Download STUCOR App for all subject Notes & QP's

of of/
RegNo:|
é
| || || ||
; ct Q\idstion Paper Code : 80128
~
s al,/
°SiemTon, DEGREE EXAMINATIONS, APRIL/MAY 2019.
Third Semester
Manufacturing Engineering
EE 8353 — ELECTRICAL DRIVES AND CONTROLS
(Common,to Mechanical Engineering/Mechanical and Automation Engineering)
°
Time : Three hours
Answer ALL questions.
PART A — (10 x 2 =20 marks)
1.
List the factors affecting the selection of electric drives.
2. Mention the application of electrical drives.
3. | Why the DC series motor is never started on no-load?
4.
What is meant by regenerative braking?
5. What is the necessity of starter?
6. What are the advantages of electronic starter?
7.
(Regulation 2017)
Maximum : 100 marks
| AA
List the different methods of speed control of DC series motor.
8.
9.
What are the advantages ofWard-Leonard speed control?
Define slip power control. What is meant by slip power recovery system?
10. What is meant byv/f control?
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
PART B — (5 X 13 =65 marks)
11.
(a)
Gi)
List and Discuss the classification of electric drives.
(8)
Explain the various classes of duty. How it affects the selection of
rating of a motor for the drive?
(5)
Or
(b)
(i)
(uu)
Drawa typical temperature rise-time curve and derive equation for
temperature rise in an electric drive.
(8)
A motor has heating time constant of 45 minutes. When the motor
runs continuously on full load, its final temperature rise is 80 C
(1) What the temperature rise after 1 hour, if the motor runs
continuously on full load?
(2) Ifthe temperature rise of 1
hr rating 80 C find the maximum
steady state temperature at this rating.
12.
(a)
What is meant by braking? Explain in details.
&
Draw and explain the torque-spéed characte
DC motors.
Or
s
(b)
What are the braking methods available for induc
explain any one detail?
Draw and explain the speed-torque characteristics
induction motor.
6
13.
(a)
What are the different types ofAC motor starter?
Draw and explain rotor resistance starter with a
Or
(b)
Draw and explain a three point starter for a DC mc
Discuss the electronics stators for induction motor.
14.
(a)
With a neat circuit diagram, explain chopper fedfi = ,
drive?
6)
Explain in detail, the armature control method of speed control
with neat diagram.
(8)
Or
(b)
A 220 V DC shunt motor having a field flux of 0.8 Wh, runs at a
speed of 900 rpm. Find the speed of the motor, if the field flux
reduced to 0.6 Wh by field resistance control method.
(8)
Gi)
List out the methods of speed control in DC motors.
2
(5)
80128
STUCOR APP
3
80128
r
(5)
Or
(b)
Elaborate the working of following methods with relevant circuit
diagram:
(18)
(i) Kramer system
Gi)
Scherbius system.
PART C — (1 x 15 =15 marks)
hree phase induction motor is supplied from a 50 Hz supply and
is at 1200 rpm when the slip is 4%. Determine the synchronous
sed.
(7)
plain in detail, the rotor resistance method of speed control of a
9
ring induction motor.
Or
scuss the speed control of AC motors by using three phase
: Voltage regulators.
(8)
_, _. 30 Hz induction motor uses a pole amplitude modulation method
to control the speed. The stator has 16 poles while the pole
modulating function has 4 poles. Atwhat speeds motor can run? (7)
(8)
15.
(a)
(i)
Discuss the operation of pole changing method of speed control. (6)
Gi) Explain the V/f control method of AC drive with neat sketches.
(7)
STUCOR APP

Download STUCOR App for all subject Notes & QP's

pep Reel otot
Question Paper Code : 25086
B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2018.
Third Semester
: "
Mechanical Engineering
.
;8359-- ELECTRICAL DRIVES.AND CONTROLS
afacturing Engineering/ Mechanical and Automation Engineering)
(Regulations 2017)
3
Answer ALL questions.
PART A — (10 x 2 =20 marks)
What are themajor elements of an-electric drive?
Compare Group drive and individual drive.
Why
Maximum : 100 marks
aulPe
|
a series motor is more suited to deal with torque overloads than other
DC motors? -
oO
p
9,
10.
Draw the speed torque characteristic of (a) fan (b) constant power loads.
What are the protective devices used in DC Motor Starters?
Mention the meritsand demerits ofDOL starter.
“Mention the different methods of speed control employed for DC Series Motor.
What is meant by. time ratio control ofDC choppers?
What are the main features of V/f control? :
List the advantages and disadvantages of Static Scherbius scheme of speed control.
STUCOR APP
~j

