12
Grooved Resilient OS&Y
Gate Valve (XZ81X),
UL/FM Approved
0C3073.7
MATERIAL SPECIFICATION
Part No. Part Standard Specification Options
1 Valve Body ASTM A536, 65-45-12
2 Resilient Wedge Disc ASTM A536, 65-45-12+EPDM
XZ81X
3 Stem Stainless Steel AISI 304, AISI 316, AISI 420, AISI 431
4 Bonnet Gasket EPDM NBR
5 Bonnet ASTM A536, 65-45-12
qConnection Ends: Groove to AWWA C606 6 Washer Brass HPb59-1
qWorking Pressure: 300PSI 7 Yoke ASTM A536, 65-45-12
200PSI and 250PSI available upon request 8 Stem Bushing Brass HPb59-1
9 Gland ASTM A536, 65-45-12
qTemperature Range: 0ȭ- 100ȭ
10 Stem Nut Brass HPb59-1 Bronze ZQSn5-5-5
qCoating: Fusion Bonded Epoxy Coating in accordance with
11 Handwheel ASTM A536, 65-45-12 Pressed Steel
ANSI/AWWA C550 or painting upon request
12 Washer Brass HPb59-1
13 Gland Nut Carbon Steel Zinc Plated AISI 304, AISI 316
14 Stud Carbon Steel Zinc Plated AISI 304, AISI 316
15 Flat Washer Carbon Steel Zinc Plated AISI 304, AISI 316
16 Nut Carbon Steel Zinc Plated AISI 304, AISI 316
17 O-Ring NBR EPDM
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
Size 2"~3" with 1pc of 3/8" bronze NPT tapping plug, size 4"~5" with 1pc of 1/2" bronze NPT tapping plug, size
6"~12 with 1pc of 3/4" bronze NPT tapping plug.
DN Dimensions(mm)
Inch mm L H1(Close) H2(Open) OD d A B
2" 50 178 348 400 60.3 57.15 15.88 7.92
2.5" 65 190 373 440 73 69.09 15.88 7.92
3" 80 203 408 490 88.9 84.94 15.88 7.92
4" 100 229 471 573 114.3 110.08 15.88 9.52
5" 125 254 541 665 141.3 137.03 15.88 9.52
6" 150 267 601 755 168.3 163.96 15.88 9.52
8" 200 292 774 975 219.1 214.4 19.05 11.13
10" 250 330 1029 1283 273 268.28 19.05 12.7
12" 300 356 1065 1370 323.9 318.29 19.05 12.7
