Scribd
Upload
61 views

Infinity USB Phoenix - Infmanual

Uploaded by

jbidouillelivefr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views

Infinity USB Phoenix - Infmanual

Uploaded by

jbidouillelivefr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

WBelectronics

Infinity USB Phoenix - Users manual


Introduction Hardware installation

Thank you for buying an Infinity USB Phoenix is connected and powersupplied
Infinity USB Phoenix from WB Electronics! by a PC thru a USB1.1 or USB2.0 compatible port or
hub. The USB connection is always necessary, even if
Installing the Infinity USB Phoenix requires 3 simple the Infinity USB is only used in Phoenix mode.
steps:
To use the Phoenix mode, an additional serial-cable
1) Connect hardware (page 3) must be connected to the PC. If the Phoenix features
2) Install driver (page 4-7) are not needed, the serial connection is not
3) Install software (page 8) necessary. A standard 9-9 male-female straight-thru
cable can be used.
Even though the Infinity USB software has been
designed to be as intuitive and easy to use as
possible, a small quickstart guide has been included
on page 9. (Ser
The newly introduced Phoenix mode is described on ial p
ort)
page 10. (USB
por
t)

For software updates, support, product descriptions After the hardware has been connected for the first
and other information, please visit: time, the blue LED wil start flashing to show that the
programmer is connected to the PC, but the driver
has not yet been installed or loaded.
www.infinityusb.com

2 3
Driver installation Driver installation

Windows 98 installation Windows ME installation

1) Click [Next] 1) Insert the WB driver/software CD


Select [Search for the best driver
for your device]
2) Select [Search for best driver for Click [Next]
your device]
Click [Next]

3) Insert the WB driver/software CD 2) Click Finish


Select [CD-ROM drive]
Click [Next]

4) Click [Next]

5) Click [Finish]

4 5
Driver installation Driver installation

Windows 2000 installation Windows XP installation

1) Click [Next] 1) Select [Install from a list or specific


location]
Insert the WB driver/software CD
2) Select [Search for a suitable driver Click [Next]
for my device]
Click [Next] 2) Select [Search for the best driver
in these locations]
3) Insert the WB driver/software CD Select [Search removable
Select [CD-ROM drive] media..]
Click [Next] Click [Next]

3) Click [Continue anyway]


4) Click [Next]

5) Click [Finish] 4) Click [Finish]

6 7
Software installation Quickstart guide

Software installation is common for all operating Programming a card requires only 3 steps:
systems:
1) Insert the card in the cardreader, and make sure
1) Insert the CD in the CD-ROM drive. the right card is selected in the combobox.
2) Run setup.exe on the CD
3) Click the Infinity USB Phoenix icon 2) Load one or more files by pressing the open icons.

The Infinity USB Phoenix setup program will then 3) Press the large Write button (not the small part with
initiate. the arrow) to write the card.

Choose an install location (or pick the default


location). You have the option of creating a shortcut
to Infinity USB on your desktop or in the Quick Launch
bar.
Once setup is complete you can choose to launch
Infinity USB by clicking Finish.

Visit www.infinityusb.com for further programming


instructions.
8 9
Phoenix mode Phoenix mode

To use the Phoenix mode of Infinity USB, a serial cable All software supporting a COM-port can now be used
must be attached from the programmer to the PC. for communicating with the smartcard.
All 3rd party software will use this COM-port for
communication. If the Infinity USB Phoenix hardware is mostly used in
Phoenix mode (or if Phoenix mode is needed before
Phoenix mode is entered by pressing the Phoenix the software is loaded for instance for password
button on the main window. You’ll be prompted to control), it’s possible to setup the Infinity USB Phoenix
choose between a frequency of 3.58, 3.68 or this way.
6.00Mhz, and either Phoenix or Smartmouse mode.

Pressing [enable] will make the red LED light, to show Enter the Phoenix-tab in the options | general menu,
the programmer is in Phoenix mode. At the same and choose the needed Phoenix / Smartmouse
time, the program will be minimized to tray. mode. Upon power-up of the hardware, the chosen
mode will immediatly be entered.
It is ofcourse possible to exit this mode again, simply
start up the software and choose exit phoenix mode.
10 11
Do not use this product for any other purpose than
the intended. Under no circumstances including
negligence, shall WB Electronics ApS be liable to you
for any incidental, indirect, speciel or consequential
damages (including property damage) arising from
the use or misuse of this software.

Copyright © 2002-2003 by WB Electronics ApS

The software is exclusively for use with WB Electronics


ApS products. The software must not be altered or
modified in any way.

You might also like