FYFE ASIA PTE LTD

PROJECT: Villa Inspiral PAGE: 3 OF 3

DATE : 29/02/2024
LOCATION: Pelat Ground Floor - Strenthening DESIGNED BY: MSJ

STRENGTHENING OF SINGLY REINFORCED RECTANGULAR BEAM WITH TYFO® COMPOSITE SYSTEMS:

Section Details:
ave fc 0.85f'c 0.003

c C a=β1c C

Neutral
D=120mm Axis
d

As T T Єs

Tf Tf Єf
Bf
General Stress Equiv. Rect. Stress
b= 1000 mm Strain Diagram
Distribution Block Distribution Block
Design Data:
Concrete Compressive Cylindrical Strength, f'c = 17.87 Mpa b1 = 0.85 ACI 318-99 Sect. 10.2.7.3

Steel Yield Strength, fy (for main reinforcement) = 400 Mpa rb = 1.94% ACI 318-99 Sect. 10.3
Beam width, b = 1000 mm r min = 0.35% ACI 318-99 Sect. 10.5

Beam depth,D = 120 mm Mrequred = 14.90 Kn-m r max = 1.45% ACI 318-99 Sect. 10.3.3

Reinforcement: 1 layer(s) 7 - 10 mm Stirrup diameter = 10 mm

layer(s) - mm Concrete Cover = 20 mm
layer(s) - mm Effective depth,d = 85.00 mm
2
As = 523.60 mm

Beam Flexural Capacity (ACI 318-99):

Actual Rho, ρ = 0.62% < pmax.Analyze as singly-reinforced beam, use this spreadsheet.
Total Steel area = 523.60 mm 2 Єs = 0.01272 >Єy ~ Tensile bars yield
Effective depth,d = 85.00 mm Єy = 0.00200

If As yield, values for a and c are: If As do not yield, values for a and c are:
a = 13.78844 mm a= - mm fs = - Mpa
c = 16.22169 mm c= - mm

Existing Moment Capacity, Me = 14.723 Kn-m ACI Sect. 9 perlu

FLEXURAL STRENGTHENING OF REC.BEAM/SLAB WITH TYFO ® SYSTEMS: Tensile forces = Compression Forces
Steel contribution = Concrete block Contribution
Select Material: TYFO ® SCH-11UP (Force Equilibrium)
Nos. of Layers: nf = 1
Layer Width: Bf = 100 mm
Composite thickness: tf = 0.35 mm/layer
Composite strength: Kf = 612 N/mm2 = Tensile Modulus x Design Strain

If As yield, values for a and c are: If As do not yield, values for a and c are:
a= 15.20 mm a= - mm fs = - Mpa
c= 17.88 mm c= - mm

Initial Check for Strains in steel and fibre at ultimate Initial Check for Strains in steel and fibre at ultimate
Єs = 0.003*(d-c)/c = 0.01126 yield Єs=0.003*(d-c)/c= - -
Єf = 0.003*(D-c)/c = 0.01713 yield Єf=0.003*(D-c)/c = - -
Єy limit = fy/200000 = 0.002 Єy limit= fy/200000 = -
® ®
Єf limit of tyfo = 0.006 Єf limit of tyfo = -
Revise if fibre does not yield Revise if fibre does not yield

Total Moment Capacity after strengthening with TYFO ® Systems, Mr:

Mr = Ø (As*fs)(d - ((Asfs+nf*tf*Bf*Kf)/0.85f'c*b)/2) + Ø nf*tf*Bf*Kf*( D -((Asfs+nf*tf*Bf*Kf)/0.85f'c*b)/2) Force Equilibrium
Mr = 16.757 Kn-m Strain Compatibility

Moment Increase after strengthening with TYFO ® Systems, Mi:

Mi = 2.03 Kn-m

Adjust ultimate fibre strain

Revised Ult. Fibre strain = 0.0059 <= Єf limit of 0.006 Kfrev.= 602 N/mm2

If As yield, values for a and c are: If As do not yield, values for a and c are:
arev = 15.18 mm arev = - mm fsrev = - Mpa
crev = 17.85 mm crev = - mm
Єsrev = 0.01128 yield Єsrev = - -
Єfrev = 0.01716 ok Єfrev = - -

Mr rev = 16.723 Kn-m Ok! > Mreq'd % M increase = 13.59%