Motors | Automation | Energy | Transmission & Distribution | Coatings

Automation & Motors

European Product Lines
 www.weg.net

2 Automation & Motors - European Product Lines

Automation
& Motors
Summary
Presentation 04

WEG Around the World 06

Motor Start and Protection 08

Push Buttons and Pilot Lights 10

Switch-Disconnectors 10

Electrical Circuit Protection 11

Electrical Connectors 13

Power Factor Correction 14

Drives 15

Programmable Logic Controllers - PLC 23

Operating Interface 24

Free Software 24

Distribution and Command Electric Systems 26

Industrial Motors 28

Smoke Extraction Motors 35

Roller Table Motors 36

Industrial Motors 38

Applying Motors with Frequency Drives 44

THE WEG
GROUP

WEG is a global manufacturer of premium electric products for the industry. Counting on more than
30,000 employees all over the world and a daily production of 60,000 motors, WEG became the
leading electric motor producer in the Americas and one of the largest suppliers of electric-
electronic products and systems in the world.

Doing business in over 135 countries, with revenues of about US$ 3.2 billion, WEG global presence is supported trough its
branches established in 29 countries, manufacturing plants and a network of distributors and agents in the five continents.
All WEG customers in many industry segments have a long-lasting relationship with the company due to the commitment
and reputation the company has established with them in order to keep their industry operating.

4 Automation & Motors - European Product Lines

 www.weg.net

Global Presence
WEG Serves you in Europe
Our global structure allows us to be closer to our customers. Over 32 subsidiaries established in key countries are prepared
to provide you with technical and commercial support; our manufacturing plants strategically located in the main markets
can serve you with short deliveries; and our network of over 1,250 authorized service agents located in the five continents
are fully equipped to give you prompt after sales and service support.

Automation & Motors - European Product Lines 5

 www.weg.net

MANUFACTURING
SITES
GERMANY
2 MANUFACTURING
SITES

USA
2 MANUFACTURING SITES PORTUGAL
1 MANUFACTURING SITE

MEXICO SPAIN
3 MANUFACTURING 1 MANUFACTURING SITE
SITES
COLOMBIA
2 MANUFACTURING
SITES BRAZIL
14 MANUFACTURING
SITES

ARGENTINA
3 MANUFACTURING
SITES

6 Automation & Motors - European Product Lines

 www.weg.net

AUSTRIA
1 MANUFACTURING
SITE

CHINA
3 MANUFACTURING
SITES

INDIA
1 MANUFACTURING
SITE

SOUTH AFRICA
4 MANUFACTURING
SITES

Automation & Motors - European Product Lines 7

 www.weg.net

Motor Start and Protection

CWB Contactors

JJ Compact solution up to 38 A and 45 mm wide

JJ Built-in auxiliary contacts 1NO + 1NC
JJ Low energy consumption DC coils allow direct drive of the
contactors via PLCs, inverter outputs or soft-starters without
requiring an interface relay
JJ More compact assemblies of motor starters
JJ Developed according to IEC 60947 and UL 508 international
standards
JJ Wide range of accessories

Start with CWB contactor and MPW

motor protective circuit breaker

CWM Modular Contactors

JJ Complete line from 9 to 800 A (AC-3)

JJ 3-pole and 4-pole contactors
JJ Quick mounting on 35 mm DIN rail or screw mounting
JJ Contactors available in several command voltages and frequencies
(AC or DC)
JJ Direct mounting of contactors on overload relays up to 105 A
JJ Wide range of accessories
JJ Easy connection busbars for star-delta or reversing starters
interconnection, allowing fast mounting and reducing space

CWC0 Compact Contactors

JJ Complete line from 7 to 22 A (AC-3)

JJ Quick mounting on 35 mm DIN rail or screw mounting
JJ Built-in auxiliary contacts up to 16 A
JJ Low-consumption DC coils, allowing direct connection to PLCs
JJ Direct mounting on RW17 overload relays
JJ Same dimensions (AC or DC coil) for models up to 16 A

RW Thermal Overload Relays

JJ Current setting range from 0.28 to 840 A

JJ Tripping class 10
JJ Versions allowing direct mounting to compact contactors/
contactors, screw mounting or DIN rail mounting with accessory
JJ Adjustable multifunction key with HAND, AUTO, H or A functions
JJ Auxiliary contacts 1NO + 1NC

8 Automation & Motors - European Product Lines

 www.weg.net

RW_E Electronic Overload Relays

JJ  hree-pole electronic overload relay with selectable trip class: 10,

T
20 and 30
JJ Phase loss protection (time delay <5 seconds)
JJ Phase unbalance protection (>40% between phases)
JJ Temperature compensated
JJ Manual or automatic reset
JJ Direct mounting on CWB9...38 and CWM9...105 contactors
JJ Allows individual mounting with accessories
JJ Auxiliary contacts 1NO + 1NC

MPW Motor-Protective Circuit Breakers

JJ  otor-protective circuit breakers with high short-circuit breaking

M
capacity up to 100 A (Ue ≤ 690 V)
JJ Compact solution up to 40 A and 45 mm wide and up to 80 A
54 mm wide
JJ Motor start and protection up to 40 cv at 220 V and 75 cv at
380/440 V
JJ Adjustable thermal releases to protect the motor against overload
JJ Magnetic releases for short circuit protection fixed at 13xIn

DLW Enclosed Starters

JJ  hree-phase contactors in thermoplastic enclosures up to 40 cv at

T
220 V and 75 cv at 380/440 V, and single-phase contactors
JJ Star-delta starters in thermoplastic enclosures up to 20 cv at 220 V
and 40 cv at 380 V
JJ Star-delta, reduced-voltage and series-parallel starters in metallic
enclosure starting from 15 cv

RTW17, ERWT, RPW, ERWM and RNW Electronic Relays

JJ LED status indicators

JJ Simple configuration and operation
JJ Adjustments via external selectors
JJ High-reliability contacts
JJ Excellent accuracy, repeatability and noise immunity
JJ Mounting on DIN rail or screw mounting
JJ Compact enclosure 22.5 mm and 17.5 mm wide
JJ Available models:
JJ 
Timers: simple function and timing (RTW17), multi timing
(RTW-MAT/MBT) or multifunction (ERWT)
JJ 
RIEW digital impulse relay: control of automation systems in
homes, hotels and commercial or residential buildings
JJ 
Voltage monitoring relays: single monitoring (RPW) or
multifunction (ERMW)
JJ Level relays: filling and draining (RNW)

Automation & Motors - European Product Lines 9

 www.weg.net

Motor Start and Protection

SRW01 Smart Relay

JJ  eliability and accuracy in monitoring, operation and protection of

R
low voltage electric motors
JJ Supply voltage: 24 V ac / V dc or 110/240 V ac / V dc

JJ Plug & Play Philosophy

JJ Modular design

JJ 
Communication networks: Modbus-RTU, Profibus-DP, DeviceNet or
EtherNet1)
JJ USB port

JJ Free WLP programming software (WEG Ladder Programming)

Optional Items:
JJ 
Operating interface (HMI) for cabinet door mounting: monitoring,
parameterization and operation with copy function and serial
communication
JJ Current and voltage or current measuring units

JJ 
Current Measuring Unit (CMU): current monitoring on the three
motor phases
JJ 
Current and Voltage Measuring Unit (CVMU): current monitoring
on the three motor phases, voltage monitoring up to 690 V, phase
sequence, power factor and other motor powers, allowing the
management of electric energy consumption in kW/h

Note: 1) EtherNet Modbus-TCP, available soon; please, wait!

Push Buttons and Pilot Lights

CSW Pushbuttons, Selector Switches and Pilot Lights

JJ  Developed for different applications, harsh and industrial

environments
JJ Degree of protection IP66
JJ Illumination blocks with integrated LED (high efficiency)
JJ Quick and easy mounting system
JJ High-reliability auxiliary contacts
JJ Wide range of accessories

Switch-Disconnectors
MSW Compact Switch-Disconnector

JJ Rated currents: 12 to 160 A

JJ Developed according to IEC 60947-3
JJ Compliance with the requirements of NR12 standard
JJ Modern and compact design for simple installation
JJ Complete line of accessories
JJ Terminals with degree of protection IP20
JJ Handle with degree of protection IP65
JJ Handles allow using up to 3 padlocks
JJ Handles allow door interlocking
JJ ON/OFF indication on the handle in Portuguese, as required by
Brazilian NR12 standard
JJ Base mounting or top mounting

10 Automation & Motors - European Product Lines

 www.weg.net

Electrical Circuit Protection

FU aR Ultra-Fast Fuses

JJ Class aR - for semiconductor protection

JJ NH-type aR fuses with nominal currents from 20 to 1,000 A in
four sizes
JJ High breaking capacity (type D = 50 kA, type NH = 120 kA)
JJ Technical specification according to IEC 60269 standard
JJ High breaking capacity

ABW Air Circuit Breaker

JJ Rated currents: 800 to 6,300 A

JJ Available in two versions: fixed and withdrawable
JJ Short-circuit breaking capacity up to 120 kA (380/415 V)
JJ Standard protection units with:
JJ LSIG protection

JJ Protection units with option of:

