239):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90493.530589] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90493.530819] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90493.531505] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90493.540257] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218126325000000
<4>[90493.545405] done.
<5>[90493.545439] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90493.545456] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90493.550052] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90493.551419] (4)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10203984,16507,23519scp1 sleep state: 54907,23436,23436
<6>[90493.551449] (4)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90493.551449]
<5>[90493.551468] (4)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90493.551484] (4)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90493.551506] -(4)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90493.551521] (4)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90493.552512] (4)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90493.553091] -(6)[404:EEM_CTRL_B][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90493.553597] (5)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90493.553646] (5)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:50:00.349824184 UTC
<6>[90493.553820] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90493.553899] (5)[27096:kworker/5:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90493.553909] (5)[27096:kworker/5:3]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90493.553951] (5)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90493.553972] (5)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90493.553991] (5)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<36>[90493.554219] (3)[576:logd.auditd]type=1400 audit(1671083400.348:1623240):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90493.554780] (6)[10823:Binder:636_2]PM: suspend exit
<5>[90493.559434] -(6)[1893:AlarmManager]alarmtimer_enqueue, 218126530000000
<4>[90493.582776] -(6)[1271:app]CPU6: update max cpu_capacity 826
<6>[90493.591681] (6)[7789:droid.ugc.tril]binder: 7789:7789 ioctl 40046210
7fcfc60304 returned -22
<3>[90493.595667] (2)[23427:kworker/2:2]typec_cc_orientation = 2
<4>[90493.606567] -(7)[8758:Binder:1454_1E]CPU7: update max cpu_capacity 934
<6>[90493.609082] -(6)[7033:lowpool[171]][ccci1/dpmaif]tx0_resume_tx: 0x40000,
0x80000, 0x0
<6>[90493.611365] -(6)[7789:droid.ugc.tril][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x80000, 0x0
<6>[90493.656453] (6)[10823:Binder:636_2]active wakeup source: main
<6>[90493.656501] (6)[10823:Binder:636_2]active wakeup source: usb
<6>[90493.656532] (6)[10823:Binder:636_2]active wakeup source: ttyC0
<3>[90493.666746] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90493.700682] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90493.743732] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90493.751718] (2)[23427:kworker/2:2]chg_type = 0, hvdcp_type = 0
<3>[90493.803726] (2)[23427:kworker/2:2]get_connector_temp: connector_temp:339
<6>[90493.803770] (2)[23427:kworker/2:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90493.803802] (2)[23427:kworker/2:2]mt_charger_plugin plugin:0
<6>[90493.856765] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90493.948781] -(2)[7789:droid.ugc.trill][ccci1/dpmaif]tx1_resume_tx: 0x40000,
0x80000, 0x0
<6>[90493.948859] -(0)[7822:default_npth_th][ccci1/dpmaif]clear txq1_resume_done:
0x40000, 0x40000, 0x0
<6>[90494.027019] (0)[7841:tp-io-9]binder: 7789:7841 ioctl 40046210 78b40db2d4
returned -22
<6>[90494.254435] (0)[1888:CachedAppOptimi]stop reclaim: force
<6>[90494.557841] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90494.603036] (2)[23427:kworker/2:2][bq27z561] fg_update_status:
SOC:59,Volt:3936,Cur:307,Temp:349,RM:2230,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90494.603149] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90494.604188] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90494.604689] (7)[118:pd_dbg_info]///PD dbg info 128d
<5>[90494.604706] (7)[118:pd_dbg_info]<90494.604>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90494.604706] <90494.604>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90494.610756] (2)[7306:kworker/2:3]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<6>[90494.747794] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90494.979148] -(4)[3662:WifiScanningSer]alarmtimer_enqueue: 6 callbacks
suppressed
<5>[90494.979160] -(4)[3662:WifiScanningSer]alarmtimer_enqueue, 218131644000000
<5>[90495.017443] -(5)[4944:Binder:1454_13]alarmtimer_enqueue, 218246930000000
<5>[90495.017791] -(5)[4944:Binder:1454_13]alarmtimer_enqueue, 218246930000000
<5>[90495.074430] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90495.074519] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90495.074649] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90495.074694] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90495.075126] (2)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90495.230331] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 792681, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90495.230471] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90495.582647] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90495.752721] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90495.837647] (1)[7388:kworker/1:3]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90495.837943] (1)[7387:kworker/1:2]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<3>[90495.839866] (1)[7388:kworker/1:3]ghr: scsi_execute exit ret = 0x0
<3>[90495.839944] (1)[7387:kworker/1:2]ghr: scsi_execute exit ret = 0x0
<6>[90496.605754] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90496.760193] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90496.998798] -(0)[0:swapper/0]lvts_paused = 1
<5>[90497.075140] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90497.075241] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90497.075298] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90497.075341] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<3>[90497.103756] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90497.201745] -(1)[5436:Binder:1454_17]alarmtimer_enqueue, 218135172000000
<6>[90497.204298] (1)[10823:Binder:636_2]last active wakeup source: sync_time
<5>[90497.255911] -(2)[0:swapper/2]lvts_paused = 1
<6>[90497.304874] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90497.304917] (1)[23444:kworker/u16:7]PM: Syncing filesystems ...
<7>[90497.305038] (1)[23444:kworker/u16:7]PM: ++
<7>[90497.356047] (1)[23444:kworker/u16:7]PM: --
<4>[90497.409622] done.
<6>[90497.415308] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10204237,16721,23755scp1 sleep state: 54909,23438,23438
<6>[90497.415346] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90497.415346]
<6>[90497.415370] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90497.415370]
<6>[90497.415392] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90497.415392]
<6>[90497.415414] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90497.415414]
<5>[90497.415436] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90497.415453] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90497.415487] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90497.415516] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90497.415855] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90497.415889] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:50:04.212080492 UTC
<6>[90497.416067] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90497.416125] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90497.416151] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90497.416174] (2)[576:logd.auditd]Freezing user space processes ...
<36>[90497.416346] (2)[576:logd.auditd]type=1400 audit(1671083404.208:1623241):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90497.417534] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90497.419072] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90497.419101] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90497.442299] (elapsed 0.026 seconds) done.
<6>[90497.442337] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90497.442358] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90497.498778] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:339
<3>[90497.498829] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90497.498896] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90497.500228] (1)[23444:kworker/u16:7]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90497.502365] (1)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90497.502689] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90497.502807] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90497.502846] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90497.503635] (3)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90497.504909] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90497.504946] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90497.504975] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90497.505793] (3)[10823:Binder:636_2]alarmtimer_suspend convert
218135172000000 to 2022/12/15 05:50:09 (now = 2022/12/15 05:50:04)
<5>[90497.505914] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:50:10 (1)
<5>[90497.509565] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90497.509997] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90497.510034] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90497.510044] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90497.510151] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90497.510193] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90497.510239] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90497.510239]
<6>[90497.510261] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90497.510261]
<6>[90497.510283] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90497.510283]
<6>[90497.510305] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90497.510305]
<6>[90497.510430] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90497.510472] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90497.510496] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90497.511084] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90497.511164] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90497.511382] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90497.511702] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90497.511724] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90497.512116] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90497.512134] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90497.512590] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90497.512915] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,793 us
<6>[90497.513747] (3)[10823:Binder:636_2][DVFSRC] V:600000, F_OPP:32, RG:00000080,
00000000, 00000000, 0002000e
<6>[90497.514028] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90497.514156] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90497.514552] (3)[10823:Binder:636_2]suspend of devices complete after 57.560
msecs
<6>[90497.520028] (3)[10823:Binder:636_2]late suspend of devices complete after
5.447 msecs
<4>[90497.520055] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90497.524540]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90497.525166] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90497.525579] (1)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90497.526224] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.348 msecs
<6>[90497.526307] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90497.526307] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90497.526307] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90497.526381] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90497.526381] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90497.526381] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90497.526381] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90497.526381] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90497.526381] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 194966, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x45d30517, wlk_cntcv_h = 0x294, 26M_off_pct =
71
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 5.949 seconds
<4>[90497.526381] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90497.526381] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90497.526381] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90497.526381] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90497.526381] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90497.526381] -(3)[0:swapper/3]Call trace:
<4>[90497.526381] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90497.526381] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90497.526381] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90497.526381] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90497.526381] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90497.526381] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90497.526381] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90497.526381] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90497.526381] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90497.526381] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90497.526381] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90497.526381] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90497.526381] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90497.526381] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90497.526381] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90497.526381] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90497.526381] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90497.526381] -(3)[0:swapper/3]---[ end trace 308173880bd0bfa1 ]---
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 132722 (32k)
<4>[90497.526381] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 4.050/6.510/6.508/4.509/6.6508 seconds
<6>[90497.526381] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90497.526381] -(3)[0:swapper/3]EINT 222 is pending
<6>[90497.526523] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90497.526567] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90497.526540] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90497.528324] (1)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90497.529934]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90497.529961] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90497.531891] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90497.537834] (2)[10823:Binder:636_2]noirq resume of devices complete after
10.415 msecs
<6>[90497.538101] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90497.538232] -(1)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90497.538327] -(1)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90497.538365] (1)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90497.538534] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90497.538561] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90497.543682] (2)[10823:Binder:636_2]early resume of devices complete after
5.059 msecs
<5>[90497.544114] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90497.546139] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90497.546428] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90497.546468] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1496 us
<5>[90497.546739] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90497.547382] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90497.547409] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90497.547492] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90497.547524] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90497.547614] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90497.547808] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90497.547865] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90497.547888] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90497.547972] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90497.548014] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90497.548139] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90497.548165] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90497.548178] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90497.548326] (2)[10823:Binder:636_2]zcvf, no update time:81 96 avgc:0
avgc_thread
<5>[90497.548354] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90497.551646] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90497.552747] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90497.552841] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90497.553173] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90497.553208] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90497.553895] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90497.554054] (2)[30082:kworker/2:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90497.556286] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90497.556815] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90497.557708] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90497.558413] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90497.558991] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90497.561419] (0)[10823:Binder:636_2]resume of devices complete after 17.702
msecs
<3>[90497.567790] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90497.567820] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90497.568585] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90497.568610] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90497.568844] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90497.568865] (2)[1314:receiver]Restarting tasks ...
<6>[90497.577552] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90497.578117] (4)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90497.578287] (3)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90497.589602] done.
<5>[90497.589632] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90497.589643] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90497.593340] (3)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<12>[90497.595694] (1)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<12>[90497.595762] (1)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<6>[90497.596430] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10204489,16789,23844scp1 sleep state: 54911,23440,23440
<6>[90497.596454] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90497.596454]
<5>[90497.596466] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90497.596475] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90497.596493] -(3)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90497.596504] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90497.597407] -(6)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90497.599268] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90497.599903] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90497.599941] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:50:10.349750723 UTC
<6>[90497.600120] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90497.600187] (3)[7406:kworker/3:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<36>[90497.600195] (2)[576:logd.auditd]type=1400 audit(1671083410.344:1623242):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90497.600206] (3)[7406:kworker/3:2]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90497.600219] (3)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90497.600234] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90497.600252] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90497.600265] (3)[10823:Binder:636_2]PM: suspend exit
<12>[90497.600596] (5)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<5>[90497.605967] -(6)[1893:AlarmManager]alarmtimer_enqueue, 218246930000000
<12>[90497.613238] (5)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<12>[90497.613358] (5)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<12>[90497.618239] (7)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<3>[90497.621786] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<12>[90497.622524] (5)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<12>[90497.622565] (5)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<12>[90497.626123] (7)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<12>[90497.630460] (6)[853:[email protected]]healthd: battery l=59 v=3935 t=34.9 h=2
st=3 c=33 fc=4110000 cc=670 chg=
<3>[90497.645371] (2)[30082:kworker/2:1]typec_cc_orientation = 2
<6>[90497.701801] (3)[10823:Binder:636_2]active wakeup source: main
<6>[90497.701845] (3)[10823:Binder:636_2]active wakeup source: usb
<6>[90497.751521] (2)[23427:kworker/2:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90497.769223] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90497.803395] (2)[30082:kworker/2:1]chg_type = 0, hvdcp_type = 0
<6>[90497.854183] (2)[23427:kworker/2:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<4>[90497.885664] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90497.885717] -(4)[7032:kworker/4:0]active wake lock : main,last_time:90497684
<4>[90497.885728] -(4)[7032:kworker/4:0]active wake lock : usb,last_time:90497683
<3>[90497.905548] (2)[30082:kworker/2:1]get_connector_temp: connector_temp:340
<6>[90497.905800] (2)[30082:kworker/2:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90497.906088] (2)[30082:kworker/2:1]mt_charger_plugin plugin:0
<5>[90497.939832] -(1)[4944:Binder:1454_13]alarmtimer_enqueue, 218246930000000
<4>[90498.380232] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 521,
627, 521, 544, 460, 357, 303, 367, success counter cpu: 115, 114, 74, 66, 69, 48,
44, 68, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 204, 202,
165, 135, 105, 69, 66, 78, o: 0,2-7, p: , f: , t: 90498509736238, 90498515247392,
90498524000000, 90498684000000, 90498780000000, 90498972000000, 90498524000000,
90498768332314,
<6>[90498.621516] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90498.658370] (0)[915:HwBinder:896_2][bq27z561] fg_update_status:
SOC:59,Volt:3935,Cur:62,Temp:349,RM:2229,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90498.778448] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90499.075855] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90499.075959] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90499.076020] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90499.076063] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90499.645652] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90499.786685] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90499.933393] (2)[296:hang_detect][Hang_Detect] hang_detect thread counts down
10:10, status 1.
<5>[90499.933590] (0)[30807:kworker/0:5]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90499.933933] (0)[30822:kworker/0:7]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<3>[90499.935837] (0)[30807:kworker/0:5]ghr: scsi_execute exit ret = 0x0
<3>[90499.935903] (0)[30822:kworker/0:7]ghr: scsi_execute exit ret = 0x0
<6>[90500.505397] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 194966, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767ff, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90500.505485] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90500.669715] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90500.701367] (1)[0:swapper/1][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90500.795537] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90501.042428] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90501.076328] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90501.076497] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90501.076565] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90501.076608] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90501.077357] (2)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90501.139503] -(3)[1495:Binder:1454_2]alarmtimer_enqueue, 218145063000000
<6>[90501.142601] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90501.142632] (2)[6931:kworker/u16:8]PM: Syncing filesystems ...
<7>[90501.142739] (2)[6931:kworker/u16:8]PM: ++
<7>[90501.155695] (0)[6931:kworker/u16:8]PM: --
<4>[90501.249740] done.
<6>[90501.256565] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10204731,17012,24090scp1 sleep state: 54913,23440,23440
<6>[90501.256599] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90501.256599]
<6>[90501.256624] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90501.256624]
<6>[90501.256648] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90501.256648]
<6>[90501.256670] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90501.256670]
<5>[90501.256692] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90501.256711] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90501.256752] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90501.256782] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90501.257195] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<36>[90501.257621] (0)[576:logd.auditd]type=1400 audit(1671083414.000:1623243):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<4>[90501.257757] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:50:14.007577723 UTC
<6>[90501.257915] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90501.257975] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90501.258345] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90501.258374] (4)[613:teei_daemon]Freezing user space processes ...
<5>[90501.260175] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90501.261127] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90501.261166] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90501.285808] (elapsed 0.027 seconds) done.
<6>[90501.285847] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90501.285867] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90501.344417] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:340
<3>[90501.344465] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90501.344534] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90501.346037] (0)[6931:kworker/u16:8]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90501.346635] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90501.346748] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90501.346784] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90501.347714] (0)[6931:kworker/u16:8][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90501.348101] (0)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<6>[90501.349140] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90501.349170] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90501.349199] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90501.350026] (3)[10823:Binder:636_2]alarmtimer_suspend convert
218145063000000 to 2022/12/15 05:50:18 (now = 2022/12/15 05:50:13)
<5>[90501.350147] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:50:19 (1)
<5>[90501.353685] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90501.354220] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90501.354257] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90501.354268] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90501.354376] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90501.354417] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90501.354461] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90501.354461]
<6>[90501.354483] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90501.354483]
<6>[90501.354505] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90501.354505]
<6>[90501.354527] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90501.354527]
<6>[90501.354642] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90501.354683] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90501.354706] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90501.355315] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90501.355398] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90501.355626] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90501.355982] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90501.356004] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90501.356420] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90501.356439] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90501.356882] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90501.357222] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,794 us
<6>[90501.358173] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90501.358459] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90501.358582] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90501.358981] (3)[10823:Binder:636_2]suspend of devices complete after 58.366
msecs
<6>[90501.364787] (3)[10823:Binder:636_2]late suspend of devices complete after
5.775 msecs
<4>[90501.364814] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90501.370617]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90501.371311] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90501.371706] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90501.372534] (3)[10823:Binder:636_2]noirq suspend of devices complete after
6.946 msecs
<6>[90501.372606] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90501.372606] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90501.372606] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<6>[90501.372684] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90501.372684] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90501.372684] -(3)[0:swapper/3][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90501.372684] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90501.372684] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90501.372684] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 168754, r13 = 0x84000880, debug_flag = 0xf8061bff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24747ff, req_sta = 0x3c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x4ccc4c4c, wlk_cntcv_h = 0x294, 26M_off_pct =
81
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 5.149 seconds
<4>[90501.372684] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90501.372684] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90501.372684] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90501.372684] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90501.372684] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90501.372684] -(3)[0:swapper/3]Call trace:
<4>[90501.372684] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90501.372684] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90501.372684] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90501.372684] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90501.372684] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90501.372684] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90501.372684] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90501.372684] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90501.372684] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90501.372684] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90501.372684] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90501.372684] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90501.372684] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90501.372684] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90501.372684] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90501.372684] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90501.372684] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90501.372684] -(3)[0:swapper/3]---[ end trace 308173880bd0bfa2 ]---
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 97352 (32k)
<4>[90501.372684] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 2.970/3.877/3.858/3.215/3.3877 seconds
<6>[90501.372684] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90501.372684] -(3)[0:swapper/3]EINT 222 is pending
<6>[90501.372827] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90501.372872] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90501.372842] -(3)[0:swapper/3]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90501.375158] (3)[7608:kworker/u16:11]mtu3_phone musb-hdrc: mtu3_resume
<5>[90501.376839]
(2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90501.376869] (2)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90501.378914] (2)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90501.384775] (2)[10823:Binder:636_2]noirq resume of devices complete after
11.081 msecs
<6>[90501.385037] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90501.385174] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90501.385299] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90501.385406] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90501.385513] (2)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] mt6359-rtc
<4>[90501.385540] (2)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90501.391456] (2)[10823:Binder:636_2]early resume of devices complete after
5.855 msecs
<5>[90501.391946] (2)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90501.394066] (2)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90501.394361] (2)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90501.394401] (2)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1496 us
<5>[90501.395169] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90501.395551] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90501.395577] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90501.395659] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90501.395691] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90501.395780] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90501.395977] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90501.396036] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90501.396059] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90501.396145] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90501.396186] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90501.396716] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90501.396745] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90501.396759] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90501.396914] (1)[10823:Binder:636_2]zcvf, no update time:90 96 avgc:0
avgc_thread
<5>[90501.396942] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90501.400032] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90501.401086] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90501.401181] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90501.401661] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90501.401696] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90501.402456] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90501.402609] (1)[7390:kworker/1:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90501.404616] (1)[7390:kworker/1:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90501.404935] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90501.405347] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90501.405951] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90501.406085] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90501.409033] (0)[10823:Binder:636_2]resume of devices complete after 17.544
msecs
<6>[90501.413530] (1)[10823:Binder:636_2]OOM killer enabled.
<6>[90501.413554] (0)[30807:kworker/0:5]Restarting tasks ...
<3>[90501.414516] (0)[30807:kworker/0:5]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90501.414560] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90501.415267] (0)[30807:kworker/0:5]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90501.415288] (0)[30807:kworker/0:5][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90501.420287] (3)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90501.420450] (6)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90501.420493] (4)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<4>[90501.431989] done.
<5>[90501.432028] (1)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90501.432045] (1)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90501.434711] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90501.436690] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10204985,17063,24161scp1 sleep state: 54915,23440,23440
<6>[90501.436730] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90501.436730]
<5>[90501.436746] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90501.436758] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90501.436779] -(1)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90501.436793] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90501.437648] -(5)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90501.437940] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90501.438635] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90501.438683] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:50:19.342187260 UTC
<6>[90501.438917] (1)[7388:kworker/1:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:3><0x1cdc>
<6>[90501.438997] (1)[7388:kworker/1:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90501.439011] (1)[7388:kworker/1:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90501.439036] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90501.439045] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90501.439072] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90501.439090] (1)[10823:Binder:636_2]PM: suspend exit
<36>[90501.439134] (0)[576:logd.auditd]type=1400 audit(1671083419.340:1623244):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90501.441013] -(6)[1893:AlarmManager]alarmtimer_enqueue, 218246930000000
<3>[90501.454226] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<3>[90501.495364] (1)[25366:kworker/1:4]typec_cc_orientation = 2
<6>[90501.540702] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90501.540741] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90501.603213] (0)[30822:kworker/0:7]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90501.654743] (1)[25366:kworker/1:4]chg_type = 0, hvdcp_type = 0
<3>[90501.726038] (1)[25366:kworker/1:4]get_connector_temp: connector_temp:340
<6>[90501.726109] (1)[25366:kworker/1:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90501.726180] (1)[25366:kworker/1:4]mt_charger_plugin plugin:0
<6>[90501.779719] (0)[30822:kworker/0:7]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90501.800854] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90502.237594] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90502.461564] (1)[7388:kworker/1:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:3><0x1cdc>
<6>[90502.494082] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:25%
<6>[90502.494200] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90502.494222] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90502.494232] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90502.494246] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90502.494254] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14993)
<6>[90502.494267] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33881,33923380,5520), tx=(13633,2361,11272), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90502.494346] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90502.548837] (1)[915:HwBinder:896_2][bq27z561] fg_update_status:
SOC:59,Volt:3936,Cur:55,Temp:349,RM:2229,FC:4110,FAST:0,ST:2,NAME:bq27z561
<6>[90502.813641] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90503.076858] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90503.076959] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90503.077014] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90503.077056] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<4>[90503.381409] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 721,
602, 595, 600, 214, 90, 85, 33, success counter cpu: 147, 95, 82, 136, 24, 1, 10,
2, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 241, 190, 158,
218, 66, 8, 12, 3, o: 0-1,3-7, p: , f: 2, t: 90503525525623, 90503516000000,
90503508000000, 90503519244700, 90503710430468, 90504020868238, 90503521669392,
90503836000000,
<6>[90503.489146] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<5>[90503.773598] (0)[30822:kworker/0:7]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90503.773951] (0)[25356:kworker/0:1]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<5>[90503.774062] (0)[30807:kworker/0:5]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90503.775871] (0)[30807:kworker/0:5]ghr: scsi_execute exit ret = 0x0
<3>[90503.775938] (0)[25356:kworker/0:1]ghr: scsi_execute exit ret = 0x0
<3>[90503.775990] (0)[30822:kworker/0:7]ghr: scsi_execute exit ret = 0x0
<6>[90503.776044] (0)[30822:kworker/0:7]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90503.776063] (0)[30822:kworker/0:7]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90503.776492] (0)[30822:kworker/0:7]ufshcd bootdevice: rs,ret 0,449 us
<6>[90503.825982] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90503.855263] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x10,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503855245765,15000000]
<6>[90503.855302] (4)[435:wdtk-4][thread:435][RT:90503855293765] 2022-12-15
05:50:21.758827 UTC;android time 2022-12-15 12:50:21.758827
<6>[90503.872966] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x30,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503872947996,14982297]
<6>[90503.872986] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x31,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503872962765,14982283]
<6>[90503.873000] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x33,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503872979073,14982266]
<6>[90503.893482] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0x3b,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503893445458,14961800]
<6>[90503.894373] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xbb,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503894365765,14960880]
<6>[90503.894518] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0xbf,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503894482996,14960762]
<6>[90503.894592] (6)[437:wdtk-6][wdk-k]
cpu=6,lbit=0xff,cbit=0xff,7,1,2667932697,90501257743452,90501438650990,
[90503894578458,14960667]
<6>[90504.029561] (2)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90504.032791] -(3)[7539:kworker/u17:0][ccci1/fsm]received MD status response
97670043
<6>[90504.033042] (2)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<6>[90504.407070] (4)[1656:watchdog]AEEIOCTL_RT_MON_Kick ( 300)
<6>[90504.407104] (4)[1656:watchdog][Hang_Detect] hang_detect enabled 10
<6>[90504.509460] (1)[25366:kworker/1:4][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:4><0x6316>
<6>[90504.541335] (0)[0:swapper/0][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90504.634850] (3)[1888:CachedAppOptimi]stop reclaim: force
<6>[90504.834722] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90504.877068] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90504.998826] -(6)[5024:Binder:1454_15]alarmtimer_enqueue, 218246930000000
<6>[90505.036399] (5)[27096:kworker/5:3]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90505.036440] (5)[27096:kworker/5:3]ufshcd bootdevice: rr,ret 0,1849 us
<5>[90505.045676] -(2)[3755:Binder:1454_7]alarmtimer_enqueue, 218246930000000
<6>[90505.054051] (4)[10823:Binder:636_2]last active wakeup source: ttyC0
<5>[90505.077801] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90505.077900] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90505.077957] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90505.078000] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90505.158344] (0)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90505.158394] (3)[23438:kworker/u16:4]PM: Syncing filesystems ...
<7>[90505.158685] (3)[23438:kworker/u16:4]PM: ++
<7>[90505.169144] (3)[23438:kworker/u16:4]PM: --
<4>[90505.269402] done.
<6>[90505.275834] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10205229,17285,24403scp1 sleep state: 54917,23440,23440
<6>[90505.275869] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90505.275869]
<6>[90505.275894] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90505.275894]
<6>[90505.275917] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90505.275917]
<6>[90505.275939] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90505.275939]
<5>[90505.275962] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90505.275981] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90505.276018] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90505.276048] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<36>[90505.276792] (0)[576:logd.auditd]type=1400 audit(1671083423.176:1623245):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90505.277349] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90505.277387] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:50:23.180910722 UTC
<6>[90505.277575] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90505.277635] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90505.277663] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90505.277687] (1)[613:teei_daemon]Freezing user space processes ...
<5>[90505.279138] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90505.280680] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90505.280711] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90505.287127] -(7)[1569:gsm0710muxd]CPU7: update max cpu_capacity 953
<4>[90505.307895] (elapsed 0.030 seconds) done.
<6>[90505.307947] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90505.307970] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90505.369942] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:340
<3>[90505.369998] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90505.370077] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90505.371586] (0)[7383:kworker/u16:6]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90505.372180] (0)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90505.372308] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90505.372344] (0)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90505.373203] (1)[7383:kworker/u16:6][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90505.373725] (1)[7383:kworker/u16:6]ghr: scsi_execute exit ret = 0x0
<6>[90505.375015] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90505.375045] (0)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90505.375077] (0)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90505.375976] (0)[10823:Binder:636_2]alarmtimer_suspend convert
218166885000000 to 2022/12/15 05:50:41 (now = 2022/12/15 05:50:23)
<5>[90505.376095] (0)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:50:42 (1)
<5>[90505.379069] (0)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90505.379583] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90505.379625] (0)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90505.379637] (0)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90505.379756] (0)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90505.379800] (0)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90505.379848] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90505.379848]
<6>[90505.379870] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90505.379870]
<6>[90505.379892] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90505.379892]
<6>[90505.379914] (0)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90505.379914]
<6>[90505.380035] (0)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90505.380080] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90505.380105] (0)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90505.380782] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90505.380869] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90505.381108] (0)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90505.381561] (0)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90505.381586] (0)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90505.382044] (0)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90505.382064] (0)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90505.382523] (0)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90505.382942] (0)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,893 us
<6>[90505.383859] (0)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90505.384163] (0)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90505.384298] (0)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90505.384748] (0)[10823:Binder:636_2]suspend of devices complete after 59.602
msecs
<6>[90505.390971] (0)[10823:Binder:636_2]late suspend of devices complete after
6.192 msecs
<4>[90505.390999] (0)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90505.397049]
(0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90505.397765] (0)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90505.398143] (0)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90505.398971] (0)[10823:Binder:636_2]noirq suspend of devices complete after
7.189 msecs
<6>[90505.399040] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90505.399040] -(0)[0:swapper/0][name:spm&]NO pll_if_on !!!
<4>[90505.399040] -(0)[0:swapper/0][name:spm&]NO subsys_if_on !!!
<5>[90505.399126] -(0)[0:swapper/0]suspend warning[0m: PG_MD1
<5>[90505.399126] -(0)[0:swapper/0]suspend warning[0m: PG_CONN
<6>[90505.399126] -(0)[0:swapper/0]skip cpu_pm_suspend when s2idle
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][SPM] suspend wake up by
R12_EINT_EVENT_B, timer_out = 621606, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7fb, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x5e9ead0b, wlk_cntcv_h = 0x294, 26M_off_pct =
82
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][SPM] Suspended for 18.969 seconds
<4>[90505.399126] -(0)[0:swapper/0]------------[ cut here ]------------
<4>[90505.399126] -(0)[0:swapper/0]WARNING: CPU: 0 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90505.399126] -(0)[0:swapper/0]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90505.399126] -(0)[0:swapper/0]CPU: 0 PID: 0 Comm: swapper/0 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90505.399126] -(0)[0:swapper/0]Hardware name: MT6891Z/CZA (DT)
<4>[90505.399126] -(0)[0:swapper/0]Call trace:
<4>[90505.399126] -(0)[0:swapper/0] dump_backtrace+0x0/0x1b4
<4>[90505.399126] -(0)[0:swapper/0] show_stack+0x14/0x1c
<4>[90505.399126] -(0)[0:swapper/0] dump_stack+0xd4/0x10c
<4>[90505.399126] -(0)[0:swapper/0] __warn+0xdc/0x168
<4>[90505.399126] -(0)[0:swapper/0] warn_slowpath_null+0x1c/0x24
<4>[90505.399126] -(0)[0:swapper/0] getnstimeofday64+0x120/0x128
<4>[90505.399126] -(0)[0:swapper/0] mt6885_show_message+0xcf8/0xe28
<4>[90505.399126] -(0)[0:swapper/0] mt6885_issuer_func+0x38/0x48
<4>[90505.399126] -(0)[0:swapper/0] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90505.399126] -(0)[0:swapper/0] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90505.399126] -(0)[0:swapper/0] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90505.399126] -(0)[0:swapper/0] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90505.399126] -(0)[0:swapper/0] mtk_idle_state_enter+0xbc/0xd0
<4>[90505.399126] -(0)[0:swapper/0] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90505.399126] -(0)[0:swapper/0] do_idle+0x12c/0x2b0
<4>[90505.399126] -(0)[0:swapper/0] cpu_startup_entry+0x20/0x24
<4>[90505.399126] -(0)[0:swapper/0] rest_init+0xd0/0xdc
<4>[90505.399126] -(0)[0:swapper/0] start_kernel+0x43c/0x4c0
<4>[90505.399126] -(0)[0:swapper/0]---[ end trace 308173880bd0bfa3 ]---
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][SPM] md_slp_duration = 493329 (32k)
<4>[90505.399126] -(0)[0:swapper/0][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 15.055/18.135/18.106/16.095/18.8131 seconds
<6>[90505.399126] -(0)[0:swapper/0]skip cpu_pm_resume when s2idle
<6>[90505.399126] -(0)[0:swapper/0]EINT 222 is pending
<6>[90505.399265] -(0)[0:swapper/0][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90505.399310] -(0)[0:swapper/0]i2c no need switch top pll
<4>[90505.399283] -(0)[0:swapper/0]pm_system_irq_wakeup: 244 triggered mt6358-irq
<6>[90505.401322] (0)[23438:kworker/u16:4]mtu3_phone musb-hdrc: mtu3_resume
<5>[90505.402534]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90505.402825] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90505.404798] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90505.410921] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.885 msecs
<6>[90505.411172] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90505.411286] -(0)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90505.411382] -(0)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90505.411422] (0)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<6>[90505.411526] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
mt6359-rtc
<4>[90505.411551] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90505.416966] (1)[10823:Binder:636_2]early resume of devices complete after
5.353 msecs
<5>[90505.417613] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90505.419653] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90505.419969] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90505.420010] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1565 us
<5>[90505.420285] (1)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90505.420803] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90505.420831] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90505.420914] (1)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90505.420946] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90505.421034] (1)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90505.421304] (1)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90505.421362] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90505.421386] (1)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90505.421469] (1)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90505.421512] (1)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90505.421630] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90505.421656] (1)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90505.421669] (1)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90505.421838] (1)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90505.424750] (1)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90505.425925] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90505.426018] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90505.426326] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90505.426361] (1)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90505.427027] (1)[7388:kworker/1:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90505.427191] (1)[7387:kworker/1:2][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90505.429504] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90505.430773] (1)[7387:kworker/1:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90505.431467] (1)[25366:kworker/1:4][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90505.431682] (1)[7386:kworker/1:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90505.432249] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90505.434688] (2)[10823:Binder:636_2]resume of devices complete after 17.688
msecs
<3>[90505.440891] (2)[23427:kworker/2:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90505.440920] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90505.441442] (0)[10823:Binder:636_2]OOM killer enabled.
<6>[90505.441469] (2)[23427:kworker/2:2]Restarting tasks ...
<3>[90505.442112] (2)[23427:kworker/2:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90505.442145] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90505.449203] (5)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90505.449788] (2)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90505.449939] (2)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<5>[90505.450425] -(3)[1893:AlarmManager]alarmtimer_enqueue, 218246930000000
<5>[90505.459600] -(2)[30622:bt_hci_thread]alarmtimer_enqueue, 218176512000000
<4>[90505.463953] done.
<5>[90505.463977] (0)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90505.463988] (0)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90505.464941] -(7)[30648:bt_main_thread]alarmtimer_enqueue, 218727855000000
<12>[90505.468524] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<12>[90505.468583] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<5>[90505.470369] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<12>[90505.473143] (2)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<6>[90505.477421] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10206067,17495,24640scp1 sleep state: 54919,23440,23440
<6>[90505.477445] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90505.477445]
<5>[90505.477457] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90505.477466] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90505.477484] -(1)[10823:Binder:636_2]Resume caused by IRQ 557, mt6358-rtc
<5>[90505.477495] (1)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<12>[90505.477738] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<12>[90505.477777] (5)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<5>[90505.478458] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90505.478607] -(5)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90505.479118] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90505.479157] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:50:42.356246414 UTC
<6>[90505.479326] (1)[7388:kworker/1:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/1:3><0x1cdc>
<36>[90505.479381] (2)[576:logd.auditd]type=1400 audit(1671083442.352:1623246):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90505.479393] (1)[7388:kworker/1:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90505.479399] (1)[7388:kworker/1:3]conn_pwr_core_resume bt=0, FM=0, GPS=0, Wi-
Fi=0
<6>[90505.479424] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90505.479434] (1)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90505.479446] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90505.482722] (1)[10823:Binder:636_2]PM: suspend exit
<12>[90505.485764] (4)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<12>[90505.491737] (6)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<12>[90505.491787] (6)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<12>[90505.495427] (6)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<12>[90505.499390] (6)[853:[email protected]]healthd: battery l=59 v=3937 t=34.9 h=2
st=3 c=26 fc=4110000 cc=670 chg=
<3>[90505.521790] (1)[25366:kworker/1:4]typec_cc_orientation = 2
<6>[90505.583930] (1)[10823:Binder:636_2]active wakeup source: main
<6>[90505.583979] (1)[10823:Binder:636_2]active wakeup source: usb
<6>[90505.584028] (1)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90505.597307] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 621606, r13 = 0x84000880, debug_flag = 0xf80618ff
0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7fb, req_sta = 0x1c00000 0x0
0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x310000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90505.597346] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<3>[90505.627846] (1)[25366:kworker/1:4]chg_type = 0, hvdcp_type = 0
<3>[90505.674958] (1)[25366:kworker/1:4]get_connector_temp: connector_temp:341
<6>[90505.675432] (1)[25366:kworker/1:4][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90505.676104] (1)[25366:kworker/1:4]mt_charger_plugin plugin:0
<6>[90505.728149] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90505.833046] (1)[7386:kworker/1:0]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90505.839231] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90506.017308] (3)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90506.017354] (2)[7405:kworker/u16:10]PM: Syncing filesystems ...
