- - Uninstall
Click the start/program/ Thinget/TouchWin for TH/ unload or double click in the
setup package.
According to the step one, click the yes(Y) to confirm to uninstall the software.
click the confirm button. After uninstalling the software, please delete the catalogue folder.
- . Installation and uninstall the USB download cable
USB download cable is only suitable for TH, TG series HMI.
TH, TG series HMI support the USB2.0(USB-B) standard communication port. It is in the top right
corner on the back of HMI. It can realize high-speed downloading and its transmission rate can be
up to 480Mbps. This section will introduce how to install the USB download cable driver and
download the program.
Now USB download driver has two kinds of installation modes in the system of Win98, WinXP,
Win7- Bit. They are automatic installation and manual installation. It only can be installed
manually in the system of Win7-64Bit.
Automatic installation
Concrete operations
(1) choose the relevant USB drive setup bag according to the relevant operation system. Then
double click the installvista32.exe
(2) click the install button, then install the drive.
(3) use the USB download cable to connect HMI USB download port and computer USB port.
then give the HMI power again and download program.
. Manual installation
Concrete operation
(1) use the USB download cable to connect HMI USB download port and computer USB port.
Then give the HMI power again. The catalogue box find the guide of new hardware will
appear. Please choose no and click the next
(2) Choose the install from list or assigned address (advance then click the next
(3) choose include this place in the search in the option of search the best drive program in
those places Click the browse and find the relevant drive file. Click the confirm then
click the next
Win98 system should choose Win98. WinXP and Win7-32Bit system should choose
WinXP. Win7-64Bit system should choose Win7.
(4) Click the finish to install the drive successfully.
(5) Download program.
. Uninstall the USB download cable drive
Use the USB download cable to connect HMI USB download port and computer USB port.
Then repower the HMI, and right click the my computer to choose device manager Click the
universal serial bus controllers then you can see the information of installed USB drive such as
Thinget TH USB Device
According to above operation, choose the Thinget TH USB Device Right click to choose
uninstall
Click the confirm button, then the drive will be uninstalled.
Simplified project manufacture
The characteristic of TouchWin editing software is simple and fast. It provides an ideal editing
platform for beginners or those who have some basis. This chapter introduces the use method of
HMI editing software by a simple project manufacture.
Please confirm the HMI type and the communication equipment type before making
the screen. This is the premise of making the screen program and equipment operate
normally.
- create project
. open the software and click the standard tool bar icon or new in the file menu.
. Choose the correct HMI type.
. Set PLC port and choose the correct PLC type and set the communication parameters.
. Set download port. When Download port communicates without external equipment, please
choose don t use Download port When Download port communicates with external equipment,
please choose the correct equipment type and set communication parameters.
. Set expanded port like Download port. Please choose the unused equipment when expanded
port communicates without external equipment. Please choose the correct equipment type and set
communication parameters when expanded port communicates with external equipment.
Only TH765-NT3, TH765-NU3 needs to set expanded port. Please pay attention to the
operation.
. Input name, author and remarks according to requirement. Click the finish button at last, then
the project will be created.
- . Screen editing
We will make a simple button. The function is to set ON /OFF the PLC output terminal Y0.
Bit Button
Click the menu part/operate/bit button or icon click in the editing screen.
Object
Object type: set to Y0
operate
Button operation: set to reverse
button
text: input reverse
. Lamp
Click the menu part/operate/lamp or icon click in the editing screen, and set attributes in
the attribute catalogue box.
object
object type: set to Y0
- . Off-line simulation
To debug the program, you can simulate the program in the software without connecting the PLC.
. Click the menu file/off-line simulation or icon
. Click the reverse button. You can set ON and set OFF the Y0.
ON status OFF status
- . On-line simulation
Simulate practical operation situation of the HMI and PLC in the computer. Realize the monitoring
function for lower-computer. (PLC should be connected to computer, and the operation time of
on-line simulation should be within half an hour)
click the menu bar file/on-line simulation or on-line simulation icon the following
catalogue box will appear. Please click the ok button to enter the simulation screen.
on-line simulation only support equipment of Modbus RTU protocol. Such as XINJE
PLC, XINJE inverter and so on.
. Click the right key of mouse in the blank of screen. Choose the Com Port in the catalogue box,
and set the PLC Port to the serial port of connecting to the computer. The other keep default.
Close the COM Port catalogue box at last.
Log history record of logging in and quiting time
About informations about AutoWin version
Com Port the above catalogue box will appear. Set the computer serial port number which
is connected with HMI PLC port /Download port.
Exit exit
. Please click the right key of mouse in the blank area again after those operations above. Choose
the Exit to exit current on-line simulation operation, then open the on-line simulation again to
perform the simulation function for lower-computer PLC.
If communicating window appears in the on-line simulation screen, you need to
check if the setting is correct for PLC Port Then check if you open the simulation screen
again after exiting simulation operation. Then check if the serial port is occupied by other
softwares.
- . Program download
TouchWin software support two kinds of download style, and they are common download and
complete download. Please choose the revelant download cable to download according to different
kinds of HMI. This case uses USB download cable to download program. If you want to know the
serial port download, please refer to the HMI hardware handbook.
- - . Common download
Click the menu bar file/download or download icon then you can download the program.
This download style doesn t have upload function.
- - Complete download
Click the complete download icon then you can download the program. This download
style can upload the HMI program to computer.
the following versions can not support upload function
( ) V2.78 version doesn t have complete download function. So the program can not be
uploaded.
V2.99-V2.C.6 versions should set parameters in the software. Please choose the complete
download in tool/option and choose complete download
If the program has been downloaded to HMI and you didn t set as above before downloading,
program can not be uploaded into computer.
- - U flash disk download
Note: only suitable for V2.C.6d to V2.C.6i version software.
TH -U , TG -U , TG -E series HMI has USB-A(USB2.0) port. You can use U flash disk to
download HMI program to many HMI. The process of downloading is simple and fast.
Suitable occasion: the local with machine has no computer or it is far away from office, no
download cable, equipment need to upgrade and update program.
Concrete operations:
Click export project in the file menu.
. Following interface will appear in the editing screen. Please click ok button and export data.
. According to the above operations, open the C:\ in the computer to find Export.dat and copy it
into the U flash disk.
. Set the third DIP switch of HMI to ON. Then repower the HMI, and the following picture will
