Scribd
Upload
148 views

A50 Manual English

The document provides instructions for setting up and using an A50 WiFi audio amplifier. It describes what is included in the package, interfaces and functions of the device, technical specifications, how to install and configure it using an app or web console, and play music from various sources.

Uploaded by

ziphajl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
148 views

A50 Manual English

The document provides instructions for setting up and using an A50 WiFi audio amplifier. It describes what is included in the package, interfaces and functions of the device, technical specifications, how to install and configure it using an app or web console, and play music from various sources.

Uploaded by

ziphajl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

A50 User Manual

Contents

 SA50 main unit x1


 Power supply x1
 RCA cable x2
 Antennas x2
 QSG x1

Interfaces and Functions

WiFi Antenna: Used for WiFi connection


WPS: Used to activate the device hotspot when necessary
Line input: Analog input used to connect audio devices via an RCA cable
Line output: Analog pre-audio output to other devices
Network connection: RJ45 used to connect to a wired Ethernet network
USB input: Used to connect local storage devices
Speaker terminals: Phoenix speaker terminal used to connect to speakers
Power input: DC power input used to connect the power adaptor
Bluetooth antenna: Used to pair with mobile devices using a popular wireless service

LED: Indicates the status of the device


Blinking White: Power on or Network Connecting
Solid White: Network connected, WiFi and USB mode
Solid Blue: Bluetooth mode; Solid Green: Line Input mode
IR: IR receiver window for remote control
Technical Specifications

Wireless network IEEE802.11 b/g/n 2.4G


Connectivity LAN single 10/100M RJ45
Bluetooth 4.0
Frequency Response 20Hz to 20kHz
Power input DC 32V, 5A
Audio Source Input USB 2.0, Analog RCA
Audio Source Output Analog RCA
Speaker impedance 4-16 ohms
Dimensions: 14.7x10.8x3.7CM
Music format MP3/AAC/AAC+/ALAC/APE/WAV
Decoding Up to 24bit/192kHz

Remote Control

Standby (power on/off the WiFi)


Playall: To play all zones
Mute
AUX IN: Playing in LINEIN mode
BT: Playing in Bluetooth
WiFi: Playing in WiFi mode
USB: Playing in USB mode
Volume up
Volume down
Next

Previous

Pause/play
EQ: Classical, Pop, Rock, Jazz modes
Bass+/Bass-: Bass tune
Treble+/Treble-: Treble tune

save the program to favorite

Numbers 1-6 for preset, any program with icon can


be saved as preset.

Installation Guide

1. Unpack: Verify all the accessories are included in the package.


2. Place: Put the amplifier at a safe and proper location.
3. Connect
Speaker Wire Connection
Properly wire the male phoenix connectors on the amplifier, noting positive and
negative terminals match with the positive and negative terminals on your
speaker.
Power connection
Power the amplifier with the power adaptor included in the accessories.
4. Download the App
Download the MUZO application from the App Store for iOS and Google Play for Android.

5. Configure
Option 1- Configuration via app
Step 1: Connect your mobile devices to your network.
Step 2: Open the MUZO application> press Add Device(+)
Step 3: Go for mobile device settings> Connect mobile device to hotspot SoundSystem_xxxx
Step 4: After connected, back to the MUZO app > the app will jump to configuration
step>choose the 2.4G network, enter password>wait for the device to be configured.
Option 2- Configuration via Web console
-1. Power the device.
-2. Choose the hotspot(SoundSystem_xxxx) in the WiFi setting on your cell phone or computer
and connect to it.
-3. Open the web browser and enter 10.10.10.254
-4. Go for WiFi>choose you 2.4G router>enter password> click connect> Device will be
connected> the device will show on the app.

Option 3-Connection via LAN


-Power the device
-Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10
seconds.
Option 4-Bluetooth pair
Open the app>choose the Bluetooth mode > open the Bluetooth on the mobile device >Pair to
device Bluetooth “SoundSystem”> once connected, you will hear a sound prompt.

Device Settings:
Rename: to customize the device name

Speaker info: you will see the device


information like MAC ID, device IP, SSID etc.

Preset content: you will see all the preset


contents here

Sleep timer: Countdown to stop the music


App Photo Gallery:
Playback Your Device List will show all available zones. Press a zone to see the
information on the current source. While on the view for the source, swipe right to
reveal the available sources. From there, you can select what source you want to hear
next, or swipe left to return to the currently playing source.

You also have the ability to combine


zones so that each zone is playing
the same source at the same time.
Just press your finger on the zone
you want to play what another zone
is playing until it indicates it is
ready to merge. Then, drag it on top
of the master zone and release.
In roughly 30 seconds, the zones will
combine.
To separate zones, repeat the process,
but this time drag the zone you want to
free below the dotted line.
Play mode switch

1. Use the remote control to switch the modes: WiFi, Bluetooth and Aux input.
Please note: before changing modes, have to get each mode ready.
2. Changing play mode on the app, choose different modes on the source playback, choose to
play in LINE IN or Bluetooth mode. Please note, back to WiFi play mode, only need choose
any online source or any music from “MY MUSIC”.

Play Sources
On the application, you can play music from
1) online sources from Spotify, Tidal, TuneIn, Napster and so on(some need premium account);
2) local music(local storage from mobile device-cell phone and tablets, home NAS, USB flash drive
or hard disk drive), it will show on “MY MUSIC”;
3) music playing in Aux Input(from cell phone, PC, MP3 or CD Player…) and Bluetooth mode.

Firmware update

The application will notify you in your app when there is a new firmware version
available. It’s recommended to update firmware whenever available as this might not
only correct bugs or improve security, but could also add new features or services.
FAQ
Q: Do your devices support airplay and third-party DLNA apps?
A: Yes. They support airplay and third-party apps like BubbleUPNP…
Q: How many zones can you group in one system?
A: 12 rooms is the maximum, while 8 zones are recommended.
Q: What distance can your wireless audio system cover?
A: Once the system is connected to your WiFi router, you can stream your music anywhere there
is a WiFi signal.
Q: Can it play high resolution music?
A: Yes. Our devices can play APE and FLAC within the normal bit rate range. They also support
decoding 24bit/192kHz music files.
Q: How many languages do you support?
A: Our devices will auto-detect your mobile device language and change automatically. Currently,
we support English, French, German, Spanish, Chinese, Portuguese, Korean and Japanese and
more on the way.
Q: What online music services do you support?
A: Spotify, Tidal, iHeartRadio, TuneIn, Napster, and more, with more pending.
Q: Can I play local music?
A: Yes. You can play music from “MY MUSIC” on the application from local storage devices such
as mobile device storage, USB thumb drives, portable hard disk and NAS.
Q: Can the device work with Windows devices?
A: The Windows application is not available at the moment, but on the Windows PC, users can
use iTunes, Foobar2000 and Spotify connect as a line input.

Website: www.arylic.com
Facebook: arylic
Support: [email protected]

@Copyright 2018 by Arylic. All Rights Reserved.


The information contained in this guide is believed to be accurate and reliable. Arylic assumes no
responsibility for any errors contained in this guide. Arylic reserves the rights to make changes in
the specifications and/or design of the above mentioned product without prior notice. The
diagrams contained in this guide may also not fully represent the product that you are using and
they are for illustration purposed. Arylic assumes no responsibility for any differences between
the product mentioned in this guide and the product you may have.

You might also like