<7>[90506.017631] (2)[7405:kworker/u16:10]PM: ++
<7>[90506.027290] (1)[7405:kworker/u16:10]PM: --
<4>[90506.125612] done.
<6>[90506.131606] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10206096,17502,24658scp1 sleep state: 54921,23440,23440
<6>[90506.131649] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90506.131649]
<6>[90506.131673] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90506.131673]
<6>[90506.131695] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90506.131695]
<6>[90506.131717] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90506.131717]
<5>[90506.131740] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90506.131758] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90506.131794] (3)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90506.131824] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90506.132108] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90506.132143] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:50:43.009244875 UTC
<6>[90506.132329] (3)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90506.132387] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90506.132415] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90506.132440] (1)[576:logd.auditd]Freezing user space processes ...
<36>[90506.132641] (1)[576:logd.auditd]type=1400 audit(1671083443.004:1623247):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90506.133967] (0)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90506.135535] (2)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90506.135566] (2)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90506.162439] (elapsed 0.029 seconds) done.
<6>[90506.162481] (3)[10823:Binder:636_2]OOM killer disabled.
<6>[90506.162502] (3)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90506.222513] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:341
<3>[90506.222570] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90506.222648] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90506.224226] (1)[7405:kworker/u16:10]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90506.224303] (3)[2328:kworker/u16:1]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90506.224387] (2)[25368:kworker/u16:9]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90506.225090] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90506.225300] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90506.225337] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90506.226539] (2)[25368:kworker/u16:9]ghr: scsi_execute exit ret = 0x0
<3>[90506.226558] (1)[7405:kworker/u16:10]ghr: scsi_execute exit ret = 0x0
<3>[90506.226608] (3)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90506.226676] (1)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<6>[90506.228106] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90506.228145] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90506.228176] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90506.229012] (1)[10823:Binder:636_2]alarmtimer_suspend convert
218246930000000 to 2022/12/15 05:52:00 (now = 2022/12/15 05:50:42)
<5>[90506.229128] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:52:01 (1)
<5>[90506.232831] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90506.233344] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90506.233386] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90506.233397] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90506.233514] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90506.233556] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90506.233602] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90506.233602]
<6>[90506.233625] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90506.233625]
<6>[90506.233647] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90506.233647]
<6>[90506.233669] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90506.233669]
<6>[90506.233791] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90506.233835] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90506.233859] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90506.234562] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90506.234650] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90506.234885] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90506.235274] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90506.235297] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90506.235802] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90506.235821] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90506.236301] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90506.236627] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,820 us
<6>[90506.237556] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90506.237862] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90506.237996] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90506.238433] (1)[10823:Binder:636_2]suspend of devices complete after 58.507
msecs
<6>[90506.244191] (1)[10823:Binder:636_2]late suspend of devices complete after
5.727 msecs
<4>[90506.244218] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90506.249019]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90506.249882] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90506.250231] (2)[25368:kworker/u16:9]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90506.250897] (1)[10823:Binder:636_2]noirq suspend of devices complete after
5.891 msecs
<6>[90506.250980] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90506.250980] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90506.250980] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<5>[90506.251063] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90506.251063] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90506.251063] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 1902721, r13 = 0x84000880, debug_flag =
0xf80618ff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7fb, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0x8c46b9ab, wlk_cntcv_h = 0x294, 26M_off_pct =
95
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 58.066 seconds
<4>[90506.251063] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90506.251063] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90506.251063] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90506.251063] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90506.251063] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90506.251063] -(1)[0:swapper/1]Call trace:
<4>[90506.251063] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90506.251063] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90506.251063] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90506.251063] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90506.251063] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90506.251063] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90506.251063] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90506.251063] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90506.251063] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90506.251063] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90506.251063] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90506.251063] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90506.251063] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90506.251063] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90506.251063] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90506.251063] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90506.251063] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90506.251063] -(1)[0:swapper/1]---[ end trace 308173880bd0bfa4 ]---
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 1802061 (32k)
<4>[90506.251063] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 54.994/57.600/57.600/55.830/57.7600 seconds
<6>[90506.251063] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90506.251189] -(1)[0:swapper/1][SCP] ipi id/type/action/event/reserve =
3/17/6/4/0
<6>[90506.251232] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90506.251275] -(1)[0:swapper/1]i2c no need switch top pll
<6>[90506.252892] (2)[23436:kworker/u16:0]mtu3_phone musb-hdrc: mtu3_resume
<5>[90506.254086]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90506.254368] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90506.256364] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90506.262238] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.251 msecs
<6>[90506.262961] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd]
<4>[90506.262987] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90506.268285] (1)[10823:Binder:636_2]early resume of devices complete after
5.237 msecs
<5>[90506.268838] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90506.271077] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90506.271380] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90506.271418] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1498 us
<5>[90506.272159] (0)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90506.272536] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90506.272562] (0)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90506.272644] (0)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90506.272676] (0)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90506.272766] (0)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90506.272960] (0)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90506.273024] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90506.273047] (0)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90506.273131] (0)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90506.273172] (0)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90506.273368] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90506.273396] (0)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90506.273409] (0)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90506.273557] (0)[10823:Binder:636_2]zcvf, no update time:58 96 avgc:0
avgc_thread
<5>[90506.273586] (0)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90506.276873] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90506.278011] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90506.278104] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90506.278429] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90506.278628] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90506.279316] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90506.279394] (0)[30807:kworker/0:5][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90506.281413] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90506.281804] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90506.282102] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90506.282828] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90506.283398] (0)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90506.286486] (2)[10823:Binder:636_2]resume of devices complete after 18.167
msecs
<3>[90506.292055] (2)[23427:kworker/2:2]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90506.292083] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90506.292833] (2)[23427:kworker/2:2]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90506.292858] (2)[23427:kworker/2:2][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90506.293080] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90506.293103] (5)[1316:vdec_log_info]Restarting tasks ...
<6>[90506.300899] (5)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90506.300933] (7)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90506.300980] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<4>[90506.314437] done.
<5>[90506.314469] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90506.314481] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90506.318376] (3)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90506.319348] (6)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10208676,18149,25325scp1 sleep state: 54923,23440,23440
<6>[90506.319379] (6)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90506.319379]
<5>[90506.319392] (6)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90506.319402] (6)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90506.319419] -(6)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90506.319430] (6)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90506.320171] -(6)[403:EEM_CTRL_BL][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90506.321514] (5)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90506.322253] (5)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90506.322297] (5)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:51:41.269607878 UTC
<6>[90506.322482] (5)[27096:kworker/5:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/5:3><0x69d8>
<6>[90506.322547] (5)[27096:kworker/5:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90506.322557] (5)[27096:kworker/5:3]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90506.322586] (5)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90506.322600] (5)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<36>[90506.322619] (1)[576:logd.auditd]type=1400 audit(1671083501.266:1623248):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90506.322804] (5)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90506.324289] (5)[10823:Binder:636_2]PM: suspend exit
<3>[90506.367801] (0)[3064:kworker/0:0]typec_cc_orientation = 2
<6>[90506.425484] (5)[10823:Binder:636_2]active wakeup source: main
<6>[90506.425515] (5)[10823:Binder:636_2]active wakeup source: usb
<6>[90506.425551] (5)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90506.470552] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<3>[90506.521886] (0)[3064:kworker/0:0]chg_type = 0, hvdcp_type = 0
<3>[90506.575671] (0)[3064:kworker/0:0]get_connector_temp: connector_temp:342
<6>[90506.575722] (0)[3064:kworker/0:0][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90506.575762] (0)[3064:kworker/0:0]mt_charger_plugin plugin:0
<6>[90506.627953] (0)[30807:kworker/0:5]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 33
<6>[90506.673363] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90506.674008] (4)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<5>[90506.690843] -(0)[0:swapper/0]lvts_paused = 1
<6>[90506.848122] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90506.879274] (2)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90506.879326] (3)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90506.879564] (3)[19178:kworker/u16:2]PM: ++
<7>[90506.889443] (3)[19178:kworker/u16:2]PM: --
<4>[90506.985474] done.
<6>[90506.991102] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10208704,18158,25347scp1 sleep state: 54925,23440,23440
<6>[90506.991155] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90506.991155]
<6>[90506.991180] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90506.991180]
<6>[90506.991203] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90506.991203]
<6>[90506.991225] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90506.991225]
<5>[90506.991247] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90506.991266] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90506.991302] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90506.991332] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90506.991693] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90506.991729] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:51:41.939051955 UTC
<6>[90506.991918] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90506.991977] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90506.992005] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90506.992029] (0)[576:logd.auditd]Freezing user space processes ...
<36>[90506.992287] (0)[576:logd.auditd]type=1400 audit(1671083501.934:1623249):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90506.994151] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90506.994880] (1)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90506.994914] (1)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90507.020868] (elapsed 0.028 seconds) done.
<6>[90507.020911] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90507.020933] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90507.077376] (3)[10823:Binder:636_2]get_connector_temp: connector_temp:342
<3>[90507.077432] (3)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90507.077509] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90507.079106] (0)[2328:kworker/u16:1]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90507.079168] (3)[19178:kworker/u16:2]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<5>[90507.079463] (2)[23443:kworker/u16:5]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90507.079984] (3)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90507.080108] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90507.080144] (3)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90507.081003] (3)[19178:kworker/u16:2][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<3>[90507.081189] (3)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90507.081350] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<3>[90507.081422] (2)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<6>[90507.082658] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90507.082683] (3)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90507.082713] (3)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90507.083562] (3)[10823:Binder:636_2]alarmtimer_suspend convert
218246930000000 to 2022/12/15 05:52:00 (now = 2022/12/15 05:51:41)
<5>[90507.083680] (3)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:52:01 (1)
<5>[90507.086551] (3)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90507.087015] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90507.087055] (3)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90507.087066] (3)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90507.087182] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90507.087227] (3)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90507.087280] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90507.087280]
<6>[90507.087303] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90507.087303]
<6>[90507.087325] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90507.087325]
<6>[90507.087348] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90507.087348]
<6>[90507.087475] (3)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90507.087519] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90507.087542] (3)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90507.088223] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90507.088310] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90507.088546] (3)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90507.088930] (3)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90507.088952] (3)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90507.089491] (3)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90507.089513] (3)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90507.089963] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90507.090305] (3)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,810 us
<6>[90507.091169] (3)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90507.091471] (3)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90507.091605] (3)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90507.092042] (3)[10823:Binder:636_2]suspend of devices complete after 53.564
msecs
<6>[90507.097825] (3)[10823:Binder:636_2]late suspend of devices complete after
5.753 msecs
<4>[90507.097853] (3)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90507.102724]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90507.103416] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90507.103772] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90507.104477] (3)[10823:Binder:636_2]noirq suspend of devices complete after
5.854 msecs
<6>[90507.104560] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90507.104560] -(3)[0:swapper/3][name:spm&]NO pll_if_on !!!
<4>[90507.104560] -(3)[0:swapper/3][name:spm&]NO subsys_if_on !!!
<5>[90507.104646] -(3)[0:swapper/3]suspend warning[0m: PG_MD1
<5>[90507.104646] -(3)[0:swapper/3]suspend warning[0m: PG_CONN
<6>[90507.104646] -(3)[0:swapper/3]skip cpu_pm_suspend when s2idle
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][SPM] suspend wake up by
R12_AP2AP_PEER_WAKEUPEVENT_B, timer_out = 627983, r13 = 0xc400f9bc, debug_flag =
0xf80618ff 0x4001e66e, connectivity not sleep, modem not sleep, subsys sleep r12 =
0x4000000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6563fb, req_sta =
0x1c3d0ff 0x180000 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0,
raw_ext_sta = 0x785a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000
0xc38000, req = 0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x9bca5097, wlk_cntcv_h =
0x294, 26M_off_pct = 85
<6>[90507.104646] -(3)[0:swapper/3][ccci1/WK]CCIF RX bitmap:0x0
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][SPM] Suspended for 19.164 seconds
<4>[90507.104646] -(3)[0:swapper/3]------------[ cut here ]------------
<4>[90507.104646] -(3)[0:swapper/3]WARNING: CPU: 3 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90507.104646] -(3)[0:swapper/3]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90507.104646] -(3)[0:swapper/3]CPU: 3 PID: 0 Comm: swapper/3 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90507.104646] -(3)[0:swapper/3]Hardware name: MT6891Z/CZA (DT)
<4>[90507.104646] -(3)[0:swapper/3]Call trace:
<4>[90507.104646] -(3)[0:swapper/3] dump_backtrace+0x0/0x1b4
<4>[90507.104646] -(3)[0:swapper/3] show_stack+0x14/0x1c
<4>[90507.104646] -(3)[0:swapper/3] dump_stack+0xd4/0x10c
<4>[90507.104646] -(3)[0:swapper/3] __warn+0xdc/0x168
<4>[90507.104646] -(3)[0:swapper/3] warn_slowpath_null+0x1c/0x24
<4>[90507.104646] -(3)[0:swapper/3] getnstimeofday64+0x120/0x128
<4>[90507.104646] -(3)[0:swapper/3] mt6885_show_message+0xcf8/0xe28
<4>[90507.104646] -(3)[0:swapper/3] mt6885_issuer_func+0x38/0x48
<4>[90507.104646] -(3)[0:swapper/3] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90507.104646] -(3)[0:swapper/3] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90507.104646] -(3)[0:swapper/3] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90507.104646] -(3)[0:swapper/3] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90507.104646] -(3)[0:swapper/3] mtk_idle_state_enter+0xbc/0xd0
<4>[90507.104646] -(3)[0:swapper/3] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90507.104646] -(3)[0:swapper/3] do_idle+0x12c/0x2b0
<4>[90507.104646] -(3)[0:swapper/3] cpu_startup_entry+0x20/0x24
<4>[90507.104646] -(3)[0:swapper/3] secondary_start_kernel+0x128/0x134
<4>[90507.104646] -(3)[0:swapper/3]---[ end trace 308173880bd0bfa5 ]---
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][SPM] md_slp_duration = 555381 (32k)
<4>[90507.104646] -(3)[0:swapper/3][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 16.948/19.210/19.210/17.234/19.9210 seconds
<6>[90507.104646] -(3)[0:swapper/3]skip cpu_pm_resume when s2idle
<6>[90507.104759] -(3)[0:swapper/3][ccci1/dpmaif]sys_resume need to
restore(0x80000, 0x40000, 0x0)
<6>[90507.104802] -(3)[0:swapper/3]i2c no need switch top pll
<4>[90507.104783] -(3)[0:swapper/3]pm_system_irq_wakeup: 254 triggered DPMAIF_AP
<6>[90507.106571] (0)[2328:kworker/u16:1]mtu3_phone musb-hdrc: mtu3_resume
<5>[90507.107406]
(3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90507.107433] (3)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90507.109450] (3)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90507.114966] (3)[10823:Binder:636_2]noirq resume of devices complete after
9.243 msecs
<6>[90507.115127] -(4)[0:swapper/4][ccci1/dpmaif]wake up by MD0 HIF L2(0/1)(3e0/0)!
<6>[90507.115158] (4)[0:swapper/4][ccci1/dpmaif]DPMA_MD wakeup source:(0/2/0)
<6>[90507.115857] -(3)[10823:Binder:636_2][ccci1/dpmaif]tx1_resume_tx: 0x80000,
0x40000, 0x0
<6>[90507.115944] -(1)[0:swapper/1][ccci1/dpmaif]clear txq1_resume_done: 0x80000,
0x40000, 0x0
<6>[90507.116071] (3)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
[timerfd] ccmni_md1
<4>[90507.116097] (3)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90507.121126] (3)[10823:Binder:636_2]early resume of devices complete after
4.980 msecs
<5>[90507.121759] (3)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90507.123631] (3)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90507.123923] (3)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90507.123962] (3)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1514 us
<5>[90507.124234] (3)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90507.124574] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90507.124599] (3)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90507.124674] (3)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90507.124706] (3)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90507.124787] (3)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90507.124980] (3)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90507.125042] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90507.125065] (3)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90507.125147] (3)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90507.125259] (3)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90507.125384] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90507.125409] (3)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90507.125422] (3)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90507.125564] (3)[10823:Binder:636_2]zcvf, no update time:78 96 avgc:0
avgc_thread
<5>[90507.125590] (3)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90507.129147] (0)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90507.130247] (0)[30807:kworker/0:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90507.130340] (0)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90507.130648] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90507.130682] (0)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90507.131499] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90507.131667] (0)[25356:kworker/0:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90507.134025] (0)[25356:kworker/0:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90507.134324] (0)[30822:kworker/0:7][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90507.134608] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90507.135477] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90507.135575] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90507.138420] (3)[10823:Binder:636_2]resume of devices complete after 17.262
msecs
<3>[90507.143067] (3)[30078:kworker/3:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90507.143095] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<3>[90507.143857] (3)[30078:kworker/3:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90507.143881] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90507.144133] (3)[10823:Binder:636_2]OOM killer enabled.
<6>[90507.144155] (2)[1038:mi_thermald]Restarting tasks ...
<5>[90507.150227] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90507.150302] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90507.150346] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90507.150381] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90507.150502] (0)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90507.151638] (2)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<6>[90507.151714] (6)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90507.155618] (7)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x534]=0x1,name=rtc,hwirq=64,type=4
<5>[90507.155709] -(7)[123:irq/244-mt6358-]rtc_mt6358: mtk_rtc_irq_handler:1
<5>[90507.155806] -(7)[123:irq/244-mt6358-]rtc_mt6358: pdn1 = 0x 0
<5>[90507.155828] (7)[123:irq/244-mt6358-]rtc_mt6358: alarm time is up
<4>[90507.162474] done.
<5>[90507.162510] (3)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90507.162527] (3)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<6>[90507.162864] (5)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<5>[90507.166496] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90507.170579] (3)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10209548,18366,25575scp1 sleep state: 54927,23442,23442
<6>[90507.170618] (3)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90507.170618]
<5>[90507.170635] (3)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90507.170647] (3)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90507.170668] -(3)[10823:Binder:636_2]Resume caused by IRQ 254, DPMAIF_AP
<5>[90507.170682] (3)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90507.171131] -(2)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90507.171814] (3)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90507.172483] (3)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90507.172518] (3)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:52:01.287727878 UTC
<6>[90507.172664] (3)[30078:kworker/3:3][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:3><0x757e>
<36>[90507.172685] (1)[576:logd.auditd]type=1400 audit(1671083521.283:1623250):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90507.172905] (3)[30078:kworker/3:3]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90507.172919] (3)[30078:kworker/3:3]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90507.172929] (3)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90507.172954] (3)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90507.172977] (3)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90507.175162] (3)[10823:Binder:636_2]PM: suspend exit
<6>[90507.189727] -(2)[8025:Dns_158_10182][ccci1/dpmaif]tx0_resume_tx: 0x80000,
0x80000, 0x0
<6>[90507.189806] -(3)[5674:Thread-58][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x80000, 0x0
<6>[90507.201763] (6)[7539:kworker/u17:0][ccci1/cif]CCIF_MD wakeup source:(5/10/0)
(104)
<4>[90507.209117] -(4)[1893:AlarmManager]alarmtimer_enqueue: 4 callbacks suppressed
<5>[90507.209123] -(4)[1893:AlarmManager]alarmtimer_enqueue, 218301021000000
<5>[90507.215627] -(4)[1893:AlarmManager]alarmtimer_enqueue, 218301021000000
<3>[90507.219956] (0)[7416:kworker/0:2]typec_cc_orientation = 2
<5>[90507.238737] -(5)[5024:Binder:1454_15]alarmtimer_enqueue, 218301021000000
<6>[90507.276054] (4)[10823:Binder:636_2]active wakeup source: main
<6>[90507.276084] (4)[10823:Binder:636_2]active wakeup source: usb
<6>[90507.276120] (4)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90507.276134] (4)[10823:Binder:636_2]active wakeup source: ccmni_md1
<5>[90507.316175] -(0)[1495:Binder:1454_2]alarmtimer_enqueue, 218301021000000
<5>[90507.318179] -(0)[1495:Binder:1454_2]alarmtimer_enqueue, 218301021000000
<3>[90507.325394] (0)[7416:kworker/0:2]chg_type = 0, hvdcp_type = 0
<3>[90507.380183] (0)[7416:kworker/0:2]get_connector_temp: connector_temp:343
<6>[90507.380245] (0)[7416:kworker/0:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90507.380310] (0)[7416:kworker/0:2]mt_charger_plugin plugin:0
<6>[90507.431655] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90507.509575] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90507.533453] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:00000000cad3e3e9 triggered!
<6>[90507.533557] (1)[559:lmkd]psi_trigger_poll: t:00000000cad3e3e9 triggered!
<6>[90507.749312] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90507.749521] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90507.856702] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90508.189567] (3)[7406:kworker/3:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/3:2><0x1cee>
<6>[90508.245075] (0)[3064:kworker/0:0][bq27z561] fg_update_status:
SOC:59,Volt:3933,Cur:124,Temp:351,RM:2229,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90508.245345] (0)[3064:kworker/0:0][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90508.246195] (0)[7416:kworker/0:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90508.246828] (3)[118:pd_dbg_info]///PD dbg info 128d
<5>[90508.246855] (3)[118:pd_dbg_info]<90508.246>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90508.246855] <90508.246>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90508.255410] (0)[7416:kworker/0:2]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<6>[90508.318180] (1)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90508.318217] (1)[6931:kworker/u16:8]PM: Syncing filesystems ...
<7>[90508.318314] (1)[6931:kworker/u16:8]PM: ++
<7>[90508.327163] (1)[6931:kworker/u16:8]PM: --
<5>[90508.363066] -(0)[0:swapper/0]lvts_paused = 1
<5>[90508.363146] -(0)[0:swapper/0]Cnt= 10 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 1,1,0,
LVTSMSRCTL1[10:0] = 0x6
<5>[90508.363190] -(0)[0:swapper/0]Cnt= 20 LVTS TC 0, LVTSMSRCTL1[10,7,0] = 0,1,0,
LVTSMSRCTL1[10:0] = 0x2
<4>[90508.382164] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 674,
572, 676, 515, 378, 228, 184, 109, success counter cpu: 160, 103, 104, 105, 65, 25,
24, 8, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 265, 177,
173, 175, 149, 39, 30, 16, o: 1-7, p: , f: 0, t: 90508508000000, 90508512098161,
9223372036854775807, 90508577911623, 90508510784745, 90508508000000,
90508540000000, 90508796000000,
<4>[90508.426424] done.
<6>[90508.434847] (1)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10209608,18389,25603scp1 sleep state: 54929,23444,23444
<6>[90508.434898] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90508.434898]
<6>[90508.434922] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90508.434922]
<6>[90508.434945] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90508.434945]
<6>[90508.435007] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90508.435007]
<5>[90508.435030] (1)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90508.435048] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90508.435083] (1)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90508.435111] (1)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90508.435407] (1)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90508.435440] (1)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:52:02.550658647 UTC
<36>[90508.435922] (1)[576:logd.auditd]type=1400 audit(1671083522.547:1623251):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90508.436794] (1)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90508.436847] (1)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90508.436875] (1)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90508.437361] (4)[613:teei_daemon]Freezing user space processes ...
<5>[90508.439251] (4)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90508.439960] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90508.439993] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90508.465385] (elapsed 0.028 seconds) done.
<6>[90508.465420] (1)[10823:Binder:636_2]OOM killer disabled.
<6>[90508.465439] (1)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.011 seconds) done.
<3>[90508.520118] (1)[10823:Binder:636_2]get_connector_temp: connector_temp:343
<3>[90508.520167] (1)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90508.520236] (1)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90508.521646] (1)[6931:kworker/u16:8]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<3>[90508.522667] (1)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90508.522782] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90508.522819] (1)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90508.523683] (0)[23438:kworker/u16:4][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<5>[90508.523749] (0)[23438:kworker/u16:4]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<3>[90508.523832] (1)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<5>[90508.523896] (1)[6931:kworker/u16:8]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90508.524107] (1)[6931:kworker/u16:8]ghr: scsi_execute exit ret = 0x0
<3>[90508.524146] (0)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<6>[90508.525631] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90508.525657] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90508.525685] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90508.526494] (1)[10823:Binder:636_2]alarmtimer_suspend convert
218301021000000 to 2022/12/15 05:52:55 (now = 2022/12/15 05:52:02)
<5>[90508.526612] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:52:56 (1)
<5>[90508.529979] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90508.530385] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90508.530420] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90508.530431] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90508.530539] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90508.530582] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90508.530628] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90508.530628]
<6>[90508.530651] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90508.530651]
<6>[90508.530673] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90508.530673]
<6>[90508.530695] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90508.530695]
<6>[90508.530810] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90508.530852] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90508.530875] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90508.531471] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90508.531554] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90508.531778] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90508.532129] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90508.532151] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90508.532579] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90508.532598] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90508.533033] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90508.533379] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,794 us
<6>[90508.534341] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00000800,
00000000, 00000000, 0002000e
<6>[90508.534611] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90508.534747] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90508.535151] (1)[10823:Binder:636_2]suspend of devices complete after 55.130
msecs
<6>[90508.542119] (1)[10823:Binder:636_2]late suspend of devices complete after
6.939 msecs
<4>[90508.542147] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90508.547875]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90508.548521] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90508.548914] (1)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90508.549776] (1)[10823:Binder:636_2]noirq suspend of devices complete after
6.951 msecs
<6>[90508.549849] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90508.549849] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90508.549849] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90508.549929] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90508.549929] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90508.549929] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90508.549929] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90508.549929] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90508.549929] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 103611, r13 = 0xc40009ac, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem not sleep, subsys sleep r12 =
0x800, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9a67e7ff, req_sta =
0x1c000df 0x0 0x50100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req =
0x0, clk_settle = 0x60fe, wlk_cntcv_l = 0x9f5ce89f, wlk_cntcv_h = 0x294,
26M_off_pct = 25
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 3.161 seconds
<4>[90508.549929] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90508.549929] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90508.549929] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90508.549929] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90508.549929] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90508.549929] -(1)[0:swapper/1]Call trace:
<4>[90508.549929] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90508.549929] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90508.549929] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90508.549929] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90508.549929] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90508.549929] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90508.549929] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90508.549929] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90508.549929] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90508.549929] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90508.549929] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90508.549929] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90508.549929] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90508.549929] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90508.549929] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90508.549929] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90508.549929] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90508.549929] -(1)[0:swapper/1]---[ end trace 308173880bd0bfa6 ]---
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 25458 (32k)
<4>[90508.549929] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 0.776/3.004/3.945/0.959/3.3996 seconds
<6>[90508.549929] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90508.550041] -(1)[0:swapper/1][SCP] ipi id/type/action/event/reserve =
3/16/6/4/0
<6>[90508.550083] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x140000, 0x100000, 0x0)
<6>[90508.550124] -(1)[0:swapper/1]i2c no need switch top pll
<6>[90508.552006] (1)[6931:kworker/u16:8]mtu3_phone musb-hdrc: mtu3_resume
<5>[90508.552964]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90508.552988] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90508.555241] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90508.560781] (1)[10823:Binder:636_2]noirq resume of devices complete after
9.832 msecs
<6>[90508.561391] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
data_notify
<4>[90508.561416] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90508.566635] (1)[10823:Binder:636_2]early resume of devices complete after
5.170 msecs
<5>[90508.567181] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90508.569127] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90508.569453] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90508.569491] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1467 us
<5>[90508.570203] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90508.570552] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90508.570577] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90508.570652] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90508.570684] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90508.570764] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90508.570952] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90508.571007] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90508.571030] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90508.571112] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90508.571152] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90508.571647] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90508.571675] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90508.571689] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90508.571832] (2)[10823:Binder:636_2]zcvf, no update time:83 96 avgc:0
avgc_thread
<5>[90508.571858] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90508.574621] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90508.575690] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90508.575786] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90508.576069] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90508.576102] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90508.576749] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90508.576912] (2)[7306:kworker/2:3][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90508.579009] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90508.579596] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90508.581087] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90508.581718] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90508.581971] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90508.585473] (1)[10823:Binder:636_2]resume of devices complete after 18.808
msecs
<6>[90508.589522] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90508.589547] (1)[7386:kworker/1:0]Restarting tasks ...
<3>[90508.590534] (1)[7386:kworker/1:0]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90508.590574] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_dec_probe:273:
[VCU] vcu device in not ready
<3>[90508.591353] (1)[7386:kworker/1:0]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90508.591376] (1)[7386:kworker/1:0][MTK_V4L2][ERROR] mtk_vcodec_enc_probe:262:
[VCU] vcu device in not ready
<3>[90508.594917] (0)[933:[email protected]][mtk_nanohub]sensor_id id 16,
sensor_type:17
<6>[90508.596617] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90508.596734] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90508.596787] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<5>[90508.597800] -(3)[1893:AlarmManager]alarmtimer_enqueue, 218301021000000
<4>[90508.609374] done.
<5>[90508.609407] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90508.609425] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90508.613160] (4)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90508.620783] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10209769,18427,25671scp1 sleep state: 54931,23444,23444
<6>[90508.620822] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90508.620822]
<5>[90508.620839] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90508.620852] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90508.620873] -(2)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90508.620888] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90508.621346] -(3)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90508.622574] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90508.623509] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90508.623551] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:52:05.904222338 UTC
<6>[90508.623725] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<36>[90508.623732] (3)[576:logd.auditd]type=1400 audit(1671083525.898:1623252):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<6>[90508.623819] (2)[30082:kworker/2:1]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90508.623830] (2)[30082:kworker/2:1]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90508.623859] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90508.623875] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90508.623889] (2)[10823:Binder:636_2]PM: suspend exit
<6>[90508.624589] -(2)[1454:system_server]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<5>[90508.626224] -(2)[1454:system_server]alarmtimer_enqueue, 218301023000000
<5>[90508.626405] -(2)[1454:system_server]alarmtimer_enqueue, 218301023000000
<5>[90508.628402] -(2)[1454:system_server]alarmtimer_enqueue, 218301023000000
<5>[90508.629505] -(2)[1454:system_server]alarmtimer_enqueue, 218335630000000
<3>[90508.668054] (2)[23427:kworker/2:2]typec_cc_orientation = 2
<6>[90508.735435] (4)[10823:Binder:636_2]active wakeup source: main
<6>[90508.735465] (4)[10823:Binder:636_2]active wakeup source: usb
<6>[90508.735501] (4)[10823:Binder:636_2]active wakeup source: data_notify
<3>[90508.775951] (2)[23427:kworker/2:2]chg_type = 0, hvdcp_type = 0
<6>[90508.826365] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90508.865292] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90508.877286] (2)[23427:kworker/2:2]get_connector_temp: connector_temp:343
<6>[90508.877327] (2)[23427:kworker/2:2][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90508.877393] (2)[23427:kworker/2:2]mt_charger_plugin plugin:0
<4>[90508.893859] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90508.893893] -(4)[7032:kworker/4:0]active wake lock :
NETLINK,last_time:90509006
<4>[90508.893910] -(4)[7032:kworker/4:0]active wake lock : main,last_time:90508707
<6>[90508.929078] (2)[7306:kworker/2:3]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90509.046956] (4)[10823:Binder:636_2]PM: suspend entry (s2idle)
<6>[90509.046985] (2)[19178:kworker/u16:2]PM: Syncing filesystems ...
<7>[90509.047079] (2)[19178:kworker/u16:2]PM: ++
<7>[90509.058249] (2)[19178:kworker/u16:2]PM: --
<5>[90509.150670] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90509.150759] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90509.150813] (2)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90509.150856] (2)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90509.157422] done.
<6>[90509.162390] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10209797,18433,25688scp1 sleep state: 54933,23444,23444
<6>[90509.162421] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:3
<6>[90509.162421]
<6>[90509.162445] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 0
<6>[90509.162445]
<6>[90509.162468] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 1
<6>[90509.162468]
<6>[90509.162489] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),407: jpeg dec sn wait core 2
<6>[90509.162489]
<5>[90509.162510] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 3
<6>[90509.162527] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 3
<5>[90509.162558] (2)[10823:Binder:636_2][CPU][EEM]Start EEM suspend
<5>[90509.162585] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM suspend
<5>[90509.162830] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90509.162861] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend entry 2022-
12-15 05:52:06.443544492 UTC
<6>[90509.163046] (2)[10823:Binder:636_2][btmtk_info] btmtk_pm_notifier_callback:
bt_state[3], event[3]
<6>[90509.163103] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90509.163129] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90509.163151] (3)[576:logd.auditd]Freezing user space processes ...
<36>[90509.163238] (3)[576:logd.auditd]type=1400 audit(1671083526.438:1623253):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<5>[90509.164423] (1)[613:teei_daemon][tz_vfs][ERROR]: [tz_vfs_read][162]
wait_for_completion was interrupt
<6>[90509.166170] (3)[1409:audio.service.m][IPI][DMA] hal_dma_get_queue_msg(), -
ERESTARTSYS
<6>[90509.166198] (3)[1409:audio.service.m][IPI][DMA] audio_ipi_dma_msg_read(),
hal_dma_get_queue_msg retval -4
<4>[90509.192483] (elapsed 0.029 seconds) done.
<6>[90509.192522] (2)[10823:Binder:636_2]OOM killer disabled.
<6>[90509.192542] (2)[10823:Binder:636_2]Freezing remaining freezable tasks ...
(elapsed 0.013 seconds) done.
<3>[90509.253301] (2)[10823:Binder:636_2]get_connector_temp: connector_temp:343
<3>[90509.253348] (2)[10823:Binder:636_2][xmusb350]
smblib_set_sw_conn_therm_regulation: smblib_set_sw_conn_therm_regulation enable: 0
<6>[90509.253416] (2)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_suspend: gpu_suspend
<5>[90509.254758] (2)[19178:kworker/u16:2]sd 0:0:0:2: [sdc] Synchronizing SCSI
cache
<5>[90509.255221] (1)[23444:kworker/u16:7]sd 0:0:0:1: [sdb] Synchronizing SCSI
cache
<3>[90509.255811] (2)[10823:Binder:636_2][bq2597x-MASTER]:bq2597x_suspend:Suspend
successfully!
<3>[90509.255917] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend 1
<3>[90509.255954] (2)[10823:Binder:636_2]st21nfc_suspend : st21nfc_suspend
<3>[90509.256748] (0)[2328:kworker/u16:1][bq2597x-SLAVE]:bq2597x_suspend:Suspend
successfully!
