Rad Catalog 2023
Rad Catalog 2023
Catalog
RAD Headquarters
North American Headquarters
900 Corporate Drive, Mahwah, NJ 07430, USA
Tel 1-201-529-1100 | Toll free 1-800 -444-7234 | Fax 1-201-529-5777
Email [email protected]
International Headquarters
24 Raoul Wallenberg Street, Tel Aviv 6971923, Israel
Tel 972 -3-6458181
Email [email protected]
www.rad.com
Specifications are subject to change without prior notification. The RAD name and logo
are registered trademarks of RAD Data Communications Ltd. RAD product names are
trademarks of RAD Data Communications Ltd. ©2023 RAD Data Communications.
All rights reserved. Catalog number 802756, Version 01/23
Table of Contents
Utility Communications:
Business Services Multiservice Operational WAN ............................ 18
Carrier Ethernet for L2 VPNs .......................... 6
Transportation
Double Fiber Capacity...................................... 7
Highway Communications .................................. 19
Smart Diagnostics for CSP Customer Care ....... 8
Train and Metro Communications:
Threat Intelligence for CSP Network and
Operational WAN ................................................ 20
Customer Security ........................................... 9
Air-Traffic Control Communications:
Personalized Targeting for CSP Marketing ...... 10
Multiservice Operational WAN ............................. 21
IP Traffic Encryption ...................................... 11
Wholesale Services
Wholesale Networking
E-Access
DSLAM ETX-2i-100G
1/10/100-GbE ETX
MiNID
1-GbE
25/100-GbE
ETX ETX
1/10/100-GbE
Your Benefits:
• Provide wholesale Carrier Ethernet • Provide SLA-based backhaul all the • Seamless connection between
transport services to multiple service way to the end-customer site, cell networks with 1-GbE, 10-GbE and
providers with complete visibility and site or POP 100G E-NNI interfaces with optional
controlled service hand-off between • MEF-certified Carrier Ethernet 3.0 redundancy
multiple networks E-Access support with single-CoS • Double fiber capacity while avoiding
• Demarcation for business and mobile and/or multiple-CoS EVC/OVC for costly new fiber/transceiver
services, and broadband access node standards-based carrier-to-carrier deployments with BiDi QSFP 100G
(e.g., DSLAM) backhaul over the connectivity adaptors
same transport network • Support 5G convergence for
wholesale services
Remote Offices
ETX-2 ETX
G.8032
Rings
Data Center
Cloud/Data Center
RADview
MiNID
GbE
ETX ETX
GbE
L2 & L3
Services HQ
GbE
ETX
4G/5G n x 10-GbE/
(L2 over IP)
100-GbE
4G/5G
ETX with 4G/5G
PE
Service Assurance
Your Benefits:
• Easily plan, deploy, provision, • MEF 3.0-certified with standard • Enhanced service provisioning,
and maintain SLA-based business NETCONF/YANG northbound visibility and reporting using
services over any access: fiber/ interfaces RADview Service Manager and
copper/TDM/mobile • Cost-effective aggregation RADview Performance Monitoring
• Carrier Ethernet demarcation and with dynamic edge support for portal
aggregation switch up to 100G monitoring and policing • Double fiber capacity while
avoiding costly new
fiber/transceiver deployments
with BiDi QSFP 100G adaptors
Business Services
NE W
Your Benefits:
• Immediately double network • Unique patented technology, easy • Avoid costly new fiber/transceiver
capacity by turning dual to single to deploy and works with any deployments
fiber standard transceiver • Ideal for 100G access/aggregation
• 50% fiber savings with quick ROI, • Compact; no need for additional over own/rented dark fiber, short
freeing up fiber for other needed power source, low light loss haul connectivity, data center
services connectivity, xHaul
NE W
Your Benefits:
• New SaaS solution provides CSP network (WAN) and Internet/ • AI/ML-driven analytics provide
end-to-end diagnostics beyond cloud insightful feedback for next best
traditional performance monitoring • Users view diagnostics for network action
tools degradation and root cause • Leverage EAD/NID/NTE installed
• Insightful on-the-spot diagnostic connectivity segments based on base – does not require SW agents
tools to troubleshoot L2 demarcation point analytics from or probes
connectivity issues for fast ticket the edge • Supports all customer LAN
resolution • QoS scores provided based on the technologies
• Minimizes the need for escalation history of a connectivity problem
to operations and reduces OpEx over time (evolution, persistence)
• End-to-end visibility of connectivity as well as severity on top of
path health across customer LAN, network KPI analytics
RADinsight SD ETX-2/ETX-2i
On-Demand Smart 1G/10G/100G Carrier
Diagnostics Service Ethernet Demarcation
Business Services
NE W
Your Benefits:
• Two-way (inbound and outbound) • Effectively protects CSP networks • Modular, cost-effective solution
DDoS protection solution and customers against command to complement existing security
leveraging EAD/NID installed base; and control attacks at first portfolio and extend customer
does not require on-premise demarcation point offerings
appliance or traffic rerouting
• Effective in dealing with multi-
vector and low-volume attacks
RADinsight TI ETX-2/ETX-2i
On-Demand Threat 1G/10G/100G Carrier
Intelligence Service Ethernet Demarcation
NE W
Your Benefits:
• Generates new revenue via • Increases customer loyalty
upselling solutions to relevant • Leverages EAD/NID installed
customers, such as bandwidth base – the only place the
upgrades or premium cloud relevant data resides
connect services
RADinsight PT ETX-2/ETX-2i
On-Demand Personalized 1G/10G/100G Carrier
Targeting Service Ethernet Demarcation
IP Traffic Encryption
Business Services
NE W
Your Benefits:
• End-to-end static transport mode • Easy plug-and-play into standard departments
IPsec encryption MSA SFP ports of switches, • CypherPlug keeps the keys secret,
• Seamless security enhancement routers, DSLAMs and mobile base without exposing them to field
for existing deployments using an stations technicians
SFP sleeve • Powerful FPGA design for • Allows OpEx savings by eliminating
• Traffic encryption without changing wire-speed encryption the need for external power
network gear and structure • Encryption key allocation allows and reducing space and cabling
service isolation between expenses
NE W
Services
Application
Versatile Container-Based Backhaul Protocols Server
WiFi Sensors Interfaces Edge Computing IP/MQTT/Modbus/IEC 104/DNP3/BACnet
ETH RADview+SIEM
Access Secure Serial SecurityGateway
Control Comm. Fiber IT/OT
WiFi PSN Network
LTE
LoRa
Network Server
Display SecFlow LTE
Boards PLC IoT-GW
Public Cellular
