Scribd
Upload
16 views

Modern Control System Worksheet

Uploaded by

ermias.seleshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

Modern Control System Worksheet

Uploaded by

ermias.seleshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

WORKSHEET

1. Consider the system descried by


−4 −1 1
𝑥̇ = [ ]𝑥 + [ ]𝑢
3 −1 1
𝑦 = [1 0]𝑥
Obtain the transfer function of the system

2. Consider the following transfer function system


𝑦(𝑠) 𝑠+6
= 2
𝑢(𝑠) 𝑠 + 5𝑠 + 6
Obtain the state-space representation of this system in
a. Controllable canonical form
b. Diagonal canonical form
3. Consider the network of Figure-1.1 with initial conditions 𝑖𝑙 (0) = 1 and 𝑣𝑐 (0) = 0. The
input, the state variables, and the output of the network are shown in Figure-1.2.
Determine

a. A state space description


b. The state transition matrix using
c. The solution of zero input response
d. The state transition equation
e. The output of the system

Figire-1.1 RLC network

Figure-1.2 the input, the state variables, and the output of the network.
4. For the following state space representation of the system
0 1 0 0
𝑥̇ = [1 −3 2 ] 𝑥 + [ 1 ] 𝑢
0 𝛽 −1 −1
𝑦 = [1 0 0]𝑥
Examine the controllability and observability of the system.
5. For the following state space representation of the system
0 1 0
𝑥̇ = [ ]𝑥 + [ ]𝑢
2 1 1
𝑦 = [1 −2]𝑥
Examine the BIBO stability, internal stability, controllability and observability of the
system
6. Consider
−1 10 −2
𝑥̇ = [ ]𝑥 + [ ]𝑢
0 1 0
𝑦 = [−2 −3]𝑥 − 2𝑢
Is it BIBO stable?
Is it internally stable?
7. Consider a system, where
0 1 0
𝐴= [ ] and 𝐵 = [ ]
−1 0 1
The closed-loop system has eigenvalues -1 and -1.5, find the control gain matrix using
a. Transformation method
b. Direct substitution method
8. Consider the system, where
1 1 0 1
𝐴 = [ 0 1 1] 𝐵 = [0] 𝐶 = [0 0 1]
−1 2 1 1
Using direct substitution method, Design a full-order state observer, such that the
observer poles are located at -1, -2

You might also like