Signet 2000 Micro Flow Rotor Sensor

Features
• Operating range 0.11 to 12.11 lpm
(0.03 to 3.2 U.S. gpm)

• Simple mounting

• ¼ in. NPT or ISO threads for simple pipe or

tubing connection

• Measures opaque and transparent liquids

• Low pressure drop

• Standard cable 7.6 m (25 ft)

The Signet 2000 Micro Flow Rotor Sensor is constructed Applications

of Polyphenylene Sulfide (PPS) which provides high
material strength. The 2000 offers two flow ranges • Coolant Flow
starting at 0.11 or 1.13 lpm (0.03 or 0.3 gpm), for clean • Dosing
process liquids, regardless of fluid color or opacity. • Batch Dispensing
• Not recommended for Strong Oxidizers
This sensor can be connected to flexible tubing or
rigid pipe, and uses standard hardware for mounting.
Only one moving part and a low pressure drop across
the sensor reduces operating costs and maintenance
requirements.

www.gfsignet.com
Specifications

General
Operating Range -11 & -12 version 0.11 to 2.6 lpm 0.03 to 0.7 U.S. gpm
-21 & -22 version 1.13 to 12.11 lpm 0.3 to 3.2 U.S. gpm
Linearity ±1.2% of full range
Repeatability ±0.5% of full range
Connections ¼ in. NPT (male) or ISO 7/1 - R1/4 (male)
Wetted Materials
Sensor Body and Cover 40% glass filled Polyphenylene Sulfide (PPS)
Rotor PEEK®, natural, unfilled
Cover O-ring FKM
Electrical
Power 5 to 24 VDC ±10%, regulated, 10 mA max.
Output Type Open-collector, sinking, 20 mA max.
Cable Length 7.6 m (25 ft), can be extended up to 300 m (1,000 ft)
Cable Type 2-conductor twisted pair w/shield, 22 AWG
Max. Temperature/Pressure Rating
0 °C to 80 °C @ 5.5 bar max. 32 °F to 176 °F @ 80 psi max.
Shipping Weight
0.03 kg 0.7 lb
Standards and Approvals
Manufactured under ISO 9001 for Quality and ISO 14001 for Environmental Management
and OHSAS 18001 for Occupational Health and Safety

See Temperature and Pressure graphs for more information.

Dimensions

Top View Side View Cover Removed

100 mm (3.94 in.) 81 mm

(3.2 in.)

36 mm
(1.42 in.)

Mounting tabs for metric M3 or

standard #6 screws on 68 mm
(2.68 in.) bolt circle

www.gfsignet.com
 Panel Mount Pipe, Tank, Wall Mount Automation System

Signet Instruments Signet Instruments 0486 Profibus Concentrator

8900 9900 9900-1P 9900-1BC with Rear Enclosure and Customer Supplied
9900-1BC 9950 9950 Programmable Logic Controller or
Programmable Automation Controller

System Overview

N/C

L OUT-

L OUT+

N/C

L IN-

L IN+

GND

DATA

+5V OUT

L IN-

L IN+

GND

DATA

+5V OUT

L IN-

L IN+
+
Profibus USB Out In S 3L Loop S3L Loop

+
Channel 7 Channel 6 Channel 5

PLC
Valve

ENTER
OR Address

Power
Signet 3-0486 Profibus Concentrator

Channel 1 Channel 2 Channel 3 Channel 4

24 VDC
0.40A Max S3L Freq S 3L Freq S 3L Freq S 3L Freq

+5V OUT

+5V OUT

+5V OUT

+5V OUT
Freq IN

Freq IN

Freq IN

Freq IN
PWR+

PWR+

PWR+

PWR-

PWR-

PWR-

DATA

DATA

DATA

DATA
GND

GND

GND

GND
Signet 2000 Flow
Sensor

All sold separately

Flexible tubing or rigid pipe
(customer supplied)

Application Tips
• For use in clean fluids - no suspended solids.
• Use the mounting tabs to secure the sensor to a
flat horizontal surface, ±30°.
• Verify chemical compatibility before installation.

Temperature/Pressure Graphs

Note:
The pressure/temperature graphs are specifically for the Signet sensor. During system design the specifications of
all components must be considered. In the case of a metal piping system, a plastic sensor will reduce the system
specification.

Low Flow High Flow

(psi) (bar) (psi) (bar)

30 2.1 30 2.1
Pressure Drop

Pressure Drop

20 1.4 20 1.4

low low
hF
wF 10 0.7 Hig
10 0.7 Lo

0
0
LPM 0 0.8 1.5 2.3 3.0 3.8 LPM 0 1.5 3.0 3.8 5.3 6.8 7.6 9.1 10.6 11.5
GPM 0 0.2 0.4 0.6 0.8 1.0 GPM 0 0.4 0.8 1.0 1.4 1.8 2.0 2.4 2.8 3.0

Please refer to Wiring, Installation, and Accessories sections for more information.
www.gfsignet.com
Ordering Information
Mfr. Part No. Code Flow Range End Fittings
Micro Flow Rotor Flow Sensor
3-2000-11 198 822 000 Low flow, 0.11 to 2.61 lpm (0.03 to 0.7 gpm) ¼ NPT threads
3-2000-12 198 822 001 Low flow, 0.11 to 2.61 lpm (0.03 to 0.7 gpm) ISO 7/1-R1/4 threads
3-2000-21 198 822 002 High flow, 1.13 to 12.11 lpm (0.3 to 3.2 gpm) ¼ NPT threads
3-2000-22 198 822 003 High flow, 1.13 to 12.11 lpm (0.3 to 3.2 gpm) ISO 7/1-R1/4 threads

Accessories and Replacement Parts

Mfr. Part No. Code Description
3-2000.390 159 000 248 Replacement rotor kit
1220-0029 198 820 049 Cover O-ring
2450-0620 198 820 051 Cover screw, each
5523-0222 159 000 392 Cable (per foot), 2 cond. w/shield, 22 AWG
3-8050-1 159 000 753 Universal junction box

3-2000.099 Rev H (07/18)

© Georg Fischer Signet LLC
3401 Aero Jet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. (626) 571-2770 • Fax (626) 573-2057 • www.gfsignet.com • e-mail: signet.ps@georgfischer.com
Specifications subject to change without notice. All rights reserved. All corporate names and trademarks stated herein are the property of their respective companies.

www.gfsignet.com