JJ Earth leakage protection

JJ Network communication

JJ Compact model
JJ Wide range of accessories
JJ More built-in protections as default
JJ Network communication: Modbus and Profibus (optional)

ACW Molded-Case Circuit Breaker

JJ Rated currents: from 20 to 1,600 A

JJ Short-circuit breaking capacity up to 200 kA (200/240 V)
JJ Broad range of internal and external accessories
JJ Trigger options:
JJ Adjustable thermal and fixed magnetic

JJ Adjustable thermal and magnetic

JJ Electronic

JJ Magnetic only

JJ Technical specifications according to IEC/EN 60947-2

Automation & Motors - European Product Lines 11

 www.weg.net

Electrical Circuit Protection

DWB Molded-Case Circuit Breakers

JJ Rated currents: 16 to 1,600 A

JJ Short-circuit breaking capacity up to 80 kA (380/415 V)
JJ Models with thermal and adjustable magnetic triggers
JJ Broad range of internal and external accessories
JJ Technical specifications according to IEC/EN 60947-2
JJ DWB1000 and DWB1600 with LSI electronic protection

MDWH Miniature Circuit Breakers 10 kA

JJ Curves B and C
JJ Rated currents: from 6 to 63 A
JJ 1, 2, 3 and 4 poles
JJ Breaking capacity:
JJ 10 kA - NBR NM 60898 (residential purpose)

JJ 10 kA - IEC/EN 60947 (industrial purpose)

JJ Side auxiliary contact block

JJ Possibility of padlock locking (optional)
JJ Undervoltage coil (optional)
JJ Side alarm contact block

MDW Miniature Circuit Breakers 3 kA

JJ Curves B and C
JJ Rated currents: 2 a 125 A
JJ 1, 2, 3 and 4 poles
JJ High breaking capacity:
JJ 3 kA - NBR NM 60898 (residential purpose)

JJ 5 kA - IEC/EN 60947 (industrial purpose)

JJ Side auxiliary contact block (optional)

JJ Padlock (optional)

SIW Switch-Disconnectors

JJ They disconnect electric circuits with rated currents up to 100 A

JJ 2, 3 and 4 poles
JJ According to standard IEC 60947-3
JJ Possibility of padlock locking (optional)
JJ Auxiliary contact block (optional)

12 Automation & Motors - European Product Lines

 www.weg.net

RDW Residual Current Circuit Breakers

JJ Current leakage protection

JJ 30 mA sensitivity (life protection) or 300 mA (installation protection)
JJ 2 and 4 poles
JJ Rated currents: 25 to 100 A
JJ Padlock (optional)

Electrical Connectors
BTW Terminal Blocks

JJ  crew line: cables from 0.5 to

S JJ  ini Terminal Screw Line:
M
240 mm2 cables 0.5 to 4 mm2
JJ Cage clamp line: cables from JJ Mini Terminal Cage Clamp
0.5 to 10 mm2 Line cables: 0.5 to 2.5 mm2
JJ 
Push-in line: cables 0.5 to 10 mm2 JJ Wide range of accessories
JJ Lug line: cables 0.5 to 10 mm2 JJ Many options of identifiers and
JJ Relay line markers
JJ Reversible contact

JJ Plug-in relay

Plotter Plotter
JJ  3 printing area
A JJ  ble to print on elements up to
A
(440 mm x 305 mm) and A4 10.5 mm high
(297 mm x 210 mm)  JJ Automatic calibration - prevents
JJ Allows quick change of manual adjustments
printing plates JJ USB connection
JJ Complete line of accessories

Automation & Motors - European Product Lines 13

 www.weg.net

Power Factor Correction

Active power (kW)

Reactive power (kvar)

ϕ
Power factor Energy efficiency factor
Ap
pa
re n
tP
ow
FP = kW = cosϕ er
(kV
A)
In a three-phase power line, three quantities represents kVA
the electrical installation:
JJ Active power: kW (generates work)

JJ Reactive power: kvar (creates magnetic field)

(The more kvar circulates through the line and the transformer/generator,
JJ Apparent power: kVA (total power consumed)
the higher the kVA consumed and the lower the power factor.)

Power Factor Correction Capacitors

JJ  Max. 20 mm
Coils produced with self-healing, dry dielectric, metalized
polypropylene film
JJ 
Built-in discharge resistors in three-phase units, modules
Interruption area
and banks
JJ Dielectric losses smaller than 0.4 W/kvar Expandable groove

JJ 
Manufactured in 50 and 60 Hz, in accordance with
NBR IEC 60831 Normal Expanded
JJ Self-healing

JJ Explosion protection device Fig. 1 Internal view of UCWs Fig. 2 UCW normal x UCW expanded

UCW Single-Phase Capacitive Units

JJ Power up to 10 kvar, diameters from 40 to 75 mm and 535 V ac

JJ Capacitive units for mounting of modules and three-phase banks
JJ Replacement of expanded cells in the modules and banks
JJ Separate discharge resistors

UCWT Three-Phase Capacitive Units

JJ Ideal for localized/individual motor correction:

JJ 0.5 to 20 kvar at 220 V
JJ 0.5 to 35 kvar at 380/440/480 V

JJ 40 to 50 kvar at 380/440/480/535 V

JJ Built-in discharge resistors

JJ Protecting cover for connections
JJ Philips and box terminals

MCW Three-Phase Capacitor Modules

JJ Power: up to 60 kvar and 480 V ac

JJ Single-phase capacitive units connected in delta
JJ Built-in discharge resistors
JJ You can associate up to 4 modules through interconnection
busbars, reaching the equivalent powers to the banks (best cost-
benefit)

14 Automation & Motors - European Product Lines

 www.weg.net

CWMC Contactors for Switching Capacitors

JJ Available for switching capacitor banks of up to 61 kvar at 400/415 V

JJ Direct mounting on DIN rail 35 mm or screw mounting
JJ Developed with pre-charge resistors to reduce high in-rush currents

Drives
CFW100 Variable Speed Drive

JJ  upply voltage: 200-240 V

S JJ  emote operating (HMI)
R
(single-phase) interface (accessory)
JJ 
Rated currents: 0.18 to 0.75 kW JJ Flash memory module
(0.25 to 1 HP) (accessory)
JJ 
Vector control (VVW) or scalar JJ Communication RS485
control (V/F) (accessory)
JJ Plug & Play accessories JJ USB communication
JJ 
Built-in operating (HMI) interface (accessory)
JJ 
Surface or DIN rail mounting JJ Free programming software:
JJ Protection degree IP20 JJ SuperDrive G2 and WLP
JJ Removable fan JJ SoftPLC Function
JJ 
Alarm or fault diagnosis JJ RFI footprint filter (accessory)
JJ 
Electronic protection against
motor overload

CFW300 Variable Speed Drive

JJ  upply voltage: 110 V or 230 V
S JJ  uilt-in operating interface
B
(single-phase or three-phase) (HMI)
JJ Rated currents: from 1.6 to JJ Scalar (V/F) or vector (VVW)
15.2 A control modes
JJ 4 PNP or NPN digital inputs JJ SoftPLC: built-in software
JJ 1 relay output 0.5 A/250 V ac resource, equivalent to a small
JJ 1 analog input 0-10 V dc / PLC
4-20 mA JJ Footprint RFI filter (accessory)
JJ 3C2 coating class JJ Accessories for functionality
(IEC 60721-3-3 on internal expansion: RS485, RS232,
circuits) CANopen, DeviceNet,
JJ Easy installation Profibus-DP, USB, encoder,
JJ Flash memory module infrared remote control and
(accessory) sensor, input and output
JJ WPS software: on-line expansion
monitoring, programming and
configuration of CFW300

Automation & Motors - European Product Lines 15

 www.weg.net

Drives
CFW500 Variable Speed Drive

JJ Power range: 0.18 to 15 kW (0.25 a 20 HP)

JJ Supply voltage: 200-480 V - single-phase or three-phase
JJ Rated currents: 1 to 56 A
JJ Controls: vector (VVW), scalar (V/F), vector sensorless or with
encoder and energy saving mode (EOC)
JJ Built-in SoftPLC function
JJ Multipump applications
JJ Operating interface (HMI)
JJ RS485 port (built-in in any model of plug-in module)
JJ Plug-in cards for resource expansion1)
JJ Free programming software: WLP and SuperDrive G2
JJ Optional items:
JJ RFI filter

JJ USB communication port

JJ 
Memory card: allows data transfer (parameters and SoftPLC)
between inverters, without the necessity to energize them
JJ 
Network communication: CANopen, DeviceNet, Profibus-DP,
RS232, RS485, EtherNet-IP, Modbus-TCP and Profinet-IO
Note: 1) Select the plug-in module + CFW500 without plug-in module.