<5>[90509.256863] (0)[2328:kworker/u16:1]sd 0:0:0:0: [sda] Synchronizing SCSI
cache
<3>[90509.256978] (1)[23444:kworker/u16:7]ghr: scsi_execute exit ret = 0x0
<3>[90509.256989] (2)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90509.257107] (0)[2328:kworker/u16:1]ghr: scsi_execute exit ret = 0x0
<6>[90509.258627] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90509.258657] (1)[10823:Binder:636_2][edma] edma_power_off force power off
skip
<6>[90509.258687] (1)[10823:Binder:636_2][apusys]mdw_sched_pause pause
<5>[90509.259421] (1)[10823:Binder:636_2]alarmtimer_suspend convert
218335630000000 to 2022/12/15 05:53:29 (now = 2022/12/15 05:52:06)
<5>[90509.259574] (1)[10823:Binder:636_2]rtc_mt6358: set al time = 2022/12/15
05:53:30 (1)
<5>[90509.263268] (1)[10823:Binder:636_2]******** battery_suspend!! iavg=1 ***GM3
disable:1 0 0 0 tmp_intr:0***
<6>[90509.263725] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90509.263766] (1)[10823:Binder:636_2][FDVT][FDVT_pm_suspend] FDVT suspend
clock_enable_count: 0, fdvt_count: 0
<6>[90509.263777] (1)[10823:Binder:636_2][RSC]RSC_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90509.263893] (1)[10823:Binder:636_2][VCU] mtk_vcu_suspend done
<6>[90509.263939] (1)[10823:Binder:636_2][DPE]DPE_suspend:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90509.263988] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),849: jpeg_drv_hybrid_dec_suspend
<6>[90509.263988]
<6>[90509.264011] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 0
<6>[90509.264011]
<6>[90509.264034] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 1
<6>[90509.264034]
<6>[90509.264056] (1)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend(),851: jpeg dec suspend core 2
<6>[90509.264056]
<6>[90509.264180] (1)[10823:Binder:636_2][DIP][DIP_suspend] DIP suspend
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90509.264222] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90509.264246] (1)[10823:Binder:636_2][WPE][WPE_suspend] WPE_suspend: WPE
suspend g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<3>[90509.264923] (1)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<3>[90509.265011] (1)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90509.265320] (1)[10823:Binder:636_2][drm:mtk_drm_sys_suspend]
mtk_drm_sys_suspend
<5>[90509.265708] (1)[10823:Binder:636_2][MDP]cmdq_suspend ignore
<5>[90509.265731] (1)[10823:Binder:636_2][MDP]cmdq_core_suspend usage:0 exec
thread:0x0
<6>[90509.266190] (1)[10823:Binder:636_2]ufshpb_suspend:3300 info: ufshpb_lu 2
goto suspend
<6>[90509.266209] (1)[10823:Binder:636_2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<3>[90509.266688] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90509.267041] (1)[10823:Binder:636_2]ufshcd bootdevice: ss,ret 0,847 us
<6>[90509.268084] (1)[10823:Binder:636_2][DVFSRC] V:575000, F_OPP:32, RG:00800000,
00000000, 00000000, 00000000
<6>[90509.268384] (1)[10823:Binder:636_2]MTK-BTIF[I]_btif_suspend:succeed
<5>[90509.268521] (1)[10823:Binder:636_2][Power/PPM] ppm_main_suspend: suspend
callback in
<6>[90509.268955] (1)[10823:Binder:636_2]suspend of devices complete after 59.303
msecs
<6>[90509.276174] (1)[10823:Binder:636_2]late suspend of devices complete after
7.188 msecs
<4>[90509.276202] (1)[10823:Binder:636_2][name:spm&]
[mtk_lpm_suspend_prepare_late:336] - notify MD that AP suspend
<5>[90509.282412]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_suspend_noirq, 0
<5>[90509.283142] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_off
<6>[90509.283525] (1)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_suspend
<6>[90509.284342] (1)[10823:Binder:636_2]noirq suspend of devices complete after
7.192 msecs
<6>[90509.284413] -(1)[0:swapper/1]i2c no need switch top pll
<4>[90509.284413] -(1)[0:swapper/1][name:spm&]NO pll_if_on !!!
<4>[90509.284413] -(1)[0:swapper/1][name:spm&]NO subsys_if_on !!!
<6>[90509.284497] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_WCN is on!!
<6>[90509.284497] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_CEL is on!!
<6>[90509.284497] -(1)[0:swapper/1][Power/clkbuf] suspend warning: XO_EXT is on!!
<5>[90509.284497] -(1)[0:swapper/1]suspend warning[0m: PG_MD1
<5>[90509.284497] -(1)[0:swapper/1]suspend warning[0m: PG_CONN
<6>[90509.284497] -(1)[0:swapper/1]skip cpu_pm_suspend when s2idle
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:174] -
prepare suspend enter
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_prompt:185] -
suspend enter
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:198] -
prepare resume
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][__mt6885_suspend_reflect:204] -
resume
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][SPM] suspend wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 464260, r13 = 0x84000880, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7ff, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe, wlk_cntcv_l = 0xaae9c69f, wlk_cntcv_h = 0x294, 26M_off_pct =
75
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][SPM] Suspended for 14.168 seconds
<4>[90509.284497] -(1)[0:swapper/1]------------[ cut here ]------------
<4>[90509.284497] -(1)[0:swapper/1]WARNING: CPU: 1 PID: 0 at
kernel/time/timekeeping.c:746 getnstimeofday64+0x120/0x128
<4>[90509.284497] -(1)[0:swapper/1]Modules linked in: wlan_drv_gen4m
ffffff84b9080000 (null) 2588672 0 (O) wmt_chrdev_wifi ffffff84b906d000
(null) 40960 0 (O) gps_drv ffffff84b8fe3000 (null) 516096 0 (O)
fmradio_drv_connac2x ffffff84b8fa5000 (null) 217088 0 (O) bt_drv_6893
ffffff84b8f0b000 (null) 266240 0 (O) conninfra ffffff84b8eb6000
(null) 274432 0 (O) connfem ffffff84b8ea7000 (null) 40960 0 (O) fpsgo
ffffff84b8d89000 (null) 1150976 0 (PO)
<4>[90509.284497] -(1)[0:swapper/1]CPU: 1 PID: 0 Comm: swapper/1 Tainted: P S
W O 4.14.186-gacc786cd1d8f #1
<4>[90509.284497] -(1)[0:swapper/1]Hardware name: MT6891Z/CZA (DT)
<4>[90509.284497] -(1)[0:swapper/1]Call trace:
<4>[90509.284497] -(1)[0:swapper/1] dump_backtrace+0x0/0x1b4
<4>[90509.284497] -(1)[0:swapper/1] show_stack+0x14/0x1c
<4>[90509.284497] -(1)[0:swapper/1] dump_stack+0xd4/0x10c
<4>[90509.284497] -(1)[0:swapper/1] __warn+0xdc/0x168
<4>[90509.284497] -(1)[0:swapper/1] warn_slowpath_null+0x1c/0x24
<4>[90509.284497] -(1)[0:swapper/1] getnstimeofday64+0x120/0x128
<4>[90509.284497] -(1)[0:swapper/1] mt6885_show_message+0xcf8/0xe28
<4>[90509.284497] -(1)[0:swapper/1] mt6885_issuer_func+0x38/0x48
<4>[90509.284497] -(1)[0:swapper/1] __mt6885_suspend_reflect+0x80/0x2e4
<4>[90509.284497] -(1)[0:swapper/1] mt6885_suspend_s2idle_reflect+0x4c/0x94
<4>[90509.284497] -(1)[0:swapper/1] mtk_lp_cpuidle_resume+0xcc/0x108
<4>[90509.284497] -(1)[0:swapper/1] mtk_lpm_pwr_conservation+0x5c/0x68
<4>[90509.284497] -(1)[0:swapper/1] mtk_idle_state_enter+0xbc/0xd0
<4>[90509.284497] -(1)[0:swapper/1] cpuidle_enter_s2idle+0xb8/0xf4
<4>[90509.284497] -(1)[0:swapper/1] do_idle+0x12c/0x2b0
<4>[90509.284497] -(1)[0:swapper/1] cpu_startup_entry+0x20/0x24
<4>[90509.284497] -(1)[0:swapper/1] secondary_start_kernel+0x128/0x134
<4>[90509.284497] -(1)[0:swapper/1]---[ end trace 308173880bd0bfa7 ]---
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][SPM] md_slp_duration = 332341 (32k)
<4>[90509.284497] -(1)[0:swapper/1][name:spm&][SPM] [name:spm&][SPM]
MD/2G/3G/4G/5G_FR1 = 10.142/14.162/14.107/11.232/14.4183 seconds
<6>[90509.284497] -(1)[0:swapper/1]skip cpu_pm_resume when s2idle
<6>[90509.284625] -(1)[0:swapper/1][SCP] ipi id/type/action/event/reserve =
3/21/6/4/0
<6>[90509.284669] -(1)[0:swapper/1][ccci1/dpmaif]sys_resume need to
restore(0x140000, 0x100000, 0x0)
<6>[90509.284711] -(1)[0:swapper/1]i2c no need switch top pll
<6>[90509.286873] (1)[23444:kworker/u16:7]mtu3_phone musb-hdrc: mtu3_resume
<5>[90509.287943]
(1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_resume_noirq, 0
<5>[90509.287967] (1)[10823:Binder:636_2][Thermal/TZ/CPU]tscpu_thermal_clock_on
<5>[90509.290170] (1)[10823:Binder:636_2][Thermal/TZ/LVTS][COUNT_RC_NOW] 0:2601
1:2598 2:2595 3:2594 4:2606 5:2609 6:2607 7:2608 8:2577 9:2576 10:2602 11:2603
12:2611 13:2611 14:2602 15:2600 16:2601
<6>[90509.295871] (1)[10823:Binder:636_2]noirq resume of devices complete after
10.299 msecs
<6>[90509.296520] (1)[10823:Binder:636_2]PM: Pending Wakeup Sources: [timerfd]
data_notify
<4>[90509.296545] (1)[10823:Binder:636_2][name:spm&][mtk_lpm_suspend_restore:350]
- notify MD that AP resume
<6>[90509.302303] (1)[10823:Binder:636_2]early resume of devices complete after
5.698 msecs
<5>[90509.302859] (1)[10823:Binder:636_2][Power/PPM] ppm_main_resume: resume
callback in
<3>[90509.304990] (1)[10823:Binder:636_2]ghr: scsi_execute exit ret = 0x0
<6>[90509.305348] (1)[10823:Binder:636_2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90509.305389] (1)[10823:Binder:636_2]ufshcd bootdevice: sr,ret 0,1671 us
<5>[90509.306131] (2)[10823:Binder:636_2][MDP]cmdq_resume ignore
<6>[90509.306510] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90509.306537] (2)[10823:Binder:636_2]mtk_atomic_doze_preparation connector has
no crtc
<6>[90509.306619] (2)[10823:Binder:636_2]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<3>[90509.306652] (2)[10823:Binder:636_2]mtk_atomic_doze_finish connector has no
crtc
<7>[90509.306737] (2)[10823:Binder:636_2][drm:mtk_drm_sys_resume]
mtk_drm_sys_resume
<6>[90509.306933] (2)[10823:Binder:636_2][DIP][DIP_resume] DIP resume
G_u4DipEnClkCnt: 0, g_u4DipCnt: 0
<6>[90509.306994] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90509.307016] (2)[10823:Binder:636_2][WPE][WPE_resume] WPE_resume: WPE resume
g_u4EnableClockCount: 0, g_u4WpeCnt: 0
<6>[90509.307101] (2)[10823:Binder:636_2][DPE]DPE_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90509.307143] (2)[10823:Binder:636_2][VCU] mtk_vcu_resume done
<6>[90509.307672] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<6>[90509.307702] (2)[10823:Binder:636_2][FDVT][FDVT_pm_resume] FDVT resume
clock_enable_count: 0, fdvt_count: 0
<6>[90509.307715] (2)[10823:Binder:636_2][RSC]RSC_resume:g_u4EnableClockCount(0)
g_SuspendCnt(0).
<5>[90509.307876] (2)[10823:Binder:636_2]******** battery_resume!! iavg=1 ***GM3
disable:1 0 0 0***
<6>[90509.310743] (2)[10823:Binder:636_2][apusys]mdw_sched_restart resume
<3>[90509.311860] (2)[7306:kworker/2:3][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90509.311956] (2)[10823:Binder:636_2][bq2597x-SLAVE]:bq2597x_resume:Resume
successfully!
<3>[90509.312278] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume 1
<3>[90509.312425] (2)[10823:Binder:636_2]st21nfc_resume : st21nfc_resume
<3>[90509.312995] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90509.313142] (2)[30082:kworker/2:1][bq2597x-MASTER]:bq2597x_resume:Resume
successfully!
<3>[90509.315458] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90509.315963] (2)[26031:kworker/2:5][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90509.316800] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90509.317499] (3)[7406:kworker/3:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90509.317605] (3)[10823:Binder:636_2][GPU/MALI]
[INFO]@pm_callback_power_resume: gpu_resume
<6>[90509.320402] (3)[10823:Binder:636_2]resume of devices complete after 18.065
msecs
<3>[90509.324996] (3)[30078:kworker/3:3]mtk-vcodec-dec 1602f000.vdec_gcon: [VCU]
can't get vcu node
<3>[90509.325021] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_dec_probe:273: [VCU] vcu device in not ready
<6>[90509.325543] (2)[10823:Binder:636_2]OOM killer enabled.
<6>[90509.325566] (3)[30078:kworker/3:3]Restarting tasks ...
<3>[90509.326022] (3)[30078:kworker/3:3]mtk-vcodec-enc 17000000.venc_gcon: [VCU]
can't get vcu node
<3>[90509.326054] (3)[30078:kworker/3:3][MTK_V4L2][ERROR]
mtk_vcodec_enc_probe:262: [VCU] vcu device in not ready
<6>[90509.333932] (1)[1316:vdec_log_info][VCU][0] wait event return -512
@vcu_log_get
<6>[90509.334048] (7)[1314:receiver][VCU][0][0] wait event return -512
@vcu_ipi_get
<6>[90509.334150] (6)[1315:receiver][VCU][0][1] wait event return -512
@vcu_ipi_get
<4>[90509.349280] done.
<5>[90509.349337] (2)[10823:Binder:636_2][MDP]cmdq_core_resume_notifier
<5>[90509.349356] (2)[10823:Binder:636_2][cmdq] mdp buffer pool already created
<5>[90509.353435] (5)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[5] flush complete
<6>[90509.362773] (2)[10823:Binder:636_2][scp_dvfs]: [name:spm&][SPM] scp0 sleep
state: 10210427,18608,25886scp1 sleep state: 54935,23446,23446
<6>[90509.362815] (2)[10823:Binder:636_2][JPEG] level=0
jpeg_drv_hybrid_dec_suspend_notifier(),402: jpeg_drv_hybrid_dec_suspend_notifier,
action:4
<6>[90509.362815]
<5>[90509.362831] (2)[10823:Binder:636_2]rtc_mt6358: rtc_pm_event = 4
<6>[90509.362843] (2)[10823:Binder:636_2][VCU] mtk_vcu_suspend_notifier ok action
= 4
<6>[90509.362864] -(2)[10823:Binder:636_2]Resume caused by IRQ 329, MBOX_ISR
<5>[90509.362878] (2)[10823:Binder:636_2][CPU][EEM]Start EEM resume
<5>[90509.363905] (2)[10823:Binder:636_2][xxxxEEMG] Start EEM resume
<5>[90509.364190] -(0)[402:EEM_CTRL_L][Thermal/TZ/CPU]Driver is ready to report
valid temperatures
<5>[90509.364760] (2)[10823:Binder:636_2]log_store can't open expdb file: -13.
<4>[90509.364806] (2)[10823:Binder:636_2][name:spm&][SPM] PM: suspend exit 2022-
12-15 05:52:20.817302723 UTC
<6>[90509.364993] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90509.365085] (2)[23427:kworker/2:2]conn_pwr_core_resume low_battery=0,
thermal=0, customer=0x00000000
<6>[90509.365097] (2)[23427:kworker/2:2]conn_pwr_core_resume bt=0, FM=0, GPS=0,
Wi-Fi=0
<6>[90509.365108] (2)[10823:Binder:636_2]conninfra@(consys_power_state:443)
[consys_power_state] [0x2000000e]
<6>[90509.365134] (2)[10823:Binder:636_2][btmtk_info] BGF_MCU_PC_DBG[0x1806022c]
read[0x00000000], N9_MCU_MAILBOX_DBG[0x18060268] read[0x871a0000],
HOST_MAILBOX_BT_ADDR[0x1806026c] read[0x90200003], CR[0x180602e0] read[0x00006363],
CR[0x180602e4] read[0x00000000], CR[0x180602e8] read[0x00000000], CR[0x180602ec]
read[0x00000000],
<6>[90509.365308] (2)[10823:Binder:636_2][btmtk_info] [bt host info] [0]
[BLE_SCAN : 0x00000000] [1-16] not set
<6>[90509.367952] (2)[10823:Binder:636_2]PM: suspend exit
<36>[90509.369058] (3)[576:logd.auditd]type=1400 audit(1671083540.813:1623254):
avc: denied { search } for comm="Binder:636_2" name="block" dev="tmpfs" ino=9931
scontext=u:r:system_suspend:s0 tcontext=u:object_r:block_device:s0 tclass=dir
permissive=0
<3>[90509.457483] (2)[30082:kworker/2:1]typec_cc_orientation = 2
<6>[90509.469269] (5)[10823:Binder:636_2]active wakeup source: main
<6>[90509.469300] (5)[10823:Binder:636_2]active wakeup source: usb
<6>[90509.469339] (5)[10823:Binder:636_2]active wakeup source: ttyC0
<6>[90509.469357] (5)[10823:Binder:636_2]active wakeup source: data_notify
<3>[90509.500389] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<3>[90509.504429] (2)[857:[email protected]][mtk_nanohub]sensor_id id 21,
sensor_type:22
<6>[90509.508271] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<3>[90509.558670] (2)[30082:kworker/2:1]chg_type = 0, hvdcp_type = 0
<6>[90509.565607] (1)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x91c]=0x1,name=pwrkey,hwirq=48,type=4
<5>[90509.572237] (6)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<4>[90509.577450] -(7)[249:chre_kthread]CPU7: update max cpu_capacity 934
<3>[90509.580547] (2)[857:[email protected]][mtk_nanohub]sensor_id id 83,
sensor_type:84
<4>[90509.581475] (1)[7478:Binder:636_3]audit: audit_lost=1445362
audit_rate_limit=5 audit_backlog_limit=64
<3>[90509.581490] (1)[7478:Binder:636_3]audit: rate limit exceeded
<6>[90509.585658] (2)[977:HwBinder:852_1]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<6>[90509.585684] (2)[977:HwBinder:852_1]CRTC0 hold wakelock
mtk_drm_crtc_atomic_resume 4888
<6>[90509.585698] (2)[977:HwBinder:852_1][mtk_crtc_is_dual_pipe line:1212]
<6>[90509.585702] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1258]j:0,com_nr:12,path_len:12
<6>[90509.585711] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 22
<6>[90509.585717] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 19
<6>[90509.585722] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 28
<6>[90509.585728] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 34
<6>[90509.585733] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 40
<6>[90509.585738] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 6
<6>[90509.585744] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 4
<6>[90509.585749] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 59
<6>[90509.585754] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 1
<6>[90509.585759] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 15
<6>[90509.585765] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 51
<6>[90509.585770] (2)[977:HwBinder:852_1][mtk_crtc_prepare_dual_pipe
line:1262]prepare comp id in dual pipe 9
<6>[90509.587757] (3)[977:HwBinder:852_1]mtk_dsi_poweron: clk_refcnt = 2, skip
power on
<6>[90509.588500] (3)[977:HwBinder:852_1][mtk_disp_mutex_submit_sof line:6712]
<6>[90509.588576] (3)[977:HwBinder:852_1][mtk_ddp_connect_dual_pipe_path
line:6203]
<6>[90509.588583] (3)[977:HwBinder:852_1]connect dual pipe path
<6>[90509.588632] (3)[977:HwBinder:852_1]mtk_disp_mutex_src_set, id:12, val:0x41
<6>[90509.588647] (3)[977:HwBinder:852_1]
<6>[90509.588680] (3)[977:HwBinder:852_1]
<6>[90509.588691] (3)[977:HwBinder:852_1][mtk_rdma_config line:837]
<6>[90509.588842] (3)[977:HwBinder:852_1][mtk_crtc_config_default_path line:4499]
<6>[90509.588848] (3)[977:HwBinder:852_1]
<6>[90509.588862] (3)[977:HwBinder:852_1]
<6>[90509.588872] (3)[977:HwBinder:852_1][mtk_rdma_config line:837]
<6>[90509.589572] (3)[977:HwBinder:852_1]mtk_disp_esd_check_switch 1
<6>[90509.589622] (3)[977:HwBinder:852_1]mtk_output_dsi_enable +, new_doze_state =
0, dsi->doze_enabled = 0, output = 0 dsi->mi_cfg.crc_state = 5
<6>[90509.589630] (3)[977:HwBinder:852_1]lcm_prepare+
<3>[90509.589636] (3)[977:HwBinder:852_1]lcm_panel_vm18_enable +
<3>[90509.589655] (3)[977:HwBinder:852_1]lcm_panel_vm18_enable
regulator_is_enabled=0
<3>[90509.591783] (0)[977:HwBinder:852_1]lcm_panel_vm18_enable -
<3>[90509.592806] (0)[977:HwBinder:852_1]lcm_panel_dvdd_enable +
<3>[90509.593025] (0)[977:HwBinder:852_1]lcm_panel_dvdd_enable
regulator_is_enabled=0
<3>[90509.593284] (0)[977:HwBinder:852_1][wl2866d_masked_write] : Writing 0x02 to
0x000e with mask 0x02
<3>[90509.593651] (0)[977:HwBinder:852_1][wl2866d_regulator_enable] : [wl2866d-
dvdd2][1] regulator enable
<3>[90509.593667] (0)[977:HwBinder:852_1]lcm_panel_dvdd_enable -
<6>[90509.594742] (0)[977:HwBinder:852_1]lm36273_bl_bias_conf backlight and bias
setting
<6>[90509.595062] (0)[977:HwBinder:852_1]lm36273_bias_enable enable = 1
<3>[90509.609360] (2)[30082:kworker/2:1]get_connector_temp: connector_temp:344
<6>[90509.609386] (2)[30082:kworker/2:1][xmusb350] xmusb350_get_vbus_disable:
xmusb350_get_vbus_disable: xmusb350 get vbus disable:0
<6>[90509.609406] (2)[30082:kworker/2:1]mt_charger_plugin plugin:0
<6>[90509.613240] (1)[977:HwBinder:852_1]lcm_prepare-
<6>[90509.613265] (1)[977:HwBinder:852_1]mtk_dsi_poweron: clk_refcnt = 3, skip
power on
<6>[90509.614371] (2)[977:HwBinder:852_1]
[mi_disp:mi_dsi_display_wakeup_pending_doze_work] [info]pending_doze_cnt = 0
<15>[90509.629795] (4)[8052:Binder:564_1]vold: The trim thread is not running
<15>[90509.629962] (4)[8052:Binder:564_1]vold: idle maintenance stopped
<4>[90509.635842] -(5)[30622:bt_hci_thread]alarmtimer_enqueue: 14 callbacks
suppressed
<5>[90509.635845] -(5)[30622:bt_hci_thread]alarmtimer_enqueue, 218275263000000
<5>[90509.639343] -(5)[30623:HwBinder:30518_]alarmtimer_enqueue, 218727855000000
<5>[90509.639648] -(0)[30622:bt_hci_thread]alarmtimer_enqueue, 218275267000000
<5>[90509.640909] -(1)[30623:HwBinder:30518_]alarmtimer_enqueue, 218727855000000
<5>[90509.641212] -(1)[3653:WifiHandlerThre]alarmtimer_enqueue, 218287262000000
<6>[90509.643473] (1)[857:[email protected]][NVT-ts-spi] nvt_palm_sensor_write 1735:
enter 1 0
<6>[90509.643491] (1)[857:[email protected]]palm_sensor_store value:1
<6>[90509.655771] (1)[977:HwBinder:852_1]push_table 0: 1
<6>[90509.655795] (1)[977:HwBinder:852_1]push_table 1: 1
<6>[90509.655821] (1)[977:HwBinder:852_1]push_table 2: 5
<6>[90509.655851] (1)[977:HwBinder:852_1]push_table 3: 1
<6>[90509.655868] (1)[977:HwBinder:852_1]push_table 4: 2
<6>[90509.655891] (1)[977:HwBinder:852_1]push_table 5: 1
<6>[90509.655908] (1)[977:HwBinder:852_1]push_table 6: 1
<6>[90509.655925] (1)[977:HwBinder:852_1]push_table 7: 1
<6>[90509.655941] (1)[977:HwBinder:852_1]push_table 8: 1
<6>[90509.655958] (1)[977:HwBinder:852_1]push_table 9: 1
<6>[90509.655974] (1)[977:HwBinder:852_1]push_table 10: 1
<6>[90509.655990] (1)[977:HwBinder:852_1]push_table 11: 1
<6>[90509.656007] (1)[977:HwBinder:852_1]push_table 12: 1
<6>[90509.656023] (1)[977:HwBinder:852_1]push_table 13: 1
<6>[90509.656040] (1)[977:HwBinder:852_1]push_table 14: 1
<6>[90509.656056] (1)[977:HwBinder:852_1]push_table 15: 1
<6>[90509.656072] (1)[977:HwBinder:852_1]push_table 16: 1
<6>[90509.656089] (1)[977:HwBinder:852_1]push_table 17: 1
<6>[90509.656105] (1)[977:HwBinder:852_1]push_table 18: 1
<6>[90509.656121] (1)[977:HwBinder:852_1]push_table 19: 1
<6>[90509.656138] (1)[977:HwBinder:852_1]push_table 20: 1
<6>[90509.656169] (1)[977:HwBinder:852_1]push_table 21: 1
<6>[90509.656186] (1)[977:HwBinder:852_1]push_table 22: 1
<6>[90509.656202] (1)[977:HwBinder:852_1]push_table 23: 1
<6>[90509.656219] (1)[977:HwBinder:852_1]push_table 24: 1
<6>[90509.656235] (1)[977:HwBinder:852_1]push_table 25: 1
<6>[90509.656251] (1)[977:HwBinder:852_1]push_table 26: 1
<6>[90509.656268] (1)[977:HwBinder:852_1]push_table 27: 1
<6>[90509.656285] (1)[977:HwBinder:852_1]push_table 28: 16
<6>[90509.656333] (1)[977:HwBinder:852_1]push_table 29: 2
<6>[90509.656355] (1)[977:HwBinder:852_1]push_table 30: 2
<6>[90509.656377] (1)[977:HwBinder:852_1]push_table 31: 1
<6>[90509.656394] (1)[977:HwBinder:852_1]push_table 32: 1
<6>[90509.656410] (1)[977:HwBinder:852_1]push_table 33: 1
<6>[90509.656426] (1)[977:HwBinder:852_1]push_table 34: 1
<6>[90509.656442] (1)[977:HwBinder:852_1]push_table 35: 1
<6>[90509.656458] (1)[977:HwBinder:852_1]push_table 36: 1
<6>[90509.656474] (1)[977:HwBinder:852_1]push_table 37: 1
<6>[90509.656491] (1)[977:HwBinder:852_1]push_table 38: 1
<6>[90509.656507] (1)[977:HwBinder:852_1]push_table 39: 1
<6>[90509.656523] (1)[977:HwBinder:852_1]push_table 40: 1
<6>[90509.656539] (3)[7406:kworker/3:2]push_table 41: 0
<6>[90509.659535] (3)[7406:kworker/3:2]mt6360_pmu_chg mt6360_pmu_chg.2.auto:
mt6360_get_tchg: tchg = 35
<6>[90509.670539] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90509.670550] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x19991999], desc[BLE_SCAN]
<6>[90509.672897] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90509.672909] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x00000000], desc[BLE_SCAN]
<6>[90509.678140] (0)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90509.678159] (0)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x19991999], desc[BLE_SCAN]
<6>[90509.679136] (7)[1683:SystemPressureC]psi_write: new:0000000071870789
<3>[90509.680183] (6)[936:HwBinder:851_2][ION][ion_dbg] alloc_pages order=4
cache=0
<6>[90509.684383] (1)[3752:main_thread]<FW>PWR INFO-1: 1 b2 2 b 530c429 0 0 0 0
262 0 673078 0 0 1010101 58005cf 0 52db01a 219 0 0 0 0 2 200 0 0 0 17 0 0 0 0 0 0 0
0 52e9ebf 50e 0 0 0 0 4cd 0 0 0 0 25 0 0 1c 0 0 0 0 0 52a761e 64e0b 0 0 0 0 a04 6ec
0 0 0 f8 0 0 76 0 0 1d 0 0 63cc6 196 6 1a 6 1f
<6>[90509.685230] (7)[3752:main_thread]<FW>PWR INFO-2: 116 756 44b b7b 0 0 0 0 0 0
0 0 f0373ff0 530c41c f0373ff0 530c423 f0396640 5309be8 f0396640 5309fda f0329ede
530c41c ce 0 0 0 0 0 0 72 0 0 e 0 0 169 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 125 2 0 0 0 0 0
<6>[90509.685386] (5)[3752:main_thread]<FW>PWR INFO-3: 80010000 80010000 10000
10000 0 6 0 0 0 0 0 0 0 162 9 0
<3>[90509.708930] (3)[857:[email protected]][mtk_nanohub]sensor_id id 26,
sensor_type:27
<6>[90509.709203] (4)[563:psimon]update_triggers: group:000000007fa854f1
t:0000000071870789 triggered!
<6>[90509.709256] (1)[3985:PsiThread]psi_trigger_poll: t:0000000071870789
triggered!
<6>[90509.733208] (2)[977:HwBinder:852_1]push_table 43: 0
<6>[90509.777188] (2)[977:HwBinder:852_1]push_table 45: 1
<6>[90509.777217] (2)[977:HwBinder:852_1]push_table 46: 1
<6>[90509.777234] (2)[977:HwBinder:852_1]push_table 47: 1
<6>[90509.777251] (2)[977:HwBinder:852_1]push_table 48: 1
<6>[90509.777267] (2)[977:HwBinder:852_1]push_table 49: 1
<6>[90509.777284] (2)[977:HwBinder:852_1]push_table 50: 1
<6>[90509.777300] (2)[977:HwBinder:852_1]push_table 51: 1
<6>[90509.777316] (2)[977:HwBinder:852_1]lcm_panel_init- k10a-36-02-0a
<6>[90509.778017] (2)[977:HwBinder:852_1][NVT-ts-spi] nvt_drm_notifier_callback
3003: event=1, *blank=0
<6>[90509.778041] (2)[977:HwBinder:852_1][info] fpc_fb_notif_callback value = 1
blank = 0
<6>[90509.778046] (2)[977:HwBinder:852_1][info] fpc_fb_notif_callback lcd on
notify
<6>[90509.778054] (2)[977:HwBinder:852_1]mtk_output_dsi_enable -
<6>[90509.778121] (4)[27694:kworker/u17:1][NVT-ts-spi] nvt_ts_resume 2924: start
<6>[90509.778128] (4)[27694:kworker/u17:1][NVT-ts-spi] update_firmware_request
321: filename is novatek_nt36672c_k10a_fw01.bin
<6>[90509.778137] (4)[27694:kworker/u17:1][NVT-ts-spi] nvt_get_fw_need_write_size
75: fw_need_write_size = 131072(0x20000), NVT end flag
<6>[90509.778140] (4)[27694:kworker/u17:1][NVT-ts-spi] nvt_bin_header_parser 182:
ovly_info = 1, ilm_dlm_num = 2, ovly_sec_num = 2, info_sec_num = 13, partition = 17
<6>[90509.778328] (2)[977:HwBinder:852_1]mtk_atomic_doze_update_dsi_state
doze_changed:0, needs_modeset:1, doze_active:0
<4>[90509.778397] (2)[977:HwBinder:852_1]thermal_sys:
screen_state_for_thermal_callback: FB_BLANK_UNBLANK
<5>[90509.778451] (2)[977:HwBinder:852_1][Power/PPM] @ppm_lcmoff_switch: onoff = 1
<6>[90509.778454] (2)[977:HwBinder:852_1]#@# cm_mgr_fb_notifier_callback(581)
SCREEN ON
<6>[90509.778478] (2)[977:HwBinder:852_1]@@@@@@@@@@ Conninfra enter UNBLANK
@@@@@@@@@@@@@@
<6>[90509.778483] (2)[977:HwBinder:852_1][btmtk_info] btmtk_fb_notifier_callback:
blank state [0]->[1], and send cmd
<6>[90509.778486] (2)[977:HwBinder:852_1][btmtk_info] [InternalCmd]
btmtk_intcmd_wmt_blank_status
<6>[90509.778772] (1)[1035:mi_thermald]charger_manager_set_prop_system_temp_level:
charger_online=0, temp_level=0
<6>[90509.779070] (2)[977:HwBinder:852_1]conninfra@(opfunc_pre_cal_prepare:981)
[opfunc_pre_cal_prepare] [pre_cal] bt=[1] wf=[1] status=[4]
<6>[90509.779364] (2)[977:HwBinder:852_1][btmtk_info] btmtk_btif_send_and_recv,
ret = 500
<6>[90509.779372] (2)[977:HwBinder:852_1][btmtk_info] [InternalCmd]
btmtk_intcmd_wmt_blank_status done, result = WMT_EVT_SUCCESS
<6>[90509.782956] (5)[926:displayeffect]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90509.782,L:2047 L:2047 map:2047
<6>[90509.784305] (5)[926:displayeffect]mi-dsi-panel:
[dsi_panel_set_disp_param:1605] dsi_panel_set_disp_param-1605:dsi =
000000006c42e980, cmd = 0x30000001
<6>[90509.799001] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1944, tmp_bl
= 1912, hbm level = 0
<6>[90509.799296] (3)[1367:AALMain]lm36273_brightness_set: enable level = 1944
<6>[90509.813890] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1948, tmp_bl
= 1913, hbm level = 0
<6>[90509.847068] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1956, tmp_bl
= 1914, hbm level = 0
<6>[90509.863735] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1960, tmp_bl
= 1915, hbm level = 0
<6>[90509.873941] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90509.878300] (2)[27694:kworker/u17:1][NVT-ts-spi] nvt_update_firmware 1180:
Update firmware success! <100150 us>
<6>[90509.878432] (2)[27694:kworker/u17:1][NVT-ts-spi] nvt_get_fw_info 677: FW
type is 0x01, fw_ver=11
<6>[90509.878555] (2)[27694:kworker/u17:1][NVT-ts-spi] nvt_read_pid 603: PID=5950
<6>[90509.888764] (2)[27694:kworker/u17:1][NVT-ts-spi] nvt_irq_enable 169:
enable=1, desc->depth=0
<6>[90509.888788] (2)[27694:kworker/u17:1][NVT-ts-spi] nvt_ts_resume 2954:
palm_sensor_switch=1
<6>[90509.888790] (2)[27694:kworker/u17:1][NVT-ts-spi] nvt_ts_resume 2956: palm
sensor on status, switch to on
<6>[90509.888799] (2)[27694:kworker/u17:1][NVT-ts-spi] nvt_set_pocket_palm_switch
580: set pocket palm switch: 1
<6>[90509.895849] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1967, tmp_bl
= 1916, hbm level = 0
<6>[90509.914369] -(3)[18007:pool-4-thread-1][ccci1/dpmaif]tx0_resume_tx: 0x140000,
0x100000, 0x0
<6>[90509.916124] -(3)[1505:android.bg][ccci1/dpmaif]clear txq0_resume_done:
0x40000, 0x100000, 0x0
<6>[90509.928719] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1975, tmp_bl
= 1917, hbm level = 0
<6>[90509.929278] (4)[27694:kworker/u17:1][NVT-ts-spi] nvt_set_pocket_palm_switch
611: nvt_set_pocket_palm_switch --
<6>[90509.929286] (4)[27694:kworker/u17:1][NVT-ts-spi] nvt_ts_resume 2976: end
<6>[90509.946034] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1979, tmp_bl
= 1918, hbm level = 0
<5>[90509.973539] (6)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(5)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90509.975059] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 631
<6>[90509.979512] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1987, tmp_bl
= 1919, hbm level = 0
<5>[90509.980040] (7)[31866:kworker/7:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90509.980478] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(1)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90509.996097] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1991, tmp_bl
= 1920, hbm level = 0
<5>[90509.997304] (6)[30505:kworker/6:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90509.999686] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90510.028693] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1999, tmp_bl
= 1921, hbm level = 0
<6>[90510.045699] (2)[1367:AALMain]lm36273_brightness_set: bl level = 2003, tmp_bl
= 1922, hbm level = 0
<7>[90510.072235] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: effect-
>type=0x51,FF_CONSTANT=0x52,FF_PERIODIC=0x51
<7>[90510.072244] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect:
effect_type is FF_PERIODIC!