Network
Meter Aggregators
Your Benefits:
• Offer competitive IoT services for • Seamless communications over • Transparent delivery of SCADA,
monitoring and automation devices fiber optics, radio links and protocol conversion and terminal
• Virtual environment for user- 2G/3G/4G/5G cellular links server
tailored applications allows • Secure remote access for end-user • Complies with IEC 61850-3 and
customers to add new applications device management IEEE 1613 environmental standards
on top of SecFlow devices • LoRaWAN gateway functionality
• Zero-touch provisioning, enhanced reduces the number of devices in
cyber security (IPsec, PKI, FW, the network
IDS/IPS, SIEM)
Business Services
TDM Migration
Remote Offices
PBX/
Phones
E1/T1/FXS/
E&M
ETX/
RTU Megaplex-1
X.21/ RADview
RS-232 GbE
SDH/ 10-GbE
SONET
Your Benefits:
• Maintain legacy TDM services • Support heterogenic First Mile • Allow a single transport network
over new packet network to keep footprint requiring CPE support for IP/Ethernet and TDM services
revenue flow and customer loyalty for DSL/EFM, Ethernet, GPON to simplify operations and lower
• Enable alternative providers to connections, and flexibility in PWE TCO
add leased lines to their service termination options: Customer
portfolio to attract new customers site-to-customer site, customer
site-to-POP/network, POP-to-POP
4G Sites
RADview
eNB
ETH
Hub Site
GNSS Antenna
4G BBU
CPRI/Fiber
5G Mobile
PE Core
RRH 5G Site
Transport
gNB Network
n x 10-GbE/
ETH ETX-2i 25-GbE/100-GbE
Split 1
4G eNB
n x 10-GbE/25-GbE/100-GbE
5G ETX-2i
ETH
Split 2
5G
eCPRI
Split 7.2
Fronthaul/Midhaul/Backhaul
Your Benefits:
• Fast rollouts of 5G deployments • Fixed-mobile convergence: • L2, L3-based fronthaul/midhaul/
with in-field future upgrades to Colocated mobile and fixed backhaul performance monitoring
meet new requirements broadband sites for multiple network slices and for
• CSG for multiple 5G RAN/O-RAN • Multi-CoS Carrier Ethernet/IP network sharing
splits and colocated 4G/5G sites backhaul with service management • Small form factor to meet space
• Highly efficient 4G/5G aggregation: and OAM-based diagnostics and power supply restrictions
10G, 25G and 100G • 1588 PTP (GM, BC Class B, TC) with • Ruggedized enclosure for outdoor
• Support wholesale and direct MNO integrated GNSS receiver, eSync-E installations
applications for timing synchronization
Mobile Services
Timing (1588 PTP) RADview
Small Cells
GNSS
ETX Antenna
4G/5G
PE Router Core
PSN
MW
PTP-GM
eNB/gNB 1588 BC/TC MiCLK
MW 1588 GNSS
BC/TC Antenna
Your Benefits:
• Addressing stringent timing • Built-in GNSS receiver eliminates • Robust GNSS (GPS/GLONASS)
requirements (frequency/phase) for the need for a GNSS antenna on backup – time holdover for
LTE/LTE-A/5G macro and small cells every cell site; avoids spoofing and 72 hours, using Sync-E or 1588
with a fully featured PTP jamming frequency references from the
Grandmaster: • Full network coverage, even in network (Assisted Partial Timing
– ETX-2 in a local POP/hub underground and indoor installations Support)
– MiCLK unique SFP plugged into an
• Fits existing installed base – no
aggregation switch
need for CapEx investments in
• Cost efficiency by bringing PTP retrofitting network with 1588 BC/TC
Grandmaster closer to the cell site support across the entire path
RAD solutions ensure seamless migration to packet switched communication networks and
applications. We address all communication needs of utility, transportation, government, and oil
and gas sectors with always-on reliability and mission-critical protection. We offer best-of-breed
reliability tools. Our solutions are used for cybersecure asset-monitoring, operational WAN, edge
computing, and Smart/Safe City deployments.
• Secure networking for digital transformation to • Seamless communications over fiber optics, radio
allow for fast, secure and economical deployment links, 2G/3G/4G/5G cellular links, and leased lines
of thousands of new remote asset monitoring
• Extensive security suite includes SCADA-aware
sites
firewall, intrusion prevention, man-in-the-middle
• Multiservice, packet and PoE-intensive OT WANs attack prevention, encryption, device connection
control, event logger, and anomaly detection
Utilities
SecFlow Airmux Airmux
AMI/AMR PLC/ P2P/P2MP-SU P2P/P2MP-BS
Concentrator Logger Private
Radio
Private Cloud or Customer’s HQ
RADview+SIEM SCADA
Master
RTU/PLC/
Reclosers
SecFlow Security
Servers
SecurityGateway
ETH/ OT
Serial PSN Network
Network
Server
LTE
SecFlow
LTE
DI/O/AI
Your Benefits:
• A comprehensive and secure solution new applications on top of SecFlow • Secure remote access for end-user
addressing communications to devices device management
secondary substations, metering and • Zero-touch provisioning, enhanced • Transparent delivery of SCADA,
distribution automation cyber security (IPsec, PKI, FW, IDS/ protocol conversion and terminal
• Integrated IEC 61131-3 RTU/PLC IPS, SIEM) server
• Integrated LoRaWAN gateway • Seamless communications over fiber • Complies with IEC 61850-3 and
• Virtual environment for user-tailored optics, radio links, 2G/3G/4G/5G IEEE 1613 environmental standards
applications allows customers to add cellular links, and leased lines from a • Point-to-multipoint radio
telecom service provider connectivity supports high capacity
mission-critical traffic over licensed
and unlicensed sub-6 GHz bands
Substation
RADview
Connection on Demand
RTU
Megaplex/ Megaplex/ SCADA Center
Ceragon/ PacketLight PacketLight Megaplex
Megaplex
Airmux
Voice FO
Microwave Data Center
CypherPlug 4-42 GHz CypherPlug
ETH
Core Network
IEDs
Substation Substation
Teleprotection
Megaplex/
RTU PacketLight
Megaplex Megaplex Teleprotection
Access
Network
Voice
RTU
ETH ETH
IEDs IEDs
Your Benefits:
• Powerful cross-generation TDM, MPLS • Complete cyber suite, including Ethernet IEDs, with versatile rates
and Ethernet capabilities, including encryption, authentication and from DS0 (time slot) up to
TDM DS0 cross connect and authorization STM-64/OC-192 or 10-GbE
SDH/SONET, Carrier Ethernet • Easy connectivity of all services • Guaranteed smooth migration to PSNs
with OAM and assured QoS, TDM including Teleprotection over either based on hybrid design for reduced
pseudowire, Ethernet over SDH/SONET or a packet network latency and better resiliency
NGPDH/SDH/SONET
• Supports analog and digital data • Point-to-point and point-to-multipoint
and voice devices, as well as radio connectivity supports high
capacity mission-critical traffic over
licensed and unlicensed bands
• CypherPlug encrypts traffic over any
L2/L3 network
CypherPlug