CFW700 Variable Speed Drive

JJ Power range: 1.1 to 132 kW (1.5 to 150 HP)

JJ Supply voltage: 200-600 V
JJ Rated currents: 2.9 to 211 A
JJ V VW Voltage Vector WEG, vector with and without encoder
(sensorless)
JJ Plug & Play Philosophy
JJ Built-in SoftPLC function - adds the functionalities of a PLC to the
CFW700
JJ Smart thermal management
JJ Degree of protection IP20, IP21, NEMA1 and IP55
JJ Incorporated DC link inductor
JJ Incorporated input for incremental encoder and RS485
communication port (Modbus)
JJ LCD operating interface (HMI) with backlight and USB port
JJ RFI filter according to EN 61800-3 (optional)
JJ Communication: CANopen, DeviceNet and Profibus-DP (optional)
JJ Safe Torque OFF Module (STO) for safety stop:
JJ  Category 3 PL e/SIL CL 2 certified by TÜV Rheinland® according
to EN ISO 13849-1, IEC 61800-5-2, IEC 62061 and IEC 61508
standards
JJ Flash memory module (optional)
JJ Free WLP and SuperDrive G2 programming softwares

16 Automation & Motors - European Product Lines

 www.weg.net

CFW501 HVAC Variable Speed Drive

JJ Power range: 0.18 to 7.5 kW (0.25 a 10 HP)
JJ Supply voltage: 200-480 V
JJ Rated currents: 1.0 to 31 A
JJ Control types: scalar (V/F), vector (VVW) and energy saving (EOC)
JJ Harmonic Mitigation Technology (HMT) - reduces the quantity of
harmonics emitted to the power line (with no need of an input
reactance)
JJ Special functions:
JJ Energy saving

JJ Dry pump and broken belt to identify load anomalies

JJ 
Short cycle protection to increase the service life of compressor
applications
JJ 
Bypass - allows the motor to be directly started from the power
supply
JJ 
Fire mode - ideal for applications with smoke exhausters and
heating system exhaust fans
JJ Sleep mode - optimizes the use of the motor

JJ SoftPLC: adds the functionalities of a PLC to the CFW501 HVAC

JJ Advanced PID

JJ Built-in accessories:
JJ RFI filter

JJ Operating interface (HMI) with specific units for HVAC applications

JJ BACnet, Metasys N2 and Modbus-RTU communication protocols

JJ SuperDrive G2 and WLP free software

CFW701 HVAC Variable Speed Drive

JJ Power range 1.1 to 132 kW (1.5 to 150 HP)

JJ Dedicated to HVAC applications (heating, ventilation, air
conditioning and refrigeration)
JJ Supply voltage: 200-480 V ac
JJ Rated currents: 3.6 to 211 A
JJ Degree of protection: IP20, IP21, NEMA1 and IP55
JJ RFI filter
JJ Inductor on the DC link
JJ Operating interface (HMI) with specific units for HVAC applications
and USB communication port
JJ BACnet, Metasys N2 and Modbus-RTU communication protocols
JJ Accessories:
JJ Flash memory module

JJ Module with relay outputs

JJ Special functions:
JJ Energy saving

JJ Dry pump and broken belt to identify load anomalies

JJ Short cycle protection to increase the service life of compressors

JJ Bypass - allows the motor to be directly started from the power

supply
JJ Fire mode - ideal for applications with smoke exhausters and
heating system exhaust fans
JJ Sleep mode - optimizes the use of the motor

JJ SoftPLC: adds the functionalities of a PLC to the CFW701 HVAC

JJ Optional:
JJ Switch-disconnector incorporated to the product

JJ Free programming software:

JJ WLP - for SoftPLC programming

JJ SuperDrive G2 - for on-line parameterization, command and

monitoring

Automation & Motors - European Product Lines 17

 www.weg.net

Drives
CFW11 Variable Speed Drive

JJ Power range: 1.1 to 630 kW (1.5 to 900 HP)

JJ Supply voltage: 200-690 V
JJ Rated currents: 3.6-2,500 A
JJ Vectrue Technology® - linear and adjustable V/F scalar control,
VVW (Voltage Vector WEG), vector sensorless (without encoder)
and with encoder, vector WMagnet sensorless (without encoder)
and with encoder
JJ Optimal Breaking® - WEG inverter breaking technology
JJ Optimal Flow® - for use in constant torque loads
JJ Smart thermal management
JJ Degree of protection: IP20, IP21, NEMA1 and IP55
JJ Built-in inductor on the DC link
JJ Single DC busbar
JJ Plug & Play Philosophy
JJ USB port
JJ Real time clock
JJ Built-in SoftPLC function - adds the functionalities of a PLC to the
CFW11
JJ Operating interface (HMI) with graphic display and backlight
JJ Optional accessories:
JJ Expansion boards of digital and analog inputs and outputs

JJ Incremental Encoder Module

JJ  Safe Torque OFF Module (STO) for safety stop: category 3 PL and
SIL CL 2 certified by TÜV Rheinland®, according to EN ISO 13849-1,
IEC 61800-5-2, IEC 62061 and IEC 61508 standards
JJ  Communication modules: DeviceNet, EtherNet-IP, Profibus-DP,
RS232, RS485, Modbus-TCP and Profinet-IO
JJ RFI suppressor filter (optional, except for sizes E, F, G and H which
already have built-in RFI filter)
JJ Also available in modular versions
JJ Free SuperDrive G2 Software, for inverter parameterization,
command and monitoring with USB connection
Note: 1
 ) Models above 1,141 A are mounted on modular complete drive panels (AFW11M / W).

MW500 Motor Drive

JJ Power range: 0.75 and 3.7 kW (1 and 5 HP)

JJ Three-phase supply voltage: 220-480 V
JJ Rated currents: 4.3 to 10.0 A
JJ 4x/IP66 NEMA protection
JJ Adaptable to WEG W22 motor line or wall mounting (optional)
JJ Switch-disconnector
JJ LED operation indicators
JJ Compatible with the main accessories of the CFW500

18 Automation & Motors - European Product Lines

 www.weg.net

AFW11 Complete Drive with Variable Speed Drive

JJ Power range: 37 to 630 kW (50 to 900 HP)

JJ Mounting on panel with degree of protection IP42
JJ Supply voltage: 380 to 480 V - 50/60 Hz
JJ Command voltage: 220 V ac - 50/60 Hz
JJ Optional accessories
JJ Ease of use

AFW11M/AFW11W Modular Variable Speed Drive

JJ Power range: 270 to 2,000 kW (350 to 2,500 HP)

JJ Ideal solution to drive high-power motors
JJ Configuration through power modules (books)
JJ Modular structure - more compact
JJ Air-cooled (AFW11M)
JJ Input rectifier in 6 pulses, 12 pulses or regenerative
JJ Supply voltage 380-690 V
JJ Rated currents: 340 to 2,850 A
JJ Same optional items and accessories of the CFW11

MVW01 Medium Voltage Variable Speed Drive

JJ Motor voltages: 2.3 kV; 3.3 kV; 4.16 kV and 6.9 kV

JJ Power: 400 kW to 16,000 kW (500 HP to 22,500 HP)
JJ Power and control insulated by fiber optic
JJ Withdrawable power arms for quick and easy replacement
JJ Easy-to-use graphic operating interface (HMI)
JJ Compact model with standard 18-pulse rectifier
JJ Network communication: DeviceNet, Modbus, Profibus-DP and
EtherNet
JJ Dry-type plastic film power capacitors with high reliability and long life
JJ Imposed voltage
JJ Air-cooling
JJ High efficiency (>99%)
JJ High power factor (>95%)
JJ Low noise level (<75 dB)
JJ Low heat dissipation

MVW3000 Medium Voltage Variable Speed Drive

JJ  otor voltage: 2.3 kV, 3.3 kV, 4.16 kV, 5.5 kV, 6 kV, 6.3 kV, 6.6 kV,
M
6.9 kV, 7.2 kV and 8 kV1)
JJ Motor current: up to 200 Amps1)
JJ Input voltage: 2.3 kV...13.8 kV2)
JJ Reliable air-cooled design
JJ Total harmonics compliance with IEEE 519
Notes: 1
 ) Higher voltage/current under request.
2) Contact factory for voltages above 7.2 kV.

Automation & Motors - European Product Lines 19

 www.weg.net

Drives
SSW05 Soft-Starter

JJ Power rating: 0.55 to 55 kW (0.75 to 75 HP)

JJ Rated currents: 3 to 85 A
JJ Voltage: 220 to 575 V
JJ Incorporated bypass
JJ Control with DSP
JJ Remote operating interface (HMI) (optional)
JJ Built-in motor protections
JJ Operation in environments up to 55 ºC

SSW06 Soft-Starter

JJ Power rating: 2.2 to 1,800 kW (3 to 2,500 HP)

JJ Currents: 10 to 1,400 A (200-575 V) and 45 to 1,400 A (575-690 V)
JJ Incorporated bypass up to 820 A
JJ Allows motor inside delta connection (6 cables only for 220-575 V
models) or standard connection (3 cables)
JJ Removable operating interface (HMI) with double display (LED/LCD)
JJ Kick-start function (torque pulse at starting)
JJ Pump control function for smart control of pumping systems
JJ Multimotor function
JJ Built-in motor protections
JJ Operation in environments up to 55 ºC
JJ Torque control
JJ Built-in SoftPLC function - adds the functionalities of a PLC to the
SSW06
JJ Input and output expansion module
JJ Modbus-RTU communication via RS232 (incorporated),
Profibus-DP, DeviceNet, EtherNet/IP and Modbus/TCP, RS458 or
USB (optional)
JJ Free SuperDrive G2 programming software

SSW07 Soft-Starter

JJ Power rating: 4 to 315 kW (6 to 450 HP)