<7>[90510.072247] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id =8
<7>[90510.072251] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id=8 , aw8697->activate_mode = 0
<7>[90510.072261] -(6)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=8 ,
activate_mode = 0 val = 1
<7>[90510.072265] -(6)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90510.072309] (4)[6931:kworker/u16:8]aw8697_vibrator_work_routine enter
<6>[90510.072319] (4)[6931:kworker/u16:8]aw8697_vibrator_work_routine: effect_id =
8 state=1 activate_mode = 0 duration = 0
<7>[90510.072531] (4)[6931:kworker/u16:8]aw8697_haptic_stop enter
<7>[90510.073226] (4)[6931:kworker/u16:8]aw8697_haptic_play_mode enter
<7>[90510.074121] (4)[6931:kworker/u16:8]aw8697_haptic_ram_vbat_comp: enter
<7>[90510.074828] (4)[6931:kworker/u16:8]aw8697_haptic_play_mode enter
<7>[90510.075483] (4)[6931:kworker/u16:8]aw8697_haptic_active enter
<7>[90510.077481] (5)[6931:kworker/u16:8]aw8697_haptic_effect_strength enter
<7>[90510.077490] (5)[6931:kworker/u16:8]aw8697_haptic_effect_strength: aw8697-
>play.vmax_mv =0x7fff
<6>[90510.077494] (5)[6931:kworker/u16:8]aw8697_haptic_effect_strength: aw8697-
>level =0x80
<7>[90510.077507] (5)[6931:kworker/u16:8]aw8697_haptic_set_gain: disable
compsensation, vbat=3907, vbat_min=3500, vbat_ref=4150
<7>[90510.077715] (5)[6931:kworker/u16:8]aw8697_haptic_start enter
<6>[90510.079359] (1)[1367:AALMain]lm36273_brightness_set: bl level = 2011, tmp_bl
= 1923, hbm level = 0
<6>[90510.095856] (1)[1367:AALMain]lm36273_brightness_set: bl level = 2015, tmp_bl
= 1924, hbm level = 0
<5>[90510.123804] (7)[31866:kworker/7:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90510.128970] (7)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<7>[90510.143495] -(7)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=8 ,
activate_mode = 0 val = 0
<7>[90510.143504] -(7)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90510.143537] (7)[6931:kworker/u16:8]aw8697_vibrator_work_routine enter
<6>[90510.143543] (7)[6931:kworker/u16:8]aw8697_vibrator_work_routine: effect_id =
8 state=0 activate_mode = 0 duration = 0
<7>[90510.143806] (7)[6931:kworker/u16:8]aw8697_haptic_stop enter
<7>[90510.143961] (7)[901:vendor.xiaomi.h]aw8697_haptics_erase: enter
<6>[90510.144260] (2)[1367:AALMain]lm36273_brightness_set: bl level = 2021, tmp_bl
= 1925, hbm level = 0
<7>[90510.144494] (4)[6931:kworker/u16:8]aw8697_haptic_play_mode enter
<5>[90510.145857] (7)[31866:kworker/7:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90510.147033] (5)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90510.150486] (0)[123:irq/244-mt6358-]mt6358-pmic 10026000.pwrap:mt6359-pmic:
Reg[0x91c]=0x4,name=pwrkey_r,hwirq=50,type=4
<5>[90510.161365] (7)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90510.162341] -(4)[1494:Binder:1454_1]CPU4: update max cpu_capacity 692
<5>[90510.163974] (7)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<4>[90510.165227] -(7)[8:rcu_preempt]CPU7: update max cpu_capacity 784
<6>[90510.184753] (3)[3825:[email protected]]i2c i2c-7:
error:addr=0x8,irq_stat=0x3,ch_offset=0x0,mask:0x12f
<6>[90510.184770] (3)[3825:[email protected]]i2c_dump_info: +++++++++++++++++++
<6>[90510.184778] (3)[3825:[email protected]]I2C structure:
<6>[90510.184778] [I2C]Clk=24960000,Id=7,Op=0x1,Irq_stat=0x3,Total_len=0x4
<6>[90510.184778] [I2C]Trans_len=0x4,Trans_num=0x1,Trans_auxlen=0x0,
<6>[90510.184778] [I2C]speed=400000,Trans_stop=1,cg_cnt=1,hs_only=0,
<6>[90510.184778] [I2C]ch_offset=0x0,ch_offset_default=0x0
<6>[90510.184788] (3)[3825:[email protected]]base addr:0x000000006b2b0d37
<6>[90510.184809] (3)[3825:[email protected]]I2C register:
<6>[90510.184809] [I2C]SLAVE_ADDR=0x10,INTR_MASK=0x0,INTR_STAT=0x0,
<6>[90510.184809] [I2C]CONTROL=0x28,TRANSFER_LEN=0x4,TRANSAC_LEN=0x1,
<6>[90510.184809] [I2C]DELAY_LEN=0xa,TIMING=0x405,LTIMING=0x23,START=0x0
<6>[90510.184809] [I2C]FIFO_STAT=0x0,IO_CONFIG=0x3,HS=0x0
<6>[90510.184809] [I2C]DCM_EN=0x0,DEBUGSTAT=0x700,EXT_CONF=0x1801
<6>[90510.184809] [I2C]TRANSFER_LEN_AUX=0x0,OFFSET_DMA_FSM_DEBUG=0x8700
<6>[90510.184809] [I2C]OFFSET_MCU_INTR=0x1
<6>[90510.184825] (3)[3825:[email protected]]before enable DMA
register(0xffffff800eda1600):
<6>[90510.184825] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90510.184825] [I2C]STOP=0x0,FLUSH=0x0,CON=0x1d,
<6>[90510.184825] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0xa798000
<6>[90510.184825] [I2C]TX_LEN=0x0,RX_LEN=0xb,INT_BUF_SIZE=0x0,
<6>[90510.184825] [I2C]DEBUGSTA=0xa0a0a00,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x2
<6>[90510.184841] (3)[3825:[email protected]]DMA register(0x0000000020f5953a):
<6>[90510.184841] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90510.184841] [I2C]STOP=0x0,FLUSH=0x0,CON=0x8,
<6>[90510.184841] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0x0,
<6>[90510.184841] [I2C]TX_LEN=0x0,RX_LEN=x0,INT_BUF_SIZE=0x0,
<6>[90510.184841] [I2C]DEBUGSTA=0x0,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x0
<6>[90510.184850] (3)[3825:[email protected]]i2c_dump_info: -----------------------
<6>[90510.184855] (3)[3825:[email protected]]i2c i2c-7: last transfer info:
<6>[90510.184862] (3)[3825:[email protected]]i2c i2c-7: [00] [90510.184742]
SLAVE_ADDR=10,INTR_STAT=3,CONTROL=28,FIFO_STAT=483,DEBUGSTAT=300, tmo=500
<6>[90510.184869] (3)[3825:[email protected]]i2c i2c-7: [01] [90446.469463]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=42,DEBUGSTAT=300, tmo=500
<6>[90510.184875] (3)[3825:[email protected]]i2c i2c-7: [02] [90446.469153]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90510.184882] (3)[3825:[email protected]]i2c i2c-7: [03] [90446.468749]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1ce0,DEBUGSTAT=700, tmo=500
<6>[90510.184888] (3)[3825:[email protected]]i2c i2c-7: [04] [90446.464336]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=21,DEBUGSTAT=300, tmo=500
<6>[90510.184895] (3)[3825:[email protected]]i2c i2c-7: [05] [90446.463972]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90510.184902] (3)[3825:[email protected]]i2c i2c-7: [06] [90446.463499]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1080,DEBUGSTAT=700, tmo=500
<6>[90510.184908] (3)[3825:[email protected]]i2c i2c-7: [07] [90446.458012]
SLAVE_ADDR=10,INTR_STAT=3,CONTROL=28,FIFO_STAT=483,DEBUGSTAT=300, tmo=500
<6>[90510.184914] (3)[3825:[email protected]]i2c i2c-7: [08] [90435.885696]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=42,DEBUGSTAT=300, tmo=499
<6>[90510.184921] (3)[3825:[email protected]]i2c i2c-7: [09] [90435.885439]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90510.184926] (3)[3825:[email protected]]i2c i2c-7: i2c_gpio_dump_info +++++++++
++++++++++
<6>[90510.184935] (3)[3825:[email protected]]i2c i2c-7: I2C gpio structure:
<6>[90510.184935] [I2C]EH_CFG=0x3fffffff,PU_CFG=0x30007e1f,RSEL_CFG=0xffffff
<6>[90510.184941] (3)[3825:[email protected]]i2c i2c-7: addr:0x8,ACK error
<3>[90510.184968] (3)[3825:[email protected]]st21nfc_dev_write : i2c_master_send
returned -121
<6>[90510.195304] (3)[1367:AALMain]lm36273_brightness_set: bl level = 2027, tmp_bl
= 1926, hbm level = 0
<6>[90510.244323] (0)[1367:AALMain]lm36273_brightness_set: bl level = 2033, tmp_bl
= 1927, hbm level = 0
<14>[90510.281706] (4)[1:init]init: starting service 'mdnsd'...
<14>[90510.282011] (4)[1:init]init: Created socket '/dev/socket/mdnsd', mode 660,
user 1020, group 3003
<5>[90510.285417] (4)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<14>[90510.286697] (4)[1:init]init: Control message: Processed ctl.start for
'mdnsd' from pid: 837 (/system/bin/netd)
<4>[90510.289493] -(7)[3756:Binder:1454_8]CPU7: update max cpu_capacity 631
<6>[90510.292579] (2)[1367:AALMain]lm36273_brightness_set: bl level = 2039, tmp_bl
= 1928, hbm level = 0
<6>[90510.342762] (3)[1367:AALMain]lm36273_brightness_set: bl level = 2045, tmp_bl
= 1929, hbm level = 0
<3>[90510.345508] (2)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<6>[90510.359238] (3)[1367:AALMain]lm36273_brightness_set: bl level = 2047, tmp_bl
= 1930, hbm level = 0
<6>[90510.369269] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90510.411503] (2)[23427:kworker/2:2][bq27z561] fg_update_status:
SOC:59,Volt:3937,Cur:183,Temp:352,RM:2228,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90510.411565] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90510.412555] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90510.412847] (4)[118:pd_dbg_info]///PD dbg info 128d
<5>[90510.412858] (4)[118:pd_dbg_info]<90510.412>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90510.412858] <90510.412>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90510.419081] (2)[30082:kworker/2:1]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<4>[90510.461061] -(6)[4630:MiuiKeyguardPic]CPU6: update max cpu_capacity 826
<4>[90510.497317] -(6)[4630:MiuiKeyguardPic]CPU6: update max cpu_capacity 476
<4>[90510.503090] -(7)[1957:presentFence]CPU7: update max cpu_capacity 631
<5>[90510.641771] (4)[7539:kworker/u17:0][Power/PPM] Shrink 27 PPM logs from last
517 ms!
<5>[90510.641803] (4)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(12)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90510.659528] (6)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(10)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90510.686675] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SC_SCP2SPM_WAKEUP_B, timer_out = 464260, r13 = 0x84000880, debug_flag =
0xf8061bff 0x4001e66e, connectivity sleep, modem sleep, subsys sleep r12 = 0x800,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x247e7ff, req_sta = 0x1c00000
0x0 0x7c100017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc38400 0x0 0xc38000 0xc38000, req = 0x0,
clk_settle = 0x60fe,
<6>[90510.686750] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<5>[90510.691255] (6)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(12)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90510.708169] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(11)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90510.724638] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(10)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90510.875886] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90510.878072] -(6)[3662:WifiScanningSer]alarmtimer_enqueue: 34 callbacks
suppressed
<5>[90510.878081] -(6)[3662:WifiScanningSer]alarmtimer_enqueue, 218287262000000
<5>[90511.150982] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90511.151038] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90511.160841] (6)[7539:kworker/u17:0][Power/PPM] Shrink 8 PPM logs from last
519 ms!
<5>[90511.160863] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<4>[90511.173164] (7)[4001:m.android.phone]CPU7: update max cpu_capacity 953
<6>[90511.389467] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90511.709496] (3)[7406:kworker/3:2]sd 0:0:0:0: [sda] Synchronizing SCSI cache
<5>[90511.709775] (3)[30078:kworker/3:3]sd 0:0:0:1: [sdb] Synchronizing SCSI cache
<3>[90511.711630] (3)[7406:kworker/3:2]ghr: scsi_execute exit ret = 0x0
<3>[90511.711697] (3)[30078:kworker/3:3]ghr: scsi_execute exit ret = 0x0
<6>[90511.881414] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90511.992776] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(6)(1)(1)
<5>[90511.997064] (6)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(13)(3)(3) (15)(14)(1)(1)
<5>[90512.014605] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.026354] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(7)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.046268] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(9)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90512.413382] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90512.477253] (5)[4028:ndroid.systemui][ccci0/dpmaif]
[dpmaif_traffic_monitor_func] g_dp_uid_mask_count = 0
<4>[90512.488247] -(7)[930:surfaceflinger]CPU7: update max cpu_capacity 631
<5>[90512.498970] (6)[6964:kworker/6:2][Power/PPM] Shrink 20 PPM logs from last
506 ms!
<5>[90512.498994] (6)[6964:kworker/6:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90512.559027] (2)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(5)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.576574] (2)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(11)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.597976] (2)[23427:kworker/2:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90512.599384] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(7)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90512.733212] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:0%, syspll:0%, bus26m:13%
<6>[90512.733322] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14994)
<6>[90512.733344] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90512.733354] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14994)
<6>[90512.733369] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90512.733378] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:14994)
<6>[90512.733392] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(33891,33924210,5521), tx=(13645,2369,11276), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90512.733476] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<5>[90512.744448] (2)[27694:kworker/u17:1][Power/PPM] Shrink 1 PPM logs from last
245 ms!
<5>[90512.744491] (2)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(12)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.758404] (2)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(13)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.828242] (3)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(12)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.858026] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(13)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90512.894833] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(12)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90512.897298] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90512.935774] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90512.972156] -(2)[1494:Binder:1454_1]alarmtimer_enqueue, 218275598000000
<5>[90513.151218] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90513.151307] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90513.152066] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90513.274326] (2)[23427:kworker/2:2][Power/PPM] Shrink 2 PPM logs from last
529 ms!
<5>[90513.274368] (2)[23427:kworker/2:2][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90513.347217] (2)[8080:displayfeature@][mi_disp:mi_dsi_panel_set_disp_param]
[2022-12-15 05:52:24.799706] [info]panel feature: lcd_hbm, value: 3
<6>[90513.347259] (2)[8080:displayfeature@][mi_disp:mi_dsi_panel_set_disp_param]
[info]DISP_FEATURE_LCD_HBM=3
<6>[90513.347275] (2)[8080:displayfeature@]hbm_brightness_set: HBM_L3_ON
<6>[90513.347881] (2)[8080:displayfeature@]lm36273_brightness_set: bl level =
2047, tmp_bl = 1995, hbm level = 3
<36>[90513.358663] (2)[576:logd.auditd]type=1400 audit(1671083544.809:1623306):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<4>[90513.385389] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu: 567,
569, 600, 613, 537, 582, 536, 408, success counter cpu: 64, 83, 78, 75, 117, 117,
76, 98, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 104, 143,
124, 115, 204, 174, 102, 144, o: 0-2,4-7, p: , f: 3, t: 90513512000000,
90513516000000, 90513512000000, 90513512000000, 90513515631417, 90514140000000,
90513549550239, 90513852000000,
<6>[90513.437654] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<4>[90513.447578] -(4)[1271:app]CPU4: update max cpu_capacity 826
<5>[90513.661276] (3)[30078:kworker/3:3]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90513.666175] (3)[30078:kworker/3:3]ghr: scsi_execute exit ret = 0x0
<6>[90513.666251] (3)[30078:kworker/3:3]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90513.666264] (3)[30078:kworker/3:3]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90513.666669] (3)[30078:kworker/3:3]ufshcd bootdevice: rs,ret 0,409 us
<6>[90513.904685] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90514.013161] (5)[0:swapper/5][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<36>[90514.080992] (2)[576:logd.auditd]type=1400 audit(1671083545.529:1623307):
avc: denied { read } for comm="Thread-57" name="u:object_r:oem_unlock_prop:s0"
dev="tmpfs" ino=9045 scontext=u:r:untrusted_app:s0:c1,c257,c512,c768
tcontext=u:object_r:oem_unlock_prop:s0 tclass=file permissive=0
app=com.michatapp.im
<36>[90514.271069] (1)[576:logd.auditd]type=1400 audit(1671083545.721:1623308):
avc: denied { search } for comm="Thread-57" name="input" dev="tmpfs" ino=33
scontext=u:r:untrusted_app:s0:c1,c257,c512,c768 tcontext=u:object_r:input_device:s0
tclass=dir permissive=0 app=com.michatapp.im
<36>[90514.364734] (1)[576:logd.auditd]type=1400 audit(1671083545.813:1623309):
avc: denied { bind } for comm="ip" scontext=u:r:untrusted_app:s0:c1,c257,c512,c768
tcontext=u:r:untrusted_app:s0:c1,c257,c512,c768 tclass=netlink_route_socket
permissive=0 bug=b/155595000 app=com.michatapp.im
<6>[90514.425953] (0)[8110:cmd]binder: 8110:8110 ioctl 40046210 7ff21a72f4
returned -22
<36>[90514.449327] (1)[576:logd.auditd]type=1400 audit(1671083545.897:1623310):
avc: denied { search } for comm="Thread-57" name="net" dev="sysfs" ino=27050
scontext=u:r:untrusted_app:s0:c1,c257,c512,c768 tcontext=u:object_r:sysfs_net:s0
tclass=dir permissive=0 app=com.michatapp.im
<6>[90514.461586] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90514.769974] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(4)(3)(3) (11)(5)(1)(1)
<5>[90514.772770] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90514.773718] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<4>[90514.777163] -(7)[4550:mali-mem-purge]CPU7: update max cpu_capacity 934
<5>[90514.781762] (3)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(2)(2)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<5>[90514.781852] (3)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(7)(7)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90514.804476] -(7)[1901:miui-gesture]CPU7: update max cpu_capacity 784
<5>[90514.894528] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(9)(9)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90514.895521] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90514.895741] -(7)[11709:input_monitor_m]CPU7: update max cpu_capacity 631
<6>[90514.912756] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90514.959865] (3)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90514.961409] -(5)[4559:mali-cmar-backe]CPU5: update max cpu_capacity 826
<5>[90514.964033] (3)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(13)(3)(3) (15)(14)(1)(1)
<4>[90514.967685] -(5)[1611:android.ui]CPU5: update max cpu_capacity 557
<4>[90514.970983] -(7)[11709:input_monitor_m]CPU7: update max cpu_capacity 631
<5>[90514.987244] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90515.059587] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(9)(9)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90515.151441] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90515.151494] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90515.357702] (3)[30078:kworker/3:3][Power/PPM] Shrink 7 PPM logs from last
463 ms!
<5>[90515.357725] (3)[30078:kworker/3:3][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90515.358755] (1)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(9)(9)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90515.405468] (2)[23427:kworker/2:2][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90515.406653] (3)[7668:kworker/u17:2][Power/PPM] (0x280)(-1)(0)(0-7)(9)(9)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90515.472775] (2)[23427:kworker/2:2][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90515.485290] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90515.608448] -(2)[30622:bt_hci_thread]alarmtimer_enqueue, 218281236000000
<5>[90515.610145] -(5)[30623:HwBinder:30518_]alarmtimer_enqueue, 218727855000000
<5>[90515.613552] -(4)[30622:bt_hci_thread]alarmtimer_enqueue, 218281241000000
<5>[90515.614564] -(0)[30623:HwBinder:30518_]alarmtimer_enqueue, 218727855000000
<5>[90515.620032] -(7)[30622:bt_hci_thread]alarmtimer_enqueue, 218281247000000
<6>[90515.668451] (2)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90515.668476] (2)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x00000000], desc[BLE_SCAN]
<6>[90515.735431] (1)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90515.735455] (1)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x19991999], desc[BLE_SCAN]
<6>[90515.737997] (0)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90515.738022] (0)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x00000000], desc[BLE_SCAN]
<6>[90515.744136] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl:
cmd[0x4008b004]
<6>[90515.744166] (5)[30725:HwBinder:845_2][btmtk_info] BT_unlocked_ioctl: id[1],
value[0x04900124], desc[BLE_SCAN]
<6>[90515.805240] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 69, r13 = 0x84000c80, debug_flag = 0xf8040000
0x40000002, connectivity sleep, modem sleep, subsys not sleep r12 = 0x40, r12_ext =
0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24563f3, req_sta = 0x15c00000 0x180000
0x50000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req = 0x1a,
clk_settle = 0x60fe,
<6>[90515.805623] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90515.917826] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90516.509315] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90516.516124] (3)[30078:kworker/3:3]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90516.516156] (3)[30078:kworker/3:3]ufshcd bootdevice: rr,ret 0,1774 us
<5>[90516.688005] (6)[7539:kworker/u17:0][Power/PPM] Shrink 3 PPM logs from last
1330 ms!
<5>[90516.688027] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90516.731039] (3)[1888:CachedAppOptimi]stop reclaim: force
<5>[90516.837876] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90516.925038] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90517.124750] (1)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(13)(3)(3) (15)(14)(1)(1)
<5>[90517.135682] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(9)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90517.150490] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(11)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90517.151662] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90517.151735] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<6>[90517.533805] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90517.597176] (2)[0:swapper/2][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<5>[90517.628817] (3)[30078:kworker/3:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90517.688954] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(11)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<3>[90517.822817] (1)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90517.828858] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90517.932865] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90517.971204] -(7)[1957:presentFence]CPU7: update max cpu_capacity 701
<4>[90517.972547] -(6)[1893:AlarmManager]alarmtimer_enqueue: 36 callbacks
suppressed
<5>[90517.972552] -(6)[1893:AlarmManager]alarmtimer_enqueue, 218287262000000
<3>[90517.985483] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90518.360085] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(11)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90518.387755] -(4)[0:swapper/4][name:bc&]tick broadcast enter counter cpu: 912,
947, 985, 775, 729, 1112, 1075, 962, success counter cpu: 95, 113, 80, 76, 101,
118, 97, 110, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 200,
199, 152, 141, 188, 222, 160, 167, o: 2,5-7, p: , f: , t: 90518516000000,
90518514806778, 90518556000000, 90518516000000, 90518516000000, 90518515411896,
90518516000000, 90518515949648,
<4>[90518.389632] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 631
<5>[90518.404104] (1)[25366:kworker/1:4][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90518.406645] -(7)[1696:Binder:930_4]CPU7: update max cpu_capacity 934
<5>[90518.458732] (5)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(4)(3)(3) (11)(5)(1)(1)
<5>[90518.459598] (5)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90518.475425] (3)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(7)(7)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90518.507703] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 784
<4>[90518.507971] -(6)[1901:miui-gesture]CPU6: update max cpu_capacity 826
<36>[90518.529322] (1)[576:logd.auditd]type=1400 audit(1671083549.977:1623311):
avc: denied { search } for comm="MiuiKeyguardPic" name="mcd" dev="dm-13" ino=340
scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:mcd_data_file:s0
tclass=dir permissive=0 app=com.miui.miwallpaper
<6>[90518.557285] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90518.564244] (0)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90518.581045] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90518.586740] -(6)[1271:app]CPU6: update max cpu_capacity 476
<4>[90518.590663] -(7)[930:surfaceflinger]CPU7: update max cpu_capacity 631
<3>[90518.602160] (0)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<4>[90518.718881] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 701
<5>[90518.807024] (3)[30078:kworker/3:3][Power/PPM] Shrink 8 PPM logs from last
446 ms!
<5>[90518.807043] (3)[30078:kworker/3:3][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(4)(3)(3) (13)(5)(1)(1)
<5>[90518.821277] (2)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<36>[90518.826259] (3)[576:logd.auditd]type=1400 audit(1671083550.277:1623312):
avc: denied { search } for comm="ImageWallpaper" name="mcd" dev="dm-13" ino=340
scontext=u:r:platform_app:s0:c512,c768 tcontext=u:object_r:mcd_data_file:s0
tclass=dir permissive=0 app=com.miui.miwallpaper
<5>[90518.838895] (1)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<4>[90518.841569] -(6)[940:mtkPowerWorker]CPU6: update max cpu_capacity 826
<4>[90518.845522] -(7)[4061:Binder:4028_3]CPU7: update max cpu_capacity 934
<3>[90518.893758] (2)[936:HwBinder:851_2][ION][ion_dbg] alloc_pages order=4
cache=0
<6>[90518.950149] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90518.953162] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x20,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518953157952,15000000]
<6>[90518.953167] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xa0,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518953163490,14999994]
<6>[90518.953169] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0xe0,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518953166952,14999990]
<6>[90518.953173] (5)[436:wdtk-5][thread:436][RT:90518953171183] 2022-12-15
05:52:30.405693 UTC;android time 2022-12-15 12:52:30.405693
<6>[90518.953180] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0xe2,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518953175260,14999982]
<6>[90518.953296] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0xea,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518953290952,14999866]
<6>[90518.953436] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0xee,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518953431183,14999726]
<6>[90518.954009] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0xef,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518954003798,14999154]
<6>[90518.955051] (4)[435:wdtk-4][wdk-k]
cpu=4,lbit=0xff,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90518955047260,14998110]
<6>[90518.976408] (2)[857:[email protected]][NVT-ts-spi] nvt_palm_sensor_write 1735:
enter 0 1
<6>[90518.976424] (2)[857:[email protected]][NVT-ts-spi] nvt_set_pocket_palm_switch
580: set pocket palm switch: 0
<6>[90519.017561] (3)[857:[email protected]][NVT-ts-spi] nvt_set_pocket_palm_switch
611: nvt_set_pocket_palm_switch --
<6>[90519.017577] (3)[857:[email protected]]palm_sensor_store value:0
<6>[90519.020567] (0)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_i2s_hd_set(), kcontrol name I2S3_HD_Mux, hd_en 1
<7>[90519.022057] (2)[17656:writer]speaker_amp 6-0040: fw_name:cs35l41-delta-spk-
music.txt
<7>[90519.022071] (2)[17656:writer]speaker_amp 6-0040: data_ctl_len:14
<7>[90519.022418] (2)[17656:writer]speaker_amp 6-0040: DSP1: Read 4 bytes from
2800254
<7>[90519.023928] (3)[17656:writer]speaker_amp 6-0040: DSP1: Wrote 56 bytes to
3400038
<7>[90519.023937] (3)[17656:writer]speaker_amp 6-0040: Wrote 14 reg for
CSPL_UPDATE_PARAMS_CONFIG
<5>[90519.025391] -(4)[1620:android.display]alarmtimer_enqueue, 218287262000000
<5>[90519.025491] -(4)[1620:android.display]alarmtimer_enqueue, 218287262000000
<7>[90519.028202] (2)[17656:writer]speaker_amp 6-0040: DSP1: Read 56 bytes from
3400038
<7>[90519.028211] (2)[17656:writer]speaker_amp 6-0040: read
CSPL_UPDATE_PARAMS_CONFIG:
<7>[90519.028214] (2)[17656:writer]speaker_amp 6-0040: 14
<7>[90519.028217] (2)[17656:writer]speaker_amp 6-0040: 4
<7>[90519.028220] (2)[17656:writer]speaker_amp 6-0040: 768
<7>[90519.028223] (2)[17656:writer]speaker_amp 6-0040: 1236
<7>[90519.028226] (2)[17656:writer]speaker_amp 6-0040: 0
<7>[90519.028229] (2)[17656:writer]speaker_amp 6-0040: 0
<7>[90519.028232] (2)[17656:writer]speaker_amp 6-0040: 0
<7>[90519.028235] (2)[17656:writer]speaker_amp 6-0040: 2
<7>[90519.028238] (2)[17656:writer]speaker_amp 6-0040: 11
<7>[90519.028241] (2)[17656:writer]speaker_amp 6-0040: 5280315
<7>[90519.028243] (2)[17656:writer]speaker_amp 6-0040: 0
<7>[90519.028246] (2)[17656:writer]speaker_amp 6-0040: 41
<7>[90519.028249] (2)[17656:writer]speaker_amp 6-0040: 0
<7>[90519.028252] (2)[17656:writer]speaker_amp 6-0040: 15498670
<7>[90519.028551] (2)[17656:writer]speaker_amp 6-0040: DSP1: Wrote 4 bytes to
2800254
<7>[90519.028856] (2)[17656:writer]speaker_amp 6-0040: DSP1: Read 4 bytes from
2800258
<7>[90519.028861] (2)[17656:writer]speaker_amp 6-0040: CSPL STATE == RUNNING (0
attempt)
<7>[90519.029173] (2)[17656:writer]speaker_amp 6-0042: fw_name:cs35l41-delta-rcv-
music.txt
<7>[90519.029183] (2)[17656:writer]speaker_amp 6-0042: data_ctl_len:14
<7>[90519.029503] (2)[17656:writer]speaker_amp 6-0042: DSP1: Read 4 bytes from
2800254
<7>[90519.030987] (4)[17656:writer]speaker_amp 6-0042: DSP1: Wrote 56 bytes to
3400038
<7>[90519.030992] (4)[17656:writer]speaker_amp 6-0042: Wrote 14 reg for
CSPL_UPDATE_PARAMS_CONFIG
<7>[90519.035722] (1)[17656:writer]speaker_amp 6-0042: DSP1: Read 56 bytes from
3400038
<7>[90519.035731] (1)[17656:writer]speaker_amp 6-0042: read
CSPL_UPDATE_PARAMS_CONFIG:
<7>[90519.035735] (1)[17656:writer]speaker_amp 6-0042: 14
<7>[90519.035738] (1)[17656:writer]speaker_amp 6-0042: 4
<7>[90519.035741] (1)[17656:writer]speaker_amp 6-0042: 768
<7>[90519.035744] (1)[17656:writer]speaker_amp 6-0042: 1236
<7>[90519.035747] (1)[17656:writer]speaker_amp 6-0042: 0
<7>[90519.035749] (1)[17656:writer]speaker_amp 6-0042: 0
<7>[90519.035752] (1)[17656:writer]speaker_amp 6-0042: 0
<7>[90519.035755] (1)[17656:writer]speaker_amp 6-0042: 2
<7>[90519.035758] (1)[17656:writer]speaker_amp 6-0042: 16
<7>[90519.035761] (1)[17656:writer]speaker_amp 6-0042: 5280315
<7>[90519.035764] (1)[17656:writer]speaker_amp 6-0042: 0
<7>[90519.035767] (1)[17656:writer]speaker_amp 6-0042: 46
<7>[90519.035770] (1)[17656:writer]speaker_amp 6-0042: 0
<7>[90519.035773] (1)[17656:writer]speaker_amp 6-0042: 10306794
<7>[90519.036075] (4)[17656:writer]speaker_amp 6-0042: DSP1: Wrote 4 bytes to
2800254
<7>[90519.036406] (1)[17656:writer]speaker_amp 6-0042: DSP1: Read 4 bytes from
2800258
<7>[90519.036415] (1)[17656:writer]speaker_amp 6-0042: CSPL STATE == RUNNING (0
attempt)
<6>[90519.036948] (1)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_runtime_resume()
<6>[90519.036965] (1)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_enable_clock()
<7>[90519.037295] (1)[17656:writer]++++>CSPL: cs35l41_pcm_startup.
<7>[90519.037301] (1)[17656:writer]++++>CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<7>[90519.037310] (1)[17656:writer]---->CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<7>[90519.037313] (1)[17656:writer]++++>CSPL: cs35l41_pcm_startup.
<7>[90519.037316] (1)[17656:writer]++++>CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<7>[90519.037321] (1)[17656:writer]---->CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<6>[90519.038124] (2)[23427:kworker/2:2]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_runtime_suspend()
<6>[90519.038148] (2)[23427:kworker/2:2]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_disable_clock()
<6>[90519.040114] (2)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_runtime_resume()
<6>[90519.040130] (2)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_enable_clock()
<6>[90519.040266] (3)[3825:[email protected]]i2c i2c-7:
error:addr=0x8,irq_stat=0x3,ch_offset=0x0,mask:0x12f
<6>[90519.040275] (3)[3825:[email protected]]i2c_dump_info: +++++++++++++++++++
<6>[90519.040283] (3)[3825:[email protected]]I2C structure:
<6>[90519.040283] [I2C]Clk=24960000,Id=7,Op=0x1,Irq_stat=0x3,Total_len=0x4
<6>[90519.040283] [I2C]Trans_len=0x4,Trans_num=0x1,Trans_auxlen=0x0,
<6>[90519.040283] [I2C]speed=400000,Trans_stop=1,cg_cnt=1,hs_only=0,
<6>[90519.040283] [I2C]ch_offset=0x0,ch_offset_default=0x0
<6>[90519.040293] (3)[3825:[email protected]]base addr:0x000000006b2b0d37
<6>[90519.040314] (3)[3825:[email protected]]I2C register:
<6>[90519.040314] [I2C]SLAVE_ADDR=0x10,INTR_MASK=0x0,INTR_STAT=0x0,
<6>[90519.040314] [I2C]CONTROL=0x28,TRANSFER_LEN=0x4,TRANSAC_LEN=0x1,
<6>[90519.040314] [I2C]DELAY_LEN=0xa,TIMING=0x405,LTIMING=0x23,START=0x0
<6>[90519.040314] [I2C]FIFO_STAT=0x0,IO_CONFIG=0x3,HS=0x0
<6>[90519.040314] [I2C]DCM_EN=0x0,DEBUGSTAT=0x700,EXT_CONF=0x1801
<6>[90519.040314] [I2C]TRANSFER_LEN_AUX=0x0,OFFSET_DMA_FSM_DEBUG=0x8700
<6>[90519.040314] [I2C]OFFSET_MCU_INTR=0x1
<6>[90519.040330] (3)[3825:[email protected]]before enable DMA
register(0xffffff800eda1600):
<6>[90519.040330] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90519.040330] [I2C]STOP=0x0,FLUSH=0x0,CON=0x1d,
<6>[90519.040330] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0xa798000
<6>[90519.040330] [I2C]TX_LEN=0x0,RX_LEN=0xb,INT_BUF_SIZE=0x0,
<6>[90519.040330] [I2C]DEBUGSTA=0xa0a0a00,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x2
<6>[90519.040346] (3)[3825:[email protected]]DMA register(0x0000000020f5953a):
<6>[90519.040346] [I2C]INT_FLAG=0x0,INT_EN=0x0,EN=0x0,RST=0x0,
<6>[90519.040346] [I2C]STOP=0x0,FLUSH=0x0,CON=0x8,
<6>[90519.040346] [I2C]TX_MEM_ADDR=0x0, RX_MEM_ADDR=0x0,
<6>[90519.040346] [I2C]TX_LEN=0x0,RX_LEN=x0,INT_BUF_SIZE=0x0,
<6>[90519.040346] [I2C]DEBUGSTA=0x0,TX_MEM_ADDR2=0x0, RX_MEM_ADDR2=0x0
<6>[90519.040355] (3)[3825:[email protected]]i2c_dump_info: -----------------------
<7>[90519.040360] (2)[17656:writer]++++>CSPL: cs35l41_pcm_startup.
