Scribd
Upload
9 views3 pages

AVR523

Uploaded by

Vishnu s kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views3 pages

AVR523

Uploaded by

Vishnu s kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

AVR523: Migration from ATmega8 to ATmega8A

8-bit
Microcontrollers
1 Introduction
In order to optimize the manufacturing process and to further reduce current Application Note
consumption, an optimized version of ATmega8 has been introduced.
The ATmega8A is a functionally identical, drop-in replacement for the ATmega8.
All devices are subject to the same qualification process and same set of
production tests, but as the manufacturing process is not the same some electrical
characteristics differ.
ATmega8 and ATmega8A have separate datasheets. This application note outlines
the differences between the two devices and the datasheets. There is also a
detailed change log to assist the user at the end of the ATmega8A datasheet.
Remember to always use the latest revision of the device datasheet.
Minor differences in typical characteristics are not discussed in this document as
long as the low and high limits remain the same. For detailed information about the
typical characteristics, see sections “Electrical Characteristics” and “Typical
Characteristics” of the device datasheets.

Note: This application note serves as a guide to ease migration. For complete
device details, always refer to the most recent version of the ATmega8A
datasheet.

Rev. 8164A-AVR-05/09
2 Changes in Characteristics
This section outlines major differences in characteristics that may have an effect on
the application in which the device is used. For detailed information, refer to the most
recent version of the device datasheets.

2.1 Current Consumption


Active and Idle mode current consumption of the device has been reduced
significantly. The tables below present typical current consumption figures at room
temperature. All values are taken from device datasheets, unless otherwise noted.
Table 2-1. Typical Current Consumption of Device at Room Temperature
Mode Condition ATmega8 ATmega8A Change
VCC=3V, f=4 MHz 3 mA 2mA - 33%
Active
VCC=5V , f=8 MHz 11 mA 6 mA - 45%
VCC=3V, f=4 MHz 1 mA 0.5 mA - 50%
Idle
VCC=5V , f=8 MHz 4.5 mA 2.2 mA - 51%

2.2 VOL Levels


In Table 2-2 are listed differences in output voltage levels.
Table 2-2. Changes to VOL and VOH Levels
ATmega8 ATmega8A
Symbol Parameter Condition Units
Min Max Min Max
Output Low Voltage IOL=20mA, VCC=5V - 0.7 - 0.9 V
VOL (Ports A - G)
IOL=10mA, VCC=3V - 0.5 - 0.6 V

2.3 Voltage Reference Levels


In Table 2-3 are listed differences in reference voltage levels.
Table 2-3. Changes to Internal Voltage Reference Levels
ATmega8 ATmega8A
Symbol Parameter Unit
Min Typ Max Min Typ Max
Internal Voltage
VINT 2.3 2.56 2.7 2.3 2.56 2.8 V
Reference

3 Datasheet Changes
For a summary of changes, see the revision history at the end of the ATmega8A
datasheet.

2 AVR523
8164A-AVR-05/09
Disclaimer
Headquarters International
Atmel Corporation Atmel Asia Atmel Europe Atmel Japan
2325 Orchard Parkway Unit 1-5 & 16, 19/F Le Krebs 9F, Tonetsu Shinkawa Bldg.
San Jose, CA 95131 BEA Tower, Millennium City 5 8, Rue Jean-Pierre Timbaud 1-24-8 Shinkawa
USA 418 Kwun Tong Road BP 309 Chuo-ku, Tokyo 104-0033
Tel: 1(408) 441-0311 Kwun Tong, Kowloon 78054 Saint-Quentin-en- Japan
Fax: 1(408) 487-2600 Hong Kong Yvelines Cedex Tel: (81) 3-3523-3551
Tel: (852) 2245-6100 France Fax: (81) 3-3523-7581
Fax: (852) 2722-1369 Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11

Product Contact

Web Site Technical Support Sales Contact


www.atmel.com [email protected] www.atmel.com/contacts

Literature Request
www.atmel.com/literature

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND
CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED
OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the
contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any
commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in,
automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

© 2009 Atmel Corporation. All rights reserved. Atmel®, Atmel logo and combinations thereof, AVR® and others, are the registered
trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

8164A-AVR-05/09

You might also like