Scribd
Upload
151 views

Checklist I MS Fabrication

The document provides a checklist for metal fabrication that includes general inspection items, project-specific items, and spaces for comments and sign-off. It lists items to check such as templates, provisions for bracing, proper finishing, welding defects, and installation techniques. The checklist is to ensure materials are from approved drawings and meet specifications for fabrication, installation, and workmanship.

Uploaded by

TANMOY SAHA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
151 views

Checklist I MS Fabrication

The document provides a checklist for metal fabrication that includes general inspection items, project-specific items, and spaces for comments and sign-off. It lists items to check such as templates, provisions for bracing, proper finishing, welding defects, and installation techniques. The checklist is to ensure materials are from approved drawings and meet specifications for fabrication, installation, and workmanship.

Uploaded by

TANMOY SAHA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Checklist for Metal fabrication

Div. Metal Fabrications Date:


Project: Medanta Super Specialty Hospital Patna Status
Comments
*OK = General Inspection NA = Not Applicable *OK NA

General items checklist Where applicable to this


section.
Delivered materials Fabricated from approved shop
drawings, if required, and meet specifications of steel
1
fabrication, riveting, welding, galvanizing, sheet metal or
other metals required.
Templates Provided for correct placement and
2
anchorage if required.
Provisions For adequate bracing, blocking and
3
anchorage of items.
Sleeves, bolts, cut-outs, holes and connectors Located
4
and provided as required.
Protection Materials are protected from damage before
5
and after installation.
Opening bucks, angles and thresholds Adequately
6
braced, anchored and aligned and bear labels if required.
Railings Check that heights, vertical spacing, returns
7 and anchorage will meet code requirements after
installation.
a) Fixed in Line
b) Fixed in Level
c) Proper in Shape
d) Edge Rounding
e) Finishing
f) Welding
i) Defect Free
ii) Slag / Inclusion Free
g) Overall Finishing
h) Final Enamel Paint
Installation techniques and workmanship Smooth
and ground welds touch up. Caulking, galvanizing, touch-up
8
shop coats etc

Sl. Not
Description of Item Poor Satisfactory Remarks
No. Satisfactory
1. Use Specified Materials
a) MS. Plate
b) MS Square Bar
c) MS Hollow Tube
d) Nuts & Bolts

pg. 1
Checklist for Metal fabrication
Project-Specific Items:

Comments:

Inspected. OK to proceed.

C&W Rep: _ Date: _

Contractor Rep: Date:

pg. 2

You might also like