Access 3,000+ Study Materials for Semester Exams via STUCOR App
PART B — (5 x 13 =65 marks)
11.
(a)
G)
$Aconstant speed drive has the following duty cycle :
(1) Load rising from 0 to 400 kW— 4 minutes. _
(2) Uniform load of 500 kW— 4 minutes.
(3) Remaining idle for 2 minutes.
Estimate the Power rating of the motor. “Assume Loss to be
proportional to (power)?.
~ (5)
Gi) List out the factors governing the selection ofmotors.
Or
(b)
12.
(a)
Draw the typical temperature rise-time curve and derive the equation for
temperature rise in an electric drive.
.
a
Or
«
Derive the speed-torque characteristics of a DC shi
suitable graph and equations.
Or
(b)
(i)
Obtain the torque-slip characteristics of single
motors.
Gi) Discuss any one method of electrical braking of Indu
13.
(a)
How are DC motors started? Draw and explain the fo
used for aDC shunt motor.
Or,
(b)
(i) Draw and explain the manual auto-transformer's
phase induction motor.
:
(ii) Explain with neat circuit diagram, the star-delta st
.
starting squirrel cage induction motor.
,
(6)
14.
(a)
Demonstrate the operation of a semi converter fed DC shunt motor drive
with relevant waveforms and draw the speed torque characteristics. (13)
Or
(b)
What are the factors controlling the motor speed? Discuss the various
speed control methods used for DC series motors.
(18)
ize Ward Leonard method of speed control of DC motor and list
irious features.
(15)
-
(8)
15.
(a)
(i)
(ii)
Explain the working of variable frequency control of induction
motor fed from voltage source inverter.
(8)
List various industrial applicationsof three phase induction motor.
(5)
Or
(b)
Illustrate the static scherbius method of speed control of three phase
induction motor.
;
PART C— (1 x 15 = 15 marks)
sail the rotor resistance method of speed control of a slip ring
uction motor.
.
(10)
ef the principle by which slip power can be recovered from slip
g induction motors.
(5)
(48)
2
25086
STUCOR APP
3
25086
STUCOR APP

Download STUCOR App for all subject Notes & QP's

“ha AW
|GN Question Paper Code: 90196
BEB,Tech ‘DEGREE EXAMINATIONS, NOVEMBER/DECEMBER 2019
Third Semester
Manufacturing Engineering -
EE 8353: ELECTRICAL DRIVES AND CONTROLS
(Common to Mechanical Engineering/Mechanical andAutomation Engineering)
(Regulations 2017)©
Time: Three Hours)
Answer ALL q
PART.
1. Write:
2, List th
3. Write!
4, Whati
5. List th
6. Mentic
7. Comm
usingf
8. Which
9, List tk
motor.
10. Draw
scheme
(5x138=65 Marks)
11. a) i) Demonstrate the basic elements ofan electric drive using static
elements.
ii) Explain the four quadrant operation ofa drive.
(OR)
b) Describe the two different types ofcontinuous duty for an electric motor.
(6)
(7)
(18)
: slip energy recovery
on in DC series motor ?
in 3 phase induction
_ Mavimum: 100 Marks —
=20 Marks)
ately excited DC motor
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
TI
w7vLovVu
f°af
12. a) Compare the mechanical and electrical braking of anelectric motor.
(OR)
Se
Discuss in detail about characteristics of series and shunt motors.
18. a)
b)
(13)
Discuss the stator mechanism for controlling the speed of induction motors. (13)
(OR)
A 3-phase squirrel cage induction motor has a starting current eight times
the full load value. The full load slipis 4%. Compute the starting torque as a
percentage of full load torque if the motoris started (a) direct on line (b) by
star/delta starter (c) using anauto transformer to limit the starting current to
three times the full load value. Wh:
‘entage of
full load value.
14. a)
Compare armature resistance and ar
series motor in details.
b)
15. a)
b)
e.
4
schemes with its suitable
|
atrol ofDC
(13)
(13)
(13)
(13)
(13)
(13)
(1X15=15 Marks)
16. a)
'C after 1 hour and 60°C|
ne approximately its final
1utes working, 8 minutes
ron losses.
(15)
b)
be taken as 1 Q.
‘es a load whose torque is
pivpysuvial vw uus Syuare UL Ue speed. wen running at 900 rpm ittakes an
armature current of45A. Find the speed atwhich the motor runs ifaresistance
of 8
Qis connectedin series with the armature. The armature resistance may
Oye ee
(15)
STUCOR APP