JJ Rated currents: 17 to 412 A
JJ Voltage: 220 to 575 V
JJ Incorporated bypass
JJ High starting duty
JJ Total control on the three phases
JJ Built-in motor protections
JJ Kick-start function (torque pulse at starting)
JJ Local or remote operating interface (HMI) (optional)
JJ Operation in environments up to 55 ºC (without current derating for
all models)
JJ Interconnection with Fieldbus communication networks:
Modbus-RTU, DeviceNet and Profibus-DP (optional)
JJ Free SuperDrive G2 programming software

20 Automation & Motors - European Product Lines

 www.weg.net

SSW08 Soft-Starter

JJ Power rating: 4 to 315 kW (6 to 450 HP)

JJ Rated currents: 17 to 412 A
JJ Voltage: 220 to 575 V
JJ Incorporated bypass
JJ High performance
JJ Built-in motor protections
JJ Kick-start function (torque pulse at starting)
JJ Local or remote operating interface (HMI) (optional)
JJ Operation in environments up to 55 ºC (without current derating for
all models)
JJ Interconnection with Fieldbus communication networks:
Modbus-RTU, DeviceNet and Profibus-DP (optional)
JJ Free SuperDrive G2 programming software

SSW900 Soft-Starter

JJ Rated currents: 10 to 412 A

JJ Removable graphic HMI allows copying and downloading parameters
from one SSW900 to another
JJ HMI with incorporated USB port for communication with the PC
JJ Monitoring of the variables in graphic mode and configurable initial
screens
JJ Real time clock
JJ Four selectable languages
JJ Fault and alarm log saved with time and date, exportable to .csv file
JJ Supply voltage of 220 to 575 V
JJ Oriented start-up
JJ Standard connection (3 cables) or motor inside delta connection
(6 cables)
JJ Control methods: voltage ramp, current limit, current ramp, pump
control and torque control
JJ Pump control function for smart control of pumping systems that
avoids hydraulic hammer and pressure overshoots on hydraulic piping
JJ Integral motor thermal protection
JJ Increased motor and equipment service life
JJ Limitation of voltage drops at the start
JJ Incorporated bypass, providing size reduction and energy savings
JJ Fire mode (emergency start)
JJ Operation in ambient temperature up to 55 °C without current derating
JJ Input for thermistor (PTC)
JJ Communication accessories: RS485, DeviceNet, Profibus-DP,
EtherNet-IP, Modbus-TCP and Profinet-IO

Automation & Motors - European Product Lines 21

 www.weg.net

Drives
SSW7000 / NEMA Medium Voltage Soft-Starter

JJ Supply currents: 2.3 kV; 3.3 kV; 4.16 kV and 6.9 kV

JJ Power: 560 kW to 3,300 kW (750 HP to 4,500 HP)
JJ Rated currents: 125 A, 180 A, 250 A, 300 A, 360 A, 500 A and 600 A
JJ Degree of protection: IP41, NEMA12
JJ Operating interface (HMI) with graphic LCD
JJ Real time clock
JJ Main and bypass vacuum contactors
JJ Medium voltage fuses
JJ Input switch-disconnector
JJ Power and control insulated by fiber optic
JJ Flash memory module (optional)
JJ SoftPLC function
JJ Free WLP and SuperDrive programming software
JJ USB connection to PC
JJ Motor thermal protection - Pt-100 (optional)
JJ 5 starting modes
JJ Boards for network communication: DeviceNet, Profibus-DP,
EtherNet and Modbus, RS232 or RS485 interfaces (optional)

SCA06 Servo Drive

JJ  igh-performance servoconverter for speed, torque and servomotor

H
position control
JJ Supply voltage 220 or 380 V ac
JJ Precision of movement control
JJ Operation in closed loop
JJ Position feedback by resolver
JJ Independent control and power supply
JJ Flexibility and integration to drive
JJ HMI with six-digit LED display
JJ USB port
JJ CANopen / DeviceNet in the standard version
JJ 64-kbyte internal PLC with ladder programming language
JJ RFI filter (optional)
JJ Available communication networks: Modbus-RTU, Profibus, EtherCAT,
EtherNet-IP and EtherNet-TCP-IP
JJ Safe Torque OFF Module (STO) of safety stop - Category 4, PLe / SIL CL3

SWA Servomotors

JJ Supply voltage: 220 V ac or 380 V ac

JJ Torque: 0.8 to 40 Nm
JJ Servomotor option with electromagnetic brake at 24 V dc
JJ Degree of protection IP65
JJ Internal thermal Protector (PTC) 55º
JJ Rare earths magnets (neodymium, iron, boron)

22 Automation & Motors - European Product Lines

 www.weg.net

CTW900 AC/DC Converter

JJ Drive and control of direct current (DC) motors

JJ Rated currents: 20 to 2,000 A1)
JJ Speed or torque control
JJ Simplified connections to power and control
JJ Internal supply for the field bridge
JJ Operating interface (HMI) with LCD display
JJ USB port for serial communication and software update
JJ SoftPLC function on the standard CTW900 to create specific
programs
JJ Free programming and monitoring software
JJ Memory card for backup of parameters and software applications
JJ 3 options of speed feedback: incremental encoder, DC tachogenerator
or counter-electromotive force (CEMF)
JJ Network communication: DeviceNet, Profibus-DP, EtherNet-IP,
Modbus-TCP, Profinet0-IO, RS485 and RS232
Note: 1) Output currents 1,500 to 2,000 A available soon. Please wait!

Programmable Logic Controllers - PLC

PLC300 Programmable Logic Controller

JJ PLC with incorporated HMI, complete and expandable

JJ 10 digital inputs and 1 analog input
JJ 9 digital outputs (1 fast) and 1 analog output
JJ Battery voltage monitoring, informing the replacement moment
without losing the application
JJ PWM ramp function
JJ Internal flash memory that enables the automatic recovery of the
resource in case of battery fault
JJ 5 incorporated ports: EtherNet, CANopen, RS232, RS485 and USB
JJ E xpansion of digital and analog inputs and outputs via CANopen or
CFW11 modules
JJ SD memory card (Secure Device)1) for data, program and event log
storage
JJ Programming in ladder language via WPS software (WEG
Programming suite), according to IEC 61131-3
JJ Built-in encoder input (100 kHz)
JJ RUW01: 14 - DI and 10 - DO, PNP/NPN at 24 V dc
JJ RUW01-CN13DI: 13 - DI, PNP/NPN at 24 V dc
JJ RUW02: 7 - analog inputs 0 to 10 V dc or 4 to 20 mA 24 bits
JJ RUW04: 7 - J/K type thermocouple inputs 24 bits
JJ RUW06: 2 analog inputs for load cell
JJ RUW03-CN8AO: 8 analog outputs of 0 to 10 V dc or 4 to 20 mA
JJ RUW05-CN4RTD: 4 Pt-100 or Pt-1000 inputs
Note: 1) SD card not included.

Automation & Motors - European Product Lines 23

 www.weg.net

Operating Interface
MT Graphic Operating Interfaces (HMIs)

JJ  olor graphic HMIs with touchscreen, available in 4, 3, 7, 10 or 15”

C
models
JJ Modern visual with flexible and versatile programming software
JJ Application simulator software
JJ Degree of protection IP65
JJ USB, EtherNet, RS232, RS485 and RS422 communication ports

Free Software

WLP - WEG Ladder Programmer

JJ Development of software applications

JJ Function programming
JJ SoftPLC
JJ Ladder language
JJ Control mathematical PLC blocks
JJ On-line monitoring and help
JJ USB connection

SuperDrive G2

JJ USB connection to inverter, servoconverter and soft-starters

JJ Parameterization, command and signaling
JJ Recording of software application (via SoftPLC)
JJ On-line monitoring and help

Trace Function

JJ  ustomizable tool that monitors and stores variable registers in the

C
inverter memory, activated by the occurrence of an event (e.g., overload)
JJ Registration and graphic view of inverter variables
JJ Excellent tool for fault diagnosis in remote locations
JJ Simulates an oscilloscope
JJ Included in SuperDrive G2 software

24 Automation & Motors - European Product Lines

 www.weg.net

Free Software
Dimensioning

JJ  Soft-starters (SDW) and servo drives (DSW)

JJ Help with sizing and specifications
JJ Various application options
JJ Different starting conditions
JJ List of basic starting parameters

WPS Programming Software

JJ Ladder programming according to IEC 61131-3

JJ Integrated tool, same software, enabling screen edition of the HMI,
PLC and configuration of the CANopen network
JJ On-line logic monitoring and charts, recipe edition, SD card file
handling

Return On Investment with Variable Speed Drive

JJ Easy to use
JJ Pumps and fan applications
JJ Easy visualization of electrical energy savings
JJ Estimated return on investment

Available on website www.weg.net

Automation & Motors - European Product Lines 25

 www.weg.net

Distribution and Command Electric Systems

MTW Medium Voltage Switchgear

JJ Voltage class: 7.2 to 36 kV

JJ Short-circuit current: 25 / 31.5 / 40 / 50 kA
JJ Substation of utility companies
JJ Main disconnection and protection of manufacturing plants and
industrial installations
JJ Pumping stations
JJ Railroad systems
JJ Thermal and hydroelectric plants for power generation
JJ Start of medium-voltage motors
JJ Unitary substations
JJ Load switch board panels
JJ Motor control center
JJ Internal arc resistant - Classification IAC BFALR/AFLR

