Scribd
Upload
22 views

Software Upgrade Guide v2 Eng (Webos)

This document provides instructions for upgrading the software on LG TV sets. It details checking the TV model name, downloading the correct software file from LG's website, saving it to a USB drive, inserting the USB drive into the TV, and selecting options to start the upgrade process. The instructions emphasize not removing the USB drive or power cord during the upgrade.

Uploaded by

camoen1ssss
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
22 views

Software Upgrade Guide v2 Eng (Webos)

This document provides instructions for upgrading the software on LG TV sets. It details checking the TV model name, downloading the correct software file from LG's website, saving it to a USB drive, inserting the USB drive into the TV, and selecting options to start the upgrade process. The instructions emphasize not removing the USB drive or power cord during the upgrade.

Uploaded by

camoen1ssss
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Software Upgrade Guide

◆ Notice

1. Check correctly the Full model name of TV Set.


Ex) 42LB6900-TA : The Full model name must include national code.(ex. –TA)

2. Do not unplug the TV power cord during software upgrading.

1. Method to verify the Full model name of TV Set .


Method①. Check the label on the back of the TV set.
1) Check the “Model NO.” (EX. 42LB6900-TA)

Method ②. Check the Settings.


1) Press [Settings] key of remote control. 3) Select the ”About This TV”
2) Move to the “General” 4) Check the “Model”
1 Searching the software.
① Select your country after connecting to www.lg.com. ② Move to the ”Support” and click the “Download &
Manuals”

③ Fill in the your Model name. ⑤ Click the “Software update” and you can see the
(Ex. 42LB6700(Fill Model name except “-TA”.) software file.
④ Click the “Search”.
2 Downloading the software file to the USB Memory device.
① Click to all of file to download it from the website to your PC.

② Unzip the first “….vol1” software file.


③ Insert the USB memory device into USB Port of the PC.
④ Make a folder in USB Memory device. Folder name must be “LG_DTV”.
⑤ Save the software file to “LG_DTV” folder of USB Memory device.

3 Insert the USB memory device into USB port of the TV.
Position of USB port : Side or Rear

or
4 Running the software Upgrade.
① If below message appear on TV, please select “STAY”.

② If below message will appear on TV, please select “INSTALL”

※ If there are the same or lower software version in the USB memory device
than software version in your TV, doesn’t appear message.
※ A few USB memory device may not be compatible with the TV,
in that case you use another USB device.

1) Copying the new version software file from USB Memory device to the
TV system memory.
※ Don’t remove the USB Memory device while this message is displayed.
Do not unplug the TV power cord while this message is displayed.

2) Running the software upgrade.


※ Do not unplug the TV power cord while this message is displayed.

3) Go to “MENU”, then choose “General”, then “About this TV” to see your update progress bar. If the
upgrade is completed, TV will restart automatically in 5 seconds.

You might also like