www.thermal-grizzly.
com
PRODUCT DATA SHEET engineering. Of course, Thermal Grizzly Kryonaut
can also be used in a wide variety of other lines
Thermal Grizzly Kryonaut of industries. Thermal Grizzly Kryonaut is best
applied with the Thermal Grizzly applicator, but
Description: it can also be applied by way of brush, spatula,
Thermal Grizzly Kryonaut is a high performance silkscreen or pad printing.
thermal grease.
Storage:
Properties: Thermal Grizzly Kryonaut should be stored in its
Thermal Grizzly Kryonaut is an extremely high original packaging, in a dry environment at room
performance thermal grease, which shows its true temperature.
capabilities in cryogenic environments. Kryonaut
thermal grease sports high long time stability, all
without curing.
Applications:
Thermal Grizzly Kryonaut is best used with appli-
cations in need of high temperature resistance,
for example those in electrical or computer
Property Value/Description Property Value/Description
Viscosity 130 –170 Pas Colour light grey
Density 3.7g/cm³ Standard Sizes 3ml, 1,5ml, 1g
Application Temperature -250° C to 350° C Possible Thinkness variable
Electrical Conductivity* 0 pS/m Silicone based yes
Thermal Resistance 0.0032 K/W Typical Application CPUs, GPUs,
Consistency soft Notebooks, ICs
*following DIN 51412-1
All of these data were determined and confirmed with the technical facilities of http://overclocking.guide.
Trademark Information: tests and screening. No legally binding assurance
Thermal Grizzly is a registered trademark. of specific properties or applicability for a concrete
purpose should be derived from these data. Please
Please note: consider contacting us for further detail.
The data in this technical data sheet are based on
our current knowledge and experience. Due to the It is the responsibility of the recipient of our products
large amount of possible factors, this should not be to ensure that any proprietary rights and existing laws
construed as to release the users from doing their own and legislation are observed.
TGU20212309
Thermal Grizzly – High Performance Cooling Solutions
Egelpfuhlstrasse 44 · 13581 Berlin · Germany
Phone +49 - 40 - 53 27 88 50 · Fax +49- 321- 21 13 47 93
[email protected] CEO: Eike Salow · USt-IdNr. DE270324124
