A 2X19mm thk.
board finished with
150x150mm MS plate Anthracite Grey laminate 900
welded on MS bars to fix table top
2000 [6'-7"]
Beading with edge binding
200 [8"]
200 [8"]
200 [8"]
Beading with edge banding tape same colour as laminate
430
tape same colour as laminate 12mm. Clear Glass Shelf
12mm MS bar fixed on MS structure with silicon
1050 [3'-5"]
900 [2'-11"]
500 [1'-8"]
powder coated - Anthracite Grey 12mm MS bar Powder
coated -anthracite grey
420
2x19mm thk. commercial board
finished with Grey 12mmX3 MS bar
powder coated -
200 [8"]
200 [8"]
laminate -Luvih 27179 Anchor grey
(merino) Anthracite Grey
Footrest ht. same as bar
12mmX3mm MS bar
stool footrest ht. SECTION-A
powder coated -
Anthracite Grey
PLAN ,PL-1
A
A
2000 2000 [6'-7"]
200 [8"]
1600
200 [8"]
Table Top Projection
200
50 1500 10
12mm MS bar
10
25
powder coated - Anthracite Grey
900 [2'-11"]
500 [1'-8"]
12mm Clear glass shelf
400
500
900
fixed on MS structure with silicon 2x19mm thk. commercial board
finished with Anthracite Grey
200 [8"]
laminate
200
12mmX3 MS Bars
powder coated Grey 12mmX3mm MS bar
powder coated -
Anthracite PLAN ,PL-3
PLAN ,PL-2 Anthracite Grey
2X19mm thk. board finished with
2000 [6'-7"]
Anthracite Grey laminate 200 200
PL-1 Beading with edge binding
200
1600
200 [8"] tape same colour as laminate
400
12mm. Clear Glass Shelf
fixed on MS structure with silicon
1050 [3'-5"]
1050 [3'-5"]
PL-2 12mm MS bar Powder
coated -anthracite grey
420
12mmX3 MS bar
powder coated -
200 [8"]
200 [8"]
Anthracite Grey
PL-3 Footrest ht. same as bar GOOD FOR
ELEVATION-B CONSTRUCTION
ELEVATION-A stool footrest ht.
Note Please : These Drawings are for Design reference to be read in conjunction with HERO CD CI design manual.
GENERAL NOTES:-
PROJECT:- SHEET TITLE :- HERO 2.0 SHOWROOM - COMMUNITY TABLE DETAILS
1. The drawing is copyright of "SIPL" and is not to be produced, copied, handed
over to a third party or used for any purpose other than for which it is delivered. Solizy Innovations Pvt Limited
2. All dimensions shall be counter checked on site prior to commencement of work. Address : 346 A, 3rd Floor, Udyog Vihar,
PROPOSED LAYOUT of 3. All dimensions are in mm.
Phase 4, Gurugram - 122015
HERO MOTORCORP LTD. at 4. Only written dimensions should be followed. DRAWING BY: CHECKED BY : DATE: SCALE: Contact Number : 9810975540
5. Any changes required shall be confirmed from the architect.
BALAJI HERO, SAIYLA, RAJASTHAN 6. This drawing shall be read in conjunction with other pertinent drawings. AS SHOWN email ID : [email protected]
AR.NAZNEEN PARVEEN AR.NEHA KOHLI 20-05-2024
7. Any ambiguity in drawing must be referred to the architect.