Ceragon/Airmux Miniature IP-Level
Wireless Transport Platform Network Security Device
Highway Communications
Transpor tation
2 Packet-Based Operational Network Using Carrier-Grade Ethernet
PowerFlow-2
PowerFlow-2 Airmux
PowerFlow-2-10G/ PowerFlow-2
PowerFlow-2
Display
Display Board
Board
Traffic Control Center
PowerFlow-2-10G/ PowerFlow-2-10G/
PowerFlow-2-10G/ PowerFlow-2 PowerFlow-2 Airmux Airmux
PowerFlow-2 PowerFlow-2
Display
Board
ETS-1-10G
Aggregation
Switch
SecFlow PowerFlow-2
SecurityGateway
Control
Rooms Display
Board
Public Cellular
Network
Your Benefits:
• Backhaul high-definition video • Enable outdoor installations with • 10-GbE carrier-grade Ethernet
feeds, roadside display board industrial design and ruggedized core rings with traffic management
and billing station data from enclosures capabilities ensure reliable
remote facilities over fiber, high • Extensive PoE support including connectivity with appropriate
throughput microwave PtP and PoE++ and Airmux PoE quality of service for various
PtMP radio links, and 10-GbE rings applications
• 5G support where fiber isn’t
available
Operational WAN
Control Center
CypherPlug RADview
Station
Megaplex
Megaplex
CypherPlug
Megaplex-4 Station
Megaplex-4 Megaplex-4
STM-16/STM-64/
10-GbE
PacketLight PacketLight
Megaplex with
MS/CESP
Megaplex-4
Station
PowerFlow-2
Airmux/
Megaplex Ceragon
PSN
PowerFlow-2 PowerFlow-2
Airmux/Ceragon
Your Benefits:
• Ensure protected connectivity train supervision (ATS), centralized IEDs, with versatile rates from
between stations and control room traffic control (CTC), SCADA, and RS-232 up to STM-64/OC-192 or
using multidrop and ring topologies multiparty hotlines, as well as 10-GbE
• Ethernet extension over fiber or passenger information systems (PISs) • Point-to-point and point-to-
copper (SHDSL) to enable service • Support legacy TDM and Ethernet multipoint radio connectivity
reach to remote M2M and video traffic delivery over SDH/SONET/IP/ supports high capacity mission-
devices MPLS/MPLS-TP/CE/DWDM/OTN and/or critical traffic over licensed and
• Support mission-critical railway carrier-grade fiber optic rings unlicensed bands
applications, including automatic • Support analog and digital data and • CypherPlug encrypts traffic over
voice devices, as well as Ethernet any L2/L3 network
PacketLight-1000/2000
Ceragon/Airmux Complete Solutions for WDM/OTN
Wireless Transport Platform and Dark Fiber Applications
Transpor tation
Multiservice Operational WAN
SDH/
SONET
Radar Monitor
X.21
4W
Extended Range
VHF & PTT
Approach and Control Tower
Megaplex E&M
AFTN Data
9.6 kbps IP/MPLS/
MPLS-TP/CE
Radar
Megaplex RS-232
X.21
Telex (TTY)
FXS/
FXO
4W Airmux/
Direct
Ceragon
Airmux/ Speech
Ceragon
Megaplex-1
Your Benefits:
• Ensure reliable, uninterrupted • Deliver direct speech (DS), Telex • Distributed SCADA security suite
communications between different (TTY), radar data (RD), extended with integrated firewall and
traffic control centers with RAD’s range VHF (ER), and VHF data link encryption
multiservice connectivity solutions (VDL) traffic, together with other • Optimized for subrate leased line
over any transport network, voice, fax and LAN services, using transmission and backup to reduce
including SDH/SONET, IP/MPLS, industry-standard interfaces OpEx
MPLS-TP, CE, OTN, DWDM • Transport traffic over copper, fiber, • Ruggedized platforms withstand
microwave, or satellite links the rigors of field operations
• Support fail-safe operations with
ISDN, VSAT and Ethernet backup
Asset Monitoring
1
Control Center
WiFi PowerFlow-2
ETX
PowerFlow-2
PacketLight PacketLight
G.8032
Display ERPS
Board
DWDM/OTN
RADview
PacketLight
Video
Camera
PowerFlow-2 Control
SecurityGateway Rooms
PowerFlow-2 Airmux
WiFi WiFi
SecFlow SecFlow
Video Video
Camera Camera
Airmux Airmux
P2P
Your Benefits:
• A comprehensive communications • Seamless communications over fiber • Transparent delivery of legacy traffic
solution for CCTV cameras, WiFi optics, radio links, 2G/3G/4G/5G from serial-based devices
access points, sensors, payment cellular links, and leased lines • Local video recording
kiosks, etc. • Zero-touch provisioning with • Point-to-multipoint radio connectivity
• Integrated LoRaWAN gateway enhanced cyber security (integrated supports high capacity mission-critical
• Ruggedized devices for outdoor IPsec, encryption, stateful firewall, traffic over licensed and unlicensed
installations SIEM) sub-6 GHz bands
• Virtual environment for user-tailored • Secure remote access for end-user
applications allows customers to add device management
new applications on top of SecFlow
devices
Government
Operational WAN
Control Center
ETX
Megaplex/ Megaplex/
PacketLight PacketLight
RADview
WiFi PowerFlow-2
PowerFlow-2
G.8032 WiFi
Display ERPS Airmux/
PowerFlow-2
Board Ceragon
Video
Camera
Video
Camera
PowerFlow-2
Airmux/
Ceragon
Your Benefits:
• Provides a comprehensive solution • Central management to provision • Secure connectivity over
for all Smart City communications and control the communications public/private networks
• Connect security cameras, WiFi network • Turnkey deployment solutions
access points, display boards, • Long-distance fiber optic private by RAD for Safe City, including
meter concentrators, and other network backbone with communications, video
sensors in urban and rural areas OTN/DWDM multi-tunneling at surveillance and analytics systems,
over fiber optics and wireless rates of up to 100G cameras, and sensors
radios • G.8032 Ethernet Ring Protection
Switching (ERPS) and PoE support
Megaplex PowerFlow
Next-Generation Multiservice Managed Ruggedized Ethernet
Networking Node Switch with Power over Ethernet
Communications
RADview
ETH PowerFlow-2
ETX-2
Copper
FO ETH
E1
ETX-2v CypherPlug
Megaplex-4
CypherPlug
IP/MPLS/
MPLS-TP/CE
CypherPlug PowerFlow-2
ETH
ETX-1p FO ETH
MiTOP Copper
CypherPlug
E1
ETH
Airmux-5000
Airmux-5000
ETH
ETH
Airmux-5000
Your Benefits:
• Connect a privately owned low speed data, using the same • Secure remote access for
government/military/public device end-user device management
network to remote sites using • Utilize existing SDH/SONET • CypherPlug encrypts traffic over
diverse infrastructure network or build a state-of- any L2/L3 network
• Support multiple services, the-art IP/MPLS, MPLS-TP, CE
including Ethernet, TDM and backbone
A
Airmux-400 RAD’s Airmux-400 series of point-to-point broadband wireless radios delivers native
Ethernet and TDM services over a single wireless link in various sub-6 GHz frequencies.
Point-to-Point Broadband
The high capacity Airmux-400 radio systems provide aggregated throughput of up to
