Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

(2) 50010-10-C5D Screws*

Torque arrestors: Ensure screws are tight
(2) 50010-12-C5D Screws*
and lock wired.
(4) 50910-C Lockwashers*
57 X
A/R Z6001 Lockwire ∅ .051
90471 TDS Torque Arrestor
BOM Items: 17, 18, 19 & 25
Note: For (1) Torque Arrestor

Solid body elevator plate: Ensure torque

arrestor retaining screws are tight and
lock wired.
(8) 50010-20-C5D Screws*
92954 - PH60 D Installation Kit
58 X (8) 50910-C Lockwashers*
A/R Z6001 Lockwire ∅ .051
95497 PH-85 Installation Kit

92956 - PH85 Installation Kit

Ensure wear bushing screws are tight and

lock wired.
(8) 50008-14-C8D Screw*
59 X (8) 50908-C Lockwasher*
115341 Solid Body Elevator Shoe
A/R Z6001 Lockwire ∅ .051
Assembly
BOM Items: 3, 4 & 5

Page 1 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

Solid Body Elevator: Ensure links are

upgraded to new style. Links have lower
pin welded in place and upper screws (2) 72433 Screws
60 fitted with castle nuts and cotter pins. X (2) 50520-C Nut, Hex-Slotted
(2) 51405-16-S Cotter Pin
94529 (BOM items #'s 4, 5 & 6) Solid
Body Elevator Assy

Link tilt retaining screws should be tight

and lock wired.
92954 - PH60 (2) 50016-28-C5D Screw*
BOM Items: 11, 34, 35 & 36 (2) 50016-26-C5D Screw*
61 X
(4) 50916-C Lockwasher*
95497 - PH85 A/R Z6001 Lockwire ∅ .051
92956 - PH85
BOM Items: 6, 11, 12 & 13

For Standard Reach Units:

Link Tilt: The hinge pin should be the (1) 30172033-501 Pin, Pivot*
new upgraded type with nut and cotter (1) 50520-C Nut, Hex Slotted*
pin. (1) 51404-16-S Pin, Cotter*
SB TDS-01-08 and retrofit kit drawing (1) 50820-R-C Flat Washer*
62 X
#30156872 (contains the needed parts For Extented Reach Units:
therefore parts not included here) (1)30172020 Pin, Pivot*
74587 Std. Link Tilt Assembly (1) 50524-C Nut, Hex Slotted*
82308 (Sheet 2 Zone D4) (1) 51405-20-S Pin, Cotter*
(1) 50824-R-C Flat Washer*

Page 2 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

(2) 51824-C Nut, Hex-Self

63 X
74587 Standard reach link tilt assy Locking
82308 Extended reach link tilt assy

Chains to be attached with double clevis

bolt, nut and cotter pin assemblies. SB
TDS-01-11 (4) Double clevis link assemblies
64 X
30171701 replaces 74967
74587
82308

Page 3 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

Ensure the Elevator Link clamps are the

latest design, fitted with lockwashers and
(8) 51808-C Nut, Hex-Self
self-locking nuts. SB TDS-01-10D Kit
Locking
65 #30157425 X
(8) 50908-C Lock Washer
74587 Standard reach link tilt assy
82308 Extended reach link tilt assy

Stop spring support to have flat washer

(2) 89037 Screw, Drilled
castle nut and cotter pin.
(2) 50508-C Nut, Hex Slotted
66 X
(4) 51402-8-S Cotter Pin
74587 Standard reach link tilt assy
(6) 50808-R-C-5 Flat Washer
82308 Extended reach link tilt assy

Page 4 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

(2) 30172181-04 Pin, Clevis

Stops and pivot to have cotter pins in
(2) 30172226 Pin, Clevis
pivot pins.
(2) 50312-C Nut, Hex-Jam
67 X
(2) 51402-8-S Cotter Pin
74587
(2) 51435-12-S Cotter Pin
82308 (sheet 2 Zone B/C 2)
(2) 50308-C Nut Jam

Stop release cable shackle to be fitted

with nut and cotter pin.
Shackle 30171883-10 or Varco
68 X
P/N 6987
74587
82308

Page 5 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

PH-85
PH-85
Stabbing guide castle nut and cotter pin
108362 6 5/8 Reg. Stabbing Guide Assy
(1) 50516-C Nut, Hex-Slotted
30115170 API Stabbing Guide Assy
69 X (1) 51437-16-S Pin, Cotter
99302 NC50 Stabbing Guide Assy

