Publication No.

RU-CTX-0720B
Replaces RU-CTX-0819A and all previous versions

CENTER MOUNT UNIT COOLER

Small to Medium Walk-Ins
Cooler and Freezer Applications
Air Defrost
4,100 to 30,400 BTUH

Electric Defrost
3,700 to 32,400 BTUH
2

CENTER MOUNT
Features
Center Mount Unit Coolers are designed for use in walk-in coolers and freezers with very low headroom clearance.
Units mount flush to the ceiling to provide extra storage space. Features include two-way air flow to provide for
even circulation and temperature, easy serviceability, usability with multiple refrigerants, and are available in air and
electric defrost models.

SIZES ELECTRICAL
There are a wide array of sizes available with capacities Available for 115V, and 208/230V. All components are
ranging from 3,700 to 32,400 BTUH at a 10° TD. One factory wired to terminal strips and are UL and cUL
through five fan models are available with air flow listed.
spanning a range of 572 to 3,150 CFM.
AIR DEFROST
HOUSING Air Defrost models (RE6A) are designed for use in
The embossed aluminum casing is lightweight yet coolers down to 35oF.
durable. Each fan section is baffled to prevent short
cycling of the discharge air. The units are designed to
ELECTRIC DEFROST
Electric Defrost 6 FPI models models (RE6E) are
mount flush to the ceiling and are compliant with NSF
designed for use in coolers and freezers down to -10oF
requirements. Top panel contains 3/8” mounting holes
and 4 FPI models (RE4E) are designed for use in freezers
to simplify installation. The housing is sloped to provide
between 32°F to -10°F.
more efficient condensate draining. An uniquely shaped
control access cover allows for easy access for service in
confined spaces. Optional Features
COIL • EcoNet® Enabled Controller1 factory-installed
Copper hairpins consist of high efficiency 3/8” enhanced • EcoNet® Command Center (loose)
copper tubes which are staggered and mechanically • Thermostat - Mechanical or Electric (mounted or
expanded into corrugated aluminum fins achieving loose)
maximum heat transfer while reducing refrigerant • Thermostatic Expansion Valve (mounted or loose)
charge. Die formed fin collars provide even fin spacing.
• Electronic Expansion Valve (mounted or loose)
Medium temperature models are available with 6 fins per
inch (FPI) and low temperature models with 6 and 4 FPI. • Liquid Line Solenoid Valve (mounted or loose)
Sweat connections are standard on all models. • Insulated Drain Pan
• Painted Cabinet (White or Black)
FANS
• Coated Cabinet
Aluminum 12” fans are balanced to provide vibration-
free operation. Improved black plastic fan guard design • Stainless Steel Cabinet
and deep draw venturi achieve optimal air pattern. Fan • Coated Coil (Russproof, Heresite, Bronz-Glow, or
motors and blades can be easily accessed by removing Electrofin®)
the fan guard. • Heat Exchanger (loose)
MOTORS Note
Standard models feature highly efficient Dual Speed
1
EcoNet Control Package includes: EEV; suction pressure
Electronically Commutated (EC) motors. Dual Speed transducer; suction, entering air coil temp. thermistors; local
on-board two-row LCD display and push-button adjustments.
EC motors are available for 115V or 208/230V and are
(Controller replaces TXV, liquid line solenoid valve, room
compliant with California Title 24 regulations. All motors thermostat, defrost termination and fan delay, and time
include thermal overload protection. clock.)

MODEL NUMBER NOMENCLATURE

CONFIGURABLE BASE MODEL
R E 6 A 041 A D A
Fins
Defrost BTUH in Unit Motor
Brand Style Per Revision
Type Hundreds Voltage^ Type
Inch
R - Russell E - Center Mount 4 FPI A - Air A - 115/1/60 D - Dual Speed EC
6 FPI E - Electric D - 208-230/1/60

Note
^ 50 Hz available. Contact Factory for additional information.
 3

LOW HEIGHT UNIT COOLER

Highlighted Features and Options

FANS AND HOUSING COILS AND DEFROST HEATERS

• Extra low height — mounts flush to ceiling • Available in 4 or 6 FPI
• Two-way air flow for even air circulation and • Electric defrost heaters are mounted on the air
consistent temperature intake coil face to provide optimal performance and
• 12” aluminum fans are balanced for vibration-free are easily accessible by removing the venturi panel
operation • Independent defrost termination on each coil slab
• High efficiency fan guard design and deep draw for efficient defrosting
venturi provide optimal air flow • Independent drain pan per coil
• Easy access to fan motors
• Sloped housing for efficient condensate draining
• UL and NSF approved

ECONET ENABLED UNIT COOLERS (Optional)

Developed in conjunction with Rheem Manufacturing specifically for walk-in coolers and freezers — it builds on
the reliability and efficiency of Rheem’s EcoNet technology.