Wireless Access
750 Mbps and a range of up to 120 km (75 miles).
The Airmux-400 incorporates advanced features, such as MIMO and OFDM for optimal
performance and unmatched robustness in all environments, making it ideal for:
A • Utilities AMI/DA backhaul
• Public safety and government backhaul
B • Transportation (highways and railways backhaul)
C
• Multi-band operations over • Extended range – up to 120 km
D 3.5 GHz and 4.9 to 6 GHz in a (75 miles)
single device • Hub-site synchronization
E
• 5 MHz, 10 MHz, 20 MHz, 40 MHz, (HSS) supports simultaneous
or 80 MHz channel bandwidth transmission from up to 16
F
• TDM over packet integration for colocated Airmux-400 and/or
TDM service support with other Airmux-5000 units
G
RAD TDMoIP products • Ring protection link (RPL) for
Ethernet resiliency
H • Net throughput (aggregated):
- Airmux-400H: up to 750 Mbps • Spectral power measurement and
I - Airmux-400A: up to 500 Mbps RF survey tool – “Spectrum View” –
• OFDM, MIMO and antenna for quick and easy installation
diversity capabilities
J
M
Airmux-5000i/ RAD’s Airmux-5000 point-to-multipoint broadband wireless radios are the ideal wireless
solution for business users demanding high capacity throughput with dedicated traffic
N Airmux-5000D bandwidth allocation and service level agreement (SLA) per subscriber. Featuring up to
Point-to-Multipoint Broadband 750 Mbps aggregated sector capacity and a range of up to 40 km (25 miles), a single
O Wireless Access Airmux-5000i base station supports up to 64 remote subscriber units (SUs) with multi-
band operation, making it ideal for:
P • Service providers and ISPs, offering IP backhaul and 4G/broadband access for
remote, rural and underserved communities
Q
• Private networks requiring high capacity inter-branch connectivity for university
campuses, healthcare organizations, government institutions, large enterprises, and
R public establishments
• Security and surveillance applications requiring aggregation and backhaul of traffic
S from multiple colocated HD cameras
C
• 50% fiber savings with quick ROI • 1300-nm (1291-1312) wavelength
at any supported bandwidth rate D
• Works at any bit rate: 40G, 100G,
200G • Operates over various optical
E
• Unique patented technology distances: 10 km (6.2 Miles),
complements QSFP28, QSFP-DD, 20 km (12.4 Miles), and 40 km
(25 Miles)
F
QSFP+, CFP-2
• Double fiber capacity while
• Compact and simple to deploy G
(no need for configuration or avoiding costly new
fiber/transceiver deployments
additional power source) H
• Low insertion loss (<2 db
including connectors) I
M
Ceragon FibeAir IP-20 Ceragon’s wireless transport platform accommodates various needs in different
scenarios while maintaining availability and security at the highest standards.
Wireless Transport Platform N
The FibeAir IP-20 platform meets any critical infrastructure wireless transport need, of
any scale, in any topology and at any frequency, combined with an advanced security O
feature set and low-latency performance.
The FibeAir IP-20 comes in all-outdoor, split-mount and all-indoor configurations P
supporting 6.86 GHz frequency range.
Q
FibeAir IP-20C: FibeAir IP-20E: R
• Double wireless backhaul • Provides ultra-high radio capacity
capacity via remote activation of and spectral efficiency of up to S
another radio carrier with no site 2.5 Gbps over a 500-MHz channel
visits required • Minimizes your sites’ physical T
• Provides the highest radio footprint with an integrated flat
capacity and spectral efficiency in panel antenna U
any condition and any frequency
FibeAir IP-20S:
channel size (up to 80/112 MHz) V
• Compact, all-outdoor wireless
• Field-proven 4x4 LoS MIMO
backhaul node that is optimized
technology – enabling 1-Gbps W
for simple installation and
radio capacity over a single
operation
30-MHz channel or 2 Gbps over a X
single 60 MHz • Operates within the entire
microwave spectrum (6 – 42 GHz)
Y
C
Ceragon IP-50 Ceragon’s IP-50 series resolves modern wireless transport challenges via disaggregation
that is implemented in three independent innovation paths: Radio, networking hardware
Disaggregated Wireless
and networking software.
Transport Platform
M
CESP VM This data/voice virtual machine processing engine can be installed on any X.86 or ARM
platform. Working on any white box, the CESP VM provides seamless on-site or remote
N Virtual TDM Engine
configuration in real time, replaces legacy and/or non-functioning voice compression
products, and supports parallel processing on multicore processors.
O
It is recommended for integration with ETX-2v, ETX-1p, SecFlow-1p and Megaplex-4,
P and its PWE engine is compatible with MiTOP, Megaplex-4 and ETX-205A.
The SFP sleeve is easily pluggable into standard MSA-compatible SFP ports of switches, C
routers, DSLAMs and mobile base stations, eliminating the use of external power and
reducing space and cabling expenses.
D
The CypherPlug functionality is based on a powerful FPGA that enables easy
customization to additional or different customer requirements. E
F
NE W • End-to-end static transport mode • Wire-speed encryption
IPsec encryption (1000 Mbps)
G
• Designed for seamless protection • Low OpEx due to decreased
enhancement of any existing SFP- power consumption, space and H
based network device installation costs compared to
other solutions I
L
Hot Product
M
ETX-2i
The ETX-2i line of next-generation NID/NTUs offers advanced demarcation for N
Carrier Ethernet
Demarcation up to 100G SLA-based, L2 and L3 business services, wholesale services and mobile
backhaul. The ETX-2i offers a complete service life-cycle toolset, as per MEF O
3.0 specifications.
P
The ETX-2i offers a variety of Ethernet network products supporting 1-GbE,
10-GbE and 100-GbE connections. Q
Z
>>>
E >>>
• ETX-2i: Ethernet Demarcation Available as a modular demarcation device, the ETX-2i enables operators to deliver the
Device and Cell-Site Gateway most advanced Carrier Ethernet services over any network connection. In addition, the
ETX-2i combines advanced timing functionalities for wholesale mobile xHaul.
I • ETX-2i-B: Ethernet Demarcation ETX-2i-B is a demarcation device optimized for remote branches and SMBs over native
Device for SMBs Ethernet access. It is ideal for carriers, service providers, and wholesale operators
J requiring advanced Ethernet L2/L3 functionality at customer premises and multi-tenant
units (MTUs).
K
• 1U device with up to ten GbE • Supports O-RAN deployments
L ports • Pluggable x86 D-NFV server
• Fan-less 2U device with ten GbE module for hosting virtual
M ports, ideal for cost-effective functions (1U device)
small-cell aggregation
N • Integrated 6-Gbps switch/router
Q
Hot Product
R
• ETX-2i-10G: 10G Carrier The ETX-2i-10G combines intelligent, high bandwidth demarcation and aggregation
Ethernet Demarcation/ capabilities for enterprise headquarters and mobile backhaul operators. As an
S aggregation solution at the concentration point, a single unit can support numerous
Aggregation Device
services and concurrent OAM sessions.
T
• 19” unit with up to four 10-GbE and TC for frequency and phase
U and up to 24 GbE ports in various synchronization in mobile networks
combinations • ITU-T G.8032 Ethernet Ring
V • Half and full 19” unit with up to Protection Switching
eight 10-GbE ports or four 10-GbE • NEBS-compliant and
W and up to eight GbE ports in environmentally hardened
various combinations enclosure options
X • Flexible synchronization offering • Supports O-RAN deployments
Sync-E, IEEE 1588v2 slave, BC
Y
Z
>>>
Hot Product
• ETX-2i-100G: 100-GbE ETX-2i-100G delivers the full suite of Carrier Ethernet demarcation and aggregation
Carrier Ethernet capabilities, at 100-GbE rates. MEF 3.0-certified, the ETX-2i-100G addresses the
Demarcation Device increasing demand for high bandwidth access to data centers, while maintaining SLA
guarantees, service monitoring, flexibility, and management.
M
ETX-2 The ETX-2 line of Carrier Ethernet NID/NTUs offers demarcation for SLA-based
Carrier Ethernet Demarcation business services, wholesale services and mobile backhaul. The ETX-2 is MEF N
Carrier Ethernet 2.0-certified for E-Line, E-LAN, E-Tree, and E-Access services,
as well as delivering TDM pseudowire over packet networks. Supporting high
O
capacity service provisioning per EVC/EVC.CoS, flexible classification and H-QoS
traffic management, it also performs accurate and scalable service testing and
P
performance monitoring. The ETX-2 is supported by RADview management and
Q
enables a variety of protection mechanisms. It also offers NEBS-compliant and
environmentally hardened enclosure options.
