BILL NO.

3B: DOOR

Item Description Unit Qty Rate

ELEMENT H - DOORS

PRECAST CONCRETE GRADE 25 INCLUDING ALL MOULD.

FINISHES FAIR ON ALL FACES, STORED, HOISTED AND
FIXED IN POSITION, BEDDED AND POINTED IN CEMENT
AND SAND (1:3)
m 110
A 125mm x 230 mm High lintel reinforced with and including 4 No.
10 mm diameter high tensile deformed rod and 6 mm diameter
mild steel links at 100 mm centres including all necessary
plastering and painting
m 13
B 125mm x 325 mm High lintel reinforced with and including 2 No.
10 mm diameter high tensile deformed rod at top, 2 No. 12 mm
diameter high tensile deformed rod at bottom and 6 mm
diameter mild steel links at 200 mm centres including all
necessary plastering and painting
m 15
C 125mm x 350 mm High intel reinforced with and including 2 No.
10 mm diameter high tensile deformed rod at top, 2 No. 12 mm
diameter high tensile deformed rod at bottom and 6 mm
diameter mild steel links at 200 mm centres including all
necessary plastering and painting

DOOR FRAMING AND FINISHING

Wrot hardwood timber as described

No 3
D 38 mm Thick solid core flush door with fixed glass panel on both
sides overall size 2750 mm x 2100 mm high; each fixed panel
overall size 475 mm x 2100 mm high comprising 4 No.fixed
lights in 6 mm thick green-tinted glass (glass and glazing works
included); door 1800 mm x 2100 mm high generally constructed
of 100mm * 26mm hardwood top, intermediate, bottom rails and
stiles with hardwood infilled, faced both sides with 6 mm thick
marine waterproof plywood in approved veneer finish including
lipped all round with hardwood edging piece, doors in 2 equal
leaves including meeting edging piece and hung door on butt
hinges (measured separately) (Type D1A)
No 15
E 38 mm Thick solid core flush door overall size 1830 mm x 2100
mm high generally constructed of 100 mm x 26 mm hardwood
top, intermediate, bottom rails and stiles with hardwood infilled,
faced bothsides with 6 mm thick marine waterproof plywood in
approved veneer finish including lipped all round with hardwood
edging piece, doors in 2 equal leaves including meeting edging
piece and hung door on butt hinges (measured
separately) (Type D2)

To Collection RM

B3/H/1
BILL NO.3B: DOOR

Item Description Unit Qty Rate

ELEMENT H - DOORS

DOOR FRAMING AND FINISHING

Wrot hardwood timber as described

A 38 mm Thick solid core flush door overall size 900 mm x 2100 No 25

mm high generally constructed of 100 mm x 26 mm hardwood
top, intermediate, bottom rails, and stiles with hardwood infilled,
faced both sides with 6 mm thick marine waterproof plywood in
approved veneer finish, lipped all round with hardwood edging
piece, including hung door on butt hinges (measured separately)
(Type D3)

B 38 mm Thick solid panel door overall size 900 mm x 2100 mm No 4

high generally constructed of hardwood frame and panel to
Architect's approval, including hung door on butt hinges
(measured separately) (Type D4)

C 38 mm Thick louvre with glazed view panel door overall size 900 No 11
mm x 2100 mm generally constructed of hardwood framing in 2
equal leaves, each leaf with 250 mm x 1050 mm high fixed
glazed panel in 6 mm thick clear glass (glass and glazing works
included) and 50mm x 600m high louvre bottom panel, lipped all
round with hardwood edging piece, including meeting edging
piece and hung door in butt hinges (measured separately) (Type
D5)
D m 340
150mm x 65 mm Rebated head/jamb/ transome

Sawn hardwood timber as described

E m 252
50mm x 25m Packing piece

PREPARE, KNOT, PRIME, STOP AND APPLY ONE COAT

APPROVED WOOD PRIMER, ONE COAT 'KCC ALKYD
131UC-ALKYD BASED PRIMER' AND TWO COATS 'KCC
RADIANCE GLOSS ENAMEL' OR APPROVED EQUIVALENT
PAINT SYSTEM OF APPROVED COLOUR AND METHOD ON
F m2 292
General surfaces of door
G m 340
General surfaces of door frame exceeding 200 mm and not
exceeding 300 mm girth

