Scribd
Upload
34 views

Elearn VLSI SOC Design User Guide

The document provides instructions for using an elearning portal, including how to log in, update contact details, take quizzes, view course materials, download labs, and generate a certificate upon completion.

Uploaded by

kaviinfoengg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

Elearn VLSI SOC Design User Guide

The document provides instructions for using an elearning portal, including how to log in, update contact details, take quizzes, view course materials, download labs, and generate a certificate upon completion.

Uploaded by

kaviinfoengg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Elearn Portal – User Guide

Setting Standards in VLSI Design

Elearn Portal – User Guide


1.You can log in to the elearn portal as shown in the figure below with your login credentials. https://elearn.maven-
silicon.com/login

To get the credentials search "[email protected]" in your email inbox

https://elearn.maven-silicon.com/ [email protected] 1 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

2. Once you login you will be directed to verify your contact details

Click on Edit option and update your contact number

3. Once you update your number click on verify number.

You will get a pop up saying sent OTP click on send.

https://elearn.maven-silicon.com/ [email protected] 2 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

4. You will we receiving the OTP from JM-MAVENS ID

Kindly update the OTP and verify your contact number.

5. Your mobile number is Verified now

Please fill up the sheet with your data.

https://elearn.maven-silicon.com/ [email protected] 3 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

1. After changing the password, Go to “My Dashboard” , you will be able to see the courses that you have
subscribed. Click on the “VLSI SoC Design using Verilog HDL” course to get the Course page.

2. There are multiple tabs in the Course Page. Reports tab to analyse the quiz that you have attempted, and
Discussion tab to post/view the queries. Curriculum tab to get the complete course agenda. Click on Start
learn to start the course.

https://elearn.maven-silicon.com/ [email protected] 4 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

3. After this, You can start your learning by watching videos from Scetion 1 as shown below.

https://elearn.maven-silicon.com/ [email protected] 5 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

4. You can take up the Quiz for every chapter by clicking on “Quiz # : Knowledge check” and then clicking on
attend as shown below.

5. On the next web page, you can go through the general instructions and click on the start test button to start the
test as below.

https://elearn.maven-silicon.com/ [email protected] 6 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

6. You can give the test as shown below and submit your answers.

7. After submitting the Quiz by clicking on Submit and finish button, you need to confirm submission as shown
below.

https://elearn.maven-silicon.com/ [email protected] 7 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

8. You can find your score and review your answers as shown below.

9. After Completion of SoC module, You can start learning Verilog HDL from Section 6. Again there are lecture
videos and knowledge check tests are available. You can take up the quiz in same maner.

10. Along with theory, you need to work on Verilog Labs also to get Hands on Exeperience. To work on Verilog
Labs, you need to Install Mentor Graphics Modelsim and Quartus Prime tools. You can find EDA Tools
Installation Guide in section #16 as shown below. After the installation practice the lab by referring to the Lab
manual. The lab solution Videos are also available.

https://elearn.maven-silicon.com/ [email protected] 8 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

11. Now you need to download Verilog Labs. For this, you need to click on Download the Verilog Labs Folder in
Section #16 and click on the Download button as shown in the below figure.

https://elearn.maven-silicon.com/ [email protected] 9 |P age


Elearn Portal – User Guide
Setting Standards in VLSI Design

12. After completion of the course you can generate Certificate as shown below.

https://elearn.maven-silicon.com/ [email protected] 10 | P a g e

You might also like