CONTENTS

CHAPTER0 INTRODUCTION ................................................................................. 1

CHAPTER1 HARDWARE SETTING ...................................................................... 2
1.1 Package Contents ............................................................................................. 2
1.2 System Requirements....................................................................................... 2
1.3 Hardware Installation ....................................................................................... 2
CHAPTER2 DRIVER INSTALLATION FOR WINDOWS 98SE/2000/ME/XP .. 3
2.1 Application Installation for Windows 98SE/2000/ME/XP .............................. 3
2.2 Driver installation of Windows 98SE/2000/ME/XP ........................................ 4
2.3 Component Check - out ................................................................................... 4
CHAPTER3 MPEG TV STATION APPLICTION .................................................. 5
3.1 Running the Mpeg TV Station for the first time: ............................................. 5
3.2 Utility Interface in TV/AV/SVHS mode for Win98 SE/2000/ME/XP. ............ 6
3.3 FM Function Mode .......................................................................................... 8
3.4 Remote Control ................................................................................................ 9
3.5 Hot Keys Summary .......................................................................................... 9
CHAPTER4 INTERVIDEO WINDVR ................................................................... 10
4.1 Installation of InterVideo WinDVR ............................................................... 10
4.2 Mini-Controller .............................................................................................. 10
4.3 Function of WinDVR ..................................................................................... 11
CHAPTER5 ULEAD VIDEO STUDIO................................................................... 13
5.1 Install Video Studio........................................................................................ 13
5.2 Use Ulead Video Studio to make VCD .......................................................... 13
CHAPTER6 KWORLD SUPPORTING CENTER ............................................... 15
CHAPTER0 INTRODUCTION

Kworld Mpeg TV Station

Welcome to the world of Kworld Meg TV Station. With this multimedia product, you
can use it as a convenient tool for multiple purposes including video conferencing,
video editing, class presentation, or even entertainment.

Intervideo WinDVR
The powerful WinDVR will allow you to save TV and Video as Mpeg1 & 2 file. And
the scheduler can let you preset the recording time of your favorite TV show.

Ulead Video Studio

With the Ulead Video Studio, you can edit the captured mpeg file and save the video
as VCD format.

Features
Receive TV broadcasts: 125 channel cable/antenna-ready TV tuner
Receive and capture FM radio: Listen to the FM radio stations! (FM
model only)
External inputs for video capture: AV and S-video inputs for external
video resources like cameras and VCRs.
Video conference, video phone: MS NetMeeting for video conference
Wireless remote control included: Channels up/down, Volume up /
down, Record and Play Video.
Full motion video capture: Save as AVI and Mpeg 1 & 2 (By the
InterVideo WinDVR)
Still frame video capture: Capture to Image Buffer and save to
different resolution and format (BMP, TIF and Jpeg)
External interface: 75 ohm IEC coaxial input (cable TV), FM radio
antenna input, Composite (RCA) input, S-Video (SVHS) input, audio
input, and line audio output

1
CHAPTER1 HARDWARE SETTING

1.1 Package Contents

Unpack your Mpeg TV Station and make sure that all items are intact. The following
items should be included in your Mpeg TV Station package:
Kworld Mpeg UBS TV BOX
Audio cable
Remote controller (Optional)
FM Antenna (for FM model only)
User’s Manual
CD of installation software

1.2 System Requirements

IBM PC or compatible
Intel Pentium III 500 MHz CPU or better processor
Minimum 64 MB memory
Minimum 100 MB hard disk space available
Universal Serial Bus (USB) Plug and Play compliant interface for easy,
hassle-free installation.
VGA and with DirectDraw driver supporting 16 bit color or higher
Microsoft Windows 98SE/2000/ME
TV antenna or cable from CATV
Sound card
Speakers for audio output
CD-ROM drive
1.3 Hardware Installation
To install the BSB TV BOX into your computer, follow the steps below:

Connect the SVHS output device to SVHS-IN

Connect the camera or video tape recorder’s video output to AV-IN.
Connect the video tape recorder’s audio output to the AUD-IN.
Connect the TV antenna or cable to the TV-IN connector.
Connect the FM antenna to the FM-IN connector.
Connect the audio cable from line-in of the sound card to the AUD-OUT

2
CHAPTER2 DRIVER INSTALLATION FOR WINDOWS
98SE/2000/ME/XP

Your Mpeg TV Station package comes with complete Windows software utilities.
These utilities can be found from the CD-ROM in this package. Prior to installation, it
is highly recommended that all application programs should be disabled such as
anti-virus software and system monitoring applications.
Note that there are two drivers required to be installed for each component.
SPCA506A, WDM Video Capture
SPCA506A, Sunplus USB Camera

2.1 Application Installation for Windows 98SE/2000/ME/XP

1. Please insert the Installation CD into the CD-ROM driver and the auto run page
will pop up automatically.
2. On the auto run page, please choose “MpegTV Station /USB ” and then click on
the “PC TV Application” to start the installation.

