Assignment- 34

SECTION-I
Single Correct Answer Type 4 Q. [3 M (–1)]
1. A structure in the shape of letter H is formed with the help of three identical rods each of length
. The system can rotate along axis I. The angular speed of the system when plane of H becomes
vertical from its original position of rest along the horizontal, is:

3 g 2 g 1 g 3 g
(A) (B) (C) (D)
2 3 3 4

2. A uniform see-saw consists of a uniform thin plank of mass 'M' pivoted at its centre at a height
'h' above the ground. Initially a girl of mass 2M is sitting at one end of the see-saw. If a boy of
mass 3M now sits onto the other end, with what speed will this end hit the ground. (Angle  = 30°)

3gh 3gh 2gh

(A) 2 (B) (C) 3gh (D) 2
19 4 19

3. A uniform rod of mass M and length L is hinged at its lower end. The rod can rotate freely in
vertical plane and there is no friction at the hinge or at the ground. A ball of mass M and radius
L
R = is placed and a constant force F is applied as shown. The acceleration of centre of mass of
3
the rod initially is:

3F F 9F 3F
(A) (B) (C) (D)
4M M 8M M
Space for Rough Work

Assignment 1
4. A uniform rod AB of weight 100 N rests on a rough peg at C and a force F acts at A as shown in
figure. BC = CM, M is the midpoint of AB and tan = 4/3. The minimum coefficient of friction at C
is:

(A) 9/8 (B) 3/2 (C) 8/7 (D) 4/3

SECTION-II
Multiple Correct Answer Type 6 Q. [4 M (–1)]

5. Slender bar A is rigidly connected to a massless rod BC in Case 1 and two massless cords in
Case 2 as shown. The vertical thickness of bar A is negligible compared to L. In both cases, A is
released from rest at an angle  = 0. When  = 0°, Mark the CORRECT statement(s):

(A) The kinetic energy will be the same in both the cases.
(B) The speed of the centers of gravity will be same.

For Option (C) and (D) : Consider system to be at rest initially in vertical position. If bullet D strikes
A with a speed v0 initially directed horizontally and becomes embedded in it,

(C) The speed of the center of gravity of A immediately after the impact in case-1 will be larger.
(D) The speed of the center of gravity of A immediately after the impact in case-2 will be larger.

6. A particle of mass m is suspended from point O and undergoes circular motion

in horizontal plane as conical pendulum as shown in figure.
(A) Angular momentum of particle about point of suspension does not remains
constant.
(B) Angular momentum of particle about centre of circle remains constant.
2mg tan
(C) Average force during half rotation is .

(D) Average torque about axis OC during half rotation is zero

Space for Rough Work

Assignment 2
7. A thin uniform rod of mass m and length L is hinged at one end and is free to rotate in the vertical
plane. A small ball of mass m is fixed to the other end of the rod. A constant horizontal force
mg
F= is also acting on the rod at the free end when the rod is released from horizontal position
2
as shown in figure.

(A) Acceleration of the ball at the instant of releasing the rod is 9g/8
(B) Acceleration of the ball at the instant of releasing the rod is 3g/2
(C) The vertical component of reaction force exerted by the hinge when the rod has just been
5mg
released is
16
(D) The vertical component of reaction force exerted by the hinge when the rod has just been
9mg
released is
8

8. Two particles each of mass m are attached at end points of a massless rod AB of length l. Rod is
hinged at point C as shown. Rod is released from rest from horizontal position. At the instant when
rod reaches its vertical position as shown, which of the following is/are CORRECT :-

(A) Speed of the particle at B is thrice the speed of particle at A

6mg
(B) Net force on particle B is
5
(C) Angular acceleration of the system is zero
(D) Both x & y components of hinge force are nonzero

Space for Rough Work

Assignment 3
9. Two beads of mass m1 and m2 are connected by a light rigid rod. System is at
rest placed between a smooth wall and a rough floor having coefficient of
friction . Which of the following are correct? (T is the force exerted by the rod,
N1 is the normal force exerted by the wall, N2 is the normal force exerted by the
ground and f is the friction force exerted by the ground.)
  m 
(A) Minimum value of  so that system does not slip is cot–1   1 + 2  
 m1  
 
(B) N1 = Tcos
(C) N2 = (m1 + m2)g
(D) f = Tcos

10. A uniform rod of mass m, length 2 lies on smooth horizontal surface. A particle of mass m is
connected to string of length  whose other end is connected to rod. Initially string is taut and

string and rod are at . If particle is given velocity v0 perpendicular to string, then immediately
2
after choose the INCORRECT option(s) :

v20 6v 20
(A) Acceleration of COM of rod is . (B) Angular acceleration of rod is .
4 5 2

mv 20 v0
(C) Tension in string will be (D) Angular velocity of rod is
5 5
SECTION-III
Numerical Grid Type (Ranging from 0 to 9) 4 Q. [4 M (0)]

11. A unform rod of length 0.72 m is pivoted at one end and is hanging as shown. It receives a
horizontal impulse at a distance x cm below the pivot as shown. If impulse applied by the pivot
x
is zero, then find the value of   .
 12 

Space for Rough Work

Assignment 4
12. Mass of the pulley is m & radius is R. Assume pulley to be disc. Block of mass m is released from
the position shown. String is massless & inextensible. There is no slipping between rope and pulley.
2m gR
The impulse exerted by the string on the pulley at the moment string becomes taut is J.
J
is equal to.

13. There are two pulleys having radius 3R and R which can rotate freely. Third pulley is massless
string is also light. Find the ratio of angular acceleration of pulley having mass M to pulley having
mass 2M.

14. Some how a scientist created "No gravity" region below the broken line. Above the broken line
gravity is unchanged i.e. g downwards. If a hinged uniform rod is released from horizontal position
g
then its angular speed when it becomes vertical, is . Find 
4L

Space for Rough Work

Assignment 5
 SECTION-IV
Comprehension Type 3 Q. [M 3(–1)]
Paragraph for Question 15 to 17
A unform rod of mass M and length 3 R is initially stationary and is in vertical position inside a
frictionless, fixed hollow sphere of radius R. Now bar is released from rest from this position.

15. Find velocity of c.o.m when bar become horizontal

gR gR 1
(A) gR (B) (C) (D) g
2 3 gR

16. Angular velocity of bar when it becomes horizontal is:

2g g g g
(A) (B) (C) (D)
R R 2R 3R

17. Normal reaction exerted by sphere at one end of rod when rod is horizontal, is:
Mg
(A) mg (B) (C) 2Mg (D) 3Mg
2

________________________THANK YOU_________________________

Space for Rough Work

Assignment 6