Index: L / 923-1485

Metal Diaphragm Pressure Switches D1T/D2T

Mechanical single/dual pressure switch
Repeatability ±1.0 % at constant temperature

Features
► Metal diaphragm pressure switch
► Wetted parts welded
► Direct acting, no friction, high accuracy
► Approvals: Ex ia, UL, CSA, marine, SIL2/3 (IEC 61508)

Adjustment ranges
0.005 ... 10.3 bar and
-0.006 ... -1 bar (Vaccum)

Applications
Machine and tool engineering,
Autoclaves, pump control,
Refrigerant monitoring, chemical industry
Ship building applications

Technical Data
Wetted parts: Stainless steel 17 - 7PH / SS304 Intrinsically safe: The switches are also available for
intrinsically safe applications. In
Repeatability: ±1 % at constant temperature this case we recommend gold
Switching rate: max. 20/min contacts. Add "Exi" in case of
ordering. Maximum rating
Temperature range: -40 °C... +75 °C according to ATEX:
Protection class: IP65 Umax = 28 V Imax = 50 mA
Housing: Top part: aluminium powder coated Approval: Cert. No.: TÜV 20 ATEX 248753X,
bottom part: aluminium anodized IECEx TUN 21.0002X

Process connection: 1/4" NPT female thread D1T, D2T:

Optional: 1/2" NPT female thread (Ex) II 1 G Ex ia IIC T6 Ga or
(P2) II 1 D Ex ia IIIC T200 100°C Da
Electrical connection: WAGO terminal and cable gland -40 °C < Ta < +75 °C
M20 x 1.5; Ui = 28 V Ii = 50 mA Pi = 0.84 W
clamping range ø 5 ... 11 mm Ci, Li = negligibly small
Electrical load capacity Many micro switch versions with
and hysteresis: different switching powers and D1T with connector ST1, D2T with
hysteresis are available and make it connector ST3:
possible to make customized (Ex) II 1 G Ex ia IIB T6 Ga or
changes. II 1 D Ex ia IIIC T200 100°C Da
Weight: D1T-...: approx. 1.0 kg -40 °C < Ta < +75 °C
D2T-...: approx. 1.1 kg Ui = 28 V Ii = 50 mA Pi = 0.84 W
Set point adjustment: Turn the adjustment screw Ci, Li = negligibly small
clockwise to decrease the set point

Pressure Ranges
Pressure range Adjustment range [bar] Max. operating Proof pressure The resulting hysteresis is approx. ...
code pressure [bar] [bar] bar at the end of range
Increasing press. Decreasing press. short term H, GH [bar] M, GM [bar]
Overpressure
2SS 0.005 ... 0.11 0.001 ... 0.11 0.13 . 0.2 . 0.004 . 0.006 .

3SS 0.012 ... 0.20 0.002 ... 0.196 0.47 . 0.7 . 0.005 . 0.010 .

18SS 0.050 ... 1.20 0.030 ... 1.20 2.7 . 4.0 . 0.018 . 0.040 .

80SS 0.300 ... 5.50 0.030 ... 5.30 7.1 . 10.7 . 0.110 . 0.240 .

150SS 0.500 ... 10.30 0.100 ... 9.90 13.3 . 20.0 . 0.190 . 0.420 .

Vacuum
3SS -0.006 ... -0.20 -0.002 ... -0.196 0.13 . 0.2 . 0.004 . 0.009 .

18SS -0.040 ... -1.00 -0.020 ... -0.970 0.67 . 1.0 . 0.030 . 0.060 .

Barksdale ®
Subject to technical changes. 1
Metal Diaphragm Pressure Switches
Pressure D1T/D2T

Dimensions (mm / inch)

Electrical Ratings
Micro Special features Volt AC Ind. load Res. load Volt DC Ind. load Res. load Comments
switch 50/60 Hz A A A A
Micro switch with silver 6 Small hysteresis;
contacts 125 10 10
H to 0.50 0.5 High AC-/
250 10 10
. .

24 low DC-load
Micro switch with silver 12 5.00 15.0 Medium hysteresis;
contacts 125 10 10
M 24 1.00 2.0 High AC- and
250 10 10
250 0.25 0.4 DC-loads
GH Micro switch with gold 125 . 1 . 1 . 24 . 1.00. 1.00 .
Small hysteresis
contacts for low voltage and/
GM or low current (e. g. "Exi") 30 . 0.1 . 0.1 . 30 . 0.10. 0.1 . Medium hysteresis

Options
D1T-... D2T-...
ST1 Plug, 3-pin + E, DIN EN 175 301-801 (prev. DIN 43650) ST3 Plug, 6-pin + E, DIN 43651
EXI for intrinsically safe application EXI for intrinsically safe application

Order Code
Example for order number

Type Micro switch Pressure range code Options Approval

D1T or D2T - GH 3SS - ST1 - EXI

Your order number

Type Micro switch Pressure range code Options Approval
or - - -

2 Subject to technical changes. Barksdale ®