Scribd
Upload
5 views

Module 1 - Introduction

Uploaded by

aryan bansode
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

Module 1 - Introduction

Uploaded by

aryan bansode
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 24

216U06C105 – Engineering Drawing

•Module - I
Parag Sarode
Assistant Professor
Department of Mechanical Engineering
Room – A301
e-mail – [email protected]
Why is this course IMPORTANT !!
What you will learn ?
Engineering Drawing Syllabus !!
Mod. I
Types of lines, Dimensioning, Drawing Sheets, Scales, Pencils etc.
Projection of points and Projections of lines inclined to both planes
Projection of Planes: Triangular, Square, Rectangular, Pentagonal, Hexagonal and circular planes inclined
to one reference plane and perpendicular to other.
Mod. II
Orthographic projections of simple machine parts by first angle method as recommended by Indian
standards, Sectional views of simple machine parts (full section)
Mod. III
Introduction to Isometric drawing and construction of isometric drawing of machine parts
Mod. IV
Introduction to Projection of Solids, Classification of Solids and Projection of right regular solids (prism,
pyramid, cylinder, and cone) inclined to both reference planes (excluding spheres, hollow and composite
solids)
Mod. V
Projection of sectional views for solids (prism, pyramid, cylinder, and cone) cut by plane perpendicular to
one and inclined to other reference planes (excluding curved cutting planes).
Lateral surface development of prism, pyramid, cylinder, cone with section plane inclined to one reference
plane only. (excluding reverse development)
Course Pre-requisites

Knowledge of Various geometric constructions, Basics of trigonometry


Course Objectives

Course
After successful completion of the course students should be able to:
Outcomes
Familiarize with the conventions and standards along with the principles of
1
projections applied to lines and points

Apply the principles of orthographic projections to draw elevation, plan, End view,
2
Isometric views etc.

Apply the principles of orthographic projections to draw to draw various views of


3
regular solid objects

4 Apply the fundamentals of solid geometry and develop lateral surfaces of solids
Course Outcomes
Course After successful completion of the course students should be able to
Outcomes visualize and draw :

CO1 Projection of lines and planes

CO2 Orthographic and sectional views of any 3D object

CO3 Isometric drawing

CO4 Projection of regular solids

Section and lateral development of regular solids


CO5
References
Name/s of Author/s Title of Book Name of Publisher with
country
N.D. Bhatt Engineering Drawing (Plane Charotar Publishing House
and solid geometry) Pvt. Ltd
N.D. Bhatt Machine Drawing Charotar Publishing House
V.M. Panchal Pvt. Ltd
P. S. Gill Engineering Graphics and S.K. Kataria & Sons
Drafting
P. J. Shah Engineering Graphics S. Chand Publications
Dhananjay Jolhe Engineering Drawing Tata McGraw Hill
N. H. Dubey Engineering Drawing
Scheme
Course Code Course Title

216U06C105 Engineering Drawing


TH P TUT Total
Teaching
02 -- 01* 03
Scheme(Hrs.)
Credits Assigned 02 -- 01 03
Marks
Examination CA
ESE TW O P&O Total
Scheme ISE IA
30 20 50 -- -- -- 100
* Batch wise Tutorial
Things to Note!!!

• Please check your LMS regularly for announcements


• Always sit for the lecture with an unruled book and drawing
instruments
• Be NEAT in your drawings !
• Tutorial submissions should be done on a separate A3 sized drawing
book
• Follow the instructions given in the LAB during ED Lab hours
• Timely submissions is required and be regular in attending lectures.
• Failure of submitting Term Work – YOU LOOSE A YEAR !!
Drawing Instruments and
Accessories
Types of lines
Type of lines !!
Type of lines !!
Dimensioning
Aligned and Unidirectional System
Dimension lines Vs Extension lines
Ways to dimension features !
Ways to dimension features !
Drawing sheet layout and size
Scales
SCALES
Scaling is used for
shrinking a large object on
paper

OR

To enlarge an object which


otherwise is too small to
draw on the paper.
Thank you !!

You might also like