To Collection RM

B3/H/2
BILL NO.3B: DOOR

Item Description Unit Qty Rate

ELEMENT H - DOORS

PREPARE AND APPLY ONE COAT OF APPROVED

ALUMINIUM WOOD PRIMER AS DESCRIBED BEFORE FIXED
ON BACK OF
A m 340
General surfaces of door frame exceeding 200 mm and not
exceeding 300 mm girth

TIMBER SLIDING DOOR

B No 1
Supply and install semi-solid core waterproof sliding door overall
size 1000 mm x 2100 mm high complete with frame, aluminum
top rail, roller set, end stopper, gulde including head box,
aluminum 'U' channel at bottom and finished in approved paint
finish all to manufacturer's details (Type SD1)

SUPPLY AND FIX THE FOLLOWING FIRE DOOR INCLUDING

FINISHES AS DESCRIBED ALL IN ACCORDANCE WITH THE
MANUFACTURER'S INSTRUCTION INCLUDING PRODUCING
CERTIFICATE FROM THE INSPECTORATE OF FIRE
SERVICES MALAYSIA
C No 4
One hour fire rated door overall size 900 mm x 2100 mm high
complete with door frame in approved paint finish (Type FD1)
D No 3
Pair of one hour fire rated door overall size 1800 mm x 2100 mm
high in 2 equal leaves complete with door frame in approved
paint finish (Type FD2)
E No 2
Pair of one hour fire rated door overall size 1350 mm x 2100 mm
high in 2 equal leaves complete with door frame in approved
paint finish (Type FD3)

To Collection RM

B3/H/3
BILL NO.3B: DOOR

Item Description Unit Qty Rate

ELEMENT H - DOORS

FABRICATE, SUPPLY AND INSTALL POWDER COATED

ALUMINIUM FRAMED DOOR AND FIXED PANEL (GLASS AND
GLAZING WORKS INCLUDED) AS SPECIFIED IN APPROVED
ALUMINIUM EXTRUDED SECTION COMPLETE WITH 6 MM
THICK GREEN TINTED GLASS, FRAMES, MULLIONS,
TRANSOMES, ALL FITTINGS, FIXING DEVICES,
IRONMONGERY INCLDUING SUB-FRAMES, SUB-SILLS AND
ALL ACCESSORIES BUILDING IN OR CUTTING AND
PINNING LUGS, BEDDING AND POINTING FRAMES IN
CEMENT MORTAR (1:3) AND POINTING WITH APPROVED
A SEALANT No 4

Overall size 3050 mm x 2100 mm high comprising swing door

overall size 1800 mm x 2100 mm high in 2 equal leaves, 2 side
panel each overall size 475mm x 2100mm high with 4 fixed
lights all in 6mm thick green tinted glass (glass and glazing
works included) (Type D1)

FABRICATE, SUPPLY AND INSTALL POWDER COATED

EXPANDED METAL MESH PANELLING INCLUDING
FRAMING, ALL JOINTS FILLET WELDED AND SMOOTH
GRINDED, SUBFRAMING BOLTED TO COLUMN OR WALL
B COMPLETE WITH ALL BOLTS, NUTS, CONNECTION PLATE No 2
ALL AS DESCRIBED

Grille door overall size 900 mm x 2100 mm high generally

constructed of 35 mm x 76 mm x 4.5 mm thick G.I. expanded
metal mesh with powder coated finish and selected print on top
including 45 mm x 45 mm mild steel L angle support all round
including 100mm x 50mm rectangular hollow section as door
jamb and finish to approval (Type GD1)

FABRIACTE, SUPPLY AND INSTALL NATURAL ANODISED

ALUMINIUM ROLLER SHUTTER SLATS COMPLETE WITH
G.I. FRAME, OVERHEAD GEAR BOX, GUIDE RAIL AND
IRONMONGERY INCLUDING ALL FIXING ACCESSORIES,
BUILDING IN OR CUTTING AND PINNING LUGS, BEDDING
C AND POINTING FRAMES IN CEMENT MORTAR (1:3) ALL IN No 1
ACCORDANCE WITH MANUFACTURER'S DETAILS No 1
D
Roller shutter overall size 5300 mm x 2800 mm high (Type RS1)

