Scribd
Upload
39 views3 pages

Design of Beam B1

This document provides design details for beam B1, including its dimensions, materials, reinforcement requirements, and spacing checks. The beam is 5700mm long with a 350mm width and 450mm depth. Reinforcement is required at the bottom and top along the beam length. Shear and torsional reinforcement is also designed and spacing is checked against code requirements.

Uploaded by

cyrus juaneza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views3 pages

Design of Beam B1

This document provides design details for beam B1, including its dimensions, materials, reinforcement requirements, and spacing checks. The beam is 5700mm long with a 350mm width and 450mm depth. Reinforcement is required at the bottom and top along the beam length. Shear and torsional reinforcement is also designed and spacing is checked against code requirements.

Uploaded by

cyrus juaneza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DESIGN OF BEAM B1

Group : G1
Beam No : B1
Analysis Reference
: 5 (4.5 m)
(Member)
Beam Length : 5700 mm
Breadth (B) : 350 mm
Depth (D) : 450 mm
Effective Depth (d) : 380 mm
Design Code : NSCP C101 - 2015
Beam Type : Ductile Beam (Special Frame)
Grade Of Concrete (f'c) : C28 N/sqmm
Grade Of Steel (Main) : Fy414 N/sqmm
Grade Of Steel (Shear) : Fy414 N/sqmm
Grade Of Steel - Flexural
: Fy414 N/sqmm
Design
Grade Of Steel - Shear
: Fy414 N/sqmm
Design
Grade Of Steel - Torsion
: Fy414 N/sqmm
Design
Clear Cover (Cmin) : 40 mm
Es : 2x10^5 N/sqmm
Mubal : 352.99 kNm
As,min (flex) (B) : 449.76 sqmm
As,nominal (Bn) : 172.9 sqmm
As,min(user input)(B') : 172.9 sqmm
Maximum percentage steel
: 4 %
(User Defined)
Maximum percentage steel Min (4 ,
:
(Special Frame) 2.5)
: 2.5 %
Strength Reduction Factor φ
: 0.75
(Shear)

For Longitudinal Reinf


Beam Bottom Beam Top
Left Mid Right Left Mid Right
Critical L/C - Analysis 14 14 16 16 14 14
Critical L/C - RCDC 5 5 5
Mu (kNm) 33.57 39.56 25.03 94.05 10.85 102.55
As (flex) (sqmm) (C) 240.97 284.77 178.88 696.42 77.02 762.93
Asc (flex) (sqmm) (A) - - -
Tu (kNm) 0.39 0.39 0.32 0.32 0.39 0.39
Tcr/4 (kNm) 5.07 5.07 5.07 5.07 5.07 5.07
Al, min(sqmm)(Tor.) - - -
(D)
Al (sqmm) (Tor.) (E) - - -
Al (Dist) (sqmm) (D) - - -
Ast (sqmm) 402.12 378.74 402.12 696.42 172.9 762.93
AstPrv (sqmm) 603.18 1005.3 603.18 1005.3 603.18 1005.3
Reinforcement 3-#16 5-#16 3-#16 5-#16 3-#16 5-#16
Provided

Note: Calculation of Ast

Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B)
Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B)
Ast = Bn (for Mu = 0)
Where,
Compression reinforcement required for
A = Asc (flex) =
bending moment
B = As,min (flex) = Min area of flexural reinforcement
Bn = As,nominal = Nominal area of reinforcement
Total area of longitudinal reinforcement
C = As (flex) =
calculated at a given section
Distributed longitudinal torsional
D = Al (Dist) =
reinforcement at section considered
Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B +
Ast (Dist) (sqmm) =
2D))

For Transverse Reinf


Left Mid Right
Critical L/C - RCDC 7 7 5
PtPrv (%) 0.756 0.756 0.756
Vu (kN) 74.67 55.39 78.66
Mu-Sect (kNm) 94.05 31.73 102.55
Φ Vc (kN) 0 0 0
Vs (kN) 99.56 73.85 104.88
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 632.83 469.42 952.06
Tu (kNm) 0.32 0.32 0.39
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 632.83 469.42 952.06
Asv Reqd (sqmm/m) 632.83 469.42 666.64
For Sway Shear
VD+L (kN) 57.57 39.56 57.34
Mh (kNm) 181.45 0 181.45
Ms (kNm) 112.77 0 112.77
Sway-Right (kN) 2.58 15.43 112.33
Sway-Left (kN) 112.56 94.55 6.12
Vu-Sway (kN) 112.56 94.55 112.33
Vud (kN) 112.56 94.55 112.33
Φ Vc Sway(kN) 0 0 0
Vs Sway(kN) 150.08 126.07 149.78
Asv Reqd Sway(sqmm/m) 954 801.36 952.06
Asv Reqd Final = max (Asv 954 801.36 952.06
Reqd , Asv Reqd Sway )
(sqmm/m)
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 95 165 95
SPrv (mm) 95 165 95
Av Total Prv (sqmm/m) 1653.47 952 1653.47

Maximum Spacing Criteria

Basic
0.33 Sqrt(f'c)Bd = 230.5 kN
Left Mid Right
Vs (kN) 99.56 73.85 104.88
Vs <= 0.33 Vs <= 0.33 Vs <= 0.33
Check
Sqrt(f'c)Bd Sqrt(f'c)Bd Sqrt(f'c)Bd
Spc1 (mm) d/2=190 d/2=190 d/2=190
Spc2 (mm) 600 600 600

For Torsion
(X1 = 280, Y1 = 380)
Spc3 = 300 mm
Spc4=(X1+Y1)/4 = 165 mm

For Ductility (Special Frames)


Left Section, Right Section

= 96 mm
Spc5 = 6 x Small Longitudinal Dia
Spc6 = d / 4 = 95 mm
Spc7 = 150 mm
Provided Spacing = 95 mm

Mid Section
Provided Spacing = 190 mm

Skin reinforcement

Beam Width = 350 mm


Beam Depth = 450 mm
Depth = 450 <= 900, Hence Skin Reinforcement is not required.

You might also like