CCW Compact Medium Voltage Switching and Protection Set Up to

20 kA / 24 kV

JJ  ompactness, operating safety and modularity are outstanding

C
characteristics of the Medium Voltage Controlgear and Switchgear
of the CCW series
JJ These arc proof and air insulated switchgear comply with
NBR IEC 62271-200 and the requirements of NR10
JJ Its standardized columns provide versatility so as to economically
fulfill a great variety of configurations, topologies and requirements
of utility companies
JJ Modules with circuit breakers: rated current of 630 A
JJ Modules with switch-disconnectors: rated current of 630 A
JJ Internal arc resistant - Classification AFL/AFLR

LCW Low Voltage Panels

JJ Lower risk of accidents with operators

JJ Fast and easy maintenance
JJ Modular system enables easy expansion
JJ Easy rear access to the electric cable terminals
JJ Greater reliability on the protection system
JJ Direct protection: through the tripping devices incorporated to the
circuit breakers
JJ Secondary protection: through the secondary protection relays and
CTs (IECs), which can be connected to network (Modbus, DeviceNet,
Profibus, IEC 61850)
JJ Totally tested - TTA/PTTA (according to IEC 60439-1)
JJ Internal arc resistant
JJ Rated currents:
JJ Main busbar up to 6,000 A

JJ Vertical busbar up to 4,000 A

JJ Constructive form: 3b and 4b

26 Automation & Motors - European Product Lines

 www.weg.net

MCC Low Voltage Motor Control Centers

JJ User safety during operation, supervision and maintenance

JJ Installation in centralized locations to simplify operation and
maintenance
JJ Versatility to command and protect a great number of motors
JJ Extremely compact design that enables maximum use of space
JJ Fast and easy maintenance, especially because of the extraction of
the drawers and their interchangeability
JJ Modular system enables easy expansion
JJ High safety, because it allows the execution of maintenance and
other services in a certain device without de-energizing other
equipment
JJ Worldwide standardized Profibus-DP (non-proprietary network) or
DeviceNet network
JJ Communication with other PLCs in open protocol network
JJ Electric arc resistant: on request
JJ Short-circuit current: 50/65/80 kA
JJ Main busbar up to 5,000 A (other on request)
JJ Vertical busbar: 630, 800, 1,000 and 1,200 A
JJ Constructive form: 2, 3 and 4b

Electrical Houses E-Houses

JJ Reduction of the lead time to assemble the substation

JJ Greater control on the equipment testing process at the plant and
single responsibility/guarantee on the process with a single supplier
JJ Flexibility for the installations and possibility of relocation without
adding major costs
JJ Convenience for installation in the field (reduced civil works)
JJ Engineering consolidated in a single machine
JJ Easy customization to meet all customer needs

Automation & Motors - European Product Lines 27

 www.weg.net

Industrial Motors

W22 General Purpose Low Voltage Motors

W22 General Purpose motors are designed to Standard Features IE4 Super Premium
provide not only significantly lower energy JJ Output: 3 to 355 kW

consumption, but lower noise and JJ Number of poles: 2, 4 and 6

vibration levels, higher reliability, easier JJ Frequency: 50 Hz

maintenance and lower total cost of ownership JJ Voltage: 400/690 V

A motor line that addresses the concepts of JJ Frames: 132S to 355A/B

energy efficiency, performance and productivity, JJ Colour: RAL 6002 - green

generating maximum benefit to the customer.

Standard Features IE3 Premium
JJ Output: 0,12 to 500 kW

JJ Number of poles: 2, 4, 6 and 8

JJ Frequency: 50 Hz

JJ Voltage: 220-240/380-415 V (up to 100L)

380-415/660 V (from 112M and up)

JJ Frames: 63 to 355A/B

JJ Colour: RAL 5009 - Blue

Applications
Pumps, compressors, fans, crushers, conveyors, mills, centrifugal
machines, presses, elevators, packaging equipment, grinders, etc.

Features & Bennefits

JJ Counts on all the innovative features of the W22 General Purpose

motors platform
JJ Same output x frame ratio when compared to conventional
induction motors - Totally interchangeable with existing induction
motors
JJ WISE® Insulation System - Increases stator electrical strength and
allows the motor operation by Variable Speed Drive, without
damage by voltage peaks1)

1) For more information about Frequency Inverter operation, please see page 23.

28 Automation & Motors - European Product Lines

 www.weg.net

W21 Aluminium Multimounting Motors

WEG Aluminium frame motors with Standard Features

removable feet were specially designed to JJ Output: 0.12 kW to 37 kW

meet market requirements in reference to JJ Number of poles: 2, 4, 6 and 8

mounting flexibility since they allow all JJ Frequency: 50 Hz

mounting positions. The foot mounting JJ 

Voltage: 220-240/380-415 V (up to 100 L)
system offers great flexibility and allows 380-415/660 V (from 112M and up)
changing of the mounting configuration JJ Frames: 63 to 200L

without requiring any additional machining JJ Colour: RAL 5009 - blue

process or modification to the motor feet.

Motor terminal boxes can be rotated at 90 Versions Available
degrees allowing motor leads to be JJ Standard Efficiency - IE1

connected at any motor side. Besides that JJ High Efficiency - IE2

these motors are fully interchangeable with JJ Premium Efficiency - IE3

existing cast iron frame motors. Reduced

stock is needed as only one motor is Applications
required for all mounting positions. Pumps, compressors, air conditioning systems, fans, cranes,
conveyors, machine tools, winding machines, drawing machines,
presses, hoists, cranes, elevators, looms, grinders, injectors,
extruders, cooling towers, packaging machines, etc.

Features & Bennefits

JJ Multimounting - Flexible and easy to change mounting

configurations without requiring machining operations or additional

changes to the motor feet.
JJ Aluminium frame provides high protection to the enclosures

offering better heat dissipation.

JJ Definite purpose derived lines - W21 Aluminum Multimounting

motors line counts on, besides the General Purpose line, several
definite purpose derived lines, such as Brake Motors, Single-Phase
Motors and Fan & Exhaust Motors (TEAO).
JJ Extended range - The introduction of the 160, 180 and 200 frames

allow the W21 aluminum multimounting line to offer rated outputs

up to 37 kW, enabling the line to cover even more applications.
JJ WISE® Insulation System - Increases stator electrical strength and

allows the motor operation by Variable Speed Drive, without

damage by voltage peaks1)

1) For more information about Frequency Inverter operation, please see page
23.

Automation & Motors - European Product Lines 29

 www.weg.net

Industrial Motors

W22 Magnet Permanent Magnet Motor

The motor with the greatest efficiency and Standard Features

savings on the market. The rotor with JJ Output: 7,5 kW to 315 kW (IE4 Efficiency)

permanent magnets guarantees high 3 kW to 160 kW (IE5 Efficiency)

performance, making it possible to draw more JJ Speed range: 180 to 3600 rpm

power per frame, reducing installation space JJ Frequency: 50 Hz

and noise, in addition to guaranteeing efficiency JJ Voltage: 400 V

levels greater than IE2, IE3 and IE4 motors JJ Frames: 132S to 315S/M

defined by standards. The W22 Magnet is JJ Colour: 091A.3145 - gray

driven by a WEG Variable Speed Drive and

offers constant torque in a wide speed range, Applications
guaranteeing operation at low speeds, with no Compressors, elevators, pumps, fans, exhausters, conveyors,
need of a forced ventilation kit. electrical vehicles, textile industry machines and other applications
where speed variation, high efficiency, low noise levels and reduced
volume are necessary.

Features & Bennefits

JJ Super and Ultra Premium Efficiency Levels - The motor efficiency

meets the IE4 or the impending IE5 levels of the IEC 60034-30-1,
offering energy savings and reduction in CO2 emissions.
JJ Rotor fitted with permanent magnets - Motor extended lifetime,

higher output / frame size ratio, higher efficiency, higher power

factor and reduced bearing and overall motor temperature.
JJ Synchronous operation - Easy speed synchronization with

multiple motors fed by the same variable frequency inverter.

JJ Wide speed range with constant torque - Ensures operation at

lower speeds with the same performance, without requiring a

forced ventilation kit, demanding less floor space for motor and
MCC installation
JJ WISE® Insulation System - Increases stator electrical strength

and allows the motor operation by Variable Speed Drive, without

damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

30 Automation & Motors - European Product Lines

 www.weg.net

W22 High Voltage Motors

With technical know-how in the manufacture Standard Features

of compact pre-formed coils and access to JJ Output: 90 kW to 400 kW

the latest electrical design optimization JJ Number of poles: 2, 4, 6 and 8

software, WEG has developed the W22 High JJ Frequency: 50 Hz

Voltage general purpose motors line. JJ Voltage: 1.2 to 6.6 kV

The line has all of the innovative features JJ Frames: 315L, 355M/L and 355A/B

incorporated in to the W22 Low Voltage JJ Colour: RAL 5009 - blue

motors range and represent an excellent

cost-benefit solution for general purpose Applications
applications requiring High Voltage Pumps, compressors, fans, crushers, conveyors, mills,
machines. centrifugal machines, presses, elevators, packaging equipment,
grinders, etc.

