Scribd
Upload
129 views

WL559E FirmwareUpgradeInstructions

The document provides steps to upgrade the firmware of an Aztech WL559E wireless repeater. It details downloading the latest firmware from the Aztech website, connecting an Ethernet cable from a PC to the device, accessing the web user interface, selecting the firmware upgrade page, uploading the firmware file, restarting for the upgrade to complete, and checking the firmware version to confirm success.

Uploaded by

rebelo.elton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views

WL559E FirmwareUpgradeInstructions

The document provides steps to upgrade the firmware of an Aztech WL559E wireless repeater. It details downloading the latest firmware from the Aztech website, connecting an Ethernet cable from a PC to the device, accessing the web user interface, selecting the firmware upgrade page, uploading the firmware file, restarting for the upgrade to complete, and checking the firmware version to confirm success.

Uploaded by

rebelo.elton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

WL559E

Upgrading your WL559E’s Firmware

STEP 1: Downloading the Firmware from Aztech Website


a. Using your PC, open a web browser and go to www.aztech.com.
b. Click on Categories>Aztech Datacom.
c. From the Aztech Datacom Page, Click on Wireless Repeater.
d. Select WL559E from the Wireless Repeater Page.
e. In the WL559E page, scroll down the page, click on Downloads>Firmware

f. Click on the latest firmware available.


g. The firmware file will be saved as a zip file. Remember to unzip the file to
access the firmware file.

NOTE: It is important to only use official released Aztech Firmware

STEP 2: Initial Setup


To upgrade your firmware, ensure to connect a PC to your WL559E via
Ethernet Cable.

STEP 3: Accessing WL559E Web User Interface


Launch any web browser (Safari, Chrome, Internet Explorer, Microsoft Edge or
Mozilla Firefox) and key in 10.0.10.254 in the address bar to access the WL559E web
user interface.
STEP 4: Accessing Firmware Upgrade Page
On the Web User Interface, click on System>Firmware Upgrade. You will be
redirected to the Firmware Upgrade.

a.

b.

STEP 5: Uploading Firmware File


Click the Choose File button and locate the firmware upgrade file you have
downloaded from the Aztech Support Site. You may then click the Apply button to
confirm and start the firmware upgrade process.

NOTE: It will take approximately 3 mins for the upgrade to complete. It will then
follow by a reboot.
STEP 6: Firmware Upgrade Complete
Once the firmware upgrade is complete, you will be redirected to the Web User
Interface’s Homepage.

It is highly recommended to perform


a factory reset to ensure that all new
updates are successfully applied.
To do this, simple press the Reset
button of your WL559E for 5 seconds.

STEP 7: Confirming if firmware upgrade is successful


To confirm if the firmware upgrade process is successful, click on System > Device
Info. Check the Firmware Version. The Firmware Version number should match the
latest Firmware Version number available online.

NOTE: The firmware version number shown above is not necessarily the latest
firmware version number. It is just for example.

You might also like