<6>[90519.040362] (3)[3825:[email protected]]i2c i2c-7: last transfer info:
<6>[90519.040368] (3)[3825:[email protected]]i2c i2c-7: [00] [90519.040261]
SLAVE_ADDR=10,INTR_STAT=3,CONTROL=28,FIFO_STAT=483,DEBUGSTAT=300, tmo=500
<6>[90519.040373] (3)[3825:[email protected]]i2c i2c-7: [01] [90510.192695]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=42,DEBUGSTAT=300, tmo=500
<6>[90519.040378] (3)[3825:[email protected]]i2c i2c-7: [02] [90510.192531]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90519.040382] (3)[3825:[email protected]]i2c i2c-7: [03] [90510.192248]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1ce0,DEBUGSTAT=700, tmo=500
<6>[90519.040387] (3)[3825:[email protected]]i2c i2c-7: [04] [90510.190172]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=21,DEBUGSTAT=300, tmo=500
<6>[90519.040392] (3)[3825:[email protected]]i2c i2c-7: [05] [90510.190008]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90519.040397] (3)[3825:[email protected]]i2c i2c-7: [06] [90510.189493]
SLAVE_ADDR=10,INTR_STAT=1,CONTROL=28,FIFO_STAT=1080,DEBUGSTAT=700, tmo=500
<6>[90519.040402] (3)[3825:[email protected]]i2c i2c-7: [07] [90510.184742]
SLAVE_ADDR=10,INTR_STAT=3,CONTROL=28,FIFO_STAT=483,DEBUGSTAT=300, tmo=500
<6>[90519.040406] (3)[3825:[email protected]]i2c i2c-7: [08] [90446.469463]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=42,DEBUGSTAT=300, tmo=500
<6>[90519.040411] (3)[3825:[email protected]]i2c i2c-7: [09] [90446.469153]
SLAVE_ADDR=11,INTR_STAT=1,CONTROL=28,FIFO_STAT=84,DEBUGSTAT=300, tmo=500
<6>[90519.040414] (3)[3825:[email protected]]i2c i2c-7: i2c_gpio_dump_info +++++++++
++++++++++
<7>[90519.040420] (2)[17656:writer]++++>CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<6>[90519.040422] (3)[3825:[email protected]]i2c i2c-7: I2C gpio structure:
<6>[90519.040422] [I2C]EH_CFG=0x3fffffff,PU_CFG=0x30007e1f,RSEL_CFG=0xffffff
<6>[90519.040427] (3)[3825:[email protected]]i2c i2c-7: addr:0x8,ACK error
<7>[90519.040436] (2)[17656:writer]---->CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<7>[90519.040440] (2)[17656:writer]++++>CSPL: cs35l41_pcm_startup.
<7>[90519.040442] (2)[17656:writer]++++>CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<7>[90519.040447] (2)[17656:writer]---->CSPL: cs35l41_set_dai_fmt, fmt = 16385.
<3>[90519.040451] (3)[3825:[email protected]]st21nfc_dev_write : i2c_master_send
returned -121
<6>[90519.040504] (2)[17656:writer] I2S3: mt6885_i2s_hw_params_fixup(), fix format
to 32bit
<7>[90519.040512] (2)[17656:writer]++++>CSPL: cs35l41_pcm_hw_params.
<7>[90519.040519] (2)[17656:writer]++++>CSPL: cs35l41_codec_set_sysclk: clk_id =
0, src = 0, freq = 3072000, dir = 0.
<6>[90519.040524] (2)[17656:writer]speaker_amp 6-0040: cs35l41_codec_set_sysclk:
clk_id=0, src=0, freq=3072000
<6>[90519.041638] (2)[17656:writer]speaker_amp 6-0040: cs35l41_codec_set_sysclk:
0x2c04 <== 0x430
<7>[90519.041649] (2)[17656:writer]---->CSPL: cs35l41_codec_set_sysclk.
<7>[90519.041654] (2)[17656:writer]cs35l41_pcm_hw_params rx asp_wl is updated to
be 24.
<7>[90519.041657] (2)[17656:writer]---->CSPL: cs35l41_pcm_hw_params.
<7>[90519.041662] (2)[17656:writer]++++>CSPL: cs35l41_pcm_hw_params.
<7>[90519.041668] (2)[17656:writer]++++>CSPL: cs35l41_codec_set_sysclk: clk_id =
0, src = 0, freq = 3072000, dir = 0.
<6>[90519.041672] (2)[17656:writer]speaker_amp 6-0042: cs35l41_codec_set_sysclk:
clk_id=0, src=0, freq=3072000
<6>[90519.042763] (1)[17656:writer]speaker_amp 6-0042: cs35l41_codec_set_sysclk:
0x2c04 <== 0x430
<7>[90519.042774] (1)[17656:writer]---->CSPL: cs35l41_codec_set_sysclk.
<7>[90519.042779] (1)[17656:writer]cs35l41_pcm_hw_params rx asp_wl is updated to
be 24.
<7>[90519.042782] (1)[17656:writer]---->CSPL: cs35l41_pcm_hw_params.
<6>[90519.042789] (1)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_dai_i2s_config(), id 31, rate 48000, format 10
<6>[90519.042807] (1)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_afe_fe_hw_params(), DL2, using_sram 0, use_dram_only 1, ch 2, rate 48000, fmt
6, dma_addr 0x0000000205740000, dma_area 00000000e19aab05, dma_bytes 0x1000
<6>[90519.042815] (1)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_dram_request(), dram_resource_counter 0
<3>[90519.042872] (2)[17656:writer]get_taskid_by_afe_daiid(), afe_dai_id not
support: 2
<6>[90519.043321] (2)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_apll_event(), name APLL2, event 0x1
<6>[90519.043421] (2)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_i2s_hd_en_event(), name I2S3_HD_EN, event 0x1
<6>[90519.043431] (2)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_i2s_en_event(), name I2S3_EN, event 0x1
<7>[90519.045427] (2)[17656:writer]++++>CSPL: cs35l41_main_amp_event, event = 2.
<7>[90519.050981] (1)[17656:writer]speaker_amp 6-0040: 0: Received ACK in EINT for
mbox cmd (2)
<7>[90519.051915] (3)[17656:writer]----CSPL: cs35l41_main_amp_event.
<7>[90519.052202] (7)[17656:writer]++++>CSPL: cs35l41_main_amp_event, event = 2.
<7>[90519.057798] (1)[17656:writer]speaker_amp 6-0042: 0: Received ACK in EINT for
mbox cmd (2)
<7>[90519.058705] (1)[17656:writer]----CSPL: cs35l41_main_amp_event.
<7>[90519.058778] (1)[17656:writer]speaker_amp 6-0040: cs35l41_digital_mute: 0
<7>[90519.058782] (1)[17656:writer]++++>CSPL: cs35l41_digital_mute, mute = 0.
<7>[90519.059074] (1)[17656:writer]---->CSPL: cs35l41_digital_mute.
<7>[90519.059080] (1)[17656:writer]speaker_amp 6-0042: cs35l41_digital_mute: 0
<7>[90519.059083] (1)[17656:writer]++++>CSPL: cs35l41_digital_mute, mute = 0.
<7>[90519.059368] (6)[17656:writer]---->CSPL: cs35l41_digital_mute.
<3>[90519.059377] (0)[17656:writer]get_taskid_by_afe_daiid(), afe_dai_id not
support: 2
<6>[90519.061192] (1)[17656:writer]adsp_core0_resume(), done elapse 551 us
<6>[90519.061756] (1)[17656:writer]adsp_core1_resume(), done elapse 545 us
<6>[90519.061922] (1)[17656:writer]_adsp_deregister_feature, send suspend work
cid(1), fid(2), delay(225)
<6>[90519.061929] (1)[17656:writer]_adsp_deregister_feature, send suspend work
cid(0), fid(0), delay(275)
<6>[90519.061974] (1)[17656:writer]adsp_core0_resume(), done elapse 0 us
<6>[90519.061980] (1)[17656:writer]adsp_core1_resume(), done elapse 0 us
<6>[90519.062057] (1)[17656:writer]_adsp_deregister_feature, send suspend work
cid(1), fid(2), delay(225)
<6>[90519.062064] -(0)[17656:writer]_adsp_deregister_feature, send suspend work
cid(0), fid(0), delay(275)
<6>[90519.063362] -(0)[17656:writer]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_fe_trigger(), DL2 cmd 1, irq_id 1
<6>[90519.069283] -(1)[3665:ConnectivitySer][ccci1/dpmaif]tx1_resume_tx: 0x140000,
0x100000, 0x0
<6>[90519.069388] -(0)[15675:cebook.services][ccci1/dpmaif]clear txq1_resume_done:
0x140000, 0xc0000, 0x0
<5>[90519.077382] -(7)[3755:Binder:1454_7]alarmtimer_enqueue, 218287262000000
<5>[90519.089641] -(0)[3756:Binder:1454_8]alarmtimer_enqueue, 218287262000000
<5>[90519.111883] -(6)[1495:Binder:1454_2]alarmtimer_enqueue, 218287262000000
<6>[90519.133243] (3)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90519.133696] -(7)[27694:kworker/u17:1][ccci1/fsm]received MD status response
97680043
<6>[90519.133730] (3)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<5>[90519.151835] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90519.151867] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)(4)
(3)(3)(3)(3) (5)(5)(1)(1)
<5>[90519.151883] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90519.151895] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)(4)
(3)(3)(3)(3) (4)(4)(1)(1)
<5>[90519.153630] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<4>[90519.161154] (7)[0:swapper/7]CPU7: update max cpu_capacity 953
<5>[90519.479541] (1)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(3)(3)(3) (13)(4)(1)(1)
<6>[90519.581394] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90519.595602] (6)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<4>[90519.646728] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90519.646764] -(4)[7032:kworker/4:0]active wake lock :
disp_crtc0_wakelock,last_time:90509712
<4>[90519.646780] -(4)[7032:kworker/4:0]active wake lock : 7-
0008,last_time:90519171
<4>[90519.646801] -(4)[7032:kworker/4:0]active wake lock : ttyC0,last_time:90519165
<4>[90519.646810] -(4)[7032:kworker/4:0]active wake lock :
ccmni_md1,last_time:90519253
<4>[90519.646824] -(4)[7032:kworker/4:0]active wake lock :
(null),last_time:90509715
<36>[90519.786834] (3)[576:logd.auditd]type=1400 audit(1671083551.237:1623313):
avc: denied { search } for comm="displayfeature@" name="thermal" dev="sysfs"
ino=27541 scontext=u:r:hal_displayfeature_xiaomi_default:s0
tcontext=u:object_r:sysfs_therm:s0 tclass=dir permissive=0
<5>[90519.847674] (4)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(3)(3)(3) (11)(4)(1)(1)
<5>[90519.847746] (0)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90519.847779] (0)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2600000
<5>[90519.847795] (0)[1039:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)(4)
(10)(0)(3)(3) (11)(4)(1)(1)
<5>[90519.847810] (0)[1039:mi_thermald][Power/PPM] Invalid input: user/cl=8/2,
min/max freq=-1/3000000
<5>[90519.848182] (4)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<6>[90519.905171] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90519.905216] (6)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<3>[90519.942431] (2)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90519.945132] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(9)(0)(4)
(4) (15)(0)(3)(3) (15)(4)(1)(1)
<5>[90519.945703] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<5>[90519.946949] (7)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(0)(3)(3) (13)(4)(1)(1)
<5>[90519.947005] (0)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90519.947033] (0)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2600000
<5>[90519.947052] (0)[1039:mi_thermald][Power/PPM] Invalid input: user/cl=8/2,
min/max freq=-1/3000000
<6>[90519.952848] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90519.965400] (1)[18632:kworker/1:1H]adsp_core1_suspend(), done elapse 191 us
<6>[90520.189392] (0)[1039:mi_thermald]adsp_core0_suspend(), done elapse 203 us
<5>[90520.309054] (0)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90520.309102] (0)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2600000
<5>[90520.309122] (0)[1039:mi_thermald][Power/PPM] Invalid input: user/cl=8/2,
min/max freq=-1/3000000
<5>[90520.309326] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (10)(0)(3)(3) (11)(4)(1)(1)
<5>[90520.310398] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<3>[90520.404183] (2)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90520.405317] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(0)(3)(3) (13)(4)(1)(1)
<5>[90520.405982] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<5>[90520.489765] (5)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90520.491041] (0)[347:battery_thread][bq27z561] fg_update_status:
SOC:59,Volt:3885,Cur:1265,Temp:352,RM:2226,FC:4110,FAST:0,ST:2,NAME:bq27z561
<5>[90520.585888] (0)[347:battery_thread]
[fgauge_read_boot_battery_plug_out_status] rtc_invalid 1 plugout 1
bat_plug_out_time 31 sp3:0x0 pl:0 0
<6>[90520.588483] (1)[347:battery_thread]mt635x-auxadc mt635x-auxadc: name:BATADC,
channel=0, adc_out=0x4ddb, adc_result=3831
<6>[90520.605292] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90520.620474] (4)[347:battery_thread]lbat 0 0 0 0
<5>[90520.620490] (4)[347:battery_thread]car[0,0,0,0,0, cycle_car:0,ncar:0] c:0
1265000 vbat:3831 vbus:0 soc:-1 50 gm3:1 0 0 0
<5>[90520.620507] (4)[347:battery_thread]tmp:35 65535 65535 hcar2:65535
lcar2:65535 time:218278 sw_iavg:0 0 0 nafg_m:0 0 0
<5>[90520.857215] (4)[347:battery_thread]GM3log-nint-nafg 218278 90520 0 0 0 0 0
<5>[90520.857226] (4)[347:battery_thread]FG daemon is disabled
<36>[90520.871675] (3)[576:logd.auditd]type=1400 audit(1671083552.321:1623314):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<6>[90520.925782] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_EINT_EVENT_B, timer_out = 69, r13 = 0xc400fdbc, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem not sleep, subsys not sleep r12 = 0x40,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6143f3, req_sta = 0x17c3d0ff
0x180000 0x50000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x784a55, wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req =
0x1a, clk_settle = 0x60fe,
<6>[90520.925837] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90520.955130] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90521.038265] (4)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90521.038510] (4)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90521.038882] (4)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(2)(4)
(4) (2)(2)(3)(3) (4)(4)(1)(1)
<3>[90521.047605] (2)[613:teei_daemon]ghr: scsi_execute exit ret = 0x0
<3>[90521.047872] (4)[613:teei_daemon]ghr: scsi_execute exit ret = 0x0
<5>[90521.048206] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90521.069151] (7)[0:swapper/7]CPU7: update max cpu_capacity 784
<3>[90521.121204] (5)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90521.122430] (6)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<5>[90521.122786] (6)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90521.125610] -(7)[1620:android.display]CPU7: update max cpu_capacity 701
<5>[90521.135046] (6)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)
(4) (0)(0)(3)(3) (4)(4)(1)(1)
<6>[90521.135141] (6)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 0 to 1 ...
<5>[90521.135150] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<6>[90521.135154] (6)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] enable with
mode 1
<5>[90521.135187] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2600000
<5>[90521.135207] (2)[1039:mi_thermald][Power/PPM] Invalid input: user/cl=8/2,
min/max freq=-1/3000000
<6>[90521.135348] (2)[576:logd.auditd]Task-Turbo: task_turbo_feats is change to 15
successfully
<36>[90521.135998] (2)[576:logd.auditd]type=1400 audit(1671083552.585:1623315):
avc: denied { read } for comm="ps" name="pid_max" dev="proc" ino=8853088
scontext=u:r:untrusted_app:s0:c247,c256,c512,c768
tcontext=u:object_r:proc_pid_max:s0 tclass=file permissive=0
app=com.ss.android.ugc.trill
<4>[90521.137186] -(4)[8:rcu_preempt]CPU4: update max cpu_capacity 917
<4>[90521.143457] -(7)[1957:presentFence]CPU7: update max cpu_capacity 953
<36>[90521.215928] (0)[576:logd.auditd]type=1400 audit(1671083552.661:1623316):
avc: denied { read } for comm="ps" name="pid_max" dev="proc" ino=8853088
scontext=u:r:untrusted_app:s0:c247,c256,c512,c768
tcontext=u:object_r:proc_pid_max:s0 tclass=file permissive=0
app=com.ss.android.ugc.trill
<6>[90521.241054] (5)[8241:gs.intelligenc]binder: 8241:8241 ioctl 40046210
7fcfc60304 returned -22
<6>[90521.273454] (6)[8249:roid.htmlviewe]binder: 8249:8249 ioctl 40046210
7fcfc60304 returned -22
<6>[90521.292329] (4)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 1 to 0 ...
<6>[90521.292336] (4)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] disable with
mode 0
<6>[90521.292561] -(3)[1454:system_server]Task-Turbo: task_turbo_feats is change to
0 successfully
<4>[90521.329995] -(3)[1454:system_server]alarmtimer_enqueue: 18 callbacks
suppressed
<5>[90521.330003] -(3)[1454:system_server]alarmtimer_enqueue, 218287262000000
<5>[90521.330149] -(3)[1454:system_server]alarmtimer_enqueue, 218287262000000
<3>[90521.405360] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90521.414032] -(7)[5449:Binder:1454_1C]alarmtimer_enqueue, 218284041000000
<6>[90521.629243] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90521.764203] (5)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(0)(3)(3) (15)(4)(1)(1)
<6>[90521.957326] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90522.122593] -(4)[1454:system_server]alarmtimer_enqueue, 218284041000000
<5>[90522.122818] -(4)[1454:system_server]alarmtimer_enqueue, 218284041000000
<6>[90522.506474] (0)[1933:HwBinder:844_5]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_i2s_hd_set(), kcontrol name I2S0_HD_Mux, hd_en 0
<6>[90522.506622] (0)[1933:HwBinder:844_5]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_i2s_hd_set(), kcontrol name I2S3_HD_Mux, hd_en 0
<6>[90522.507793] -(0)[1933:HwBinder:844_5]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_fe_trigger(), DL2 cmd 0, irq_id 1
<3>[90522.507861] (0)[1933:HwBinder:844_5]get_taskid_by_afe_daiid(), afe_dai_id
not support: 2
<6>[90522.507871] (0)[1933:HwBinder:844_5]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_dram_release(), dram_resource_counter 1
<7>[90522.507986] (0)[1933:HwBinder:844_5]speaker_amp 6-0040:
cs35l41_digital_mute: 1
<7>[90522.507995] (0)[1933:HwBinder:844_5]++++>CSPL: cs35l41_digital_mute, mute =
1.
<7>[90522.540652] (2)[1933:HwBinder:844_5]---->CSPL: cs35l41_digital_mute.
<7>[90522.540677] (2)[1933:HwBinder:844_5]speaker_amp 6-0042:
cs35l41_digital_mute: 1
<7>[90522.540693] (2)[1933:HwBinder:844_5]++++>CSPL: cs35l41_digital_mute, mute =
1.
<7>[90522.572283] (3)[1933:HwBinder:844_5]---->CSPL: cs35l41_digital_mute.
<7>[90522.576597] (3)[1933:HwBinder:844_5]++++>CSPL: cs35l41_main_amp_event, event
= 8.
<7>[90522.579713] (3)[1933:HwBinder:844_5]speaker_amp 6-0040: 0: Received ACK in
EINT for mbox cmd (1)
<7>[90522.583708] (3)[1933:HwBinder:844_5]----CSPL: cs35l41_main_amp_event.
<7>[90522.584058] (3)[1933:HwBinder:844_5]++++>CSPL: cs35l41_main_amp_event, event
= 8.
<7>[90522.587101] (2)[1933:HwBinder:844_5]speaker_amp 6-0042: 0: Received ACK in
EINT for mbox cmd (1)
<7>[90522.612511] (2)[1933:HwBinder:844_5]----CSPL: cs35l41_main_amp_event.
<6>[90522.613299] (2)[1933:HwBinder:844_5]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_i2s_en_event(), name I2S3_EN, event 0x8
<6>[90522.613397] (2)[1933:HwBinder:844_5]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_i2s_hd_en_event(), name I2S3_HD_EN, event 0x8
<6>[90522.613419] (2)[1933:HwBinder:844_5]mt6885-audio 11210000.mt6885-afe-pcm:
mtk_apll_event(), name APLL2, event 0x8
<6>[90522.613953] (0)[7416:kworker/0:2]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_runtime_suspend()
<6>[90522.613993] (0)[7416:kworker/0:2]mt6885-audio 11210000.mt6885-afe-pcm:
mt6885_afe_disable_clock()
<6>[90522.653375] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90522.717177] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90522.963882] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90522.973262] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:1%, syspll:0%, bus26m:0%
<6>[90522.973384] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15031)
<6>[90522.973409] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90522.973420] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15031)
<6>[90522.973435] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90522.973443] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15031)
<6>[90522.973457] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(34575,34378011,5558), tx=(14197,2617,11580), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90522.973531] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<4>[90523.388223] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 283,
387, 431, 355, 307, 672, 632, 841, success counter cpu: 29, 42, 43, 41, 77, 133,
134, 190, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 54, 69,
65, 57, 120, 204, 168, 220, o: 3-7, p: , f: , t: 90523516000000, 90523516000000,
90523516000000, 90523516000000, 90523516000000, 90523516000000, 90523516000000,
90523868000000,
<5>[90523.630231] (3)[7383:kworker/u16:6][Power/PPM] (0x280)(-1)(0)(0-7)(15)(13)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90523.677456] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90523.969740] (1)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(0)(3)(3) (15)(4)(1)(1)
<6>[90523.976640] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90524.135330] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90524.135429] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90524.135479] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90524.135524] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<6>[90524.567705] (1)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90524.567,L:2040 L:2040 map:2040
<6>[90524.591491] (1)[1367:AALMain]lm36273_brightness_set: bl level = 2032, tmp_bl
= 1926, hbm level = 0
<6>[90524.701625] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90524.981791] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90525.025156] (4)[0:swapper/4][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<5>[90525.152491] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90525.152582] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90525.152635] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90525.152679] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90525.155119] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<4>[90525.276419] -(7)[4901:Binder:1454_12]CPU7: update max cpu_capacity 934
<5>[90525.300334] (2)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(4)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90525.639857] (2)[23427:kworker/2:2]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90524.583,L:2032 L:2032 map:2032 T:90525.639,L:2033
L:2033 map:2033
<6>[90525.725365] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90525.989039] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90526.045246] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 96, r13 = 0xc400fdbc, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem not sleep, subsys not sleep r12 =
0x10000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6163f3, req_sta =
0x15c3d0ff 0x0 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req =
0x1a, clk_settle = 0x60fe,
<6>[90526.045291] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<4>[90526.115505] -(5)[4169:Binder:1454_B]alarmtimer_enqueue: 6 callbacks
suppressed
<5>[90526.115521] -(5)[4169:Binder:1454_B]alarmtimer_enqueue, 218284041000000
<5>[90526.124923] -(4)[4901:Binder:1454_12]alarmtimer_enqueue, 218284041000000
<4>[90526.272628] -(7)[31096:Binder:30164_5]CPU7: update max cpu_capacity 631
<4>[90526.273290] -(6)[3747:PhotonicModulat]CPU6: update max cpu_capacity 864
<5>[90526.426320] -(4)[1893:AlarmManager]alarmtimer_enqueue, 218287262000000
<3>[90526.443941] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90526.449229] (0)[1367:AALMain]lm36273_brightness_set: bl level = 2036, tmp_bl
= 1927, hbm level = 0
<5>[90526.589640] (0)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(6)(1)(1)
<4>[90526.647571] -(6)[1696:Binder:930_4]CPU6: update max cpu_capacity 826
<6>[90526.749131] (0)[8299:displayfeature@][mi_disp:mi_dsi_panel_set_disp_param]
[2022-12-15 05:52:38.201610] [info]panel feature: lcd_hbm, value: 0
<6>[90526.749269] (0)[8299:displayfeature@][mi_disp:mi_dsi_panel_set_disp_param]
[info]DISP_FEATURE_LCD_HBM=0
<6>[90526.749287] (0)[8299:displayfeature@]hbm_brightness_set: HBM_OFF
<6>[90526.749517] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90526.841246] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90526.841393] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90526.992694] (2)[915:HwBinder:896_2]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90525.914,L:2034 L:2034 map:2034 T:90526.189,L:2035
L:2035 map:2035 T:90526.444,L:2036 L:2036 map:2036 T:90526.719,L:2037 L:2037
map:2037 T:90526.992,L:2038 L:2038 map:2038
<6>[90526.999642] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90527.152978] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90527.153035] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(6)(1)(1)
<5>[90527.153059] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<4>[90527.157908] -(5)[8:rcu_preempt]CPU5: update max cpu_capacity 864
<6>[90527.234859] (0)[1888:CachedAppOptimi]stop reclaim: force
<5>[90527.307099] (0)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<6>[90527.352150] (1)[1367:AALMain]lm36273_brightness_set: bl level = 2039, tmp_bl
= 1928, hbm level = 0
<6>[90527.485834] (4)[563:psimon]update_triggers: group:000000007fa854f1
t:00000000cad3e3e9 triggered!
<6>[90527.485914] (2)[559:lmkd]psi_trigger_poll: t:00000000cad3e3e9 triggered!
<36>[90527.513299] (0)[576:logd.auditd]type=1400 audit(1671083558.961:1623317):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<4>[90527.717423] -(7)[4901:Binder:1454_12]CPU7: update max cpu_capacity 934
<5>[90527.724916] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90527.773797] (5)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(6)(3)(3) (15)(10)(1)(1)
<6>[90527.777436] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90528.007935] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90528.029278] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90528.029501] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<4>[90528.389397] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 879,
791, 895, 864, 960, 889, 619, 271, success counter cpu: 109, 126, 126, 110, 98, 45,
36, 22, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 251, 234,
228, 213, 271, 89, 62, 31, o: 0-1,3-7, p: , f: 2, t: 90528516775931,
90528532652086, 90528516000000, 90528522805932, 90528516269530, 90528540000000,
90528575291159, 90528828000000,
<6>[90528.560262] -(7)[1495:Binder:1454_2]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90527.255,L:2039 L:2039 map:2039 T:90527.520,L:2040
L:2040 map:2040 T:90527.787,L:2041 L:2041 map:2041 T:90528.49,L:2042 L:2042
map:2042 T:90528.560,L:2043 L:2043 map:2043
<4>[90528.649340] -(7)[1495:Binder:1454_2]CPU7: update max cpu_capacity 810
<5>[90528.669356] (3)[30078:kworker/3:3]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90528.671467] (3)[30078:kworker/3:3]ghr: scsi_execute exit ret = 0x0
<6>[90528.671539] (3)[30078:kworker/3:3]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90528.671556] (3)[30078:kworker/3:3]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90528.671906] (3)[30078:kworker/3:3]ufshcd bootdevice: rs,ret 0,359 us
<6>[90528.801600] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90529.017402] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90529.130658] (0)[7416:kworker/0:2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90529.130720] (0)[7416:kworker/0:2]ufshcd bootdevice: rr,ret 0,2242 us
<5>[90529.153371] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90529.153468] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90529.320778] (7)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(13)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90529.364995] (3)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(5)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90529.636743] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218326537000000
<5>[90529.640800] -(3)[3653:WifiHandlerThre]alarmtimer_enqueue, 218307266000000
<4>[90529.650885] -(2)[3752:main_thread]asicConnac2xFillCmdTxdInfo: 3 callbacks
suppressed
<5>[90529.656639] -(2)[3662:WifiScanningSer]alarmtimer_enqueue, 218307266000000
<6>[90529.822175] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<3>[90529.879125] (0)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<4>[90529.885855] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90529.885903] -(4)[7032:kworker/4:0]active wake lock :
disp_crtc0_wakelock,last_time:90509712
<4>[90529.885922] -(4)[7032:kworker/4:0]active wake lock : 7-
0008,last_time:90528032
<4>[90529.885945] -(4)[7032:kworker/4:0]active wake lock :
ccmni_md1,last_time:90528586
<4>[90529.885962] -(4)[7032:kworker/4:0]active wake lock :
(null),last_time:90509715
<6>[90530.025424] (2)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90530.033324] -(4)[1495:Binder:1454_2]alarmtimer_enqueue, 218307266000000
<5>[90530.123600] -(4)[4901:Binder:1454_12]alarmtimer_enqueue, 218292750000000
<6>[90530.422071] (3)[1367:AALMain]lm36273_brightness_set: bl level = 2045, tmp_bl
= 1929, hbm level = 0
<5>[90530.558649] (1)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(5)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90530.560064] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90530.560808] (1)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(2)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<4>[90530.568125] -(4)[7402:ndroid.settings]CPU4: update max cpu_capacity 826
<6>[90530.583536] (3)[1367:AALMain]lm36273_brightness_set: bl level = 2027, tmp_bl
= 1926, hbm level = 0
<4>[90530.583865] -(7)[7507:FramePolicy]CPU7: update max cpu_capacity 934
<6>[90530.584845] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90529.367,L:2044 L:2044 map:2044 T:90530.174,L:2045
L:2045 map:2045 T:90530.560,L:2036 L:2036 map:2036 T:90530.568,L:2027 L:2027
map:2027 T:90530.584,L:2017 L:2017 map:2017
<6>[90530.599724] (3)[1367:AALMain]lm36273_brightness_set: bl level = 2017, tmp_bl
= 1924, hbm level = 0
<5>[90530.609321] (2)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(7)(5)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<6>[90530.616607] (3)[1367:AALMain]lm36273_brightness_set: bl level = 2008, tmp_bl
= 1923, hbm level = 0
<4>[90530.617236] -(7)[1901:miui-gesture]CPU7: update max cpu_capacity 784
<5>[90530.622551] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<6>[90530.634107] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1999, tmp_bl
= 1921, hbm level = 0
<5>[90530.638752] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(7)(7)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<6>[90530.649895] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1990, tmp_bl
= 1920, hbm level = 0
<6>[90530.653229] (2)[296:hang_detect][Hang_Detect] hang_detect thread counts down
10:10, status 1.
<6>[90530.666109] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1981, tmp_bl
= 1918, hbm level = 0
<6>[90530.672636] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90530.602,L:2008 L:2008 map:2008 T:90530.619,L:1999
L:1999 map:1999 T:90530.636,L:1990 L:1990 map:1990 T:90530.652,L:1981 L:1981
map:1981 T:90530.672,L:1972 L:1972 map:1972
<6>[90530.682510] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1972, tmp_bl
= 1917, hbm level = 0
<5>[90530.682628] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90530.691896] -(4)[1905:InputDispatcher]CPU4: update max cpu_capacity 826
<6>[90530.699495] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1963, tmp_bl
= 1915, hbm level = 0
<6>[90530.716085] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1955, tmp_bl
= 1914, hbm level = 0
<6>[90530.731207] (2)[30082:kworker/2:1][bq27z561] fg_update_status:
SOC:59,Volt:3894,Cur:702,Temp:353,RM:2224,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90530.731296] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90530.732370] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90530.732642] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1946, tmp_bl
= 1912, hbm level = 0
<6>[90530.732741] (5)[118:pd_dbg_info]///PD dbg info 128d
<5>[90530.732754] (5)[118:pd_dbg_info]<90530.732>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90530.732754] <90530.732>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90530.739017] (2)[23427:kworker/2:2]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90530.750355] (4)[853:[email protected]]healthd: battery l=59 v=3894 t=35.3 h=2
st=3 c=702 fc=4110000 cc=670 chg=
<12>[90530.750377] (4)[853:[email protected]]healthd: battery l=59 v=3894 t=35.3 h=2
st=3 c=702 fc=4110000 cc=670 chg=
<6>[90530.750423] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1937, tmp_bl
= 1911, hbm level = 0
<6>[90530.751541] (2)[853:[email protected]]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90530.685,L:1963 L:1963 map:1963
T:90530.701,L:1955 L:1955 map:1955 T:90530.719,L:1946 L:1946 map:1946
T:90530.734,L:1937 L:1937 map:1937 T:90530.751,L:1929 L:1929 map:1929
<12>[90530.755022] (2)[853:[email protected]]healthd: battery l=59 v=3894 t=35.3 h=2
st=3 c=702 fc=4110000 cc=670 chg=
<12>[90530.760785] (5)[853:[email protected]]healthd: battery l=59 v=3894 t=35.3 h=2
st=3 c=702 fc=4110000 cc=670 chg=
<12>[90530.760804] (5)[853:[email protected]]healthd: battery l=59 v=3894 t=35.3 h=2
st=3 c=702 fc=4110000 cc=670 chg=
<6>[90530.765230] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1929, tmp_bl
= 1909, hbm level = 0
<4>[90530.768877] -(4)[1671:ActivityManager]CPU4: update max cpu_capacity 759
<12>[90530.772280] (0)[853:[email protected]]healthd: battery l=59 v=3894 t=35.3 h=2
st=3 c=702 fc=4110000 cc=670 chg=
<4>[90530.778117] -(4)[7402:ndroid.settings]CPU4: update max cpu_capacity 692
<6>[90530.781856] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1920, tmp_bl
= 1907, hbm level = 0
<6>[90530.798620] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1911, tmp_bl
= 1905, hbm level = 0
<4>[90530.798793] -(5)[1905:InputDispatcher]CPU5: update max cpu_capacity 737
<4>[90530.806357] -(4)[398:ipi_cpu_dvfs_rt]CPU4: update max cpu_capacity 826
<6>[90530.814676] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1903, tmp_bl
= 1904, hbm level = 0
<4>[90530.830625] -(4)[1262:TimerDispatch]CPU4: update max cpu_capacity 806
<6>[90530.831208] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1894, tmp_bl
= 1902, hbm level = 0
<6>[90530.833931] -(6)[398:ipi_cpu_dvfs_rt]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90530.768,L:1920 L:1920 map:1920
T:90530.783,L:1911 L:1911 map:1911 T:90530.801,L:1903 L:1903 map:1903
T:90530.816,L:1894 L:1894 map:1894 T:90530.833,L:1886 L:1886 map:1886
<4>[90530.839170] -(6)[398:ipi_cpu_dvfs_rt]CPU6: update max cpu_capacity 826
<6>[90530.845265] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90530.847604] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1886, tmp_bl
= 1901, hbm level = 0
<4>[90530.864348] -(6)[205:spi0]CPU6: update max cpu_capacity 605
<6>[90530.864683] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1877, tmp_bl
= 1899, hbm level = 0
<4>[90530.865753] -(7)[1034:Binder:930_2]CPU7: update max cpu_capacity 631
<6>[90530.881788] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1869, tmp_bl
= 1898, hbm level = 0
<6>[90530.897637] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1860, tmp_bl
= 1896, hbm level = 0
<6>[90530.913990] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1852, tmp_bl
= 1895, hbm level = 0
<6>[90530.915898] (1)[424:irq/41-NVT-ts-s]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90530.849,L:1877 L:1877 map:1877
T:90530.867,L:1869 L:1869 map:1869 T:90530.883,L:1860 L:1860 map:1860
T:90530.899,L:1852 L:1852 map:1852 T:90530.915,L:1844 L:1844 map:1844
<3>[90530.930199] (1)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<6>[90530.930976] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1844, tmp_bl
= 1893, hbm level = 0
<6>[90530.948219] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1835, tmp_bl
= 1892, hbm level = 0
<6>[90530.964482] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1827, tmp_bl
= 1890, hbm level = 0
<6>[90530.980243] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1819, tmp_bl
= 1889, hbm level = 0
<6>[90530.998033] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1811, tmp_bl
= 1888, hbm level = 0
<6>[90531.000260] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90530.933,L:1835 L:1835 map:1835 T:90530.949,L:1827
L:1827 map:1827 T:90530.967,L:1819 L:1819 map:1819 T:90530.983,L:1811 L:1811
map:1811 T:90531.0,L:1803 L:1803 map:1803
<6>[90531.014309] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1803, tmp_bl
= 1885, hbm level = 0
<6>[90531.029547] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1794, tmp_bl
= 1883, hbm level = 0
<6>[90531.036428] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90531.046270] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1786, tmp_bl
= 1882, hbm level = 0
<4>[90531.057361] -(7)[8258:ndroid.settings]CPU7: update max cpu_capacity 934
<5>[90531.060676] (0)[7539:kworker/u17:0][Power/PPM] Shrink 42 PPM logs from last
502 ms!