Flipper pin retained with cotter pin and

(6) 51402-6-S Cotter Pin
springs

Jaw assembly pin, jam nut and cotter pin

95461 Rev.V (Sheet 4 Zone A/4) PH-85
PH-85
Torque Wrench Assembly
(2) 51402-10-S Cotter Pin
Ensure the jaw assemblies are correct in
70 X (2) 50508-C Slotted Nut
accordance with SB TDS-00-04
(2) 30174533 Pin
(2) 50808-R-C-5 Flatwasher
Die retainer screws wirelocked
(2) 50812-N-C Flatwasher
95461 Rev.V (Sheet 4 Zone C/6)
117322 (Sheet 4 Zone B/5)
PH-85
Ensure the jaw assemblies are correct in
(2) 51402-10-S Cotter Pin
accordance with SB TDS-00-04 PH-85
(2) 50508-C Slotted Nut
Jaw assembly pin, jam nut and cotter pin
(2) 30174533 Pin
(2) 50808-R-C-5 Flatwasher
PH-85: 95461 Rev.V (Sheet 4 Zone C/4 &
71 X
D/4)
PH-60
BOM Items: 22, 42, 68, 86 & 72
(2) 76444-1 Bolt, Retainer*
(2) 76444-2 Bolt, Retainer*
PH-60: 117322 (Sheet 4 Zone A/6 & B/6)
(4) 50514-C Nut, Hex Slotted
BOM Items: 52, 53, 71 & 113
(4) 51435-16-S Pin, Cotter

Page 6 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

95461 Rev.V (PH-85) BOM Items: 14,

PH-85
59 & 73
(2) 30172075 Pin
(2) 50824-N-C Flat Washer
Clamp clevis to clamp body pins secured
(2) 50524-C Nut, Hex Slotted
with cotter pin.
(2) 51405-22-S Pin, Cotter
72 X
PH-60
No action required if tool was
PH-60 Torque Wrench Assembly
built after 5/1/92 or the pin
117322 Sheet 2 Zone B/1
retention kit # 97562 has been
Provides list of parts for referrence.
retrofitted per Varco Service
BOM itmes 102, 51, 80, 70, 108, 50, 94
Bullletin 92-2
& 142

Torque cylinder gland screws

SB TDS-02-01
73 X See TDS-02-01
90180 PH-85 Hyd. Cylinder (Vendor
Item Drawing)

Page 7 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

PH-85
(2) 90844-1 Pin, Clevis*
PH-85 95461 Rev.V (Sheet 3 Zone B/7)
(2) 30156344 Keeper, Pin*
BOM Items: 51, 74, 75 & 2
(4) 50908-C Washer, Lock*
(4) 50008-10-C5D Screw, Drilled
Torque tube pin retention plate
74 X HD*
wirelocked
A/R Z6001 Lockwire ∅ .051
PH-60
PH-60 117322 (Sheet 2 Zone B/3)
(2) 30172078 Pin, Clevis*
BOM Items: 68, 99 & 111
(2) 50328-C Nut, Jam*
(2) 51406-24-S Pin, Cotter*

Make Break handle to be drilled and

safety wire attached
75 X
95461 Rev.V

Manifold screws to be wirelocked.

76 X A/R Z6001 Lockwire ∅ .051
95461 Rev.V (Sheet 5 Zone C/2)

Page 8 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

Make / Break plate wirelocked.

77 119735 PH-85 Manifold Assy X A/R Z6001 Lockwire ∅ .051

(Plate obsolete on new builds)

Stop tube pins retained with cotter pins

PH-60 & PH-85
95461 Rev.V PH-85 (Sheet 3 Zone C/6) (2) 30172099 Pin
78 BOM Items: 19, 57, 78 & 86 X (2) 50508-C Nut, Hex Slotted
(2) 50808-N-C Flatwasher
117322 PH-60 (Sheet 2 Zone C/4) (2) 51435-12-S Pin, Cotter
BOM Items: 49, 67 112 & 115

95461 Rev.V PH-85 (Sheet 3 zone C/7)

BOM Items: 29, 34, 71 & 78
PH-60 & PH-85
(1) 82042 Pin, Upper
Upper and lower lift cylinder pins fitted
79 X (1) 82045 Pin, Lower
with nuts and cotter pins.
(2) 50512-C Nut, Hex Slotted
(2) 51435-12-S Pin, Cotter
117322 PH-60 (Sheet 2 zone C/4 & C/6)
BOM Items: 70, 104, 105 & 112