Download STUCOR App for all subject Notes & QP's

Reg. No.: |
|
|
Question Paper Code: 71767 10s |edoiz al
B.E/B.Tech: DEGREE. EXAMINATION, APRIL/MAY 2017.
Third Semester
Mechanical Engineering
'851 — ELECTRICAL DRIVES AND CONTROLS
Manufacturing Engineering/Mechanical andAutomation
‘trochemical Engineering/Production Engineering/ Chemical
3/Petrochemical Technology, Petrochemical Engineering)
(Regulations 2018)
Maximum : 100 marks
Answer ALL questions.
PART A — (10 x 2 =20 marks)
What are the factors that influence the choice ofelectric drives?.
Define heating time constant and cooling time constant.
List the types of single phase induction motor.
Draw the mechanical characteristics of shunt and series motor.
What is the necessity of starter for AC motors?
What are the protective devices in a DC motor Starter?
Why chopper based de drives give better performance than rectifier controlled:
drives?
List the limitations of field control method:
10.
‘What are the advantages of slippower recovery schéme of controlling the speed
ofinduction motor?
What is meant by V/f control?
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
PART B— (5 x 13 =65 marks)
11.
(a)
Draw and explain how to classify the drives according to their duty cycle
and give examples.
16. (a)
:
_
Or
(b)
(i) The enclosure of a 10 kW motor is equivalent to a cylinder of 70cm
diameter and 100 cmlength. The motor weighs 500 kg assuming
that specific heat is 700 J/kg/°C and that the peripheral surface of
the enclosure of the motor alone is capable of heat dissipation of
12.5 W/m?/°C, Calculate the heating time constant of the motor and
its final temperature risé. Assume the efficiency of the motor as
90%
.
(5)
Gi) Show that for an electric motor, the relationship between
temperature rise and time is an exponential function.
* (8)
(a)
Explain the torque slip and speed torque characteristics of.
induction motor.
:
Or |
(b)
13.
(a)
What are the different electrical braking methods used 1
drives? Explain the methods applied to de shunt motor. :
With neat diagram, explain any three types ofAC starters.
Or
(b)
14.
(a)
What is the necessity of DC starters? Explain with neat $]
principle of operation of 3 point starter.
a
G)
Explain the Ward-Leonard system for speed control o
State the advantages and disadvantages of the system.
Gi) Explain the Flux control method of speed control fi
motor,
Or
(b)
Describe theworking of step down de chopper, with the hel
circuit diagram and waveforms. State the relation between output and
input voltages. How the speed of a demotor is controlled using a step
*down chopper?
* (18)
15. * (a)
Explain with neat sketch the conventional Kramer and Scherbius method
of variable speed drive system used for slip power recovery scheme. (13)
Or
(b)
Discuss the salient aspects of speed control scheme for ac voltage’
controller fed three phase induction motor.
. (18)
3
2
= =
WA1167
ll
71767
(b)
(13)
PART C — (1 x 15 =15 marks)
A starter required for a 220 V. shunt motor. The maximum allowable
current is 55 A and the minimum current is about 35 A. Find the number
of starter resistance required and the resistance of each section.
The armature resistance ofthe motor is 0.4 ohm.
(15)
Or
Explain the different types of braking ofthree phase induction motors.
STUCOR APP

