0% found this document useful (0 votes)
47 views2 pages

Zchek f9w Pds

Uploaded by

Will Smith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
47 views2 pages

Zchek f9w Pds

Uploaded by

Will Smith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

F9W-Water based

PRODUCT DATA SHEET


Fluorescent Powder for Wet Method Magnetic
Particle Inspection
DESCRIPTION
ZChek F9W is a Green Colored water based Magnetic Particle Powder designed to be
fluorescing Bright Green under UV Light. ZChek F9W consists of high sensitivity particles
for detection of very fine discontinuities in Ferromagnetic materials. Using the state-of-the-
art encapsulation technology, ZChek F9W is manufactured to exhibit excellent properties
(High permeability, low retentivity, high mobility and optimum particle distribution)
required for high sensitive fluorescent MPI process. Special additives in F9W provide
excellent particle mobility in water medium and avoid flash rusting of parts.
CONFORMANCE / SPECIFICATION COMPLIANCE
• ASME B &PV Code, Sec V
• AMS 3044
• ASTM E 1444
• ASTM E 709
• EN ISO 9934-2

APPLICATIONS

ZChek F9W is designed to detect medium to fine surface and slightly subsurface
discontinuities like inclusions, seams, shrink cracks, tears, laps, flakes, welding defects,
grinding cracks, quenching cracks, and fatigue cracks in raw forgings, castings( during
preliminary stage ), auto components(machining cracks, grinding cracks, heat treatment
cracks), fabrication, steel making (billets and bars), surface transportation, oil and gas and
all applications which involve further processing like machining and oiling.
TYPICAL PROPERTIES

Color Under White Light Green


Color Under Black Light Bright Green Fluorescence
Mean Particle Size 9- 14 Microns
Particle Size Range 1-20 Microns
Sensitivity 7 ( Ketos Ring )
Max. Operating Temperature 49°C Maximum
Settling volume 0.05-0.15 ml
DIRECTIONS FOR USE

• Use F9W at 10.75 – 11 grams per litre. Run the pump for 15 minutes before testing.
• Check the concentration before use at least once each day using centrifuge tube.
• Parts should be clean and dry prior to testing.
• The bath must be under continuous agitation
• Using the wet continuous method, the bath is applied to all surfaces of the part. The
instant the bath stream is removed from the part the magnetizing current is applied.
PACK SIZES
1 kg X 4 Nos-1 Carton box
HEALTH & SAFETY
Information on Health & Safety is made available through Material Safety data sheets and
the same can be reviewed through the company’s website www.zchem.in
STORAGE & SHELF LIFE
Packed Powders have a shelf life of 5 years if unopened and stored as per ZChem
Recommendations
Manufactured By:

ZChem Specialities Pvt Ltd


Sy,No. 11/2/6, Puradapalya Village, Tavarekere Hobli, Bangalore – 562130, India
Phone +917349177755 & +917349277755 Email – [email protected] , Website – www.zchem.in
Disclaimer: We have taken best care to ensure that the information provided in this data sheet is accurate.
Our product is guaranteed to conform to the specifications provided. We make no other warranty; hence the
liability is limited to replacement of product only.
Doc. No.PDS/002/B-Oct-21

You might also like