NC Tilting Rotary Tables Standard Models

TWA-100, 130, 160, 200/ TN-320

POWERFUL, HIGH SPEED TILTING TABLES

The TWA-Series tables are top of the line, high speed, high power, high
accuracy tilting rotary tables. The TN-101 and TWA-130 are ideal for
use on drilling and tapping machines.
TWA-130

Table Model TWA-100 TWA-130 TWA-160 TWA-200 TN-320

Tilt Range -17° ~ +107° -17° ~ +107° -30° ~ +110° -30° ~ +110° -30° ~ +110°
Spindle outer diameter mm 86h7 90h7 100h7 120h7 -
Table diameter (optional) mm (135) (135) (160 or 200) (200 or 250) 320
180 210 235 270
Table height at 0° position mm 355
(205 w/face plate) (235 w/face plate) (260 w/face plate) (300 w/face plate)
Center height at 90° position mm 135 150 180 210 255
Nose Diameter (w/ face plate) mm 55H7 (40H7) 55H7 (40H7) 55H7 (50H7) 65H7 (60H7) 105H7
Center bore
Thru Diameter mm 35 35 40 45 102
Table T-slot width 12H8 (w/ face plate) 12H8 (w/ face plate) 12H8 (w/ face plate) 12H8 (w/ face plate) 14H7
Guide block width 14h7 14h7 18h7 18h7 18h7
Rotary Tilt Rotary Tilt Rotary Tilt Rotary Tilt Rotary Tilt
Servo motor (Fanuc)*
Alpha 2i Alpha 2i Alpha 2i Alpha 2i Alpha 2i Alpha 2i Alpha 4i Alpha 4i Alpha 8i Alpha 8i
Maximum motor speed rpm 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 4,000 4,000
Speed reduction ratio 1/60 1/120 1/60 1/120 1/72 1/120 1/45 1/90 1/120 1/240
Maximum table speed rpm 83.3 41.7 83.3 41.7 69.4 41.7 111.1 55.5 33.3 16.7
Inertia converted into motor shaft x 10 kg.m2
-3
.072 .078 .074 .072 .17 .18 .38 .45 .82 .45
Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Pneumatic Hydraulic Hydraulic
Clamp system Pneumatic Pneumatic
Dual Taper Dual Taper Dual Taper Dual Taper Dual Taper Dual Taper @500 psi** @500 psi**
Nm 200 300 500 500 500 800 800 1,000 [2,200] [2,200]
Clamp torque @72psi [500 psi] (ft. lbs.) (147) (221) (369) (369) (369) (590) (590) (737) [(1,621)] [(1,621)]
Indexing accuracy arc sec. ±20 - ±20 - ±15 - ±15 - ±10 -
Tilting accuracy arc sec. - ±22.5 - ±22.5 - ±22.5 - ±22.5 - ±22.5
Net Weight kg (lbs.) 65 (143) 76 (167) 127 (279) 190 (418) 440 (968)
Allowable wheel torque - rotary Nm (ft. lbs.) 152 (112) 152 (112) 200 (147) 450 (332) 931 (686)
Allowable work inertia kg.m2 .08 .08 .19 .59 1.53

0° tilt W kg 35 35 60 120 150

angle (lbs) (77) (77) (132) (264) (330)
Allowable
work weight 0° ~ 90°
kg 20 20 40 70 100
tilt
W (lbs) (44) (44) (88) (154) (220)
angle
L
Allowable Nm 24 24 39.2 53.7 163.3
work moment W
(ft. lbs.) (17.7) (17.7) (28.9) (39.6) (120.4)

F
N 3,920 3,920 7,840 13,720 19,600
(lbf) (878) (878) (1,756) (3,073) (4,390)

Allowable F
Nm 200 500 500 800 2,200
load when L
(ft. lbs.) (147) (369) (369) (590) (1,621)
table clamped
F
Nm 300 500 800 1,000 2,200
L
(ft. lbs.) (221) (369) (590) (737) (1,621)

* Other motors & RPM available • ** Booster optional • Specifications subject to change without notice
44
komaprecision.com • [email protected] • 1-800-249-5662
 NC Tilting Rotary Tables Standard Models
Dimensions Drawings not to scale • Dimensions = mm
TWA-100 WORKPIECE MOUNTING SPACE FOR TILTING ROTARY TABLES

194 498
180 220 278 0 ~+90o 0 ~+107o -17o~ 0
81 80
Ø 86
TWA-100
284

135 45
220
384

343

221

220
0 ~+90o 0 ~+107o -17o~ 0
100

100
180 134 147

TWA-130
201 0 ~+90o 0 ~+110o -30o~ 0
524
180.5 182 242 282
91.5 80
Ø 90
284

60
220

235
236

0 ~+90o 0 ~+110o -30o~ 0

384

343

150
90

90

211 134 148

TWA-160 0 ~+90o 0 ~+110o -30o~ 0

156
185 577
115 103
196

100h7
105
240
466

Note: To ensure workpiece, rotary table, and machine tool integration,

386
145

285

285

contact KOMA for 3D CAD support.

180
110
125

264 161 152

TWA-200 TN-130
173 Pull Stud Option
227 701
178

120h7
173
267
483

459
160

383
341

210
173
145

284 192 225

TN-320 Options & Accessories

TPC NC Controller p.62
35 261
157 895 Chucks p.74
Ø 320 Tailstock p.75
Support Spindle p.77
195
456

Face Plate p.77

100
341
656

450

425

Encoder / Scale p.78

255

Pull Stud Device p.79

Rotary Joint p.79
180
200

30 380 240 245 Booster p.80

PVC or Steel Cables p.81
The dimensions above are for tables with a FANUC servo motor. Other motors available (dimensions may increase).

Clamping Block and Bolt Dimensions = mm Layout a Layout b

Type Q’ty Layout T-Slot Width A B C D E F G H I J K L M
a
TWA-100 I 4 b 14 20 12 70 10 35 25 20 12 8 50 35 23 12
a
TWA-130 I 4 b 14 20 12 70 10 35 25 20 17 8 55 35 23 12 Type I
a C K
TWA-160 I 4 b 18 20 12 70 10 35 25 17 15 11 55 35 28 16
a
B

TWA-200 I 4 18 25 12 80 12 33 35 22 21 11 65 40 28 16
H

b
A

J
G

a ØM
TN-320 I 4 b 18 25 12 80 12 33 35 22 21 11 65 40 28 16
I

D E F 
L
Note 1: In the case of layout B, contact us for details about mounting.
Note 2: When using a machine with a T-slot pitch other than the above, use suitable clamping blocks and bolts that are available on the market, or order custom-made ones from KOMA (opt.)
45
komaprecision.com • [email protected] • 1-800-249-5662
H
25
J