<5>[90531.060705] (0)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(13)(3)(3) (15)(14)(1)(1)
<6>[90531.062766] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1778, tmp_bl
= 1880, hbm level = 0
<4>[90531.073503] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 631
<6>[90531.079673] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1770, tmp_bl
= 1879, hbm level = 0
<6>[90531.083829] (2)[30082:kworker/2:1]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90531.15,L:1794 L:1794 map:1794 T:90531.33,L:1786
L:1786 map:1786 T:90531.50,L:1778 L:1778 map:1778 T:90531.67,L:1770 L:1770
map:1770 T:90531.83,L:1762 L:1762 map:1762
<5>[90531.086212] (2)[30082:kworker/2:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90531.092357] (0)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(4)(3)(3) (11)(5)(1)(1)
<4>[90531.094507] -(5)[8258:ndroid.settings]CPU5: update max cpu_capacity 826
<5>[90531.095196] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<6>[90531.095265] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1762, tmp_bl
= 1877, hbm level = 0
<5>[90531.101200] (1)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90531.102759] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(7)(7)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90531.109118] -(5)[1957:presentFence]CPU5: update max cpu_capacity 692
<6>[90531.111228] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1754, tmp_bl
= 1876, hbm level = 0
<4>[90531.125733] -(7)[8258:ndroid.settings]CPU7: update max cpu_capacity 784
<6>[90531.128111] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1747, tmp_bl
= 1875, hbm level = 0
<6>[90531.144982] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1739, tmp_bl
= 1873, hbm level = 0
<5>[90531.153595] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90531.153636] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90531.156584] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90531.160984] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1731, tmp_bl
= 1872, hbm level = 0
<6>[90531.163361] (4)[7402:ndroid.settings]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90531.97,L:1754 L:1754 map:1754
T:90531.113,L:1747 L:1747 map:1747 T:90531.129,L:1739 L:1739 map:1739
T:90531.146,L:1731 L:1731 map:1731 T:90531.163,L:1723 L:1723 map:1723
<6>[90531.165193] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 3, r13 = 0x8400ec90, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24143f3, req_sta = 0x17c3d000
0x180000 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x784a55, wake_misc = 0x1f90010, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req =
0x1a, clk_settle = 0x60fe,
<6>[90531.168319] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90531.177046] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1723, tmp_bl
= 1870, hbm level = 0
<6>[90531.193838] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1715, tmp_bl
= 1869, hbm level = 0
<3>[90531.198282] (1)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90531.199907] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90531.209873] -(4)[1262:TimerDispatch]CPU4: update max cpu_capacity 864
<4>[90531.210284] -(7)[1034:Binder:930_2]CPU7: update max cpu_capacity 953
<6>[90531.210757] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1708, tmp_bl
= 1867, hbm level = 0
<6>[90531.227158] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1700, tmp_bl
= 1866, hbm level = 0
<6>[90531.244237] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1692, tmp_bl
= 1864, hbm level = 0
<6>[90531.245626] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.178,L:1715 L:1715 map:1715 T:90531.196,L:1708
L:1708 map:1708 T:90531.212,L:1700 L:1700 map:1700 T:90531.229,L:1692 L:1692
map:1692 T:90531.245,L:1685 L:1685 map:1685
<6>[90531.260661] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1685, tmp_bl
= 1862, hbm level = 0
<6>[90531.277228] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1677, tmp_bl
= 1860, hbm level = 0
<6>[90531.295701] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1670, tmp_bl
= 1859, hbm level = 0
<6>[90531.309555] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1662, tmp_bl
= 1857, hbm level = 0
<6>[90531.326786] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1655, tmp_bl
= 1856, hbm level = 0
<6>[90531.327338] (0)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.261,L:1677 L:1677 map:1677 T:90531.278,L:1670
L:1670 map:1670 T:90531.294,L:1662 L:1662 map:1662 T:90531.311,L:1655 L:1655
map:1655 T:90531.327,L:1647 L:1647 map:1647
<6>[90531.342426] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1647, tmp_bl
= 1854, hbm level = 0
<6>[90531.359113] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1640, tmp_bl
= 1853, hbm level = 0
<6>[90531.375486] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1632, tmp_bl
= 1851, hbm level = 0
<6>[90531.391910] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1625, tmp_bl
= 1850, hbm level = 0
<6>[90531.408443] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1618, tmp_bl
= 1848, hbm level = 0
<6>[90531.410686] (0)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.343,L:1640 L:1640 map:1640 T:90531.361,L:1632
L:1632 map:1632 T:90531.377,L:1625 L:1625 map:1625 T:90531.393,L:1618 L:1618
map:1618 T:90531.410,L:1611 L:1611 map:1611
<6>[90531.424902] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1611, tmp_bl
= 1847, hbm level = 0
<6>[90531.441987] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1603, tmp_bl
= 1845, hbm level = 0
<5>[90531.446542] (3)[7669:kworker/u17:3][Power/PPM] Shrink 15 PPM logs from last
385 ms!
<5>[90531.446560] (3)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(5)(3)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90531.458108] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1596, tmp_bl
= 1844, hbm level = 0
<5>[90531.464429] (4)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(1)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90531.474928] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1589, tmp_bl
= 1842, hbm level = 0
<5>[90531.482729] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90531.491850] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1582, tmp_bl
= 1841, hbm level = 0
<6>[90531.493511] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.427,L:1603 L:1603 map:1603 T:90531.443,L:1596
L:1596 map:1596 T:90531.460,L:1589 L:1589 map:1589 T:90531.476,L:1582 L:1582
map:1582 T:90531.493,L:1575 L:1575 map:1575
<6>[90531.508249] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1575, tmp_bl
= 1840, hbm level = 0
<6>[90531.524059] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1568, tmp_bl
= 1838, hbm level = 0
<5>[90531.528973] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(4)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90531.540397] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1561, tmp_bl
= 1836, hbm level = 0
<5>[90531.546793] (0)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90531.557053] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1553, tmp_bl
= 1834, hbm level = 0
<6>[90531.573658] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1547, tmp_bl
= 1833, hbm level = 0
<6>[90531.575236] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.509,L:1568 L:1568 map:1568 T:90531.525,L:1561
L:1561 map:1561 T:90531.542,L:1553 L:1553 map:1553 T:90531.558,L:1547 L:1547
map:1547 T:90531.575,L:1540 L:1540 map:1540
<6>[90531.590289] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1540, tmp_bl
= 1831, hbm level = 0
<6>[90531.606471] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1533, tmp_bl
= 1830, hbm level = 0
<6>[90531.623179] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1526, tmp_bl
= 1828, hbm level = 0
<6>[90531.639486] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1519, tmp_bl
= 1827, hbm level = 0
<6>[90531.656015] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1512, tmp_bl
= 1825, hbm level = 0
<6>[90531.657650] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.591,L:1533 L:1533 map:1533 T:90531.607,L:1526
L:1526 map:1526 T:90531.624,L:1519 L:1519 map:1519 T:90531.641,L:1512 L:1512
map:1512 T:90531.657,L:1505 L:1505 map:1505
<6>[90531.672355] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1505, tmp_bl
= 1824, hbm level = 0
<6>[90531.689032] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1498, tmp_bl
= 1822, hbm level = 0
<6>[90531.705934] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1492, tmp_bl
= 1821, hbm level = 0
<6>[90531.722083] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1485, tmp_bl
= 1819, hbm level = 0
<6>[90531.738616] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1478, tmp_bl
= 1818, hbm level = 0
<6>[90531.741879] (2)[901:vendor.xiaomi.h]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90531.674,L:1498 L:1498 map:1498
T:90531.690,L:1492 L:1492 map:1492 T:90531.707,L:1485 L:1485 map:1485
T:90531.723,L:1478 L:1478 map:1478 T:90531.741,L:1472 L:1472 map:1472
<7>[90531.749469] (2)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: effect-
>type=0x51,FF_CONSTANT=0x52,FF_PERIODIC=0x51
<7>[90531.749489] (2)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect:
effect_type is FF_PERIODIC!
<7>[90531.749494] (2)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id =7
<7>[90531.749498] (2)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id=7 , aw8697->activate_mode = 0
<7>[90531.749513] -(2)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=7 ,
activate_mode = 0 val = 1
<7>[90531.749517] -(2)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90531.749606] (5)[7383:kworker/u16:6]aw8697_vibrator_work_routine enter
<6>[90531.749613] (5)[7383:kworker/u16:6]aw8697_vibrator_work_routine: effect_id =
7 state=1 activate_mode = 0 duration = 0
<7>[90531.749921] (1)[7383:kworker/u16:6]aw8697_haptic_stop enter
<7>[90531.750459] (3)[7383:kworker/u16:6]aw8697_haptic_play_mode enter
<7>[90531.751139] (3)[7383:kworker/u16:6]aw8697_haptic_ram_vbat_comp: enter
<7>[90531.751768] (3)[7383:kworker/u16:6]aw8697_haptic_play_mode enter
<7>[90531.752085] (3)[7383:kworker/u16:6]aw8697_haptic_active enter
<7>[90531.753747] (3)[7383:kworker/u16:6]aw8697_haptic_effect_strength enter
<7>[90531.753753] (3)[7383:kworker/u16:6]aw8697_haptic_effect_strength: aw8697-
>play.vmax_mv =0x57ff
<6>[90531.753756] (3)[7383:kworker/u16:6]aw8697_haptic_effect_strength: aw8697-
>level =0x30
<7>[90531.753768] (3)[7383:kworker/u16:6]aw8697_haptic_set_gain: disable
compsensation, vbat=3907, vbat_min=3500, vbat_ref=4150
<7>[90531.753922] (3)[7383:kworker/u16:6]aw8697_haptic_start enter
<6>[90531.754717] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1472, tmp_bl
= 1816, hbm level = 0
<6>[90531.771416] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1465, tmp_bl
= 1815, hbm level = 0
<6>[90531.787954] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1459, tmp_bl
= 1813, hbm level = 0
<6>[90531.804928] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1452, tmp_bl
= 1812, hbm level = 0
<7>[90531.820871] -(2)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=7 ,
activate_mode = 0 val = 0
<7>[90531.820881] -(2)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90531.820912] (2)[901:vendor.xiaomi.h]aw8697_haptics_erase: enter
<7>[90531.820929] (0)[19178:kworker/u16:2]aw8697_vibrator_work_routine enter
<6>[90531.820937] (0)[19178:kworker/u16:2]aw8697_vibrator_work_routine: effect_id
= 7 state=0 activate_mode = 0 duration = 0
<7>[90531.821137] (5)[19178:kworker/u16:2]aw8697_haptic_stop enter
<6>[90531.821617] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1445, tmp_bl
= 1810, hbm level = 0
<7>[90531.821806] (2)[19178:kworker/u16:2]aw8697_haptic_play_mode enter
<6>[90531.823454] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.756,L:1465 L:1465 map:1465 T:90531.774,L:1459
L:1459 map:1459 T:90531.789,L:1452 L:1452 map:1452 T:90531.806,L:1445 L:1445
map:1445 T:90531.823,L:1439 L:1439 map:1439
<6>[90531.837335] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1439, tmp_bl
= 1808, hbm level = 0
<6>[90531.853535] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1432, tmp_bl
= 1806, hbm level = 0
<6>[90531.869957] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1426, tmp_bl
= 1805, hbm level = 0
<6>[90531.873285] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90531.887135] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1420, tmp_bl
= 1803, hbm level = 0
<6>[90531.904230] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1413, tmp_bl
= 1802, hbm level = 0
<6>[90531.904999] (1)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90531.840,L:1432 L:1432 map:1432 T:90531.855,L:1426
L:1426 map:1426 T:90531.872,L:1420 L:1420 map:1420 T:90531.887,L:1413 L:1413
map:1413 T:90531.904,L:1407 L:1407 map:1407
<6>[90531.919897] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1407, tmp_bl
= 1800, hbm level = 0
<6>[90531.936570] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1401, tmp_bl
= 1799, hbm level = 0
<6>[90531.969301] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1388, tmp_bl
= 1796, hbm level = 0
<6>[90531.987512] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1382, tmp_bl
= 1795, hbm level = 0
<6>[90531.989854] (3)[967:mtkPowerMsgHdl]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90531.922,L:1401 L:1401 map:1401 T:90531.937,L:1394
L:1394 map:1394 T:90531.955,L:1388 L:1388 map:1388 T:90531.971,L:1382 L:1382
map:1382 T:90531.989,L:1376 L:1376 map:1376
<5>[90532.000587] (3)[967:mtkPowerMsgHdl][Power/PPM] Shrink 10 PPM logs from last
554 ms!
<5>[90532.000610] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90532.001634] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90532.002245] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (3)(3)(3)(3) (4)(4)(1)(1)
<6>[90532.002491] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1376, tmp_bl
= 1793, hbm level = 0
<5>[90532.006090] (4)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(2)(2)(4)
(4) (3)(3)(3)(3) (4)(4)(1)(1)
<5>[90532.006133] (4)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(5)(3)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<6>[90532.018411] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1369, tmp_bl
= 1791, hbm level = 0
<4>[90532.019397] -(7)[7409:Jit thread pool]CPU7: update max cpu_capacity 784
<6>[90532.034812] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1363, tmp_bl
= 1790, hbm level = 0
<6>[90532.040884] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90532.041848] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<6>[90532.051504] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1357, tmp_bl
= 1789, hbm level = 0
<6>[90532.067846] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1351, tmp_bl
= 1787, hbm level = 0
<6>[90532.069791] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90532.4,L:1369 L:1369 map:1369 T:90532.20,L:1363 L:1363
map:1363 T:90532.36,L:1357 L:1357 map:1357 T:90532.53,L:1351 L:1351 map:1351
T:90532.69,L:1345 L:1345 map:1345
<6>[90532.084490] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1345, tmp_bl
= 1786, hbm level = 0
<6>[90532.100962] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1339, tmp_bl
= 1784, hbm level = 0
<6>[90532.117589] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1333, tmp_bl
= 1783, hbm level = 0
<5>[90532.123894] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<6>[90532.134221] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1327, tmp_bl
= 1781, hbm level = 0
<4>[90532.139452] -(7)[7431:RenderThread]CPU7: update max cpu_capacity 701
<6>[90532.150826] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1321, tmp_bl
= 1779, hbm level = 0
<6>[90532.152818] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90532.85,L:1339 L:1339 map:1339 T:90532.102,L:1333
L:1333 map:1333 T:90532.119,L:1327 L:1327 map:1327 T:90532.136,L:1321 L:1321
map:1321 T:90532.152,L:1315 L:1315 map:1315
<6>[90532.167940] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1315, tmp_bl
= 1777, hbm level = 0
<6>[90532.183733] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1309, tmp_bl
= 1776, hbm level = 0
<6>[90532.200592] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1303, tmp_bl
= 1774, hbm level = 0
<6>[90532.216878] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1297, tmp_bl
= 1773, hbm level = 0
<6>[90532.233188] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1291, tmp_bl
= 1771, hbm level = 0
<6>[90532.235330] (1)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90532.169,L:1309 L:1309 map:1309 T:90532.185,L:1303
L:1303 map:1303 T:90532.202,L:1297 L:1297 map:1297 T:90532.219,L:1291 L:1291
map:1291 T:90532.235,L:1286 L:1286 map:1286
<6>[90532.249709] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1286, tmp_bl
= 1770, hbm level = 0
<6>[90532.266099] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1280, tmp_bl
= 1768, hbm level = 0
<6>[90532.283677] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1274, tmp_bl
= 1767, hbm level = 0
<6>[90532.299227] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1268, tmp_bl
= 1765, hbm level = 0
<5>[90532.304409] (1)[7539:kworker/u17:0][Power/PPM] Shrink 1 PPM logs from last
303 ms!
<5>[90532.304426] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(1)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90532.315688] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1263, tmp_bl
= 1764, hbm level = 0
<6>[90532.317833] (0)[7669:kworker/u17:3]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90532.251,L:1280 L:1280 map:1280 T:90532.267,L:1274
L:1274 map:1274 T:90532.285,L:1268 L:1268 map:1268 T:90532.300,L:1263 L:1263
map:1263 T:90532.317,L:1257 L:1257 map:1257
<5>[90532.321398] (0)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90532.332094] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1257, tmp_bl
= 1762, hbm level = 0
<5>[90532.337142] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(1)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90532.348773] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1251, tmp_bl
= 1761, hbm level = 0
<5>[90532.354241] (0)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<3>[90532.365065] (1)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<6>[90532.366165] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1249, tmp_bl
= 1760, hbm level = 0
<5>[90532.369905] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(5)(3)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<5>[90532.874910] (3)[967:mtkPowerMsgHdl][Power/PPM] Shrink 3 PPM logs from last
570 ms!
<5>[90532.874929] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(7)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<6>[90532.897599] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90532.957914] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90533.046362] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90533.153859] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90533.153947] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<6>[90533.214249] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:3%, syspll:0%, bus26m:0%
<6>[90533.214374] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15038)
<6>[90533.214395] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90533.214406] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15038)
<6>[90533.214420] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90533.214429] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15038)
<6>[90533.214443] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(34693,34410328,5565), tx=(14296,2679,11617), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90533.214526] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<4>[90533.393371] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 763,
735, 686, 785, 730, 846, 636, 525, success counter cpu: 88, 104, 79, 98, 86, 78,
69, 61, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 186, 185,
157, 178, 233, 129, 116, 84, o: 1,3-7, p: , f: 0, t: 90533520000000,
90533520000000, 90533524000000, 90533520000000, 90533520000000, 90533520000000,
90533948000000, 90533884000000,
<5>[90533.633734] (0)[23438:kworker/u16:4][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90533.725829] (1)[0:swapper/1][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<4>[90533.737572] -(7)[1696:Binder:930_4]CPU7: update max cpu_capacity 631
<5>[90533.913699] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(4)(3)(3) (11)(5)(1)(1)
<4>[90533.914890] -(7)[1262:TimerDispatch]CPU7: update max cpu_capacity 934
<5>[90533.916257] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90533.916993] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<6>[90533.917255] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90533.920376] (1)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(2)(2)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<5>[90533.920463] (1)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(7)(7)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90533.931977] -(7)[17225:AnimThread-5]CPU7: update max cpu_capacity 784
<5>[90533.955798] (0)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<3>[90533.985977] (1)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90533.988187] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90534.001790] -(7)[7512:Binder:7402_3]CPU7: update max cpu_capacity 631
<5>[90534.033849] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90534.034056] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2600000
<5>[90534.034130] (2)[1039:mi_thermald][Power/PPM] Invalid input: user/cl=8/2,
min/max freq=-1/3000000
<6>[90534.034785] (1)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 0 to 1 ...
<6>[90534.034809] (1)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] enable with
mode 1
<6>[90534.035641] -(7)[7779:Binder:7402_5]Task-Turbo: task_turbo_feats is change to
15 successfully
<4>[90534.037101] -(7)[7779:Binder:7402_5]CPU7: update max cpu_capacity 934
<6>[90534.053165] (6)[437:wdtk-6][wdk-c]
cpu=6,lbit=0x40,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053160450,15000000]
<6>[90534.053167] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x50,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053164450,14999996]
<6>[90534.053170] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x70,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053167603,14999993]
<6>[90534.053172] (4)[435:wdtk-4][thread:435][RT:90534053170373] 2022-12-15
05:52:45.505692 UTC;android time 2022-12-15 12:52:45.505692
<6>[90534.053177] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x74,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053172757,14999988]
<6>[90534.053181] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0x7c,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053176757,14999984]
<6>[90534.053186] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x7d,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053180757,14999980]
<6>[90534.053188] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xfd,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053185450,14999975]
<6>[90534.053195] (1)[432:wdtk-1][wdk-k]
cpu=1,lbit=0xff,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90534053188142,14999972]
<6>[90534.054382] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<36>[90534.175437] (2)[576:logd.auditd]type=1400 audit(1671083565.625:1623318):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<6>[90534.237208] (3)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90534.237534] -(2)[7669:kworker/u17:3][ccci1/fsm]received MD status response
97690043
<6>[90534.237566] (3)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<6>[90534.288853] (0)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 1 to 0 ...
<6>[90534.288868] (0)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] disable with
mode 0
<6>[90534.289259] (3)[1367:AALMain]Task-Turbo: task_turbo_feats is change to 0
successfully
<6>[90534.387910] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1246, tmp_bl
= 1759, hbm level = 0
<6>[90534.408786] (1)[1656:watchdog]AEEIOCTL_RT_MON_Kick ( 300)
<6>[90534.408800] (1)[1656:watchdog][Hang_Detect] hang_detect enabled 10
<6>[90534.437443] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1242, tmp_bl
= 1758, hbm level = 0
<6>[90534.519593] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1243, tmp_bl
= 1759, hbm level = 0
<6>[90534.569169] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1247, tmp_bl
= 1760, hbm level = 0
<5>[90534.658990] (3)[967:mtkPowerMsgHdl][Power/PPM] Shrink 5 PPM logs from last
745 ms!
<5>[90534.659004] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(0)(3)(3) (15)(5)(1)(1)
<6>[90534.941599] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90535.057653] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90535.142218] -(5)[1893:AlarmManager]alarmtimer_enqueue: 1 callbacks suppressed
<5>[90535.142228] -(5)[1893:AlarmManager]alarmtimer_enqueue, 218307266000000
<3>[90535.146905] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90535.195611] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90532.333,L:1251 L:1251 map:1251 T:90532.350,L:1249
L:1249 map:1249 T:90535.195,L:1250 L:1250 map:1250
<6>[90535.286033] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1251, tmp_bl
= 1761, hbm level = 0
<6>[90535.499735] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1254, tmp_bl
= 1762, hbm level = 0
<6>[90535.576023] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90535.277,L:1251 L:1251 map:1251 T:90535.345,L:1252
L:1252 map:1252 T:90535.427,L:1253 L:1253 map:1253 T:90535.491,L:1254 L:1254
map:1254 T:90535.575,L:1255 L:1255 map:1255
<6>[90535.801914] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1258, tmp_bl
= 1763, hbm level = 0
<5>[90535.879944] (1)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(13)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90535.893835] (1)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(13)(3)(3) (15)(14)(1)(1)
<5>[90535.911337] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(1)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90535.915646] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(1)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90535.916865] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<4>[90535.921178] -(7)[7402:ndroid.settings]CPU7: update max cpu_capacity 784
<5>[90535.932579] (6)[6964:kworker/6:2][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)(4)
(10)(0)(3)(3) (11)(5)(1)(1)
<6>[90535.935892] (2)[30082:kworker/2:1]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90535.638,L:1256 L:1256 map:1256 T:90535.718,L:1257
L:1257 map:1257 T:90535.784,L:1258 L:1258 map:1258 T:90535.870,L:1259 L:1259
map:1259 T:90535.935,L:1260 L:1260 map:1260
<6>[90535.965255] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<3>[90536.010147] (2)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90536.012456] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90536.033182] -(7)[7498:mali-cmar-backe]CPU7: update max cpu_capacity 701
<6>[90536.065545] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<7>[90536.086863] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: effect-
>type=0x51,FF_CONSTANT=0x52,FF_PERIODIC=0x51
<7>[90536.086869] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect:
effect_type is FF_PERIODIC!
<7>[90536.086871] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id =7
<7>[90536.086873] (6)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id=7 , aw8697->activate_mode = 0
<7>[90536.086882] -(6)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=7 ,
activate_mode = 0 val = 1
<7>[90536.086884] -(6)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90536.086913] (4)[25368:kworker/u16:9]aw8697_vibrator_work_routine enter
<6>[90536.086918] (4)[25368:kworker/u16:9]aw8697_vibrator_work_routine: effect_id
= 7 state=1 activate_mode = 0 duration = 0
<7>[90536.087088] (4)[25368:kworker/u16:9]aw8697_haptic_stop enter
<7>[90536.087599] (4)[25368:kworker/u16:9]aw8697_haptic_play_mode enter
<7>[90536.088207] (4)[25368:kworker/u16:9]aw8697_haptic_ram_vbat_comp: enter
<7>[90536.088765] (4)[25368:kworker/u16:9]aw8697_haptic_play_mode enter
<7>[90536.089063] (4)[25368:kworker/u16:9]aw8697_haptic_active enter
<7>[90536.090464] (4)[25368:kworker/u16:9]aw8697_haptic_effect_strength enter
<7>[90536.090468] (4)[25368:kworker/u16:9]aw8697_haptic_effect_strength: aw8697-
>play.vmax_mv =0x57ff
<6>[90536.090470] (4)[25368:kworker/u16:9]aw8697_haptic_effect_strength: aw8697-
>level =0x30
<7>[90536.090479] (4)[25368:kworker/u16:9]aw8697_haptic_set_gain: disable
compsensation, vbat=3907, vbat_min=3500, vbat_ref=4150
<7>[90536.090619] (4)[25368:kworker/u16:9]aw8697_haptic_start enter
<6>[90536.099170] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1262, tmp_bl
= 1764, hbm level = 0
<7>[90536.158096] -(3)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=7 ,
activate_mode = 0 val = 0
<7>[90536.158107] -(3)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90536.158148] (3)[7405:kworker/u16:10]aw8697_vibrator_work_routine enter
<6>[90536.158154] (3)[7405:kworker/u16:10]aw8697_vibrator_work_routine: effect_id
= 7 state=0 activate_mode = 0 duration = 0
<7>[90536.158224] (3)[901:vendor.xiaomi.h]aw8697_haptics_erase: enter
<7>[90536.158351] (3)[7405:kworker/u16:10]aw8697_haptic_stop enter
<7>[90536.158927] (3)[7405:kworker/u16:10]aw8697_haptic_play_mode enter
<6>[90536.285187] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SC_SCP2SPM_WAKEUP_B R12_SYS_TIMER_EVENT_B, timer_out = 1, r13 = 0xc400fdbc,
debug_flag = 0xf8040000 0x40000002, connectivity not sleep, modem not sleep, subsys
not sleep r12 = 0x10800, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta =
0x9b6747f3, req_sta = 0x17c3d0ff 0x0 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0,
isr = 0x0, raw_ext_sta = 0x784255, wake_misc = 0x390020, pcm_flag = 0xc30502 0x0
0xc30102 0xc30102, req = 0x1a, clk_settle = 0x60fe,
<6>[90536.285206] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90536.298503] (0)[7416:kworker/0:2]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90536.1,L:1261 L:1261 map:1261 T:90536.83,L:1262
L:1262 map:1262 T:90536.150,L:1263 L:1263 map:1263 T:90536.215,L:1264 L:1264
map:1264 T:90536.298,L:1265 L:1265 map:1265
<5>[90536.314659] (0)[7416:kworker/0:2][Power/PPM] Shrink 14 PPM logs from last
434 ms!
<5>[90536.314684] (0)[7416:kworker/0:2][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)(4)
(12)(0)(3)(3) (13)(5)(1)(1)
<5>[90536.316046] (3)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<5>[90536.348035] (3)[30078:kworker/3:3][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(0)(3)(3) (13)(5)(1)(1)
<5>[90536.348572] (2)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<6>[90536.379654] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1266, tmp_bl
= 1765, hbm level = 0
<5>[90536.380712] (2)[30082:kworker/2:1][Power/PPM] (0x280)(-1)(0)(0-7)(5)(0)(4)
(4) (12)(0)(3)(3) (13)(5)(1)(1)
<6>[90536.662195] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90536.364,L:1266 L:1266 map:1266 T:90536.446,L:1267
L:1267 map:1267 T:90536.512,L:1268 L:1268 map:1268 T:90536.579,L:1269 L:1269
map:1269 T:90536.662,L:1270 L:1270 map:1270
<6>[90536.674585] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1270, tmp_bl
= 1766, hbm level = 0
<5>[90536.861497] (3)[967:mtkPowerMsgHdl][Power/PPM] Shrink 1 PPM logs from last
546 ms!
<5>[90536.861517] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90536.862029] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90536.862674] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(2)(4)
(4) (2)(2)(3)(3) (5)(5)(1)(1)
<4>[90536.874165] -(4)[7402:ndroid.settings]CPU4: update max cpu_capacity 885
<5>[90536.877522] (1)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90536.906231] -(4)[7402:ndroid.settings]CPU4: update max cpu_capacity 692
<4>[90536.906322] -(7)[7507:FramePolicy]CPU7: update max cpu_capacity 784
<3>[90536.950714] (2)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90536.952172] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(5)(5)(4)
(4) (12)(12)(3)(3) (13)(13)(1)(1)
<5>[90536.952615] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<6>[90536.954905] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1274, tmp_bl
= 1767, hbm level = 0
<5>[90536.974080] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90536.974119] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)
(4) (0)(0)(3)(3) (5)(5)(1)(1)
<5>[90536.974156] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2600000
<5>[90536.974178] (2)[1039:mi_thermald][Power/PPM] Invalid input: user/cl=8/2,
min/max freq=-1/3000000
<6>[90536.974472] (3)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 0 to 1 ...
<6>[90536.974484] (3)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] enable with
mode 1
<6>[90536.974992] -(7)[7414:Binder:7402_1]Task-Turbo: task_turbo_feats is change to
15 successfully
<4>[90536.976605] -(7)[7414:Binder:7402_1]CPU7: update max cpu_capacity 934
<6>[90536.989262] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90537.022032] (1)[915:HwBinder:896_2]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90536.726,L:1271 L:1271 map:1271 T:90536.808,L:1272
L:1272 map:1272 T:90536.874,L:1273 L:1273 map:1273 T:90536.940,L:1274 L:1274
map:1274 T:90537.22,L:1275 L:1275 map:1275
<6>[90537.069273] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90537.099666] -(3)[1494:Binder:1454_1]alarmtimer_enqueue, 218307266000000
<5>[90537.158078] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90537.169676] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1277, tmp_bl
= 1768, hbm level = 0
<6>[90537.173695] (0)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 1 to 0 ...
<6>[90537.173711] (0)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] disable with
mode 0
<6>[90537.174179] (1)[1367:AALMain]Task-Turbo: task_turbo_feats is change to 0
successfully
<6>[90537.186661] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1276, tmp_bl
= 1767, hbm level = 0
<6>[90537.235631] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1272, tmp_bl
= 1766, hbm level = 0
<6>[90537.301522] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1268, tmp_bl
= 1765, hbm level = 0
<6>[90537.368313] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1264, tmp_bl
= 1764, hbm level = 0
<6>[90537.369293] (0)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90537.89,L:1276 L:1276 map:1276 T:90537.155,L:1277
L:1277 map:1277 T:90537.237,L:1278 L:1278 map:1278 T:90537.303,L:1279 L:1279
map:1279 T:90537.369,L:1280 L:1280 map:1280
<6>[90537.418092] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1261, tmp_bl
= 1763, hbm level = 0
<6>[90537.482905] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1257, tmp_bl
= 1762, hbm level = 0
<6>[90537.548882] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1253, tmp_bl
= 1761, hbm level = 0
<5>[90537.598313] (5)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(0)(3)(3) (15)(5)(1)(1)
<6>[90537.615590] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1254, tmp_bl
= 1762, hbm level = 0
<5>[90537.650663] (6)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(13)(3)(3) (15)(14)(1)(1)
<4>[90537.651894] -(7)[930:surfaceflinger]CPU7: update max cpu_capacity 631
<6>[90537.664925] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1258, tmp_bl
= 1763, hbm level = 0
<6>[90537.730736] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1262, tmp_bl
= 1764, hbm level = 0
<6>[90537.732633] (0)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90537.451,L:1281 L:1281 map:1281 T:90537.517,L:1282
L:1282 map:1282 T:90537.582,L:1283 L:1283 map:1283 T:90537.667,L:1284 L:1284
map:1284 T:90537.732,L:1285 L:1285 map:1285
<6>[90537.780190] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1266, tmp_bl
= 1765, hbm level = 0
<6>[90537.814170] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1270, tmp_bl
= 1766, hbm level = 0
<6>[90537.863045] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1274, tmp_bl
= 1767, hbm level = 0
<6>[90537.895807] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1277, tmp_bl
= 1768, hbm level = 0
<6>[90537.945557] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1281, tmp_bl
= 1769, hbm level = 0
<6>[90537.994860] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1286, tmp_bl
= 1770, hbm level = 0
<6>[90538.013298] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90538.028063] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1289, tmp_bl
= 1771, hbm level = 0
<5>[90538.050890] (5)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<5>[90538.052134] (5)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90538.052319] (5)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (2)(2)(3)(3) (5)(5)(1)(1)
<4>[90538.060710] -(4)[1691:PowerManagerSer]CPU4: update max cpu_capacity 885
<5>[90538.064431] (5)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(2)(2)(4)
(4) (2)(2)(3)(3) (5)(5)(1)(1)
<5>[90538.064476] (5)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(7)(7)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<6>[90538.071454] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90538.072615] -(4)[6219:Thread-7]CPU4: update max cpu_capacity 692
<4>[90538.074375] -(7)[27694:kworker/u17:1]CPU7: update max cpu_capacity 784
<6>[90538.095222] (0)[424:irq/41-NVT-ts-s]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90537.799,L:1286 L:1286 map:1286
T:90537.882,L:1287 L:1287 map:1287 T:90537.950,L:1288 L:1288 map:1288
T:90538.14,L:1289 L:1289 map:1289 T:90538.95,L:1290 L:1290 map:1290
<3>[90538.146141] (0)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90538.147069] (5)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(13)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90538.147501] (5)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<4>[90538.157530] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 631
<5>[90538.276454] (4)[7032:kworker/4:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(0)(3)(3) (15)(5)(1)(1)
<36>[90538.277931] (2)[576:logd.auditd]type=1400 audit(1671083569.729:1623319):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<4>[90538.298228] -(5)[398:ipi_cpu_dvfs_rt]CPU5: update max cpu_capacity 917
<6>[90538.323897] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1293, tmp_bl
= 1772, hbm level = 0
<36>[90538.358087] (2)[576:logd.auditd]type=1400 audit(1671083569.809:1623320):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<4>[90538.361283] -(7)[398:ipi_cpu_dvfs_rt]CPU7: update max cpu_capacity 934
<4>[90538.396174] -(2)[0:swapper/2][name:bc&]tick broadcast enter counter cpu: 870,
719, 827, 883, 650, 894, 729, 456, success counter cpu: 131, 70, 78, 100, 89, 116,
68, 30, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 235, 148,
146, 170, 204, 177, 109, 41, o: , p: , f: , t: 90538524000000, 90538524000000,
90538524000000, 90538524000000, 90538523026087, 90538524000000, 90538524000000,
90538524000000,
<5>[90538.400165] (5)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(2)(3)(3) (15)(6)(1)(1)
<5>[90538.406364] (5)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(0)(3)(3) (15)(5)(1)(1)
<4>[90538.415059] -(7)[7539:kworker/u17:0]CPU7: update max cpu_capacity 917
<5>[90538.416383] (7)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(8)(3)(3) (15)(12)(1)(1)
<5>[90538.432762] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(5)(3)(3) (15)(9)(1)(1)
<4>[90538.433607] -(7)[1622:android.anim]CPU7: update max cpu_capacity 753
<4>[90538.440203] -(5)[7431:RenderThread]CPU5: update max cpu_capacity 806
<6>[90538.441432] (6)[7539:kworker/u17:0]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90538.162,L:1291 L:1291 map:1291 T:90538.228,L:1292
L:1292 map:1292 T:90538.310,L:1293 L:1293 map:1293 T:90538.375,L:1294 L:1294
map:1294 T:90538.441,L:1295 L:1295 map:1295
<5>[90538.445243] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(13)(3)(3) (15)(14)(1)(1)
<4>[90538.451581] -(5)[7431:RenderThread]CPU5: update max cpu_capacity 557
<4>[90538.453194] -(7)[8:rcu_preempt]CPU7: update max cpu_capacity 631
<6>[90538.472221] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1291, tmp_bl
= 1771, hbm level = 0
<4>[90538.477786] -(4)[930:surfaceflinger]CPU4: update max cpu_capacity 917
<4>[90538.481319] -(4)[7431:RenderThread]CPU4: update max cpu_capacity 605
<4>[90538.490574] -(7)[7504:AnimRunnerThrea]CPU7: update max cpu_capacity 631
<6>[90538.521747] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1288, tmp_bl
= 1770, hbm level = 0
<36>[90538.525438] (2)[576:logd.auditd]type=1400 audit(1671083569.973:1623321):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<3>[90538.571347] (2)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90538.588572] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1284, tmp_bl
= 1769, hbm level = 0
<5>[90538.610031] -(0)[4169:Binder:1454_B]alarmtimer_enqueue, 218301236000000
<4>[90538.644408] -(7)[7498:mali-cmar-backe]CPU7: update max cpu_capacity 934
<6>[90538.654789] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1280, tmp_bl
= 1768, hbm level = 0
<36>[90538.656655] (2)[576:logd.auditd]type=1400 audit(1671083570.105:1623322):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<5>[90538.713473] (5)[7539:kworker/u17:0][Power/PPM] Shrink 7 PPM logs from last
313 ms!
