Scribd
Upload
50 views2 pages

En TDS Monoflex

Uploaded by

Paul Veres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views2 pages

En TDS Monoflex

Uploaded by

Paul Veres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Datasheet

MONOFLEX
Elastic waterproofing acrylic roof coating.
Description Ensure surfaces stable. Remove loose, detached lots,
dirt, oil, dust, etc. Fill and repair any major gaps and
Elastomeric acrylic waterproofing coating for roofs.
cracks with suitable repairing products of BAUER (e.g.
Forms a protective elastic membrane without joints,
BETOFIX B70).
fully waterproof, resistant to environmental corrosion
and UV radiation Resistant to extreme weather
Instructions for use
conditions. The product has a life span of approximately
8 years. MONOFLEX is ready for use. Good stirring in the vessel
for a short time until the mixture is homogeneous is
Examples of applications required. The material is applied by roller or brush in two
or more hands crosswise. Dilute the first hand 10% -15%
MONOFLEX commonly used for waterproofing of
water for a layer as a primer. The second coat is applied
cement, concrete, wood, metal, tile, asphalt membranes
over the first when it is completely dry (when the
on horizontal and vertical surfaces such as:
previous coat is walkable). If necessary apply a third
• Roofs
layer, in the same way. Ensure that the material
• Channels basin
penetrates and fill all the gaps. In cases of large cracks,
• Buildings of bricks or blocks etc.
edges and when we want improved material properties
between layers reinforce with fiberglass or polyester. In
Features - advantages
cases requiring local crack filling, inject MONOFLEX
• Impervious to rain and moisture (diluted 10% with water) directly and then apply the
• Excellent adhesion with substrates such: ceramic reinforcing mesh. Should not be applied under intense
tiles, mortar, tin, aluminum, brick, wood, concrete, solar radiation (temperature greater than 35οC) or
asphalt, etc. rainfall and days where temperature is expected to drop
• Vapor permeable below freezing point. Immediately after use, clean
• Antifungal. application tools with water
• Durable and reflective barrier to UV sunlight.
• High life time. Consumption
• Easy and economical to apply
1-2 kg /m2 MONOFLEX consumption required depends
• Capable of patency.
on the porosity and the flatness of the surface.
Specifications
Packaging
Form: White or terracotta
1, 5, 12.6 kg containers
Density: 1,4 kg / l
Storage
Application temperature: + 5 οC to + 35 οC Preferably in shady and roofed locations, low in
moisture. protected against ice, high temperature and
Elongation at break: > 300% exposure to sunlight for at least 12 months.

Adhesion strength: > 2 N/mm2 Notes


(EN 1504-2 requirement >0,8 N/mm2)
Technical details, properties, recommendations and
information on BAUER products are supplied in good faith.
Capillary Absorption: < 0,1 kg /m2h0,5 They are based on the company's research and experience,
provided that they are stored and applied under normal
Drying time to touch: 2 hours at 20 οC conditions. As the method of using materials as well as project
and environment conditions are beyond the control of the
Full drying time: 10-12 hours at 20 οC company in each individual application setting, the product
user is held solely responsible for the result of application. No
responsibility under any legitimate relationship can be
Service temperature: -15 οC to + 90 οC
substantiated against the company, based on the information
set out hereunder. Product users are advised to refer to the
latest revision of the technical manuals available.
Substrate preparation

EN-TDS BAUER_Monoflex_12.09.2023
Other information
BAUER BUILDING TECHNOLOGIES
Megara Industrial Estate, Attica
Tel: +30 210 5744222
Fax: +30210 5740777
Email: [email protected]
http// www.netbauer.com

Frankfurt, Reg. No 312310 QM and No 312310 UM


Qualitätsmanagementsystem
Zertifiziert nach DIN EN ISO 9001

EN-TDS BAUER_Monoflex_12.09.2023

You might also like