Microprocessors and Microcontrollers Solved MCQs (Set-4)
Microprocessors and Microcontrollers Solved MCQs (Set-4)
MCQs [set-4]
q M
78. The JS is called as c
A. jump the signed bit M
B. jump single bit
C. jump simple bit
D. jump signal it
Answer: A
79. Instruction providing both segment base and offset address are called
A. below type .
B. far type
C. low type
D. high type
Answer: B
81. The microprocessor determines whether the specified condition exists or not by
testing the
A. carry flag
B. conditional flag
C. common flag
D. sign flag
Answer: B
85. The 8086 fetches instruction one after another from of memory
A. code segment
B. IP
C. ES
87. The is required to synchronize the internal operands in the processor CLK
Signal
A. UR Signal
B. Vcc
C. AIE
D. Ground
Answer: A
89. The pin of minimum mode AD0- AD15 has _ data bus
A. 4 bit
B. 20 bit
C. 16 bit
D. 32 bit
Answer: C
92. The RD, WR, M/IO is the heart of control for a mode
A. minimum
B. maximum
C. compatibility mode
D. control mode
Answer: A
95. In max mode, control bus signal So,S1 and S2 are sent out in form
A. decoded
B. encoded
C. shared
D. unshared
Answer: B
96. The bus controller device decodes the signals to produce the control bus signal
A. internal
97. A Instruction at the end of interrupt service program takes the execution back
to the interrupted program
A. forward
B. return
C. data
D. line
Answer: B
98. The main concerns of the are to define a flexible set of commands
A. memory interface
B. peripheral interface
C. both (A) and (B)
D. control interface
Answer: A
99. Primary function of memory interfacing is that the should be able to read from
and write into register
A. multiprocessor
B. microprocessor
C. dual Processor
D. coprocessor
Answer: B