<5>[90538.713498] (5)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(5)(3)(3) (15)(10)(1)(1)
<4>[90538.721166] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 810
<6>[90538.721881] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1275, tmp_bl
= 1767, hbm level = 0
<5>[90538.729893] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(10)(3)(3) (15)(13)(1)(1)
<5>[90538.737249] (5)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(3)(3)(3) (15)(8)(1)(1)
<4>[90538.738832] -(4)[1691:PowerManagerSer]CPU4: update max cpu_capacity 864
<4>[90538.740927] -(7)[8354:ndroid.settings]CPU7: update max cpu_capacity 879
<5>[90538.747796] (4)[27694:kworker/u17:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(10)(3)(3) (15)(13)(1)(1)
<4>[90538.754914] -(7)[7431:RenderThread]CPU7: update max cpu_capacity 701
<5>[90538.758221] (3)[30078:kworker/3:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(0)(3)(3) (15)(5)(1)(1)
<4>[90538.761218] -(5)[1622:android.anim]CPU5: update max cpu_capacity 917
<6>[90538.770951] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1273, tmp_bl
= 1766, hbm level = 0
<4>[90538.786429] -(5)[1180:mali-mem-purge]CPU5: update max cpu_capacity 759
<6>[90538.812671] -(5)[7498:mali-cmar-backe]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90538.524,L:1296 L:1296 map:1296
T:90538.591,L:1297 L:1297 map:1297 T:90538.659,L:1298 L:1298 map:1298
T:90538.724,L:1299 L:1299 map:1299 T:90538.812,L:1300 L:1300 map:1300
<4>[90538.826548] -(5)[7498:mali-cmar-backe]CPU5: update max cpu_capacity 917
<4>[90538.833762] -(5)[7498:mali-cmar-backe]CPU5: update max cpu_capacity 759
<6>[90538.837270] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1268, tmp_bl
= 1765, hbm level = 0
<4>[90538.853397] -(5)[1033:Binder:930_1]CPU5: update max cpu_capacity 692
<4>[90538.862794] -(5)[27096:kworker/5:3]CPU5: update max cpu_capacity 917
<4>[90538.874244] -(5)[930:surfaceflinger]CPU5: update max cpu_capacity 692
<4>[90538.880578] -(7)[7498:mali-cmar-backe]CPU7: update max cpu_capacity 701
<6>[90538.902928] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1264, tmp_bl
= 1764, hbm level = 0
<4>[90538.945556] -(7)[7498:mali-cmar-backe]CPU7: update max cpu_capacity 934
<6>[90538.968932] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1260, tmp_bl
= 1763, hbm level = 0
<6>[90539.019192] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1257, tmp_bl
= 1762, hbm level = 0
<6>[90539.037440] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90539.074442] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90539.084583] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1252, tmp_bl
= 1761, hbm level = 0
<6>[90539.134033] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1249, tmp_bl
= 1760, hbm level = 0
<4>[90539.140123] -(7)[1620:android.display]CPU7: update max cpu_capacity 631
<5>[90539.140400] (2)[967:mtkPowerMsgHdl][Power/PPM] Shrink 23 PPM logs from last
426 ms!
<5>[90539.140433] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90539.141260] -(4)[7032:kworker/4:0]CPU4: update max cpu_capacity 692
<5>[90539.142443] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90539.143111] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (2)(2)(3)(3) (5)(5)(1)(1)
<4>[90539.149797] -(4)[7402:ndroid.settings]CPU4: update max cpu_capacity 885
<6>[90539.151048] -(7)[7504:AnimRunnerThrea]leds_mtk_disp led_debug_log(140) :
[Light] Set lcd-backlight directlyT:90538.874,L:1301 L:1301 map:1301
T:90538.940,L:1302 L:1302 map:1302 T:90539.7,L:1303 L:1303 map:1303
T:90539.89,L:1304 L:1304 map:1304 T:90539.151,L:1305 L:1305 map:1305
<4>[90539.166728] -(7)[7504:AnimRunnerThrea]CPU7: update max cpu_capacity 934
<36>[90539.166958] (2)[576:logd.auditd]type=1400 audit(1671083570.617:1623323):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<5>[90539.171706] (2)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<4>[90539.182690] -(7)[1034:Binder:930_2]CPU7: update max cpu_capacity 784
<6>[90539.193196] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90539.193265] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90539.199038] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1245, tmp_bl
= 1759, hbm level = 0
<5>[90539.219763] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(7)(3)(4)
(4) (10)(10)(3)(3) (11)(11)(1)(1)
<3>[90539.222000] (0)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90539.223506] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(3)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<5>[90539.224791] (2)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<7>[90539.229775] (0)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: effect-
>type=0x51,FF_CONSTANT=0x52,FF_PERIODIC=0x51
<7>[90539.229792] (0)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect:
effect_type is FF_PERIODIC!
<7>[90539.229799] (0)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id =5
<7>[90539.229807] (0)[901:vendor.xiaomi.h]aw8697_haptics_upload_effect: aw8697-
>effect_id=5 , aw8697->activate_mode = 0
<7>[90539.229836] -(0)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=5 ,
activate_mode = 0 val = 1
<7>[90539.229843] -(0)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90539.229915] (2)[23438:kworker/u16:4]aw8697_vibrator_work_routine enter
<6>[90539.229927] (2)[23438:kworker/u16:4]aw8697_vibrator_work_routine: effect_id
= 5 state=1 activate_mode = 0 duration = 0
<7>[90539.230191] (2)[23438:kworker/u16:4]aw8697_haptic_stop enter
<7>[90539.230916] (2)[23438:kworker/u16:4]aw8697_haptic_play_mode enter
<7>[90539.231751] (2)[23438:kworker/u16:4]aw8697_haptic_ram_vbat_comp: enter
<7>[90539.232640] (2)[23438:kworker/u16:4]aw8697_haptic_play_mode enter
<7>[90539.233079] (2)[23438:kworker/u16:4]aw8697_haptic_active enter
<7>[90539.235235] (1)[23438:kworker/u16:4]aw8697_haptic_effect_strength enter
<7>[90539.235245] (1)[23438:kworker/u16:4]aw8697_haptic_effect_strength: aw8697-
>play.vmax_mv =0x7fff
<6>[90539.235252] (1)[23438:kworker/u16:4]aw8697_haptic_effect_strength: aw8697-
>level =0x80
<7>[90539.235277] (1)[23438:kworker/u16:4]aw8697_haptic_set_gain: disable
compsensation, vbat=3907, vbat_min=3500, vbat_ref=4150
<7>[90539.235456] (1)[23438:kworker/u16:4]aw8697_haptic_start enter
<4>[90539.235997] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 631
<4>[90539.248571] -(6)[478:kworker/6:1H]CPU6: update max cpu_capacity 917
<6>[90539.249587] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1241, tmp_bl
= 1758, hbm level = 0
<6>[90539.298472] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1238, tmp_bl
= 1757, hbm level = 0
<7>[90539.303087] -(0)[901:vendor.xiaomi.h]aw8697_haptics_playback: effect_id=5 ,
activate_mode = 0 val = 0
<7>[90539.303112] -(0)[901:vendor.xiaomi.h]aw8697_haptics_playback: enter ram_mode
<7>[90539.303185] (0)[901:vendor.xiaomi.h]aw8697_haptics_erase: enter
<7>[90539.303291] (1)[23438:kworker/u16:4]aw8697_vibrator_work_routine enter
<6>[90539.303306] (1)[23438:kworker/u16:4]aw8697_vibrator_work_routine: effect_id
= 5 state=0 activate_mode = 0 duration = 0
<7>[90539.303611] (1)[23438:kworker/u16:4]aw8697_haptic_stop enter
<7>[90539.304351] (1)[23438:kworker/u16:4]aw8697_haptic_play_mode enter
<36>[90539.321449] (2)[576:logd.auditd]type=1400 audit(1671083570.769:1623324):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<4>[90539.331815] -(7)[1311:surfaceflinger]CPU7: update max cpu_capacity 934
<36>[90539.387606] (2)[576:logd.auditd]type=1400 audit(1671083570.837:1623325):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<3>[90539.405011] (0)[936:HwBinder:851_2][ION][ion_dbg] alloc_pages order=4
cache=0
<4>[90539.434445] (5)[7402:ndroid.settings]audit: audit_lost=1445408
audit_rate_limit=5 audit_backlog_limit=64
<3>[90539.434470] (5)[7402:ndroid.settings]audit: rate limit exceeded
<5>[90539.451059] (4)[7539:kworker/u17:0][Power/PPM] Shrink 1 PPM logs from last
310 ms!
<5>[90539.451071] (4)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(7)(3)(3) (15)(12)(1)(1)
<4>[90539.454706] -(7)[3516:AsyncTask #3]CPU7: update max cpu_capacity 753
<4>[90539.456353] -(4)[930:surfaceflinger]CPU4: update max cpu_capacity 759
<5>[90539.472590] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(5)(3)(3) (15)(10)(1)(1)
<4>[90539.473407] -(4)[1696:Binder:930_4]CPU4: update max cpu_capacity 806
<5>[90539.484692] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90539.484774] (2)[1039:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2600000
<5>[90539.484826] (2)[1039:mi_thermald][Power/PPM] Invalid input: user/cl=8/2,
min/max freq=-1/3000000
<5>[90539.486277] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)
(4) (0)(0)(3)(3) (5)(5)(1)(1)
<6>[90539.486698] (2)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 0 to 1 ...
<6>[90539.486714] (2)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] enable with
mode 1
<6>[90539.487173] -(6)[6964:kworker/6:2]Task-Turbo: task_turbo_feats is change to
15 successfully
<4>[90539.493417] -(6)[6964:kworker/6:2]CPU6: update max cpu_capacity 917
<4>[90539.493441] -(7)[7512:Binder:7402_3]CPU7: update max cpu_capacity 934
<6>[90539.511042] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1234, tmp_bl
= 1756, hbm level = 0
<6>[90539.560484] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1231, tmp_bl
= 1755, hbm level = 0
<6>[90539.576964] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1232, tmp_bl
= 1756, hbm level = 0
<6>[90539.630595] (2)[967:mtkPowerMsgHdl]cache-ctl: Changing state from 1 to 0 ...
<6>[90539.630611] (2)[967:mtkPowerMsgHdl]cache-ctl: [Change complete] disable with
mode 0
<6>[90539.630674] (0)[1367:AALMain]Task-Turbo: task_turbo_feats is change to 0
successfully
<6>[90539.677401] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1230, tmp_bl
= 1755, hbm level = 0
<6>[90540.061323] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90540.082528] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90540.116657] (2)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(0)(3)(3) (15)(5)(1)(1)
<6>[90540.157327] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1232, tmp_bl
= 1756, hbm level = 0
<6>[90540.206190] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1236, tmp_bl
= 1757, hbm level = 0
<6>[90540.255582] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1239, tmp_bl
= 1758, hbm level = 0
<6>[90540.306436] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1243, tmp_bl
= 1759, hbm level = 0
<6>[90540.387429] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1247, tmp_bl
= 1760, hbm level = 0
<6>[90540.436984] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1251, tmp_bl
= 1761, hbm level = 0
<6>[90540.486629] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1254, tmp_bl
= 1762, hbm level = 0
<6>[90540.536379] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1258, tmp_bl
= 1763, hbm level = 0
<6>[90540.585103] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1262, tmp_bl
= 1764, hbm level = 0
<6>[90540.609361] (2)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90540.609786] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<5>[90540.636178] (1)[23443:kworker/u16:5][Power/PPM] (0x280)(-1)(0)(0-7)(15)(3)
(4)(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90540.893977] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90540.894033] -(4)[7032:kworker/4:0]active wake lock :
disp_crtc0_wakelock,last_time:90509712
<4>[90540.894076] -(4)[7032:kworker/4:0]active wake lock :
ccmni_md1,last_time:90540094
<4>[90540.894095] -(4)[7032:kworker/4:0]active wake lock :
(null),last_time:90509715
<6>[90540.985281] (2)[23427:kworker/2:2][bq27z561] fg_update_status:
SOC:59,Volt:3901,Cur:435,Temp:354,RM:2222,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90540.985449] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90540.986161] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90540.986818] (1)[118:pd_dbg_info]///PD dbg info 128d
<5>[90540.986846] (1)[118:pd_dbg_info]<90540.986>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90540.986846] <90540.986>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90540.994481] (2)[30082:kworker/2:1]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90541.005371] (0)[853:[email protected]]healthd: battery l=59 v=3901 t=35.4 h=2
st=3 c=435 fc=4110000 cc=670 chg=
<12>[90541.005444] (0)[853:[email protected]]healthd: battery l=59 v=3901 t=35.4 h=2
st=3 c=435 fc=4110000 cc=670 chg=
<12>[90541.013028] (0)[853:[email protected]]healthd: battery l=59 v=3901 t=35.4 h=2
st=3 c=435 fc=4110000 cc=670 chg=
<36>[90541.023636] (2)[576:logd.auditd]type=1400 audit(1671083572.473:1623327):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<12>[90541.040752] (1)[853:[email protected]]healthd: battery l=59 v=3901 t=35.4 h=2
st=3 c=435 fc=4110000 cc=670 chg=
<12>[90541.040838] (1)[853:[email protected]]healthd: battery l=59 v=3901 t=35.4 h=2
st=3 c=435 fc=4110000 cc=670 chg=
<12>[90541.048345] (2)[853:[email protected]]healthd: battery l=59 v=3901 t=35.4 h=2
st=3 c=435 fc=4110000 cc=670 chg=
<6>[90541.085458] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90541.085512] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90541.433219] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 142, r13 = 0xc400fdbc, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem not sleep, subsys not sleep r12 =
0x10000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x9b6143f3, req_sta =
0x17c3d0ff 0x180000 0x50000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0,
raw_ext_sta = 0x784a55, wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102
0xc30102, req = 0x1a, clk_settle = 0x60fe,
<6>[90541.433251] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<5>[90541.580631] (2)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(10)(3)(3) (15)(13)(1)(1)
<6>[90541.693262] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90541.693686] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90542.096320] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90542.110166] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<4>[90542.237745] -(7)[6428:android.bg]CPU7: update max cpu_capacity 701
<5>[90542.485292] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
0 min/max freq = -1/2000000
<5>[90542.485412] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90542.485466] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90542.560647] (1)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(13)(3)(3) (15)(14)(1)(1)
<5>[90542.580133] (1)[25366:kworker/1:4][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<4>[90542.585629] -(5)[27096:kworker/5:3]CPU5: update max cpu_capacity 826
<4>[90542.603349] -(7)[1033:Binder:930_1]CPU7: update max cpu_capacity 934
<6>[90542.769432] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90542.769785] (1)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90543.104608] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90543.133751] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90543.155942] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90543.156048] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90543.156101] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90543.156145] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90543.159478] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<5>[90543.198059] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<4>[90543.241378] -(7)[1033:Binder:930_1]CPU7: update max cpu_capacity 953
<4>[90543.397390] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu: 929,
767, 839, 818, 680, 682, 353, 457, success counter cpu: 159, 101, 106, 92, 81, 42,
35, 60, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 317, 246,
210, 154, 215, 68, 58, 75, o: 0,2-7, p: , f: 1, t: 90543524000000, 90543524000000,
90543524000000, 90543524000000, 90543524000000, 90543524000000, 90543535512778,
90543524000000,
<6>[90543.453559] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:4%, syspll:0%, bus26m:0%
<6>[90543.453647] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15042)
<6>[90543.453670] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90543.453682] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15042)
<6>[90543.453696] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90543.453705] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15042)
<6>[90543.453719] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(34731,34421399,5569), tx=(14335,2702,11633), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90543.453799] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<5>[90543.560841] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(10)(3)(3) (15)(13)(1)(1)
<5>[90543.621621] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218307266000000
<3>[90543.637323] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<4>[90543.766085] -(7)[1033:Binder:930_1]CPU7: update max cpu_capacity 701
<6>[90544.113361] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90544.158583] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90544.573962] (3)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(13)(3)(3) (15)(14)(1)(1)
<4>[90544.599831] -(7)[1033:Binder:930_1]CPU7: update max cpu_capacity 631
<5>[90544.701284] (0)[7416:kworker/0:2]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90544.703465] (0)[7416:kworker/0:2]ghr: scsi_execute exit ret = 0x0
<6>[90544.703530] (0)[7416:kworker/0:2]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90544.703550] (0)[7416:kworker/0:2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90544.703935] (0)[7416:kworker/0:2]ufshcd bootdevice: rs,ret 0,397 us
<6>[90545.122006] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90545.140327] (2)[23427:kworker/2:2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90545.140393] (2)[23427:kworker/2:2]ufshcd bootdevice: rr,ret 0,2129 us
<5>[90545.156382] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90545.156481] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<6>[90545.181388] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90545.362849] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218307266000000
<5>[90545.386210] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218307266000000
<5>[90545.401828] -(2)[5449:Binder:1454_1C]alarmtimer_enqueue, 218307266000000
<6>[90546.132052] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90546.205406] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90546.557541] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 63, r13 = 0x8404ec90, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x241c3f3, req_sta = 0x15c3d000
0x18000f 0x50000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x784a55, wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req =
0x1a, clk_settle = 0x60fe,
<6>[90546.557580] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<3>[90547.059422] (1)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<6>[90547.141094] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90547.156851] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90547.156952] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90547.164963] -(0)[5449:Binder:1454_1C]alarmtimer_enqueue, 218307266000000
<6>[90547.229393] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<36>[90547.750684] (1)[576:logd.auditd]type=1400 audit(1671083579.201:1623328):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<6>[90548.054308] (2)[1888:CachedAppOptimi]stop reclaim: force
<6>[90548.149728] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90548.193378] (1)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90548.193660] (3)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90548.253604] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<4>[90548.400443] -(3)[0:swapper/3][name:bc&]tick broadcast enter counter cpu:
1006, 989, 961, 990, 781, 769, 254, 611, success counter cpu: 135, 122, 110, 87,
98, 35, 5, 22, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu:
301, 269, 231, 172, 299, 67, 27, 38, o: 0-2,4-7, p: , f: , t: 90548528000000,
90548532000000, 90548636000000, 90548528000000, 90548538377415, 90548764000000,
90548636000000, 90548690203855,
<5>[90548.549387] -(2)[1893:AlarmManager]alarmtimer_enqueue, 218307266000000
<5>[90548.551998] -(5)[1893:AlarmManager]alarmtimer_enqueue, 218307266000000
<6>[90549.062326] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x20,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549062306331,15000000]
<6>[90549.062365] (5)[436:wdtk-5][thread:436][RT:90549062356178] 2022-12-15
05:53:00.514877 UTC;android time 2022-12-15 12:53:00.514877
<6>[90549.104499] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x30,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549104483947,14957823]
<6>[90549.148090] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x32,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549148051639,14914255]
<6>[90549.153291] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0x36,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549153273716,14909033]
<6>[90549.153415] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xb6,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549153406639,14908900]
<6>[90549.153575] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0xb7,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549153550024,14908757]
<6>[90549.153588] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0xbf,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549153569409,14908737]
<6>[90549.153634] (6)[437:wdtk-6][wdk-k]
cpu=6,lbit=0xff,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90549153621409,14908685]
<5>[90549.157360] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90549.157451] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<6>[90549.158536] (3)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90549.161397] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90549.277543] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90549.341420] (3)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90549.342065] -(2)[7669:kworker/u17:3][ccci1/fsm]received MD status response
976a0043
<6>[90549.342200] (3)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3750
<5>[90549.642955] -(6)[1893:AlarmManager]alarmtimer_enqueue, 218309791000000
<5>[90549.643880] -(5)[3653:WifiHandlerThre]alarmtimer_enqueue, 218309791000000
<5>[90549.649495] -(4)[3662:WifiScanningSer]alarmtimer_enqueue, 218309791000000
<6>[90549.713394] (1)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90549.713730] (6)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90549.822004] (4)[563:psimon]update_triggers: group:000000007fa854f1
t:00000000cad3e3e9 triggered!
<6>[90549.822178] (3)[559:lmkd]psi_trigger_poll: t:00000000cad3e3e9 triggered!
<6>[90550.168688] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90550.301494] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90550.591181] -(2)[3662:WifiScanningSer]alarmtimer_enqueue, 218309791000000
<5>[90550.640492] (1)[23443:kworker/u16:5][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90550.797448] (1)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90550.797784] (2)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90550.850554] (1)[8384:cmd]binder: 8384:8384 ioctl 40046210 7ff8b25514
returned -22
<6>[90550.918625] (0)[8388:cmd]binder: 8388:8388 ioctl 40046210 7ff89f8e04
returned -22
<6>[90550.984209] (0)[8392:cmd]binder: 8392:8392 ioctl 40046210 7fc8b71424
returned -22
<6>[90551.054828] (0)[8396:cmd]binder: 8396:8396 ioctl 40046210 7ff805e114
returned -22
<3>[90551.119816] (0)[613:teei_daemon]ghr: scsi_execute exit ret = 0x0
<3>[90551.120182] (0)[613:teei_daemon]ghr: scsi_execute exit ret = 0x0
<5>[90551.157747] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90551.157823] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90551.157859] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90551.157879] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90551.173457] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<36>[90551.176871] (0)[576:logd.auditd]type=1400 audit(1671083582.625:1623329):
avc: denied { read } for comm="ps" name="pid_max" dev="proc" ino=8853088
scontext=u:r:untrusted_app:s0:c247,c256,c512,c768
tcontext=u:object_r:proc_pid_max:s0 tclass=file permissive=0
app=com.ss.android.ugc.trill
<6>[90551.207763] (2)[30082:kworker/2:1][bq27z561] fg_update_status:
SOC:59,Volt:3906,Cur:475,Temp:355,RM:2221,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90551.207871] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90551.208888] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90551.210621] (1)[118:pd_dbg_info]///PD dbg info 128d
<5>[90551.210657] (1)[118:pd_dbg_info]<90551.209>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90551.210657] <90551.209>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90551.216037] (2)[23427:kworker/2:2]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90551.229431] (3)[853:[email protected]]healthd: battery l=59 v=3906 t=35.5 h=2
st=3 c=475 fc=4110000 cc=670 chg=
<12>[90551.229506] (3)[853:[email protected]]healthd: battery l=59 v=3906 t=35.5 h=2
st=3 c=475 fc=4110000 cc=670 chg=
<12>[90551.234466] (4)[853:[email protected]]healthd: battery l=59 v=3906 t=35.5 h=2
st=3 c=475 fc=4110000 cc=670 chg=
<12>[90551.238118] (7)[853:[email protected]]healthd: battery l=59 v=3906 t=35.5 h=2
st=3 c=475 fc=4110000 cc=670 chg=
<12>[90551.238149] (7)[853:[email protected]]healthd: battery l=59 v=3906 t=35.5 h=2
st=3 c=475 fc=4110000 cc=670 chg=
<12>[90551.244591] (4)[853:[email protected]]healthd: battery l=59 v=3906 t=35.5 h=2
st=3 c=475 fc=4110000 cc=670 chg=
<36>[90551.254848] (1)[576:logd.auditd]type=1400 audit(1671083582.705:1623330):
avc: denied { read } for comm="ps" name="pid_max" dev="proc" ino=8853088
scontext=u:r:untrusted_app:s0:c247,c256,c512,c768
tcontext=u:object_r:proc_pid_max:s0 tclass=file permissive=0
app=com.ss.android.ugc.trill
<36>[90551.266401] (2)[576:logd.auditd]type=1400 audit(1671083582.717:1623331):
avc: denied { read } for comm="Thread-41" name="u:object_r:oem_unlock_prop:s0"
dev="tmpfs" ino=9045 scontext=u:r:untrusted_app:s0:c247,c256,c512,c768
tcontext=u:object_r:oem_unlock_prop:s0 tclass=file permissive=0
app=com.ss.android.ugc.trill
<6>[90551.325278] (1)[8408:cmd]binder: 8408:8408 ioctl 40046210 7ff3227fd4
returned -22
<6>[90551.325477] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90551.645610] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 7, r13 = 0x8400ec90, debug_flag = 0xf8040300
0x40000002, connectivity not sleep, modem sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24143f3, req_sta = 0x17c3d000
0x0 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x784a55,
wake_misc = 0x1f90010, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req = 0x1a,
clk_settle = 0x60fe,
<4>[90551.645647] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90551.645707] -(4)[7032:kworker/4:0]active wake lock :
disp_crtc0_wakelock,last_time:90509712
<4>[90551.645728] -(4)[7032:kworker/4:0]active wake lock : 7-
0008,last_time:90550624
<4>[90551.645756] -(4)[7032:kworker/4:0]active wake lock :
ccmni_md1,last_time:90549467
<4>[90551.645775] -(4)[7032:kworker/4:0]active wake lock :
(null),last_time:90509715
<6>[90551.645854] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<36>[90552.110535] (0)[576:logd.auditd]type=1400 audit(1671083583.561:1623332):
avc: denied { search } for comm="Thread-41" name="input" dev="tmpfs" ino=33
scontext=u:r:untrusted_app:s0:c247,c256,c512,c768
tcontext=u:object_r:input_device:s0 tclass=dir permissive=0
app=com.ss.android.ugc.trill
<5>[90552.169085] -(5)[1893:AlarmManager]alarmtimer_enqueue, 218326537000000
<6>[90552.177536] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90552.179667] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<36>[90552.273550] (0)[576:logd.auditd]type=1400 audit(1671083583.721:1623333):
avc: denied { bind } for comm="ip"
scontext=u:r:untrusted_app:s0:c247,c256,c512,c768
tcontext=u:r:untrusted_app:s0:c247,c256,c512,c768 tclass=netlink_route_socket
permissive=0 bug=b/155595000 app=com.ss.android.ugc.trill
<6>[90552.349391] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90552.429641] -(0)[1494:Binder:1454_1]alarmtimer_enqueue, 218326537000000
<5>[90553.158024] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90553.158078] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90553.158103] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90553.158116] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90553.181816] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90553.373400] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<4>[90553.401744] -(7)[0:swapper/7][name:bc&]tick broadcast enter counter cpu:
1002, 687, 861, 932, 899, 902, 641, 294, success counter cpu: 146, 99, 92, 126,
111, 35, 31, 8, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu:
316, 226, 164, 262, 308, 85, 86, 21, o: 0,2-6, p: , f: , t: 90553528000000,
90553532000000, 90553528000000, 90553528000000, 90553528000000, 90553528000000,
90553528000000, 90553641928317,
<5>[90553.437831] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90553.693179] (1)[7886:Thread-41][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90553.693459] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:6%, syspll:0%, bus26m:0%
<6>[90553.693555] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15043)
<6>[90553.693575] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90553.693586] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15043)
<6>[90553.693601] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90553.693610] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15043)
<6>[90553.693623] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(34752,34422622,5570), tx=(14356,2713,11643), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90553.693703] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90554.186376] (4)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90554.397343] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90554.801273] (2)[30082:kworker/2:1]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90554.803580] (2)[30082:kworker/2:1]ghr: scsi_execute exit ret = 0x0
<6>[90554.803634] (2)[30082:kworker/2:1]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90554.803640] (2)[30082:kworker/2:1]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90554.803847] (2)[30082:kworker/2:1]ufshcd bootdevice: rs,ret 0,207 us
<6>[90554.805245] (3)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90554.805881] (6)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<5>[90555.158268] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90555.158338] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90555.158364] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90555.158379] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90555.162854] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90555.190623] (5)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90555.233431] (6)[6964:kworker/6:2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90555.233480] (6)[6964:kworker/6:2]ufshcd bootdevice: rr,ret 0,1839 us
<6>[90555.421352] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90555.531675] (4)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(3)(3)(3) (11)(4)(1)(1)
<5>[90555.532470] (4)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90555.532675] (4)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (3)(3)(3)(3) (4)(4)(1)(1)
<4>[90555.533310] -(5)[3755:Binder:1454_7]CPU5: update max cpu_capacity 864
<4>[90555.553292] -(7)[7779:Binder:7402_5]CPU7: update max cpu_capacity 953
<3>[90555.609655] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<3>[90555.618536] (1)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90555.620010] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<5>[90555.623038] -(4)[1494:Binder:1454_1]alarmtimer_enqueue, 218326537000000
<36>[90555.638101] (3)[576:logd.auditd]type=1400 audit(1671083587.089:1623334):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<3>[90555.656287] (3)[857:[email protected]][mtk_nanohub]sensor_id id 0,
sensor_type:1
<5>[90555.658246] -(7)[1494:Binder:1454_1]alarmtimer_enqueue, 218318286000000
<5>[90555.732783] (4)[23438:kworker/u16:4][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90556.195127] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90556.445443] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90556.785832] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 7, r13 = 0x8400ec90, debug_flag = 0xf8040300
0x40000002, connectivity not sleep, modem sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x245e3f3, req_sta = 0x15c3d000
0x180000 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x785a55, wake_misc = 0x1f90010, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req =
0x1a, clk_settle = 0x60fe,
<6>[90556.785871] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<5>[90557.158511] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90557.158566] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90557.158590] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90557.158603] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90557.199925] (6)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90557.435240] (1)[8421:cmd]binder: 8421:8421 ioctl 40046210 7fd923e394
returned -22
<36>[90557.444741] (0)[576:logd.auditd]type=1400 audit(1671083588.893:1623335):
avc: denied { search } for comm="Thread-41" name="net" dev="sysfs" ino=27050
scontext=u:r:untrusted_app:s0:c247,c256,c512,c768 tcontext=u:object_r:sysfs_net:s0
tclass=dir permissive=0 app=com.ss.android.ugc.trill
<6>[90557.469463] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90557.789472] (6)[6964:kworker/6:2]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<6>[90557.789540] (7)[0:swapper/7][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<3>[90557.791483] (6)[6964:kworker/6:2]ghr: scsi_execute exit ret = 0x0
<6>[90557.791516] (6)[6964:kworker/6:2]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90557.791526] (6)[6964:kworker/6:2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90557.791740] (6)[6964:kworker/6:2]ufshcd bootdevice: rs,ret 0,221 us
<6>[90558.205711] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90558.402757] -(0)[0:swapper/0][name:bc&]tick broadcast enter counter cpu: 734,
642, 1121, 1033, 898, 934, 645, 396, success counter cpu: 96, 70, 137, 136, 96, 43,
28, 23, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 192, 169,
279, 257, 315, 94, 81, 48, o: 1-7, p: , f: , t: 90558543579549, 90558543221626,
90558602974857, 90558534704934, 9223372036854775807, 90558908000000,
90558652000000, 90558863413164,
<6>[90558.493536] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90559.158827] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90559.158929] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90559.158986] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90559.159028] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90559.215231] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90559.517585] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90559.871547] (0)[7416:kworker/0:2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90559.871622] (0)[7416:kworker/0:2]ufshcd bootdevice: rr,ret 0,1999 us
<6>[90560.121302] (0)[563:psimon]update_triggers: group:000000007fa854f1
t:000000000bb604ab triggered!
<6>[90560.121946] (6)[1675:Thread-2]psi_trigger_poll: t:000000000bb604ab
triggered!
<6>[90560.223580] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90560.541564] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<5>[90560.678926] -(3)[1893:AlarmManager]alarmtimer_enqueue, 218326537000000
<5>[90560.691614] (2)[857:[email protected]][mtk_nanohub]mtk_nanohub_flush [1]
<5>[90560.696850] (1)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[1] flush complete
<5>[90561.159306] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90561.159402] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90561.159451] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90561.159487] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90561.164423] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90561.230224] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90561.373419] (1)[296:hang_detect][Hang_Detect] hang_detect thread counts down
10:10, status 1.