• Saves energy in refrigeration systems through precise superheat

and space temperature control, fan cycling, and controlling how
often the system goes into defrost based on compressor runtime
• Eliminates unnecessary defrosts
• Maximizes energy efficiency with less compressor runtime
• Reduces fan speed to 50% during off cycle for energy
savings
• Can be used with a condensing unit in single and multiple
evaporator installations as a group
• Optional EcoNet Command Center with intuitive graphical
interface controls up to 32 devices (including the Command
Center) through one display, provides continuous
communication between system components, and the remote
mount display allows for EcoNet Enabled Unit Coolers to be
programmed, monitored and troubleshot outside of the space
being cooled

ELECTRICAL AND PIPING

Unit shown with
EcoNet option
installed

• Unique design of control access cover allows for service in confined spaces
• Ample room in electrical and piping compartments for easy access
4

CENTER MOUNT
EVAPORATOR APPLICATION RATINGS
Multiple conditions combine to determine the application capacity of an evaporator. Walk-in space temperature,
relative humidity, saturated suction temperature difference, and outdoor ambient temperature. All of the factors
are considered when calculating an evaporator application rating. These ratings are considerably higher than the
net capacity value used for DOE ratings (AWEF).
The AWEF of an evaporator is calculated using the dry coil capacity and the daily evaporator power consumption.
Power consumption included fan and defrost power. Evaporator net capacity reported to the DOE database is dry
coil capacity less the full power fan watts. DOE test conditions are at 10°F evaporator/SST temperature difference
and less than 50% relative humidity and 96°F liquid temperature. These conditions create a uniform test method,
but should not be used for equipment selection. The equipment selected would be too large for the application.
Russell’s published application ratings are a guideline for proper equipment selection. They account for true
operating conditions experienced by equipment.

Application Rating and Electrical Data - Air Defrost Models

BTUH Capacity @ Total Fan Motor
25°F S.T. & 10°F TD AMPS - 1 Phase
No. MCA MOPD
Model Dual Speed
R407A/ CFM of
Number EC Motors†
R404A R448A/ Fans
208- 208- 208-
R449A/B^ 115V 115V 115V
230V 230V 230V
RE6A041*DA 4,100 4,900 572 1 0.8 0.5 15.0 15.0 20 20
RE6A070*DA 7,000 8,200 1,204 2 1.6 1.0 15.0 15.0 20 20
RE6A084*DA 8,400 9,900 1,144 2 1.6 1.0 15.0 15.0 20 20
RE6A104*DA 10,400 12,300 1,806 3 2.4 1.5 15.0 15.0 20 20
6
RE6A128*DA 12,800 15,100 1,716 3 2.4 1.5 15.0 15.0 20 20
FPI
RE6A141*DA 14,100 16,600 2,408 4 3.2 2.0 15.0 15.0 20 20
RE6A169*DA 16,900 19,900 2,288 4 3.2 2.0 15.0 15.0 20 20
RE6A204*DA 20,400 23,900 2,860 5 4.0 2.5 15.0 15.0 20 20
RE6A258*DA 25,800 30,400 3,150 5 4.0 2.5 15.0 15.0 20 20
Consult Factory for 50Hz Operation
* Asterisk represents a variable character based on voltage ordered. See page 2 for nomenclature.
^ Refrigerants with large glides are rated at dew point temperature. Use R407A capacity ratings for R407C and R407F.
† Dual-speed EC motors are compliant with California Title 24 regulations.
Models were designed in anticipation of the July 2020 Department of Energy AWEF regulations for evaporators for Walk-in
Coolers and Freezers in boxes less than 3,000 sq. ft. See below for AWEF compliance ratings.

