ADELTA Part No. 422-32-655-0004 Dated 11-10-83, CUTTING CROWN MOULDING WITH DELTA FRAME & TRIM SAWS AND COMPOUND MITER SAWS Cutting the more popular 52/38 degree ceiling/wall angle crown moulding, shown in Fig. 1, is a fast and easy operation when using Delta Frame & Trim Saws and ‘Compound Miter Saws, when the angle between the walls is 90degrees. With Frame8& Trim Saws, a buil-n miter stop at 31.62 degrees right and left, and a bevel indicator at 33.86 degrees is provided. With Compound Miter Saws, the miter angle of 31,62 degrees right andleft, andthe bevel angle of 33.86 degrees is provided on the miter and bevel scales by means of a triangle indicator. Ii the angle between the walls is other than 90 degrees or ityou are using 45/45 degree celling/wall crown moulding, as shown in Fig. 2, different miter and bevel settings of the blade are necessary. The following chart illustrates the miter and bevel angle settings of the saw blade for both 52/38 degree and 45/45 ‘degree crown moulding, when the angle between the walls range from 67 degrees to 179 degrees as shown in Fig. 3 CEILING Fig. 2 ANGLE BETWEEN WALLS.52/38° CROWN MOULDING. 45/45° CROWN MOULDING ‘ANGLE MITER BEVEL MITER BEVEL BETWEEN WALLS| SETTING SETTING SETTING SETTING 67: 42.93" 41.08" 46.89" 36.13 68" 42,39" 40.79" 46.35" 35.89" 69" 41,85" 40.50" 45.81" 35.64" 70° 41.32" 40.20° 45.28° 35.40" 7° 40.79" 39.90" 44.75" 35.15" 72° 40.28" 39.61" 44.22 34.89" 73° 39.76" 39.30" 43.70" 34.64" 74" 39.25" 39.00 43.18" 34.98" 75° 38.74" 38.69° 42.66" 34.12" 78 38.24" 38.39" 42.15" 33.86" a 37.74 38.08" 41.64" 33.60" 78° 37.24" 37.76" 41.13" 33.33" 79° 36.75° 37.45" 40.62" 33.07" 80" 36.27" 37.13" 40.12" 32.80" aie 35.79" 96.81" 39.62" 32.53" 82° 35.31° 36.49" 39.13° 32.25" 83° 34.83° 36.17" 38.63° 31.98° a4" 34.36" 35.85" 38.14" 31.70" 85° 33.90" 35.52" 37.66" 31.42" 86° 33.43" 35.19" 3747" 3114" 87° 32.97° 34.86" 36.69" 30.86" 88" 32.52" 34.53° 36.21° 30.57° 89" 32.07" 34,20" 35.74" 30.29° #90" #31.62" 33,86" 35.26° :30.00° 91° 317 33.53" 34.79" 29.71" 92° 30.73" 33.19° 34.33" 29.42° 93° 30.30" 32.85" 33.86" 29.13" 94° 29.86" 32.51" 33.40" 28.83° 95° 29.43" 32.17° 32.94" 28.54" 96° 29.00" 31.82 32.48" 28.24" Ea 28.58° 31.48" 32.02" 27.98" 98° 28.16" 31.13" 31.58" 27.64" 99° 27.74 30.78" 3113" 27.34" 100° 27.32" 30.43" 30.68° 27.03" 101° 26.91" 30.08° 30.24" 26.73" 102" 26.50" 29.73" 29.80" 26.42" 103° 26.09" 29.38" 29.36" 26.12° 104° 25.69" 29.02" 28.92" 25.81° ‘& POSITIVE MITER STOP AND BEVEL INDICATOR PROVIDED ON FRAME & TRIM SAWS. TRIANGLE INDICATORS PROVIDED ON SCALES OF COMPOUND MITER SAWS. 252/38° CROWN MOULDING 45/45° CROWN MOULDING ANGLE MITER BEVEL MITER BEVEL BETWEEN WALLS. SETTING SETTING SETTING SETTING 105° 25.29" 28.67" 28.48" 25.50" 106° 24.89° 28.31" 28.05" 25.19" 107° 24.49" 27.95" 27.62° 24.87° 108° 24.10° 27.59° 27.19" 24.56" 109° 23.719 27.23° 26.77" 24,24° 110° 23.32" 26.87° 26.34" 23.93" 111° 22.93° 26.51" 25.92" 23.61" 112° 22.55" 26.15" 25.50" 23.29° 113° 22.17" 25.78 25.08" 22.97° 114° 21.79" 25.42" 24.66° 22.65° 115° 21.42" 25.05" 24.25° 22.33° 116" 21.04" 23.84° 22.01° 17 20.67" 23.43" 21.68" 118° 20.30° 23.94° 23.02" 21.36" 119° 19.93" 23.57" 22.61° 21.03" 120° 19.57" 23.20" 22.21° 20.70" 121° 19.20° 22.83" 21.80" 20.98" 122° 18.84" 22.46" 21.40" 20.05" 123° 18.48° 22.09" 21.00" 19.72" 124° 18.13° 2171" 20.61" 19.39" 125 IIT" 21.34" 20.21" 19.06" 126° 17.42" 20.96 19.81" 18.72" 127° 17.06" 20.59" 19.42" 18.39" 128° 16.71" 20.21% 19.03" 18.06" 129° 16.37" 19.83" 18.64" 17.72" 130° 16.02" 19.45" 18.25° 17.39" 131° 15.67" 19.07" 17.86" 17.05" 132° 15.33" 18.69" 17.48" 