Scribd
Upload
543 views4 pages

Remote Coding With Radmin VPN

The document provides instructions for installing and configuring Radmin VPN software on a computer and client computer. It describes creating a network with a name and password on the main computer, then joining that network from the client computer by entering the same name and password. It also mentions testing the connection by pinging the client computer's IP address from the main computer.

Uploaded by

ivo shterev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
543 views4 pages

Remote Coding With Radmin VPN

The document provides instructions for installing and configuring Radmin VPN software on a computer and client computer. It describes creating a network with a name and password on the main computer, then joining that network from the client computer by entering the same name and password. It also mentions testing the connection by pinging the client computer's IP address from the main computer.

Uploaded by

ivo shterev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1. Install Radmin VPN software on your computer and client computer.

Software download link (completely free):


https://www.radmin-vpn.com/
2. Configure Radmin VPN.
2.1 On your computer.
- Create a network with an arbitrary name and password.
 Network  Greate Network (Picture number 1&2).
 After creating a successful Network, you will see the Netwok name appear
(Picture number 2)
- Note: Network name must not be the same as the network name used on the Radmin VPN
server

-
2.2 On the client computer
- Join the previously created Network
 Network  Network join (Picture number 4).
 Enter the Network name, previously created password (Picture number 5).
 After joining the Network successfully, you will see the client's computer name
appear on your computer (Picture number 6).
 Test ping with the ip of the client computer, if there is a response, the connection
is successful, if you can't ping, turn off the firewall on the client computer
(Picture number 7&8)
 Use applications like RemoteEnet (e-sysX), RemoteConnect (BU), Portmap
forwarding... To forward ZGW IP.
 On your computer, can connect directly to IP (Port 6801) or VIN (Picture number
9)

You might also like