AWEF Ratings - Air Defrost Models

Air Defrost Department of Energy Annual * Asterisk represents a variable character based upon voltage
ordered. See page 2 for nomenclature.
Walk-In Energy Factor (AWEF) Ratings
1. If the model has a numerical value in the AWEF table, the
Base Model Defrost following statement applies: “The refrigeration system is
FPI AWEF
Number Type designed and certified for use in walk-in cooler applications.”
Cooler Models1
RE6A041*DA Air Defrost 6 9.00
RE6A070*DA Air Defrost 6 9.00
RE6A084*DA Air Defrost 6 9.00
RE6A104*DA Air Defrost 6 9.00
RE6A128*DA Air Defrost 6 9.00
RE6A141*DA Air Defrost 6 9.00
RE6A169*DA Air Defrost 6 9.00
RE6A204*DA Air Defrost 6 9.00
RE6A258*DA Air Defrost 6 9.00
 5

LOW HEIGHT UNIT COOLER

Application Rating and Electrical Data - Electric Defrost Models
BTUH Capacity @
208-230V/1
-20°F S.T. & 10°FTD
No.
Model Total Fan
R407A/ CFM of MCA MOPD
Number Motor AMPS
R404A R448A/ Fans
R449A/B^ Dual Speed Base EcoNet Base EcoNet
EC Motor† Model1 Enabled2 Model1 Enabled2
RE6E037DDA 3,700 4,300 602 1 0.5 15.0 15.0 20 20
RE6E045DDA 4,500 5,200 572 1 0.5 15.0 15.0 20 20
RE6E075DDA 7,500 8,700 1,204 2 1.0 15.0 15.0 20 20
RE6E089DDA 8,900 10,300 1,144 2 1.0 15.0 15.0 20 20
6 RE6E108DDA 10,800 12,400 1,806 3 1.5 15.0 15.0 20 20
FPI RE6E125DDA 12,500 14,300 1,716 3 1.5 15.0 15.0 20 20
RE6E137DDA 13,700 15,400 2,408 4 2.0 15.0 15.0 20 20
RE6E182DDA 18,200 20,900 2,288 4 2.0 15.0 15.0 20 20
RE6E221DDA 22,100 25,500 2,860 5 2.5 15.0 16.3 20 20
RE6E278DDA 27,800 32,400 3,150 5 2.5 15.0 24.4 20 30
RE4E037DDA 3,700 4,300 572 1 0.5 15.0 15.0 20 20
RE4E075DDA 7,500 8,700 1,144 2 1.0 15.0 15.0 20 20
4 RE4E107DDA 10,700 12,200 1,716 3 1.5 15.0 15.0 20 20
FPI RE4E149DDA 14,900 17,600 2,288 4 2.0 15.0 15.0 20 20
RE4E186DDA 18,600 21,300 2,860 5 2.5 15.0 16.3 20 20
RE4E234DDA 23,400 27,200 3,150 5 2.5 15.0 24.4 20 30

Heater Consult Factory for 50Hz Operation

Model Heater ^ Refrigerants with large glides are rated at dew point
Amps
Number Watts temperature. Use R407A capacity ratings for R407C and R407F.
230V/1 † Dual-speed EC motors are compliant with California Title 24
RE6E037DDA 3.2 750 regulations.
RE6E045DDA 3.2 750 1. Base Model MCA/MOPD Represents Motor Circuit since Defrost
RE6E075DDA 6.5 1,500 Heaters are powered via the Condensing Unit.
RE6E089DDA 6.5 1,500 2. EcoNet Enabled Units are not powered by Condensing Unit so
6 RE6E108DDA 9.8 2,250 Defrost Heaters are incorporated into shown MCA/MOPD.
FPI RE6E125DDA 9.8 2,250 Models were designed in anticipation of the July 2020
RE6E137DDA 13.0 3,000 Department of Energy AWEF regulations for evaporators for Walk-
RE6E182DDA 13.0 3,000 in Coolers and Freezers in boxes less than 3,000 sq. ft. See page 6
RE6E221DDA 16.3 3,750 for AWEF compliance ratings.
RE6E278DDA 24.4 5,620
RE4E037DDA 3.2 750
RE4E075DDA 6.5 1,500
4 RE4E107DDA 9.8 2,250
FPI RE4E149DDA 13.0 3,000
RE4E186DDA 16.3 3,750
RE4E234DDA 24.4 5,620