Roller shutter overall size 4850 mm x 2800 mm high (Type RS2)

To Collection RM

B3/H/4
BILL NO.3B: DOOR

Item Description Unit Qty Rate

ELEMENT H - DOORS

FABRICATE, SUPPLY, AND INSTALL PERFORATED POWDER

COATED ALUMINIUM ROLLER SHUTTER SLATS COMPLETE
WITH G.I. FRAME, OVERHEAD GEAR BOX, GUIDE RAIL AND
IRONMONGERY INCLUDING ALL FIXING ACCESSORIES,
BUILDING IN OR CUTTING AND PINNING LUGS, BEDDING,
AND POINTING FRAMES IN CEMENT MORTAR (1:3) ALL IN
ACCORDANCE WITH MANUFACTURER'S DETAILS

A Roller shutter overall size 4000mm x 2800mm high (Type RS3) No 1

SUPPLY AND FIX THE FOLLOWING OR OTHER EQUAL AND

APPROVED IRONMONGERY INCLUDING PROVIDING FOR
REQUISITE MATCHING SCREWS FIXED TO FRAME OR SET
IN CONCRETE FLOOR

B KASA 102 x 76 x 2mm - 2BB Fully 304 SS hinges No 239

C KASA 127 x 89 x 3 mm Fully 304 SS hinges No 42

D KASA HS-EN2 (AL) Floor spring No 8

E KASA 64T/74-8000/G2-HL-07/L8080-AA19 SS Mortice Lockset Set 6

F KASA 64T/64-8000/G2-L8080-AA19 SS Mortice Lockset Set 17

G KASA 64T/64-6P-620N/G2-9023-AA19 Deadlock Set 6

H KASA 32DC/64-6P-620N/G2-9023-AA19 Deadlock Set 3

I KASA 47HC-620N/G2-9023-AA19 Deadlock Set 10

J KASA 32D-ISEO 783380304-9022-AA19 Lockcase Set 4

K KASA 8000 Rebated part No 6

L KASA 16N/62 Rebated part No 7

M KASA BT-200/300 SS Flush bolt Set 8

N KASA 1240 SS Dust trap No 13

O KASA 732 Brass ball catch No 22

P KASA CH76 Case ring handle No 22

To Collection RM

B3/H/5
BILL NO.3B: DOOR

Item Description Unit Qty Rate

ELEMENT H - DOORS

SUPPLY AND FIX THE FOLLOWING OR OTHER EQUAL AND

APPROVED IRONMONGERY INCLUDING PROVIDING FOR
REQUISITE MATCHING SCREWS FIXED TO FRAME OR SET
IN CONCRETE FLOOR

A KASA AFB-160 SS Automatic flush bolt Set 5

B EMBB285 SS top and bottom flush bolt Set 4

C 100 x 100 SS Female indicating sign No 6

D 100 x 100 SS Male indicating sign No 4

E 100 x 100 SS Handicapped indicating sign No 1

F KASA DCF-3770/733/FD complete with slide arm door closer No 14

G KASA DCF-3770/733 complete with slide arm door closer No 68

H KASA SF-250-F SS Door selector No 21

I KASA 81-B SS W/Mounted door stopper No 24

J KASA HM-003 SN F/Mounted door stopper No 40

K 1250 x 35SS K-Lock Push Pull handle and dust trap with PST Pair 22

L 159B x 1200 SS Hairline finish Push Pull handle Pair 35

M Henderson 100(1 x 1) - 280/2000 -TG300 Sliding door gears Set 1

N KASA 47HC-8003/G2-L8080-Briton 379 Mortice lockset Set 4

O Stribo 925mm Conceal door seal No 2

P Stribo Joint profile L2 door seal (3200 x 3) Set 1

Q Raven RP-16-2-1-Bal door seal (2100mm) No 1

R Master keying allowance (GMK, CGMK, MK, KA, KD) No 72

To Collection RM

B3/H/6
BILL NO.3B: DOOR

Item Description Unit Qty Rate

ELEMENT H - DOORS

COLLECTION

FROM PAGE:

B3/H/1

B3/H/2

B3/H/3

B3/H/4

B3/H/5

B3/H/6

To Bill Summary RM

B3/H/7
B3/H/8