Scribd
Upload
38 views2 pages

Maven 65 TechSpec

This document provides specifications for the Maven 65 sweeper including its dimensions, weight capacities, sweeping equipment, capabilities, drivetrain system, hydraulic system, water system, pneumatic system, brushes, hopper, and optional equipment. It includes detailed technical information and measurements for the various components and performance specifications of the sweeper.

Uploaded by

77ztf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views2 pages

Maven 65 TechSpec

This document provides specifications for the Maven 65 sweeper including its dimensions, weight capacities, sweeping equipment, capabilities, drivetrain system, hydraulic system, water system, pneumatic system, brushes, hopper, and optional equipment. It includes detailed technical information and measurements for the various components and performance specifications of the sweeper.

Uploaded by

77ztf
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MAVEN 65

DIMENSIONS, WEIGHT, CAPACITIES

All dimensions are in mm

Dimensions representative and may vary according to chassis type selected

GENERAL DATA SWEEPING EQUIPMENT


Chassis Requirement 12-18 Tonne GVW Side Brush Diameter 650mm

Wheelbase 3260mm-3900mm Widesweep Brush Diameter 400mm

Overall Length* 6100mm Side Brush Speed 0-125rpm Fully Variable

Overall Height* 3100mm Widesweep Brush Speed 0-125rpm Fully Variable

Discharge Height 1000mm Side Brush Life Expectancy 80 Working Hours

Discharge Angle 55 degrees Widesweep Life Expectancy 150 Working Hours

Door Opening Angle 90 degrees Suction Tube Diameter 250mm

Filter Mesh Type Perforated Stainless Steel Nozzle Width 720mm

Low Pressure Pump Output 26 Ipm / 3 Bar

Hydraulic Suction Filtration 125 Micron CAPABILITIES


Hydraulic Return Filtration 20 Micron Hopper Voided Volume** 6.5m3

Fan Pump Displacement 60cc / rev Hopper Payload Volume** 5.8m3

Gear Pump(s) Displacement 23cc / rev Actual Payload Capacity* 4500 - 9500kg

Suction Fan Capacity 7065 ft3/min / 200m3/min Fuel Tank Chassis* 200 litres

Suction Fan Diameter 745mm Water Tank* 1250 - 1900 litres

Sweeping Speed 0-20 mph / 0-32 kph Hydraulic Tank 80 litres

* Dependent on chassis selection


** All Scarab Hopper Capacities are measured in accordance with
European Standard EN15429

www.scarab-sweepers.com
TECHNICAL SPECIFICATION Scarab Sweepers Ltd,
Pattenden Lane, Marden,

MAVEN 65
Kent. TN12 9QD
Tel: +44 (0)1622 831006
Fax: +44 (0)1622 832417
www.scarab-sweepers.com

TWINDRIVE SYSTEM HYDRAULIC SYSTEM Located for easy servicing in a protected


• In plated steel piping where possible compartment.
The Twindrive System utilises a Deutz
TCD 3.6 L4 HP Stage V secondary engine • 10 micron filters to ensure
driving pumps to operate all hydraulic maximum protection CAN BUS CONTROL
sweeper functions, while retaining the • Hydraulic valve block in easily- The Scarab proven CANbus system, in
conventional chassis transmission, accessible location service since 2003, offers a compact
allowing seamless transition between • 80 litre steel oil tank with 10 micron panel adjacent to the driver’s seat which
sweeping and travel modes - Sweep return filter contains all controls for operating the
speed from 1.6 mph (2.5kph) up to 15- main sweeper functions. The LCD screen
• Low oil automatic shut-off
20mph (20-32kph). displays relevant operating data and
• In-cab water level indicator
provides system diagnostics and a fault-
SUCTION FAN finding facility. The Door-pod control
WATER SYSTEM panel - for frequently used operations - is
• 745mm diameter
• Self-priming low pressure water mounted conveniently to hand.
• Fan speed variable from 2300 –
pump from dust suppression
3100rpm
• Solenoid-controlled from the CANbus
• Capacity 8300 ft3/min (235m3/min)
system
• Stainless Steel standard
WATER TANK
SUCTION NOZZLE • 1 250 litre GRP water tank with
• Robust all-steel construction access lid for cleaning
• Quick release system • Sight glass with fill level indicator
• 720mm mouth width • Hydrant connector with regulation
• 250mm diameter suction tube air break
• Adjustable wear-resistant flaps
• Low-Pressure water jets PNEUMATIC SYSTEM
• Heavy Duty rubber-tyred wheels Fitted with a pressure regulator, filter/
• Hydraulic tilt water separator pneumatic solenoid
valves to control the side brush, wide
BRUSHES sweep brush and suction nozzle.
• 650mm diameter steel-tined side
brushes. SWEEPING WIDTHS
• 400mm diameter polypropylene- Suction Nozzle only 720mm
segmented widesweep
• Fully propotional variable speed to all Suction Nozzle and Side Brush 1350mm
brushes from 0-125rpm from the cab
Suction Nozzle, Side Brush
and Widesweep 2345mm
HOPPER
Both Nozzles, Both Side
• 6.5m3 gross hopper volume,
Brushes and Widesweep 3600mm
constructed entirely of corrosion-
resistant stainless steel
• Hydraulically-operated rear door OPTIONS
with safety check valve
A comprehensive range of options
• Automatic self-deploying hopper prop are available for the Maven 65
• Dual - rear body drain including Overhead Boom, High-
• Auto-blanking flaps to suction tubes pressure water pump, Auxiliary
• Stainless Steel swing-down mesh channel brush and more.
suction filter screen Please contact the Scarab Sales
• Access for suction fan cleaning Department for more information.

You might also like