01.03.
2023
Technical data sheet (Version 1)
Marine diesel engine
D3872LE433 (V12-2200)
Performance data ¹
Rated power 1618 kW
Rated power 2200 PS
Speed 2300 rpm
Bore/Stroke 138/165 mm
Displacement 29,62 liter
Rated torque 6718 Nm
Maximum torque 7316 Nm
at speed 1200-2100 rpm
Compression ratio [ε] 17,0 :1
Mean effective pressure 28,50 bar
Mean piston speed 12,65 m/s
Consumption data ²
Specific fuel consumption ¹ 213 g/kWh
The engine illustrated may not entirely be
Absolute fuel consumption ¹ 412 l/h identical to production standard engine
Lowest fuel consumption ³ 195 g/kWh
Engine description
Application Main propulsion diesel for ships with fixed pitch propeller
Operation profile Up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction Four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 12 cylinders in V-arrangement, single cylinder heads with wet replaceable cylinder liners
Air system Two-stage turbocharger with charge air intercooler and wastegate
Cooling system Seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system Force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with MD1 control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm³ (180Nm)
Alternator Three-phase generator with rectifier and transistorized governor, 28V, 120A
Starting system Solenoid-operated electric starter, 24V, 7.0kW
Service Oil change interval 400 operating hours
Classification -----
Exhaust status IMO Tier II, RCD 2013/53/EC, EPA Tier 3 recreational
¹ Values at rated power D3872LE433 (V12-2200)
² Diesel fuel according to DIN EN 590 (tolerance +5% - ISO 3046)
³ Values on propeller curve
MAN Marine Sales Engineering Printed by : b4002
[email protected] page 1 of 2 Date : 07.03.2023
D3872LE433 (V12-2200)
A - overall width............ 1157 mm
B - overall length........... 2374 mm
C - overall height........... 1328 mm
D - above crank shaft.... 863 mm
E - length to flywheel..... 1792 mm
Engine weight (dry)....... 2700 kg
Combustion parameters ¹ Heat balance ¹
Intake air temperature (max.) 45 °C Exhaust gas heat 1080 kW
Intake air vacuum (min/max) 30/60 mbar Cooling water heat 1020 kW
Intake air volume flow 6000 m³/h Intercooler heat 350 kW
Radiation heat 45 kW
Exhaust gas temperature 515 °C
Exhaust gas volume flow 16500 m³/h Noise emission (sound power) ¹
Exhaust gas mass flow 7190 kg/h Engine surface noise (Lwa) dB(A)
Exhaust back pressure (min/max) 20/80 mbar Free exhaust noise (Lwa) dB(A)
Specific fuel consumption²
250
240
230
[g/kWh]
220
210
200
190
180
0
0
00
00
00
00
00
00
00
00
00
00
00
00
00
00
60
70
80
90
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Speed [rpm]
full load curve propeller curve
< The rated power is based on reference conditions according to ISO 3046-1 (2002) >
< Intake air temperature, max. 45°C | sea water temperature, max. 32°C >
< Barometric pressure 1000 mbar | air humidity 60% >
< Exponent for propeller curve 2,5 >
< Engine specifications are subjected to change without prior notice >
¹ Values at rated power
² Diesel fuel according to DIN EN 590 (tolerance +5% - ISO 3046)
³ Values on propeller curve
MAN Marine Sales Engineering Printed by : b4002
[email protected] page 2 of 2 Date : 07.03.2023