Download STUCOR App for all subject Notes & QP's

|
Reg.No.:|
Question Paper Code :
| | | | | | | | | | IJ
orob/ti
40994
B.E-/B.Tech. DEGREE EXAMINATION, APRIL/MAY 2018
Third Semester
Mechanical Engineering
EE 6351 — ELECTRICAL DRIVES AND CONTROLS
(Common toManufacturing Engineering/Mechanical and Automation Engineering/
Petrochemical Engineering/Productio
gineering/
Petrochemice
(Regulati
Time :Three Hours
um: 100 Marks
)x2=20 Marks)
1. Def
An
s
4. Hor
31 cage induction motor ?
5. Wh
6. WE
7. Gn
oa,
8. What are the advantages of series motor?
9. Rotor resistance control technique cann’t be used for cage 1
10. Compare 120° and 180° inverter mode.
Sy:
e operation?
motor starter ?
M —
Justify.
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
I)
40994
PART —B
(5x13=65 Marks)
11. a) i) Whatare all the factors influencing the choice ofelectrical drives ?
ii) Explain about the Classes ofMotor Duty with a neat diagram.
(OR)
12.
b) Derive the heating and cooling curves.
a) i) Explainthe characteristics ofdc shunt motors with a neat diagram.
ii) Write the types of electric bral
(OR)
b) Explain various electric braking
characteristics during braking op
13. eo
I
14.
a
,
motor and its
ie
merits and
(7)
wwvew-. ------. —-1d its different
ird control system with neat
I
es.
15. g
ytor.
I
PART —C
control speed from rotor side ?
(1x15=15 Marks)
16.
a) Explain the closed loop speed control ofDC motor inabove and below the rated
speed with the block diagram.
(OR)
b) Explain the 4point starter with diagram. Compare 3 point and 4point
starter.
éfo
(15)
(15)
(5)
(8)
(6)
(6)
(7)
(6)
(7)
STUCOR APP

Download STUCOR App for all subject Notes & QP's

~~
res.No.:( 111111111111
ola Question Paper Code : 52948
J / of
el
J
<8.
Tech.DEGREE EXAMINATIONS, APRIL/MAY 2019.
Third Semester
Mechanical Engineering
6351 — ELECTRICAL DRIVES AND CONTROLS
(Regulation 2013)
facturing Engineering, Mechanical and Automation Engineering,
Engineering, Production Engineering, Chemical.Engineering,
Petrochemical Technology) -
3
Answer ALL questions.
PART A — (10 x 2 =20 marks)
10.
What is an electrical drive?
Define the term ‘short time duty’.
Draw speed-torque characteristics of a traction load.
What is meant by ‘braking of electrical motor’ ?
What is the necessity of starter for AC motors?
What are the protective devices in a DC motor Starter?
Give the Limitation of field control.
List the main applications ofWard-Leonard system:
Name the various speed control methods used in AC motors?
Write the different types of slip power recovery scheme.
Maximium : 100 marks
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
PART B — (5 x 18 =65 marks)
16.
11.
(a)
Draw and explain how to classify the drives according to their duty and
give examples.
(13)
Or
(b)
Gi)
The enclosure of a 10 kW motor is equivalent to'a cylinder of 70 cm
diameter and 100°cm length. The motor weighs 500 kg assuming
that specific heat is 700 J/kg/°C and that the peripheral surface of
the enclosure of the motor alone is capable of heat dissipation of
12.5 W/m?/°C. Calculate- the heating time constant of the motor
and its final temperature rise. Assume the efficiency of the motor as
90%.
(5)
(ii) Show that for an electric motor, the relationship between
temperature rise and time is an exponential function.
(8)
12.
(a)
Explain the four quadrant operation in motor drives wit
-
Or
(b)
(i)
Discuss the dynamic braking of DG shunt motor.
(ii) Describe the speed-torque characteristics of D(
series motor with neat sketch.
13.
(a)
Explain typical.control circuits in starter for DC shu
motors.
;
Or
(b)
Explain typical control circuits in starters for the thre
induction motors.
14.
(a)
)
Describe with a help of a neat circuit
Ward-Leonard control ofD.C. motors.
Gi) Explain the working of rectifier fed DC shunt mot
Or
15,"
(b)
(a)
Explain the speed control of D.C. shunt motors using D.C. choppers. (18)
Explain the pole changing, stator frequency variation methods for
controlling the speed ofAC motor.
;
Or
(b)
Explain the slip power recovery control of slip ring induction motor. (13)
2
(18)
(a)
%
PART C — (1 x 15 =15 marks)
A 220 V DC shunt motor takes 22 A at rated voltage and runs at 1000
rpm. Its field resistance is 100 chms and armature circuit resistance is
0.1 ohms. Compute the value of additional resistance required in the’
armature circuit to reduce the speed to 800 rpm when the load torque is
proportional.to speed.
(15) -
Or
(b)
A motor has a thermal time constant of 45 minutes. When the motor runs
continuously on full load,its final temperature rise is 80° C
hat is the temperature rise after 1 hour if the motor runs
ntinuously on full load?
the temperature on one hour rating is 80° C, find the maximum
eady state temperature at this rating?
,
52948
3
STUCOR APP
52948
STUCOR APP