<6>[90561.465275] (2)[23427:kworker/2:2][bq27z561] fg_update_status:
SOC:59,Volt:3911,Cur:395,Temp:356,RM:2220,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90561.465413] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90561.466350] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90561.466971] (0)[118:pd_dbg_info]///PD dbg info 128d
<5>[90561.466998] (0)[118:pd_dbg_info]<90561.466>TCPC-TCPC:bat_update_work_func
battery update soc = 59
<5>[90561.466998] <90561.466>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90561.473597] (2)[30082:kworker/2:1]nchg:capacity:59, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90561.485433] (3)[853:[email protected]]healthd: battery l=59 v=3911 t=35.6 h=2
st=3 c=395 fc=4110000 cc=670 chg=
<12>[90561.485492] (3)[853:[email protected]]healthd: battery l=59 v=3911 t=35.6 h=2
st=3 c=395 fc=4110000 cc=670 chg=
<12>[90561.490158] (3)[853:[email protected]]healthd: battery l=59 v=3911 t=35.6 h=2
st=3 c=395 fc=4110000 cc=670 chg=
<12>[90561.512375] (1)[853:[email protected]]healthd: battery l=59 v=3911 t=35.6 h=2
st=3 c=395 fc=4110000 cc=670 chg=
<12>[90561.512474] (1)[853:[email protected]]healthd: battery l=59 v=3911 t=35.6 h=2
st=3 c=395 fc=4110000 cc=670 chg=
<12>[90561.517285] (5)[853:[email protected]]healthd: battery l=59 v=3911 t=35.6 h=2
st=3 c=395 fc=4110000 cc=670 chg=
<6>[90561.565489] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<36>[90561.807752] (2)[576:logd.auditd]type=1400 audit(1671083593.257:1623336):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<6>[90561.885930] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 89, r13 = 0x8400ec90, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24767f3, req_sta = 0x15c3d000
0x0 0x7c000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785255,
wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req = 0x1a,
clk_settle = 0x60fe,
<4>[90561.885970] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90561.886029] -(4)[7032:kworker/4:0]active wake lock :
disp_crtc0_wakelock,last_time:90509712
<4>[90561.886082] -(4)[7032:kworker/4:0]active wake lock :
(null),last_time:90509715
<6>[90561.886096] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90562.236739] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90562.589481] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90562.658222] -(2)[1494:Binder:1454_1]alarmtimer_enqueue, 218326537000000
<4>[90562.781342] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 934
<5>[90563.160483] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90563.160588] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90563.160645] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90563.160690] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90563.246956] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90563.342908] -(7)[1033:Binder:930_1]CPU7: update max cpu_capacity 953
<4>[90563.403372] -(1)[0:swapper/1][name:bc&]tick broadcast enter counter cpu:
1016, 938, 1084, 884, 831, 835, 373, 244, success counter cpu: 139, 135, 124, 100,
96, 40, 11, 12, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu:
305, 263, 235, 208, 277, 70, 39, 14, o: 2-7, p: , f: , t: 90563531303318,
90563555393011, 90563538067165, 90563542544396, 90563533664384, 90563535650396,
90563655651703, 90563932000000,
<6>[90563.613456] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90563.659039] (3)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(13)(3)(3) (15)(14)(1)(1)
<5>[90563.681194] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<4>[90563.829538] -(7)[21508:FramePolicy]CPU7: update max cpu_capacity 631
<4>[90563.829580] -(4)[930:surfaceflinger]CPU4: update max cpu_capacity 826
<6>[90563.933277] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:7%, syspll:0%, bus26m:0%
<6>[90563.933348] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15048)
<6>[90563.933383] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90563.933400] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15048)
<6>[90563.933429] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90563.933444] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15048)
<6>[90563.933468] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(34768,34423864,5575), tx=(14375,2727,11648), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90563.933558] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<4>[90563.981630] -(4)[1033:Binder:930_1]CPU4: update max cpu_capacity 557
<6>[90564.161252] (0)[431:wdtk-0][wdk-c]
cpu=0,lbit=0x1,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564161223983,15000000]
<6>[90564.161268] (1)[432:wdtk-1][wdk-c]
cpu=1,lbit=0x3,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564161243675,14999980]
<6>[90564.161301] (1)[432:wdtk-1][thread:432][RT:90564161283675] 2022-12-15
05:53:15.613802 UTC;android time 2022-12-15 12:53:15.613802
<6>[90564.161442] (3)[434:wdtk-3][wdk-c]
cpu=3,lbit=0xb,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564161423291,14999800]
<6>[90564.161462] (2)[433:wdtk-2][wdk-c]
cpu=2,lbit=0xf,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564161440291,14999783]
<6>[90564.161927] (4)[435:wdtk-4][wdk-c]
cpu=4,lbit=0x1f,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564161915675,14999308]
<6>[90564.162046] (5)[436:wdtk-5][wdk-c]
cpu=5,lbit=0x3f,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564162035367,14999188]
<6>[90564.162562] (7)[438:wdtk-7][wdk-c]
cpu=7,lbit=0xbf,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564162554444,14998669]
<6>[90564.162774] (6)[437:wdtk-6][wdk-k]
cpu=6,lbit=0xff,cbit=0xff,7,1,2667932697,90509162849698,90509364779160,
[90564162761829,14998462]
<5>[90564.204184] -(0)[1494:Binder:1454_1]alarmtimer_enqueue, 218326537000000
<6>[90564.256539] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90564.412750] (3)[1656:watchdog]AEEIOCTL_RT_MON_Kick ( 300)
<6>[90564.412805] (3)[1656:watchdog][Hang_Detect] hang_detect enabled 10
<6>[90564.445585] (3)[260:ccci_poll1][ccci1/fsm]poll MD status send msg 0
<6>[90564.449717] -(0)[7539:kworker/u17:0][ccci1/fsm]received MD status response
976b0043
<6>[90564.449942] (4)[260:ccci_poll1][ccci1/fsm]poll MD status wait done 3749
<6>[90564.637350] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90564.655517] (2)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90564.662152] -(4)[4451:RenderThread]CPU4: update max cpu_capacity 476
<5>[90564.662341] (2)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<4>[90564.686513] -(5)[27096:kworker/5:3]CPU5: update max cpu_capacity 864
<5>[90565.160938] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90565.161029] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90565.161083] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90565.161127] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90565.265042] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90565.617656] -(5)[1271:app]CPU5: update max cpu_capacity 826
<6>[90565.661490] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90566.273894] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90566.686479] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90567.005245] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 152, r13 = 0x8400ec90, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24343f7, req_sta = 0x17c3d000
0x180000 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta =
0x784255, wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req =
0x1a, clk_settle = 0x60fe,
<6>[90567.005280] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<5>[90567.161497] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90567.161605] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90567.161663] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90567.166279] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90567.284327] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90567.633725] (3)[23443:kworker/u16:5][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90567.709694] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<4>[90567.746453] -(6)[1494:Binder:1454_1]CPU6: update max cpu_capacity 864
<6>[90568.290628] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90568.404057] -(4)[0:swapper/4][name:bc&]tick broadcast enter counter cpu: 958,
894, 853, 889, 866, 924, 409, 178, success counter cpu: 115, 106, 92, 119, 84, 31,
8, 1, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 301, 254,
216, 246, 271, 55, 36, 4, o: 7, p: , f: , t: 90568532000000, 90568532000000,
90568532000000, 90568532000000, 90568545845013, 90568532000000, 90568532000000,
90568924000000,
<5>[90568.701506] (0)[7416:kworker/0:2]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<3>[90568.703581] (0)[7416:kworker/0:2]ghr: scsi_execute exit ret = 0x0
<6>[90568.703720] (0)[7416:kworker/0:2]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90568.703741] (0)[7416:kworker/0:2]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90568.704142] (0)[7416:kworker/0:2]ufshcd bootdevice: rs,ret 0,417 us
<6>[90568.733395] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<36>[90568.834185] (2)[576:logd.auditd]type=1400 audit(1671083600.285:1623337):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<5>[90568.941839] -(7)[1893:AlarmManager]alarmtimer_enqueue, 218326830000000
<6>[90569.136947] (1)[25366:kworker/1:4]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90569.137008] (1)[25366:kworker/1:4]ufshcd bootdevice: rr,ret 0,1969 us
<5>[90569.161895] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90569.161979] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90569.162031] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90569.162073] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90569.217824] -(1)[1893:AlarmManager]alarmtimer_enqueue, 218327268000000
<5>[90569.229763] (3)[857:[email protected]][mtk_nanohub]mtk_nanohub_flush [1]
<5>[90569.232488] (0)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[1] flush complete
<6>[90569.299104] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<5>[90569.643572] -(1)[1893:AlarmManager]alarmtimer_enqueue, 218335630000000
<5>[90569.646684] -(3)[3653:WifiHandlerThre]alarmtimer_enqueue, 218335630000000
<5>[90569.656246] (0)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(4)(3)(3) (11)(5)(1)(1)
<5>[90569.658412] (0)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90569.659269] (0)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<5>[90569.660184] -(2)[3662:WifiScanningSer]alarmtimer_enqueue, 218335630000000
<4>[90569.675505] -(7)[1611:android.ui]CPU7: update max cpu_capacity 934
<6>[90569.735979] (5)[8443:ecovery_proces]binder: 8443:8443 ioctl 40046210
7fcfc60304 returned -22
<3>[90569.737073] (4)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90569.738903] (3)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<6>[90569.760616] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<6>[90569.813882] (3)[1888:CachedAppOptimi]stop reclaim: force
<5>[90569.859319] (7)[23438:kworker/u16:4][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)
(4)(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90570.077081] (0)[7416:kworker/0:2]binder: undelivered transaction 58941103,
process died.
<6>[90570.308809] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90570.785559] (2)[23427:kworker/2:2][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:2><0x5b83>
<5>[90571.162335] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90571.162437] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(5)(1)(1)
<5>[90571.162491] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90571.162534] (3)[1038:mi_thermald][Power/PPM] (0x200)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90571.318800] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90571.700343] (2)[30082:kworker/2:1][bq27z561] fg_update_status:
SOC:58,Volt:3882,Cur:581,Temp:357,RM:2219,FC:4110,FAST:0,ST:2,NAME:bq27z561
<3>[90571.700474] (2)[30082:kworker/2:1][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<3>[90571.701550] (2)[23427:kworker/2:2][USBPD-PM]: usbpd_psy_notifier_cb:
usbpd_psy_notifier_cb enter
<6>[90571.703282] (0)[118:pd_dbg_info]///PD dbg info 128d
<5>[90571.703311] (0)[118:pd_dbg_info]<90571.703>TCPC-TCPC:bat_update_work_func
battery update soc = 58
<5>[90571.703311] <90571.703>TCPC-TCPC:bat_update_work_func Battery Discharging
<6>[90571.708783] (2)[23427:kworker/2:2]nchg:capacity:58, data->night_chg_flag:0,
pre_night_chg_flag:0, input_suspend:0, fcc:12400000
<12>[90571.722504] (3)[853:[email protected]]healthd: battery l=58 v=3882 t=35.7 h=2
st=3 c=581 fc=4110000 cc=670 chg=
<12>[90571.722559] (3)[853:[email protected]]healthd: battery l=58 v=3882 t=35.7 h=2
st=3 c=581 fc=4110000 cc=670 chg=
<12>[90571.731129] (0)[853:[email protected]]healthd: battery l=58 v=3882 t=35.7 h=2
st=3 c=581 fc=4110000 cc=670 chg=
<12>[90571.765872] (2)[853:[email protected]]healthd: battery l=58 v=3882 t=35.7 h=2
st=3 c=581 fc=4110000 cc=670 chg=
<12>[90571.765962] (2)[853:[email protected]]healthd: battery l=58 v=3882 t=35.7 h=2
st=3 c=581 fc=4110000 cc=670 chg=
<12>[90571.774387] (2)[853:[email protected]]healthd: battery l=58 v=3909 t=35.7 h=2
st=3 c=336 fc=4110000 cc=670 chg=
<6>[90571.805322] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90571.860104] (6)[8472:roid.apps.turb]binder: 8472:8472 ioctl 40046210
7fcfc60304 returned -22
<6>[90572.153846] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 197, r13 = 0x8400ec90, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem sleep, subsys not sleep r12 = 0x10000,
r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x24367f3, req_sta = 0x15c3d000
0x0 0x50000011 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0, raw_ext_sta = 0x785a55,
wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102 0xc30102, req = 0x1a,
clk_settle = 0x60fe,
<6>[90572.153888] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90572.327719] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90572.749320] -(7)[4028:ndroid.systemui]CPU7: update max cpu_capacity 953
<5>[90572.769773] (0)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(1)(4)
(4) (15)(14)(3)(3) (15)(14)(1)(1)
<4>[90572.780965] -(4)[1494:Binder:1454_1]alarmtimer_enqueue: 20 callbacks
suppressed
<5>[90572.780977] -(4)[1494:Binder:1454_1]alarmtimer_enqueue, 218347273000000
<4>[90572.825920] -(7)[1271:app]CPU7: update max cpu_capacity 631
<4>[90572.826247] -(4)[8758:Binder:1454_1E]CPU4: update max cpu_capacity 826
<5>[90572.827883] -(1)[4169:Binder:1454_B]alarmtimer_enqueue, 218335455000000
<6>[90572.829383] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<4>[90572.893916] (4)[7032:kworker/4:0]power_debug_work: start
<4>[90572.893973] -(4)[7032:kworker/4:0]active wake lock :
disp_crtc0_wakelock,last_time:90509712
<4>[90572.894013] -(4)[7032:kworker/4:0]active wake lock : ttyC0,last_time:90572963
<4>[90572.894023] -(4)[7032:kworker/4:0]active wake lock :
ccmni_md1,last_time:90572446
<4>[90572.894042] -(4)[7032:kworker/4:0]active wake lock :
(null),last_time:90509715
<5>[90573.162791] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90573.162905] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90573.168133] (3)[1016:mi_thermald][Thermal/TC/TA][wakeup_ta_algo] status:
0x1000
<6>[90573.337003] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<4>[90573.410854] -(4)[0:swapper/4][name:bc&]tick broadcast enter counter cpu: 776,
892, 858, 874, 728, 714, 373, 214, success counter cpu: 97, 140, 101, 95, 72, 39,
19, 11, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 234, 294,
230, 205, 260, 77, 44, 15, o: 0-3,5-7, p: , f: 4, t: 90573545165472,
90573603318243, 90573549847473, 90573558668243, 90573536720122, 90573556000000,
90573788000000, 90573948000000,
<5>[90573.783093] (2)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90573.853433] (1)[25366:kworker/1:4]sd 0:0:0:2: [sdc] Synchronizing SCSI cache
<6>[90573.853587] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<3>[90573.855648] (1)[25366:kworker/1:4]ghr: scsi_execute exit ret = 0x0
<6>[90573.855723] (1)[25366:kworker/1:4]ufshpb_suspend:3300 info: ufshpb_lu 2 goto
suspend
<6>[90573.855743] (1)[25366:kworker/1:4]ufshpb_suspend:3301 info: ufshpb_lu 2
changes suspend state
<6>[90573.856170] (1)[25366:kworker/1:4]ufshcd bootdevice: rs,ret 0,437 us
<4>[90573.920641] -(7)[8758:Binder:1454_1E]CPU7: update max cpu_capacity 934
<5>[90573.921212] (5)[0:swapper/5][ccci0/dpmaif][dpmaif_traffic_monitor_func]
g_dp_uid_mask_count = 0
<6>[90574.174021] (4)[0:swapper/4][name:spm&][RC] ratio, duration_ms:10240,
dram:15%, syspll:0%, bus26m:0%
<6>[90574.174125] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15051)
<6>[90574.174147] (4)[7032:kworker/4:0][ccci1/net]ccmni0(1,1), irat_MD1,
rx=(95006,99531099,9282), tx=(36931,18574,18364), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90574.174157] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15051)
<6>[90574.174172] (4)[7032:kworker/4:0][ccci1/net]ccmni1(0,0), irat_MD1,
rx=(2037,711677,191), tx=(1991,0,0), txq_len=(0,0), tx_drop=(0,0,0), rx_drop=(0,0),
tx_busy=(0,0), sta=(0x2,0x80,0x1,0x1)
<6>[90574.174181] (4)[7032:kworker/4:0][ccci1/net]to:clr(79:15051)
<6>[90574.174194] (4)[7032:kworker/4:0][ccci1/net]ccmni2(1,1), irat_MD1,
rx=(34815,34430538,5578), tx=(14428,2756,11672), txq_len=(0,0), tx_drop=(0,0,0),
rx_drop=(0,0), tx_busy=(0,0), sta=(0x3,0x81,0x0,0x0)
<6>[90574.174305] (4)[7032:kworker/4:0][ccci1/CCB]CCB active bitmap:0x0
<6>[90574.345822] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90574.877449] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<36>[90575.037029] (2)[576:logd.auditd]type=1400 audit(1671083606.485:1623338):
avc: denied { search } for comm="surfaceflinger" name="mcd" dev="dm-13" ino=340
scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:mcd_data_file:s0 tclass=dir
permissive=0
<5>[90575.152168] (1)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(7)(0)(4)
(4) (10)(4)(3)(3) (11)(5)(1)(1)
<5>[90575.154436] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 0, user_sta: 0
<5>[90575.155077] (1)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)
(4) (4)(4)(3)(3) (5)(5)(1)(1)
<5>[90575.163019] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/2200000
<5>[90575.163042] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)(4)
(3)(3)(3)(3) (5)(5)(1)(1)
<5>[90575.163060] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2127000
<5>[90575.163073] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(2)(0)(4)(4)
(3)(3)(3)(3) (4)(4)(1)(1)
<4>[90575.192363] -(7)[7512:Binder:7402_3]CPU7: update max cpu_capacity 953
<3>[90575.195431] (0)[424:irq/41-NVT-ts-s][NVT-ts-spi] nvt_ts_work_func 1561:
finger leave
<5>[90575.198029] (1)[967:mtkPowerMsgHdl][SWPM] pmu_enable: 1, user_sta: 1
<5>[90575.202439] (5)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(0)(0)(4)
(4) (3)(3)(3)(3) (4)(4)(1)(1)
<6>[90575.270352] (6)[6964:kworker/6:2]ufshpb_resume:3326 info: ufshpb_lu 2
resume. do_task_work 0 retry 0
<6>[90575.270366] (6)[6964:kworker/6:2]ufshcd bootdevice: rr,ret 0,1665 us
<3>[90575.273418] (1)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<36>[90575.296954] (2)[576:logd.auditd]type=1400 audit(1671083606.745:1623339):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<6>[90575.299671] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1305, tmp_bl
= 1775, hbm level = 0
<3>[90575.311253] (3)[23443:kworker/u16:5]ghr: scsi_execute exit ret = 0x0
<36>[90575.340062] (2)[576:logd.auditd]type=1400 audit(1671083606.789:1623340):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<6>[90575.355559] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<36>[90575.375850] (2)[576:logd.auditd]type=1400 audit(1671083606.825:1623341):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<14>[90575.394064] (4)[1:init]init: starting service 'setup-bcb'...
<14>[90575.394327] (4)[1:init]init: Created socket '/dev/socket/uncrypt', mode
660, user 1000, group 1000
<14>[90575.398414] (3)[1:init]init: Control message: Processed ctl.start for
'setup-bcb' from pid: 1454 (system_server)
<36>[90575.482144] (2)[576:logd.auditd]type=1400 audit(1671083606.933:1623342):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<36>[90575.614578] (2)[576:logd.auditd]type=1400 audit(1671083607.065:1623343):
avc: denied { read } for comm="ndroid.settings" name="u:object_r:qemu_hw_prop:s0"
dev="tmpfs" ino=9060 scontext=u:r:system_app:s0 tcontext=u:object_r:qemu_hw_prop:s0
tclass=file permissive=0
<5>[90575.819736] (3)[967:mtkPowerMsgHdl][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<6>[90575.905580] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90576.358762] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<3>[90576.408960] (2)[23438:kworker/u16:4]ghr: scsi_execute exit ret = 0x0
<14>[90576.414812] (3)[1:init]init: Service 'setup-bcb' (pid 8505) exited with
status 0 oneshot service took 1.019000 seconds in background
<14>[90576.414895] (3)[1:init]init: Sending signal 9 to service 'setup-bcb' (pid
8505) process group...
<14>[90576.415239] (3)[1:init]libprocessgroup: Successfully killed process cgroup
uid 0 pid 8505 in 0ms
<5>[90576.647876] (3)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(8)(1)(1)
<5>[90576.650408] (7)[7669:kworker/u17:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(8)(3)(3) (15)(12)(1)(1)
<4>[90576.672398] -(7)[31866:kworker/7:0]CPU7: update max cpu_capacity 753
<6>[90576.675909] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1304, tmp_bl
= 1774, hbm level = 0
<5>[90576.707890] (2)[30082:kworker/2:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<5>[90576.713287] (2)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(8)(3)(3) (15)(12)(1)(1)
<6>[90576.725795] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1300, tmp_bl
= 1773, hbm level = 0
<6>[90576.733171] (0)[0:swapper/0][mtk_net][rtnl_lock]There is no process hold
rtnl lock
<6>[90576.774242] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1296, tmp_bl
= 1772, hbm level = 0
<5>[90576.809847] (2)[30082:kworker/2:1][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(3)(3)(3) (15)(4)(1)(1)
<4>[90576.814947] -(5)[505:kworker/5:1H]CPU5: update max cpu_capacity 864
<6>[90576.824163] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1292, tmp_bl
= 1771, hbm level = 0
<4>[90576.872774] -(7)[1033:Binder:930_1]CPU7: update max cpu_capacity 953
<6>[90576.889932] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1287, tmp_bl
= 1770, hbm level = 0
<6>[90576.925447] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90576.940169] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1284, tmp_bl
= 1769, hbm level = 0
<6>[90576.988945] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1280, tmp_bl
= 1768, hbm level = 0
<6>[90577.038584] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1276, tmp_bl
= 1767, hbm level = 0
<6>[90577.070961] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1273, tmp_bl
= 1766, hbm level = 0
<6>[90577.138233] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1268, tmp_bl
= 1765, hbm level = 0
<5>[90577.163265] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
1 min/max freq = -1/1985000
<5>[90577.163345] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(4)(1)(1)
<5>[90577.163394] (3)[1038:mi_thermald][Power/PPM] sys boost by XM_THERM: cluster
2 min/max freq = -1/2032000
<5>[90577.163431] (3)[1038:mi_thermald][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<6>[90577.187209] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1264, tmp_bl
= 1764, hbm level = 0
<4>[90577.204301] -(7)[4169:Binder:1454_B]CPU7: update max cpu_capacity 934
<6>[90577.235825] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1261, tmp_bl
= 1763, hbm level = 0
<6>[90577.245218] (4)[7032:kworker/4:0][name:spm&][SPM] MCUSYSOFF wake up by
R12_SYS_TIMER_EVENT_B, timer_out = 87, r13 = 0xc404edb4, debug_flag = 0xf8040000
0x40000002, connectivity not sleep, modem not sleep, subsys not sleep r12 =
0x10000, r12_ext = 0x0, raw_sta = 0x0 0x0 0x0, idle_sta = 0x1a61e3f3, req_sta =
0x15c3d0d3 0x18000f 0x7c000017 0x1f0fff 0x0, cg_check_sta =0x0, isr = 0x0,
raw_ext_sta = 0x785255, wake_misc = 0x390000, pcm_flag = 0xc30502 0x0 0xc30102
0xc30102, req = 0x1a, clk_settle = 0x60fe,
<6>[90577.245274] (4)[7032:kworker/4:0]usb_state<DISCONNECTED>
<6>[90577.285858] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1257, tmp_bl
= 1762, hbm level = 0
<6>[90577.337261] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1253, tmp_bl
= 1761, hbm level = 0
<6>[90577.368250] (0)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90577.369726] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1250, tmp_bl
= 1760, hbm level = 0
<6>[90577.434346] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1245, tmp_bl
= 1759, hbm level = 0
<6>[90577.484509] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1241, tmp_bl
= 1758, hbm level = 0
<6>[90577.533221] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1238, tmp_bl
= 1757, hbm level = 0
<6>[90577.582658] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1234, tmp_bl
= 1756, hbm level = 0
<6>[90577.616172] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1231, tmp_bl
= 1755, hbm level = 0
<6>[90577.668031] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1227, tmp_bl
= 1754, hbm level = 0
<5>[90577.671567] (4)[3690:SecurityWriteHa]rtc_mt6358: set al time = 1970/01/01
00:00:00 (4)
<3>[90577.671590] -(4)[3690:SecurityWriteHa]rtc_mt6358:
mtk_rtc_set_pwron_alarm_time
<5>[90577.672604] -(7)[8758:Binder:1454_1E]alarmtimer_enqueue, 218335455000000
<5>[90577.672737] -(7)[8758:Binder:1454_1E]alarmtimer_enqueue, 218335455000000
<6>[90577.731296] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1222, tmp_bl
= 1753, hbm level = 0
<6>[90577.764640] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1220, tmp_bl
= 1752, hbm level = 0
<5>[90577.784248] (2)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(10)(3)(3) (15)(13)(1)(1)
<5>[90577.802543] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(12)(3)(3) (15)(13)(1)(1)
<6>[90577.817665] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1216, tmp_bl
= 1751, hbm level = 0
<5>[90577.819758] (5)[27096:kworker/5:3][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(4)(3)(3) (15)(5)(1)(1)
<5>[90577.830423] -(7)[1893:AlarmManager]alarmtimer_enqueue, 218347273000000
<5>[90577.836220] (1)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(12)(3)(3) (15)(13)(1)(1)
<5>[90577.841541] (6)[7539:kworker/u17:0][Power/PPM] (0x280)(-1)(0)(0-7)(15)(0)(4)
(4) (15)(10)(3)(3) (15)(13)(1)(1)
<5>[90577.841652] (0)[857:[email protected]][mtk_nanohub]mtk_nanohub_flush [1]
<5>[90577.843438] (2)[249:chre_kthread][mtk_nanohub]mtk_nanohub_report_to_manager
[1] flush complete
<6>[90577.862472] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1212, tmp_bl
= 1750, hbm level = 0
<4>[90577.866980] -(7)[8507:Thread-9680]CPU7: update max cpu_capacity 701
<6>[90577.912143] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1208, tmp_bl
= 1749, hbm level = 0
<4>[90577.929665] -(7)[1900:RenderThread]CPU7: update max cpu_capacity 631
<36>[90577.942562] (3)[576:logd.auditd]type=1400 audit(1671083609.389:1623344):
avc: denied { read } for comm="Binder:636_3" name="wakeup38" dev="sysfs" ino=53173
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90577.942801] (3)[576:logd.auditd]type=1400 audit(1671083609.393:1623345):
avc: denied { read } for comm="Binder:636_3" name="wakeup28" dev="sysfs" ino=49384
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90577.942902] (3)[576:logd.auditd]type=1400 audit(1671083609.393:1623346):
avc: denied { read } for comm="Binder:636_3" name="wakeup18" dev="sysfs" ino=45075
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<36>[90577.942984] (3)[576:logd.auditd]type=1400 audit(1671083609.393:1623347):
avc: denied { read } for comm="Binder:636_3" name="wakeup26" dev="sysfs" ino=49169
scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
<4>[90577.944103] (7)[7478:Binder:636_3]audit: audit_lost=1445409
audit_rate_limit=5 audit_backlog_limit=64
<3>[90577.944115] (7)[7478:Binder:636_3]audit: rate limit exceeded
<6>[90577.949328] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90577.961391] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1205, tmp_bl
= 1748, hbm level = 0
<6>[90577.977827] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1203, tmp_bl
= 1747, hbm level = 0
<6>[90578.011195] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1201, tmp_bl
= 1746, hbm level = 0
<4>[90578.035166] -(4)[4001:m.android.phone]CPU4: update max cpu_capacity 826
<6>[90578.039095] (3)[1597:RfxSender_4][ccci1/net]ccmni2_Close:cnt=(0, 0)
<6>[90578.045922] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1198, tmp_bl
= 1745, hbm level = 0
<4>[90578.072002] -(4)[7331:CombinedTP353]CPU4: update max cpu_capacity 557
<4>[90578.073184] (7)[4874:Binder:1454_F]CPU7: update max cpu_capacity 631
<5>[90578.078512] -(7)[3841:Binder:1454_9]alarmtimer_enqueue, 218347273000000
<5>[90578.079505] -(7)[3676:Binder:1454_5]alarmtimer_enqueue, 218347273000000
<6>[90578.086484] -(5)[3756:Binder:1454_8]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90578.86,L:1306 L:1306 map:1306
<4>[90578.093224] -(5)[3756:Binder:1454_8]CPU5: update max cpu_capacity 826
<6>[90578.102365] (2)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 open with flag
20802 by RfxSender_8
<6>[90578.102388] (2)[1604:RfxSender_8][ccci1/fsm]EFUN set to 2
<6>[90578.102424] (2)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 close by
RfxSender_8 rx_len=0 empty=1, clear_cnt=0, drop=0 usagecnt=0
<6>[90578.102440] (2)[1604:RfxSender_8][ccci1/pot]critical user check: 0x7
<4>[90578.107751] -(7)[8534:CombinedTP357]CPU7: update max cpu_capacity 934
<6>[90578.125731] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1194, tmp_bl
= 1744, hbm level = 0
<6>[90578.176833] (0)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.93,L:1307 L:1307 map:1307 T:90578.110,L:1308
L:1308 map:1308 T:90578.143,L:1309 L:1309 map:1309 T:90578.160,L:1310 L:1310
map:1310 T:90578.176,L:1311 L:1311 map:1311
<6>[90578.224735] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1190, tmp_bl
= 1743, hbm level = 0
<6>[90578.277924] (1)[1888:CachedAppOptimi]stop reclaim: force
<6>[90578.294075] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.210,L:1312 L:1312 map:1312 T:90578.227,L:1313
L:1313 map:1313 T:90578.243,L:1314 L:1314 map:1314 T:90578.260,L:1315 L:1315
map:1315 T:90578.294,L:1316 L:1316 map:1316
<6>[90578.325288] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1187, tmp_bl
= 1742, hbm level = 0
<6>[90578.379754] (1)[915:HwBinder:896_2]testing-mode odm:testing-mode: GPIO [0]
status: 0
<6>[90578.393932] -(6)[0:swapper/6]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.311,L:1317 L:1317 map:1317 T:90578.330,L:1318
L:1318 map:1318 T:90578.344,L:1319 L:1319 map:1319 T:90578.378,L:1320 L:1320
map:1320 T:90578.393,L:1321 L:1321 map:1321
<4>[90578.411175] -(6)[0:swapper/6][name:bc&]tick broadcast enter counter cpu: 597,
586, 527, 616, 637, 631, 336, 503, success counter cpu: 76, 46, 57, 60, 81, 51, 14,
34, fail counter cpu: 0, 0, 0, 0, 0, 0, 0, 0, interrupt counter cpu: 203, 118, 155,
146, 211, 98, 42, 53, o: 4,7, p: , f: , t: 90578539244089, 90578540000000,
90578540000000, 90578540000000, 90578540000000, 90578540000000, 90578556000000,
90578546841883,
<6>[90578.458166] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1182, tmp_bl
= 1741, hbm level = 0
<6>[90578.493896] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.410,L:1322 L:1322 map:1322 T:90578.427,L:1323
L:1323 map:1323 T:90578.461,L:1324 L:1324 map:1324 T:90578.477,L:1325 L:1325
map:1325 T:90578.493,L:1326 L:1326 map:1326
<6>[90578.539956] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1179, tmp_bl
= 1740, hbm level = 0
<6>[90578.594620] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.510,L:1327 L:1327 map:1327 T:90578.542,L:1328
L:1328 map:1328 T:90578.562,L:1329 L:1329 map:1329 T:90578.576,L:1330 L:1330
map:1330 T:90578.594,L:1331 L:1331 map:1331
<6>[90578.622026] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1176, tmp_bl
= 1739, hbm level = 0
<6>[90578.708370] (2)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.625,L:1332 L:1332 map:1332 T:90578.642,L:1333
L:1333 map:1333 T:90578.658,L:1334 L:1334 map:1334 T:90578.676,L:1335 L:1335
map:1335 T:90578.708,L:1336 L:1336 map:1336
<6>[90578.752971] (2)[1367:AALMain]lm36273_brightness_set: bl level = 1172, tmp_bl
= 1738, hbm level = 0
<6>[90578.772935] (4)[1597:RfxSender_4][ccci1/net]ccmni0_Close:cnt=(0, 0)
<6>[90578.805244] (0)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.725,L:1337 L:1337 map:1337 T:90578.740,L:1338
L:1338 map:1338 T:90578.757,L:1339 L:1339 map:1339 T:90578.776,L:1340 L:1340
map:1340 T:90578.805,L:1341 L:1341 map:1341
<6>[90578.837685] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1169, tmp_bl
= 1737, hbm level = 0
<6>[90578.859247] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1170, tmp_bl
= 1738, hbm level = 0
<6>[90578.870649] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1168, tmp_bl
= 1737, hbm level = 0
<6>[90578.902091] (1)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.823,L:1342 L:1342 map:1342 T:90578.837,L:1343
L:1343 map:1343 T:90578.853,L:1344 L:1344 map:1344 T:90578.886,L:1345 L:1345
map:1345 T:90578.902,L:1346 L:1346 map:1346
<6>[90578.951554] (1)[1367:AALMain]lm36273_brightness_set: bl level = 1165, tmp_bl
= 1736, hbm level = 0
<6>[90578.977260] (2)[30082:kworker/2:1][msdc]msdc1 -> Card insert<0> Block bad
card<1>, mrq< (null)> claimed<1> pwrcnt<0> trigger card event<0> <-
msdc_ops_get_cd() : L<4483> PID<kworker/2:1><0x7582>
<6>[90579.000785] (3)[1367:AALMain]leds_mtk_disp led_debug_log(140) :[Light] Set
lcd-backlight directlyT:90578.918,L:1347 L:1347 map:1347 T:90578.935,L:1348
L:1348 map:1348 T:90578.969,L:1349 L:1349 map:1349 T:90578.985,L:1350 L:1350
map:1350 T:90579.0,L:1351 L:1351 map:1351
<6>[90579.016455] (3)[1367:AALMain]lm36273_brightness_set: bl level = 1162, tmp_bl
= 1735, hbm level = 0
<6>[90579.021269] (4)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 open with flag
20802 by RfxSender_8
<6>[90579.021281] (4)[1604:RfxSender_8][ccci1/fsm]EFUN set to 0
<6>[90579.021302] (4)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 close by
RfxSender_8 rx_len=0 empty=1, clear_cnt=0, drop=0 usagecnt=0
<6>[90579.021308] (4)[1604:RfxSender_8][ccci1/pot]critical user check: 0x7
<6>[90579.021481] (4)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 open with flag
20802 by RfxSender_8
<6>[90579.021491] (4)[1604:RfxSender_8][ccci1/fsm]MD will power off ioctl called
by RfxSender_8
<6>[90579.021513] (4)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 close by
RfxSender_8 rx_len=0 empty=1, clear_cnt=0, drop=0 usagecnt=0
<6>[90579.021519] (4)[1604:RfxSender_8][ccci1/pot]critical user check: 0x7
<6>[90579.024845] (2)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 open with flag
20802 by RfxSender_8
<6>[90579.024867] (2)[1604:RfxSender_8][ccci1/fsm]EFUN set to 0
<6>[90579.024903] (2)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 close by
RfxSender_8 rx_len=0 empty=1, clear_cnt=0, drop=0 usagecnt=0
<6>[90579.024918] (2)[1604:RfxSender_8][ccci1/pot]critical user check: 0x7
<6>[90579.099754] (6)[1604:RfxSender_8]leds_mtk_disp led_debug_log(140) :[Light]
Set lcd-backlight directlyT:90579.18,L:1352 L:1352 map:1352 T:90579.36,L:1353
L:1353 map:1353 T:90579.68,L:1354 L:1354 map:1354 T:90579.86,L:1355 L:1355
map:1355 T:90579.99,L:1356 L:1356 map:1356
<6>[90579.103669] (6)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 open with flag
20802 by RfxSender_8
<6>[90579.103685] (6)[1604:RfxSender_8][ccci1/fsm]MD enter flight mode enhanced
ioctl called by RfxSender_8
<6>[90579.103727] (6)[1604:RfxSender_8][ccci1/chr]port ccci_ioctl1 close by
RfxSender_8 rx_len=0 empty=1, clear_cnt=0, drop=0 usagecnt=0
<6>[90579.103735] (6)[1604:RfxSender_8][ccci1/pot]critical user check: 0x7
<6>[90579.103815] (4)[937:ccci_mdinit][ccci1/fsm]MD stop ioctl called by
ccci_mdinit 1
<6>[90579.103828] (4)[937:ccci_mdinit][ccci1/fsm]command 2 is appended 2 from
ccci_fsm_ioctl
<6>[90579.104259] (2)[259:ccci_fsm1][ccci1/fsm]command 2 process
<6>[90579.104277] (2)[259:ccci_fsm1][ccci1/mcd]md_cd_pre_stop: CCCI modem is
resetting
<6>[90579.104286] (2)[259:ccci_fsm1][ccci1/mcd]disable wdt irq
<6>[90579.104293] (2)[259:ccci_fsm1][ccci1/mcd]share for power off:0
<6>[90579.104300] (2)[259:ccci_fsm1][ccci1/mcd]disable power off check
<14>[90579.128469] (6)[518:init]init: Received sys.powerctl='reboot,recovery' from
pid: 1454 (system_server)
<14>[90579.128486] (6)[518:init]init: sys.powerctl: do_shutdown: 0 IsShuttingDown:
0
<14>[90579.128583] (7)[1:init]init: Got shutdown_command 'reboot,recovery' Calling
HandlePowerctlMessage()
<6>[90579.131830] (0)[1367:AALMain]lm36273_brightness_set: bl level = 1158, tmp_bl
= 1734, hbm level = 0
<3>[90579.133582] (4)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0
<3>[90579.136001] (5)[19178:kworker/u16:2]ghr: scsi_execute exit ret = 0x0

------ KERNEL LOG END at 2022-12-15 12:53:30 ------