3. After the Application is finish installation, please click “OK” to reboot the
Windows.

3
2.2 Driver installation of Windows 98SE/2000/ME/XP

After the application were installed well, and reboot the PC. Please plug the USB
connector of the USB TV BOX to the USB socket of your computer and windows
will automatically detect a new USB device that is your USB TV BOX and the add
new hardware wizard pops up. Click on next (IF the USB device is not detected by
your system, please restart your system and it should be detected. Then you can run
the application program.)

2.3 Component Check - out

Components check - out

Go to| Start | Setting | Control Panel | System | and double click System icon.
Go to Device Manager to check out if the driver has been installed.

4
CHAPTER3 MPEG TV STATION APPLICTION

3.1 Running the Mpeg TV Station for the first time:

Step1 Please click on the Start->Program->Mpeg TV Station USBTV->”Mpeg TV
Station USBTV” to run the TV application.
Step2 At the first time running, please choose your country and language as below:

Step3 Please select the TV input and click Scan

Step4 Then you would see the figure on the left telling you the channel are being
scanned.
Note:
The Step2 and Step 3 are only for the first time. You don’t need to repeat the steps in
the future. If you want reset, you can Go to | Start | Program | Mpeg TV Station |
then double click “Reset Mpeg TV Station“.

5
3.2 Utility Interface in TV/AV/SVHS mode for Win98 SE/2000/ME/XP.

Power: to terminate Mpeg TV-Station application.

Minize: to minimize user panel.

FM Mode: to switch to FM user panel.

MPEG: to switch mpeg software.

VIDEO SOURCE SELECTION: to switch Video source.

Record: Click record button to start motion video capturing.

Stop: Click this button stop capturing video.

Playback: Click to playback the latest recorded file

TV Tuner
1.Channel
Select TV channel
2.Fine Tune
As you watch TV, you can use the
Find Tune to do adjustment.
3.Cable &Antenna
1.
Select Cable or Antenna
4.All Freg Scan
All the channels frequency scan
5.Auto Scan
Click the Auto Scan to seek the channels
(If you never scan before)

6
Memory Channels
You can select memory channels

Channel Preview
You can configure your channel preview
layout from this dialog box

Select preview standard or customize

Standard -2x2, 3x3, 4x4, and 5x5.
Customize-you can set by your favorite.

Motion Capture
Video Format:
provides different types of video format and
video size.
Capture Folder:
where your motion capture older esides
Capture File:
where your motion capture file resides. Capture
Frame Rate:
provides you the selection of frame rate setting.
Enable Time Limit: you can predefine the
capture time limitation.
Enable Compress:
Mpeg TV Station provides varies types of video
codec you can use while doing motion capturing.

7
 Video
Color:
brightness, contrast, hue and saturation
adjustment. Move the pointer of each scroll bars
to see the effect.
Video System:
Although the TV tuner on your TV tuner capture
card is fixed and you have to set up the TV
system right after the first time you launch Mpeg
TV Station, you still have the chance to use this
product to display the varies standards of video
system.

Display Mode:
If your graphic adaptor supports Overlay mode, you can enable Overlay Surface
check bottom. Overlay surface support is a must to use CLOSED CAPTION function.
Window Style:
TV Frame: To have a frame to your video window.
4:3 Format: If you enable it, the aspect ratio will be fixed at 4:3.

3.3 FM Function Mode

1. TV MODE, to switch to TV user panel

2. Record / Play Audio, to record and play FM audio
3. FM frequency shift
4. Frequency scan bottom , you can perform fine tune and channel scan by click
on this group of bottoms

8
3.4 Remote Control

1. Power Off: Press this button to terminate the program.

2. Zoom: Click this button to toggle the Video Window
between full size and the previous size.
3. Numeric Keypad: Select the desired channel directly.
4. Channel Up/Down: Click this button to go to next/previous
channel.
5. Volume Up/Down: Click this button to increase/decrease
the audio volume
6. TV/FM: Click this button to toggle between TV or FM
7. Recall: Jump to last selected TV channel.
8. Source: Select Composite, SVHS, Antenna, and Cable.
9. Mute: Press this button to mute the sound.
10. Recode: Click this button to capture video file.
11. Play: Click this button to playback.
12. Freeze: Click this button to capture image.
13. Function: Click this button to channel preview.

3.5 Hot Keys Summary

Keyboard Buttons Function Descriptions

Keyboard Buttons Function Descriptions
F1 Pop up this Online Help File
F2 TV/FM mode switch
F3 Mute/Un-Mute mode switch
F4 Capture image flie
F5 Minimize Window
F12 TV on Window background
Right Arrow Volume up
Left Arrow Volume down
Up Arrow Channel up
Down Arrow Channel dowm
Alt+F4 Power off
Numeric Keys Used for channel selection

9
CHAPTER4 INTERVIDEO WINDVR

4.1 Installation of InterVideo WinDVR

1. Start Windows and insert the
Mpeg TV Station CD disk into
the CD-ROM drive. The Kworld
Installation Wizard will appear.
Please select “InterVideo
WinDVR “install Application.