R
Z
>>>
E >>>
• ETX-203AX: Carrier Ethernet ETX-203AX is ideal for carriers, service providers, and wholesale operators requiring
Demarcation Device advanced Ethernet functionality at customer premises and multi-tenant units (MTUs).
• Four and six FE/GbE ports; flexible • Optional SHDSL network port
selection of SFP and copper for cost-effective Ethernet over
interfaces SHDSL service
A • Optional E1/T1 PDH user port to • Wide-range AC/DC power supply
be encapsulated and transported
B over Ethernet
G
• ETX-203AX-T: Carrier Ethernet ETX-203AX-T extends Ethernet VPN services to new, out-of-reach locations, allowing rapid
H
Device with LTE/Broadband site commissioning by using readily available LTE or broadband networks. The ETX-203AX-T
Connectivity enables cost-effective Ethernet VPN services backup using LTE or broadband. Additional
I cost optimization can be achieved by splitting traffic between a service-assured VPN and
best-effort LTE or broadband access.
J
• Five FE/GbE ports with flexible • Full suite of MEF CE-2.0 capabilities
selection of SFP and copper for SLA monitoring, diagnostics and
K
interfaces fault detection
O
• ETX-203AM: Universal Carrier Available as a modular demarcation device, the ETX-203AM enables operators to deliver
P Ethernet Demarcation Device Carrier Ethernet services and L2 VPNs over any network connection.
T
• ETX-205A The ETX-205A provides advanced Carrier Ethernet demarcation and offers combo
Carrier Ethernet/Mobile interfaces and power supply redundancy. For LTE/LTE-A mobile backhaul, the ETX-205A
U
Demarcation Device is installed at cellular tower and controller sites to guarantee differentiated SLAs.
V
• L2 VPN service demarcation with • Distributed Grandmaster
W superior traffic management and architecture integrating built-in
monitoring capabilities GPS receiver with IEEE 1588v2
X • Flexible synchronization offering Grandmaster functionality for
Sync-E, IEEE 1588v2 slave, BC cost-optimized LTE deployments
Y and TC for frequency and phase • E1/T1 pseudowire services per
synchronization in mobile MEF-8, UDP/IP, MPLS static
Z networks labeling in SAToP and CESoP
modes, and with CAS
Hot Product
ETX-1p ETX-1p is an economical thin CPE enabling business customers’ transition to the cloud.
As a disaggregated CPE, it hosts virtualized function containers. By combining powerful
CPE for Branch Routing
networking capabilities with flexible connectivity options, rich management interfaces
and Edge Access to Cloud
and embedded security functions, the ETX-1p enables service providers to deliver
advanced IP-VPN services, as well as value-added virtual services from the data center to
the customer branch. The all-in-one device includes an embedded router and a next-
generation firewall, together with switching capabilities and LTE and WiFi support, making A
it easy to connect branches to private and public clouds over mobile or fixed broadband
or over MPLS, without the need for extra hardware or complicated configurations.
B
ETX-1p is bundled with pCPE-OS, RAD’s carrier-grade, Linux-based operating system.
Designed to run on various ARM- and x86-based CPE platforms, vCPE-OS is security
C
hardened and optimized to provide maximum performance at a low footprint.
D
• vCPE-OS operating system • Dynamic routing with OSPF, BGP,
• Hosting of third-party software VRF and secure VPN using IPsec, E
using Linux LXD container DMVPN and NAT for flexible
technology connectivity F
• Multiservice support: GbE copper • Cyber security suite: 802.1X, IPsec
and fiber encryption with automated PKI, G
stateful firewall
• Single or dual cellular modem
for a 2G/3G/HSPA+/HSDPA/LTE • Zero-touch provisioning, H
uplink; dual SIM for always-on firewall configuration, fault
connectivity management and reporting, bulk I
software upgrade, and database
• WiFi access point
management using RADview J
M
ETX-2v The ETX-2v includes a line of carrier-grade white boxes installed at the
Open vCPE White Box customer premises – either at headquarters or in remote branch sites. The N
Platform ETX-2v products support a wide range of business customers and user
scenarios, from small offices to large sites, using a variety of bandwidth, O
processing power and LAN/WAN options.
P
• White box appliances for virtual • Various memory (RAM, SSD) size Q
CPE, SD-WAN and NFV featuring options
powerful x86 processors • Intel QuickAssist technology – R
• Hardware-based security featuring authentication, encryption, etc.
a Trusted Platform Module (TPM) • SR-IOV capable ports to enhance
S
• Flexible SFP/UTP connectivity with throughput
optional interfaces including: LTE, T
• Fan-less, low power (~7W) options
WiFi, VDSL, GPON, ETHoPDH, PWE, reduce carbon footprint
and more U
• Rack-mount and desktop options
• Supports a range of x86
CPU technologies (Rangeley, V
Denverton and Xeon D), with
flexible multi-core options W
E/M
ETS-1 The ETS-1 line of next-generation Ethernet access switches provides 1G/10G end-user
connectivity to large-scale corporate networks, small and medium businesses and
Ethernet Access Switches
service providers. Offering a rich set of L2 and L3 features and a highly effective cost-
performance ratio, they are ideal for upgrading old infrastructure and for Smart City
communications.
M
Megaplex-1 RAD’s Megaplex-1 is a compact, highly reliable multiservice access node that transports
analog and TDM traffic originating from legacy circuit-switched devices over packet
N Multiservice Pseudowire
switched networks (PSNs). It is specifically designed to address the needs of critical
Access Gateway
infrastructure network operators who are migrating to next-generation Ethernet, IP or
O MPLS communications. This includes utilities, transportation operators and government
agencies. It enables seamless service migration with a scalable TDM over packet
P pseudowire engine and comprehensive multiservice support for PDH, high and low speed
data, analog voice, and Teleprotection devices.
Q
MiCLK RAD’s MiCLK® is the world’s first Grandmaster on an SFP, allowing easy upgrades for P
existing base stations and backhaul equipment to support IEEE 1588 for LTE/LTE-A and
1588 Grandmaster on an
5G. Easily plugged into service routers to simultaneously distribute frequency and time,
SFP with Built-In GNSS Q
the patented MiCLK eliminates the need to install GPS/GNSS antennas at every cell site
while providing highly accurate timing distribution with full network coverage – even in
underground and in-building installations. It is also ideal for 4G small-cell deployments. R
The field-proven MiCLK allows service providers to avoid spoofing and jamming risks, and
dramatically reduces installation and engineering costs by eliminating the need for
S
additional space or power requirements.
T
M
MiNID
MiNID® is a field-programmable miniature L2/L3 network interface device (NID),
Miniature Programmable
available in a variety of form factors. It features remote monitoring and fault
Network Interface Device
isolation, as well as remote packet capture and micro-burst measurement
capabilities.
MiNID also provides instant upgrades for legacy switches and routers to help
A
service providers, mobile operators and wholesale carriers introduce new
services quickly and with better quality of experience (QoE) while increasing
B
operational efficiency and lowering costs. Remotely managed via CLI, web
interface and SNMP, it features zero-touch provisioning for fast and simple
C
installation and does not require dedicated training.
G • MiNID SFP The MiNID SFP is easily pluggable into SFP ports of switches and routers and
eliminates the need for standalone demarcation devices. It delivers substantial
H OpEx savings by eliminating additional power, space and cabling expenses.
