Pulsar ®

PSB series power supply

Enclosed, switch mode buffer power supply 13,8V DC, without automatic operation control

CODE: PSB-15512110 v1.0/V EN

TYPE: PSB 13,8V/11A enclosed switch mode buffer power supply
Features of the power supply:

· DC 13,8V/11A uninterruptible power supply* · battery output is full protected against short-
· wide AC input voltage range 176÷264V circuit and reverse connection
· high efficiency 83% · LED optical signalisation
· controlling of battery charging and maintaining · protections:
· protecting of battery against excessive discharging · short-circuit protection SCP
(UVP) · over voltage protection OVP
· battery charging current 1A/4A, · surge protection
changed by jumper · overload protection OLP
· additional accessories: automation module · warranty – 2 year from the production date
MPSB12 (technical outputs):
· EPS technical output indicating AC power loss
· PSU technical output indicating PSU failure
· LoB technical output indicating battery low
voltage

DESCRIPTION
Buffer-type power supply units are intended for continuous power supply to devices that require stabilised voltage
of 12V DC (+/-15%). The power supply provides a voltage of U=13,8V DC with an output current of:

1. Output current of 10A + 1A battery charging*

2. Output current of 7A + 4A battery charging*
Total device current + battery: 11A max.*

In case of power voltage decay, prompt switching to battery supply occurs. The power supply unit is protected
against a short circuit, an overload, a surge or over voltage protection.
TECHNICAL DATA
Supply voltage 176÷264V AC
Current consumption 1,4A@230VAC max.
Supply power 155W max.
Efficiency 83%
Output voltage 11V÷ 13,8V DC – buffer operation
9,5V÷ 13,8V DC – battery operation
Output current tAMB<30°C 10A + 1A battery charging - see chart 1
7A + 4A battery charging - see chart 1
Output current tAMB=40°C 6,7A + 1A battery charging - see chart 1
3,7A + 4A battery charging - see chart 1
Voltage adjustment range 12÷14V DC
Ripple voltage 120mV p-p max.
Battery charging current 1A or 4A max.
Short-circuit protection SCP electronic
Overload protection (battery) OLP glass fuse
Surge protection varistors
Overvoltage protection OVP >16V (automatic recovery)
Excessive discharge protection UVP U<9,5V (± 5%) – disconnection of battery
Optical signalisation green LED- presence of AC voltage
Output of optical signalization LED AC- presence of AC voltage
LED DC- presence of DC voltage on power supply output
Additional accessories Module MPSB12 (technical outputs)
o o
Operation conditions 2-nd enviromental class, temperature: -10 C÷40 C
relative humidity 20%...90%, without condensation
Dimensions (LxWxH) 199 x110 x 50 [mm]
Net/gross weight 0,7kg / 0,8kg
Protection class EN 60950-1:2007 I (first) - requires a protective conductor (PE)
Declarations, warranty CE, 2 year from the production date
Connectors power-supply: Φ0,63÷2,5 I/O PCB: Φ0,41÷1,63
battery output BAT: 6,3F-2,5/40cm,
output of optical signalization: plug 3-pin 5 mm

* See chart 1

Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: [email protected]

 Pulsar ®

PSB series power supply

Enclosed, switch mode buffer power supply 13,8V DC, without automatic operation control

Output current vs temperature

Chart 1.
Allowable output current from the power
supply depending on ambient temperature.

Dimensions and fitting of the PSB-15512110 power supply

Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: [email protected]