Scribd
Upload
39 views2 pages

Pi - Titan Eg Atf D-6

Uploaded by

dnoaisaps
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

Pi - Titan Eg Atf D-6

Uploaded by

dnoaisaps
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TITAN EG ATF D-6

High Performance ATF for passenger car automatic transmissions with torque
converters or wet clutches as well as power steering systems. Formulation is licensed
according to DEXRON VI and downwards compatible to old DEXRON-specifications.

Description Advantages/Benefits
TITAN EG ATF D-6 has been developed for GM to  Enhanced shifting performance in older as well as
suit modern automatic transmissions with enhanced modern gearboxes
frictional properties and –durability. The product can  Constant shifting quality over whole lifetime of the
also be applied in power steering systems. TITAN EG gearbox
ATF D-6 is fully licensed acc. to DEXRON VI and  Improved wear protection and consequently longer
downwards compatible to older GM-applications. The lifetime of the aggregate
used Gp. III-base oils achieve very good cold  Higher oxidation stability, thus higher ageing
temperature properties and offer good ageing stability. stability
The application instructions of the transmission  “fill-for-life“-oil, e.g. developed for maximum drain
manufacturer are to be obeyed to. TITAN EG ATF D-6 intervals (up to 250.000 km)
is miscible and compatible with conventional branded
Gear oils. However, mixing with other Gear oils should
be avoided in order to fully utilize the product’s
Approvals
benefits. A complete oil change is recommended
when converting to TITAN EG ATF D-6. For  DEXRON VI (J-60163)
information on product safety and proper disposal  ZF TE-ML 09
please refer to the latest Material Safety Data Sheet.

TYPICAL CHARACTERISTICS
Density at 15 °C DIN 51757 0.846 g/ml
Colour DIN ISO 2049 red ASTM
Flash Point, CoC DIN ISO 2592 206 °C
Pour Point DIN ISO 3016 -54 °C
Dynamic Viscosity at - 40°C DIN 51398 11,000 mPas
Kinematic Viscosity at 40°C DIN 51562-1 29.8 mm²/s
Kinematic Viscosity at 100°C DIN 51562-1 6.0 mm²/s
Viscosity Index DIN ISO 2909 151
Shear Stability, KRL 20h, dkV@100°C CEC-L-45-A-99 -6 %
Shear Stability, KRL 40h, dkV@100°C CEC-L-45-A-99 -7.2 %

PI60440e, PMA, 01.04.2015, Page 1

FUCHS PETROLUB SE Phone +49 621 3802-0 ISO/TS 16949:2009


DIN EN ISO 14001:2004
Friesenheimer Straße 17 Fax +49 621 3802-7190
BS OHSAS 18001:2007
68169 Mannheim/Germany [email protected] REG.NR. 2476
The information contained in this product information is based on the experience and know-how of
FUCHS PETROLUB SE in the development and manufacturing of lubricants and represents the
current state-of-the-art. The performance of our products can be influenced by a series of factors,
especially the specific use, the method of application, the operational environment, component pre-
treatment, possible external contamination, etc. For this reason, universally-valid statements about the
function of our products are not possible. Our products must not be used in aircrafts/spacecrafts or
their components, unless such products are removed before the components are assembled into the
aircraft/spacecraft. The information given in this product information represents general, non-binding
guidelines. No warranty expressed or implied is given concerning the properties of the product or its
suitability for any given application.

We therefore recommend that you consult a FUCHS PETROLUB SE application engineer to discuss
application conditions and the performance criteria of the products before the product is used. It is the
responsibility of the user to test the functional suitability of the product and to use it with the
corresponding care.

Our products undergo continuous improvement. We therefore retain the right to change our product
program, the products, and their manufacturing processes as well as all details of our product
information sheets at any time and without warning, unless otherwise provided in customer-specific
agreements. With the publication of this product information, all previous editions cease to be valid.

Any form of reproduction requires express prior written permission from FUCHS PETROLUB SE.

© FUCHS PETROLUB SE. All rights reserved.

FUCHS PETROLUB SE Phone +49 621 3802-0 ISO/TS 16949:2009


DIN EN ISO 14001:2004
Friesenheimer Straße 17 Fax +49 621 3802-7190
BS OHSAS 18001:2007
68169 Mannheim/Germany [email protected] REG.NR. 2476

You might also like