Scribd
Upload
30 views

Lab 1 Answer

Uploaded by

انور الحاج
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Lab 1 Answer

Uploaded by

انور الحاج
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

lOMoARcPSD|41323615

1.5.7 Packet Tracer - Network Representation - ITExam


Answers.net
Network Communications (Ivy Tech Community College of Indiana)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university


Downloaded by Anwar Alhajj ([email protected])
lOMoARcPSD|41323615

1.5.7 Packet Tracer - Network Representation (Instructor Version)


Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only.
All clients have full connectivity to the servers. For the sake of frame diversity, the environment is not
entirely realistic. For instance:
 NAT and PAT overload are both used on the Branch network, but the Central 10.X.X.X network is
shared publicly.
 There is a separate DNS server in the 172 network because the computers cannot use the filer
server’s public address. The simulated DNS server, unlike BIND, is basic and does not forward
requests that it does not know to a root server. Therefore, the A records are duplicated.
 EIGRP is running in the cloud, instead of BGP.
 The Branch switch is providing DHCP, just because it can. It makes that side of the simulation
different than the Central side.
 The cloud includes two servers. One server uses the correct IP (netacad.com). The other server
uses the correct IP of Google's DNS.
 The router passwords are "cisco" and "class", but there is a "banner motd" and "banner login"
which readily provide the passwords.
 The S1 and S2 switches have spanning tree PVST enabled. Each has a different blocking port, so
all connections are green.

Objectives
The network model in this activity incorporates many of the technologies that you will master in your CCNA
studies. It represents a simplified version of how a small to medium-sized business network might look. Feel
free to explore the network on your own. When you are ready, proceed through the following steps and
answer the questions.
Note: It is not important that you understand everything you see and do in this activity. Feel free to explore
the network on your own. If you wish to proceed more systematically, follow the steps below. Answer the
questions to the best of your ability.

Instructions

Step 1: Identify common components of a network as represented in Packet


Tracer.
The icon toolbar at the bottom left hand corner has various categories of networking components. You should
see categories that correspond to intermediary devices, end devices, and media. The Connections category
(with the lightning bolt icon) represents the networking media supported by Packet Tracer. There is also an
End Devices category and two categories specific to Packet Tracer: Custom Made Devices and Multiuser
Connection.
Questions:

List the intermediary device categories.


Type your answers here.
Routers, Switches, Hubs, Wireless Devices, and WAN Emulation
Without entering into the internet cloud or intranet cloud, how many icons in the topology represent endpoint
devices (only one connection leading to them)?
Type your answers here.

 2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 3 www.netacad.com

Downloaded by Anwar Alhajj ([email protected])


lOMoARcPSD|41323615

Packet Tracer - Network Representation

15
Without counting the two clouds, how many icons in the topology represent intermediary devices (multiple
connections leading to them)?
Type your answers here.
11
How many end devices are not desktop computers?
Type your answers here.
8
How many different types of media connections are used in this network topology?
Type your answers here.
4

Step 2: Explain the purpose of the devices.


Questions:

a. In Packet Tracer, only the Server-PT device can act as a server. Desktop or Laptop PCs cannot act as a
server. Based on your studies so far, explain the client-server model.
Type your answers here.
In modern networks, a host can act as a client, a server, or both. Software installed on the host
determines the role it plays on the network. Servers are hosts that have software installed that
enables them to provide information and services, like email or web pages, to other hosts on the
network. Clients are hosts that have software installed that enables them to request and display
the information obtained from the server. A client could also be configured as a server simply by
installing server software.
b. List at least two functions of intermediary devices.
Type your answers here.
Regenerate and retransmit data signals; maintain information about what pathways exist through
the network and internetwork; notify other devices of errors and communication failures; Direct
data along alternate pathways when there is a link failure; Classify and direct messages according
to QoS priorities; Permit or deny the flow of data, based on security settings.
c. List at least two criteria for choosing a network media type.
Type your answers here.
The distance the media can successfully carry a signal. The environment in which the media is to
be installed. The amount of data and the speed at which it must be transmitted. The cost of the
media and installation.

Step 3: Compare and contrast LANs and WANs.


Questions:

a. Explain the difference between a LAN and a WAN. Give examples of each.
Type your answers here.
LANs provide access to end users in a small geographical area. A home office or school campus
are examples of LANs. WANs provide access to users in a wide geographical area over long
distances spanning a few miles to thousands of miles. A Metropolitan Area Network and the
Internet are examples of WANs. A company’s intranet may also connect multiple remote sites
using a WAN.
b. In the Packet Tracer network, how many WANs do you see?

 2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 3 www.netacad.com

Downloaded by Anwar Alhajj ([email protected])


lOMoARcPSD|41323615

Packet Tracer - Network Representation

Type your answers here.


There are two: the internet and the intranet WANs.
c. How many LANs do you see?
Type your answers here.
There are three, easily identifiable because each has a border and label.
d. The internet in this Packet Tracer network is overly simplified and does not represent the structure and
form of the real internet. Briefly describe the internet.
Type your answers here.
The internet is mostly used when we need to communicate with a resource on another network.
The internet is a global mesh of interconnected networks (internetworks).
e. What are some of the common ways a home user connects to the internet?
Type your answers here.
Cable, DSL, dial-up, cellular, and satellite.
f. What are some common methods that businesses use to connect to the internet in your area?
Type your answers here.
Dedicated leased line, Metro-E, DSL, Cable, Satellite

Challenge Question
Now that you have had an opportunity to explore the network represented in this Packet Tracer activity, you
may have picked up a few skills that you would like to try out. Or maybe you would like the opportunity to
explore this network in more detail. Realizing that most of what you see and experience in Packet Tracer is
currently beyond your skill level, here are some challenges you might want to attempt. Do not worry if you
cannot do them all. You will be a Packet Tracer master user and network designer soon enough.
 Add an end device to the topology and connect it to one of the LANs with a media connection. What else
does this device need to send data to other end users? Can you provide the information? Is there a way
to verify that you correctly connected the device?
 Add a new intermediary device to one of the networks and connect it to one of the LANs or WANs with a
media connection. What else does this device need to serve as an intermediary to other devices in the
network?
 Open a new instance of Packet Tracer. Create a new network with at least two LANs connected by a
WAN. Connect all the devices. Investigate the original Packet Tracer activity to see what else you might
need to do to make your new network functional. Record your thoughts and save your Packet Tracer file.
You may want to revisit your network later after you have mastered a few more skills.
End of Document

 2013 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 3 www.netacad.com

Downloaded by Anwar Alhajj ([email protected])

You might also like