Page 9 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

Lift cylinder pad eye wirelocked PH-60

(4) 80541 Screws*
95461 Rev.V PH-85 (Sheet 4 Zone B/5) (4) 50910-C Lockwashers*
BOM Items: 76, 81, 88 A/R Z6001 Lockwire ∅.051
80 X
PH-85
117322 PH-60 (Sheet 2 Zone B-C/4) (4) 50010-24-C5D Screws*
BOM Items: 55, 94 & 142 (4) 50810-N-C Flatwashers*
A/R Z6001 Lockwire ∅.051

PH-60 (Rear)
(2) 30172050 Pin
(2) 50310-C Nut, Jam
(2) 51435-12-S Cotter Pin
(Mid)
117322 PH 60 (Rear: Sheet 4 Zone B/9)
(2) 95704 Pivot Pin
117322 PH 60 (Mid: Sheet 2 Zone B/5) (4) 50006-10-C5D Screws
(4) 50906-C Lockwashers
Rear: Actuator arm pins retained with (2) 95698 Retainer Plate
jam nut and cotter pins AR Z6001 Lockwire ∅.051
PH-85 (Rear)
81 X
95461 Rev.V PH 85 (Sheet 4 Zone A/3 & (2) 30173764 Pivot Pin
B/4) (2) 50812-N-C Flat Washer
(2) 51606-06-C Roll Pin
Mid: Actuator Arm Pins retained with (2) 50512-C Nut, Slotted
(2) 51435-12-S Pin Cotter
plates and lockwired screws.
(Mid)
(2) 30173762 Pivot Pin
(2) 30173763 Retainer Plate
(4) 50006-08-C5D Screws
(4) 50906-C Lockwashers
AR Z6001 Lockwire Æ.051

Page 10 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No
117322 PH-60 (Sheet 4 Zone A/7) PH-60
BOM Items: 74, 96 & 142 (2) 30172060 Nut
See Delta Note 6 AR Z6001 Lockwire ∅.051
(2) 50914-C Lockwasher
Cam follower retained with torqued nut PH-85
82 X
lock washer and lockwire (2) 30172060 Nut
(2) 50914-C Lockwasher
95461 Rev.V PH-85 (Sheet 4 Zone A/4) Requires drilling .125 ∅ Hole in
actuator arm. For Lockwire Both PH-
60 & PH-85

Air actuator by-pass valves handles to be

fitted with safety wire.

95461 Rev.V PH-85 (Sheet 3, Zone C/1) (2) 30172159 Retaining Ring
83 X
BOM Item: 89 AR Z6001 Lockwire ∅.051

117322 PH-60 (Sheet 3 Zone A-B/6)

BOM item # 30

PH-85
Stop tube retained with nut and cotter pin
(2) 50508-C Nut, Hex Slotted
(2) 51402-8-S Pin , Cotter
95461 Rev.V PH-85 (Sheet 3, zone D/6)
84 BOM Items 86 & 87 X
PH-60
(2) 50508-C Nut, Hex Slotted
117322 PH-60 (Sheet 3 Zone A/4)
(2) 50908-C Washer, Lock
BOM Items: 67, 93 & 108
(2) 51402-12-S Pin , Cotter

Page 11 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

IBOP Actuator cylinder adjustment nuts

PH-85 only
with cup point set screw.
(4) 79028 Nut, Lock-modified
85 X (4) 50704-3BC Screw, Cup Point
95461 Rev.V (PH-85 only) Sheet 3 Zone
Set
C/6
(4) 50812-N-C Flat Washer
BOM Items: 48, 62 & 72

PH-85
Guard pins fitted with washer, slotted nut (4) 30172053 Pins
and cotter pins. (4) 50516-C Slotted Nut
(4) 51435-16-S Cotter Pins
95461 Rev.V PH-85 (Sheet 3 zone D/3) (4) 50816-N-C Flatwasher
86 BOM Items: 55, 69, 79 & 92 X PH-60
Lower Guard
117322 PH-60 (Sheet 2, zone D/2 & (1) 30172033 Pin
Sheet 4 Zone C/2) (1) 30172033-500 Pin
(2) 50520-C Nut, Hex slotted
BOM Items: 101, 123, 69 & 114
(2) 51405-16-S Cotter Pin
PH-85
95461 Rev.V PH-85 (Sheet 3 Zone B/1) (2) 30172090 Pin
BOM Items: 21, 55, & 93 (2) 50516-C Nut, Hex Slotted
(2) 51437-16-S Pin, Cotter
Stabbing guide pivot pin retained with
87 X
split pin. PH-60
(5) 50012-20-C5D Screw
117322 PH-60 (Sheet 2 Zone B/1-2) (5) 50912-C Lockwasher
BOM Items: 63, 95 & 142 (2) 50817-C Washer, Flat
AR Z6001 Lockwire ∅.051