M
• MiNID Sleeve The MiNID Sleeve is easily pluggable into SFP ports of switches and routers and
N seamlessly hosts standard FE and GbE SFP modules.
T • MiNID Standalone The MiNID is also available in a miniature standalone enclosure, with a variety of
user and network port options for maximum interface flexibility. Optional bypass-
relay functionality ensures fail-safe operation and Power over Ethernet (PoE)
U
support eliminates the need for an additional power supply.
V
• Two ports with flexible user or • Bypass PoE enables powering
W network functionalities both the MiNID and the end
• Combo ports automatically select device
X between fiber and copper/RJ-45
• Internal bypass relay for copper
Y interfaces offers service
continuity in the event of power
Z failure
D
• Supports framed and unframed • Supports full duplex flow control
E1/T1, E3/T3 • Fault propagation from WAN to E
• Supports standard GFP, HDLC- LAN link
like, and cHDLC encapsulation • Software download via TFTP F
• Hot-insertion SFP-format plug, • Supports Ethernet OAM per
MSA-compliant 802.3-2005 (formerly 802.3ah) G
• User-configurable • MiRICi-E1/T1 SyncE support with
• Enhanced management of a unique ordering option
H
control, status and monitoring
I
• Out-of-band management
through I²C
J
M
MiTOP-E1/T1, RAD’s MiTOP-E1/T1 and MiTOP-E3/T3 transport framed or unframed E1/T1 or E3/T3
traffic, respectively, over Ethernet, IP and MPLS networks. Featuring multi-standard
MiTOP-E3/T3 N
pseudowire support and Synchronous Ethernet (Sync-E) in a finger-sized enclosure, the
Smart SFP-Format TDM smart SFP devices provide an ideal solution for service providers, utility companies and
Pseudowire Gateways enterprises wishing to ensure highly accurate timing synchronization for their legacy
O
services while migrating to packet switched transport.
Part of RAD’s “System on an SFP” portfolio, the MiTOP-E1/T1 and MiTOP-E3/T3 are
P
designed for quick and simple insertion into any Fast Ethernet or Gigabit Ethernet port
with an MSA-compatible socket. Q
O/P
Optical Bypass Switch The Optical Bypass Switch is capable of automatically bypassing faulty network nodes in
the event of a power outage. It is used in optical fiber communications and fits ring or
Fiber Protection Switching
linear fiber network architectures. Featuring AC or DC power supply, the Optical Bypass
System
Switch automatically identifies the power supply status at the network node and helps
avoid network outages caused by node failures.
A
• Small in size • Non-latching type – automatic
B recovery
• Easy installation and operation
• LED indicators for power and
C • Low insertion loss – minimum
impact on existing optical budget optical switch status
M
PacketLight PacketLight’s product suite offers the flexibility to build a cost-effective, highly efficient
optical network infrastructure for CWDM/DWDM, OTN and dark fiber connectivity, while
N Complete Solutions for
addressing challenges faced by service providers and organizations.
WDM/OTN and Dark Fiber
O Applications Layer 1 Encryption PacketLight solutions are ideal for a variety of vertical markets, such as carriers, ISPs,
dark fiber providers, data centers, storage facilities, utility companies (railway and power
P companies), and financial institutions.
The wide range of PacketLight xWDM and dark fiber solutions includes multi-rate
Q sub-10G CWDM/DWDM platforms, 10G CWDM/DWDM and 100G solutions with built-in
OTN options, amplification and booster solutions, WSS-based ROADMs,
R ten 1-GbE muxponders, and passive multiplexing solutions.
Hot Product
PowerFlow RAD’s PowerFlow consists of managed and unmanaged industrial-grade Gigabit
Managed Ruggedized
Ethernet switches, designed to build packet-based, PoE-intensive operational
Ethernet Switches with
networks for critical infrastructure.
Power over Ethernet
PowerFlow is ideal for OT WANs of power utilities, railways, traffic controllers,
and Safe City applications requiring advanced Ethernet functionality and Power
A
over Ethernet (PoE) support.
• PowerFlow-2: RAD’s PowerFlow-2 is a series of industrial-grade, managed Fast Ethernet and Gigabit
D
Managed Ruggedized Ethernet Ethernet switches, with or without PoE support, which provide stable and reliable
Switches with Multiple Options Ethernet transmission. Housed in ruggedized DIN rail or wall-mountable enclosures, E
these switches are specifically designed for harsh environments, such as industrial
networking and intelligent transportation systems (ITS), as well as military and utility F
market applications where environmental conditions exceed commercial product
specifications. G
• Compact Ethernet switches with • Flexible deployment scenarios
up to 16 x 10/100/1000BaseT using xSTP, ERPS (ITU-T G.8032) H
ports, and eight x 100/1000BaseFX and ultra-fast recovery with
SFP ports PF-Ring/chain I
• Variety of input voltage from • Certified for EN 50121-4,
12—48V DC to HVDC of 110/220V IEC 61850-3, IEEE 1613 and
J
DC and support of 110/220V AC NEMA TS2
K
• Variety of PoE feeding options • Wide range of operating
including PoE (802.3af), PoE+ temperatures from -40°C to 75°C
(802.3at) and PoE++ (60W) (-40°F to 167°F)
L
O
• PowerFlow-2-10G: RAD’s PowerFlow-2-10G managed industrial-grade core switches provide a wide
Industrial 10G Core Switch variety of reliable mechanisms for mission-critical network communications. These
P
Demarcation/Aggregation Device mechanisms include redundant and isolated power supplies, STP/RSTP/MSTP and
ITU-T G.8032 Ethernet Ring Protection Switching. The PowerFlow-2-10G is a fan-
less unit with IP30 ruggedized metal housing to meet the demands of industrial-
Q
grade and core layer applications.
R
Hot Product
RADinsight SD CSP service desk representatives and enterprise IT are empowered with intuitive,
insightful on-the-spot diagnostic tools to troubleshoot L2 connectivity issues.
Smart Diagnostics for
CSP Customer Care RADinsight SD improves first call resolution, helping service desk representatives to easily
isolate the issue and provide the customer with insightful diagnostics. It goes beyond
traditional performance monitoring and other sophisticated engineering tools used by
highly skilled professionals for CSP network monitoring with intuitive end-to-end visibility
A across the customer LAN, CSP network (WAN) and internet/cloud.
B
• Cloud-based on-demand • AI/ML-driven analytics provide
subscription service insightful feedback for next best
C
• Dashboards display an at-a-glance, action
L
Hot Product
M
RADinsight TI RADinsight TI detects and mitigates DDoS attacks threatening CSP network and
enterprise/business normal operations, utilizing an EAD/NID’s unique capabilities to see
N Threat Intelligence
all ingress and egress traffic at the CSP and customer edge, and block malicious flows.
for CSP Network and
O Customer Security
Hot Product
RADinsight PT RADinsight PT harnesses a CSP’s EAD/NID capabilities to assess end-user usage, enabling
CSP sales to create upsell offers to customers who need bandwidth upgrades or premium
Personalized Targeting
cloud connect services.
for CSP Marketing
B
• Identifies customers with high • Identifies customers with multiple
volume of packets dropped by latency issues when accessing
policer public cloud services
C
F
NE W G
M
RADview RADview is a modular network management and edge domain orchestration suite for RAD’s
Network Management solutions. It enables configuration, provisioning, monitoring, and management of networks N
and Orchestration and services, and includes the following management tools:
• Network element manager O
• Performance monitoring portal for ongoing monitoring of Ethernet and IP services
• D-NFV domain orchestrator for virtual machines and application services at the customer P
edge
• End-to-end service manager for planning and activation of Carrier Ethernet services Q
• Service center for managing TDM services
R >>>
D
RADview Domain Orchestrator
E
RADview Performance Monitoring
F
K
RADview Service Manager
L
N • RADview Performance Monitoring The RADview Performance Monitoring module enables ongoing monitoring of Ethernet
and IP service performance by collecting KPI (key performance indicator) data from
O RAD devices. It allows service providers and network operators to easily monitor and
manage actual network and service performance over time and compare it to service
P requirements and SLA (service level agreement) guarantees.
