Technical Education and Skills Development Authority

(INSTITUTION)

TRAINEE’S RECORD BOOK

I.D
3
2x2

Trainee’s No. ____________

NAME: ________________________________

QUALIFICATION: __________________________

TRAINING DURATION: ____________________

TRAINER: ________________________________
Instructions:
This Trainees’ Record Book (TRB) is intended to serve as record of all
accomplishment/task/activities while undergoing training in the industry. It
will eventually become evidence that can be submitted for portfolio assessment
and for whatever purpose it will serve you. It is therefore important that all its
contents are viably entered by both the trainees and instructor.
The Trainees’ Record Book contains all the required competencies in
your chosen qualification. All you have to do is to fill in the column “Task
required” and “Date Accomplished” with all the activities in accordance with
the training program and to be taken up in the school and with the guidance of
the instructor. The instructor will likewise indicate his/her remarks on the
“Instructors Remarks” column regarding the outcome of the task accomplished
by the trainees. Be sure that the trainee will personally accomplish the task
and confirmed by the instructor.
It is of great importance that the content should be written legibly on ink.
Avoid any corrections or erasures and maintain the cleanliness of this record.
This will be collected by your trainer and submit the same to the
Vocational Instruction Supervisor (VIS) and shall form part of the permanent
trainee’s document on file.

THANK YOU.

NOTES:

__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
 Unit of Competency:
NC Level: ___
Learning Task/Activity Required Date Instructors
Outcome Accom- Remarks
plished
Install 1.1 Interpret electrical wiring diagrams
electrical and mechanical drawings
metallic 1.2 Identify proper usage and types of
/nonmetallic conduits, fittings in electrical
(PVC installation.
conduit) 1.3 Identify technique of installation
and bending of conduit and fitting.
1.4 Apply proper usage of safety
harness.
1.5 Interpret plan and details drawing.
1.6 Practice proper handling of
materials, tools and equipment
1.7 Practice procedure in proper
bending of conduit
1.8 Practice procedure in proper
bending of conduit
1.9 Perform the installation
economically
Install wire 2.1 Identify use of materials, tools and
ways and equipment
cable tray 2.2 Interpret electrical/mechanical
drawing
2.3 Determine suitability for
installation and used of bus way,
cable tray, fittings and panels,
conformity with the provision of
the PEC Code.
2.4 Proper uses and installation of
wire ways and cable trays
2.5 Proper use of safety harness (PPE)
2.6 Interpret technical plan
2.7 Use effective communication skills
(written and oral )
2.8 Practice effective use of measuring
tape
2.9 Perform the installation
economically
Install 3.1 Learn and apply mensuration
auxiliary 3.2 Determine blue print reading and
terminal materials specification
cabinet and 3.3 Read proper proofing standard
distribution 3.4 Proper procedure in installation of
panel auxiliary terminal cabinet and
distribution panels.
3.5 Proper use of safety harness and
PPE
3.6 Interpret technical plan
3.7 Practice effective use of measuring
devices
3.8 Practice proper handling of tools
and equipment
3.9 Install terminal cabinet and
distribution panel
3.10 Perform the installation
economically
Prepare for 4.1 Read and familiarize: mensuration,
cable pulling blue print reading and materials
and specification, uses of wires,
installation cables and tools, required sizes
of cable based on PEC Wire Table
4.2 Prepare cable for installation
4.3 Interpret technical plan and
drawing
4.4 Practice effective use of measuring
tapes
4.5 Practice proper handling of tools
and equipment
4.6 Apply methods and techniques in
various type of wiring wires and
cables
Perform 5.1 Read and familiarize: Mensuration,
wiring and Blue print reading and materials
cabling lay specification, Application of
out pulling compound, Methods in
cable pulling
5.2 Interpret technical plan and
drawing
5.3 Apply methods in cable pulling
5.4 Follow procedures in bending
radius and loop tolerances for
cables.
Notify 6.1 Describe processes, Operations
completion of Systems
work - Maintenance of tools & materials
- Storage of tools
6.2 Check and conform the
installation based on job
requirement
6.3 Practice good housekeeping
6.4 Perform commissioning activities

__________________ ___________________
Trainee’s Signature Trainer’s Signature
Unit of Competency:
NC Level: __
Learning Task/Activity Required Date Instructors
Outcome Accom- Remarks
plished
Plan and 1.1 Read familiarize:
prepare work  Types of protective devices
and its application
 Identification of standard
drawing based on standard
(ANSI or IEC
 Protective devices
specifications and ratings)
1.2 Interpret plans and detail
drawings
1.3 Describe proper handling of
materials, tools and equipment
1.4 Check and quantify item as
needed in the job requirement
1.5 Apply active and non-active test to
ensure its functionality of the
devicess
Install 2.1 Read and familiarize:
electrical  Guidelines Governing
protective Occupational Safety and
devices Health in the Construction
Industry
 Types and usage of
different electrical protective
devices
2.2 Perform procedures for installation
of electrical protective devices
2.3 Perform selection of electrical
protective devices as per job
requirements
2.4 Practice good house keeping
2.5 Apply methods and techniques in
various types of protective devices
and lighting protection and
grounding system
2.6 Terminate and mount devices
2.7 Check and conform the
installation based on job
 requirement
2.8 Perform the installation
economically
Install 3.1 Read and familiarize:
lighting  Guidelines Governing
fixture and Occupational Safety and
auxiliary Health in Construction
outlet Industry
 Types and usage of
different lighting fixture and
auxiliary outlet
3.2 Perform procedures for installation
of lighting fixture and auxiliary
outlet
3.3 Perform selection of lighting fixture
and auxiliary outlet as per job
requirements
3.4 Practice good house keeping
3.5 Interpret plans and details
3.6 Practice proper handling of
materials, tools and equipment
3.7 Apply methods and techniques in
various types of lighting fixture
and auxiliary outlet
3.8 Check and conforming the
installation based on job
requirement
Notify 4.1 Describe Process, Operation
completion of Systems
work  Maintenance of tools &
materials
 Storage of tools
4.2 Check and conform the
installation based of the job
requirement
4.3 Practice good house keeping
4.4 Perform commissioning activities

___________________ ______________________
Trainee’s Signature Trainer’s Signature