Page 12 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

Check fasteners for tightness and Comply with product bulletin and
wirelocking. installation of free kit #
30173840
PH-85 only
95461 Rev.V, 114802 or 116381
88 X Kit contains:
(2) 30173842 Shoulder Bolts*
See Product Bulletin TDS-02-08A (1) 53306-08-C 1/8" Drill bit*
and kit drawing 30173840 for parts Z6001 Lockwire ∅.051
and instructions Kit drawing

PH-85
(4) 50012-22-C5D Screw, Drilled
PH Frame to torque cylinder frame
Head*
screws wire locked
(4) 50912-C Washer, Lock*
A/R Z6001 Lockwire ∅.051*
89 95461 Rev.V PH-85 (Sheet 4 Zone X PH-60
A/6-7) (4) 50012-22-C5D Screw, Drilled
BOM Items: 60, 83 & 85 Head*
Dowel retention method (4) 51012-C Washer, Heavy
117322 PH-60 (Sheet 2 Zone B/3) Lock*
BOM Items: 64, 98 & 142 A/R Z6001 Lockwire Æ.051*

Name Plate
Name plate can be drilled and
safety wired if acces is available.
90 95461 Rev.V PH-85 (Sheet 3 Zone B/3) X
No known reports of all 4 drive
screws failing.
117322 PH-60 (Sheet 2 Zone C/3)

Page 13 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

95461 Rev.V PH-85 (Sheet 3 Zone B/6) PH-85

BOM Items: 75 & 81 (4) 50008-10-C5D Screew, Drilled
Hex Head*
A/R Z6001 Lockwire ∅ .051*
Torque tube Guide Ring screws wire
91 X PH-60
locked.
(4) 50008-13-C5D Screw, Drilled
Head*
117322 PH-60 (Sheet 2 Zone B/3) (4) 50908-C Lockwasher*
BOM Items: 61, 93 & 142 A/R Z6001 Lockwire Æ .051*

Make Break handle retaining screw to be

drilled and safety wire attached.

Make Break handle to be drilled and

safety wire attached
92 X A/R Z6001 Lockwire ∅ .051
95461 Rev.V PH-85 (Sheet 3 Zone C/3-
4)

117322 PH-60 (Sheet 3 Zone B/2)

Make / Break plate wire locked or

removed and Manifold hard stamped.

Manifold screws to be wire locked

93 X A/R Z6001 Lockwire ∅ .051

Gauge wired to prevent falling

95461 Rev.V

Page 14 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

Metal dust plugs, caps and chains

removed from QD’s
SB TDS - 02 - 14 Remove, and save for rig down
and rig move.
94 119735 PH 85 (Sheet 2 Zone B-C/8) X
BOM Items: 29 & 30 Note: It is imperative that the
caps be installed when not in use.
82702 PH-60 (Sheet 1 Zone B-C/3-4)
BOM Items: 27 & 28

IBOP actuator base clevis pin PH-85

retension (2) 51435-12-S Cotter Pin
(2) 50510-C Nut, Slotted
95461 Rev.V PH-85 (Sheet 3 Zone (2) 30173769 Pin
95
C/6) (2) 50810-N-C Flat Washer
BOM Items: 54, 56, 78 & 88 PH-60
Pins captured by installation
117322 PH-60 (Sheet 3 Zone B/5-6) arrangement

Page 15 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-
 Picture Book Index/Checklist For Pipe Handler PH-60 and PH-85

Picture Matches Picture Corrected

Description Action Required
No Yes No

96 Void Duplicate

97 Void

Check Completed out By_______________________________ Company

_______________________ Date___________________

Approved By__________________________________________ Company

________________________ Date___________________

Page 16 of 16
November 4, 2003
* Components supplied with original equipment. Part numbers listed for reference. 3QA000114-