Mounts flush to ceiling to

maximize storage space

Easy access to fan motors

Sloped housing for efficient
condensate draining
6

CENTER MOUNT
AWEF Ratings - Electric Defrost Models
Electric Defrost Department of Energy Annual Electric Defrost Department of Energy Annual
Walk-In Energy Factor (AWEF) Ratings Walk-In Energy Factor (AWEF) Ratings
Base Model Defrost Base Model Defrost
FPI AWEF FPI AWEF
Number Type Number Type
Cooler Models1 Freezer Models2
RE6E037DDA Electric Defrost 6 9.00 RE6E037DDA Electric Defrost 6 4.15
RE6E045DDA Electric Defrost 6 9.00 RE6E045DDA Electric Defrost 6 4.15
RE6E075DDA Electric Defrost 6 9.00 RE6E075DDA Electric Defrost 6 4.15
RE6E089DDA Electric Defrost 6 9.00 RE6E089DDA Electric Defrost 6 4.15
RE6E108DDA Electric Defrost 6 9.00 RE6E108DDA Electric Defrost 6 4.15
RE6E125DDA Electric Defrost 6 9.00 RE6E125DDA Electric Defrost 6 4.15
RE6E137DDA Electric Defrost 6 9.00 RE6E137DDA Electric Defrost 6 4.15
RE6E182DDA Electric Defrost 6 9.00 RE6E182DDA Electric Defrost 6 4.15
RE6E221DDA Electric Defrost 6 9.00 RE6E221DDA Electric Defrost 6 4.15
RE6E278DDA Electric Defrost 6 9.00 RE6E278DDA Electric Defrost 6 4.15
1. If the model has a numerical value in the AWEF table, RE4E037DDA Electric Defrost 4 3.95
the following statement applies: “The refrigeration RE4E075DDA Electric Defrost 4 3.98
system is designed and certified for use in walk-in cooler RE4E107DDA Electric Defrost 4 4.01
applications.” RE4E149DDA Electric Defrost 4 4.06
2. If the model has a numerical value in the AWEF table, RE4E186DDA Electric Defrost 4 4.09
the following statement applies: “The refrigeration RE4E234DDA Electric Defrost 4 4.15
system is designed and certified for use in walk-in freezer
applications.”

Distributor Nozzle - Air Defrost Models

Part Numbers Number
Model
Nozzle @ Liq. Temp. TXV^ @ Liq. Temp. EEV @ Liq. Temp. of
Number
50°F 100°F 50°F 100°F 50°F 100°F Circuits
R404A
RE6A041*DA L, #1/6 L, #1/2 SBFSE-AA-C SBFSE-AA-C SER-AA SER-AA 2
RE6A070*DA L, #1/4 L, #3/4 SBFSE-AA-C SBFSE-A-C SER-A SER-A 2
RE6A084*DA L, #1/4 L, #3/4 SBFSE-A-C SBFSE-A-C SER-A SER-B 2
RE6A104*DA L, #1/3 L, #1 SBFSE-A-C SBFSE-A-C SER-A SER-B 4
6
RE6A128*DA L, #1/2 L, #1-1/2 SBFSE-A-C SBFSE-B-C SER-B SER-B 4
FPI
RE6A141*DA L, #1/2 L, #1-1/2 SBFSE-A-C SBFSE-B-C SER-B SER-B 4
RE6A169*DA L, #3/4 L, #2 SBFSE-A-C SBFSE-B-C SER-B SER-B 4
RE6A204*DA L, #3/4 L, #2 SBFSE-B-C SBFSE-C-C SER-B SER-C 4
RE6A258*DA L, #3/4 L, #2-1/2 SBFSE-B-C SBFSE-C-C SER-B SER-C 6
R407A/ R448A/ R449A/B†
RE6A041*DA L, #1/6 L, #1/2 SBFDE-AAA-C SBFDE-AA-C SER-AA SER-AA 2
RE6A070*DA L, #1/4 L, #3/4 SBFDE-AA-C SBFDE-A-C SER-A SER-A 2
RE6A084*DA L, #1/3 L, #3/4 SBFDE-AA-C SBFDE-A-C SER-A SER-A 2
RE6A104*DA L, #1/2 L, #1 SBFDE-A-C SBFDE-A-C SER-A SER-B 4
6
RE6A128*DA L, #1/2 L, #1-1/2 SBFDE-A-C SBFDE-A-C SER-A SER-B 4
FPI
RE6A141*DA L, #1/2 L, #1-1/2 SBFDE-A-C SBFDE-B-C SER-B SER-B 4
RE6A169*DA L, #3/4 L, #1-1/2 SBFDE-A-C SBFDE-B-C SER-B SER-B 4
RE6A204*DA L, #3/4 L, #2 SBFDE-B-C SBFDE-B-C SER-B SER-B 4
RE6A258*DA L, #1 L, #2-1/2 SBFDE-B-C SBFDE-C-C SER-B SER-C 6

See notes on page 7.

