Scribd
Upload
28 views

Elite (Snap-In) GL Series

The document describes specifications for aluminum electrolytic capacitors in the GL Series, including operating temperature range, working voltage range, capacitance range and tolerance, dissipation factor, leakage current, endurance, shelf life, permissible ripple current, and dimensions.

Uploaded by

zuigh899g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

Elite (Snap-In) GL Series

The document describes specifications for aluminum electrolytic capacitors in the GL Series, including operating temperature range, working voltage range, capacitance range and tolerance, dissipation factor, leakage current, endurance, shelf life, permissible ripple current, and dimensions.

Uploaded by

zuigh899g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

A L U M I N U M E L E C T R O LY T I C C A PA C I T O R S

GL Series
Load life 1,000 hours at 85℃.
Designed for high grade audio equipment, giving priority
to high fidelity sound quality.
SPECIFICATIONS
Item Performance Characteristics
Category Temperature Range -40 ~ +85℃
Working Voltage Range 50 ~ 100Vdc
Capacitance Range 6,800 ~ 22,000 μF
Capacitance Tolerance ±20% (at 25℃ and 120Hz)

Dissipation Factor Rated Voltage (V) 50 63 80 100


(tanδ) tanδ(Max) 0.30 0.30 0.25 0.25
(at 25℃, 120Hz)
The above values should be increased by 0.02 for every additional 1000uF

I=3 CV or 3,000 μA whichever is smaller.


Leakage Current
I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.
The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated
voltage applied for 1,000 hours at 85℃.
Capacitance change ≦ ±20% of the initial value
Endurance
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ specified value

The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated
voltage applied for 500 hours at 85℃ without voltage applied.
Capacitance change ≦ ±20% of the initial value
Shelf Life
Dissipation factor(tanδ) ≦ 200% of the specified value
Leakage current ≦ 200% of the specified value

Others Conforms to JIS-C-5101-4 (1998), characteristic W.

DIMENSIONS (mm)

ФD 35 40 51 64
P±1 14 14 18 25
A L U M I N U M E L E C T R O LY T I C C A PA C I T O R S

GL Series
Case size & Permissible rated ripple current (mA rms) 120Hz / 85℃:
Vdc
50 63
ФD
Ф35 Ф40 Ф51 Ф35 Ф40 Ф51
uF
ФD×L RC ФD×L RC ФD×L RC ФD×L RC ФD×L RC ФD×L RC

6800 35×80 4300

10000 35×80 4600 40×80 4900

15000 40×80 6100 40×100 6700

22000 51×80 8300 51×100 9100

Vdc
80 100
ФD
Ф40 Ф51 Ф64 Ф40 Ф51 Ф64
uF
ФD×L RC ФD×L RC ФD×L RC ФD×L RC ФD×L RC ФD×L RC

6800 40×100 6100 51×80 6200

10000 51×80 6200 51×100 6900

15000 51×100 8400 64×80 8700

22000 64×100 11600

RIPPLE CURRENT MULTIPLIERS


Frequency Multipliers
Frequency (Hz)
Vdc
60 120 1K 10K
50 ~ 100 0.82 1.00 1.35 1.40

You might also like