SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Area of sfd diagram between two point is

(a) Bending moment
(b) shear force
(c) load
(d) None

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q What is bending moment at support when SSB beam subjected to point

load of 10kn at mid point, length of beam is 10m
(a) 40
(b) 25
(c) 100kn
(d) Zero

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q What is shape of Bending moment diagram when Cantilever beam

subjected to concreated moment over the length
(a) Zero line
(b) Rectangle
(c) Triangle
(d) parabola

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A ssb beam subjected to point load at center then SFD will be

(a) Rectangle
(b) tringle
(c) parabola
(d) Two opposite iso rectangle

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q At what distance in SSB beam subjected zero shear force in uvl load
(a)L/2
(b) L/3
(C ) L
(D) None

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Point of contraflexure occurs in a structure when

(a) bending moment is zero
(b) bending moment changes sign
(c) shear force is zero
(d) All of the above

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A simply supported beam of length 3 m carries a concentrated load of 15

kN at distance of 1 m from left support. The maximum bending moment in
the beam:
(a) 15 kNm
(b) 5 kNm
(c) 10 kNm
(d) 40 kNm

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A bending moment causing concavity upward will be taken as_and called

as _________ b bending moment.
(a) positive, sagging
(b) positive, hogging
(c) negative, sagging
(d) negative, hogging

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q The correct shear force diagram for the cantilever beam with uniformly
distributed load over the whole length of the beam is -

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Consider the following statements: If at section away from the ends of the
beam, M represents the bending moment, V the shear force, w the intensity
of loading and y represents the deflection of the beam at the section, then
!"
(a) !# = 𝑉
!$
(b) !# = 𝑤
!%
(c) =𝑦
!#
(d)Of these statements:

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A beam of length I, having uniform load of W kg per unit length, is

supported freely at the end. The bending moment at mid spam will be :
"&
(a) '
(&!
(b) )
(&!
(c) '
(&!
(d) *

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Determine the shape of the elastic curve between the supports B and C for
the beam as shown in the figure below

(a) A straight line (b) Elliptical (c) Parabolic (d) Circular

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Match List I with List II and select the correct answer using the codes given
below the Lists:
List-I List-II
A. Bending moment is constant 1. Point of contraflexure
B. Bending moment is maximum 2. Shear force changes sign
or minimum 3. Slope of shear force diagram
C. Bending moment is zero is
D. leading is constant zero over the portion of the
beam
A B C D 4. Shear force is zero over the
(a) 4 1 2 3 portion of the beam
(b) 3 2 1 4
(c) 4 2 1 3
(d) 3 1 2 4

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A freely supported beam at its ends carries a central concentrated load,

and maximum bending moment is M. If the same load be uniformly
distributed over the beam length, then what is the maximum bending
moment?
" "
(a)M (b) (c) (d) 2M
) +

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A point, along the length of a beam subjected to loads, where bending

moment changes its sign, is known as the point of :-
(a) Inflexion (h) Maximum stress (c) Zero shear force (d) Contra flexure

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Consider the loaded beam as shown in the figure below. Determine the
portion of the beam which is subjected to pure bending.
(a) DE (b) CD (c) BD (d) AE

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q The maximum value of bending moment in the simply supported beam

with a concentrated load P at its mid spam is_.
(a) PL/4 (b) PL/2 (c) PL (d) PL/8

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q The shearing force diagram for a beam is shown in the above figure. The
bending moment diagram is represented by which one of the following?

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Rate of change of Bending moment is equal to load

(a) Load intensity
(b) shear force
(c) bending moment
(d) None

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Area under of shear force diagram between two point is equal to load
(a) Load intensity
(b) shear force
(c) bending moment
(d) None

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

For a simply supported beam of length fl subjected to downward load of uniform intensity w, match
Q List-I with List-II and select the correct answer using the codes given below the Lists:

List-I List-II
A. Slope of shear force ,%&"
1.
+*'-.
diagram
2. w
B. Maximum shear force %&"
C. Maximum deflection 3. *
D. Magnitude of maximum %&
4. )
bending moment

A B C D
(a) 3 2 1 4
(b) 4 3 1 4
(c) 4 2 1 3
(d) 3 1 2 4
Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q The maximum value of the bending moment for a cantilever beam with a
uniformly distributed load(w) over the entire length is given as ____ .
%2!
(a) 𝑀/01 = )
%2!
(b) 𝑀/01 = *
%2!
(c) 𝑀/01 = '
%2!
(d) 𝑀/01 = 3

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q Assertion (A): In a simply supported beam carrying a concentrated load at

mid-span, both the shear force and bending moment diagrams are
triangular in nature without any change in sign.
Reason (R): When the shear force at any section of a beam is either zero or
changes sign, the bending moment at that section is maximum.
(a) Both A and R are individually true and R is the correct explanation of A
(b) Both A and R are individually true but R is NOT the correct
explanation of A
(c) A is true but R is false
(d) A is false but R is true

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A sudden increase or decrease in shear force diagram between any two

points indicates that there is
(a) No loading between the two points
(b) Point loads between the two points
(c) U.D.L. between the two points
(d) None of these

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A load 'W' acts downward at the free end of a cantilever beam of length L.
The intensity of load on the beam at distance X from the free end is:
(a) W.X/L (b) W(L-X)/L (c) WX (d) W

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A downward vertical load of 10 kN net: at a distance of 40 cm from the left

end on a 1 m long beam. This beam is simply supported at both ends. The
vertical reaction at the left end is:
(a) 0.25 kN (b)4kN (c) 6 kN (d) 5 kN

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q The maximum value of bending moment in the simply supported beam

with a concentrated load P at its mid spam is ______.
(a) PL/4 (b) PL/2 (c) PL (d) PL/8

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A simply supported beam of span length 1 carries a uniformly distributed

load of 2.0 kN/m and has a diameter of 75 mm. The maximum value of
bending moment produced is 8.5 kN-m. What is the value of span length
(m) of the beam?
(a) 5.8 (b) 34 (c) 7 (d) 2

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A freely supported beam at its ends carries a central concentrated load,

and maximum bending moment is M. If the same load be uniformly
distributed over the beam length, then what is the maximum bending
moment?
" "
(a) M (b) (c) (d) 2M
) +

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q The bending moment diagram for the case shown below will be q as shown
in

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q A beam AB is hinged-supported at its ends and is loaded by couple P.c. as

shown in the given figure. The magnitude or shearing force at a section x of
the beam is:

(a) 0 (b) P (c) P/2L (d) P.C./2L

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc

Q When does contra flexure point occur on a beam?

(a) When bending moment is maximum.
(b) When bending moment changes its . sign.
(c) When shear force is zero after changing its sign.
(d) When shear force is constant.

Ans ()
SSC JE 2023 shankhnaad Batch for CE | ME Join by Y201 Code For Max Disc