Forecasting of wind power generation

Submitted by,

G. Hasini
G. Hedanth reddy
S. Sai Balaji
K. Ashirashree
In partial fulfillment for the course of

Basic Electrical and Electronics Engineering

(211EEE1301)

SCHOOL OF FRESHMAN ENGINEERING

KALASALINGAM ACADEMY OF RESEARCH AND EDUCATION

KRISHNANKOIL 626 126

May 2024
 KALASALINGAM ACDAEMY OF RESEARCH AND EDUCATION
KRISHNANKOIL 626 126

DECLARATION BY THE STUDENT

School of freshman Engineering

We hereby declare that this project “Forecasting of wind power generation” is our genuine
work and no part of it has been reproduced from any other works.
REGISTER. No: STUDENT NAME STUDENT SIGNATURE

9923008035 G. Hasini

99230040313 G. Hedanth reddy

99230040417 S. Sai Balaji

99230040339 K. Ashirashree

Date:
 KALASALINGAM ACDAEMY OF RESEARCH AND EDUCATION
KRISHNANKOIL 626 126

BONAFIDE CERTIFICATE

School of freshman Engineering

Certified that this project report “Forecasting of wind power generation” is the bonafide work
of “G. Hasini(9923008035), G. Hedanth Reddy(99230040339), S. Sai Balaji(99230040417),
K. Ashirashree(99230040313)” who carried out the project work under my supervision.

Dr.M. Krishnaparamathma

Course Teacher
Assistant Professor
School of freshman Engineering
Kalasalingam Academy of Research and Education

Project Final Review Viva-voce held on _______________

Internal Examiner External Examiner

 ACKNOWLEDGEMENT

We are extremely thankful and indebted to Dr. K. Sridharan (Chancellor),

Dr. S. Arivazhagi (Pro-Chancellor), Dr. S. Shasi Anand (Vice President), Mr. S.
Arjun Kalasalingam (Vice President), Dr. S. Narayanan (Vice Chancellor), Dr.
V. Vasudevan (Registrar), Dr. N. Rajini (Dean / FE) and Dr. A. Koteswararao
(Director, Academics) Kalasalingam Academy of Research and Education who
have given us the facilities to do our project work successfully.

We acknowledge with a sense of gratitude of sincere thanks to Dr.M.

Krishnaparamathma, AP/ FE who is the Project mentor, for extending their support
and encouraging by giving constructive criticism during the project period. Also,
we thank basic electrical and electronics laboratory technician for their help for the
successful completion of our project.

In a special way, we submit my grateful thanks to our parents who provided

us all the supports throughout the period of project development. We also render
our deep thanks to our friends and well-wishers who had been a source of
encouragement throughout the period of project development.
 ABSTRACT

Abstract of the report should be of one page (300 words) and shall include the purpose of
the study; the methodology used and a summary of the major findings, conclusions and
recommendations.

<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
 LIST OF TABLES

S. NO. TITLE PAGE NO

1.1
2.1
2.2
3.1
3.2
4.1
4.2

The list should use exactly the same captions as they appear above the tables in the text.
The list should be prepared with 1.5 line spacing.
 LIST OF FIGURES

S. NO. TITLE PAGE NO

1.1
2.1
2.2
3.1
3.2
4.1
4.2

The list should use exactly the same captions as they appear below the figures in the text.
The list should be prepared with 1.5 line spacing.
 TABLE OF CONTENTS

CHAPTER NO. TITLE PAGE NO

ABSTRACT i
LIST OF TABLES ii
LIST OF FIGURES iii
1 INTRODUCTION 1
1.1 General
1.2 Sub-topics
2 COMPONENTS USED
2.1 Sub-topics 1
2.2 Sub-topics 2
3 METHODOLOGY
3.1 Sub-topics 1
3.2 Sub-topics 2
4 RESULTS AND DISCUSSION
4.1 Sub-topics 1
4.2 Sub-topics 2
5 CONCLUSION AND FUTURE WORK
REFERNCES
 CHAPTER 1

INTRODUCTION

Explain the Introduction (Common concept etc) about your project

Sections - A chapter can be divided into Sections, Sub-sections and Sub-sub-sections so

as to present different concepts separately. Sections and sub-sections can be numbered
using decimal points, e.g., 2.2 for the second Section in Chapter 2 and 2.3.4 for the fourth
Sub- section in third Section of Chapter 2. Use only Arabic Numerals with decimals.
Section numbering should be left justified using large bold print.

Example:

1.1 GENERAL

1.2 ADSORPTION

< Font Style Times New Roman, size 12, Bold, Upper Case>

Sub Sections - Use only Arabic Numerals with two decimals. Sub section
numbering should be left justified using bold print.

Example:

1.1.1 Adsorption Isotherms

1.1.2 Langmuir Isotherms etc

< Font Style Times New Roman, size 12, Bold, Title case>

<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
 CHAPTER 2

COMPONENTS USED

Explain all the components you have used with specification

<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
 CHAPTER 3

METHODOLOGY

Explain the methodology of your project with circuit diagram/block diagram. Also
attach step by step Picture of your project implementation process.

(Don’t copy circuit diagram from any source. Draw the circuit diagram by
your own using any software or manually and then attach in this chapter)

<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
 CHAPTER 4

RESULTS AND DISCUSSION

(Explain your final results with output picture of your project)

<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
 CHAPTER 5

CONCLUSION AND FUTURE WORK

(Explain conclusion and future work of your project)

<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
REFERENCES

(LIST THE REFRENCES OF YOUR PROJECT)

1. Ariponnammal, S. and Natarajan, S. (1994) ‘Transport Phonomena of SmSel –

X Asx’, Pramana – Journal of Physics, Vol.42, pp.421-425.

2. Barnard, R.W. and Kellogg, C. (1980) ‘Applications of Convolution Operators

to Problems in Univalent Function Theory’, Michigan Mach. J., Vol.27, pp.81–
94.

3. Shin, K.G. and Mckay, N.D. (1984) ‘Open Loop Minimum Time Control of
Mechanical Manipulations and its Applications’, Proc. Amer. Contr. Conf.,
San Diego, CA, pp. 1231-1236.

4. Abramowitz, M. and I. A. Stegun, I.A. (Eds.,) (1964) Handbook of

Mathematical Functions (Applied Mathematics Series 55). Washington, DC:
NBS, pp. 32-33.