Features & Bennefits

JJ Compact construction - One of the most compact High

Voltage machines available on the market.

JJ W22 Platform - Counts on all the innovative features of the

W22 General Purpose Motors Platform.

JJ Accessories terminal box - Placed in the top of the frame close

to the fan cover, provides easy and safe connection for

acessories separated from main terminals, thus avoiding signal
interference.

Automation & Motors - European Product Lines 31

 www.weg.net

Industrial Motors

W40 Open Induction Motors - Low and High Voltage

The W40 motor is a general purpose line Standard Features - Low Voltage
JJ Output: 11 kW to 800 kW
designed for environments where dirt and
JJ Number of poles: 2, 4 and 6
moisture are minimal. The W40 cast iron frame
JJ Frequency: 50 Hz
is designed to provide maximum ventilation and
JJ Voltage: 380-415 / 660 V (for frames 160M to 315G/F)
heat dissipation, offering low vibration levels,
high mechanical stiffness and durability. 400 V (for IE3 motors, frames 355J/H and 400J/H)
JJ Frames: 160M to 400J/H

JJ Colour: R
 AL 5009 - blue

Standard Features - High Voltage

JJ Output: 220 kW to 1500 kW

JJ Number of poles: 2 and 4

JJ Frequency: 50 Hz

JJ Voltage: 1,2 to 5,0 kV

JJ Frames: 280L to 450K/J

JJ Colour: R
 AL 5009 - blue

Applications
Pumps, compressors, fans, exhausters, kneader and mixer
machines, presses, industrial machines, conveyors, blowers, cranes,
chillers, packaging equipment and other sheltered and protected
industrial applications.

Features & Bennefits

JJ High performance - Due to its open enclosure, the motor design

features higher rated output levels in comparison with totally

enclosed motors, resulting in the most cost-effective option for
the driven equipment.
JJ Fire pump certification available - The ODP line is UL certified for

Fire Pump applications with the ambient temperature up to 50 °C.

JJ Compact construction - One of the most compact High Voltage

machines available on the market interference.

JJ Additional terminal box for accessories fitted with two spare

magazines (HV Motors) - Thermal detectors and space heaters

leads are connected in different terminal boxes, avoiding any
possible signal interference and providing easy and safe
connections.
JJ WISE® Insulation System (LV Motors) - Increases stator electrical

strength and allows the motor operation by Variable Speed Drive,

without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see page 23.

32 Automation & Motors - European Product Lines

 www.weg.net

W50 and HGF Low and High Voltage Motors

These motors are designed to address the Standard Features HGF Standard Features W50
most demanding technological standards JJ Output: 75 to 2500 kW JJ Output: 75 kW to 1000 kW

available on the market, using modern JJ Number of poles: 2 to 12 JJ Number of poles: 2 to 12

computer software for mechanical, electrical JJ Frequency: 50 Hz JJ Frequency: 50 Hz

and thermal analysis evidenced by performing JJ Voltage: 380 to 6,6 kV JJ Voltage: 380 to 6,6 kV

rigid tests and checks. JJ Frames: 315 to 630 JJ Frames: 315 to 450

The result of this innovative development is a JJ Colour: RAL 5009 (blue) JJ Colour: RAL 5009 (blue)

flexible product, in compliance with the

requirements of international standards Versions Available
and fully aligned with world market trends. JJ Standard

JJ Non-Sparking (Ex nA)

Applications
Pumps, compressors, fans, crushers, conveyors, mills, centrifugal
machines, presses, etc.

Features & Bennefits

JJ Frame design aimed at best equation between mechanical

rigidity and thermal dissipation possible for enclosures, thereby

reducing motor vibration and increasing lifetime.
JJ The fan cover was designed to direct airflow over the entire frame

with minimal recirculation inside the motor, allowing maximum

W50 heat exchange and resulting in a cooler motor.
JJ The cooling system allows for sound pressure reductions up to 7 dB(A).

JJ Special painting plan for aggressive ambients - Higher resistance

and painting durability, protecting the enclosure against corrosion

and abrasion.
JJ Pt-100 thermal detectors - Thermal resistances (Pt-100)

HGF installed in the windings and bearings provide precise and

constant temperature control to quickly detect any abnormal
operating condition.
JJ Sleeve bearings available as optional features - Sleeve bearings

require less maintenance due to the fact that the lubrication

intervals are up to three times longer than the lubrication intervals
of conventional bearings, and specially because they present a
lifetime similar to, or longer than that of the motor itself.
JJ Thermal detectors and space heaters leads are connected in

separate terminal boxes avoiding any possible signal interference

and providing easy and safe connections.
JJ Motor design adaptable to the most varied applications and

specific needs.

Automation & Motors - European Product Lines 33

 www.weg.net

Industrial Motors

Fan and Exhaust Motors Fan and Exhaust Motors

Suitable for the most demanding specifications Standard Features

of ventilation OEM’s, the Fan and Exhaust line JJ Output: 0.12 kW to 500 kW

delivers standard and high output designs in JJ Number of poles: 2 to 12

light and compact frame sizes particularly suited JJ Frequency: 50 Hz

to axial fan applications. JJ 

Voltage: 220-240/380-415 V (up to 100 L)
380-415/660 V (from 112M and up)
JJ 
Frames: 63 to 355A/B (for cast iron frames)
63 to 132M (for aluminum frames)
JJ Cooling method: TEAO or TEFC

JJ Colour: RAL 5009 - blue

Versions Available
JJ Premium Efficiency - IE3

JJ High efficiency - IE2

JJ Standard efficiency - IE1

JJ Multi speed motors (Dahlander, Double Winding, etc.)

JJ Cast iron or aluminium enclosures

Applications
Fan and exhausters for: tunnels, metros, subways, shopping
centres, car parks, supermarkets, etc.

Features & Bennefits

JJ Mounting Flexibility - Fan and Exhaust motors can be supplied

with the following features: foot, flange or pad mounting.

Besides the mounting configurations the motor can be also
supplied with terminal box and terminal block or with loose
leads allowing remote assembly of the terminal box
JJ Premium Efficiency motor - IE3 efficiency level available across

the range.
JJ WISE® Insulation System (LV Motors) - Increases stator electrical

strength and allows the motor operation by Variable Speed

Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

34 Automation & Motors - European Product Lines

 www.weg.net

Smoke Extraction Motors

Smoke Extraction Motors Smoke Extraction Motors

Assuring safety in commercial and industrial Standard Features

JJ Output: 0.18 kW to 500 kW
facilities is one of the main concerns of
JJ Number of poles: 2, 4, 6 and 8
developers and owners during the design
JJ Frequency: 50 Hz
of shopping centres, hotels, theatres, cinemas,
JJ Frames: 80 to 355A/B
tunnels, car parks and other locations where JJ Voltage: 220-240/380-415 V (up to 100 L)
large concentrations of people
380-415/660 V (from 112M and up)
are present. JJ Colour: RAL 9006 - aluminium
Smoke Extraction motors are suitable for both
general ventilation and, under emergency Versions Available
conditions, at high temperatures to JJ 
TEFC (Totally Enclosed Fan Cooled) or TEAO (Totally Enclosed
prevent or delay the spread of fires, assist Air Over)
firefighting operations, reduce smoke / heat JJ Premium efficiency - IE3

damage and keep emergency exits and JJ High efficiency - IE2

access routes free from smoke. JJ 10 and 12 poles

JJ Multi speed motors (Dahlander, Double Winding, etc.)

JJ 
F200 (200 °C/2 hrs), F250 (250 °C/2 hrs), F300 (300 °C/2 hrs or
300 °C/1 h) and F400 (400 °C/2 hrs).

Applications
Fan and exhausters for: tunnels and metros, shopping centres,
hotels, theatres, cinemas, enclosed or underground car parks and
other installations where large concentrations of people are present.

Features & Bennefits

JJ Smoke Extraction motors can be supplied with the following

features: foot, flange or pad mounting.

JJ Besides the mounting configurations the motor can be also

supplied with terminal box and terminal block or with loose

leads allowing remote assembly of the terminal box.
JJ W22 Platform - Offers on all the innovative features of the W22

General Purpose Motors platform (for foot or flange mounted).

JJ Components carefully designed to withstand the operation in

extreme temperature conditions.

JJ Extensively tested and approved according to EN 12101-3 -

Safety and reliability.

JJ WISE® Insulation System (LV Motors) - Increases stator electrical

strength and allows the motor operation by Variable Speed

Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

Automation & Motors - European Product Lines 35

 www.weg.net

Roller Table Motors

Roller Table Motors Roller Table Motors

Severe operating conditions require more robust Standard Features

motors. The Roller Table motor’s frame is fitted JJ Output: 1,1 kW to 260 kW

with radial fins that prevent residue JJ Number of poles: 4, 6, 8, 10 and 12

accumulation on the frame surface. They are JJ Frequency: 50 Hz

also fitted with an advanced sealing system, JJ Frames: 132M to 400

high protection against corrosion and high JJ Voltage: 400 V

mechanical strength, thus requiring low JJ Colour: Ral 6002 - green

maintenance and providing high durability and

productivity. Versions Available
JJ Premium Efficiency - IE3

Applications
Roller tables and laminating machines for the steel industry.

