Scribd
Upload
81 views1 page

RxqLAqoza7pbNi3pvz1GfRieVcYTaAbfFuel Specifications EN590-10PPM

This document provides specifications for diesel fuel, including properties like cetane number, density, viscosity, sulfur content, and distillation characteristics. Minimum and maximum limits are given for most properties, and test results are provided. A disclaimer is included stating the information is provided for informational purposes only.

Uploaded by

albert.mamuev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views1 page

RxqLAqoza7pbNi3pvz1GfRieVcYTaAbfFuel Specifications EN590-10PPM

This document provides specifications for diesel fuel, including properties like cetane number, density, viscosity, sulfur content, and distillation characteristics. Minimum and maximum limits are given for most properties, and test results are provided. A disclaimer is included stating the information is provided for informational purposes only.

Uploaded by

albert.mamuev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EN590-10PPM: Diesel Fuel Specification

Property Unit Lower limit Upper limit Result Test Method


Visual
Aspect Clear
inspection
Colour 2.0 ASTM D1500
Cetane number 51.0 51.0 EN ISO 5165
Cetane index 46.0 46.0 EN ISO 4264
EN ISO 3675,
Density @ 15°C kg/m3 820 845 845
EN ISO 12185
Viscosity at 40°C mm2/s 2.0 4.5 4.5 EN ISO 3104
EN ISO
20846, EN
Sulphur content mg/kg 10.0 10.0
ISO 20847,
EN ISO 2088
Flash point °C Above 55 62 EN ISO 2719
Carbon residue % m/m 0.30 EN ISO 10370
Ash content % m/m 0.01 EN ISO 6245
Water content mg/kg 200 EN ISO 12937
Total contamination mg/kg 24 EN ISO 12662
Fatty Acid Methyl Ester
% v/v 7 EN 14078
(FAME) (biodiesel) content
Polycyclic aromatic
% m/m 11 (8) EN ISO 12916
hydrocarbons
Copper strip corrosion (3
index Class 1 Class 1 EN ISO 2160
hours at 50°C)
Lubricity, corrected wear
EN ISO
scar diameter (wsd 1.4) at μm 460
12156-1
60°C
Oxidation Stability g/m3 25 EN ISO 12205
Oxidation Stability h 20 EN 15751
Distillation recovered at
% v/v 85 < 65 65/360 EN ISO 3405
150 °C/ 250 °C
95%(V/V) recovered at °C 360
Cold Filter Plugging Point
°C -15 -12.0
(winter)
Cold Filter Plugging Point
°C -5 -2.0
(summer)
Manganese content mg/l 2.0 EN 16576
IP 387,
Filter blocking tendency 2.52
procedure B
Cloud Point (summer) 0 EN ISO 23015
Cloud Point (winter) 0 EN ISO 23015

The information provided in this document are provided for and on behalf of one of BLK Global Ltd.’s suppliers. They are for informational
purposes only and are provided “as is”, “as available” and “with all faults”. BLK Global Ltd. hereby expressly disclaims any and all warranties,
express or implied, including but not limited to any warranties of quality, condition, durability, accuracy, performance, reliability, merchantability
or fitness for a particular purpose. To the maximum extent permitted by law, Blkcommodities.com makes no representation or warranties on
the validity, accuracy, correctness, quality, reliability, stability, completeness or correctness of any information provided.

BLK Global Ltd.


272 Bath Street | G2 4JR | Glasgow | United Kingdom

You might also like