Download STUCOR App for all subject Notes & QP's

Reg. No.:
Question Paper Code :
80369
B.E:/B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2016.
Third Semester
Mechanical Engineering
—- ELECTRICAL DRIVES AND CONTROLS
cal and Automation Engineering, ProductionFE
Engineering,
ring, Petrochemical Engineering, Chemical Engineering and
- Petrochemical Technology)
: iReetiatone 2013)
|
Answer ALL questions.
PART A— (10 x$=20 marks)
jyatis an Blectrienltanive?
fine the term ‘short time rating’,
iat are the various components ofload torque? :
iat do you understand by electric braking?
iy de motors should notbe started without starters?,
iat type of. protection is provided ; in the starters used for 3 phase induction
motor?
List the various methods of conventional and solid state epeed control of D.C.
motors.
.
Compare armature control and field
See
Why the V/f.is kept constant while controlling the speed of a 8 phase
induction motor?
10.
Mention the advantages of squirrel cage induction motor over a D.C. motor..
:
Maximum : 100marks
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
PART B— (5.x 13 =65 marks)
11,
(a)
Gj)
What are the various factors which decide the choice of an
electronic drive for industrial applications?
(6)
(ii) Discuss different classes. of duty cycles.
Or
Or .
(b)
Draw the pattern of temperature rise characteristic under steady state
for
‘G)
~Short time duty
(ii) Intermittent dutyand explain the equivalent current’ method of
estimating motor rating.
,
12.
(13)
(a)
Describe various methods of braking used .for shunt, series and eamnannd
motors.
Or
(b) .. G)
For drives, classify the types of load torques available a:
few speed torque curves of typical leads.
(ii) Explain the four quadrant operation of a motor driving a h
13.
(a)
Discuss, with circuit diagrams, the star delta starter ;
transformer starter on the basis of starting torque and starting
Or
(b)
14.
(a)
Describe with suitable diagrams the function of (i) 2 point st,
(i1) 3 point starter.
Describe with a help of a neat circuit diagram explain Warc
control of D.C. motors.
Or |
*
:
(b)
(a)
Explain the speed control ofD.C. shunt.motors-using D.C. choppers. (13)
Describe the variable voltage variable frequéncy method of speed control
of 3 phase induction motors for full range of speed control.
I
_ Or
(b)
Explain slip power recovery scheme with neat diagram:
2
,
(138)
80369
(13)
(b)
A motor hasa thermal time constant of45 minutes. When the motor runs
continuously on full load, its final temperature rise is 80° C (i) what is
iture rise after 1 hour if themotor runs continuously on full
’ the temperature on one hour rating is 80° C, find the
teady state temperature at this rating?
a
(7)
16,
(a).
PART C — (1 x 15 =15 marks)
A 220 V de shunt motor takes 22 A ‘at rated voltage and runs at
1000 rpm. Its: field resistance: is 100 ohms and armature circuit
resistance is 0.1 ohms. Compute the value of additional resistance
required in the armature circuit to reduce the speed to 800 rpm when the
load torque is proportional to speed.
LE
(15)
3
80369
STUCOR APP