Features & Bennefits

JJ Exceeds the IE3 efficiency levels specified in the IEC 60034-30-1

to provide significant energy savings and fast return on

investment.
JJ Radial/circular fins - Prevent residue accumulation on motor frame.

JJ W3Seal® sealing system and IPW66 degree of protection

JJ Sealing at cable inlet and sealing between endshield and frame

JJ Shaft, bolts and nameplate are made of stainless steel

JJ Internal epoxy anti-corrosion painting

JJ Painting plan for aggressive environments

JJ WISE® Insulation System (LV Motors) - Increases stator electrical

strength and allows the motor operation by Variable Speed

Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

36 Automation & Motors - European Product Lines

 www.weg.net

W22 Brake Motors Brake Motors

High-performance companies require Standard Features

equipment tailored to their needs. JJ Output: 0,12 to 75 kW

WEG brake motors are suitable for equipment JJ Number of poles: 2 to 12

where rapid and safe stopping and accurate JJ Frames: 63 to 250S/M

load positioning are required. JJ Frequency: 50 Hz

WEG braking solutions allow synergy in the JJ Voltage: 220-240/380-415 V (up to 100 L)

production process, providing agility and 380-415/660 V (from 112M and up)
safety. JJ Colour: Premium Efficiency - IE3: RAL 6002 - Green

High Efficiency - IE2: RAL 5009 - Blue

Standard Efficiency - IE1: RAL 5009 - Blue

Versions Available
JJ Premium Efficiency - IE3

JJ High Efficiency - IE2

JJ Standard Efficiency - IE1

JJ Cast Iron or Aluminium Enclosures

Applications
These motors are ideally suited for use on machinery requiring
fast stops for safety, control or accurate positioning, such as:
packing equipment, conveyors, washing and bottling machines,
overhead cranes, elevators, printing machines, automatic
gates, woodworking machinery, etc.

Features & Bennefits

JJ Ensures fast and safe stopping and accurate load positioning,

whilst requiring low maintenance.

JJ Possibility to release the motor shaft during emergencies or power

outages.
JJ Aluminium frame available - Lower weight with the same

reliability.
JJ WISE® Insulation System (LV Motors) - Increases stator

electrical strength and allows the motor operation by Variable

Speed Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

Automation & Motors - European Product Lines 37

 www.weg.net

Industrial Motors

W22Xd Flameproof Motors

Incorporating the same innovative concepts of the Standard Features

W22 General Purpose Motors, the W22X Line is JJ Output: 0,12 to 370 kW

an evolution on the market of classified area JJ Number of poles: 2, 4, 6 and 8

products offering high efficiency levels, energy JJ Frequency: 50 Hz

saving, low operational costs, extended lifetime, JJ Voltage: High and Premium Efficiency:

low maintenance and assured safety. 220-240/380-415 V (up to 100L)

380-415/660-690 V (from 112M and up)
Super Premium Efficiency: 400/690 V (All frames)
JJ Frames: 71 to 355M/L

JJ Colour:

High and Premium Efficiency - IE2 and IE3: RAL 5009 - blue
Super Premium Efficiency - IE4: RAL 6002 - green

Version Available
JJ Premium efficiency - IE3

JJ High efficiency - IE2

JJ Multi speed motors (Dahlander, Double Winding, etc.)

JJ 10 and 12 poles

Applications
Pumps, compressors, fans, blowers, conveyors and other sever
duty applications in explosive atmospheres classifi ed as Zones 1
and 2, gas groups IIA, IIB or IIC.

Features & Bennefits

JJ Incorporates several innovative features of the W22 General

Purpose Motors platform

JJ Whilst EU Regulations do not apply to motors installed in potentially

explosive atmospheres, since the introduction of the ATEX Directive

there has been an increase in demand for these products.
JJ Zone 21 and 22 certified

JJ Offers users a wide range of certified accessories fulfilling a

variety of specific customer requirements without losing the

primary focus on the safety of the application
JJ WISE® Insulation System (LV Motors) - Increases stator electrical

strength and allows the motor operation by Variable Speed

Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

38 Automation & Motors - European Product Lines

 www.weg.net

Flameproof Motors with Brake Flameproof Motors with Brake

The installation of electric motors where Standard Features

flammable products are continuously handled, JJ Output: 2.2 to 18.5 kW

processed or stored must comply with the JJ Number of poles: 2, 4, 6 and 8

most demanding safety standards in order to JJ Frequency: 50 Hz

guarantee protection of people, machines and JJ Voltage: 380-415/660 V

the environment. JJ Frames: 132 S to 160 L

Following the highest safety standards, these JJ Colour: RAL 5009 - blue

WEG flameproof motors integrate high

performance brakes which provide an effective Versions Available
solution for equipment requiring fast stopping JJ High efficiency - IE2

for safety, control or accurate positioning in JJ Standard efficiency - IE1

Zone 1 or Zone 2 hazardous areas.

Applications
Cranes, winches, conveyors and other severe duty applications in
potentially explosive atmospheres classified as Zones 1 and
2, gas groups IIA or IIB.

Features & Bennefits

JJ High performance braking system - Ensures fast and safe

stopping and accurate load positioning, whilst requiring low

maintenance
JJ Manual brake release - Possibility to release the motor shaft during

emergencies or power outages

JJ Modern flame retention system with robust frame, endshields

and T-box - Avoid flame propagation from within the motor to

the external side, guaranteeing protection of life, machines
and the environment
JJ W3Seal® sealing system - Degree of protection up to IPW66

to protect against the ingress of contaminants inside the

motor frame
JJ Painting Plans for Severe Environments - Special painting

plans up to C5/I or C5/M for arduous environments, sheltered

or non-sheltered
JJ Motor suitable to operate in hazardous locations classified as

Zones 1 and 2
JJ WISE® Insulation System (LV Motors) - Increases stator

electrical strength and allows the motor operation by Variable

Speed Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see page 23.

Automation & Motors - European Product Lines 39

 www.weg.net

Industrial Motors

W22Xtb Dust Ignition Proof Motors

W22Xtb motors are specially designed to Standard Features

maximise safety and reliability on installations in JJ Output: 0.12 to 450 kW

potentially explosive dust JJ Number of poles: 2 to 12

atmospheres classified as Zone 21 where JJ Frequency: 50 Hz

conductive dusts either in the form of clouds JJ Voltage: 220-240/380-415 V (up to 100 L)

(free suspension) or layers (up to 5mm 380-415/660 V (from 112 M and up)
thick) may be present. JJ Frames: 63 to 355A/B

JJ Colour: RAL 5009 - blue

Version Available
JJ Premium efficiency - IE3

JJ High efficiency - IE2

Applications
Sugar refineries, breweries, cement plants, saw mills, textiles,
pharmaceutical, chemical, agricultural process industries
and other applications in potentially explosive atmospheres
classified as Zone 21 or Zone 22.

Features & Bennefits

JJ Reduced surface temperature - Safety. Prevents risk of ignition of

combustible dusts or fibres in contact with the motor

JJ Conductive fan material - Safety. Avoids sparks which could cause

the ignition of combustible material present in the environment

JJ Degree of Protection IP66 - Restricts the ingress of

contaminants inside the motor frame.

JJ Fitted with PTC’s to provide protection of the motor under

abnormal operating conditions, and safeguarding the surface

temperature limit of the equipment.
JJ WISE® Insulation System (LV Motors) - Increases stator electrical

strength and allows the motor operation by Variable Speed

Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

40 Automation & Motors - European Product Lines

 www.weg.net

W22XnCD Non-Sparking Motors

The installation of electric motors where a Standard Features

flammable mixture is unlikely to occur present JJ Output: 0.12 kW to 450 kW

but may represent risks, must comply JJ Number of poles: 2 up to 12

with the most demanding safety standards for JJ Frequency: 50 Hz

protection of people, machines and the JJ Voltage: 220-240/380-415 V (up to 100 L)

environment. Following the highest safety 380-415/660 V (from 112M and up)
standards WEG Ex nA/Ex tc motors are JJ Frames: 63 to 355A/B

adaptable to various applications allowing your JJ Colour: RAL 5009 - blue

company flexibility during installation, easy

operation, low maintenance cost and safety. Version Available
JJ Premium efficiency - IE3

JJ High efficiency - IE2

Applications
Pumps, compressors, fans, mills, presses, winches,
woodworking machinery, grinders, looms, packaging machines,
conveyors and other applications in potentially explosive
atmospheres classified as Zone 2 (gas) or Zone 22 (dust).