The RADview Performance Monitoring module enables immediate detection of service
Q degradation, so that remedial actions are taken to quickly restore guaranteed
performance levels. The system retrieves data lost due to connection failures and
R exports standard CSV ASCII files to OSS or third-party management systems.
S
• Collects, stores, analyzes and • TWAMP-based L3 performance
T presents KPIs from RAD devices monitoring for IP services
• In-service bandwidth utilization • SLA threshold policy management
U
measurements • Performance dashboard with
V • Actual performance metrics based aggregated and drill-down views
on ITU-T Y.1731: • Monthly and real-time SLA
- Frame delay (latency)
W statistics reporting
- Frame delay variation (jitter)
- Packet delivery ratio
X
- Availability
Z >>>
D
• NFVI management (VIM) • Service maintenance (SFC backup,
• VNF and network service resource adjustment) E
onboarding • Ongoing fault management and
• Service function chain design and performance monitoring F
deployment using point-and-click UI
G
• RADview Service Manager The RADview Service Manager module is part of the RADview management suite and N
provides end-to-end management of MEF-based Carrier Ethernet services. An intuitive
GUI, point-and-click functionality and easy-to-follow wizards facilitate planning, O
provisioning, monitoring, diagnostics, and SLA assurance, so that network operators can
add new service offerings, as well as minimize overall operating costs, reduce provisioning P
times and maximize the efficiency of the entire network.
Q
• Offline resource optimization and • Graphic representation of
R
capacity planning simplifies pre- network clouds, links, nodes,
deployment stages end-to-end services, and network
S
• Point-and-click end-to-end service status indication
provisioning and OAM settings • Standard northbound interfaces T
• Automatic correlation of network to third-party OSS systems
faults with impacted services and • UI designed for management of U
customers very large networks
• Security management supporting V
user access profiles and allowing
network partitioning W
Z
>>>
R >>>
• RADview Service Center The RADview Service Center path management system enables end-to-end management
of RAD’s TDM access products, while easy-to-follow wizards facilitate provisioning and
monitoring over SDH/SONET and PDH networks. Supported capabilities include automatic
path routing, automatic re-routing of protected paths, physical and logical representation
of the network links, and more. The system allows network operators to add new service
offerings while minimizing overall operating costs, reducing provisioning times and
A maximizing the efficiency of the entire network.
B
• Point-and-click provisioning • Service availability report
C from a central workstation for • Dynamic filter displays service
networks of RAD products and network link-related alarms
D
• Automatic periodic self-healing of • Windows-based client and
faulty services Linux-based server
E
• Service security management,
F supporting user network access
profiles and allowing network
partitioning
G
M
RADWIN Fiber In RADWIN’s mobile wireless radios for transportation communications ensure continuous
high speed wireless connectivity between trains or metros and network control and data
N Motion centers. They deliver the highest throughput for on-board communications with
Mobile Wireless Access for guaranteed bandwidth to each railway vehicle, even on subways and monorail lines.
O Transportation Communications RADWIN’s radios offer bi-directional and asymmetrical train-to-track bandwidth with per-
train quality of service (QoS) guarantees. This allows always-on communications
P between trains and control and operations centers for critical services such as
information displays, panic buttons, PTT (push-to-talk), telemetry, ticketing machines,
Q and video streaming. They are fully compliant with railway environmental standards,
which are a prerequisite for all equipment installed on railways and metros. RADWIN’s
R field-proven mobile wireless access devices are deployed worldwide, powering
applications such as broadband WiFi for passengers, real-time high-definition CCTV, PIS,
CBTC and more. Operating in challenging outdoor conditions and in underground tunnels,
S
they deliver unmatched capacity and long-range coverage.
T
• Coverage range of 11 km • Up to 750 Mbps total available
(6.8 miles) throughput from the base station
U
• Integrated WiFi access point • Up to 250 Mbps total available
V (802.11b/g/n) for video throughput for vehicle/vessel
transmissions subscriber units
W • Built-in GPS for vehicle tracking • SNMPv3
• Direct DC power from the vehicle • AES 128
X (10–36V DC), power consumption • IP67 rating for severe outdoor
<25W conditions
Y
M
ROC-19, ROC-19L ROC-19 and ROC-19L are self-contained outdoor cabinets for housing a single 19”-wide
RAD unit and a cabling system for various telecom services. Constructed for outdoor use, N
Outdoor Cabinets
the enclosures are powered from a DC power source and are ideal for service providers
that require efficient environmental isolation for their equipment.
O
The ruggedized IP56 (ROC-19) and IP66 (ROC-19L) NEMA-4-rated construction includes a
rain hood, offering full shielding and protection against dust, rain and ice. Efficient
P
ventilation is assured by an intake fan with replaceable air filters (ROC-19) or passive
convection (ROC-19L). Secure, efficient maintenance and access are offered by a 2-point
(ROC-19L) or 3-point (ROC-19) door locking mechanism, as well as an integrated fiber Q
cable splicer/guide system, intrusion detection and over-current protection.
R
Hot Product
SecFlow-1p The compact SecFlow-1p is an entry-level multiservice gateway for cost-effective
Ruggedized IIoT industrial IoT backhaul. Housed in a ruggedized enclosure, it runs the advanced
vCPE-OS operating system. The SecFlow-1p allows secure connectivity over wireless or
Gateway
fiber networks for all types of industrial devices, including RTUs, smart meter aggregation
devices, IoT base stations or concentrators, CCTV cameras, point-of-sale devices, and
more. RADview’s security information and event management (SIEM) enables collection
A of all security events detected in the network. The system collects events from SecFlow
devices and displays them visually on customizable dashboards.
B
• vCPE-OS operating system • Cyber security suite: 802.1X,
C hosting of third-party software IPsec encryption with automated
using Docker container PKI, stateful firewall
D technology • Serial protocol handling with
• Multiservice support: GbE copper transparent tunneling/protocol
E and fiber, serial RS-232/485 conversion/terminal server for
• Single cellular modem for a IEC 60870-5-101, IEC 60870-5-
F 104, Modbus RTU to Modbus TCP,
2G/3G/4G/5G/450-MHz uplink;
dual SIM for always-on and DNP3.0 RTU to TCP
G
connectivity • Zero-touch provisioning,
• WiFi connectivity as access point firewall configuration, fault
H management and reporting, bulk
• Dynamic routing with OSPF, BGP,
software upgrade, and database
I VRF and secure VPN using IPsec,
management using RADview
DMVPN and NAT for flexible
J connectivity
L
Hot Product
M
SecFlow-1v The compact SecFlow-1v is a ruggedized multiservice gateway, featuring built-in security
mechanisms designed for applications controlling mission-critical operations. It is ideal
N Ruggedized Multiservice
for industrial IoT backhaul, enabling fast, secure and economical deployment of new IoT
IIoT Gateway with PLC sites. Allowing secure connectivity over wireless or fiber networks – either public (e.g.,
O and PoE, US-Certified cellular) or private – it connects all types of industrial devices, including RTUs, smart
meter aggregation devices, IoT base stations or concentrators, CCTV cameras, point-of-
P sale devices, WiFi base stations, and more. RADview’s security information and event
management (SIEM) enables collection of all security events detected in the network.