Download STUCOR App for all subject Notes & QP's~\\

Reg. No.: |
(A 1 A
|
Question Paper Code :
50476
B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2017
Third Semester
Mechanical Engineering
KE 6351 — ELECTRICAL DRIVES ANDCONTROLS
(Common to :Manufacturing Engin
Engineering/Petrochemical Engineer
Engineering/Petrocl
(Regulati
Time :Three Honre
um : 100 Marks
omation
‘Chemical
'x2=20 Marks)
1. List
2. Dray
3. Why
4. Defi
5. State
6. Dray
agram.
or?
ring induction motor.
7. Whav are vuc tvuL YUaULaLL UL UU Arrives £
8. Why self-commutated devices are preferred over thyristors for chopper circuits ?
9. Write anote on slip power recovery scheme.
10. List out the drawbacks ofrectifier fed DC drives.
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
BA
50476
PART -—B
11.
Explain any four classes ofduty for an electric motor.
(OR)
(6x13=65 Marks)
(13)
Explain different types of electric drives and the factors affecting the selection
ofdrives.
(13)
12.
Explain in detail about any two methods ofelectrical braking in DC machines. (13)
(OR)
13.
b)
a)
Discuss in detail about characteristic
Explain with neat sketch ofworking|
disadvantages.
b)
14. |
]
]
1
]
15.
]
]
16.
]
]
juadrant chopper fed
(15)
b)
Explain the speed control ofDC series motors using controlled rectifiers. Also
draw the transfer characteristics.
1d with neat sketch.
se induction motor.
‘and its
(13)
ITS.
ture control
(13)
(13)
(13)
(13)
(1x15=15 Marks)
(13)
(13)
(15)
“%
age
STUCOR APP

Download STUCOR App for all subject Notes & QP's

23/ Ut/ IP
mee
Ito
Question Paper Code : 20450
B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2018.
‘Third Semester
|
Mechanical Engineering
6351 — ELECTRICAL DRIVES AND CONTROLS
ufacturing Engineering, Mechanical and Automation Engineering,
. Engineering, Production Engineering, Chemical Engineering,
Petrochemical Technology)
(Regulations 2013) |
8
AnswerALL questions. |”
PART A—(10 x 2=20 marks)
What is an electrical drive?
Define cooling time constant.
What are the three regions in the speed torque characteristics (for (0<s<1),
(s <0), 1<s<2)) ofan induction motor?
:
10.
List some application of D.C. Loris motor.
What is the necessity of a starter?
What are the disadvantages of a three point starter?
Define time-ratio control in a D.C. chopper circuit.
What are the disadvantages ofa field control method?
What is meant by V/F control?
What is meant by Slip-Power recovery system?
Maximum : 100 marks
Ce)
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
PART B — (5 x 13 =65 marks)
LL.
(a)
Explain heating and cooling curves of a motor and obtain the expression
for maximum temperature attained.
14.
(a)
(13)
Or
Or
.
(b)
(i) At fullload of 10 H.P., the temperature rise of,a motor is 30°C after
one hour and 40°C after two hours. Calculate (1) The final
temperature rise on full load, (2) Heating time constant of motor.:
(8)
Gi)
12.
(a)
(i)
Gi)
Tabulate the merits and demerits of ac and de drives.
_.
(5)
Or
Draw and explain the speed-torque characteristicsof different types
of load. with graph.
;
A 3-Phase, 50 Hz, 8 pole induction motor has a f
The rotor resistance is 0.001 2 / phase and star
0.005 Q / phase. Find the ratio-of maximum to fi
the speed at which the maximum torque occurs.
Or
(b)
A 12 pole 50 Hz, 3 phase induction motor has -
0.15 2 and standstill reactance of 0.25 Q per phé
is running at a speed of 480 r.p.m. The rotor :
phase at standstill is observed to be 32 V: Cal
torque, (2) full load torque, (3) maximum toi
maximum torque.
|
_s
Gi)
13.
(a)
@).
(ii)
Describe how aD@ motor is brought to'stop by dy
Examine the operation of four point starter with <
Find the percentage tapping required on an auto-transformer
required
fora squirrel-cage motor to start the motor against 1/4 of
full load torque. The short-circuit current on normal/voltage 1s
4 times the full-load current and the full-load slip is 3%.
(5)
Or
(b)
Explain the different types of starters used in cage induction motor with
a neat sketch.
;
2
»(13)
20450
STUCOR APP .
3
20450
(b)
(6)
n the static Kramer and Scherbius drive for the speed control of an
ion motor.
— (18)
PART C — (1 x 15 =15 marks)
‘
.a schematic circuit diagram of a direct on lihe starter for a three
induction motor and explain its working, also explain how the
protection against over load works. .-
Or
Explain with a neat diagram, the solid state speed control of A.C. drives.
(15)
;
» (15)
4a foal
(b)
With the neat circuit diagram, explain chopper fed four quadrant DC
drives.
(18)
WIT 1.
isimple block diagram explain the operation of a variable voltage
le frequency (VVVF) inverter fed 39 induction motor drive.
(18)
Gi)
With a neat diagram, explain the working of Ward-Leonard speed
control ofDC motor.
(7)
With a neat diagram, explain the speedcontrol using flux control in
a DC motor.
oo
(6)
STUCOR APP