Features & Bennefits

JJ Dual certification for Zone 2 (gas) and Zone 22 (non-conductive dusts)

JJ Safety. Two sets of PTC’s with tripping temperatures of 155°C for

gas, and 140°C for dust, to provide protection of the motor under
abnormal operating conditions, and safeguarding the surface
temperature limit of the equipment.
JJ IE3 efficiency level available for all motors in the range

JJ WISE® Insulation System (LV Motors) - Increases stator

electrical strength and allows the motor operation by Variable

Speed Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

Automation & Motors - European Product Lines 41

 www.weg.net

Industrial Motors

Water Cooled Motors Water Cooled Motors

WEG Water Cooled motors are used in a variety Standard Features

of applications and are mainly utilised for JJ Output: 18.5 kW to 450 kW

installations where compact dimensions, low JJ Number of poles: 2, 4, 6 and 8

noise levels and ease of access for maintenance JJ Frequency: 50 Hz

are required. JJ Voltage: up to 660 V

JJ Frames: 180L to 355M/L

JJ Colour: RAL 5009 - blue

Version Available
JJ Premium efficiency - IE3

JJ High efficiency - IE2

Applications
Compressors, injection machines, water treatment plants, textile
industries, mining equipment, vacuum pumps, power train and
marine equipment.

Features & Bennefits

JJ Cooling method IC71W - Water jacketed system offers excellent

heat exchange, increasing bearing and motor lifetime.

JJ Higher output x frame ratio - Demands less space on plant,

facilitating easier access for maintenance operations.

JJ Thermal resistances Pt-100 supplied in windings and bearings

provide precise and constant temperature monitoring and a

rapid detection of abnormal operation conditions.
JJ WISE® Insulation System (LV Motors) - Increases stator electrical

strength and allows the motor operation by Variable Speed

Drive, without damage by voltage peaks1).

1) For more information about Frequency Inverter operation, please see

page 23.

42 Automation & Motors - European Product Lines

 www.weg.net

Single-Phase Motors Single-Phase Motors

Flexible and Compact Motors, designed with Standard Features

highest technologically available tools and JJ Output: 0.12 kW to 9,2 kW

suitable for a variety of domestic, rural JJ Number of poles: 2 and 4

and industrial applications. JJ Frequency: 50 Hz

JJ Voltage: 230 V

JJ Frames: 63 to 132M/L

JJ Colour: RAL 5009 - blue

Versions Available
JJ Cast iron or aluminum enclosures

JJ Capacitor Start / Capacitor Run with start and run capacitors

JJ 230/460 V

Applications
Fans and blowers, grain driers, centrifugal pumps,
compressors, high pressure washers, conveyors / materials
handling, silo unloaders and augers, grinding machines etc.

Features & Bennefits

JJ High starting torques for severe applications.

JJ Suitable for domestic and rural power supply conditions.

JJ Adaptable design suitable for a variety of applications and

needs.

Automation & Motors - European Product Lines 43

 www.weg.net

Applying Motors with Frequency Drives

The stator windings of WEG motors are wound with class “F” insulation (class H optional) and are
suitable for either DOL starting or via variable speed drive. They incorporate the WEG exclusive
insulation system - WISE® (WEG Insulation System Evolution) - which ensures superior electrical
insulation characteristics. The stator winding is suitable for variable speed drive application, taking into
account the limits shown in the next table:

44 Automation & Motors - European Product Lines

 www.weg.net

Voltage spikes dV/dt1)

Motor rated voltage Rise time1) Time between pulses
At motor terminals (phase-phase)
Vrated < 460 V ≤1,600 V ≤5,200 V/μs
460 V ≤ rated < 575 V ≤2,000 V ≤6,500 V/μs ≥ 0.1 μs ≥ 6 μs
575 V ≤ rated ≤ 1000 V ≤2,400 V ≤7,800 V/μs

1) dV/dt and rise time definition according to NEMA Std. MG1 - part 30.

Notes: 1 - In order to protect the motor insulation system, the maximum recommended switching frequency is 5 kHz.
2 - If one or more of the above conditions is not met, a filter (load reactor or dV/dt filter) must be installed at the output of the VSD.
3 - General purpose motors with rated voltage greater than 575 V, which at the time of purchase did not have any indication of operation with VSD, are
able to withstand the electrical limits set in the table above for rated voltage up to 575 V. If such conditions are not fully satisfied, output filters must be
used.
4 - General purpose motors of the dual voltage type, for example 400/690 V, which at the time of purchase did not have any indication of operation with
VSD, are able to be driven by a VSD in the higher voltage only if the limits set in the table above for rated voltage up to 460 V are fully attended in the
application. Otherwise, a load reactor or a dV/dt filter must be installed in the VSD output.
5 - From frame size 315S/M upwards additional measures should be taken in order to avoid detrimental bearing currents. This can be accomplished by
means of the use of an insulated bearing or an insulated hub endshield at the non drive end side and a shaft grounding brush mounted on the drive
endshield.
6 - Motors operating with frequency inverters may present a higher temperature rise than when operating under sinusoidal supply due to the combined
effects of the loss increase resulting from the PWM harmonics and the reduction in ventilation experienced by self-ventilated motors when operating at low
frequencies. Under these conditions, please contact WEG.
7 - For the application of motors for potentially explosive atmosphere with variable frequency inverters, please contact WEG.

Automation & Motors - European Product Lines 45

 www.weg.net

Global presence is essential,

as much as understanding your needs.

Global Presence
With more than 30.000 employees worldwide, WEG is one of the largest electric motors, electronic equipments and systems
manufacturers. We are constantly expanding our portfolio of products and services with expertise and market knowledge. We
create integrated and customized solutions ranging from innovative products to complete after-sales service.

WEG’s know-how guarantees our Automation & Motors is the right choice for your application and business, assuring safety,
efficiency and reliability.

Availability is to have a global support network

Partnership is to create solutions that suits your needs

Competitive edge is to unite technology and inovation

46 Automation & Motors - European Product Lines

 www.weg.net

Know More
High performance and reliable products to
improve your production process.

Excelence is to provide a whole solution in industrial automation that improves our customers
productivity.

Visit: www.weg.net youtube.com/wegvideos

Automation & Motors - European Product Lines 47

WEG Worldwide Operations

ARGENTINA COLOMBIA JAPAN SPAIN

San Francisco - Cordoba San Cayetano - Bogota Yokohama - Kanagawa Coslada - Madrid
Phone: +54 3564 421484 Phone: +57 1 4160166 Phone: +81 45 5503030 Phone: +34 91 6553008
[email protected] [email protected] [email protected] [email protected]

Cordoba - Cordoba ECUADOR MALAYSIA SINGAPORE

Phone: +54 351 4641366 El Batan - Quito Shah Alam - Selangor Singapore
[email protected] Phone: +593 2 5144339 Phone: +60 3 78591626 Phone: +65 68589081
[email protected] [email protected] [email protected]
Buenos Aires
Phone: +54 11 42998000 FRANCE MEXICO Singapore
[email protected] Saint-Quentin-Fallavier - Isère Huehuetoca - Mexico Phone: +65 68622220
Phone: +33 4 74991135 Phone: +52 55 53214275 [email protected]
AUSTRALIA [email protected] [email protected]
Scoresby - Victoria SCANDINAVIA
Phone: +61 3 97654600 GERMANY Tizayuca - Hidalgo Mölnlycke - Sweden
[email protected] Türnich - Kerpen Phone: +52 77 97963790 Phone: +46 31 888000
Phone: +49 2237 92910 [email protected]
AUSTRIA [email protected] NETHERLANDS
Markt Piesting - Wiener Oldenzaal - Overijssel UK
Neustadt-Land Balingen - Baden-Württemberg Phone: +31 541 571080 Redditch - Worcestershire
Phone: +43 2633 4040 Phone: +49 7433 90410 [email protected] Phone: +44 1527 513800
[email protected] [email protected] [email protected]
PERU
BELGIUM Homberg (Efze) - Hesse La Victoria - Lima UNITED ARAB EMIRATES
Nivelles - Belgium Phone: +49 5681 99520 Phone: +51 1 2097600 Jebel Ali - Dubai
Phone: +32 67 888420 [email protected] [email protected] Phone: +971 4 8130800
[email protected] [email protected]
GHANA PORTUGAL
BRAZIL Accra Maia - Porto USA
Jaraguá do Sul - Santa Catarina Phone: +233 30 2766490 Phone: +351 22 9477700 Duluth - Georgia
Phone: +55 47 32764000 [email protected] [email protected] Phone: +1 678 2492000
[email protected] [email protected]
INDIA RUSSIA and CIS
CHILE Bangalore - Karnataka Saint Petersburg Minneapolis - Minnesota
Santiago Phone: +91 80 41282007 Phone: +7 812 363 2172 Phone: +1 612 3788000
Phone: +56 2 27848900 [email protected] [email protected]
[email protected] VENEZUELA
Hosur - Tamil Nadu SOUTH AFRICA Valencia - Carabobo
CHINA Phone: +91 4344 301577 Johannesburg Phone: +58 241 8210582
Nantong - Jiangsu [email protected] Phone: +27 11 7236000 [email protected]
Phone: +86 513 85989333 [email protected]
[email protected] ITALY
Cinisello Balsamo - Milano
Changzhou – Jiangsu Phone: +39 2 61293535
Phone: +86 519 88067692 [email protected]
[email protected]
The values shown are subject to change without prior notice.

For those countries where there is not a WEG own operation, find our local distributor at www.weg.net.
Cod: 50044005 | Rev: 04 | Date (m/y): 08/2017

WEG Group - Automation Business Unit

Jaraguá do Sul - SC - Brazil
Phone: +55 47 3276 4000
[email protected]
www.weg.net