16.71° 133° 14.99" 18.31° 17.09° 16.38" 134° 14.65" 17.93" 16.71° 16.04° 135° 14.30" 17.55" 16.32" 15.70" 136° 13.97° 47.47" 15.94° 15.36" 137° 13.63" 16.79" 15.56" 15.02" 138° 13.30° 16.40° 15.19° 14.68" 139° 12.96" 16.02" 14.81" 14.34" 140° 12.63° 15.64° 14.43° 14.00" 141° 12.30° 15.25° 14.06" 13.65" 142° 11.97° 14.87" 13.68" 13.31°52/38° CROWN MOULDING 45/45° CROWN MOULDING. ANGLE MITER BEVEL MITER BEVEL BETWEEN WALLS. SETTING SETTING SETTING SETTING 143° 11.64" 14.48" 13.31° 12.97" 144° 11.31" 14.09" 12.94° 12.62" 145° 10.99° 13.71" 12.57° 12.28" 146° 10.66" 13.32" 12.20° 11.93" 147° 10.34" 12.93" 11.83° 11.59" 148° 10.01° 12.54" 11.46° 11.24" 149° 9.69° 12.16" 11.09° 10.89" 150° 937° W77° 10.73" 10.55" 151° 9.05" 11.38" 10.96" 10.20° 152° 873° 10.99° 10.00" 9.85" 153° eat? 10.60" 9.63° 9.50 154° 8.09" 10.21° 927° 9.15" 155° 77° 9.82" 391° 8.80° 156° 7.46" 9.43" 855° 8.45" 157° 714 9.04" 819° 8.10" 158° 6.82" 8.65" 783° 175° 159° 651° 8.26° 747° 7.40" 160° 6.20" 7.86 741? 7.05° 161° 5.88" 747? 6.75" 6.70° 162° 557° 7.08" 6.39" 6.35° 163° 5.26" 6.69" 6.03" 6.00". 164° 495° 6.30" 5.68" 5.65" 165° 4.63" 5.90" 5.32° 5.30" 166° 4.32" 551° 4.96" 494° 167° 401° 5.12° 461° 5.59" 168° 3.70 472° 425° 424° 169° 3.99° 433° 3.90" 3.89° 170° 3.08° 3.94" 3.54" 353° 171°, 277 354° 319° 3.18° 172° 247° 3.15" 2.83" 2.83" 173° 2.15" 2.75° 2.48" 247° 174° 1.85° 2.36° 212° 212° 175° 1.54" 1.97" 177° 477° 176° 1.23° 1.58" 1.41? 141? 177° 92° 1.18 1.06 1.06" 178° 62" 79° me n° 179° 31° 38 35° 35°CUTTING CROWN MOULDING One of the many features of your saw is the ease of cutting crown moulding. The following is an example of cutting both inside and outside corners on 52/38 degree wall angle crown moulding. NOTE: When cutting 45 degree wall angle crown moulding, the following procedure for inside and outside corners is the same with the exception that the bevel position will always be at 30 degrees and the miter position will be 35.25 degrees to the right or left. 1. Move the table to the 31.6 degree right miter position and lock the table in position. NOTE: A triangle indicator is provided on the miter scale to find this angle quickly (Fig. 38) 2. Tilt the saw blade to the 33.9 degree left bevel Position and tighten bevel lock handle. NOTE: A triangle indicator is provided on the bevel scale to find this angle quickly (Fig. 39). 3._ Place the crown moulding on the table with the CEILING EDGE of the moulding against the fence, and make the cut (Fig. 38). NOTE: The piece of crown moulding used for the outside corner will always be on the right hand side of the blade (A) Fig. 38. The piece of ‘crown moulding used for the inside corner will always be Cn the left hand side of the blade (B) Fig. 38. 4, To make the matching halves of the inside and outside comers, rotate the table to the 31.6 degree left miter position and tighten table lock handle. NOTE: A triangle indicator is provided on the miter scale to find this angle quickly (Fig. 39). 5. Place the crown moulding on the table with the WALL EDGE of the crown moulding against the fence and make the cut. Again, the piece of crown moulding used for the outside corner will always be on the right side of the blade (C)Fig. 39. The piece of crown ‘moulding used for the inside corner will always be on the left side of the blade (0) Fig. 39. 6. Fig. 40 illustrates the two outside corner pieces - (A) being the piece cut at (A) Fig. 38, and (C) being the piece cut at (C) Fig. 39. 7. Fig. 41 illustrates the two inside comer pieces - (6) being the piece cut at (8) Fig. 38, and (0) being the piece cut at (0) Fig. 39 16 Fig. 41