Download STUCOR App for all subject Notes & QP's

ELI
HMA i
Reg. No.:
/ | | |
<3PsQuestion Paper Code: 91483
ees
‘
re
Q gee v
B.B.B.fecha bk
i ~ : te war 5 \
/PEGREE EXAMINATIONS, NOVEMBER/DECEMBER 2019
\ ee
Se
* ONG
See
Third Semester
Mechanical Engineering
- BE 6351 — ELECTRICAL DRIVES AND CONTROLS
_ (Common to Manufacturing Engineering, Mechanical and Automation
Engineering Petrochemical Engineering, Production Engineering, Chemical
Engineering, Petroch
OO
(Regulatio
‘Time : Three Hours |
yn: 100 Marks
EE aS
tt
:2=20 Marks)
1. Drav
2. Men
3. Why
drives.
tor ?
6. Stat
~ mote
e and slip-ring induction
7. Why
driv
. than rectifier controlled
8. List the limitations of field control method of UU motor.
9. Why the Vif is kept constant while controlling the speed of a 3 phase induction
motor ?
10. Mention the advantages of squirrel cage induction motor over a D.C. motor..
STUCOR APP

Access 3,000+ Study Materials for Semester Exams via STUCOR App
|
91483
PART-B _
|
A ACc
(5x13=65 Marks) |
11. a) i) Whatis an electrical drive system ? Howare electric drive classified?
List its advantage and disadvantages.
ii) Explain Heating and Cooling curves ofan electric drive.
a
|
b) What are the factors that influence the choice of electrical drives ?
12.
a) i) Draw and explain the Speed- Torque characteristics ofDC shunt, series
and compound motors with necessary equations.
.
un) Drawand explain the Speed-Torque characteristics of three phase
induction motor.
!
(OR)
b) What are the different methods used fc
all the methods with neat diagrams. Al
which electrical motor.
13. a) Ex
| det
b) Br
14; a) i)
ii)
b) De
dia
Ho
15. a) De
3p
b) Ex
16.
ations in
? Explain
table for —
a
(8)
a
_ (3)
.
(8)
(5).
itor.
Lot DU motors. State
xDC shunt motor.
1e help of suitable circuit
put and input voltages.
?
jJown chopper
10d ofspeed control of
ol.
n.
a (1X15=15 Marks) |
a) A starter required for a 220V shunt motor. The maximum allowable current
is 55 A and the minimum current is about 35 A. Find the number of starter —
resistance required and the resistance ofeach section. The armature resistance
of the motor is 0.4 ohm.
(OR)
b) Explain the different types ofbraking of three phase induction motors.
gy
(5)
.
STUCOR APP