Q The system collects events from SecFlow devices and displays them visually on
customizable dashboards.
R SecFlow-1v provides reliable and secure Layer 3 communications for power utilities,
water and gas utilities, public safety and homeland security agencies, as well as
intelligent transportation operators.
S
• Hosting of third-party software • Serial protocol handling with
T using container technology transparent tunneling/protocol
• Multiservice support: GbE copper conversion/terminal server for
and fiber, serial RS-232/485, Power IEC 60870-5-101, IEC 60870-5-104,
U Modbus RTU to Modbus TCP, and
over Ethernet (PoE)
DNP3.0 RTU to TCP
V • Single or dual cellular modem for a
2G/3G/4G/CBRS/Anterix B8 uplink, • Zero-touch provisioning,
dual SIM firewall configuration, fault
W management and reporting, bulk
• WiFi connectivity as access point
software upgrade, and database
X • Dynamic routing with OSPF, BGP, management using RADview
VRF and secure VPN using IPsec,
• Digital and analog IOs with
DMVPN and OpenVPN for flexible
Y integrated RTU/PLC functionality
connectivity
• LoRaWAN gateway for remote
• Cyber security suite: 802.1X, IPsec
Z sensors aggregation
encryption with automated PKI,
stateful firewall • Complies with IEC 61850-3 and
IEEE 1613 and EN 50121-4
M
SFP/XFP/SFP+/QSFP28 RAD’s SFP/XFP/SFP+/QSFP28 small form-factor pluggable transceivers are hot-swappable,
input/output transceiver units converting optical and electrical media. Providing a wide
Transceivers N
range of detachable interfaces to multimode/single-mode optic fibers and UTP/coaxial
Small Form-Factor Pluggable electrical cables, RAD’s miniature transceiver units enable significant savings in system
Transceivers maintenance and upgrade costs, as well as facilitate efficient design of host devices and O
flexible network planning.
It is strongly recommended to order RAD devices with original RAD’s SFP/XFP/SFP+/
P
QSFP28 transceivers installed to ensure that the entire assembled unit has undergone
comprehensive functional quality tests. RAD cannot guarantee full compliance to product Q
specifications for units using non-RAD’s SFP/XFP/SFP+/QSFP28 pluggable transceivers.
R
Optical SFPs Smart SFPs
S
• MSA (multi-source agreement) • GPON OLT in an SFP
compliant • VDSL2 SFP T
• Built-in DDM (digital diagnostic
monitoring) function U
Hot Product
vCPE-OS The Linux-based, carrier-class vCPE-OS runs on any white box server and is pre-loaded in
RAD’s virtual CPE (vCPE) platforms. It combines powerful networking capabilities with
Open Carrier-Class
virtualization for hosting and accelerating SD-WAN and any other value-added virtual
Operating System network function (VNF) applications from any vendor.
for Network Edge
Virtualization
A • Slim, high performance operating • Any hardware:
system for optimized vCPE RAD’s white box/gray box
B platforms, third-party servers, and
• Open solution, compatible with
any VNF (networking, security RAD’s pluggable PNFs
C and IT), orchestrator and SDN • Comprehensive management and
controller security suite
D – NETCONF/YANG, CLI, Syslog,
• Any access with advanced
transport/networking capabilities: alarms, and more
E – SNMPv3, SSH, SFTP, Access
LTE, WiFi, Carrier Ethernet, xDSL,
PON, and TDM Control, TACAS+, RADIUS
F – Zero-touch and call-home
• High availability: Performance
provisioning
G monitoring, troubleshooting and
self healing – TWAMP, ICMP Echo,
UDP Echo
H
• Move to the head of the queue with priority • Meet your SLAs and avoid penalties by
handling by RAD support centers and round- minimizing service outages and enabling
the-clock access to RAD’s experts fast recovery
• Free access to RADcare Online, including • Plan ahead to limit your spending on support
regular software updates and patches, online/ and eliminate hardware repair costs related to
remote configuration assistance and RAD’s old equipment
FAQ knowledge base
• Shorten time to market (TTM): Rely on RADcare
to support your operations so you can turn up
new services faster
RADpro
Project Assured Services Project Assured Services
RADpro Project Assured services encompass all relevant aspects of the pre-installation design and rollout
stages to get the new network up and running as quickly and as seamlessly as possible while providing
additional vital benefits.
Enjoy full project assured service led by certified • Configuration and testing performed by RAD
RAD engineers who are committed to your project’s experts to ensure ideal turn-up time
success from start to finish. RAD offers different • Full documentation of your system’s installation
project assured packages which include: requirements for easier maintenance and future
• High-level design (HLD): Thorough review of changes
the physical topology, required hardware and • Commissioning design and execution so that the
software, and network management entire network can be certified before sign-off
• Low-level design (LLD): A definitive reference for
system and network implementation, including
detailed configuration instructions for devices,
network management system and interfaces
RADpro
Project Management
RADpro
Training Center
RAD’s training programs are designed to keep your • Course materials include a carefully balanced
team up-to-date with the latest RAD solutions. mix of lecture, demonstration and hands-on
• Technical seminars, web-based training and experience
project-based training: A variety of on-site and • Topics include theory, configuration and
remote interactive training options to ensure troubleshooting
your engineers master your RAD equipment
RAD and its channel partners embrace a set of fundamental guiding principles:
• Delivering the highest quality products, solutions • Resolving problems with candor and good judgment
and services that create loyal end-users
• Cooperating to win new business and improve
• Maximizing customer satisfaction existing opportunities
»Our Goals
This program is based on remote and face-to-face training for new Partners/new
personnel, followed by ongoing web-based training (WBT). Solution Partners must
attend the majority of the relevant WBT sessions.
This program begins with the technical seminars, where RAD’s trainers introduce the
latest features and functions. Some WBT sessions serve this purpose as well.
One of the main ingredients for a successful installation is the transfer of knowledge
to the user.
RAD offers direct training to end-users, arranged via RAD Partners, on-site or at RAD
headquarters. Our trainers’ expertise will ensure that the implementation of RAD’s
solutions will be as smooth as possible.
In addition to classroom training (either on-site or at a RAD office), we also offer
training via WBT.
RAD Headquarters
North American Headquarters
900 Corporate Drive, Mahwah, NJ 07430, USA
Tel 1-201-529-1100 | Toll free 1-800 -444-7234 | Fax 1-201-529-5777
Email [email protected]
International Headquarters
24 Raoul Wallenberg Street, Tel Aviv 6971923, Israel
Tel 972 -3-6458181
Email [email protected]
www.rad.com
Specifications are subject to change without prior notification. The RAD name and logo
are registered trademarks of RAD Data Communications Ltd. RAD product names are
trademarks of RAD Data Communications Ltd. ©2023 RAD Data Communications.
All rights reserved. Catalog number 802756, Version 01/23