2. Install InterVideo WinDVR

Application. You need key in
The WinDVR’s Serial number
(you can find on your CD
package) Click on “Next” to
continue

3. This final window on the left

would ask you to reboot the
system. Please click “Finish” to
reboot your system.

4.2 Mini-Controller

The Mini-Controller is an assistant to assist WinDVR to do the functions as below:

1. TV/AV/SVHS video source switch

2. Scheduler
3. TV Channel switch
4. Volume control

10
4.3 Function of WinDVR

1. Press the button. WinDVR starts recording the video source currently
showing in the display window.
2. Press the button to pause, the button to stop recording. As you stop a
recording, WinDVR prompts you to name the new recording. Type the name and
press OK.
3. Press the Timeshifting button. If the control panel is not expanded at the
time, the Timeshifting monitoring bar will appear. The Timeshifting feature
allows you to 'hold' live view temporarily, without interrupting the ongoing
recording session. Next you can replay or watch 'live' video with a delay.
Timeshifting gives you absolute control over how you watch television. You can
take a break watching a live show, and pick up where you left later. At any time,
you can also instantly jump back to live view.
4. You can use the capture icon on the control panel, or press the "P" key at
any time to capture a BMP file of a moving or static image.
5. Open the online help file.
6. You can use the Mpeg USB TV BOX’ s Mini-controller control the WinDVR.
7. Record Properties
The Record page of the properties sheet allows you to set the recording quality for
video and audio.
Video –
Select the video capture/TV tuner
card. Next select the video input
signal source:
Composite –
Video signal format that includes the
complete visual waveform, including
chromatic (color) and luminance
(brightness) picture information, as
well as control signals.
TV –
Antenna or Cable TV signal.

11
S-Video –
Type of video signal used in a growing number of Hi8, S-VHS, and digital videotape
formats. It transmits luminance (brightness) and chrominance (color) portions
separately, using multiple wires, avoiding the NTSC encoding process and the
resultant loss of picture quality. Also known as Y-C video.
Audio –
Select the audio hardware device. Next select the audio input signal source:
CD Audio, Microphone, Line In.
7.Recommended system requirements:

Performance: Good Better Best

Intel Pentium III Intel Pentium III Intel Pentium III
Processor:
500MHZ 700 MHZ 866MHZ
Operating System Windows 98SE, Windows2000, Windows Millennium

TV Tuner (PCI or USB) or display card with TV tuner capabilities

Input Device:
Input device must have Windows WDM capture driver support.

Sound: Sound card with one line-in jack

7200+rpm hard disk drive recommended If available, turn on DMA
Storage:
mode for hard disk drive (using your system’s setup utility)

12
CHAPTER5 ULEAD VIDEO STUDIO

5.1 Install Video Studio

Start Windows and insert the Ulead Video Studio CD disk into the CD-ROM drive.
The Ulead Video Studio Installation Wizard will appear. Please select Ulead Video
Studio SE 4.0 install Application.
Then you would see the application program has been generated and just close the
window of application program. This final window on the left would ask you to
reboot the system.
Ulead Video Studio a consumer video editing software that lets users quickly and
easily produce their own home videos complete with attractive titles, transitions, and
sound. Unlike other software, Ulead Video Studio features an intuitive step-based
interface that helps users get started right away.
By following the steps, from Start to finish, you will be creating video masterpieces
before you know it. Once done with that, you can then choose to watch the playback
from videotape, desktop, or stream it over the Internet.

5.2 Use Ulead Video Studio to make VCD

Please click on the Start->Program->Ulead Video Studio 4.0 SE->” Ulead Video
Studio 4.0 SE” to run the TV application.

1. Open the new project, select VCD

format, then set the project name.
2. Load video files
3. Select Finish
4. Select Make Movie
5. Save as file as .mpg
6. Select Options
7. Compression: Select VCD format
8. Then save the file, and Video
Studio will automatically save the
VCD format.
Note:
The Video Studio user, if you want
make the VCD, please select the NTSC
VCD or PAL VCD format.
NTSC VCD:
Frame size: 352X240

13
 Frame rate: 29.97 fps
PAL VCD:
Frame size: 352X288
Frame rate: 25fps
You have to use the VCD, which it
provided the function for program, then
this program will be record by mpeg file
under Video Studio, after then it will be

燒錄done to VCD
The CD-R Software: WinOnCD,
Nero-Burning Rom, Easy CD Creator

3.5。

If you have any question, you can see

the online help file.

14
CHAPTER6 KWORLD SUPPORTING CENTER

For more information, please check our Website:

1.Kworld Website: http://www.kworld.com.tw
2.E-mail: [email protected]

15