Scribd
Upload
43 views2 pages

Datasheet Clorius M3F 3 Way Control Valve DN80 DN150

The document provides information about a 3-way control valve type M3F, including its applications for regulating liquid media, design with cast iron body and stainless steel spindle, function for mixing or diverting flow, and specifications for different sizes ranging from 80-150mm.

Uploaded by

Javier Conesa Outeda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views2 pages

Datasheet Clorius M3F 3 Way Control Valve DN80 DN150

The document provides information about a 3-way control valve type M3F, including its applications for regulating liquid media, design with cast iron body and stainless steel spindle, function for mixing or diverting flow, and specifications for different sizes ranging from 80-150mm.

Uploaded by

Javier Conesa Outeda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

3-way Control Valve type M3F

Cast iron, PN 10, DN 80 – 150 mm


0-2.3.09-J Page 1 of 2

APPLICATIONS

Control valves type M3F are designed for regulating of water, lubricating
oil and other liquid media and can be mounted in the pipe system as
either mixing or diverting valves. However when mounting as a diverting
valve the pressure drop is increased, compared with mounting as a
mixing valve. See “Important note” under Technical Data. The valves
are used in conjunction with our temperature regulators for controlling
1 (AB)
industrial processes, district and central heating plants and marine
installations.

DESIGN
The valve components - seats and cone are made of alu bronze, the
2 (A) spindle is made of stainless steel. The valve body is made of cast
iron EN-GJS-400-15 with flanges drilled according to EN 1092-2. The
3 (B) connection thread for the actuator is G1B ISO 228. The valves have
two balanced single seats. The leakage rate is less than 0.5% of the
full flow (according to VDI/VDE 2174). Tight between port 1(AB) og
3(B) is optional.

FUNCTION
TECHNICAL DATA
Without an actuator being installed, connection A-AB is fully open
Materials: and connection B-AB completely closed, by means of a spring. By
- Valve body Cast iron increasing pressure on the spindle, the opening of the ports changes
EN-GJS-400-15 proportionally to the travel of the spindle, and when the spindle is
- Seats and cone Alu Bronze
CuAL10Fe5Ni5
pressed to the bottom, connection B-AB is fully open and connection
- Spindle Stainless steel A-AB completely closed.
- O-ring 90 NBR
- Gasket Reinz-AFM34

Seating Two balanced FEATURES


single seats
Flow characteristic Almost linear
Leakage rate ≤ 0.5% of Kvs
Can be used for both mixing and diverting
Regulating capability Kvs/Kvr > 25 Simple design secures reliable controls and reduces costly downtime.
Flanges drilled Location of the pack box in the actuator makes the valve service friendly
according to EN 1092-2 PN 10
Counter flanges DIN 2632
Nominal pressure PN 10 (10 bar/max 120ºC,
option 9 bar/max 160 ºC)

For regulating of process and central heating


plants PRESSURE/TEMPERATURE DIAGRAM
According to DIN 2401
Important note
In case the valves are applied as diverting valves,
the pressure drop will increase by 35% and the
kvs-value will decrease by 14% as against mixing
valves.

Subject to change without notice.

74 www.cloriuscontrols.com
Page 2 of 2

PORT NUMBERING

The ports of valves type M3F are marked with the letters AB, A and B.

1
Port AB(1) common port always open
Port A(2) closes at load on spindle
Port B(3) opens at load on spindle

MOUNTING

The valve can be installed with vertical as well as horizontal spindles. The valve must be mounted in a way that
the valve actuator will be exposed to a minimum of moisture and unnecessary vibrations.

DIMENSION SKETCH

L L1 H H1 D (dia.) b k (dia.) d mm dia.


Type
mm mm mm mm mm mm mm (number)

80 M3F 310 155 180 127 200 20 160 18x(8)

100 M3F 350 175 195 141 220 22 180 18x(8)

125 M3F 400 240 245 171 250 24 210 18x(8)

150 M3F 480 270 280 189 285 24 240 22x(8)

SPECIFICATIONS

Flange Mixing valve Divertng valve


Opening Lifting height Weight
Type connection kvs-value kvs-value
mm mm kg
DN in mm m3/h m3/h

80 M3F 80 80 80 69 11 35

100 M3F 100 100 125 108 13 44

125 M3F 125 125 215 185 18 72

150 M3F 150 150 310 267 20 111

www.cloriuscontrols.com 75

You might also like