s

SRT 1C
Synchronous Radio
forTrunk Applications
23 Technical data
Transceiver
Frequency range (GHz):
• 28/29.65 MHz bands 3.4-3.9 (OIRT standard)
3.6-4.2 (ITU-R F.382-6 and F.635 CC only)
4.4-5.0 (ITU-R F.746)
5.6-6.1 (OIRT standard)
5.9-6.4 (ITU-R F.383-5)
7.1-7.7 (ITU-R F.385-5)
7.7-8.2 (ITU-R F.386-4)
7.9-8.4 (OIRT standard)
8.2-8.5 (ITU-R F.386-4)
12.7-13.3 (ITU-R F.497-4)
• 40 MHz bands 3.6-4.2 (ITU-R F.635-2)
4.4-5.0 (ITU-R F.1099)
6.4-7.1 (ITU-R F.384-5)
10.7-11.7 (ITU-R F.387-6)
• Bold Bands are covered also with the co-channel version
TX output power (*) 4L - 4 - 5 - 6LL - 6L - 6U GHz +29 dBm
5 GHz/64 TCM +28.5 dBm
7 GHz +27.5 dBm
8 - 8U GHz +27 dBm
11 - 13 GHz +26.5 dBm
Frequency stability ±30 ppm
IF Frequency 70 MHz
IF Frequency level -5 dBm
10 BER Threshold (**)
-3
4L - 4 - 5 GHz/128 TCM -73.5 dBm
4 GHz / 64 TCM -75.5 dBm
5 GHz / 64 TCM -75 dBm
6LL - 6L GHz -73 dBm
6U GHz -76 dBm
7-8-8U GHz -72.0 dBm
11 GHz -74.5 dBm
13 GHz -72 dBm
Branching losses vs. configuration (***)
• 1+1 1.5 dB
• 3+1 2.5 dB
(*) Including branching filter losses; +3dB if High Power Amplifier is adopted (available for 128 TCM systems).
(**) Including RF channel branching filter losses. In case of co-channel operation 0.5 dB of degradation shall be taken into account.
(***) Values referred to 6 GHz band.

Modemodulator
Modulation 128/64-4D "Full Digital" Trellis Coded Modulation
with associated soft Viterbi decoding
Symbol rate 128 TCM: 23.929 Mbit/s
64 TCM: 28.276 Mbit/s
Information Bit/Symbol 6.5 (128 TCM-4D)
5.5 (64 TCM-4D)
24

Roll-off 0.215 (128 TCM-CC)

0.35 (64 TCM-CC)
0.35 (128 TCM-AP)
0.5 (64 TCM-AP)

Baseband equalization 11 taps ATDE (AP)

11 taps XPIC and 11 taps ATDE (CC)

Baseband & Protection Switching

Baseband interfaces STM-1 electrical (ITU-T Rec. G.703)
STM-1 optical short-haul (ITU-T Rec. G.957 S.1-1)

Digital service and

auxiliary capacities (*) Section Overhead Processing:
2x64 kbit/s (express or omnibus order-wire)
576 kbit/s (data communication channels DCCM)
192 kbit/s (data communication channels DCCR)
1x64 kbit/s for SCS (Switching Control Signal)
1x64 kbit/s for ATPC and FAST BER
Nx64 kbit/s (free bytes of MSOH and RSOH accessed by SOH cards)

A way-side traffic of 2 Mbit/s card can be optionally provided by using the not yet standardised bytes of SOH matrix.
(*) Subject to change according to the final ETSI/ITU-T/ITU-R decision

Maximum protected configuration 7+1 twin path

Switch type Hitless "Error Free"
Switching Control Signal (SCS) 64 kbit/s on dedicated SOH byte
Switching criteria *No data
*Loss of Frame
*FAST BER ("Early Warning"):four thresholds (10-6, 10-8, 10-10, 10-12)
from the Viterbi decoder
*BER = 10-3 (from parity bits)

Operating Time 5 ms
Additional facilities DADE, Dynamic phase difference automatic recovery

Power Consumption (from battery):

Transceiver+Modemodulator 110 W
Space diversity receiver 12 W
1xSTM-1 BB tributary interfaces 9 W

Environmental Conditions
The equipment complies with ETSI Recommendation ETS 300-019 referring to the following classes:
Operation and exceptional conditions Class 3.1E
Transport Class 2.3
Storage Class 1.3

Electromagnetic Compatibility
The equipment complies with ETSI ETS 300-385.

Mechanical Practice
The equipment complies with ETSI ETS 300-119.