 7

LOW HEIGHT UNIT COOLER

Distributor Nozzle - Electric Defrost Models
Part Numbers Number
Model
Nozzle @ Liq. Temp. TXV^ @ Liq. Temp. EEV @ Liq. Temp. of
Number
50°F 100°F 50°F 100°F 50°F 100°F Circuits
R404A
RE6E037DDA L, #1/4 L, #3/4 SBFSE-AA-ZP SBFSE-AA-ZP SER-AA SER-AA 2
RE6E045DDA L, #1/3 L, #3/4 SBFSE-AA-ZP SBFSE-AA-ZP SER-AA SER-A 2
RE6E075DDA L, #3/4 L, #1-1/2 SBFSE-A-ZP SBFSE-A-ZP SER-A SER-A 4
RE6E089DDA L, #3/4 L, #1-1/2 SBFSE-A-ZP SBFSE-A-ZP SER-A SER-B 4
6 RE6E108DDA L,#1 L, #2 SBFSE-A-ZP SBFSE-B-ZP SER-A SER-B 4
FPI RE6E125DDA L,#1 L, #2 SBFSE-A-ZP SBFSE-B-ZP SER-A SER-B 4
RE6E137DDA L,#1 L, #2-1/2 SBFSE-A-ZP SBFSE-B-ZP SER-B SER-B 4
RE6E182DDA L, #1-1/2 L, #3 SBFSE-B-ZP SBFSE-C-ZP SER-B SER-B 8
RE6E221DDA L,#2 L, #4 SBFSE-B-ZP SBFSE-C-ZP SER-B SER-C 8
RE6E278DDA G,#2 G, #5 SBFSE-C-ZP SBFSE-C-ZP SER-C SER-C 12
RE4E037DDA L, #1/4 L, #3/4 SBFSE-AA-ZP SBFSE-AA-ZP SER-AA SER-AA 2
RE4E075DDA L, #3/4 L, #1-1/2 SBFSE-A-ZP SBFSE-A-ZP SER-A SER-A 4
4 RE4E107DDA L,#3/4 L, #2 SBFSE-A-ZP SBFSE-B-ZP SER-A SER-B 4
FPI RE4E149DDA L, #1-1/2 L, #2-1/2 SBFSE-A-ZP SBFSE-B-ZP SER-B SER-B 8
RE4E186DDA L,#2 L, #3 SBFSE-B-ZP SBFSE-C-ZP SER-B SER-C 8
RE4E234DDA G,#2 G, #4 SBFSE-C-ZP SBFSE-C-ZP SER-B SER-C 12
R407A/ R448A/ R449A/B†
RE6E037DDA L, #1/4 L, #1/2 SBFDE-AA-ZP SBFDE-AA-ZP SER-AA SER-AA 2
RE6E045DDA L, #1/3 L, #3/4 SBFDE-AA-ZP SBFDE-AA-ZP SER-AA SER-AA 2
RE6E075DDA L, #3/4 L, #1 SBFDE-A-ZP SBFDE-A-ZP SER-A SER-A 4
RE6E089DDA L, #3/4 L, #1-1/2 SBFDE-A-ZP SBFDE-B-ZP SER-A SER-A 4
6 RE6E108DDA L, #3/4 L, #1-1/2 SBFDE-A-ZP SBFDE-B-ZP SER-A SER-B 4
FPI RE6E125DDA L, #1 L, #2 SBFDE-A-ZP SBFDE-B-ZP SER-A SER-B 4
RE6E137DDA L, #1 L, #2 SBFDE-B-ZP SBFDE-B-ZP SER-A SER-B 4
RE6E182DDA L, #1-1/2 L, #2-1/2 SBFDE-B-ZP SBFDE-C-ZP SER-B SER-B 8
RE6E221DDA L, #1-1/2 L, #3 SBFDE-B-ZP SBFDE-C-ZP SER-B SER-C 8
RE6E278DDA G, #2 G, #4 SBFDE-C-ZP SBFDE-C-ZP SER-B SER-C 12
RE4E037DDA L, #1/4 L, #1/2 SBFDE-AA-ZP SBFDE-AA-ZP SER-AA SER-AA 2
RE4E075DDA L, #3/4 L, #1 SBFDE-A-ZP SBFDE-A-ZP SER-A SER-A 4
4 RE4E107DDA L, #3/4 L, #1-1/2 SBFDE-A-ZP SBFDE-B-ZP SER-A SER-B 4
FPI RE4E149DDA L, #1-1/2 L, #2-1/2 SBFDE-B-ZP SBFDE-B-ZP SER-B SER-B 8
RE4E186DDA L, #1-1/2 L, #2-1/2 SBFDE-B-ZP SBFDE-C-ZP SER-B SER-B 8
RE4E234DDA G, #2 G, #4 SBFDE-C-ZP SBFDE-C-ZP SER-B SER-C 12

