Scribd
Upload
66 views

Cempatch AB - TDS

Cempatch AB is a one component modified acrylic liquid polymer formulated for use as a bonding agent and curing aid for cementitious concrete repair systems. It provides high bond strength and is suitable for use internally and externally as a primer, bonding agent, and curing aid. Cempatch AB complies with relevant ASTM standards.

Uploaded by

Sudhanshu Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views

Cempatch AB - TDS

Cempatch AB is a one component modified acrylic liquid polymer formulated for use as a bonding agent and curing aid for cementitious concrete repair systems. It provides high bond strength and is suitable for use internally and externally as a primer, bonding agent, and curing aid. Cempatch AB complies with relevant ASTM standards.

Uploaded by

Sudhanshu Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Cempatch AB

Acrylic bonding and curing agent for cement mixes and concrete repair

Description
Technical Properties @ 250C:
Cempatch AB is a one component modified acrylic liquid
Tensile bond strength: 2.5 MPa @ 7 days
polymer specially formulated for use as a bonding agent
and curing aid for cemen ous concrete repair systems. Colour: White emulsion
Cempatch AB is designed for maximum performance
under the alkaline condi on of cement mixes. 10 - 20 min @ 40oC
Film forming me
30 - 50 min @ 25oC
range:
60 - 120 min @ 15oC
Applications
Curing efficiency: > 55%
Cempatch AB is ideally designed for use as a primer and
curing aid for Cempatch cemen ous repair systems and Slant shear strength:
as a bonding aid for bonding fresh to old concrete. ASTM C1042-99
Type I (dry) > 6 MPa
Advantages VOC: < 15 g/ltr

 One component, easy to use. Note: Film forming me range is also affected by
 High bond strength provides excellent adhesion when rela ve humidity and wind
used as a bonding agent for cement based mixes and
Cempatch cemen ous repair systems. Application
 Suitable for use in hot areas.
 Can be used internally and externally. 1) As a priming bonding agent:
 Can be used as a curing agent elimina ng the need for Cempatch AB should be brushed vigorously into the
water curing. presoaked surface making sure to fill all pores and voids.
Ensure the repair mortar is applied when the film is
Standards formed and is s ll tacky as men oned above.

Cempatch AB complies with ASTM C1059–99, Type 1, 2) As a curing aid:


when tested in accordance with test method ASTM Cempatch AB can be used as a curing aid over cemen ous
C1042. repair mortars to prevent rapid evapora on of water. In
severe hot weather condi ons or in windy situa ons,
Method of Use the use of high efficiency curing agent such as Setseal 44
should be considered.
Substrate Preparation
Cleaning
The substrate should be sound, clean and free from
contamina on. Surface laitance should be removed by All tools should be cleaned immediately a er use with
light scabbling or grit blas ng. Corroded steel should be fresh clean water. Hardened materials should be cleaned
fully exposed and cleaned to bright condi ons by grit mechanically.
blas ng or by wire brush. Exposed steel reinforcements
should be protected by applying one full unbroken coat Packaging
of zinc rich epoxy such as Repcoat ZR and allowed to dry.
All surfaces should be presoaked with clean water prior Cempatch AB is available in 5 and 18 litre packs.
to applying Cempatch AB.
Coverage

Approximately 5 – 8 m²/litre when used as a primer.


Approximately 4 – 6 m²/litre when used as a curing aid.
Cempatch AB
Storage More from Don Construction Products

Cempatch AB has a shelf life of 12 months from date of A wide range of construc on chemical products are
manufacture if stored in a shaded place at a temperature manufactured by DCP which include:
of 25°C in original unopened packaging.
 Concrete admixtures.
If these condi ons are exceeded, DCP Technical  Surface treatments
Department should be contacted for advice.  Grouts and anchors.
 Concrete repair.
Cautions  Flooring systems.
 Protec ve coa ngs.
Health and Safety  Sealants.
 Waterproofing.
Cempatch AB should not be swallowed. Gloves and eye  Adhesives.
protec on should be worn.  Tile adhesives and grouts.
 Building products.
In case of accidental contact with eyes, immediately flush  Structural strengthening.
with plenty of water for at least 10 minutes and seek
medical advice.

For further informa on refer to the Safety Data Sheet.

Fire

Cempatch AB is not flammable.

09-0001-A-2021

You might also like