Magnetically Coded Sensors
BML-S1G0-S77D-M5EQ-D0-S284
Ordercode: BML0767
1) not included in scope of delivery 2) Distance to tape 3) Tape 4) LED function indicator 5) Active measurement surface
EN 61000-4-4, Burst Severity Level 3
EN 61000-4-5, Surge Severity Level 2
Display/Operation
EN 61000-4-6, High-frequency fields Severity Level 3
Function indicator LED green EN 61000-4-8 Magnetic fields Severity Level 5
LED yellow
LED red Ext. magnetic fields max., in operation 1 mT (no effect)
Protection type IEC 60529 (connector) IP67
Relative humidity ≤ 90 %, non-condensing
Electrical connection Storage temperature -25…85 °C
Temperature coefficient, overall system 10.5 ppm/K
Connection Connector, M12x1-Male, 12-
pole
Connection version axial
Polarity reversal protected no Functional safety
MTTF (40 °C) 88 a
Electrical data
Current consumption max. at 24 V DC 70 mA General data
Current consumption max. at 5 V DC 220 mA Additional features 01 Real-time capable
Hysteresis H max. 2 µm Application linear/rotary motion
Operating voltage Ub 4.75…5.25 VDC/10…28 VDC Approval/Conformity cURus
Overvoltage protection no CE
EAC
Power consumption ≤ 1.5 W (no load) WEEE
Switch-on delay max. 1000 ms Measuring principle absolute measuring system
Voltage-proof up to (GND to housing) 500 V DC Series S1G
Environmental conditions Material
Altitude max. 2000 m Housing material Die-cast zinc
Ambient temperature -20…70 °C Housing material, surface protection nickel plated
EN 55016-2-3, Radiation Industrial areas Chrome-plated
EN 60068-2-27, Continuous shock 150 g, 2 ms
EN 60068-2-27, Shock 100 g, 6 ms
EN 60068-2-6, Vibration 20 g, 10…2000 Hz Mechanical data
EN 60068-2-64, Noise 20 g, 5…2000 Hz Diameter min. 243 mm
EN 61000-4-2, ESD Severity Level 4 Dimension 16 x 18.5 x 80.3 mm
EN 61000-4-3, RFI Severity Level 3 Lateral offset (Y) ±0.5 mm
Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-07-05 1(2)
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice [254555] ETIM 6.0: EC002544
Balluff USA 1-800-543-8390 BML0767_0.23_2019-01-22
Balluff China +86 (0) 21-50 644131
Magnetically Coded Sensors
BML-S1G0-S77D-M5EQ-D0-S284
Ordercode: BML0767
Mounting Through-hole 4.3 mm Signal sequence A before B = rising
Pitch max. ±0.5 ° SSI clock frequency max. 900 kHz
Pole width 2 mm SSI clock frequency min. 70 kHz
Procedure direction Lengthwise to tape SSI data 1x error bit
Roll max. ±0.5 ° 1x null bit
23x position
Tangential offset (X) max. ±0.5 mm
Weight 78 g
Yaw max. 0.2 ° Range/Distance
Edge separation min. 0.11 µs
Output/Interface Interpolation factor 2000
Measuring range 4m
Bits, number 25 Bit
Non-linearity of sensor head, max. ±2 µm
Clock RS422 differential signal
Optimal read distance 0.4 mm
Count direction rising
Read distance 0.01…0.8 mm
Differential signals yes
Repeat accuracy ≤ 1 µm
Error signal yes
Resolution 1 µm
Interface SSI
Digital A/B (RS422) Traverse speed max. 5 m/s
Interface coding Gray For more information about MTTF and B10d see MTTF / B10d Certificate
Preset configurable via hardware PIN Indication of the MTTF- / B10d value does not represent a binding composition
or software tool and/or life expectancy assurance; these are simply experiential values with no
Real-time signals Digital A/B, RS422 warranty implications. These declared values also do not extend the expiration
period for defect claims or affect it in any way.
Connector view
Wiring Diagram
Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-07-05 2(2)
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice [254555] ETIM 6.0: EC002544
Balluff USA 1-800-543-8390 BML0767_0.23_2019-01-22
Balluff China +86 (0) 21-50 644131