Distributor lines are 3/16” diameter and 14” long. Distributor connection size is 1/2” for all Air Defrost models.
Distributor lines are 3/16” diameter and 14” long. Distributor connection size is 1/2” for Electric Defrost models with “L”
nozzle and 7/8” for models with “G” nozzle.
* Asterisk represents a variable character based on motor ordered. See page 2 for nomenclature.
– Single feed circuit coils do not get a distributor/nozzle.
^ TXV selections for Air Defrost models are based on +25°F suction temp., 8°F to 12°F evaporator TD. Contact factory for
operating conditions outside of this range.
^ TXV selections for Electic Defrost models are based on -20°F suction temp., 8°F to 12°F evaporator TD. Contact factory for
operating conditions outside of this range.
† SBFDE expansion valves are compatible with R407A, R448A and R449A/B. For other refrigerants, follow manufacturers
selection guidelines.
If unit is not configured with a factory installed TXV, unit will include shipped-loose nozzles sized for 100°F liquid temperature.
8

CENTER MOUNT
Specifications
Refrigerant Approx.
No. of Dimensions (Inches)
Connections Weight (Lbs.)
Model TXV† Hanger
Number Type Liquid Slot
Suction Locations Length Width Height Figure Net Ship
Line1

Air Defrost Models

RE6A041D*A EXT 3/8 5/8 2 32 28-3/8 11-1/4 1 55 190
RE6A070D*A EXT 3/8 5/8 3 52 28-3/8 11-1/4 2 75 210
RE6A084D*A EXT 3/8 5/8 3 52 28-3/8 11-1/4 2 80 215
RE6A104D*A EXT 3/8 5/8 4 72 28-3/8 11-1/4 3 95 230
6
RE6A128D*A EXT 3/8 7/8 4 72 28-3/8 11-1/4 3 105 240
FPI
RE6A141D*A EXT 3/8 7/8 5 92 28-3/8 11-1/4 4 120 280
RE6A169D*A EXT 3/8 7/8 5 92 28-3/8 11-1/4 4 130 290
RE6A204D*A EXT 3/8 1-1/8 6 112 28-3/8 11-1/4 5 145 330
RE6A258D*A EXT 3/8 1-1/8 6 112 28-3/8 13-3/4 6 155 340
Electric Defrost Models
RE6E037DDA EXT 3/8 5/8 2 32 28-3/8 11-1/4 1 50 185
RE6E045DDA EXT 3/8 5/8 2 32 28-3/8 11-1/4 1 55 190
RE6E075DDA EXT 3/8 5/8 3 52 28-3/8 11-1/4 2 75 210
RE6E089DDA EXT 3/8 5/8 3 52 28-3/8 11-1/4 2 80 215
6 RE6E108DDA EXT 3/8 7/8 4 72 28-3/8 11-1/4 3 95 230
FPI RE6E125DDA EXT 3/8 7/8 4 72 28-3/8 11-1/4 3 105 240
RE6E137DDA EXT 3/8 7/8 5 92 28-3/8 11-1/4 4 120 280
RE6E182DDA EXT 3/8 7/8 5 92 28-3/8 11-1/4 4 130 290
RE6E221DDA EXT 3/8 1-1/8 6 112 28-3/8 11-1/4 5 145 330
RE6E278DDA EXT 3/8 1-1/8 6 112 28-3/8 13-3/4 6 155 340
RE4E037DDA EXT 3/8 5/8 2 32 28-3/8 11-1/4 1 55 190
RE4E075DDA EXT 3/8 5/8 3 52 28-3/8 11-1/4 2 80 215
4 RE4E107DDA EXT 3/8 7/8 4 72 28-3/8 11-1/4 3 105 240
FPI RE4E149DDA EXT 3/8 7/8 5 92 28-3/8 11-1/4 4 130 290
RE4E186DDA EXT 3/8 1-1/8 6 112 28-3/8 11-1/4 5 145 330
RE4E234DDA EXT 3/8 1-1/8 6 112 28-3/8 13-3/4 6 155 340
* Asterisk represents a variable character based on voltage ordered. See page 2 for nomenclature.
† Externally equalized.
1 For units with mounted TXV components. See Nozzle/TXV table for distributor connection size when TXV is field installed.

