Nypol®
NYPOL A3 HL NTLA010 NR310
Product Description
Lubrificated, Polyamide 66
General Considerations
Resin ID (ISO 1043) · PA66
Addtive · Lubrificated
Processing · Injection Molding
Color · Natural
- The information below is for informational purposes only and should not be adopted as specification limits.
Physical Value Unit Method
Density / Specific Gravity 1,14 g/cm³ ASTM D 792
Viscosity number 45 to 55 ASTM D 2857
Mold Shrinkage 1,15 to 1,17 % ASTM D 955
Water Absorption 1,3 % ASTM D 570
Mechanical Value Unit Method
Tensile Strength 85 MPa ASTM D 638
Elongation at Break 57 % ASTM D 638
Flexural Strength 100 MPa ASTM D 790
Flexural Modulus 2950 MPa ASTM D 790
Izod Notched Impact Strength J/m ASTM D 256
23°C 50
Hardness, Rockwell -- ASTM D 785
Scale R 121
Thermal Value Unit Method
Melting Point 262 °C ISO 3146/A
Heat Deflection Temperature °C ASTM D 648
1,82 Mpa 75
0,45 Mpa 200
Electrical Value Unit Method
Volume Resistivity 1E14 ohm.cm ASTM D 257
Dielectric Constant ASTM D 150
1 MHz 3.6 -
100 Hz 4 -
1000 Hz 3.9 -
Flammability Value Unit Method
Glow Wire @ 2,0 mm 850 °C IEC 60695-2-1
Process Unit Method
Molding Process Temperature 260 to 290 °C --
Mold Temperature 70 to 90 °C --
Drying 80/4 to 6 °C/Hours --
Data contained in this Data Sheet have been obtained in laboratory and reflect the average number of batches produced. This information is current
as of the date on which it was authorized to print this. The Petropol reserves the right to alter designs, specifications and information on its products
at any time or discontinue them, regardless of any notice or statement without incurring liability of any kind.
website: www.petropol.com.br EDITION 4 - 16/05/2022
e-mail:
[email protected] Page 1 /2 Tel: (11) 2189-1200
Nypol®
NYPOL A3 HL NTLA010 NR310
website: www.petropol.com.br EDITION 4 - 16/05/2022
e-mail:
[email protected] Page 2 /2 Tel: (11) 2189-1200
