Passenger car engine oils - Fully Synthetic
Eurol Protence 5W-30 GN II
Fully synthetic motor oil
Description
Eurol Protence 5W-30 GN II comprises is a fully synthetic Eurol Protence 5W-30 GN II offers improved fuel
range of motor oils for gasoline engines in passenger economy and fuel economy retention resulting in lower
cars. This oil can be used in cars equipped with catalytic emissions. Furthermore it is compatible with gasoline
converters, turbo charged engines, and direct injection fuels containing up to 85% ethanol (E85). Eurol Protence
systems, where Dexos 1 Gen 2, API SN (as well as SJ, SL 5W-30 GN II is suitable for modern hybrid cars for car
and SM) or ILSAC GF-5 (as well as GF-2,-3 and-4) is brands like Toyota, Honda and Lexus.
prescribed.
Eurol Protence 5W-30 GN II can be used where GM
Eurol Protence 5W-30 GN II has the second generation dexos1 is prescribed.
Dexos1 specification, which provides better vehicle
performance as well as low speed pre-ignition (LSPI) For certain severe applications, such as stop-and-go or
protection, particularly for small displacement turbo- heavy loads, drain intervals should be reduced
charged engines. significantly, as being mentioned in some manuals.
Eurol Protence 5W-30 GN II controls high temperature If the quality needed for a specific vehicle is not
oxidation and deposits and prevents sludge and varnish mentioned under "performance level", the applicability
formation from surfaces. Eurol Protence 5W-30 GN II of this oil should be checked, in the manufacturers
meet the highest 2015 U.S. standards for engine wear advice, or in the Eurol Product Advisor on
protection. www.eurol.com
Specifications
Performance level
API SN
ILSAC GF-5
dexos1™: 2015
Recommended for use
GM Dexos 1
Physical properties
Colour Brown
Density at 20°C 0.844 kg/l ASTM D 1298
Viscosity, kinematic at 40°C 63.7 cSt ASTM D 445
Viscosity, kinematic at 100°C 11.6 cSt ASTM D 445
Viscosity Index 179 ASTM D 2270
Viscosity, dynamic (CCS) 3731 cP ASTM D 2602
Base number 8.2 mg KOH/g ASTM D 2896
Sulphated ash 0.9 wt% ASTM D 874
Flash point 220 °C ASTM D 93
Pour point -46 °C ASTM D 97
Available in 60L, 210L, Bulk
E100255
Version 1.0, 05-10-2017
This sheet contains recommendations or suggestions on properties and possible applications of Eurol products. Because of continuous product research and development, the information in
this document can be changed at all times, without foregoing notice. The analytical information in this document consists of typical incorrectness of the text. The reader is advised to make the
final product choice in dialogue with the supplier.
Eurol B.V. Energiestraat 12, 7442 DA Nijverdal, Netherlands, tel. +31 88 250 22 00, fax +31 548 61 01 95, [email protected], www.eurol.com