Applications
 9

LOW HEIGHT UNIT COOLER

Physical Dimensions
Figure 1 - Single Fan
Bottom View End View
28-3/8

AIR AIR

27-1/4
Notes:
• Measurements noted on the end view
drawing are the same for all units.
• All mounting holes are 3/8” diameter.
POWER • Mounting holes on four and five fan units
AND are located 20” on center at each tube
3/8
CONTROL sheet.
PANEL SUCTION LIQUID
• All dimensions are in inches.
Side View
3/4 2

6-3/8
6-3/8 11-1/8

6 KNOCKOUTS
(4) SIDE 3/4 X 1/2
(2) TOP NPT DRAIN

Figure 2 - Two Fan

Bottom View
7 19 19 7

27-1/4

POWER
AND
CONTROL 3/8
PANEL SUCTION LIQUID
Side View 2
3/4

6-3/8
6-3/8 11-1/8

6 KNOCKOUTS
(4) SIDE 3/4 X 1/2
(2) TOP NPT DRAIN
10

CENTER MOUNT
Physical Dimensions
Figure 3 - Three Fan
Bottom View

7 19 20 19 7

27-1/4

POWER
AND
CONTROL 3/8
PANEL
SUCTION LIQUID
Side View 2
3/4

NOTE:
MOUNTING HOLES ON 4 FAN AND LARGER ARE
6-3/8
6-3/8 11-1/8
LOCATED 20” ON CENTER AT EACH TUBE SHEET.

6 KNOCKOUTS
(4) SIDE 3/4 X 1/2
(2) TOP NPT DRAIN

Figure 4 - Four Fan

Bottom View

7 19 20 20 19 7

27-1/4

POWER
AND 3/8 SUCTION LIQUID
CONTROL
PANEL

Side View
3/4 2

6-3/8
6-3/8 11-1/8

6 KNOCKOUTS
(4) SIDE 3/4 X 1/2
(2) TOP NPT DRAIN
 11

LOW HEIGHT UNIT COOLER

Physical Dimensions
Figure 5 - Five Fan
Bottom View
112
7 19 20 20 20 19 7

27-1/4

POWER
AND 3/8 SUCTION LIQUID
CONTROL
PANEL

Side View
3/4 2

6-3/8
6-3/8 11-1/8

6 KNOCKOUTS
(4) SIDE 3/4 X 1/2
(2) TOP NPT DRAIN

Figure 6 - Five Fan Tall

Bottom View

27-1/4

POWER
AND 3/8
CONTROL
PANEL SUCTION LIQUID

Side View
3/4 2

8-7/8 8-7/8 13-5/8

6 KNOCKOUTS
(4) SIDE 3/4 X 1/2
(2) TOP NPT DRAIN
CENTER MOUNT UNIT COOLER

Russell’s Center Mount Unit Cooler can be used in

combination with Next-Gen MiniCon Condensing Units to
provide complete refrigeration solutions for
small to medium walk-ins

Due to continuing product development, specifications are subject to change without notice.

201 Thomas French Drive, Scottsboro, AL 35769 • PHONE (256) 259-7400 • FAX (256) 259-7478 • russell.htpg.com
E-mail or call us for help: [email protected] or 1-855-HTPARTS (1-855-487-2787)